Low pKa Values Research Articles

Unlocking the Potential of Push-Pull Pyridinic Photobases: Aggregation-Induced Excited-State Proton Transfer.

The pH effect on the photophysics of three push-pull compounds bearing dimethoxytriphenylamine (TPA-OMe) as electron donor and pyridine as electron acceptor, with different ortho-functionalization (-H, -Br, -TPA-OMe), is assessed through steady-state and time-resolved spectroscopic techniques in DMSO/water mixed solutions and in water dispersions over a wide pH range. The enhanced intramolecular charge transfer upon protonation of the pyridineleads to the acidochromic (from colorless to yellow) and acido(fluoro)chromic (from cyan to pink) behaviours of the investigated compounds. In dilute DMSO/buffer mixtures these molecules exhibited low pKa values (≤ 3.5) and short singlet lifetimes. Nevertheless, it is by exploiting the aggregation phenomenon in aqueous environment that the practical use of these compounds largely expands: i) the basicity increases (pKa ≈ 4.5) approaching the optimum values for pH-sensing in cancer cell recognition; ii) the fluorescence efficiencies are boosted due to Aggregation-Induced Emission (AIE), making these compounds appealing as fluorescent probes; iii) longer singlet lifetimes enable Excited-State Proton Transfer, paving the way for the application of these molecules as photobases (pKa* = 9.1). The synergy of charge and proton transfers combined to the AIE behaviour in these pyridines allows tunable multi-responsive optical properties providing valuable information for the design of new light-emitting photobases.

Heterocyclic effect boosted peroxidase-like activity of MIL(Fe) metal-organic framework for colorimetric assay and dye removal

Metal-organic frameworks (MOFs) have emerged as promising candidates for enzyme mimics due to their abundant pore structures and adjustable active sites. The catalytic activity particularly depends on the electronic character of the organic ligand. In this study, we report an iron-based MOF nanozyme FeTDC, created by replacing the 1,4-dicarboxybenzene ligand with five-membered 2,5-thiophenedicarboxylic acid (H2TDC). In comparison with the phenyl analogue, the sulfur-based heterocyclic ligand demonstrates high electron delocalization, and a low pKa value, which are beneficial for enhancing the metal/ligand interactions. Accordingly, FeTDC can facilitate the oxidation of the benzidine substrate in the presence of H2O2, thereby exhibiting remarkable peroxidase-like activity. The generation of hydroxyl radical (•OH) at the Fe active sites contributes to the catalytic process. Furthermore, the smartphone-assisted colorimetric assay of pyrophosphate was developed with high sensitivity, based on its inhibitory effect. When FeTDC was utilized for the removal of benzidine dye under high-salt condition, a 90 % of removal rate was achieved due to the synergistic effect of enzyme catalysis and physical adsorption. This work presents a novel perspective of heterocyclic effect on the design of MOF nanozymes, thereby expanding their applicability in the control of pollutants.

Salt-free neutral dyeing of cotton fiber with monochlorotriazine type reactive dyes

In this paper, we present the modification of cotton with glycidyltrimethylammonium chloride (GTA), demonstrating its capability not only for salt-free dye adsorption but also for achieving fixation reactions with monochlorotriazine-type reactive dyes under neutral conditions. The results of adsorption kinetics and isotherm experiments indicate that the adsorption of reactive dyes by modified cotton is chemisorption. Color-stripping experiments conducted on modified cotton dyed with different dyes revealed that GTA-modified cotton underwent fixation reactions with monochlorotriazine-type reactive dyes under neutral conditions. The reaction sites of modified cotton with reactive dyes were determined by measuring the 1H NMR of the model reaction products. Mechanism investigation using Density Functional Theory (DFT) on the fixation reaction revealed that the hydroxyl groups on the modification agent chain exhibit a lower pKa value and carry more negative charge, resulting in a lower reaction barrier with monochlorotriazine-type reactive dyes. Our research findings demonstrate that GTA-modified cotton fiber enhance the reactivity of cotton, providing significant guidance for the development of novel modifiers.

Proton Conduction via Water and Ammonia Coordinated Metal Cationic Species in MOF and MHOF Platforms.

Although metal-organic frameworks (MOFs) and metalo hydrogen-bonded organic frameworks (MHOFs) are designed as promising solid-state proton conductors by incorporating various protonic species intrinsically or extrinsically, design and development of such materials by employing the concept of proton conduction through coordinated polar protic solvent is largely unexplored. Herein, we have constructed two proton-conducting materials having different solvent coordinated metal cationic species: In-H2O-MOF, ({[In(H2O)6][In3(Pzdc)6]·15H2O}n; H2Pzdc: pyrazine-2,3-dicarboxylic acid) with coordinated water molecules from hexaaquaindium cationic species, and MHOF-4, ([{Co(NH3)6}2(2,6-NDS)2(H2O)2]n; 2,6-H2NDS: 2,6-naphthalenedisulfonic acid) with coordinated ammonia from hexaammoniacobalt cationic species. Interestingly, higher proton conductivity was achieved for In-H2O-MOF (1.5 × 10-5 S cm-1) than MHOF-4 (6.3 × 10-6 S cm-1) under the extreme conditions (80 ºC and 95% RH), which could be attributed to enhanced acidity of coordinated water molecules having much lower pKa value than that of coordinated ammonia. Greater charge polarization on hydrogen atoms of In3+-coordinated water molecules than that of Co2+-coordinated ammonia led to the high conductivity of In-H2O-MOF, as evident by quantum chemical studies. Such a comparative study on metal-coordinated protic polar solvents in achieving proton conduction in crystalline solids is yet to be made.

Critical roles of soil composition and pollutant properties on the degradation of PPCPs during ferrous/persulfate processes

Pharmaceuticals and personal care products (PPCPs) are widely used worldwide and cause potential soil pollution. Fe2+-activated persulfate (PS) processes (Fe-PAPs) are promising techniques for soil remediation. However, a knowledge gap exists in the mechanistic insights into the dominant factors affecting the degradation of different PPCPs in varied soil types. This study systematically investigated the roles of soil components and pollutant properties in the degradation of three PPCPs (triclosan (TCS), triclocarban (TCC), and naproxen (NPS)) in the nine soils in the Fe2+/PS system. The degradation efficiencies of TCS and NPS ranged from 10.92 % to 91.62 % and 46.59 % to 99.81 %, respectively, whereas nearly no degradation was observed for TCC. PPCPs with high water solubility, high energies of the highest occupied molecular orbital (EHOMO), low pKa values, low energy gap (ΔE), or low vertical ionization potential (VIP) were more favorable for degradation. XPS analysis suggested that aliphatic carbon (Ali–C–C(H)), ether or alcohol carbon (C–O), and aldehyde or ketonic carbon (CO) on SOM significantly inhibited TCS degradation. The results of ROS quenching experiments showed that SO4•− and 1O2 played major roles in TCS and NPS degradation in the six soils, with the relative contributions ranged from 24.82 % to 99.14 % and 0.15 % to 73.40 %, respectively. The interaction between soil components, active species, and pollutants resulted in the distinct intermediates of TCS and NPS in different soils. Our findings provide in-depth insights into the role of soil composition and pollutant properties on the remediation of PPCP-contaminated soils in Fe-PAPs.

Photonic Nanochains for Continuous Glucose Monitoring in Physiological Environment.

Diabetes is a common disease that seriously endangers human health. Continuous glucose monitoring (CGM) is important for the prevention and treatment of diabetes. Glucose-sensing photonic nanochains (PNCs) have the advantages of naked-eye colorimetric readouts, short response time and noninvasive detection of diabetes, showing immense potential in CGM systems. However, the developed PNCs cannot disperse in physiological environment at the pH of 7.4 because of their poor hydrophilicity. In this study, we report a new kind of PNCs that can continuously and reversibly detect the concentration of glucose (Cg) in physiological environment at the pH of 7.4. Polyacrylic acid (PAA) added to the preparation of PNCs forms hydrogen bonds with polyvinylpyrrolidone (PVP) in Fe3O4@PVP colloidal nanoparticles and the hydrophilic monomer N-2-hydroxyethyl acrylamide (HEAAm), which increases the content of PHEAAm in the polymer shell of prepared PNCs. Moreover, 4-(2-acrylamidoethylcarbamoyl)-3-fluorophenylboronic acid (AFPBA), with a relatively low pKa value, is used as the glucose-sensing monomer to further improve the hydrophilicity and glucose-sensing performances of PNCs. The obtained Fe3O4@(PVP-PAA)@poly(AFPBA-co-HEAAm) PNCs disperse in artificial serum and change color from yellow-green to red when Cg increases from 3.9 mM to 11.4 mM, showing application potential for straightforward CGM.

Assessment of the antinociceptive, respiratory-depressant, and reinforcing effects of the low pKa fluorinated fentanyl analogs, FF3 and NFEPP

RationaleRecent studies report that fentanyl analogs with relatively low pKa values produce antinociception in rodents without other mu opioid-typical side effects due to the restriction of their activity to injured tissue with relatively low pH values. However, it is unclear if and to what degree these compounds may produce mu opioid-typical side effects (respiratory depression, reinforcing effects) at doses higher than those required to produce antinociception. ObjectivesThe present study compared the inflammatory antinociceptive, respiratory-depressant, and reinforcing effects of fentanyl and two analogs of intermediate (FF3) and low (NFEPP) pKa values in terms of potency and efficacy in male and female Sprague-Dawley rats. MethodsNociception was produced by administration of Complete Freund's Adjuvant into the hind paw of subjects, and antinociception was measured using an electronic Von Frey test. Respiratory depression was measured using whole-body plethysmography. Reinforcing effects were measured in self-administration using a progressive-ratio schedule of reinforcement. The dose ranges tested for each drug encompassed no effect to maximal effects. ResultsAll compounds produced full effects in all measures but varied in potency. FF3 and fentanyl were equipotent in antinociception and self-administration, but FF3 was less potent than fentanyl in respiratory depression. NFEPP was less potent than fentanyl in every measure. The magnitude of potency difference between antinociception and other effects was greater for FF3 than for NFEPP or fentanyl, indicating that FF3 had the widest margin of safety when relating antinociception to respiratory-depressant and reinforcing effects. ConclusionsLow pKa fentanyl analogs possess potential as safer analgesics, but determining the optimal degree of difference for pKa relative to fentanyl will require further study due to some differences between the current results and findings from prior work with these analogs.

Exploring the pH dependence of an improved PETase

Enzymatic recycling of plastic and especially of polyethylene terephthalate (PET) has shown great potential to reduce its negative impact on our society. PET hydrolases (PETases) have been optimized using rational design and machine learning, but the mechanistic details of the PET depolymerization process remain unclear. Belonging to the carboxylic-ester hydrolase family with a canonical Ser-His-Asp catalytic triad, their observed alkaline pH optimum is generally thought to be related to the protonation state of the catalytic His. Here, we explore this aspect in the context of LCCICCG, an optimized PETase, derived from the leaf-branch compost cutinase enzyme. We use NMR to identify the dominant tautomeric structure of the six histidines. Five show surprisingly low pKa values below 4.0, whereas the catalytic H242 in the active enzyme displays a pKa value that varies from 4.9 to 4.7 when temperatures increase from 30°C to 50°C. Whereas the hydrolytic activity of the enzyme toward a soluble substrate can be modeled by the corresponding protonation/deprotonation curve, an important discrepancy is found when the substrate is the solid plastic. This opens the way to further mechanistic understanding of the PETase activity and underscores the importance of studying the enzyme at the liquid-solid interface.

Variations in proton transfer pathways and energetics on pristine and defect-rich quartz surfaces in water: Insights into the bimodal acidities of quartz

HypothesisUnderstanding the mechanisms of proton transfer on quartz surfaces in water is critical for a range of processes in geochemical, environmental, and materials sciences. The wide range of surface acidities (>9 pKa units) found on the ubiquitous mineral quartz is caused by the structural variations of surface silanol groups. Molecular scale simulations provide essential tools for elucidating the origin of site-specific surface acidities. SimulationsWe used density-functional tight-binding-based molecular dynamics combined with rare-event metadynamics simulations to probe the mechanisms of deprotonation reactions from ten representative surface silanol groups found on both pristine and defect-rich quartz (101) surfaces with Si vacancies. FindingsThe results show that deprotonation is a highly dynamic process where both the surface hydroxyls and bridging oxygen atoms serve as the proton acceptors, in addition to water. Deprotonation of embedded silanols through intrasurface proton transfer exhibited lower pKa values with less H-bond participation and higher energy barriers, suggesting a new mechanism to explain the bimodal acidity observed on quartz surface. Defect sites, recently shown to comprise a significant portion of the quartz (101) surface, diversify the coordination and local H-bonding environments of the surface silanols, changing both the deprotonation pathways and energetics, leading to a wider range of pKa values (2.4 to 11.5) than that observed on pristine quartz surface (10.4 and 12.1).

β-Dicarbonyls Facilitate Engineered Microbial Bromoform Biosynthesis.

Ruminant livestock produce around 24% of global anthropogenic methane emissions. Methanogenesis in the animal rumen is significantly inhibited by bromoform, which is abundant in seaweeds of the genus Asparagopsis. This has prompted the development of livestock feed additives based on Asparagopsis to mitigate methane emissions, although this approach alone is unlikely to satisfy global demand. Here we engineer a non-native biosynthesis pathway to produce bromoform in vivo with yeast as an alternative biological source that may enable sustainable, scalable production of bromoform by fermentation. β-dicarbonyl compounds with low pKa values were identified as essential substrates for bromoform production and enabled bromoform synthesis in engineered Saccharomyces cerevisiae expressing a vanadate-dependent haloperoxidase gene. In addition to providing a potential route to the sustainable biological production of bromoform at scale, this work advances the development of novel microbial biosynthetic pathways for halogenation.

Multiple Roles of a Conserved Glutamate Residue for Unique Biophysical Properties in a New Group of Microbial Rhodopsins Homologous to TAT Rhodopsin

TAT rhodopsin, a microbial rhodopsin found in the marine SAR11 bacterium HIMB114, uniquely possesses a Thr–Ala–Thr (TAT) motif in the third transmembrane helix. Because of a low pKa value of the retinal Schiff base (RSB), TAT rhodopsin exhibits both a visible light-absorbing state with the protonated RSB and a UV-absorbing state with the deprotonated RSB at a neutral pH. The UV-absorbing state, in contrast to the visible light-absorbing one, converts to a long-lived photointermediate upon light absorption, implying that TAT rhodopsin functions as a pH-dependent light sensor. Despite detailed biophysical characterization and mechanistic studies on the TAT rhodopsin, it has been unknown whether other proteins with similarly unusual features exist. Here, we identified several new rhodopsin genes homologous to the TAT rhodopsin of HIMB114 (TATHIMB) from metagenomic data. Based on the absorption spectra of expressed proteins from these genes with visible and UV peaks similar to that of TATHIMB, they were classified as Twin-peaked Rhodopsin (TwR) family. TwR genes form a gene cluster with a set of 13 ORFs conserved in subclade IIIa of SAR11 bacteria. A glutamic acid in the second transmembrane helix, Glu54, is conserved in all of the TwRs. We investigated E54Q mutants of two TwRs and revealed that Glu54 plays critical roles in regulating the RSB pKa, oligomer formation, and the efficient photoreaction of the UV-absorbing state. The discovery of novel TwRs enables us to study the universality and individuality of the characteristics revealed so far in the original TATHIMB and contributes to further studies on mechanisms of unique properties of TwRs.

Apparent Cytotoxicity and Intrinsic Cytotoxicity of Lipid Nanomaterials Contained in a COVID-19 mRNA Vaccine

The medicinal preparation called Comirnaty by Pfizer-BioNTech is an aqueous dispersion of lipid nanomaterials, intended to constitute, after thawing and dilution, the finished product for intramuscular injection. In the present study, we examine some evident chemical-physical criticalities of the preparation, particularly regarding the apparent and the intrinsic pKa (acid dissociation constant) of its main excipient, the ionizable cationic lipid ALC-0315. The very high value of its intrinsic pKa causes, after internalization and endosomal escape of LNPs, a sudden increase of its cationic charge concentration and consequently the formation of pro-inflammatory cytokines and ROS (reactive oxygen species), that can disrupt the mitochondrial membrane and release its content, cause RNA mistranslation, polymerization of proteins and DNA, DNA mutations, destruction of the nuclear membrane and consequent release of its content. Additionally, the apparently low pKa value (6.09) of ALC-0315 associated with other lipids in the LNP, is not suitable for intramuscular application. Its value is too low to enable a proper transfection of host cells, despite what is stated by EMA (European Medicines Agency) in its Assessment report dated 19 February 2021, in flagrant contradiction with the same bibliographic source therein cited. Furthermore, the exceptional penetrability, mobility, chemical reactivity and systemic accumulation of uncontrollable cationic lipid nanoparticles, with high cytotoxicity levels, shed in unpredictable biological locations, even far from the site of inoculation, are all factors that can lead to an unprecedented medical disaster. Meanwhile, further immediate studies and verifications are recommended, taking into consideration, in accordance with the precautionary principle, the immediate suspension of vaccinations with the COVID-19 mRNA- LNP-based vaccines.

Infrared spectroscopy reveals the reactivity of fatty acids on copper surfaces and its implications for cultural heritage objects

The reactivities of various fatty monoacids and diacids on copper metal-containing surfaces were investigated through reflection–absorption infrared spectroscopy. The formation of copper carboxylates is detected on pure copper surfaces, while copper and zinc carboxylates are simultaneously formed on brass surfaces. Following the decrease of acid carbonyl and the formation of carboxylate infrared bands, it is shown that fatty monoacids C8 and C10 react with clean/polished copper and its zinc alloy within 2–4 h, while those with chains > C12 react within days. At the end of the processes, only the corresponding metal carboxylates are detected in all cases. An explanation for the above is offered on a molecular mobility and acidity basis, where the lower monoacids (liquids in room temperature), also having lower pKa values, favor higher reaction rates. Furthermore, it is argued that longer-chain fatty monoacids, when deposited from their solutions, allow for favorable orientation resulting in self-assembled monolayer-type molecular packing on the copper surface, which may additionally rationalize the slower reaction. Interestingly, fatty diacids do not form any carboxylate products under the same conditions, as it is argued that their molecules may efficiently pack as self-assembled multilayers on copper and ultimately protect it. The possible implications of the fatty monoacid and diacid behavior on the archaeological organic residues level and regarding the stability of copper alloys are discussed.

High-resolution crystal structure of the Mu8.1 conotoxin from Conus mucronatus.

Marine cone snails produce a wealth of peptide toxins (conotoxins) that bind their molecular targets with high selectivity and potency. Therefore, conotoxins constitute valuable biomolecular tools with a variety of biomedical purposes. The Mu8.1 conotoxin from Conus mucronatus is the founding member of the newly identified saposin-like conotoxin class of conotoxins and has been shown to target Cav2.3, a voltage-gated calcium channel. Two crystal structures have recently been determined of Mu8.1 at 2.3 and 2.1 Å resolution. Here, a high-resolution crystal structure of Mu8.1 was determined at 1.67 Å resolution in the high-symmetry space group I4122. The asymmetric unit contained one molecule, with a symmetry-related molecule generating a dimer equivalent to that observed in the two previously determined structures. The high resolution allows a detailed atomic analysis of a water-filled cavity buried at the dimer interface, revealing a tightly coordinated network of waters that shield a lysine residue (Lys55) with a predicted unusually low side-chain pKa value. These findings are discussed in terms of a potential functional role of Lys55 in target interaction.

Modulation of polymerization rate of N-carboxyanhydrides in a biphasic system

The recent advances in accelerated polymerization of N-carboxyanhydrides (NCAs) offer an effective strategy to simplify the preparation of polypeptide materials. However, the fine-tuning of polymerization kinetics, which is critical to differentiate the main polymerization and the side reactions, remains largely unexplored. Herein we report the modulation of polymerization rate of NCA in a water/oil biphasic system. By altering the aqueous pH, the initial location of the initiators, and the pKa of initiating amines, we observed the change in polymerization time from several minutes to a few hours. Due to the high interfacial activity and low pKa value, controlled polymerization was observed from multi-amine initiators even if they were initially located in the aqueous phase. This work not only improves our understanding on the biphasic polymerization mechanism, but also facilitates preparation of versatile polypeptide materials.

A highly selective NIR ratiometric fluorescent probe for in situ detection of metabolized hydrazine in living cells

Hydrazine (N2H4) is a great concern to human health and its detection in living cells is of growing importance. In this report, we employed a hydrogen bonding-anchored sensing strategy to develop a near-infrared (NIR) fluorescent probe CDM-1, which is capable of detecting N2H4 with ratiometric and colorimetric responses. The introduction of a chloro-substitution to the dicyanoisophorone scaffold improved the stability of the probe through Cl…CO n→π * interactions. Meanwhile, this substitution also provided a lower pKa value of the phenol CDM, allowing the generation of ratiometric changes after CDM-1 reacted with N2H4 under physiological conditions (pH = 7.4). Notably, we took advantage of utilizing both the hydrogen-bonding interaction and the 6-exo addition to target two anchors on N2H4 through “N” and “H” atoms, which enabled high selectivity and reactivity with a low limit of detection value at 0.3 ppb. CDM-1 has been successfully loaded onto paper strips to detect N2H4 vapor. Furthermore, the probe demonstrated its potential biological value in monitoring both the exogenous and endogenous N2H4, particularly as a metabolite of the anti-tuberculosis drug, Isoniazid (INH), in living cells.

Coarse-Grained MD Simulations of Opioid Interactions with the μ-Opioid Receptor and the Surrounding Lipid Membrane

In our previous studies, a new opioid (NFEPP) was developed to only selectively bind to the μ-opoid receptor (MOR) in inflamed tissue and thus avoid the severe side effects of fentanyl. We know that NFEPP has a reduced binding affinity to MOR in healthy tissue. Inspired by the modelling and simulations performed by Sutcliffe et al., we present our own results of coarse-grained molecular dynamics simulations of fentanyl and NFEPP with regards to their interaction with the μ-opioid receptor embedded within the lipid cell membrane. For technical reasons, we have slightly modified Sutcliffe’s parametrisation of opioids. The pH-dependent opioid simulations are of interest because while fentanyl is protonated at the physiological pH, NFEPP is deprotonated due to its lower pKa value than that of fentanyl. Here, we analyse for the first time whether pH changes have an effect on the dynamical behaviour of NFEPP when it is inside the cell membrane. Besides these changes, our analysis shows a possible alternative interaction of NFEPP at pH 7.4 outside the binding region of the MOR. The interaction potential of NFEPP with MOR is also depicted by analysing the provided statistical molecular dynamics simulations with the aid of an eigenvector analysis of a transition rate matrix. In our modelling, we see differences in the XY-diffusion profiles of NFEPP compared with fentanyl in the cell membrane.

Branched polyethylenimine-assisted boronic acid functionalized magnetic nanoparticles for highly efficient capture of lincomycin and clindamycin.

As lincosamide antibiotics, lincomycin and clindamycin are widely used in the drug manufacturing industry for the health of human beings and animals. Thus, the quantitative detection of them in real samples is of great significance. Due to the presence of complex interfering components in actual samples, the separation and enrichment of lincomycin and clindamycin prior to analysis are key. Therefore, it is necessary to develop a non-complex, cost-effective enrichment method for them. A five- or six-membered boronic cyclic ester is formed through boronate affinity materials binding a cis-diol-containing compound in aqueous media, which is a reversible reaction. However, low binding capacity and affinity, and high binding pH of boronate affinity materials are key concerns. In this study, polyethylenimine-assisted 3-fluoro-4-formylphenylboronic acid functionalized magnetic nanoparticles were developed to capture efficiently cis-diol-containing lincomycin and clindamycin under neutral conditions. Thereinto, polyethylenimine (PEI) was applied as a scaffold to amplify the number of boronic acid moieties. And 3-fluoro-4-formylphenylboronic acid was used as an affinity ligand due to its excellent water solubility and low pKa value toward lincomycin and clindamycin. The results indicated that the prepared branched boronic acid-functionalized MNPs provided high binding capacity and fast binding kinetics under neutral conditions. Furthermore, the obtained MNPs exhibited relatively high binding affinity (Kd ≈ 10-4 M) and low binding pH (pH ≥ 6.0).

Carbonic anhydrase mimics with rationally designed active sites for fine-tuned catalytic activity and selectivity in ester hydrolysis.

Numerous hydrolytic enzymes utilize zinc as a cofactor for catalysis. We here report water-soluble polymeric nanoparticles with zinc ions in active sites and a nearby base as a mimic of carbonic anhydrase (CA). Their pKa of 6.3-6.4 for zinc-bound water is lower than the 6.8-7.3 value for natural enzymes, which allows the catalyst to hydrolyze nonactivated alkyl esters under neutral conditions-a long sought-after goal for artificial esterases. The size and shape of the active site can be rationally tuned through a template used in molecular imprinting. Subtle structural changes in the template, including shifting an ethyl group by one C-N bond and removal of a methylene group, correlate directly with catalytic activity. A catalyst can be made to be highly specific or have broad substrate specificity through modular synthesis of templates.

Metal-Ion-Induced Evolution of Phenylalanine Self-Assembly: Structural Polymorphism of Novel Metastable Intermediates.

The self-assembly of aromatic amino acids has been widely studied due to their ability to form well-defined amyloid-like fibrillar structures. Herein, for the first time, we report the existence of different metastable intermediate states of diverse morphologies, for example, droplets, spheres, vesicles, flowers, and toroids, that are sequentially formed in aqueous medium during the self-assembly process of phenylalanine in the presence of different divalent (Zn2+, Cd2+, and Hg2+) and trivalent (Al3+, Ga3+, and In3+) metal ions having low pKa values. Due to metal ion-amino acid coordination and strong hydrophobic interaction induced by these metal ions, spherical aggregates are obtained at the initial stage of the structural evolution and further transformed into other intermediate states. Our work may facilitate understanding of the role of metal ions in the amino acid self-assembly process and broaden future applications of the obtained nanostructures in drug delivery, tissue engineering, bioimaging, biocatalysis, and other fields.