When using the Electrometer as a wattmeter it is necessary (in order to secure accuracy) that the voltage impressed upon the quadrants shall not be less than a certain minimum depending upon the voltage to be impressed upon the moving system. When the latter voltage is of the order 10,000, the quadrants require a voltage larger than can economically be provided by a shunt. One is led, therefore, to consider intensifying devices. The or transformer, whose secondary winding is closed on a non-inductive resistance, can be used to give fairly good results, but it is not accurate at all frequencies and is dependent upon wave form. The author's quadrature transformer is a very simple piece of apparatus which can be relied upon to give for electrostatic wattmeters an electromotive force which is strictly the differential of the current in the primary winding. When so used it is necessary, for accuracy, at all frequencies and on all wave forms, that the integral of the mains voltage shall be impressed upon the moving system, although for sine curves only the differential need be impressed instead of the integral. The best device to impress on the quadrants a suitable voltage in phase with the currents is a generator with an air-cored magnetic circuit as described in the Paper. The mains current is passed through the field coil of the generator and produces a magnetic field proportional to the current; the armature is driven at known speed in this field, and is provided with a commutator and brushes. The brushes when set accurately have a voltage between them proportional to, and having the same wave form as, the mains current. Another device depending upon the charging of condensers in parallel and the placing of them in series has also been used for multiplying a small voltage produced by the passage of the mains current through a low-resistance shunt.