Low Force Research Articles

Carcass and Meat Characteristics of Cull Heifers from Different Genetic Groups Fed Diets with Different Sources of Nonprotein Nitrogen in Confinement.

The aim of this study was to evaluate the effect of genetic groups and diets with different sources of nonprotein nitrogen (NPN) on the carcass and meat characteristics of beef heifers. The meat from 40 heifers (20 ½ Angus ½ Nellore (A × N) and 20 ½ Charolais ½ Nellore (L × N)), finished in feedlots, was used. The heifers were fed diets containing different sources of NPN-(1) a diet with livestock urea and protected urea (LPU) and (2) a diet with extruded urea (EU)-in a completely randomized design with a 2 × 2 factorial arrangement. Carcass, composition and meat quality evaluations were carried out. There were no significant interactions between diet and genetic group for most of the variables evaluated (p > 0.05). The A × N heifers had higher hot carcass weights (305.73 vs. 279.80 kg), loin eye areas (80.87 vs. 75.45 cm2), subcutaneous fat thicknesses (8.69 vs. 6.35 mm) and lower shear forces (6.98 vs. 7.7 kg) compared to the C × N heifers (p < 0.05). The meat from the A × N heifers had higher proportions of saturated fatty acids (49.41 vs. 47.95%), with no effects on the proportions of monounsaturated (47.57%) and polyunsaturated (4.01%) fatty acids. The A × N heifers had better carcass and meat characteristics, while the C × N heifers had meat and fat with better fatty acid profiles.

Labor market outcomes during opposite resource shocks: the 2009 and 2012 earthquakes in Italy

The 2009 and 2012 earthquakes in Italy occurred in a close-knit region and time horizon but differed substantially on both the initial shock to the stock and the subsequent flow of resources. This paper considers the short run impact on the dynamic response of labor market outcomes. Both earthquakes lowered employment and labor force participation by more than 0.5%. With its negative effect on the resources available, the 2009 shock led to a drop in real wages of 1.3% and a sharp—but short-lived—widening of the wage gap generated by the skill premium. The 2012 earthquake, which led firms to upgrade their technology, increased wages by 2.2% and led to a more balanced—but persistent—widening of the wage gap. The predictions of a model developed in this paper are consistent with these results.

Labor Market Effects of Credit Constraints: Evidence from a Natural Experiment

We exploit the 1997 and 2003 constitutional amendments in Texas—allowing home equity loans and lines of credit for nonhousing purposes—as natural experiments to estimate the effect of easier credit access on the labor market. Using state-level as well as micro data, we find that easier access to housing credit led to a notably lower labor force participation rate between 1997 and 2007. Our findings are remarkably robust to improved synthetic control methods based on insights from machine learning. Our research shows that negative labor market effects of easier credit access are important for assessing its stimulative impact on overall growth. (JEL C45, G21, G51, J16, J22)

Is headless screw a valid alternative for the fixation of Chevron olecranon osteotomy? A biomechanical comparison of 4 fixation methods

BackgroundChevron osteotomy is a popular technique for repairing complex distal humerus intraarticular fractures. However, re-fixation presents challenges like hardware prominence and soft tissue damage. Headless cannulated screws are gaining popularity for fixation due to better bone purchase and less irritation. This study aims to compare different fixation strategies with headless screws for chevron osteotomy fixation. MethodsThis study utilized 32 polyurethane foam ulna specimens for biomechanical testing. The Chevron osteotomy was performed with an oscillating saw for all specimens. Four different techniques were used for re-fixation: modified tension band wire fixation, plate-screw fixation, cannulated screw fixation, and headless cannulated screw fixation. The constructs were mounted to the testing machine, simulating the elbow in 90 degrees of flexion. All specimens were tested under axial traction. Displacements at 350N and 500N and loads at the failure were recorded. ResultsAt the load of the implant failure, headless cannulated screw fixation revealed higher force values when compared to the other constructs, and modified tension band wire fixation showed lower force values compared to the other three groups (p < 0.001). The headless cannulated screw fixation group showed no significant differences in osteotomy displacements when tested to a 350N load. There were no significant differences in displacements at a 500N load between the four groups (p = 0.275). ConclusionThis study suggests that headless cannulated screw fixation is a viable and effective option for Chevron osteotomies. Headless cannulated screw fixation makes it a promising alternative to traditional fixation methods. This technique may be a more reliable fixation technique during daily activities and moderate elbow motions, indicating that it has the potential to succeed.

Effect of automated versus conventional ventilation on mechanical power of ventilation-A randomized crossover clinical trial.

Mechanical power of ventilation, a summary parameter reflecting the energy transferred from the ventilator to the respiratory system, has associations with outcomes. INTELLiVENT-Adaptive Support Ventilation is an automated ventilation mode that changes ventilator settings according to algorithms that target a low work-and force of breathing. The study aims to compare mechanical power between automated ventilation by means of INTELLiVENT-Adaptive Support Ventilation and conventional ventilation in critically ill patients. International, multicenter, randomized crossover clinical trial in patients that were expected to need invasive ventilation > 24 hours. Patients were randomly assigned to start with a 3-hour period of automated ventilation or conventional ventilation after which the alternate ventilation mode was selected. The primary outcome was mechanical power in passive and active patients; secondary outcomes included key ventilator settings and ventilatory parameters that affect mechanical power. A total of 96 patients were randomized. Median mechanical power was not different between automated and conventional ventilation (15.8 [11.5-21.0] versus 16.1 [10.9-22.6] J/min; mean difference -0.44 (95%-CI -1.17 to 0.29) J/min; P = 0.24). Subgroup analyses showed that mechanical power was lower with automated ventilation in passive patients, 16.9 [12.5-22.1] versus 19.0 [14.1-25.0] J/min; mean difference -1.76 (95%-CI -2.47 to -10.34J/min; P < 0.01), and not in active patients (14.6 [11.0-20.3] vs 14.1 [10.1-21.3] J/min; mean difference 0.81 (95%-CI -2.13 to 0.49) J/min; P = 0.23). In this cohort of unselected critically ill invasively ventilated patients, automated ventilation by means of INTELLiVENT-Adaptive Support Ventilation did not reduce mechanical power. A reduction in mechanical power was only seen in passive patients. Clinicaltrials.gov (study identifier NCT04827927), April 1, 2021. https://clinicaltrials.gov/study/NCT04827927?term=intellipower&rank=1.

A Comparison of Oral Function in Older In- and Outpatients: An Observational Study.

(1) Background: Insufficient data exist regarding oral function among older adults in Europe. Therefore, we aimed to assess and compare oral function between older in- and outpatients and identify predictors of low masticatory performance. (2) Methods: Patients were consecutively recruited from the outpatient center (n = 31) and the inpatient geriatric department (n = 31) at a tertiary University Hospital in Switzerland in 2023. Assessments on oral function included the total number of intraoral eruptive teeth, number of supporting zones with dentures, maximal bite force (Dental Prescale II, Fuji Film Corp., Tokyo, Japan), and masticatory performance (Hue-Check Gum©, University of Bern, Bern, Switzerland) using a visual (SA1-SA5) and a digital (SD_Hue) scale. The visual and digital assessment of masticatory performance showed a strong correlation (Kendall tau = 0.83). Low masticatory performance was defined as SA-Grade 1-2 (vs. SA3-SA5 as reference). In a multivariate model adjusting for age, sex, and clinical setting, we investigated associations of maximal bite force, few eruptive teeth, and few supporting zones with low masticatory performance. (3) Results: Mean age was 81.9 (standard deviation (sd) 5.2) years, and 62.9% were female. Overall, maximal bite force was 247 N (sd 261). A total of 39 patients (63.9%) had a low masticatory performance, 62.9% a low maximal bite force, and 50% a low number of eruptive teeth (<10). Masticatory performance, number of eruptive teeth, and maximal bite force did not significantly differ between in- and outpatients. The number of supporting zones was significantly higher in outpatients compared to inpatients (median 4, interquartile range (IQR) 4-4; vs. 4, IQR 2-4; p = 0.03). In the multivariate model, maximal bite force and a low number of eruptive teeth were independently associated with low masticatory performance (adjusted odds ratio 7.4 (95% CI, 1.8-30.4; p < 0.01), and OR 7.8 (95% CI, 1.7-36.4; p < 0.01), respectively). (4) Conclusions: Impaired oral function is highly prevalent in both European older in- and outpatients to a similar degree. The association of low masticatory performance with maximal bite force and with a low number of eruptive teeth may indicate that a basic screening should include either of these parameters to identify impaired oral function.

A Stereolithography-Based Modified Spin-Casting Method for Faster Laboratory-Scale Production of Dexamethasone-Containing Dissolving Microneedle Arrays.

Microneedle arrays (MNAs) consist of a few dozens of submillimeter needles, which tend to penetrate through the stratum corneum layer of the skin and deliver hardly penetrating drugs to the systemic circulation. The application of this smart dosage form shows several advantages, such as simple use and negligible pain caused by needle punctures compared to conventional subcutaneous injections. Dissolving MNAs (DMNAs) represent a promising form of cutaneous drug delivery due to their high drug content, biocompatibility, and ease of use. Although different technologies are suitable to produce microneedle arrays (e.g., micromilling, chemical etching, laser ablation etc.), many of these are expensive or hardly accessible. Following the exponential growth of the 3D-printing industry in the last decade, high-resolution desktop printers became accessible for researchers to easily and cost-effectively design and produce microstructures, including MNAs. In this work, a low force stereolithography (LFS) 3D-printer was used to develop the dimensionally correct MNA masters for the spin-casting method. The present study aimed to develop and characterize drug-loaded DMNAs using a two-level, full factorial design for three factors focusing on the optimization of DMNA production and adequate drug content. For the preparation of DMNAs, carboxymethylcellulose and trehalose were used in certain amounts as matrices for dexamethasone sodium phosphate (DEX). Investigation of the produced DexDMNAs included mechanical analysis via texture analyzer and optical microscopy, determination of drug content and distribution with HPLC and Raman microscopy, dissolution studies via HPLC, and ex vivo qualitative permeation studies by Raman mapping. It can be concluded that a DEX-containing, mechanically stable, biodegradable DexDMNA system was successfully developed in two dosage strengths, of which both efficiently delivered the drug to the lower layers (dermis) of human skin. Moreover, the ex vivo skin penetration results support that the application of DMNAs for cutaneous drug delivery can be more effective than that of a conventional dermal gel.

Investigation of the tradeoffs between tracking performance and energetics in heterogeneous variable recruitment fluidic artificial muscle bundles

In traditional hydraulic robotics, actuators must be sized for the highest possible load, resulting in significant energy losses when operating in lower force regimes. Variable recruitment fluidic artificial muscle (FAM) bundles offer a novel bio-inspired solution to this problem. Divided into individual MUs, each with its own control valve, a variable recruitment FAM bundle uses a switching control scheme to selectively bring MUs online according to load demand. To date, every dynamic variable recruitment study in the literature has considered homogeneous bundles containing MUs of equal size. However, natural mammalian muscle MUs are heterogeneous and primarily operate based on Henneman's size principle, which states that MUs are recruited from smallest to largest for a given task. Is it better for a FAM variable recruitment bundle to operate according to this principle, or are there other recruitment orders that result in better performance? What are the appropriate criteria for switching between recruitment states for these different recruitment orders? This paper seeks to answer these questions by performing two case studies exploring different bundle MU size distributions, analyzing the tradeoffs between tracking performance and energetics, and determining how these tradeoffs are affected by different MU recruitment order and recruitment state transition thresholds. The only difference between the two test cases is the overall force capacity (i.e. total size) of the bundle. For each test case, a Pareto frontier for different MU size distributions, recruitment orders, and recruitment state transition thresholds is constructed. The results show that there is a complex relationship between overall bundle size, MU size distributions, recruitment orders, and recruitment state transition thresholds corresponding to the best tradeoffs change along the Pareto frontier. Overall, these two case studies validate the use of Henneman's Size Principle as a variable recruitment strategy, but also demonstrate that it should not be the only variable recruitment method considered. They also motivate the need for a more complex variable recruitment scheme that dynamically changes the recruitment state transition threshold and recruitment order based on loading conditions and known system states, along with a co-design problem that optimizes total bundle size and MU size distribution.

Development and Investigation of a Grasping Analysis System with Two-Axis Force Sensors at Each of the 16 Points on the Object Surface for a Hardware-Based FinRay-Type Soft Gripper.

The FinRay soft gripper achieves passive enveloping grasping through its functional flexible structure, adapting to the contact configuration of the object to be grasped. However, variations in beam position and thickness lead to different behaviors, making it important to research the relationship between structure and force. Conventional research using FEM simulations has tested various virtual FinRay models but replicating phenomena such as buckling and slipping has been challenging. While hardware-based methods that involve installing sensors on the gripper and the object to analyze their states have been attempted, no studies have focused on the tangential contact force related to slipping. Therefore, we developed a 16-way object contact force measurement device incorporating two-axis force sensors into each of the 16 segmented objects and compared the normal and tangential components of the enveloping grasping force of the FinRay soft gripper under two types of contact friction conditions. In the first experiment, the proposed device was compared with a device containing a six-axis force sensor in one segmented object, confirming that the proposed device has no issues with measurement performance. In the second experiment, comparisons of the proposed device were made under various conditions: two contact friction states, three object contact positions, and two object motion states. The results demonstrated that the proposed device could decompose and analyze the grasping force into its normal and tangential components for each segmented object. Moreover, low friction conditions result in a wide contact area with lower tangential frictional force and a uniform normal pushing force, achieving effective enveloping grasping.

Comparative Analysis of Morphometric, Densitometric, and Mechanical Properties of Skeletal Locomotor Elements in Three Duck Species (Anatidae: Anatinae).

Ducks (Anatinae) play a crucial role in wetland ecosystems, contributing to seed dispersal and nutrient cycling. This study investigates the skeletal adaptations of three duck species: the Mallard (Anas platyrhynchos), Tufted Duck (Aythya fuligula), and Green-Winged Teal (Anas crecca). The focus is on the tibiotarsus and humerus bones to understand how these adaptations support their different locomotion and habitat preferences. Bone samples n = 6 of deceased ducks (both male and female) from each species (for a total of 36 samples) were cleaned and measured for length, weight, and density. Dual-energy X-ray absorptiometry was used to determine bone mineral density (BMD) and bone mineral content (BMC), and mechanical properties like yield force and stiffness were tested using a 3-point bending test. The results show significant differences in body weight, bone weight, and bone length among the species, with Mallards being the largest and Teals the smallest. Male Teals displayed higher relative bone weight (RBW) in their tibia compared to male Mallards, and male Mallards had significantly lower RBW in the humerus compared to the other species. Female Teals had higher RBW than the other species. Teals also exhibited much lower BMD in the tibia, whereas female Mallards had lower BMD in the humerus. The Seedor index revealed that male Mallards had the highest values in the tibia, while female Teals had the lowest. Mechanical testing indicated that Teals had lower yield force and breaking force in the tibia, whereas Mallards showed the highest stiffness in both bones. Tufted Ducks had intermediate values, consistent with their diving behaviour. These findings suggest that the Mallard's robust bones support its adaptability to various environments and diverse locomotion and foraging strategies. The Teal's lighter and less dense bones facilitate rapid flight and agility in shallow wetlands. The Tufted Duck's intermediate bone characteristics reflect its specialization in diving, requiring a balance of strength and flexibility. Understanding these skeletal differences may provide valuable insights into the evolutionary biology and biomechanics of these species, aiding in their conservation and enhancing our knowledge of their roles in wetland ecosystems. By exploring the functional morphology of these ducks, this study aims to shed light on the biomechanical mechanisms that underpin their locomotion and foraging behaviours.

Tailored bond characteristics in additively manufactured resin bond grinding wheels: achieving optimal performance, high abrasive concentration, and cost efficiency

AbstractThis research study addresses the issues with additive manufacturing of high abrasive concentration as well as highly affordable resin-bond grinding wheels. High-concentration resin bond grinding wheels are high-demand cutting tools that provide high-efficiency grinding operation for a broad range of ferrous and nonferrous metals. Adding a high concentration of abrasive grains into the blend while using high-temperature acrylic resins as a bond material has encountered some difficulties during digital light processing (DLP), such as insufficient flow of material resulting from the high inherent viscosity of the pure resin and less printability due to their dark color, which become worse by adding a high volume of abrasive grains. An engineered bond material achieved through the mechanical alloying of acrylate photopolymers with tailored properties has been discovered during this research study, taking advantage of reduced price, excellent grinding performance, and high grain concentration. The experimental grinding operations comprising medium and high material removal rates were carried out to prove the supreme properties of the SiC- and diamond-printed grinding wheels toward having high accuracy besides a high-quality finished surface. Mechanical characterization including tensile test and grinding performance examination comprising tool wear, cutting force, surface quality, and surface integrity were conducted on the printed and ground parts. The results showed that integrating 14.6 Wt% of Resin A (with higher thermal resistance and viscosity) into the wheel’s composition could contribute to the fabrication of a high-performance grinding wheel, besides having a reliable, fast, and feasible printing process. Furthermore, On-machine and out-of-machine measurements on the ground surface signified that the composition with the highest Resin B concentration (GW-H) offered up to 2 times higher mechanical properties, 33–50% lower grinding forces, 25–50% improved surface qualities, 2–3 times extended tool life span, and less interval dressing operation compared to the grinding wheel containing the lowest Resin B concentration (GW-L).

Smartphone videos-driven musculoskeletal multibody dynamics modelling workflow to estimate the lower limb joint contact forces and ground reaction forces.

The estimation of joint contact forces in musculoskeletal multibody dynamics models typically requires the use of expensive and time-consuming technologies, such as reflective marker-based motion capture (Mocap) system. In this study, we aim to propose a more accessible and cost-effective solution that utilizes the dual smartphone videos (SPV)-driven musculoskeletal multibody dynamics modeling workflow to estimate the lower limb mechanics. Twelve participants were recruited to collect marker trajectory data, force plate data, and motion videos during walking and running. The smartphone videos were initially analyzed using the OpenCap platform to identify key joint points and anatomical markers. The markers were used as inputs for the musculoskeletal multibody dynamics model to calculate the lower limb joint kinematics, joint contact forces, and ground reaction forces, which were then evaluated by the Mocap-based workflow. The root mean square error (RMSE), mean absolute deviation (MAD), and Pearson correlation coefficient (ρ) were adopted to evaluate the results. Excellent or strong Pearson correlations were observed in most lower limb joint angles (ρ = 0.74 ~ 0.94). The averaged MADs and RMSEs for the joint angles were 1.93 ~ 6.56° and 2.14 ~ 7.08°, respectively. Excellent or strong Pearson correlations were observed in most lower limb joint contact forces and ground reaction forces (ρ = 0.78 ~ 0.92). The averaged MADs and RMSEs for the joint lower limb joint contact forces were 0.18 ~ 1.07 bodyweight (BW) and 0.28 ~ 1.32 BW, respectively. Overall, the proposed smartphone video-driven musculoskeletal multibody dynamics simulation workflow demonstrated reliable accuracy in predicting lower limb mechanics and ground reaction forces, which has the potential to expedite gait dynamics analysis in a clinical setting.

Development and Characterization of Hybrid Burgers Made from Pork and Multi-Ingredient Plant Mixtures and Protected with Lactic Acid Bacteria

Hybrid (meat–plant) products can be a sustainable response to the increased interest in flexitarianism. Their development requires designing appropriate composition and functional properties and ensuring microbiological safety. This study aimed to determine the influence of using various multi-ingredient plant mixtures and pork in different proportions and two recipe variants on the characteristics of baked burgers. Additionally, the impact of lactic acid bacteria (LAB) application on the microbiological quality of raw hybrid/plant burgers was assessed. All products were analyzed in terms of basic chemical composition (NIR spectroscopy) and physicochemical and textural properties (instrumental methods). The raw plant and hybrid burgers met the microbiological requirements. The baked burgers did not significantly differ in terms of their chemical composition, except for the fiber found in plant/hybrid samples. Moreover, the reformulation of burgers had no effect on their cooking yield or water activity. As the content of plant parts increased, the baked burgers were darker (lower L*) and had a more tender texture (lower shear force and penetration force). Overall, the multi-ingredient plant mixtures showed great potential in the development of high-quality hybrid burgers. However, the texture formed can, importantly, determine final consumer acceptance. Therefore, research should be continued, especially in terms of comprehensive textural and sensory analyses.

Texture perception at the foot sole: comparison between walking, sitting, and to the hand.

We frequently interact with textured surfaces with both our feet and hands. Like texture's importance for grasping, texture perception via the foot sole might provide important signals about the stability of a surface, aiding in maintaining balance. However, how textures are perceived by the foot, and especially under the high forces experienced during walking, is unknown. The current study builds on extensive research investigating texture perception at the hand by presenting everyday textures to the foot while stepping onto them, exploring them with the foot while sitting, and exploring them with the hand. Participants rated each texture along three perceptual dimensions: roughness, hardness, and stickiness. Participants also rated how stable their posture felt when standing upon each texture. Results show that perceptual ratings of each textural dimension were highly correlated across conditions. Hardness exhibited the greatest consistency and stickiness the weakest. Moreover, correlations between stepping and exploration with the foot were lower than those between exploration with the foot and exploration with the hand, suggesting that mode of interaction (high vs. low force) impacts perception more than body region used (foot vs. hand). On an individual level, correlations between conditions were higher than those between participants, suggesting that differences are greater between individuals than between mode of interaction or body region. When investigating the relationship to perceived stability, only hardness contributed significantly, with harder surfaces rated as more stable. Overall, tactile perception appears consistent across body regions and interaction modes, although differences in perception are greater during walking.NEW & NOTEWORTHY We frequently interact with textured surfaces using our feet, but little is known about how textures on the foot sole are perceived as compared with the hand. Here, we show that roughness, hardness, and stickiness ratings are broadly consistent when stepping on textures, exploring them with the foot sole, or with the hand. Hardness also contributes to perceived stability.

Current experimental upper bounds on spacetime diffusion

A theory describing the dynamics of quantum systems interacting on a classical spacetime was recently put forward by Oppenheim Quantum states may retain their coherence, at the cost of some amount of stochasticity of the spacetime metric, characterized by a spacetime diffusion parameter. Here, we report existing experimental upper bounds on such spacetime diffusion, based on a review of several types of experiments with very low force noise over a broad range of test masses from single atoms to several kilograms. We find an upper bound at least 15 orders of magnitude lower as compared to the initial bounds for explicit models presented by Oppenheim . The results presented here provide a path forward for future experiments that can help evaluate classical-quantum theories. Published by the American Physical Society 2024

Safety Window for Effective Lesion Crossing in Patients With Chronic Thromboembolic Pulmonary Hypertension

BackgroundBalloon pulmonary angioplasty for chronic thromboembolic pulmonary hypertension (CTEPH) is limited by a lack of safe and effective tools for crossing these lesions. We aim to identify a safety window for an intraluminal crossing device in this vascular bed by studying the piercing properties of pulmonary arterial vessel walls and intraluminal CTEPH lesion specimens. As a secondary objective, we also describe the histopathologic features of CTEPH lesions. MethodsSpecimens were procured from 9 patients undergoing pulmonary endarterectomy. The specimens were subsampled and identified grossly as arterial wall or intraluminal CTEPH lesions. The force needed for tissue penetration was measured using a 0.38-mm (0.015-in) diameter probe in an ex vivo experimental model developed in our lab. Concurrent histology was also performed. ResultsThe mean force needed to penetrate the arterial wall and intraluminal CTEPH lesions was 1.75 ± 0.10 N (n = 121) and 0.30 ± 0.04 N (n = 56), respectively (P < .001). Histology confirmed the presence of intimal hyperplasia with calcium and hemosiderin deposition in the arterial wall as well as an old, organized thrombus in the lumen. ConclusionsThe pulmonary arterial wall is friable and prone to perforation during instrumentation with workhorse coronary guide wires. However, the results of this study demonstrate that a much lower force is needed for the 0.38-mm (0.015-in) probe to penetrate an intraluminal CTEPH lesion compared to pulmonary arterial intima. This finding suggests the existence of a safety window for lesion-crossing devices, enabling effective balloon pulmonary angioplasty.

Microstructural modification and enhanced mechanical properties in Zr50-Ti50 alloy via low temperature electron wind force annealing

This study investigates the microstructural transformations and associated property enhancements in a Zr50-Ti50 alloy annealed at only 120 °C with low duty cycle current pulses. Microanalysis with electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) show the formation of alpha lath structure, typically observed in much higher thermal annealing temperatures. EBSD and XRD analyses revealed the formation and/or growth of the lath structure, with notable changes in pole distributions and the appearance of a distinct peak at 52.5° in the XRD spectrum. The lath structure is quantified using FiJi weka segmentation machine learning technique. Nanoindentation data showed an increase in the average hardness from ∼7 to ∼8 GPa and a corresponding increment in the reduced modulus from 127 to 148 GPa. The observed increase in low-angle grain boundaries (LAGBs) from 4% to 12% further complements the findings, suggesting a complex interplay of microstructural features contributing to the overall improvement in the mechanical properties. The proposed low temperature annealing technique demonstrates the predominant role of the electron wind force for tailoring the microstructure and mechanical performance of ZrTi alloys, providing insights that could have implications for the broader field of materials engineering.

Fish and tips: Historical and projected changes in commercial fish species' habitat suitability in the Southern Hemisphere

Global warming has significantly altered fish distribution patterns in the ocean, shifting towards higher latitudes and deeper waters. This is particularly relevant in high-latitude marine ecosystems, where climate-driven environmental changes are occurring at higher rates than the global average. Species Distribution Models (SDMs) are increasingly being used for predicting distributional shifts in habitat suitability for marine species as a response to climate change. Here, we used SDMs to project habitat suitability changes for a range of high-latitude, pelagic and benthopelagic commercial fish species and crustaceans (10 species); from 1850 to two future climate change scenarios (SSP1–2.6: low climate forcing; and SSP5–8.5: high climate forcing). The study includes 11 Large Marine Ecosystems (LME) spanning South America, Southern Africa, Australia, and New Zealand. We identified declining and southward-shifting patterns in suitable habitat areas for most species, particularly under the SSP5–8.5 scenario and for some species such as Argentine hake (Merluccius hubbsi) in South America, or snoek (Thyrsites atun) off Southern Africa. Geographical constraints will likely result in species from Southern Africa, Australia, and New Zealand facing the most pronounced habitat losses due to rising sea surface temperatures (SST). In contrast, South American species might encounter greater opportunities for migrating southward. Additionally, the SSP5–8.5 scenario predicts that South America will be more environmentally stable compared to other regions. Overall, our findings suggest that the Patagonian shelf could serve as a climate refuge, due to higher environmental stability highlighting the importance of proactive management strategies in this area for species conservation. This study significantly contributes to fisheries and conservation management, providing valuable insights for future protection efforts in the Southern Hemisphere.

Polymerizable alkyl 2-(tosylmethyl)acrylates: Highly efficient addition-fragmentation chain transfer agents for the development of low shrinkage dental composites

One of the major drawbacks for restorative dentistry is the polymerization shrinkage and the consequential shrinkage stress in methacrylate-based dental composites. An efficient way to reduce shrinkage stress is the incorporation of addition fragmentation chain transfer agents (AFCT agents). In this contribution, five novel polymerizable allyl sulfones were synthesized in four to five steps. A photo-DSC study was carried out in order to evaluate the influence of the addition of each AFCT agent on the polymerization rate of a dimethacrylate-based monomer mixture. The glass transition temperature (Tg) of the resulting networks was measured using DMTA. Dental composites based on these new chain transfer agents (CTAs) were prepared. A combination of camphorquinone, ethyl 4-(dimethylamino)benzoate and bis-(4-t-butylphenyl)-iodonium hexafluorophosphate was selected as photoinitiator system. Low shrinkage force values, suitable ambient light working time and excellent mechanical properties were obtained for all CTA based materials. Composites based on three of the synthesized CTAs even exhibited higher flexural modulus than the corresponding CTA-free material. Furthermore, a significant reduction of unreacted CTA leaching was found if a polymerizable moiety was introduced in the CTA structure. Hence, the incorporation of polymerizable allyl sulfones in dental composites is a promising strategy to obtain low shrinkage materials exhibiting improved biocompatibility.

Single-Molecule Detection of the Encounter and Productive Electron Transfer Complexes of a Photosynthetic Reaction Center.

Small, diffusible redox proteins play an essential role in electron transfer (ET) in respiration and photosynthesis, sustaining life on Earth by shuttling electrons between membrane-bound complexes via finely tuned and reversible interactions. Ensemble kinetic studies show transient ET complexes form in two distinct stages: an "encounter" complex largely mediated by electrostatic interactions, which subsequently, through subtle reorganization of the binding interface, forms a "productive" ET complex stabilized by additional hydrophobic interactions around the redox-active cofactors. Here, using single-molecule force spectroscopy (SMFS) we dissected the transient ET complexes formed between the photosynthetic reaction center-light harvesting complex 1 (RC-LH1) of Rhodobacter sphaeroides and its native electron donor cytochrome c2 (cyt c2). Importantly, SMFS resolves the distribution of interaction forces into low (∼150 pN) and high (∼330 pN) components, with the former more susceptible to salt concentration and to alteration of key charged residues on the RC. Thus, the low force component is suggested to reflect the contribution of electrostatic interactions in forming the initial encounter complex, whereas the high force component reflects the additional stabilization provided by hydrophobic interactions to the productive ET complex. Employing molecular dynamics simulations, we resolve five intermediate states that comprise the encounter, productive ET and leaving complexes, predicting a weak interaction between cyt c2 and the LH1 ring near the RC-L subunit that could lie along the exit path for oxidized cyt c2. The multimodal nature of the interactions of ET complexes captured here may have wider implications for ET in all domains of life.