Low Computational Complexity Research Articles

An Ordered QR Decomposition based Signal Detection Technique for Uplink Massive MIMO System

Signal detection turns out to be a critical challenge in massive MIMO (m-MIMO) system due to the deployment of large number of antennas at the base station. Although, the mini mum mean square error (MMSE) is one of the popular signal detection method, but, it requires matrix inversion with cubic complexity. In order to reduce computational complexity, sev eral suboptimal signal detection methods were proposed such as Gauss-Seidel, successive over relaxation, Jacobi, Richardson methods. Although, these methods provide low complexity but their performance are limited to MMSE method. In this paper, we have proposed two signal detection techniques namely QR decompositions (QRD) and ordered QRD (OQRD). Finally, the performances of proposed signal detection methods are com pared with various conventional methods in terms of symbol er ror rate (SER) and computational complexity. The simulation re sults validate that the proposed methods outperform the MMSE method with substantially lower computational complexity.

An Efficient and Rapid Medical Image Segmentation Network.

Accurate medical image segmentation is an essential part of the medical image analysis process that provides detailed quantitative metrics. In recent years, extensions of classical networks such as UNet have achieved state-of-the-art performance on medical image segmentation tasks. However, the high model complexity of these networks limits their applicability to devices with constrained computational resources. To alleviate this problem, we propose a shallow hierarchical Transformer for medical image segmentation, called SHFormer. By decreasing the number of transformer blocks utilized, the model complexity of SHFormer can be reduced to an acceptable level. To improve the learned attention while keeping the structure lightweight, we propose a spatial-channel connection module. This module separately learns attention in the spatial and channel dimensions of the feature while interconnecting them to produce more focused attention. To keep the decoder lightweight, the MLP-D module is proposed to progressively fuse multi-scale features in which channels are aligned using Multi-Layer Perceptron (MLP) and spatial information is fused by convolutional blocks. We first validated the performance of SHFormer on the ISIC-2018 dataset. Compared to the latest network, SHFormer exhibits comparable performance with 15 times fewer parameters, 30 times lower computational complexity and 5 times higher inference efficiency. To test the generalizability of SHFormer, we introduced the polyp dataset for additional testing. SHFormer achieves comparable segmentation accuracy to the latest network while having lower computational overhead.

The Application of SLAM in Life and Scientific Research

This article mainly focuses on the application of SLAM in technology and provides a literature review on the following aspects: 1) The application of SLAM in automatic parking of automobiles. This includes using AVP-SLAM for high-precision automatic parking in outdoor parking lots using convolutional neural networks, and using MOFISLM for high-precision automatic parking when indoor GPS signals are poor. 2) The application of SLAM in robotics. It includes three aspects. The first is using the GMapping algorithm to construct and locate maps with high accuracy, low computational complexity, and high robustness, enabling robots to plan the shortest path in unknown environments. The second is to use ORB-SLAM2, which can handle more complex situations, to navigate medical institution robots to improve hospital efficiency and reduce disease transmission rates. The third is for robots that perform tasks in complex and unknown terrains. The improved version of LAMP1.0, LAMP2.0, which is suitable for complex underground environments, can achieve multi robot collaborative cooperation with high accuracy and robustness. 3) Application of SLAM in the field of unmanned aerial vehicles. This article mainly elaborates on four aspects. The first is to use visual SLAM to achieve collaborative work between ground robots and drones, and to utilize the high camera advantage of drones to quickly build maps for ground robots, improve accuracy, and save time. The second is to utilize the application of VSLAM on unmanned aerial vehicles to contribute to agriculture. The third is ORB-SLAM3 to provide rapid and high-precision landing on deck for unmanned aerial vehicles in maritime missions. The fourth is using SLAM to assist unmanned aerial vehicles in landing in emergency or position situations (such, when GPS signals are lost).

Throughput maximization scheme of the IRS-aided wireless powered NOMA systems

The computation complexity of the existing resource allocation schemes to maximize sum throughput is very high for intelligent reflecting surface (IRS)-assisted wireless powered non-orthogonal multiple access (NOMA) system. Therefore, a low complexity resource allocation method to maximize sum throughput is considered by joint optimizing phase shifts and time allocation. Firstly, to reduce the variables that need to be optimized, we derive the problem with only phase shifts as variables, and further deduce optimization problem of phase shifts only for downlink wireless energy transmission (WET) process. Then, the problem of phase shifts for WET process is solved directly by transforming multi-variable optimization problem into that with single variable, and the phase shifts for the uplink wireless information transmission process are got as well with given phase shifts for WET process. Finally, with given phase shifts, the optimal time allocation is obtained by using the function extremum method. Theoretical analysis demonstrates that the proposed scheme has low computational complexity, and the simulation results show that sum throughput of the proposed scheme is no less than that of the existing schemes in the same scenario.

Heterogeneous cyber-physical network coexistence through interference contribution rate and uplink power control algorithm (ICR-UPCA) in 6G edge cells

Optimizing power control for interference mitigation at the network cell edge is pivotal in enhancing capacity within a heterogeneous cyber-physical infrastructure, such as smart cities, manufacturing, healthcare, energy grids, transportation, and agriculture, among others. In this paper, we consider the intricate dynamics of Internet of Things (IoT) 5/6G edge users, with a particular focus on the Interference Contribution Rate (ICR), where macro and femtocells are critical network infrastructures. Existing approaches has drawbacks such as computational complexity, overhead, and co-channel interference, among others. However, to fully address interference challenges from the coexistence of diverse network hierarchies, preserving the Quality of Service for femtocell users is prioritized. The paper concurrently enhances the handoff mechanism of cell edge users in the macro cell network. A two-tier heterogeneous network (HetNet) is utilized to initially assess the contribution of edge user equipment (UE) to interference levels during its active state while quantifying it as ICR. Game theory is used to formulate a cohesive model for the coexistence of macro cell (MUE) and femtocell users (FUE). ICR-based uplink power control and reference signal received quality (RSRQ)-based handoff algorithms are deployed to regulate interference levels and enhance the Signal-to-Interference-Noise Ratio (SINR) of the MUE at the cell edge. This is achieved through coordinated transmit power adjustments by both user types. Results indicate a 6.67 % channel capacity loss (interference tolerance) by the FUE, leading to a 12.5 % improvement, translating to approximately 4 Mbps and 1 Mbps channel enhancements, respectively. The MUE and FUE can effectively coordinate power control with minimal overhead, accepting compromises in network channel quality. This approach facilitates improved MUE data access rates while ensuring the preservation of FUE. We show that interference is successfully mitigated through power control in heterogeneous networks with lower computational complexity.

Indoor Sound Source Localization via Inverse Element-Free Simulation Based on Joint Sparse Recovery

Indoor sound source localization is a key technique in many engineering applications, and an inverse element-free method based on joint sparse recovery in a Bayesian framework is proposed for reverberant environments. In this method, a discrete wave model is constructed to represent the relationships between the sampled sound pressure and the source intensity distribution, and localization in the reverberant environment is realized via inversion from the wave model. By constructing a compact supporting domain, the source intensity can be sparsely represented in subdomains, and the sparse Bayesian framework is used to recover the source intensity. In particular, joint sparse recovery in the frequency domain is exploited to improve the recovery performance. Numerical and experimental verifications show that, compared with another state-of-the-art method, the proposed method achieves high source-localization accuracy and low sidelobes with low computational complexity in highly reverberant environments.

A phenomenological model for predicting the size of soot primary particles emitted from an aero-engine combustor

Soot particles emitted from aero-engines are harmful to airport local air quality, and the adverse impact from soot particles is closely related to particle morphology, microstructure and chemical properties. To understand those properties of aviation soot particles, combustion experiments using conventional aviation fuel RP-3 were conducted on a Rich-Burn/Quick-Quench/Lean-Burn (RQL) aero-engine combustor. The soot emissions from the RQL combustor were analyzed via a high resolution transmission electron microscope (HRTEM), and the size distributions of primary particles at different power levels were determined based on the HRTEM images. Since the primary particle size is strongly related to the power level and follows an S-shaped curve, a phenomenological model with low-computational complexity and general applicability was established. Furthermore, the model was validated by using previously published experimental data of a CFM56–2C1 aero-engine burning four different fuels, including sustainable aviation fuels (SAF), demonstrating the influence of fuel properties on primary particle sizes at different power levels.Novelty and Significance Statement: In this paper, combustion experiments were conducted on an RQL combustor burning RP-3 fuel. Based on the HRTEM observation, the log-normal size distributions of primary particles at different power levels were determined. Furthermore, based on the fact that the relationship between primary particle size and power level followed an S-shaped curve, a phenomenological model linking primary particle size and combustor power was proposed and validated.

Optimizing dialysis water treatment based on medical planning requirements

This paper introduces a new approach to improving hemodialysis and peritoneal dialysis processes. This maintains compatibility between the water treatment unit and active dialysis machines. Identification of different deviations in the patient’s requirements to classify the suitable flow rate (FR) of the pure water can be created through an Adaptive Neuro-Fuzzy Inference System (ANFIS). Four types of categories are classified: quarter load, half load, three-quarter load, and full load. This includes two main steps: identifying the dialysis categories with patients and measuring the suitable FR for each category. The effective FR of water was computed to indicate how the number of pumps rose as the number of patients treated within the dialysis unit increased. The introduced prediction method was tested against artificial neural networks to predict alum doses (ANN-AD) method, artificial intelligence as a combinatorial optimization strategy (AN-COS) using peach-palm waste in a solid-state fermentation environment, expert system applications (ESA) in chronic kidney disease management (MDSSs), prescription optimization for automated peritoneal dialysis (BCPH). In this work, pumping system parameter estimation was utilized to assess the performance of the introduced systems based on input voltage, input current, rotor speed, and electromagnetic torque waveforms of the pumping drive. This method uses the ANFIS algorithm to construct a high-performance pumping system to evaluate and predict the flow rate of dialysis machines based on input–output estimates. The flow rate values for each patient in critical care units can be controlled by the presented algorithm according to the time of dialysis. A good predictive model based on integrating the experience and decision making of medical planners was implemented. The proposed method not only improves accuracy but also saves time in the dialysis unit. The presented fuzzy classifier uses the ratio of the number of predicted true positives and false positives to the total number of anticipated positives. The simulation results show that the proposed technique can be successfully used to classify the suitable FR of the water according to the hemodialysis load. One of the advantages of the presented technique is the ability to predict the value of FR in real time with reliability, low computational complexity, and a high accuracy of 98.01%, which simplifies the dialysis process for many patients while at the same time leading to improved performance of hemodialysis. The presented method can be implanted in online FR estimation and analysis hardware for hemodialysis, is easy to calculate and run in real time, minimizes hemodialysis costs, and saves run time.

OP-FCNN: an optronic fully convolutional neural network for imaging through scattering media.

Imaging through scattering media is a classical inverse issue in computational imaging. In recent years, deep learning(DL) methods have excelled in speckle reconstruction by extracting the correlation of speckle patterns. However, high-performance DL-based speckle reconstruction also costs huge hardware computation and energy consumption. Here, we develop an opto-electronic DL method with low computation complexity for imaging through scattering media. We design the "end-to-end" optronic structure for speckle reconstruction, namely optronic fully convolutional neural network (OP-FCNN). In OP-FCNN, we utilize lens groups and spatial light modulators to implement the convolution, down/up-sampling, and skip connection in optics, which significantly reduces the computational complexity by two orders of magnitude, compared with the digital CNN. Moreover, the reconfigurable and scalable structure supports the OP-FCNN to further improve imaging performance and accommodate object datasets of varying complexity. We utilize MNIST handwritten digits, EMNIST handwritten letters, fashion MNIST, and MIT-CBCL-face datasets to validate the OP-FCNN imaging performance through random diffusers. Our OP-FCNN reveals a good balance between computational complexity and imaging performance. The average imaging performance on four datasets achieves 0.84, 0.91, 0.79, and 16.3dB for JI, PCC, SSIM, and PSNR, respectively. The OP-FCNN paves the way for all-optical systems in imaging through scattering media.

Artificial compressibility method for high-pressure transcritical fluids at low Mach numbers

Supercritical fluids possess unique properties that makes them relevant in various scientific and engineering applications. However, the experimental investigation of these fluids is challenging due to the high pressures involved and their complex thermophysical behavior. To overcome these limitations, computational researchers employ scale-resolving methods, such as direct numerical simulation and large-eddy simulation to study them. Nonetheless, these methods require substantial computational resources, especially in the case of low-Mach-number regimes due to the disparity between acoustic and hydrodynamic/thermal time scales. This work, therefore, addresses this problem by extending the artificial compressibility method to high-pressure transcritical fluids. This method is based on decoupling the thermodynamic and hydrodynamic parts of the pressure field, such that the acoustic time scales can be externally modified without severely impacting the flow physics of the problem. In addition, the method proposed has two key characteristics: (i) the splitting method presents low computational complexity, and (ii) an automatic strategy for selecting the speedup factor of the approach is introduced. The effectiveness of the resulting methodology is demonstrated through comprehensive numerical tests of increasing complexity, showcasing its ability to accurately simulate a wide range of high-pressure transcritical flows including turbulence. The results obtained indicate that the approach proposed can readily lead to computational speedups larger than 10× without significantly compromising the accuracy of the numerical solutions.

Analytic Design Technique for 2D FIR Circular Filter Banks and Their Efficient Implementation Using Polyphase Approach.

This paper proposes an analytical design procedure for 2D FIR circular filter banks and also a novel, computationally efficient implementation of the designed filter bank based on a polyphase structure and a block filtering approach. The component filters of the bank are designed in the frequency domain using a specific frequency transformation applied to a low-pass, band-pass and high-pass 1D prototype with a specified Gaussian shape and imposed specifications (peak frequency, bandwidth). The 1D prototype filter frequency response is derived in a closed form as a trigonometric polynomial with a specified order using Fourier series, and then it is factored. Since the design starts from a 1D prototype with a factored transfer function, the frequency response of the designed 2D filter bank components also results directly in a factored form. The designed filters have an accurate shape, with negligible distortions at a relatively low order. We present the design of two types of circular filter banks: uniform and non-uniform (dyadic). An example of image analysis with the uniform filter bank is also provided, showing that the original image can be accurately reconstructed from the sub-band images. The proposed implementation is presented for a simpler case, namely for a smaller size of the filter kernel and of the input image. Using the polyphase and block filtering approach, a convenient implementation at the system level is obtained for the designed 2D FIR filter, with a relatively low computational complexity.

Asymmetric morphological filter for roughness evaluation of multifunctional surfaces

The scope of multifunctional surfaces in mechanical engineering and instrumentation is constantly expanding. Examples are products with multilayer coatings, products made of composite materials or using additive manufacturing technologies. A feature of multifunctional surfaces is two levels of texture with different parameter values. Various types of filters are used to decomposition and then analyze texture components. Traditionally, for such problems, a robust Gaussian regression filter and a morphological filter are used. The advantage of the morphological filter lies in the lower computational complexity and the ease of removing the shape component from the profile. This research presents generalized analysis of various types of an asymmetric morphological filter based on simulation. The asymmetric filter differs from the standard morphological filter by using different nesting indexes for combinations of morphological opening and closing operations. We have designed a compositional model of profile, which is superposition of two Gaussian distributions with different parameters and waviness. Relative filtering error of the arithmetic mean heights Ra was chosen as evaluation parameter. Based on the Monte Carlo experiments technique, the relative errors of the filters are determined. The main result of the research is algorithm for choosing nesting indexes depending on the type of primary profile. Thus, we give scientifically justified choice of the filter type and its task-specific parameters for applied use. The choice of filter type and two different nesting indexes in accordance with the developed algorithm provide relative error with a coverage interval less 3 % for 95 % coverage probability. The asymmetric morphological filter is effective for scale space analysis of surfaces with significant shape errors and waviness. The results obtained can be used to analyze the tribological properties of multifunctional surfaces of products.

Efficient and Low-Complex Signal Detection with Iterative Feedback in Wireless MIMO-OFDM Systems.

To solve error propagation and exorbitant computational complexity of signal detection in wireless multiple-input multiple-output-orthogonal frequency division multiplexing (MIMO-OFDM) systems, a low-complex and efficient signal detection with iterative feedback is proposed via a constellation point feedback optimization of minimum mean square error-ordered successive interference cancellation (MMSE-OSIC) to approach the optimal detection. The candidate vectors are formed by selecting the candidate constellation points. Additionally, the vector most approaching received signals is chosen by the maximum likelihood (ML) criterion in formed candidate vectors to reduce the error propagation by previous erroneous decision, thus improving the detection performance. Under a large number of matrix inversion operations in the above iterative MMSE process, effective and fast signal detection is hard to be achieved. Then, a symmetric successive relaxation iterative algorithm is proposed to avoid the complex matrix inversion calculation process. The relaxation factor and initial iteration value are reasonably configured with low computational complexity to achieve good detection close to that of the MMSE with fewer iterations. Simultaneously, the error diffusion and complexity accumulation caused by the successive detection of the subsequent OSIC scheme are also improved. In addition, a method via a parallel coarse and fine detection deals with several layers to both reduce iterations and improve performance. Therefore, the proposed scheme significantly promotes the MIMO-OFDM performance and thus plays an irreplaceable role in the future sixth generation (6G) mobile communications and wireless sensor networks, and so on.

A survey on filtered-x least mean square-based active noise control systems with emphasis on reducing computational complexity

Active noise control (ANC) is gaining ever-increasing attention owing to its powerful ability to attenuate low-frequency noise. The computational complexity of an ANC system may directly affect its computational efficiency, control performance, and hardware costs. Therefore, the focus of this paper is mainly on discussing the development of ANC systems with emphasis on reducing computational complexity. The ANC systems are classified into two groups of narrowband and broadband systems. The computational complexity analysis is provided to show the computational merit of each system with respect to the conventional ANC systems. In addition, numerical simulations are performed to evaluate the convergence speed and noise reduction performance of the considered systems. The results show that, in the narrowband ANC systems, the LFE-NANC, CFX-NANC and BFX-NANC systems enjoy better overall performance in terms of the computational complexity, convergence speed and steady-state error, and in the broadband ANC systems, the DF-BANC system has the lowest computational complexity but cannot effectively attenuate the broadband noise with high spectral dynamics, whereas the DS-BANC and MDS-BANC systems can. This study provides in-depth insight into current typical low-complexity ANC systems.

Issue of VHF Continuous Emission Radars Coordinate Measurement Discrepancy

The research delves into the significance of continuous emission radars of very high frequency (VHF) range in detecting small unmanned aircraft and marine targets for navigation safety. Recognising the need for improved radars and reduced coordinate measurement errors, the study aims to analyse discrepancies in azimuth and range determination in radars with fixed-phased antenna arrays. By developing effective tools with low computational complexity for target azimuth determination, the research seeks to enhance radar performance. Employing analytical, classification, functional, and statistical methods, the study comprehensively examines the peculiarities and differences of radars. It meticulously analyses coordinate measurement errors and investigates their causes. The impact of these discrepancies on radar performance and their relevance in various applications, particularly maritime navigation, is carefully evaluated. The findings emphasise the critical role of continuous emission radars in ensuring shipping safety and economic efficiency. The recommendations derived from the study offer valuable insights for improving radar effectiveness, addressing operational limitations, and enhancing overall functionality. By tackling coordinate measurement errors and providing accurate azimuth determination tools, this research contributes to advancing continuous emission radar technology and its practical applications. Through its findings and recommendations, the study aims to optimise radar performance, enhance navigation safety, and improve economic efficiency in diverse sectors.

Solid-liquid phase transition temperature prediction of alloys based on machine learning key feature screening

A machine learning strategy is proposed based on the demand for prediction of solid-liquid phase transition temperature properties of multi-component precious metal alloys. Firstly, the candidate feature set are constructed by mathematical operation of the physical and chemical parameters of the material according to the chemical ratio of the alloy chemical formula. Then, a novel feature selection framework of correlation screening → genetic algorithm screening → feature weight ranking → exhaustive screening is proposed to effectively identify key feature combinations affecting solid-liquid phase transition temperature. Finally, the support vector regression algorithm is used to establish the "key feature combination-solid phase transition temperature" model with an error less than 9.83% and the "key feature combination-liquid phase transition temperature" model with an error less than 9.35%. The proposed new feature framework overcomes the inability of conventional feature selection techniques to simultaneously meet the requirements of interpretability, low computational complexity, and strong feature generality. Moreover, the comprehensive equilibrium complexity and accuracy (R2) constructed "solid temperature-key feature combination" with an error of less than 6.50% and "liquid phase transition temperature-key feature combination" with an error of less than 6.71 % by symbolic regression algorithm, which strengthened the understanding of the influence of key independent variable feature parameters on solid-liquid phase transition temperature prediction. This established machine learning strategy has excellent reliability in the prediction of solid-liquid phase transition temperature of multi-component alloys, and the proposed feature selection framework is expected to develop into a new feature selection technique.

Cell-free ISAC massive MIMO systems with capacity-constrained fronthaul links

Integrated sensing and communication (ISAC), millimeter wave (mmWave) massive multiple-input multiple-output (MIMO), and cell-free networks are emerged as some of the most potential physical layer enablers for the future wireless communication networks. In this paper, we consider a cell-free ISAC mmWave massive MIMO system with hybrid analog and digital precoders while accounting for the impacts of capacity-constrained fronthaul links. In the system, the digital baseband processing is dictated at a geographical scale while the analog precoders are carried out at each transmit access point (AP). Based on the characteristics of the considered model, we formulate the optimization problem as a function of power allocation and fronthaul compression strategies. To address this problem, two block coordinate descend (BCD)-based methods are proposed to alternatively solve the three decomposed subproblems corresponding to the power allocation, the downlink and backward fronthaul compression strategies. Simulation results indicate that the proposed schemes can achieve 90% performance of the optimal full-search (FS) method with much lower computational complexity. In addition, there exists an optimal configuration of APs, UEs, and antennas for a cell-free ISAC system with capacity-constrained fronthaul links.

Randomized low rank approximation for nonnegative pure quaternion matrices

Pure quaternion matrix has been widely employed to represent data in real-world applications, such as colour images. Additionally, the imaginary part of quaternion matrix is usually nonnegative due to the natural nonnegativity of real-world data. In this paper, we propose an alternating projection-based algorithm for low rank nonnegative pure quaternion matrix approximation, which can exactly calculate the optimal fixed rank approximation while preserve the pure and nonnegative properties from the given data. More concretely, the proposed algorithm alternatively projects the given quaternion matrix onto the fixed rank quaternion matrix set and nonnegative pure quaternion matrix set in an iterative fashion. Moreover, we establish the theoretical convergence guarantee of the proposed algorithm. To extend the proposed algorithm to large-scaled data, we further propose a randomized algorithm with significant lower computational complexity and comparable accuracy. Numerical experiments on colour images show that our algorithms outperform the other state-of-the-art algorithms.

Fast Transceiver Design for RIS-Assisted MIMO mmWave Wireless Communications

Due to high bandwidth and small antenna size, millimeter-wave (mmWave) integrated line-of-sight (LOS) multiple-input-multiple-output (MIMO) systems have attracted much attention. Reconfigurable intelligent surfaces (RISs), which have the potential to change the characteristics of incident electromagnetic waves with low power cost, can improve the performance for the MIMO mmWave wireless communications. Uniform circular array (UCA) is an effective antenna structure with low complexity transceiver. In this paper, UCA based RIS-assisted MIMO mmWave wireless communications with transmit UCA, the RIS UCAs, and receive UCA are investigated. Since the rotation angles between the transceiver make the channel matrix noncirculant, an algorithm is developed to derive the ranges of the rotation angles based on an acceptable error and reduce the impact of rotation angles on channel matrix. Then, we propose a low-complexity precoding scheme at the transmitter, phase designs at the RIS UCAs, and a phase compensation scheme at the receiver, which can convert the channel matrix into an equivalent circulant channel matrix with a small error. Then, a fast symbol-wise maximum likelihood (ML) detection scheme is proposed to recover the signals with low computational complexity. Simulation results are presented to illustrate the theory.

A novel multi-layer modular approach for real-time fuzzy-identification of gravitational-wave signals

Advanced LIGO and Advanced Virgo ground-based interferometers are instruments capable to detect gravitational wave (GW) signals exploiting advanced laser interferometry techniques. The underlying data analysis task consists in identifying specific patterns in noisy timeseries, but it is made extremely complex by the incredibly small amplitude of the target signals. In this scenario, the development of effective GW detection algorithms is crucial. We propose a novel layered framework for real-time detection of GWs inspired by speech processing techniques and, in the present implementation, based on a state-of-the-art machine learning approach involving a hybridization of genetic programming and neural networks. The key aspects of the newly proposed framework are: the well structured, layered approach, and the low computational complexity. The paper describes the basic concepts of the framework and the derivation of the first three layers. Even if, in the present implementation, the layers are based on models derived using a machine learning approach, the proposed layered structure has a universal nature. Compared to more complex approaches, such as convolutional neural networks, which comprise a parameter set of several tens of MB and were tested exclusively for fixed length data samples, our framework has lower accuracy (e.g. it identifies of low signal-to-noise-ration GW signals, against of the state-of-the-art, at a false alarm probability of 10−2), but has a much lower computational complexity (it exploits only 4 numerical features in the present implementation) and a higher degree of modularity. Furthermore, the exploitation of short-term features makes the results of the new framework virtually independent against time-position of GW signals, simplifying its future exploitation in real-time multi-layer pipelines for gravitational-wave detection with new generation interferometers.