Low Yield Research Articles

Solvent-Driven Room-Temperature Curtius Rearrangements to Access Nucleotides Bearing Substituted Fused Pyridones.

The intramolecular Curtius rearrangement suffers from a high reaction temperature, low yields, tedious product isolation, and difficult scale up. This study presents a room-temperature Curtius rearrangement that can be novelly driven by the HFIP solvent, followed by light-illuminated intramolecular cyclization. Such a mild reaction allows for the preparation of various fused pyridone derivatives with diverse substituent groups that have rarely been incorporated by previous methods. The roles of HFIP and light are investigated by a set of control experiments through a combination of IR and NMR titration. Furthermore, using the substituted fused pyridones as unnatural bases, we can obtain a panel of new nucleotides.

Screening of enhanced biohydrogen production from anaerobic fermentation amended with nano-sized barium ferrite supported by aluminum oxide

Anaerobic fermentation has attracted wide attention to effectively reduce carbon footprint and alleviate potential energy shortages, which is being regarded as a sustainable and promising technology to obtain high biohydrogen production from widespread organic wastes. However, biohydrogen commercial uptake is now dominantly inhibited by the low hydrogen yield and process instability. In this work, Al2O3/BaFe2O4 nanoparticles (NPs) are successfully applied to anaerobic fermentation for investigating their effects on hydrogen yield, activity of bacteria and microbial community structure. The benefits of Al2O3/BaFe2O4 NPs with respect to microbial metabolism, reactivity of enzymes and process optimization are systematically researched through batch experiments. In addition, various characterizations are used to verify the physical and chemical properties of Al2O3/BaFe2O4 NPs. The results show that the activity of hydrogenases and microbe metabolism can be significantly inhibited by excess addition of Al2O3/BaFe2O4 NPs (150 mg/L and 200 mg/L) while the optimum addition 100 mg/L of Al2O3/BaFe2O4 NPs can boost the biohydrogen yield by 49% via facilitating microorganism growth and enhancing key enzymatic activities, which indicate that the Al2O3/BaFe2O4 NPs display a beneficial influence on electron transfer efficiency and process stability. The existence of Fe3+, Al3+and Ba2+ derived from the corrosion of Al2O3/BaFe2O4 NPs by organic acids synergistically improve the microbial transmembrane transportation and substrate utilization, which contribute to higher conversion rate of glucose into acetate, butyrate and H2. Meanwhile, the complementary functions of Fe3+ and Al3+ can powerfully shorten the lag phase and promote the glycolysis, which finally accelerate the dark fermentation process. Compared with the control group, Clostridium_sensu_stricto_1 is selectively enriched by the addition of Al2O3/BaFe2O4 NPs, which keep heavily involved in the synthesis of H2. On balance, this study provides an effective strategy to enhance hydrogen productivity and maintain process stability, which offer the valuable information for the sustainable utilization of sewage sludge.

New Method for Obtaining Carboxylic Derivatives of Oxazolo[5,4-b]pyridine Based on 3-Aminopyridine-2(1H)-ones

Current methods for synthesis of oxazolo[5,4-b]- and oxazolo[4,5-b]pyridines have several limitations, such as severe reaction conditions, lengthy reaction times, low yields and concurrent formation of side reaction products. This article presents the results of study focused on a one-step method for the synthesis of new derivatives of oxazolo[5,4-b]pyridine incorporating an aliphatic carboxylic group as a linker. During the investigation of acylation reactions of 3-aminopyridine-2(1H)-ones with cyclic anhydrides of dicarboxylic acids (succinic, maleic and glutaric), it was found that the monoamides formed at the initial stage undergo intramolecular cyclization yielding derivatives of oxazolo[5,4-b]pyridine. Subsequently, the reaction conditions were studied and optimized to achieve the target compounds with high yield and purity. The potential anti-inflammatory activity of the obtained derivatives of oxazolo[5,4-b]pyridine was evaluated by molecular docking method using AutoDock Vina software. Compounds 11-14b exhibited higher binding affinity with the selected target protein Prostaglandin synthase-2 (1CX2) compared to the reference anti-inflammatory drug diclofenac. Thus, taking into account the results of in silico analyses, the newly synthesized oxazolo[5,4-b]pyridine derivatives based on 3-aminopyridine-2(1H)-ones are promising candidates for further investigation of their potential anti-inflammatory activity through in vivo methods.

Organic Farming vs. Integrated Nutrient Management: A Comparative Review of Agricultural Productivity and Sustainability

In an era where sustainable agriculture is crucial for global food security and environmental preservation, organic farming and Integrated Nutrient Management (INM) have emerged as leading practices. This review paper offers a comprehensive comparison of these two approaches, focusing on their impact on agricultural productivity and sustainability. Organic farming, with its emphasis on reducing the use of chemical fertilizers, pesticides, growth hormones, and feed additives, aligns closely with the principles of sustainability. It enhances food quality, promotes soil health, and mitigates adverse environmental effects by encouraging natural recovery cycles. However, organic farming's limitations, such as lower yields and a more labour-intensive approach have prompted interest in innovative solutions that blend organic practices with modern technologies. Integrated Nutrient Management (INM) presents a compelling alternative. By combining organic, inorganic, and biological nutrient sources, INM seeks to optimize nutrient use efficiency and maintain soil health. This approach offers a flexible nutrient management strategy, balancing organic and inorganic inputs to maintain crop productivity while reducing environmental impact. Studies have shown that INM can improve soil properties, such as bulk density, porosity, and water-holding capacity, leading to enhanced crop yields and lower greenhouse gas emissions. The paper explores how INM's integrated approach not only stabilizes crop production but also supports the growth of soil microbes, providing a source of energy and organic carbon. By using a combination of specific microorganisms, organic matter, and minimal doses of inorganic fertilizers, INM can achieve a harmonious balance that reduces environmental pollution and ensures long-term soil fertility. Ultimately, this review underscores the potential of combining organic and INM practices to create a sustainable and productive agricultural system. Through a comparative analysis, the paper aims to guide researchers, policymakers, and farmers towards adopting strategies that foster agricultural sustainability without compromising productivity.

Volumetric Additive Manufacturing of SiOC by Xolography.

Additive manufacturing (AM) of ceramics has significantly contributed to advancements in ceramic fabrication, solving some of the difficulties of conventional ceramic processing and providing additional possibilities for the structure and function of components. However, defects induced by the layer-by-layer approach on which traditional AM techniques are based still constitute a challenge to address. This study presents the volumetric AM of a SiOC ceramic from a preceramic polymer using xolography, a linear volumetric AM process that allows to avoid the staircase effect typical of other vat photopolymerization techniques. Besides optimizing the trade-off between preceramic polymer content and transmittance, a pore generator is introduced to create transient channels for gas release before decomposition of the organic constituents and moieties, resulting in crack-free solid ceramic structures even at low ceramic yield. Formulation optimization alleviated sinking of printed parts during printing and prevented shape distortion. Complexsolid and porous ceramic structures with a smooth surface and sharp features are fabricated under the optimized parameters. This work provides a new method for the AM of ceramics at µm/mm scale with high surface quality and large geometry variety in an efficient way, opening the possibility for applications in fields such as micromechanical systems and microelectronic components.

A Benign Synthesis Route to Terephthalic Acid via Two-Step Electrochemical Oxidation of P-xylene

Abstract Terephthalic acid is conventionally synthesized through the AMOCO process under harsh conditions, making milder electrosynthesis routes desirable. Electrooxidation of p-xylene has been demonstrated but the degree of oxidation is limited, resulting in low terephthalic acid yields. Here, we demonstrate a process with two electrochemical steps enabling the complete oxidation of p-xylene into terephthalic acid. The first electrochemical step achieves C-H activation of p-xylene using electrochemically generated bromine as a mediator, while the second electrochemical step does alcohol oxidation of 1,4-benzenedimethanol into terephthalate on NiOOH. The divided cell in the first step simultaneously generates acid and base that are utilized subsequently, negating the need of external acid and base addition and thus offering a cost competitive synthesis route. The competing bromide oxidation in the second step is suppressed by using constant voltage electrolysis at 0.50 V, where an optimal yield of terephthalic acid of 81% is achieved.

Development, validation and application of single molecule molecular inversion probe based novel integrated genetic screening method for 29 common lysosomal storage disorders in India

BackgroundCurrent clinical diagnosis pathway for lysosomal storage disorders (LSDs) involves sequential biochemical enzymatic tests followed by DNA sequencing, which is iterative, has low diagnostic yield and is costly due to overlapping clinical presentations. Here, we describe a novel low-cost and high-throughput sequencing assay using single-molecule molecular inversion probes (smMIPs) to screen for causative single nucleotide variants (SNVs) and copy number variants (CNVs) in genes associated with 29 common LSDs in India.Results903 smMIPs were designed to target exon and exon–intron boundaries of targeted genes (n = 23; 53.7 kb of the human genome) and were equimolarly pooled to create a sequencing library. After extensive validation in a cohort of 50 patients, we screened 300 patients with either biochemical diagnosis (n = 187) or clinical suspicion (n = 113) of LSDs. A diagnostic yield of 83.4% was observed in patients with prior biochemical diagnosis of LSD. Furthermore, diagnostic yield of 73.9% (n = 54/73) was observed in patients with high clinical suspicion of LSD in contrast with 2.4% (n = 1/40) in patients with low clinical suspicion of LSD. In addition to detecting SNVs, the assay could detect single and multi-exon copy number variants with high confidence. Critically, Niemann-Pick disease type C and neuronal ceroid lipofuscinosis-6 diseases for which biochemical testing is unavailable, could be diagnosed using our assay. Lastly, we observed a non-inferior performance of the assay in DNA extracted from dried blood spots in comparison with whole blood.ConclusionWe developed a flexible and scalable assay to reliably detect genetic causes of 29 common LSDs in India. The assay consolidates the detection of multiple variant types in multiple sample types while having improved diagnostic yield at same or lower cost compared to current clinical paradigm.

Efficient phosphate and hydrogen recovery from sludge fermentation liquid by sacrificial iron anode in electro-fermentation system

Electro-fermentation (EF) has been extensively studied for recovering hydrogen and phosphorus from waste activated sludge (WAS), while was limited for the further application due to the low hydrogen yield and phosphorus recovery efficiency. This study proposed an efficient strategy for hydrogen and vivianite recovery from the simulated sludge fermentation liquid by sacrificial iron anode in EF. The optimum hydrogen productivity and the utilization efficiency of short chain fatty acids (SCFAs) reached 45.2 mmol/g COD and 77.6% at 5 d in pH 8. Phosphate removal efficiency achieved at 90.8% at 2 d and the high crystallinity and weight percentage of vivianite (84.8%) was obtained. The functional microbes, i.e., anaerobic fermentative bacteria, electrochemical active bacteria, homo-acetogens and iron-reducing bacteria were highly enriched and the inherent interaction between the microbial consortia and environmental variables was thoroughly explored. This work may provide a theoretical basis for energy/resource recovery from WAS in the further implementation.

Evaluation of fecal sample collection methods for feline gut microbiome profiling: fecal loop vs. litter box

IntroductionMicrobial population structures within fecal samples are vital for disease screening, diagnosis, and gut microbiome research. The two primary methods for collecting feline fecal samples are: (1) using a fecal loop, which retrieves a rectal sample using a small, looped instrument, and (2) using the litter box, which collects stool directly from the litter. Each method has its own advantages and disadvantages and is suitable for different research objectives.Methods and resultsWhole-genome shotgun metagenomic sequencing were performed on the gut microbiomes of fecal samples collected using these two methods from 10 adult cats housed in the same research facility. We evaluated the influence of collection methods on feline microbiome analysis, particularly their impact on DNA extraction, metagenomic sequencing yield, microbial composition, and diversity in subsequent gut microbiome analyses. Interestingly, fecal sample collection using a fecal loop resulted in a lower yield of microbial DNA compared to the litterbox method (p = 0.004). However, there were no significant differences between the two groups in the proportion of host contamination (p = 0.106), virus contamination (p = 0.232), relative taxonomy abundance of top five phyla (Padj > 0.638), or the number of microbial genes covered (p = 0.770). Furthermore, no significant differences were observed in alpha-diversity, beta-diversity, the number of taxa identified at each taxonomic level, and the relative abundance of taxonomic units.DiscussionThese two sample collection methods do not affect microbial population structures within fecal samples and collecting fecal samples directly from the litterbox within 6 hours after defecation can be considered a reliable approach for microbiome research.

Optimization of ultrasonic pretreatment and analysis of chlorogenic acid in potato leaves

Chlorogenic acid (CA) is an effective ingredient that can strengthen immunity during following the COVID-19 era. The current cost of CA is high owing to its complex purification process and low yield (approximately 2%). In this study, a one-step path orthogonal experiment was designed based on the results from Gauss calculation, which consisted of acidity, coordination, and hydrolysis in molecules. The optimized extraction conditions were 60 ℃, 60 min, 1:20 liquid ratio, and 40% ethanol in a nitrogen atmosphere controlled using a device of our own design, which led to CA yields of up to 6.35% from potato leaves. The purified CA was analyzed using high-performance liquid chromatography, thin-layer chromatography, ultraviolet–visible spectroscopy, and molecular fluorescence. This accurate and reproducible method can not only be used to obtain high yields of CA but can also be used for the quality control of active plant products and their isomers.

Super-resolution proximity labeling with enhanced direct identification of biotinylation sites

Promiscuous labeling enzymes, such as APEX2 or TurboID, are commonly used in in situ biotinylation studies of subcellular proteomes or protein–protein interactions. Although the conventional approach of enriching biotinylated proteins is widely implemented, in-depth identification of specific biotinylation sites remains challenging, and current approaches are technically demanding with low yields. A novel method to systematically identify specific biotinylation sites for LC-MS analysis followed by proximity labeling showed excellent performance compared with that of related approaches in terms of identification depth with high enrichment power. The systematic identification of biotinylation sites enabled a simpler and more efficient experimental design to identify subcellular localized proteins within membranous organelles. Applying this method to the processing body (PB), a non-membranous organelle, successfully allowed unbiased identification of PB core proteins, including novel candidates. We anticipate that our newly developed method will replace the conventional method for identifying biotinylated proteins labeled by promiscuous labeling enzymes.

Towards food security: Exploring the spatio-temporal dynamics of soybean in India

India is the world’s largest edible oil importer, and soybean oil accounts for a major portion of those imports, with implications for the Indian economy. Despite being the 4th largest globally in terms of harvested soybean area and 5th largest in terms of production, India is still heavily dependent on imports to meet the vegetable oil requirement for its population. It is therefore imperative to understand the dynamics and trends in India’s soybean production to help the country achieve self-sufficiency in edible oils. This study provides the first spatially explicit analysis of soybean in India, using long-term spatial and temporal statistics at national and subnational levels, using spatial and temporal statistical analysis models to examine the historical trends and its future prospects. Our analysis details the overall soybean expansion across the country and the increase in production but we also note that the annual growth rate has declined in each consecutive decade even though the area continues to expand. The average national yield has been stagnant at around 1 T/Ha but for some of the low-producing districts, a higher yield of more than 3 T/ha is reported. For most major producing districts, soybean yields are below 1.5 T/Ha. The state of Madhya Pradesh which was the major soybean producer is now matched by the state of Maharashtra in terms of production, however, Madhya Pradesh still has the largest area under soybean. We analyzed soybean hotspot expansion in India and found that the mean center of the soybean area and production has shifted approximately 93 km towards the south and 24 km to the west as the crop is rapidly being adopted in the southern and western parts of India expanding the hotspot in these parts. District-level analysis showed that the total number of districts constituting hotspots of soybean cultivation in India has increased from 29 to 42 in three decades. Furthermore, analysis of soybean oil and meal consumption with respect to the national population, import, export, domestic production, GDP per capita, and price of soybean oil and meal suggests that soybean oil and meal are highly correlated with GDP per capita and population, indicating that consumption of soybean oil and meal is likely to increase as GDP per capita increases, and future demand is expected to rise with the anticipated growth in the Indian population. Increased soybean production can play a significant role in increasing national food security for India and reducing dependence on foreign oil imports and also help the economy with soy meal exports. Understanding the spatiotemporal variability in area and yield will help target interventions to increase production. Given the overall low yields with high variability in production, particularly in recent years primarily due to successive extreme rains and droughts in major producing districts and the overall need to increase production to meet the country’s demand, there is a pressing need for government policies and research aimed at narrowing the yield gap and developing soybean varieties that are more productive and resilient to climate change.

Rejuvenating potato growth and yield in challenging semiarid and saline sandy Cholistan: harnessing PGPB-coated N and P application strategies

BackgroundPotato serves as a major non-cereal food crop and income source for small-scale growers in Punjab, Pakistan. Unfortunately, improper fertilization practices have led to low crop yields, worsened by challenging environmental conditions and poor groundwater quality in the Cholistan region. To address this, we conducted an experiment to assess the impact of two fertilizer application approaches on potato cv. Barna using plant growth-promoting bacteria (PGPB) coated biofertilizers. The first approach, termed conventional fertilizer application (CFA), involved four split applications of PGPB-coated fertilizers at a rate of 100:75 kg acre–1 (N and P). The second, modified fertilizer application (MFA), employed nine split applications at a rate of 80:40 kg acre–1.ResultsThe MFA approach significantly improved various plant attributes compared to the CFA. This included increased plant height (28%), stem number (45%), leaf count (46%), leaf area index (36%), leaf thickness (three-folds), chlorophyll content (53%), quantum yield of photosystem II (45%), photosynthetically active radiations (56%), electrochromic shift (5.6%), proton flux (24.6%), proton conductivity (71%), linear electron flow (72%), photosynthetic rate (35%), water use efficiency (76%), and substomatal CO2 (two-folds), and lowered non-photochemical quenching (56%), non-regulatory energy dissipation (33%), transpiration rate (59%), and stomatal conductance (70%). Additionally, the MFA approach resulted in higher tuber production per plant (21%), average tuber weight (21.9%), tuber diameter (24.5%), total tuber yield (29.1%), marketable yield (22.7%), seed-grade yield (9%), specific gravity (9.6%), and soluble solids (7.1%). It also reduced undesirable factors like goli and downgrade yields by 57.6% and 98.8%, respectively. Furthermore, plants under the MFA approach exhibited enhanced nitrogen (27.8%) and phosphorus uptake (40.6%), with improved N (26.1%) and P uptake efficiency (43.7%) compared to the CFA approach.ConclusionThe use of PGPB-coated N and P fertilizers with a higher number of splits at a lower rate significantly boosts potato production in the alkaline sandy soils of Cholistan.

Microwave-Assisted dry reforming of toluene as a model tar compound using low-cost iron catalyst for syngas clean-up

Gasification of waste feedstock such as biomass, waste plastics suffers from high tar yields during hydrogen-rich syngas production. The presence of tars result in lower quality syngas, lower syngas yields, reactor blockage, reactor down time, and costly maintenance. Therefore, removal of tar from syngas during gasification is essential. Catalytic reforming of tars via in-situ syngas cleanup is an effective way of mitigating tars. This work explores the possibility of microwave-assisted catalytic dry reforming of tars for syngas production. Due to its chemical complexity, toluene, which is one of the main tar constituents, could be used as a model tar compound. Toluene dry reforming was studied using the Fe/Al2O3 catalyst under CO2 under the temperature range of 400–700 ℃. The toluene reforming reaction was conducted using microwave and conventional thermal reactors. Under microwave irradiation, CO2 and toluene conversions are boosted to 80% at 500 ℃. Hydrogen and carbon monoxide yields were approximately five times and ten times higher in the microwave reactor at 500 ℃, respectively, compared to the productions obtained in the conventional fixed-bed reactor at 700 ℃. Filamentous carbon was also produced as a valuable side product to improve the economy of this process and such value-added carbon was only observed in the microwave reactor. Three reaction pathways were observed during microwave reaction: the toluene decomposition produces an initial hydrogen and carbon deposit on the catalyst; the formation of methane and benzene suggests toluene hydrodemethylation as a secondary reaction; and toluene hydrogenolysis forms light alkanes such as methane, and through reforming reaction under CO2 to syngas.

Superstrong and tough silk fibers cross-linked with functionalized graphene

Natural silkworm silks with an intriguing integration of good strength, modulus, toughness and biocompatibility, have been widely used in textile and medical industry. However, the strength of silkworm silks is inferior to that of spider dragline silks, which are the strongest natural silks but extremely low yield. Herein, we develop a feasible strategy to continuously produce superstrong and tough regenerated silk fibers (RSFs) through the reconstruction of hierarchical and cross-linked architectures. Amine functionalized graphene (NH2-G) has been introduced to improve the content of β-sheet and crystalline orientation, and glutaraldehyde (GA) has been used to bridge NH2-G and silk micro/nanofibrils (SNFs) to form a highly interconnected and closely packed network, resulting in the remarkably improvement of mechanical properties. The resultant fibers exhibit an excellent tensile strength of 1029.6 ± 144.8 MPa, a Young's modulus of 16.8 ± 1.5 GPa, and a toughness of 277.4 ± 17.0 MJ/m3, exceeding those of the natural silkworm silks, spider dragline silks and most other previously reported regenerated silk fibers. We believe that the high-performance silk-based fibers are promising applications in lightweight and advanced structural materials.

Mesoporous silica@polypyrrole and its epoxy composites with ultra-broadband electromagnetic wave absorption properties

Composite of powders with exceptional electromagnetic wave absorption (EMA) properties with resins is an important tactic for preparing electromagnetic wave (EMW) stealth composites. However, high expenditure, low yield and the complex synthesis of these powders constrain their utilization in composite materials. Moreover, composite materials need greater thickness to fulfill EMA requirements. This work reported a facilely producible absorber, mesoporous Silica@Polypyrrole (MSU-J@PPy), which exhibits enhanced EMA performance. The polymerization of PPy in the connected three-dimensional pores as well as on the surface of MSU-J led to the creation of conductive network thereby enhancing the conductive loss. MSU-J contributes to the lightweighting and impedance matching and promotes the formation of a non-homogeneous interface. By varying the ratio of PPy to MSU-J, precise control of EMA was realized. When the proportion of PPy to MSU-J by weight is 1.5:1, the reflection loss (RL) of MSU-J@PPy reaches an impressive −46.44 dB at 1.9 mm. The effective absorption bandwidth (EAB) is 6.08 GHz (11.92–18 GHz) at 2.1 mm thickness of the sample. Further, MSU-J@PPy and carboxylated multi-walled carbon nanotubes (cMWCNTs) was composited with epoxy resin (EP) to develop a wave-absorbing composites MSU-J@PPy/cMWCNTs/EP with ultra-broadband absorption properties and outstanding mechanical characteristics. At a thickness of 1.7 mm, the composite can effectively absorb EMW in the entire Ku band, and effective absorption across the 5.4–18 GHz range can be attained through changing the matching thickness. This work offers a novel approach for developing cost-effective, easily synthesized, and high-yield EMW absorbers, as well as their application in absorber composite materials.

Deprotection of N1-methyladenosine-containing RNA using triethylamine hydrogen fluoride

The N 1-methyladenosine (m1A) epigenetic modification exists in many RNAs and is related to many human diseases. Chemically synthesized RNAs containing the modification are required for projects aimed at studying biological processes, mechanisms, and pathogenesis related to m1A. Existing methods for the synthesis of m1A containing RNAs use tetrabutylammonium fluoride (TBAF) for the deprotection of the 2'-silyl protecting groups. Since TBAF is nonvolatile, and is relatively non-polar, its use in the desilylation of RNA requires repeated desalting, which is tedious and gives low yields. Here we report the use of the volatile and neat triethylamine hydrogen fluoride (TEA-HF) for desilylation of m1A RNA synthesis. We found that the method is much simpler, and—in our hands—give significantly higher yield of RNA. Two major concerns for m1A RNA synthesis are depurination and Dimroth rearrangement. HPLC and MALDI MS of the RNA indicated that depurination is not a problem for the new method. The absence of Dimroth rearrangement is proven by RNA digestion followed by HPLC analysis of the nucleosides.

Plant virus transmission during seed development and implications to plant defense system

Most plants produce large amounts of seeds to disperse their progeny in the environment. Plant viruses have evolved to avoid plant resistance mechanisms and use seeds for their dispersal. The presence of plant pathogenic viruses in seeds and suppression of plant host defenses is a major worldwide concern for producers and seed companies because undetected viruses in the seed can represent a significant threat to yield in many economically important crops. The vertical transmission of plant viruses occurs directly through the embryo or indirectly by getting in pollen grains or ovules. Infection of plant viruses during the early development of the seed embryo can result in morphological or genetic changes that cause poor seed quality and, more importantly, low yields due to the partial or ubiquitous presence of the virus at the earliest stages of seedling development. Understanding transmission of plant viruses and the ability to avoid plant defense mechanisms during seed embryo development will help identify primary inoculum sources, reduce virus spread, decrease severity of negative effects on plant health and productivity, and facilitate the future of plant disease management during seed development in many crops. In this article, we provide an overview of the current knowledge and understanding of plant virus transmission during seed embryo development, including the context of host-virus interaction.

Microbial and insect oils: A sustainable approach to functional lipid

AbstractThe increasing global population, coupled with the effects of climate change on agricultural activities has spurred a demand for sustainable food production to meet human needs. In response to this, there has been a growing interest in sustainable food production initiatives. One of such initiatives is harnessing microbial and insect lipids as valuable ingredients to address increase in demand for lipids across various sectors, including functional food, nutritional supplements, and biodiesel production. Over the last decades, there has been increasing scientific investigations exploring lipid from algae, microbes, and insects as alternatives to traditional agro‐ and marine‐based sources. This review, therefore, presents progress made in microbial and insect oils production, with emphasis on sustainability. Emerging extraction techniques, regulatory and safety requirements, and challenges that exist in the production and utilization of these new lipids are also discussed. The review shows that lipids from a wide range of oleaginous microorganisms and insect species have the potential to serve as a valuable ingredient for healthful food preparation. However, challenges such as cultural acceptance, lack of standardized regulations, high cost, and low yield associated with most emerging environmentally friendly extraction technologies continue to hinder widespread use or adoption of microbial and insect lipids on a global scale. These challenges call for innovations to reduce cost of production and improve lipids yield. So far, a substantial progress has been made in the utilization of readily available feedstocks such as industrial food wastes and sugar‐rich industrial wastewater to grow insects and microorganisms which will significantly reduce the processing costs.

Susceptibility of Zucchini Cultivars to Powdery Mildew (Podosphaera xanthii) under High and Low Nitrogen Regimes

Powdery mildew, primarily caused by Podosphaera xanthii, threatens cucurbit crop yield and longevity. Fungicides and resistant cultivars cannot fully manage or prevent the disease. Previous work has shown that powdery mildew incidence and severity can increase under high soil nitrogen. This study was conducted in Kentucky to determine disease severity and yield using a split plot design with nitrogen fertility (high: 140 kg/ha, low: 84 kg/ha) and zucchini cultivar (Cash Machine, Cue Ball, Desert, Dunja, Eight Ball, Emerald Delight, Golden Glory, Mexicana, and Spineless Perfection) as the main plot and subplot factors, respectively. In year one, powdery mildew severity was significantly higher in high soil nitrogen and varied significantly among cultivars. Yield was significantly lower in high soil nitrogen. Significant differences in fruit count, but not fruit weight, were observed among the cultivars. In year two, nitrogen did not significantly affect disease severity, but fruit weight and count were significantly lower in the high soil nitrogen treatment. ‘Golden Glory’ had significantly higher powdery mildew severity while ‘Mexicana’ and ‘Eight Ball’ had significantly lower severity compared to all other cultivars. Spineless Perfection had the highest fruit weight and was significantly higher than all other cultivars except for Cue Ball and Eight Ball. ‘Golden Glory’ had the highest fruit count and was significantly higher than all others except for ‘Dunja’. Nitrogen did not consistently affect disease severity throughout the study. The effects of powdery mildew on yield should be explored further, as heavily diseased plants did not always have low yield.