Low Fracture Research Articles

A case management strategy to reduce falls in older people with a history of falls: A randomized controlled trial

The present study aimed to determine whether a remotely delivered intervention, based on an individual case management, can reduce falls and their consequences in community-dwelling older people with a history of multiple falls. In this randomized controlled trial, 32 participants were randomized to the intervention group, which comprised a 16-week case management program involving a multidimensional assessment, targeted interventions according to the identified fall risk factors, and development of individualized care plans. The intervention was performed by trained gerontologists, under weekly supervision of professionals with experience in falls. The control group (n = 30) received usual care. Falls were monitored over 12 months with monthly falls calendars and telephone calls. Remotely delivered case management presented an 82 % uptake of recommendations. There was a trend toward a reduced fall incidence in the intervention vs control group, with lower fall, fall injury and fracture rates in the intervention group compared with the control group at both the 16-week and 12-month time-points, with the difference statistically significant for injurious fall rates at 12 months - IRR=0.18 (95 % CI = 0.04 to 0.74).

Synthetical improvement of dynamic mechanical property and toughness for precast concrete element based on optimization design of composition and curing regime

The brittleness and toughening measures of steam-cured concrete are currently less researched aspects. This study focuses on exploring the improvement in the toughness of steam-cured concrete and evaluating its influence on dynamic mechanical properties through a series of macroscopic performance tests. These tests include four-point bending tests, three-point bending fracture tests, uniaxial compression tests, and drop hammer impact tests, all conducted from the perspective of optimizing composition materials and steam curing regimes. The experimental results indicate that, under a relatively short heating time and a prolonged constant temperature curing period, the pure cement steam-cured concrete (S1 group), compared to the S2 group which used 20 % FA and 10 % GGBS to replace cement while also increasing the aggregate content with a modified steam curing regime, exhibited higher strength and elastic modulus but also showed greater brittleness. For example, the damping ratio increased to 0.6–0.7, the flexural-to-compressive strength ratio exceeded 6, and the number of specimens damaged by drop hammer impact significantly decreased, and the notch specimen exhibits lower peak load and displacement during fracture, with generally lower fracture parameter values. The fracture energy of the S2 group is 100–130 N·m-1 higher than that of the S1 group, reaching approximately 670 N·m-1, and the ductility index increased by 0.3–0.4. This research can provide technical support for the high-quality preparation of precast components using steam-cured concrete and offer a theoretical basis for reducing the brittleness of steam-cured concrete.

Primary Closure of External Fixator Pin Sites Is Safe After Orthopaedic Trauma Surgery.

To determine if rates of pin site infection and surgical site infection among patients managed with primary closure after external fixator removal were similar to those allowed to heal secondarily. Retrospective cohort. Urban/Suburban Academic Level I Trauma Center. Patients who had received a lower extremity external fixator for provisional management before definitive fixation of lower extremity fractures were included with pin site wounds closed primarily or allowed to heal by secondary intention. The rate of pin tract infection and surgical site infection following primary closure of external fixator pin sites relative to patients whose pin sites were allowed to heal through secondary intention. In total, 256 patients were evaluated: 143 patients (406 pin sites) in the primary closure group and 113 patients (340 in sites) in the secondary closure group. The average age was 49 ± 16 years. Sixty-five percent of included patients were male. There was no difference in pin tract infections between cohorts (primary = 0.5%, secondary = 1.5%, P = 0.26). External fixator duration in the primary closure group was 11.5 ± 8.4 days and 13.0 ± 8.1 days in the secondary closure group (P = 0.15). There was a greater rate of surgical site infections in the secondary intention cohort (15.9% vs. 7.7%, P = 0.047). There was no difference in pin site infection rate after primary pin site closure relative to patients who were allowed to heal through secondary intention. Furthermore, there was a lower rate of surgical site infection after primary closure. These results challenge the dogma of secondary closure for ex fix pin sites, suggesting that debridement and primary closure is a safe option for management of external fixator pin sites and may impart benefit in decreasing infection risk. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Computational biomechanical study on hybrid implant materials for the femoral component of total knee replacements

Multifunctional materials have been described to meet the diverse requirements of implant materials for femoral components of uncemented total knee replacements. These materials aim to combine the high wear and corrosion resistance of oxide ceramics at the joint surfaces with the osteogenic potential of titanium alloys at the bone-implant interface. Our objective was to evaluate the biomechanical performance of hybrid material-based femoral components regarding mechanical stress within the implant during cementless implantation and stress shielding (evaluated by strain energy density) of the periprosthetic bone during two-legged squat motion using finite element modeling. The hybrid materials consisted of alumina-toughened zirconia (ATZ) ceramic joined with additively manufactured Ti–6Al–4V or Ti–35Nb–6Ta alloys. The titanium component was modeled with or without an open porous surface structure. Monolithic femoral components of ATZ ceramic or Co–28Cr–6Mo alloy were used as reference. The elasticity of the open porous surface structure was determined within experimental compression tests and was significantly higher for Ti–35Nb–6Ta compared to Ti–6Al–4V (5.2 ± 0.2 GPa vs. 8.8 ± 0.8 GPa, p < 0.001). During implantation, the maximum stress within the ATZ femoral component decreased from 1568.9 MPa (monolithic ATZ) to 367.6 MPa (Ti–6Al–4V/ATZ), 560.9 MPa (Ti–6Al–4V/ATZ with an open porous surface), 474.9 MPa (Ti–35Nb–6Ta/ATZ), and 648.4 MPa (Ti–35Nb–6Ta/ATZ with an open porous surface). The strain energy density increased at higher flexion angles for all models during the squat movement. At ∼90° knee flexion, the strain energy density in the anterior region of the distal femur increased by 25.7 % (Ti–6Al–4V/ATZ), 70.3 % (Ti–6Al–4V/ATZ with an open porous surface), 43.7 % (Ti–35Nb–6Ta/ATZ), and 82.5% (Ti–35Nb–6Ta/ATZ with an open porous surface) compared to monolithic ATZ. Thus, the hybrid material-based femoral component decreases the intraoperative fracture risk of the ATZ part and considerably reduces the risk of stress shielding of the periprosthetic bone.

HSD3B1 genotype and outcomes in metastatic hormone-sensitive prostate cancer with androgen deprivation therapy and enzalutamide: ARCHES

HSD3B1 encodes 3β-hydroxysteroid dehydrogenase-1, which converts adrenal dehydroepiandrosterone to 5α-dihydrotestosterone and is inherited in adrenal-permissive (AP) or adrenal-restrictive forms. The AP allele is linked to castration resistance, mainly in low-volume tumors. Here, we investigate the association of HSD3B1 alleles with outcomes in ARCHES, a multinational, double-blind, randomized, placebo-controlled phase 3 trial that demonstrated clinical benefit with enzalutamide plus androgen deprivation therapy (ADT) in men with metastatic hormone-sensitive prostate cancer (mHSPC) compared to those treated with placebo plus ADT. There are no significant differences between genotypes for clinical efficacy endpoints. Enzalutamide significantly improves radiographic progression-free survival and overall survival vs. placebo irrespective of HSD3B1 status. Men with the AP genotype have higher post-progression mortality and treatment-emergent adverse events, including hypertension, cardiovascular events, and gynecomastia, but a lower fracture rate. Overall, enzalutamide is beneficial in men with mHSPC independent of the HSD3B1 genotype. Inherited polymorphisms of HSD3B1 may account for differential toxicities.

Advancements in ceramic-on-ceramic bearing materials for total hip arthroplasty: Properties, challenges, and future directions

Total hip arthroplasty (THA) is a vital procedure for addressing hip injuries and end-stage arthritis, offering relief to millions annually. However, long-term issues like femoral headwear and osteolysis persist, with 25-year survival rates of around 77.6%. Material selection significantly influences THA outcomes. This article investigated five typical ceramic-on-ceramic (CoC) bearing materials, including alumina, zirconia, zirconia-toughened alumina (ZTA), delta ceramic, and sapphire. Alumina, known for hardness and wear resistance, improved with lower fracture rates, and some squeaking and zirconia ceramics addressed fractures but require impurity reduction. ZTA combines alumina and zirconia, excelling in mechanical properties but also exhibiting squeaking. Optimized with nanostructures, delta ceramic shows fracture resistance despite occasional squeaking. Sapphire offers excellent biocompatibility but requires complex manufacturing and more clinical trials. The quest for optimal THA-bearing surfaces is ongoing, demanding rigorous research and collaboration.

Comparison of Peri-Implant Soft Tissue Around Zirconia and Titanium Abutments in the Aesthetic Zone: A Narrative Review.

This narrative review compares the peri-implant soft tissue responses around zirconia and titanium abutments in the aesthetic zone, emphasizing their mechanical, biological, and aesthetic properties. Titanium abutments, known for their excellent mechanical strength and fatigue resistance, have traditionally been the standard in dental restorations but face challenges in aesthetic integration due to their metallic appearance and potential for higher inflammatory responses. Zirconia abutments, emerging as a promising alternative, offer superior aesthetic outcomes, reduced plaque accumulation, and lower inflammatory responses, making them ideal for use in visible areas with thin soft tissue biotypes. However, zirconia's mechanical properties, such as lower fracture resistance, necessitate careful clinical application. The review also highlights rare instances of titanium allergies, underscoring the importance of individualized treatment planning and regular monitoring to ensure the longevity and success of implant restorations.

Brittle Fracture Behavior of Sn-Ag-Cu Solder Joints with Ni-Less Surface Finish via Laser-Assisted Bonding.

In this study, we investigated the brittle fracture behavior of Sn-3.0Ag-0.5Cu (SAC305) solder joints with a Direct Electroless Gold (DEG) surface finish, formed using laser-assisted bonding (LAB) and mass reflow (MR) techniques. Commercial SAC305 solder balls were used to ensure consistency. LAB increases void fractions and coarsens the primary β-Sn phase with higher laser power, resulting in a larger eutectic network area fraction. In contrast, MR produces solder joints with minimal voids and a thicker intermetallic compound (IMC) layer. LAB-formed joints exhibit higher high-speed shear strength and lower brittle fracture rates compared to MR. The key factor in the reduced brittle fracture in LAB joints is the thinner IMC layer at the joint interface. This study highlights the potential of LAB in enhancing the mechanical reliability of solder joints in advanced electronic packaging applications.

Fracture Lines and Patterns in Intra-articular Distal Femur Fractures.

Distal femur fractures are complex injuries that often present with multiple fragments, posing notable challenges to fixation. This study aimed to (1) use preoperative CT scans to graphically display fracture lines in intra-articular distal femur fractures and (2) identify common fracture patterns in these injuries. All skeletally mature patients that underwent surgical fixation of Orthopaedic Trauma Association type 33C distal femur fractures between 2012 and 2022 were identified across two level 1 trauma centers (n = 63). Preoperative axial, sagittal, and coronal computed tomography scans were obtained. Fracture lines in each plane were traced out and superimposed on standardized distal femur cross-sections, generating a fracture map for each plane. Injury and fracture characteristics were summarized and compared between fracture patterns. On axial scans, 59 of 63 fractures contained a central intercondylar split from the intercondylar notch to the trochlea. On coronal scans, fracture lines originated at the notch and exited laterally and medially in the supracondylar region, creating a Y-shape. One-third of all fractures contained coronal fracture lines, with most involving the lateral condyle. Based on fracture line orientation and location, fractures were divided into four main fracture pattern types. Type 4 fractures (central split and medial coronal fracture line) were associated with lower average medial fracture height and a lower rate of medial metaphyseal comminution. We found that C-type distal femur fractures can present with four main fracture patterns. Most fractures contain a central sagittal intercondylar split, and a high proportion of fractures contain either medial or lateral coronal fracture lines. Fracture pattern was associated with mechanism of injury, presence of medial comminution, and medial fracture line height. Future studies should focus on clinical outcomes and surgical management of these distinct fracture patterns. IV.

Developing a consensus-based motivational care pathway for individuals with lower limb fractures: a Delphi protocol.

Older adults with lower limb fractures often harbor concerns about losing their mobility, fearing a loss of independence. It is vital to develop strategies that foster their active engagement in the rehabilitation process. The present protocol aims to create a care pathway tailored to motivate individuals with lower limb fractures to adhere to rehabilitation. We will develop an observational, cross-sectional, and descriptive study using the Delphi data-gathering approach. Purposive sampling will recruit a panel of healthcare professionals and experts who care for patients with lower limb fractures. Aligned with the Delphi method, a series of iterative rounds will be developed to gather consensus around the motivational strategies used by health professionals in the rehabilitation of people with lower limb fractures. We will employ the Qualtrics platform for data collection and analysis, and a consensus target of 75% has been predetermined. For quantitative data analysis, we will use descriptive statistics encompassing a range of measures, including count, mean, standard deviation, median, minimum, maximum, and range. An inductive thematic analysis procedure will be employed to extract meaningful themes and patterns from qualitative data. The study results are expected to significantly impact clinical practice by creating a specialized care pathway to motivate individuals with lower limb fractures to adhere to rehabilitation. Adopting these explicit standards by professionals will ensure uniform and high-quality care.

Treatment strategy for compartment syndrome at multiple regions due to injuries caused by a tree fall: a case report

BackgroundCompartment syndrome commonly occurs in patients with forearm and lower leg fractures. Compartment syndromes of the gluteal and thigh muscles are less common. It is imperative that compartment syndrome be diagnosed and treated with fasciotomy as soon as possible. However, there are few reports on the diagnosis and treatment strategies for compartment syndromes that occur simultaneously in multiple anatomical regions or in the ipsilateral gluteal region and thigh.Case presentationWe report on a 76-year-old man who was obliquely crushed under a tree extending from the right forearm to the left groin. He was brought to our emergency room, where he was diagnosed with compartment syndrome of the right forearm and left lower leg and crush syndrome. Emergency fasciotomy was performed. On the day after admission, swelling and tightness of the left gluteal thigh became apparent, and intracompartmental pressures were elevated, which led to an additional diagnosis of these compartment syndromes. A fasciotomy was performed, the gluteal skin incision was made according to the Kocher–Langenbeck approach (one of the posterior approaches for hip fractures), and the thigh was approached by extending the incision laterally. This surgical approach enabled the decompression of the compartments through a single incision and allowed for easier wound treatment and closure.ConclusionThis case highlights the diagnosis and treatment of compartment syndrome in four anatomical regions. Extension of the Kocher–Langenbeck approach to the lateral thigh can be a useful surgical approach for ipsilateral gluteal and thigh compartment syndrome.

Investigation on fracture resistance behaviour of dissimilar metal weld joint of modified 9Cr–1Mo steel and AISI 316LN SS

Fracture behavior of dissimilar metal weld joint consisting of mod. 9Cr–1Mo steel, AISI 316LN stainless steel, Inconel 82 butter layer and Inconel 182 weld has been investigated through experiments and FE simulations. The metallographic studies on weld joint and its interfaces have been carried out to determine the influence of microstructure on tensile and fracture properties. Tensile properties of different weld regions viz., weld metal, butter layer and HAZ have been evaluated using sub-size specimens. Fracture resistance behavior of weld joint has been studied through testing of compact type specimens with initial cracks machined at different locations. The plastic η factors for estimation of J-R curve have been obtained using FE analysis for crack in different regions viz., weld metal, butter layer and HAZ. Crack in weld metal exhibits lower fracture resistance as compared to butter layer and HAZ. Further, the constraint acting on crack and its susceptibility for deviation have been discussed in terms of stress triaxiality ahead of crack tip.

A Single Large Center Experience of Medically Treating Impending Compartment Syndrome of Tibia with Deflazacort

Abstract Background: Acute compartment syndrome (ACS) is a rare condition characterized by increased pressure in the closed compartments of the limbs resulting in ischemic tissue necrosis. Most of the patients present following limb fractures. Apart from surgical options such as fasciotomy, which has inherent complication of myonecrosis and severe infection, conservative management with corticosteroids hasshown to be useful. We conducted this study to understand the changes in intra-compartment pressures in ACS after regular monitoring following corticosteroids treatment. Materials and Methods: Consecutive patients of ACS following closed fractures lower limb fractures of tibia or fibula from June 2021 to February 2022 were included. The intra-compartment pressure was measured using a manometer at the time of presentation and after 3, 6, 12, 24, 48, 72, and 96 h of treatment with tab Deflazacort 6 mg × 1 Tablet × Tds. The efficacy of treatment was assessed on the basis of changes in intra-compartmental pressure and improvement in the clinical signs and symptoms of ACS. Results: The study included 60 patients, most (63.3%) suffering from fracture of proximal tibia or fibula (36.7%), presenting with ACS. The mean age was 32.4 ± 8.6 years and most (53%) were males. We observed a statistically significant change (P &lt; 0.05) in the intra-compartment pressures from the baseline to 3 h, 24 h, 48 h, 72 h, and 96 h after corticosteroid treatment. None of these patients suffered from ischemic necrosis or any other complication of ACS. Conclusion: Our results suggest that the timely diagnosis of ACS in patients with lower limb fractures and early initiation of conservative management with corticosteroids can be a mainstay of treatment in these patients. This conservative approach can avoid surgical intervention and reduce the cost of management.

The influence of tibial length on radiographic posterior tibial slope measurement: How much tibia do we need?

PurposeThe purpose of this study was to determine whether significant differences exist when comparing posterior tibial slope (PTS) measured using increasing lengths of the tibia to determine the anatomical axis. MethodsPatients with full-length weight-bearing tibial radiographs were retrospectively identified from 2014 to 2022 at a single institution. Patients were excluded if there was any previous history of lower extremity fracture or osteotomy. The anatomical axis of the tibia was determined using the full length of tibial radiographs, and the “reference PTS” was measured using this axis. Using the same radiograph, the PTS was measured using four different anatomical axes at standardized tibial lengths. While the center of the proximal circle remained constant at 5-cm below the tibial plateau, the center of the distal circle was drawn at four points: a) overlapping circles; b) 10-cm distal to the tibial plateau; c) 15-cm distal to the tibial plateau; d) half the length of the tibia, measured from the tibial plateau to the tibial plafond. Bivariate correlation and frequency distribution analysis (measurements >2-degrees from reference PTS) were performed between the reference PTS and PTS measured at each of the four other lengths. ResultsA total of 154 patients (39.8 ± 17.4 years old, 44.2% male) were included in the final analysis. Measurements at each of the four tibial lengths were all significantly different from the reference PTS (p < 0.001). The correlation strength improved with increasing tibial length (overlapping: R = 0.681, 10-cm: R = 0.821, 15-cm: R = 0.937, and half-tibia: R = 0.963). The number of PTS measurements >2-degree absolute difference from the reference PTS decreased with increasing tibial length (overlapping: 40.3%, 10-cm: 24.0%, 15-cm: 26.0%, and half-tibia: 18.8%). ConclusionAssessment of PTS is dependent on the length of the tibia utilized to obtain the anatomical axis. Accuracy and precision of PTS measurements improved with increasing length of tibia used to determine the anatomical axis. Study designCase series.

Modeling fracture in multilayered teeth using the finite volume-based phase field method

The present work, utilizing the finite volume-based phase field method (FV-based PFM), aims to investigate the initiation and propagation of cracks in the second molar of the left mandible under occlusal loading. By reconstructing cone beam computed tomography scans of the patient, the true morphology and internal mesostructure of the entire tooth are implemented into numerical simulations, including both 2D slice models and a realistic 3D model. Weibull functions are introduced to represent the tooth's heterogeneity, enabling the stochastic distribution characteristics of mechanical parameters. The results indicate that stronger heterogeneity leads to greater crack tortuosity, uneven damage distribution, and lower fracture stress. Additionally, different cusp angles (50° and 70°) and pre-existing fissure morphologies (i.e., U-shape, V-shape, IK-shape, I-shape, and IY-shape) also significantly affect the mechanical performance of the tooth. The study reveals that different cusp angles affect the location of crack initiation. Overall, this work demonstrates the utility of the FV-based PFM framework in capturing the complex fracture behavior of teeth, which can contribute to improved clinical treatment and prevention of tooth fractures. The insights gained from this study can inform the design of dental crown restorations and the optimization of cusp inclination and contact during clinical occlusal adjustments.

Birth weight and birth length affect future fracture risk differently in men and women

SummaryWe wanted to determine if there are any associations between birth factors and adult fracture risk. For women only, shorter birth length was associated with lower relative fracture risk. For women and men, individuals who were long at birth as well as tall in adulthood had a substantially higher relative fracture risk.PurposeWe aimed to examine associations between birth anthropometry and adult fracture risk and to investigate if developmental mismatch is associated with fracture risk.MethodsWe included 4635 participants (476 women and 4159 men; born 1921–1950) with hospital and national registry-based data on birth anthropometry and adult fractures (≥ 50 years). We tested associations by Cox proportional hazards regressions and present hazard ratios (HR) with 95% confidence intervals.ResultsIn total, 1215 (26%) suffered ≥ 1 fracture during a mean observation period of 26 years. In women, unadjusted analyses indicated that both higher birth weight (HR 1.42 per kg (1.10–1.84)) and birth length (1.10 per cm (1.05–1.17)) were associated to higher adult fracture risk. After adjustment (year of birth and gestational age), statistical significance remained only for birth length, HR 1.10 per cm (1.04–1.17). For men, no associations were apparent. We found no associations between developmental mismatch (lower birth weight followed by higher adult weight) and adult fracture risk. However, for both sexes, being born tall and staying tall into adulthood was associated with a markedly higher (55–105%) relative fracture risk (HR women 2.09 (1.18–3.68), men 1.55 (1.19–2.03)) compared to being born short and remaining short in adulthood.ConclusionIn this study, being born shorter and lighter was associated with a lower risk for fractures ≥ 50 years in women. However, analyses indicated that tall adults who were also long at birth may be at markedly higher risk of fractures; this warrants further examinations.

Emergency Management Patient with Multiple Mid-Lower Face Fracture and Tissue Avulsion of 1/3 Mid Face : A Case Report

Introduction : Facial trauma can be defined as bone and or soft tissue damage in the face region. Severe facial trauma might cause life threatening and permanent damage such as vision loss, unable to speak, swallows and chews because there are many bones, blood vessels, nerves, muscles and sensory organs at the face region. The facial damage could be a facial bone fracture with severe avulsion of facial tissue so two-dimensional and three-dimensional measurement of the wound is taken to assess the size of tissue to be covered. The aim of this case report was to give an explanation regarding the emergency management patient with multiple mid-lower face fracture and tissue avulsion of 1/3 mid face. Case Report : A 46 years old male traffic accident patient came to Emergency Department Hasan Sadikin General Hospital with facial fracture and had a severe avulsion of facial tissue. He also had an active bleeding from his face and based on immediate examination the airway was not clear. The patient has been diagnosed with Le Fort I, right orbital rim inferior aspect, nasal, right zygoma and parasymphisis of mandible bone fracture and Tissue loss at upper lip, nasolabial, left nose, left buccal and Multiple lacerated wound at facial region. He was treated with tracheostomy to clear the airway continued with open reduction internal fixation at right orbital rim inferior aspect, nasal, right zygoma, bilateral maxilla bone and parasymphisis of mandible bone with wound closing using rotational and sliding loco regional flap technique. Conclusion : Emergency treatment on multiple facial fracture with severe avulsion of facial tissue must be done to prevent life threatening condition, permanent damage and also to support the secondary reconstruction. Keywords : Severe avulsion of facial tissue, Mid lower face fracture, Open reduction internal fixation, Rotational flap, Sliding loco regional flap

Treatment of lower cervical spine fracture with ankylosing spondylitis by simple long anterior cervical plate: a retrospective study of 17 cases.

Ankylosing spondylitis (AS), an autoimmune disease, often leads to lower cervical spine fractures, with the potential for severe spinal nerve damage even from low-energy injuries. The optimal treatment approach remains debated. A retrospective study involved 17 AS patients with lower cervical spine fractures who received anterior cervical fixation. Most presented cervicothoracic or thoracolumbar kyphosis, with 11 exhibiting neurological deficits. Patient characteristics, clinical data, visual analog scale (VAS), complications, and nerve recovery were analyzed. No postoperative neurological deterioration occurred. All cases experienced complete fusion of fractures during the follow-up period. Preoperative VAS significantly decreased at 3 days and 3 months post-surgery. Of the 11 patients with preoperative neurological deficits, approximately 54.5% showed improvement post-surgery. No complications were reported, such as esophageal fistula, wound infection, or fixation failure. Anterior internal fixation is a possible treatment for AS-related lower cervical fractures. This approach ensures satisfactory spinal stability and neurological recovery with proper cranial traction and external fixation post-surgery. Our findings demonstrate that this surgical method is safe and effective.

Minimal Clinically Important Difference (MCID) for the Short Musculoskeletal Function Assessment (SMFA) in Severe Lower Extremity Trauma: Pooled Data from 7 Multicenter, Prospective Clinical Trials.

The Short Musculoskeletal Function Assessment (SMFA) is a well validated, widely used patient-reported outcome (PRO) measure for orthopaedic patients. Despite its widespread use and acceptance, this measure does not have an agreed upon minimal clinically important difference (MCID). The purpose of the present study was to create distributional MCIDs with use of a large cohort of research participants with severe lower extremity fractures. Three distributional approaches were used to calculate MCIDs for the Dysfunction and Bother Indices of the SMFA as well as all its domains: (1) half of the standard deviation (one-half SD), (2) twice the standard error of measurement (2SEM), and (3) minimal detectable change (MDC). In addition to evaluating by patient characteristics and the timing of assessment, we reviewed these calculations across several injury groups likely to affect functional outcomes. A total of 4,298 SMFA assessments were collected from 3,185 patients who had undergone surgical treatment of traumatic injuries of the lower extremity at 60 Level-I trauma centers across 7 multicenter, prospective clinical studies. Depending on the statistical approach used, the MCID associated with the overall sample ranged from 7.7 to 10.7 for the SMFA Dysfunction Index and from 11.0 to 16.8 for the SMFA Bother Index. For the Dysfunction Index, the variability across the scores was small (<5%) within the sex and age subgroups but was modest (12% to 18%) across subgroups related to assessment timing. A defensible MCID can be found between 7 and 11 points for the Dysfunction Index and between 11 and 17 points for the Bother Index. The precise choice of MCID may depend on the preferred statistical approach and the population under study. While differences exist between MCID values based on the calculation method, values were consistent across the categories of the various subgroups presented. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Management of Open Fractures of the Extremities and Pediatrics.

The modern management of open fractures was established after the foundational work of Gustilo and Anderson, but we continue to strive to determine the optimal treatment of open fractures to diminish the risk of infection. The ideal timing of antibiotics, presentation to the operating room, and timing of procedures such as flap coverage continue to be investigated with incremental changes recommended over the years. This article aims to provide the most recent review of the literature regarding the timing and management of both upper and lower extremity open fractures, pediatric open fractures, current topics of controversy, and the data supporting current treatment recommendations.