Lower Water Vapor Permeability Research Articles

Beet Root Peel Extract as a Natural Cost‐Effective pH Indicator and Food Preservative in Edible Film: Shelf Life Improvement of Cold‐Stored Trout Fillet

ABSTRACTIn this study, chitosan (C)‐polyvinyl alcohol (P) edible film containing bio‐fabricated nanosilver particles (nAg) (as antimicrobial agent) and beetroot peel extract (BRPE) (as antioxidant agent and pH indicator) was used as spoilage indicator in cold‐stored rainbow trout fillets. DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) radical scavenging activity (43.02%), reducing power (2.87), and total phenolic content (360.50 mg GAE/g) of ethanolic BRPE were higher than aqueous extract. Silver nanoparticles were biosynthesized using silver nitrate reduction by chitosan, confirmed by UV–Visible spectroscopy, optical and scanning electron microscope images, and X‐ray diffraction analysis. The highest tensile strength (4.20 MPa) and elongation at break (118%) belonged to the CP‐BRPE film, and the lowest water vapor permeability (2.45 10−5 g/s/m/P) was related to the CP‐nAg film. Also, the lowest total viable count (6.17 log CFU/g), psychrotrophic bacteria (6.27 log CFU/g), Enterobacteriaceae (4.9 log CFU/g), pH (5.66), total volatile basic‐nitrogen (TVB‐N) (22.1 mg/100 g of fish), and thiobarbituric acid reactive substances (TBARS) (0.705 mg MDA/kg of fish) values of the packaged trout fillets were significantly (p ≤ 0.05) observed in CP‐BRPE‐gnAg treatment among the other treatments at the end of the storage period, and CP‐gnAg, CP‐BRPE, and CP treatments were in the next ranks, respectively. Colorimetric analysis of the used films showed that the films containing BRPE depicted color spectra of red to yellow at the same time as the spoilage symptoms initiated in the packaged fillets. It is concluded that BRPE not only increased the preservative effects of chitosan‐polyvinyl alcohol film containing green silver nanoparticles but also can be considered as a natural cost‐effective spoilage indicator of the rainbow trout fillets during cold storage time.

Preparation and Characterization of Lithraea molleoides Gum Flour and Its Blend Films

Lithraea molleoides fruit gum (LMFG) is a valuable product obtained from the total hydrolysis of the fruit. The hydrolysis process involves three methods: thermal (LMFGT), alkaline (LMFGB), and acid (LMFGA). Through these methods, the aim is to break bonds and de-esterify polysaccharides, resulting in increased solubility and decreased molecular weight. The resulting hydrolysates are then combined with pectins in a 1:2 ratio to form films. In this study, the focus is on utilizing the hydrolysates of Lithraea molleoides gums for film applications, with an evaluation of their structural and physicochemical characteristics. The films produced exhibit excellent mechanical properties and low water vapor permeability, as well as exceptional thermal stability. These properties make them highly suitable for industrial films in pharmaceutical and food applications. This research highlights the potential of LMFG-based films as a viable solution for various industrial needs due to their outstanding performance across multiple parameters.

Preparation of active films with antioxidant and antimicrobial properties by combining ginger essential oil nanoemulsion with xylan and polyvinyl alcohol

Due to the environmental challenges of petroleum-based packaging, new biodegradable and active food packaging has garnered significant attention. In this work, active films were generated with xylan/polyvinyl alcohol (PVA) as the film-forming matrix, combined with ginger essential oil nanoemulsions (GEO-NEs) at varying concentrations (2.0 %, 4.0 %, 6.0 %, and 8.0 % w/w). The GEO-NEs, produced via ultrasound, had a mean particle size measuring 176.4 ± 1.2 nm and demonstrated excellent stability for up to 28 d. FTIR and XRD analyses revealed that interactions between GEO-NEs and the film matrix occurred through hydrogen bonding, indicating good compatibility between the components. Incorporating GEO-NEs significantly enhanced the UV shielding performance and mechanical characteristics of the composite films, achieving mechanical characteristics comparable to those of commercial packaging materials such as high-density polyethylene (HDPE). Additionally, composite films with 2 % and 4 % GEO-NEs exhibited lower water vapor permeability (WVP) than the control film, indicating improved water barrier performance. GEO-NEs also significantly improved the antioxidant activity of the composite films and imparted certain antimicrobial properties. As a result, these films hold promise for applications in active food packaging.

Sustainable Starch-Based Films from Cereals and Tubers: A Comparative Study on Cherry Tomato Preservation

Biodegradable films are sustainable alternatives to conventional plastics, particularly in food preservation, where the barrier and mechanical properties are crucial for maintaining the physicochemical, microbiological, and sensory qualities of the product. This study evaluated films made from starches of corn, potato, cassava, yam, and wheat to determine their effectiveness in preserving cherry tomatoes. Amylose content, a key factor influencing the crystallinity and properties of the films, varied among the sources, with wheat starch having the highest (28.2%) and cassava the lowest (18.3%). The wheat starch film emerged as the best formulation, exhibiting the highest tensile strength and the lowest water vapor permeability (4.1 ± 0.3 g∙mm∙m−2∙h−1∙KPa−1), contributing to superior barrier performance. When applied to cherry tomatoes, the films based on wheat and corn starch showed the least moisture loss over fifteen days, highlighting their potential in fresh food preservation. These results suggest that starch-based films, specifically those rich in amylose, have significant potential as biodegradable packaging materials for food product conservation.

Multifunctional electrospun nanofibrous film integrated with cinnamon essential oil emulsion stabilized by dealkali lignin for active packaging material

Cinnamon essential oil (CEO) has good antibacterial properties, but its volatility, hydrophobicity and bad odor limit its use in food preservation. In this study, a dealkali lignin (DAL) stabilized emulsion loaded with CEO was encapsulated into poly (vinyl alcohol) (PVA) and zein using an emulsion electrospinning technique. With the existence of DAL, the PVA/zein/DAL/CEO nanofibrous film (PVA/zein/DAL/CEO NF) exhibited good antioxidant properties. Moreover, higher antibacterial activity was achieved owing to the nanosized structure and enhanced stability compared to DAL/CEO emulsion and pure CEO. Scanning electron microscopy (SEM) revealed uniformly produced PVA/zein/DAL/CEO NF with an average diameter of 295 nm. The interactions among the nanofibrous film's components were confirmed using attenuated total internal reflectance fourier transform infrared spectroscopy (ATR-FTIR). The nanofibrous film demonstrated a low water vapor permeability (WVP) of 5.07 mm∙g/(m2∙h∙kPa), which was beneficial for reducing moisture transfer from the external environment to the interior of the packaging. Additionally, the PVA/zein/DAL/CEO NF also exhibited a marked enhancement in antioxidant activity, neutralizing 94.54 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals. The nanofibrous film also demonstrated potent antibacterial effects, with inhibition zones measuring 19.47 mm for Escherichia coli (E. coli) and 30.37 mm for Staphylococcus aureus (S. aureus), respectively. This study provided a reference for preparing a multifunctional electrospun nanofibrous film integrated with CEO as an active packaging material.

Rice starch-agar composite film decorated with green synthesized silver nanoparticles with superior properties

In this study glycerol-plasticized rice starch/agar-based eco-friendly composite film incorporated with Ocimum tenuiflorum and Murraya koenigii mixed leave extract (15 % v/v) and green synthesized silver nanoparticles (AgNPs) of concentration 1 mM were fabricated and evaluated the physical, mechanical, structural, antimicrobial and biodegradable properties. Sustainable packaging ought to lessen its ecological footprint and its effect on the environment. Boiled rice water, typically regarded as waste, is one of the best sources of starch. We used this boiled rice water to prepare the film directly. The aqueous leaf extract was also used for the synthesis of AgNPs via a simple, cost-effective and green approach. TEM analysis revealed an average particle size of 11.46 nm. Integration of the plant extract and AgNPs into the film matrix introduces antimicrobial properties against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria along with enhanced mechanical and barrier properties. SEM images displayed uniform and smooth surface of the films. The film containing AgNPs has the highest tensile strength of 11.4 ± 0.91 MPa with 56.8 ± 4.51 % elongation and the lowest water vapor permeability and water solubility (17.32 ± 2.20 %). This reveals that the prepared films can be employed as a promising, environmentally benign food packaging material to prolong the shelf life of the food. However, an increase in the concentration of AgNPs up to 2 mM, does not cause any significant improvements to the film’s overall properties. The fabricated films were utilized for wrapping green grapes, which show a reduction in weight loss and browning indicating the expansion of shelf life up to 12 days.

Characteristics and properties of co-precipitated protein and film based on Bambara groundnut protein isolate and fish skin acid-soluble collagen

Co-precipitated protein (CPP) from Bambara groundnut protein isolate (BGPI) and fish skin acid-soluble collagen (ASC) at different BGPI/ASC ratios (100:0, 75:25, 50:50, 25:75 and 0:100 (v/v)) were prepared and characterized. CPP of BGPI/ASC at ratio of 75:25 had higher solubility at acidic and alkaline pHs, compared to other CPP samples. All CPPs had good emulsifying properties. Based on protein patterns, the combination of major bands from BGPI and ASC in the resulting CPP sample was observed. CPP with BGPI/ASC at ratio of 75:25 showed higher surface hydrophobicity than those of other CPP samples. When the films from CPPs were fabricated, similar tensile strength (p > 0.05) was observed, regardless of BGPI/ASC ratios. Nevertheless, film from CPP with BGPI/ASC ratio of 25:75 had higher elongation at break along with lower water vapor permeability (p < 0.05), compared to other CPP films. All CPP films had bright-yellowish color. Increasing ASC ratio augmented (p < 0.05) light transmission of resulting CPP films. FTIR spectra revealed that all CPP films had the similar pattern and functional groups. Therefore, the co-precipitated BGPI and ASC at appropriate ratio could improve properties of resulting proteins, especially for film forming ability.

Characterizations of the pullulan/sodium alginate coatings incorporated with sodium silicate and EDTA-2Na and the antifungal effect on citrus green mold

Citrus has suffered great losses from postharvest fungal diseases. The strategy of polysaccharide-based coating combined with antimicrobial salts was introduced to preserve citrus and control green mold. Sodium silicate and ethylene diamine tetraacetic acid-2Na (EDTA-2Na) (SE) were incorporated with pullulan (PUL)/sodium alginate (SA) solutions to fabricate PSA-SE systems. The results indicated that the PSA-SE films had good biocompatibility based on hydrogen bonds and showed uniform and dense. The molecular of PUL and SA were assembled through entanglement to form a network structure and the surface roughness of the PSA-SE films increased with the addition of SA. The P3SA2-SE film indicated appropriate tensile strength and elongation at break, as well as the lowest water vapor permeability. The carbon dioxide and oxygen permeability and dissolution of P3SA2-SE film were at low values. The P3SA2-SE film had the highest water contact angle (66°). With the addition of SA, the absorbance of the PSA-SE films increased, which was conducive to light blocking. The antifungal experiments revealed that the P3SA2-SE coating showed a significant effect on controlling citrus green mold, especially in Citrus sinensis Osbeck ‘Lane Late’ almost completely inhibited Penicillium digitatum (P44). This study will promote the development of citrus postharvest disease control.

Development of fish gelatin film for anti-fogging mushroom packaging

Mushrooms are extremely perspiring and transpiring commodities. The commonly used plastic films for packaging fresh mushrooms have lower water vapour permeability compared to the rate at which mushrooms transpire, resulting in excessive moisture accumulation inside the package which leads to fogging. This study aimed to investigate the properties of a fish scale gelatin-based film and its correlation with antifogging properties. To produce the gelatin-based film, gelatin was extracted from fish scales using chemical pretreatment and thermal denaturation of collagen. A film-forming solution (FFS) was prepared by dissolving 2% (w/v) gelatin in a solvent, with the addition of glycerol. The solution was then cast to form the film, which underwent tests for mechanical strength, thermal behaviour, barrier properties, and antifogging performance. The resulting film (G-Gly) exhibited reduced tensile strength (13.21 MPa) but increased elongation at break (82.4%). Differential scanning calorimetry revealed a lower glass transition temperature (59.91 °C) for G-Gly. Both gelatin films displayed high water vapour permeability (1.69–3.09x10-6 g m/m2.day.Pa), preventing condensation. Notably, the G and G-Gly films remained fog-free even under varying temperatures, unlike linear low-density polyethylene film (LLDPE). In conclusion, the gelatin-based films demonstrated strong barrier properties and effective antifogging capabilities, making them suitable for moisture-sensitive commodities like mushrooms.

Self-powered sensors utilizing single-pillar thermocells with pyrolytic graphite sheet electrodes: harvesting body heat and solar thermal energy

This study investigates the development of self-powered sensors employing single-pillar thermocells to harness body heat and solar thermal energy. A pyrolytic graphite sheet was selected for its low water vapor permeability, and its surface was modified to be hydrophilic to minimize interfacial resistance. Two types of DC–DC converters, Asahi Kasei Microdevices AP4473 and matrix mercury, underwent evaluation for compatibility with these thermocells. The compact 1.5 cm3 (1 cm × 1 cm × 1.5 cm) device effectively powered the AP4473 converter, illuminating a light-emitting diode. A larger device (2.5 cm × 2.5 cm × 1.5 cm) efficiently drove the matrix mercury converter, enabling the operation of bluetooth low-power sensors. These self-powered sensors wirelessly provided humidity and temperature data using solar thermal energy for approximately 4 h per day during peak temperature differences in January. This study showcases the potential of thermocells for sustainable energy harvesting and suggests avenues for future research, such as exploring alternative heat sources like geothermal energy to power these sensors.

Anthocyanin modified by chondroitin sulphate and tannic acid improved the quality-indicating properties of gelatin-based intelligent film

A highly pH-responsive gelatin film incorporating purple cabbage anthocyanin (PCA) and chondroitin sulphate (CS)/tannic acid (TA) was developed. Co-pigmentation of PCA via CS/TA improved its photothermal stability and visibility of color change in gelatin film. The morphological and structural properties of CS-PCA and TA-PCA films revealed that a more stable network was formed as new hydrogen bonds were generated by the co-pigmentation. Meanwhile, the co-pigmentation improved film's mechanical and hydrophobic properties, expressed as higher tensile strength (16.65 and 17.97 Mpa) and lower water vapor permeability (1.45 and 1.41) in CS-PCA and TA-PCA films, compared to PCA film. CS-PCA and TA-PCA films showed distinct color transitions for chilled fish fillets during storage. Total color difference (ΔE) of CS-PCA and TA-PCA films correlated well with the deterioration indexes of total volatile base nitrogen (TVB-N). All the results provided a novel pH-sensitive intelligent packaging strategy by co-pigmenting CS/TA with PCA for freshness monitoring.

Plant-Based Films for Food Packaging as a Plastic Waste Management Alternative: Potato and Cassava Starch Case.

The escalating environmental impact of plastic packaging waste necessitates sustainable alternatives in food packaging. This study explores starch-based films derived from cassava and potato as viable substitutes, aiming to mitigate plastic pollution and enhance environmental sustainability. Utilizing a casting method, formulations optimized by CCRD were characterized for their physical, physicochemical, and morphological properties. Comprehensive analysis revealed both cassava and potato starch films to exhibit robust structural integrity, high tensile strength (up to 32.6 MPa for cassava starch films), and semi-crystalline morphology. These films demonstrated low water vapor permeability and moderate solubility, akin to conventional low-density polyethylene used in packaging. Differential scanning calorimetry indicated glass transition temperatures between 116.36 °C and 119.35 °C, affirming thermal stability suitable for packaging applications. Scanning electron microscopy confirmed homogeneous film surfaces, with cassava starch films (C4-15) exhibiting superior transparency and uniformity. X-ray diffraction corroborated the films' semi-crystalline nature, unaffected by sorbitol content variations. Despite their mechanical and thermal suitability, further enhancements in thermal degradation resistance are essential for broader thermoprocessing applicability. These findings underscore the potential of starch-based films to be used as lids or other part of a food package, decreasing the plastic dependency in food packaging, contributing decisively to waste reduction and environmental preservation.

Antimicrobial multi-crosslinking tamarind xyloglucan/protein-chitosan coating packaging films with self-recovery and biocompatible properties

Natural and high-quality biomass-based coating films are considered promising packaging to consumers. However, the poor mechanical properties and weak antimicrobial activity of biomass materials have limited their practical application. A cleaner and low-cost strategy is used to prepare antimicrobial, self-recovery, and biocompatible coating films using tamarind kernel powder (TKP) and chitosan (CS). The TKP protein and chitosan chains were covalently cross-linked with tetrakis(hydroxymethyl)phosphonium chloride (THPC) to form a three-dimensional network based on THPC-amine dynamic bonds, and act as a sacrificial bond. Then, the hydrogen bond forms an interpenetrating network to build a strong multi-network film. Thus, the THPC multi-crosslinking TKP based films showed enhanced stretchable property (increased from 3.23 % to 77.54 %), and self-recovery after 30 min of recovery. Additionally, the film has been found to exhibit low water vapor permeability, low oxygen transmittance rate, and excellent antimicrobial efficiency (maximum inhibition zones: 24.39 mm). Moreover, the prepared films were demonstrated to be biocompatible and non-hemolytic based on cell viability and hemolytic activity assays. The method described herein could broaden the scope of biomass-based materials in the realm of antimicrobial coating films.

A high-strength collagen-based antimicrobial film grafted with ε-polylysine fabrication by riboflavin-mediated ultraviolet irradiation for pork preservation

In this study, a UV-cured collagen-based film (C-P-H film) with high mechanical strength and antimicrobial properties was developed by riboflavin-mediated ultraviolet irradiation of collagen solution containing histidine-modified ε-polylysine. Fourier transform infrared analysis indicated that covalent cross-linking was formed between the collagen molecule and the histidine-grafted ε-polylysine. Compared with the pure collagen film, the C-P-H film containing 5 wt% histidine-modified ε-polylysine showed higher tensile strength (145.98 MPa), higher thermal denaturation temperature (76.5 °C), lower water vapor permeability (5.54 × 10−11 g m−1 s−1 Pa) and excellent antimicrobial activities against Escherichia coli and Staphylococcus aureus. In addition, the wrapping of the C-P-H film effectively inhibited bacterial growth of pork during storage time, successfully prolonging the shelf-life of pork by approximately 4 days compared to that of plastic wrap. These results suggested that collagen-based film grafted with histidine-modified ε-polylysine via riboflavin-mediated ultraviolet irradiation process had a great potential for pork preservation.

Development of Functional Composite Edible Films or Coatings for Fruits Preservation with Addition of Pomace Oil-Based Nanoemulsion for Enhanced Barrier Properties and Caffeine for Enhanced Antioxidant Activity.

The aim of this study was to develop functional composite edible films or coatings for fruit preservation by the addition of bioactive components in combinations that have not yet been thoroughly studied, according to the relevant literature. Edible films were initially composed of (i) chitosan (CH), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5% ratio), and (ii) hydroxypropyl methylcellulose (HPMC), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5% ratio). The bioactive components incorporated (5, 10 and 15% v/v) were as follows: (i) pomace oil-based nanoemulsion (NE) aiming to enhance barrier properties, and (ii) caffeine (C), aiming to enhance the antioxidant activity of films, respectively. Indeed, NE addition led to very high barrier properties (low oxygen and water vapor permeability), increased flexibility and reduced color. Furthermore, the contribution of these coatings to fresh strawberries' preservation under cold storage was investigated, with very promising results concerning weight loss, color difference, and preservation of fruit moisture and quantity of O2 and CO2 inside the packages. Additionally, C addition led to very high antioxidant activity, reduced color and improved barrier properties. Finally, the contribution of these coatings to avocado's preservation under cold storage was investigated, with very encouraging results for color difference, hardness and peroxide value of the fruit samples.

Effect of ultrasonically stimulated potato germination during soaking on the physicochemical properties of starch and its use in edible films

The aim of this work was to investigate the effects of ultrasonic treatment during soaking of potatoes on the physicochemical properties of starches obtained after 16 weeks of germination. The ultrasonic treatment showed a direct correlation between sprout length and ultrasonic time. The protein content decreased from 0.63 to 0.38 % and the fat content decreased significantly from 0.31 to 0.01 % after germination. The amylose content changed depending on the ultrasonic treatment, and increased from 36.27 to 40.92 % after 16 weeks of germination, which was related to the amylopectin debranching and the duration of the ultrasonic treatment. X-ray diffraction showed that the nanocrystals with hexagonal structure were not affected by the germination and the duration of ultrasonic treatment. Scanning electron microscopy showed that the surface of the starch granules was not affected by the enzymatic treatment.The sprouted potato starch resulted in films with better tensile strength and lower water vapor permeability (WVP) compared to the native potato starch films. In addition, the films produced with ultrasound stimulated potato starch exhibited better properties (high strength and low permeability), which is desirable when it comes to controlling moisture exchange between a food product and the surrounding atmosphere.

Preparation, characterization, and application of gallic acid-mediated photodynamic chitosan-nanocellulose-based films

In this study, an active film composed of gallic acid (GA), chitosan (CS), and cellulose nanocrystals (CNC) was prepared using a solution casting method and synergistic photodynamic inactivation (PDI) technology. Characterization of the film showed that the CS-CNC-GA composite film had high transparency and UV-blocking ability. The addition of GA (0.2 %–1.0 %) significantly enhanced the mechanical properties, water resistance, and thermal stability of the film. The tensile strength increased up to 46.30 MPa, and the lowest water vapor permeability was 1.16 × e−12 g/(cm·s·Pa). The PDI-treated CS-CNC-GA1.0 composite film exhibited significantly enhanced antibacterial activity, with inhibition zone diameters of 31.83 mm against Staphylococcus aureus and 21.82 mm against Escherichia coli. The CS-CNC-GA composite film also showed good antioxidant activity. Additionally, the CS-CNC-GA1.0 composite film generated a large amount of singlet oxygen under UV-C light irradiation. It was found that using the CS-CNC-GA1.0 composite film for packaging and storage of oysters at 4 °C effectively delayed the increase in pH, total colony count, and lipid oxidation in oysters. In conclusion, the CS-CNC-GA composite film based on PDI technology has great potential for applications in the preservation of aquatic products.

The Shelf Life of Yellow Passion Fruit with an Edible Biocomposite Coating Based on Chitosan, Graphene Oxide Nanoparticles, and Beeswax

Yellow or sour passion fruit is a climacteric fruit with a high rate of respiration and ethylene production, and postharvest technology is needed to extend its shelf life. This study investigated the properties of a biocomposite film with chitosan (CH) incorporated with beeswax (BW) and graphene oxide (GO) nanoparticles for use as an edible coating to extend the shelf life of yellow passion fruit at 22 °C and 70% RH for eight days. CH films associated with BW showed lower water vapor permeability (WVP) than films with CH alone. However, adding GO to the CH + BW biopolymer matrix improved the WVP, decreased the solubility (12.8%), and increased the opacity of the film by 9% compared to those of the CH film. Fruits coated with CH + BW or CH + BW + GO exhibited a reduction in respiration rate, a slower ripening process by approximately 3 days, and a significant decrease in weight loss. This also resulted in a higher soluble solids content and increased antioxidative capacity of the pulp. The incorporation of GO into the CH + BW matrix resulted in a more pronounced delay of fruit ripening, as evidenced by the lower depigmentation of the peel at eight days, with a lightness approximately 10.7% lower at 54.92, a chroma value 16.5% lower at 49.33, a hue angle 7.2% higher at 92.56, a soluble solid (SS) content 16.7% higher at 11.32°Brix, and an acidity 31.9% higher at 4.18% compared to the control. Furthermore, the biopolymer packaging led to a higher consumer acceptance score for the fruit.

Development of multifunctional chitosan-based composite film loaded with tea polyphenol nanoparticles for strawberry preservation

Incorporating polysaccharide-based composite films with nanobiotechnology offers a new strategy for food preservation. This study initially focuses on the preparation of tea polyphenol nanoparticles (TPNP), novel and derived from natural antibacterial agents, which serve to improve stability. Afterwards chitosan-based composite films loaded with TPNP (CTN film) were developed using solution casting method. The incorporation of TPNP significantly improved the UV/water/oxygen barrier properties, mechanical properties and thermal stability, alongside notable physical properties including water contact angle (93.65 ± 0.04°), low water vapor permeability (33.72 ± 3.32 g/m2h) and oxygen permeability (0.11 ± 0.02 g/m2h), tensile strength (61.83 ± 0.70 %), and elongation at break (31.60 ± 6.12 %). The CTN film not only exhibited exceptional biodegradability and nontoxicity, but also demonstrated remarkable antimicrobial efficacy against Escherichia coli and Bacillus subtilis. Additionally, it showcased potent antioxidant activity, boasting DPPH and ABTS radical scavenging rates up to 89.25 ± 0.18 % and 93.84 ± 0.42 %. The CTN film was successfully formed on the surface of strawberries through dip-coating process and their shelf life was extended from 4 to 6 days at 20 °C without side-effect on the weight loss, harness, pH and total soluble solids, illustrating its potential for enhancing food preservation.

Effect of Ultrasound and Freeze‐Drying to Enhance the Extraction of Phenolic Compounds in Dragon Fruit Peels and Apply Them in Edible Starch‐Based Films

ABSTRACTIn this study, dragon fruit peels were subjected to different times (5, 10, 15, 20 and 25 min) of ultrasound pretreatment (4.870 W m−2/25°C) and then freeze‐drying (FD) (−56°C/48 h) to obtain powder particles, which underwent physical–chemical, functional and structural characterisation. Additionally, the extraction of total phenolic compound (TPC) was evaluated through ultrasound‐assisted kinetics and mechanical agitation. Finally, films based on black rice starch were developed with the addition (0.5, 1.5 and 2.5%) of dragon fruit peel powder particles, and their physical, barrier, antioxidant, structural and mechanical properties were evaluated. The results obtained showed that all particles had low water content (4.21%–6.58%) and high solubility (84.62%–88.73%) with a reduction in particle size (23.21–39.32 μm). In the extraction of TPC, the synergistic effect of the tested conditions increased efficiency, reaching 686.66 mg GAE/100 g for pretreated dragon fruit peel powder particles (25 min) in 180 min of extraction. Furthermore, the type ‘A’ crystallinity structure did not change significantly with pretreatment, but there was a reduction in peak area, reflecting on relative crystallinity, with a maximum decrease of 29.04%. The starch‐based films produced with 2.5% dragon fruit peel powder particles showed low solubility (28.72%) and low water vapour permeability (5.03 × 10−8 g mm s−1 m2 Pa), however, they contained higher levels of TPC (31.78 mg GAE/100 g film) and antioxidant activity (8.17 μmol TE/g film) that were easily migrated in aqueous medium. Furthermore, they also presented low values of tensile strength at break (3.41 MPa) and Young's modulus (4.18 MPa), as well as a high value of elongation at break (45.82%). Finally, our results highlight the potential of ultrasound as a pretreatment for FD of dragon fruit peels, paving the way for the development of rice starch‐based food packaging.