Volumetric Additive Manufacturing of SiOC by Xolography.

Abstract

Additive manufacturing (AM) of ceramics has significantly contributed to advancements in ceramic fabrication, solving some of the difficulties of conventional ceramic processing and providing additional possibilities for the structure and function of components. However, defects induced by the layer-by-layer approach on which traditional AM techniques are based still constitute a challenge to address. This study presents the volumetric AM of a SiOC ceramic from a preceramic polymer using xolography, a linear volumetric AM process that allows to avoid the staircase effect typical of other vat photopolymerization techniques. Besides optimizing the trade-off between preceramic polymer content and transmittance, a pore generator is introduced to create transient channels for gas release before decomposition of the organic constituents and moieties, resulting in crack-free solid ceramic structures even at low ceramic yield. Formulation optimization alleviated sinking of printed parts during printing and prevented shape distortion. Complexsolid and porous ceramic structures with a smooth surface and sharp features are fabricated under the optimized parameters. This work provides a new method for the AM of ceramics at µm/mm scale with high surface quality and large geometry variety in an efficient way, opening the possibility for applications in fields such as micromechanical systems and microelectronic components.