Low Temperature Conditions Research Articles

Water Impact Dynamics and Mechanism Analysis of Polypropylene and Polypropylene/poly(ethylene-co-octene) Replica Surfaces with Nanowires under Low Temperature Conditions.

In this work, polypropylene (PP) and PP/poly(ethylene-co-octene) (PP/POE) blend replica surfaces with densely arranged nanowires are fabricated using a molding process. Morphology analysis shows that the nanowires on these replica surfaces have sharp tips and high aspect ratios. The droplet impact behaviors on the surfaces of the PP/POE blend replicas and PP replicas are investigated before and after freezing at -20 °C for 4 h. The height of the nanowires on the PP/POE blend replica surfaces is higher than that on the PP surface before and after freezing. The static wettability and droplet impact tests on the surfaces of PP/POE blend replicas and PP replica show that adding POE into the PP matrix can significantly increase the toughness of the nanowires on the PP/POE blend replica surfaces during the droplet impact at low temperatures. These investigations are favorable to broaden the practical applications of superhydrophobic surfaces in some severe environments.

Pt-Cu/CeO2-Al2O3 with Honeycomb-Like Structure Towards Catalytic Cracking of RP-3 and Anti-Wear Application

ABSTRACT Generally, thermal barrier and wear seriously affect flight safety by deforming or disabling the inner surface of the engine and outer surface of the vehicle of supersonic aircraft. In this study, we developed a bimetallic supported composite catalyst coating which can simultaneously eliminate the “thermal barriers” and improve the wear resistance. The bimetal-loaded composite catalysts (Pt-Cu@CeO2-Al2O3) coating was obtained by co-precipitation method. The catalytic cracking for RP-3 and wear resistance of composite catalyst coatings were evaluated via thermal cracking and friction experiments. The simulated catalytic cracking experiment results show that when n(Ce): n(Al) = 1:1, the composite catalyst exhibits the highest catalytic activity, which results from the largest specific surface area and proportion of strong acid centers. Meanwhile, under lower temperature conditions, the gas production rate of RP-3 catalytic cracking is increased by 915% (550 ℃) and 186% (600 ℃) compared with the thermal cracking. Meanwhile, the low frictional coefficient of 0.533 of the catalyst coating also indicates the satisfied wear resistance. This research provides useful information for the creation of a safer flying environment and the extension of the service life of supersonic aircraft.

Enhancing Stability of SAPO-37 Molecular Sieve through Aluminum Phosphate Utilization: Synthesis, Stability Mechanism, and Catalytic Performance.

SAPO-37 molecular sieve, characterized by its three-dimensional 12-membered-ring FAU structure, has drawn wide attention due to its unique properties and catalytic potential. However, its susceptibility to framework collapse under low-temperature and humid conditions hinders practical applications, affecting both the reaction performance and sample storage. To tackle this, we utilized aluminum phosphate as a precursor for synthesizing SAPO-37, aiming to modify Si incorporation mechanisms and improve P and Al environments. Solid NMR spectroscopy combined with other techniques proves that the resulting SAPO-37-AP has enriched silicon islands, leading to reduced water adsorption, more reversible structural change, and significantly enhanced stability after low-temperature vapor treatment compared to conventional SAPO-37. Remarkably, SAPO-37-AP, after water vapor treatment, still exhibits superior performance in the liquid-phase Beckmann rearrangement reaction. This approach enhances stability, reduces templating agent amounts, and improves the solid product yield, offering promising practical applications.

Propane dehydrogenation catalysis of group IIIB and IVB metal hydrides.

Catalytic propane dehydrogenation (PDH) has mainly been studied using metal- and metal oxide-based catalysts. Studies on dehydrogenation catalysis by metal hydrides, however, have rarely been reported. In this study, PDH reactions using group IIIB and IVB metal hydride catalysts were investigated under relatively low-temperature conditions of 450 °C. Lanthanum hydride exhibited the lowest activation energy for dehydrogenation and the highest propylene yield. Based on kinetics studies, a comparison between the reported calculation results and isotope experiments, the hydrogen vacancies of metal hydrides were involved in low-temperature PDH reactions.

AtDREB2G is involved in the regulation of riboflavin biosynthesis in response to low-temperature stress and abscisic acid treatment in Arabidopsis thaliana

Riboflavin (RF) serves as a precursor to flavin mononucleotide and flavin adenine dinucleotide, which are crucial cofactors in various metabolic processes. Strict regulation of cellular flavin homeostasis is imperative, yet information regarding the factors governing this regulation remains largely elusive. In this study, we first examined the impact of external flavin treatment on the Arabidopsis transcriptome to identify novel regulators of cellular flavin levels. Our analysis revealed alterations in the expression of 49 putative transcription factors. Subsequent reverse genetic screening highlighted a member of the dehydration-responsive element binding (DREB) family, AtDREB2G, as a potential regulator of cellular flavin levels. Knockout mutants of AtDREB2G (dreb2g) exhibited reduced flavin levels and decreased expression of RF biosynthetic genes compared to wild-type plants. Conversely, conditional overexpression of AtDREB2G led to an increase in the expression of RF biosynthetic genes and elevated flavin levels. In wild-type plants, exposure to low temperatures and abscisic acid treatment stimulated enhanced flavin levels and upregulated the expression of RF biosynthetic genes, concomitant with the induction of AtDREB2G. Notably, these responses were significantly attenuated in dreb2g mutants. Our findings establish AtDREB2G is involved in the positive regulation of flavin biosynthesis in Arabidopsis, particularly under conditions of low temperature and abscisic acid treatment.

Harnessing Nuclear Magnetic Resonance Spectroscopy to Decipher Structure and Dynamics of Clathrate Hydrates in Confinement: A Perspective.

This perspective outlines recent developments in the field of NMR spectroscopy, enabling new opportunities for in situ studies on bulk and confined clathrate hydrates. These hydrates are crystalline ice-like materials, built up from hydrogen-bonded water molecules, forming cages occluding non-polar gaseous guest molecules, including CH4, CO2 and even H2 and He gas. In nature, they are found in low-temperature and high-pressure conditions. Synthetic confined versions hold immense potential for energy storage and transportation, as well as for carbon capture and storage. Using previous studies, this report highlights static and magic angle spinning NMR hardware and strategies enabling the study of clathrate hydrate formation in situ, in bulk and in nano-confinement. The information obtained from such studies includes phase identification, dynamics, gas exchange processes, mechanistic studies and the molecular-level elucidation of the interactions between water, guest molecules and confining interfaces.

Experimental study on the effect of PVP, NaCl and EG on the methane hydrates formation and dissociation kinetics

The problem of hydrate plug, low efficiency of hydrate dissociation and short production time in hydrate exploitation processes have significantly hindered the commercial viability of gas hydrate extraction. This study investigated the inhibitory effects of ethylene glycol (EG), EG + polyvinyl pyrrolidone (PVP), and EG + PVP + sodium chloride (NaCl) on methane hydrate formation through experiment. The hydrate inhibitory performance is evaluated by using differential of pressure curve, the amount of hydrate, and pressure drop values, and the effects of different temperatures, pressures, inhibitors, and injection time on hydrate dissociation are further studied. The experiment results indicate that the rank of inhibitors combination in terms of effectiveness is 5%EG + 0.5 wt%PVP + 3 wt%Nacl > 10%EG + 1 wt%PVP > 30% EG. At low-temperature conditions, 30% EG exhibits good inhibition of hydrate synthesis but poor dissociation efficiency. As temperature increases, the hydrates dissociation rate with 30% EG also increases. For the combination inhibitor system of EG, PVP, and NaCl, PVP will reduce the dissociation efficiency of hydrates, while EG and Nacl will improve the hydrate dissociation performance. For low production pressure, it is found that 10% EG + 10% NaCl have a good promotion effect on hydrate dissociation, whereas under high production pressure, 20% EG + 10% NaCl is more effective. Furthermore, injecting the inhibitors earlier enhances the dissociation of hydrates more effectively.

Genome-Wide Identification and Expression Analysis of ADK Gene Family Members in Cotton under Abiotic Stress.

Adenosine kinase (ADK) is a key enzyme widely distributed in plants, playing an important role in maintaining cellular energy homeostasis and regulating plant growth, development, and responses to environmental stresses. However, research on ADK genes in cotton (Gossypium hirsutum), an economically significant crop, has been limited. This study identified 92 ADK genes from four cotton species (G. arboreum, G. raimondii, G. hirsutum, and G. barbadense) using HMMER and Local BLASTP methods and classified them into six groups. Chromosomal localization revealed a random distribution of ADK genes in G. hirsutum, with 13 genes located on the At subgenome and 14 genes on the Dt subgenome. Gene structure analysis showed consistency in exon-intron organization within subgroups, while conserved motif analysis identified subgroup-specific motifs, indicating functional diversity. Synteny and collinearity mapping analysis revealed that the primary expansion mechanisms of the ADK gene family in cotton are polyploidy and segmental duplication. Cis-regulatory elements in GhADK promoters were classified into light response, hormone response, developmental regulation, and stress response. We also analyzed the expression patterns of GhADK genes under a low temperature (4 °C) and drought conditions. Most GhADK genes responded to cold stress with different expression patterns, indicating their roles in rapid response and long-term cold adaptation. Under drought stress, expression patterns varied, with some genes showing sustained high expression levels. The qRT-PCR validation of transcriptomic data confirmed the stress-induced expression patterns of selected GhADK genes. Functional analysis through the VIGS silencing of GhADK25 demonstrated its importance in cold and drought stress responses, with silencing resulting in poor growth under stress, highlighting its significance in stress tolerance. This study provides a basis for further understanding the evolutionary relationships and functions of the cotton ADK gene family.

Parabacteroides distasonis regulates the infectivity and pathogenicity of SVCV at different water temperatures

BackgroundSpring viremia of carp virus (SVCV) infects a wide range of fish species and causes high mortality rates in aquaculture. This viral infection is characterized by seasonal outbreaks that are temperature-dependent. However, the specific mechanism behind temperature-dependent SVCV infectivity and pathogenicity remains unclear. Given the high sensitivity of the composition of intestinal microbiota to temperature changes, it would be interesting to investigate if the intestinal microbiota of fish could play a role in modulating the infectivity of SVCV at different temperatures.ResultsOur study found that significantly higher infectivity and pathogenicity of SVCV infection in zebrafish occurred at relatively lower temperature. Comparative analysis of the intestinal microbiota in zebrafish exposed to high- and low-temperature conditions revealed that temperature influenced the abundance and diversity of the intestinal microbiota in zebrafish. A significantly higher abundance of Parabacteroides distasonis and its metabolite secondary bile acid (deoxycholic acid, DCA) was detected in the intestine of zebrafish exposed to high temperature. Both colonization of Parabacteroides distasonis and feeding of DCA to zebrafish at low temperature significantly reduced the mortality caused by SVCV. An in vitro assay demonstrated that DCA could inhibit the assembly and release of SVCV. Notably, DCA also showed an inhibitory effect on the infectious hematopoietic necrosis virus, another Rhabdoviridae member known to be more infectious at low temperature.ConclusionsThis study provides evidence that temperature can be an important factor to influence the composition of intestinal microbiota in zebrafish, consequently impacting the infectivity and pathogenicity of SVCV. The findings highlight the enrichment of Parabacteroides distasonis and its derivative, DCA, in the intestines of zebrafish raised at high temperature, and they possess an important role in preventing the infection of SVCV and other Rhabdoviridae members in host fish.5bE3maafB13tm5XCByKxuZVideo

High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions.

Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.

Potential Application of the Myocardial Scintigraphy Agent [123I]BMIPP in Colon Cancer Cell Imaging.

[123I]β-methyl-p-iodophenyl-pentadecanoic acid ([123I]BMIPP), which is used for nuclear medicine imaging of myocardial fatty acid metabolism, accumulates in cancer cells. However, the mechanism of accumulation remains unknown. Therefore, this study aimed to elucidate the accumulation and accumulation mechanism of [123I]BMIPP in cancer cells. We compared the accumulation of [123I]BMIPP in cancer cells with that of [18F]FDG and found that [123I]BMIPP was a much higher accumulation than [18F]FDG. The accumulation of [123I]BMIPP was evaluated in the presence of sulfosuccinimidyl oleate (SSO), a CD36 inhibitor, and lipofermata, a fatty acid transport protein (FATP) inhibitor, under low-temperature conditions and in the presence of etomoxir, a carnitine palmitoyl transferase I (CPT1) inhibitor. The results showed that [123I]BMIPP accumulation was decreased in the presence of SSO and lipofermata in H441, LS180, and DLD-1 cells, suggesting that FATPs and CD36 are involved in [123I]BMIPP uptake in cancer cells. [123I]BMIPP accumulation in all cancer cell lines was significantly decreased at 4 °C compared to that at 37 °C and increased in the presence of etomoxir in all cancer cell lines, suggesting that the accumulation of [123I]BMIPP in cancer cells is metabolically dependent. In a biological distribution study conducted using tumor-bearing mice transplanted with LS180 cells, [123I]BMIPP highly accumulated in not only LS180 cells but also normal tissues and organs (including blood and muscle). The tumor-to-intestine or large intestine ratios of [123I]BMIPP were similar to those of [18F]FDG, and the tumor-to-large-intestine ratios exceeded 1.0 during 30 min after [123I]BMIPP administration in the in vivo study. [123I]BMIPP is taken up by cancer cells via CD36 and FATP and incorporated into mitochondria via CPT1. Therefore, [123I]BMIPP may be useful for imaging cancers with activated fatty acid metabolism, such as colon cancer. However, the development of novel imaging radiotracers based on the chemical structure analog of [123I]BMIPP is needed.

Sulfadiazine degradation by Bjerkandera adusta DH0817 at low temperatures and its cold-adaptation mechanisms

The prolonged period of low temperatures in northern China poses a significant challenge to the bioremediation of antibiotic pollution. This study reports that a white-rot fungus Bjerkandera adusta DH0817, isolated from a poultry farm in Liaoning Province, can remove 60 % of SDZ within 20 days at 10°C and reduce the biotoxicity of SDZ. Six degradation pathways were proposed. SDZ biodegradation was primarily driven by cytochrome P450. Transcriptome analysis revealed that DH0817 upregulated genes associated with cell membrane, transcription factors and soluble sugars in response to low temperatures. Subsequently, genes associated with fatty acid, proteins and enzymes were upregulated to remove SDZ at low temperatures. This study provides valuable microbial resources and serves as a theoretical reference for addressing antibiotic pollution in livestock and poultry farms under low temperature conditions.

Revolutionizing multifunctional electrolyte additive design and synthesis for high-voltage nickel-rich batteries in diverse climates

The high-voltage LiNi0.6Co0.2Mn0.2O2 (NCM622) cathode presents a promising avenue for advancing the energy density of lithium-ion batteries. Nevertheless, current limitations primarily arise from electrolyte systems unable to meet stringent criteria, including stable performance under elevated temperatures and efficient discharge at low temperatures. In this study, we address these challenges by designing a molecular structure incorporating boron oxygen functional groups, phenyl-, and fluorine moieties to simultaneously enhance ion conductivity and thermal stability under extreme voltages. A multifunctional electrolyte additive, 3, 4, 5-trifluorophenylboronic anhydride (TFPBA), has been successfully developed via synthesis. TFPBA plays a pivotal role in promoting the formation of a hierarchical cathode electrolyte interphase (CEI) through its preferential decomposition and oxidation processes. This CEI features a mechanically stable inner layer enriched with fluorophenyl- groups, crucial for high-temperature cycling, alongside an outer layer concentrated with BxOyFz complexes that significantly improve Li+ conductivity, ensuring superior performance under low-temperature conditions and at elevated rates. Moreover, TFPBA acts as an HF scavenger within the electrolyte, mitigating corrosive effects on the cathode surface, thereby curtailing CEI reformation and the transition metal dissolution. The Li/NCM622 half cells with TFPBA exhibit impressive capacity retention rates of 92.58%, 80.09%, and 81.77% after extensive cycling at temperatures of −20 °C, 25 °C, and 55 °C, respectively. Moreover, NCM622/graphite full cells with TFPBA achieve a remarkable capacity retention of 97.97% after 150 cycles at room temperature. Our findings highlight the exceptional electrochemical performance of NCM622 cathodes at elevated voltages across a wide temperature range, providing valuable insights for the development of advanced electrolytes in high-demand applications.

A complete environmental wind tunnel for studying the evolution of snow accumulations under the effects of wind, rain, and heat

Given the escalating frequency of extreme cold weather worldwide, snow-induced building failures have increased substantially, especially in large-span space structures. The reason for engineering accidents lies in a lack of understanding of the intricate process of the mechanism of full-period evolution of snow “accumulation-melt-crystallization- accumulation” under the coupling actions of wind, rain, and heat. It is significant to develop a comprehensive and accurate environmental wind tunnel for conducting snow-relevant experiments under the multi-factors, which are barely studied. Hence, this paper proposes and establishes an experimental system called “Simulator of Natural Action of Wind-Rain-Heat-Snow for Space Structures (SNOW).” The system consists of an atmospheric boundary layer cryogenic wind tunnel subsystem, snowfall simulation subsystem, rain simulation subsystem, solar and building heating simulation subsystem, and high-precision multi-task monitoring and control subsystem. The facility can provide a 0–20 m/s stable wind field, −15 °C–0 °C low-temperature conditions, and a 2 m × 2 m experimental section. The calibrations of each subsystem were conducted in SNOW to ensure each component can successfully provide basic conditions for snow-relevant experiments. The SNOW can accurately simulate the entire process of natural snowfall and snow evolution under the coupling effects of wind, rain, and heat.

Unveiling the translational dynamics of lychee (Litchi chinesis Sonn.) in response to cold stress

Cold stress poses a significant threat to the quality and productivity of lychee (Litchi chinensis Sonn.). While previous research has extensively explored the genomic and transcriptomic responses to cold stress in lychee, the translatome has not been thoroughly investigated. This study delves into the translatomic landscape of the 'Xiangjinfeng' cultivar under both control and low-temperature conditions using RNA sequencing and ribosome profiling. We uncovered a significant divergence between the transcriptomic and translatomic responses to cold exposure. Additionally, bioinformatics analyses underscored the crucial role of codon occupancy in lychee's cold tolerance mechanisms. Our findings reveal that the modulation of translation via codon occupancy is a vital strategy to abiotic stress. Specifically, the study identifies ribosome stalling, particularly at the E site AAU codon, as a key element of the translation machinery in lychee's response to cold stress. This work enhances our understanding of the molecular dynamics of lychee's reaction to cold stress and emphasizes the essential role of translational regulation in the plant's environmental adaptability.

Influence of Temperature and LED Light Spectra on Flavonoid Contents in Poa pratensis

Light and temperature are the driving forces in plant development and growth. Specific photoreceptors provide the ability to sense and interpret light and temperature to regulate growth. Under the limited light conditions in most sports stadiums, natural grasses suffer from light deficiency. Artificial light provided by light-emitting diodes (LEDs) is used to increase their growth and adjust their development. Flavonoids like flavonols and anthocyanins are influenced by light conditions and temperature. Increased blue light can elevate the content of these secondary metabolites. Remote measurements of internal parameters using non-destructive methods provided information on their content under different temperature conditions for quality monitoring. This experiment tested flavonoid contents in Kentucky bluegrass (Poa pratensis) for different blue-to-red light ratios (0.6 and 0.4) and three temperature courses (constant temperature of 4 °C, constant temperature of 12 °C, and temperature switching among 12–8–4–8–12 °C). The results show elevated levels of flavonoids under blue-dominant artificial light as well as increased content under low-temperature (4 °C) conditions. The lack of flavonoids at elevated temperatures (12 °C), especially under red-dominant light, suggests an increased requirement for artificial blue light at increased temperatures. Non-destructive flavonoid determination was suitable for this experiment and can therefore be used for practical sports turf quality monitoring.

Study of the influence of temperature and duration of chlorinating roasting on the extraction of gold from E-waste

In this work, based on experimental studies, the effect of roasting temperature and duration on the chlorination of gold from E-waste under low-temperature conditions was studied. It has been established that in the low-temperature range of 150-300 °C, the gold content in the residue shows a sharp decrease, reaching its minimum of 8 ppm at 250 °C. A further increase in temperature does not affect the gold content in the cinder. It has been shown that during chlorinating roasting above a temperature of 250 °C, side reactions should be expected to occur with the formation of additional phases representing chlorides of copper, iron and other elements. The results of SEM and XRD analyzes of the solid phase obtained after chlorinating roasting at a temperature of 250 °C and a roasting duration of 20 minutes showed the presence of copper and iron chlorides in them. Optimal technological parameters and modes of the process of chlorinating roasting of E-waste with gaseous chlorine have been established: temperature – 250 °С; roasting duration – 20 minutes; chlorine consumption is 1.5 times more than the stoichiometrically required amount (SRA) for gold chlorination. Under optimal roasting conditions, a high, up to ~97.6%, recovery of gold in the form of gold chloride (AuCl3) was achieved. The results of the experiments can be a basic basis and make it possible to conduct more representative experiments (scaling) in the future, taking into account the established optimal technological parameters. This will provide a chance to evaluate the possibility of extracting gold from E-waste of different types and compositions and to conduct further research on obtaining pure gold from the collected representative amount of gold sublimate AuCl3 by smelting.

Light-induced, room-temperature hydrogen gas detection based on SnO2 quantum Dots/p-Si

The continuous monitoring of the hydrogen gas level under low-temperature conditions is vital to prevent explosive accidents. Metal oxide-based chemoresistors have attracted significant attention owing to their excellent gas sensitivity. However, high operating temperature required to remove adsorbed oxygen species is still considered as an obstacle, limiting the application of the system. In addressing the temperature issue, this study introduced an approach in which a gas interaction layer was separated from the signal-sensing region. The proposed two-terminal device comprises a gas interaction layer of SnO2 quantum dots (QDs) and a p-doped silicon (p-Si) region characterized by high electronic conductivity and light sensitivity. Through visible light illumination, the recombination between gas interaction-induced electrons and photo-generated holes induces a change in output photocurrent, enabling room-temperature gas sensing without additional temperature control. Using this gas sensing scheme, the proposed sensor showed impressive gas detection performance in the low-temperature range, achieving a detection range of a few parts per million (ppm) in concentration (limit of detection range: 9.46–50 ppm).

Recent advances and prospects of constructed wetlands in cold climates: a review from 2013 to 2023.

Constructed wetland (CW), a promising, environmentally responsible, and effective green ecological treatment technology, is actively involved in the treatment of various forms of wastewater. Low temperatures will, however, lead to issues including plant dormancy, decreased microbial activity, and ice formation in CWs, which will influence how well CWs process wastewater. Applying CWs successfully and continuously in cold areas is extremely difficult. Therefore, it is crucial to find solutions for the pressing issue of increasing the CWs' ability to process wastewater at low temperatures. This review focuses on the effect of cold climate on CWs (plants, substrates, microorganisms, removal effect of pollutants). It meticulously outlines current strategies to enhance CWs' performance under low-temperature conditions, including modifications for the improvement and optimization of the internal components (i.e., plant and substrate selection, bio-augmentation) and enhancement of the external operation conditions of CWs (such as process combination, effluent recirculation, aeration, heat preservation, and operation parameter optimization). Finally, future perspectives on potential research directions and technological innovations that could strengthen CWs' performance in cold climates are prospected. This review aims to contribute valuable insights into the operation strategies, widespread implementation, and subsequent study of CWs in colder climate regions.

Mechanistic Study on the Influence of Wax on Hydrate Formation Process.

To manage the interactions between wax and hydrate formation, a comprehensive understanding of the system's thermodynamics and flow characteristics is essential. Wax and hydrates coexist under low-temperature and high-pressure conditions, mutually influencing each other both thermodynamically and kinetically. This study focused on two main aspects: how wax affects the rate of hydrate formation in the oil-water system and how hydrate formation influences the thermodynamics of wax crystal precipitation. The presence of wax decreased the rate of hydrate formation, especially at higher wax contents. In systems with high wax content, over 70% of wax precipitated before hydrate formation, leading to less precipitation within the hydrate formation temperature range. With low water content, there were more nucleation sites for wax crystals in the oil phase, resulting in a greater difference in precipitation rates among different wax contents. For water content greater than 10%, the differences in precipitation rates were less significant, indicating a diminished effect of water content on wax crystal precipitation rates. Hydrates' hydrophilic nature had a limited impact on wax crystal nucleation and growth. Generally, wax crystals precipitate before hydrate formation, necessitating control measures for wax deposition during production processes.