Low Molecular Weight Chitosan Research Articles

Synthesis of new quaternized chitosan Schiff bases and their N-alkyl derivatives as antimicrobial and anti-biofilm retardants in membrane technology

New quaternized salicylidene chitosan Schiff bases (QSCSBs) and their N-octyl derivatives (OQCs) have been synthesized and characterized, aiming to develop innovative antimicrobial and anti-biofilm agents. This research holds immense potential, as these compounds could be utilized as anti-biofouling additives in membrane technology in the future. The synthesis involved the modification of low molecular-weight-chitosan (LMC) through simultaneous Schiff base formation and quaternization processes to create QSCSBs. Subsequently, QSCSBs were catalytically reduced to form quaternized N-benzyl chitosan (QBCs) intermediates, which then underwent nucleophilic substitution reactions affording N-octyl quaternized chitosans (OQCs). Characterization techniques such as elemental, spectral, and microscopic analyses were used to confirm the successful synthesis of these materials. As membrane technology relies on surface charge, QSCSBs and OQCs with large zeta potentials could be used as positively charged additives. Moreover, SEM image revealed the regular distribution of pores and voids across the additives' surfaces raises intriguing questions about their implications for membrane performance. Meanwhile, the superior antibacterial and antibiofilm potential of these materials, particularly QSCSB2 and OQC2, indicate that the utilization of these compounds as anti-biofouling additives in membrane technology could significantly improve the performance and longevity of membranes used in various applications such as water treatment and desalination.

Low molecular weight chitosan from Pleurotus ostreatus waste and its prebiotic potential

The booming mushroom industry envisages economic merits, and massive unutilized waste production (∼ 20 %) creates an opportunity for valorization. Chitosan, a bioactive polysaccharide, has drawn immense attention for its invaluable therapeutic potential. Thus, the present study was conducted to extract chitosan from mushroom waste (MCH) for its prebiotic potential. The structural characterization of MCH was carried out using NMR, FTIR, and XRD. The CP/MAS-13CNMR spectrum of MCH appeared at δ 57.67 (C2), 61.19 (C6), 75.39 (C3/C5), 83.53 (C4), 105.13 (C1), 23.69 (CH3), and 174.19 (C = O) ppm. The FTIR showed characteristic peaks at 3361 cm−1, 1582 cm−1, and 1262 cm−1 attributed to –NH stretching, amide II, and amide III bands of MCH. XRD interpretation of MCH exhibited a single strong reflection at 2θ =20.19, which may correspond to the “form-II” polymorph. The extracted MCH (∼ 47 kDa) exhibited varying degrees of deacetylation from 79 to 84 %. The prebiotic activity score of 0.73 to 0.82 was observed for MCH (1 %) when supplemented with probiotic strains (Lactobacillus casei, L. helveticus, L. plantarum, and L. rhamnosus). MCH enhanced the growth of Lactobacillus strains and SCFA's levels, particularly in L. rhamnosus. The MCH also inhibited the growth of pathogenic strains (MIC of 0.125 and 0.25 mg/mL against E. coli and S. aureus, respectively) and enhanced the adhesion efficiency of probiotics (3 to 8 % at 1 % MCH supplementation). L. rhamnosus efficiency was higher against pathogens in the presence of MCH, as indicated by anti-adhesion assays. These findings suggested that extracted polysaccharides from mushroom waste can be used as a prebiotic for ameliorating intestinal dysbiosis.

Layer-by-layer assembly of quercetin-loaded zein/γPGA/low-molecular-weight chitosan/fucoidan nanosystem for targeting inflamed blood vessels

Chitosan acts as a versatile carrier in polymeric nanoparticle (NP) for diverse drug administration routes. Delivery of antioxidants, such as quercetin (Qu) showcases potent antioxidant and anti-inflammatory properties for reduction of various cardiovascular diseases, but low water solubility limits uptake. To address this, we developed a novel layer-by-layer zein/gamma-polyglutamic acid (γPGA)/low-molecular-weight chitosan (LC)/fucoidan NP for encapsulating Qu and targeting inflamed vessel endothelial cells. We used zein (Z) and γPGA (r) to encapsulate Qu (Qu-Zr NP) exhibited notably higher encapsulation efficiency compared to zein alone. Qu-Zr NP coated with LC (Qu-ZrLC2 NP) shows a lower particle size (193.2 ± 2.9 nm), and a higher zeta potential value (35.2 ± 0.4 mV) by zeta potential and transmission electron microscopy analysis. After coating Qu-ZrLC2 NP with fucoidan, Qu-ZrLC2Fa NP presented particle size (225.16 ± 0.92 nm), zeta potential (−25.66 ± 0.51 mV) and maintained antioxidant activity. Further analysis revealed that Qu-ZrLC2Fa NP were targeted and taken up by HUVEC cells and EA.hy926 endothelial cells. Notably, we observed Qu-ZrLC2Fa NP targeting zebrafish vessels and isoproterenol-induced inflamed vessels of rat. Our layer-by-layer formulated zein/γPGA/LC/fucoidan NP show promise as a targeted delivery system for water-insoluble drugs. Qu-ZrLC2Fa NP exhibit potential as an anti-inflammatory therapeutic for blood vessels.

X-ray structural study of membranes based on Na-CMC and CS-Cl for water purification

The level of environmental pollution is increasing year by year. Solving this problem requires the development and application of new effective technologies and materials for wastewater treatment and processing of accumulated waste. One of the alternative directions is membrane technologies, in particular, the development of biodegradable nanocomposite membranes. Anionic polyelectrolyte – Na-carboxymethyl cellulose with molecular weight Mw ~ 90000 and cationic polyelectrolyte – low molecular weight chitosan were used to create these membranes. Polymeric membranes were formed by mixing aqueous solutions of chitosan hydrochloride and Na-carboxymethylcellulose in different ratios. Analysis of X-ray diffractograms of polyelectrolyte complexes showed that with a gradual increase in the content of cationic polyelectrolyte from 5 % to 17 %, the structure of polyelectrolyte complexes changes dramatically. Whereas, the diffractograms of polyelectrolyte complexes with chitosan content from 29 % to 84 % are similar. The effectiveness of the obtained membranes was tested on a barometric device at different pressures. It was established that membranes based on polyelectrolyte complexes with a stoichiometric ratio of anionic and cationic polyelectrolytes turned out to be the most productive. The degree of water purification was checked by indicators of color selectivity. The obtained results allow us to conclude that with an increase in the duration of purification, the selectivity increases

Development of a pH-responsive intelligent label using low molecular weight chitosan grafted with phenol red for food packaging applications

In this study, we successfully developed a screen-printed pH-responsive intelligent label using low molecular weight chitosan grafted with phenol red (LCPR) as a colorant for screen printing ink. The LCPR was synthesized via a Mannich reaction, and its successful grafting was confirmed through FT-IR, UV–vis, and NMR spectroscopy. The LCPR exhibited lower crystallinity and thermal stability compared to low molecular weight chitosan (LC) and demonstrated zwitterionic behavior. To create intelligent labels, the LCPR-based ink was efficiently printed on cotton substrates with high resolution. The label exhibited remarkable sensitivity to buffer pH solutions and ammonia gas, leading to distinctive color changes from orange to red to purple. Additionally, the label showed excellent reversibility, storage stability, and leaching resistance to different food simulant solutions. The label was utilized to monitor shrimp freshness, successfully detecting a noticeable color shift upon spoilage. These findings highlight the significant potential of the LCPR-based label as an intelligent food packaging solution, offering pH-responsiveness and color stability for qualitative freshness detection of protein-rich food.

Synthesis and comprehensive characterization with anticancer activity assessment of salicylaldehyde and 2-acetylphenol based chitosan thiosemicarbazones and their copper(II) complexes

Functionalization of chitosan as salicylaldehyde and 2-acetylphenol-based chitosan thiosemicarbazone involving amino group at C2 position of pyranose ring was confirmed by comprehensive characterization by spectroscopic and analytical ways. Both the low molecular weight (Mw) chitosan oligosaccharide (CS) (Mw < 3000 Da, degree of deacetylation (DDA) = 87 %) and the crab shell chitosan (CCS) (Mw = 350 kDa, DDA = 67 %) functionalized thiosemicarbazones behaved as ONS tridentate ligand to form the square planar copper(II) complexes with a chloride ion as an additional ligand to satisfy the co-ordination sphere. All the derivatives were found thermally stable till the commencement of chitosan backbone disruption at 200 °C. The MTT assay profiles showed a conspicuous enhancement in the in vitro antitumorigenic and anticancer activity of native chitosan upon its functionalization as phenolic carbaldehyde chitosan thiosemicarbazones. Further, the assays more often revealed a further lowering of cell viability with chitosan oligosaccharide derivatives in comparison to high molecular weight chitosan derivatives, and a lower viability of the MCF-7 cancer cells than the tumorigenic MDCK cells. Both the low Mw chitosan with high DDA and high Mw chitosan with low DDA, the chitosan-functionalized salicylaldehyde based thiosemicarbazones, and their copper(II) chitosan thiosemicarbazone complexes were found to have minimal toxicity with IC50 >600 μgmL−1 against the mouse embryonic normal fibroblast NIH3T3 cells. These results were indicatives of more protonation and enhanced anticancer activity of chitosan oligosaccharide derivatives, and preferential cytotoxicity of chitosan biomaterials against the tumorigenic and cancer cells with more negatively charged cell surfaces.

Comparative study of the effect of cross‐linking degree on chitosan hydrogels synthesized with low and medium molecular weight chitosan

AbstractChitosan (CS) is often used in hydrogels due to its natural origin, sustainability, non‐toxicity, and biodegradability. However, the physicochemical properties of CS hydrogels generated via physical cross‐linking are relatively poor. CS hydrogels were prepared by cross‐linking with glutaraldehyde (GA) at different ratios ranging from 1% to 10% (w/w), using two different molecular weight CS. The swelling degree of hydrogels was investigated at pH 2.0, 5.6, and 7.4. The structure, morphology, and thermal characteristics of hydrogels were examined using Fourier transform infrared, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analysis, respectively. Compression tests were conducted using Zwick/Roell universal testing equipment following ASTM D695. In vitro degradation studies were performed in enzyme and enzyme‐free mediums at pH 7.4. The study demonstrated that low molecular weight CS (L‐CS) hydrogels have a lower sol content and higher swelling values than medium molecular weight CS (M‐CS) hydrogels. Both L‐CS and M‐CS hydrogels cross‐linked with 1% GA showed maximum swelling degrees at pH 2.0. Thermal analysis concluded that M‐CS hydrogels have higher thermal stability than L‐CS hydrogels. It was also found that the M‐CS hydrogels have higher compressive moduli. The degradation experiments in both enzyme and enzyme‐free media showed that L‐CS hydrogels have higher degradation rates.Highlights Chemically cross‐linked hydrogels synthesized using low and medium molecular weight chitosan. The mechanical and physical properties of medium and low molecular weight chitosan hydrogels were compared. Degradation experiments were performed in both enzyme and enzyme‐free media. Swelling values decreased noticeably with the increasing molecular weight. Low molecular weight chitosan improved the biodegradability of hydrogels.

Fabrication of Eucalyptus Oil-loaded Ciprofloxacin Hydrochloride Topical Films for Enhanced Treatment of Post-Operative Wound Infection

Background: The efficacious penetration of antimicrobials at infectious sites and the reduction of microbial resistance development are critical in controlling the effective treatment of post-operative wound infection. Methods: To create the enhanced antimicrobial topical films, a solvent casting method for ciprofloxacin hydrochloride (CiproHCl) loaded eucalyptus oil (EO) containing low molecular weight chitosan films was used. Nine batches of CiproHCl with varying chitosan and glycerol concentrations were prepared and tested. Additionally, optimised CiproHCl films with EO were created and tested. The antimicrobial activity of CiproHCl-loaded EO containing low molecular weight chitosan films against S. Aureus, E. Coli, and B. Subtilus was tested. Results: The FT-IR spectroscopy and DSC analysis revealed no interaction between the drug and any of the other excipients, and the drug remained amorphous in chitosan film. The SEM analysis revealed that the prepared CiproHCl-loaded EO-containing films had smooth surfaces and large agglomerates. In vitro drug release testing revealed that the EO-loaded films have a sustained release profile of up to 16 hours with a cumulative drug release of 96.83%. In an ex vivo drug permeation study, CiproHCl-loaded EO-containing films demonstrated 2.44 times more permeation flux than CiproHCl-alone films. After six months, the stability study revealed that the CiproHCl-loaded EO-loaded EO-containing film showed no significant change in drug release profile or folding endurance. Conclusion: This present study highlights the possible usage of CiproHCl-loaded EO containing low molecular weight chitosan films in enhanced post-operative wound treatment.

Foliar Application of Micronutrients and Low Molecular Weight Polysaccharides on White Radish Grown in Impoverished Soil

Foliar application has been considered as the most effective way to supplement nutrients for crops. Besides macro- and micro-nutrients, foliar fertilizers should contain surfactants to wet plant leaves, and other adjuvants to control spray and prolong the retention time of nutrients on the leaf surface. Having diverse structures and properties, some polysaccharides can not only be used as drift control or adhesion agents to improve performance on the leaf and reduce washout of agrochemicals by rainwater, but also be utilized as plant growth promoters (PGP) or immuno-stimulating agents in agricultural production. In this study, low molecular weight chitosan and xanthan obtained by radiation degradation have been added to the microelement fertilizers to control diseases, promote the growth and development of vegetables, and further increase their nutrient uptake. Field trials on white radishes grown on impoverished soil revealed that the resulting foliar fertilizers significantly reduced the infection of popular pests and diseases, remarkably promoted the growth and development of the radish plants. The yield attributes and marketable yield of radish from all treatments were much higher than those of the control. The highest yields were 61.99 and 64.94 tons per ha in season 2019 and 2020, respectively, in the plants treated with the fertilizer containing both chitosan and xanthan. These results suggest that the fertilizer composed of micronutrients and low molecular weight chitosan and xanthan could be applied for better vegetable crops.

Chitosan alleviates ovarian aging by enhancing macrophage phagocyte-mediated tissue homeostasis

BackgroundAge-related changes in the ovarian microenvironment are linked to impaired fertility in women. Macrophages play important roles in ovarian tissue homeostasis and immune surveillance. However, the impact of aging on ovarian macrophage function and ovarian homeostasis remains poorly understood.MethodsSenescence-associated beta-galactosidase staining, immunohistochemistry, and TUNEL staining were used to assess senescence and apoptosis, respectively. Flow cytometry was employed to evaluate mitochondrial membrane potential (MMP) and apoptosis in granulosa cells lines (KGN), and macrophages phagocytosis. After a 2-month treatment with low molecular weight Chitosan (LMWC), ovarian tissues from mice were collected for comprehensive analysis.ResultsCompared with the liver and uterus, the ovary displayed accelerated aging in an age-dependent manner, which was accompanied by elevated levels of inflammatory factors and apoptotic cells, and impaired macrophage phagocytic activity. The aged KGN cells exhibited elevated reactive oxygen species (ROS) and apoptotic levels alongside decreased MMP. H2O2-induced aging macrophages showed reduced phagocytosis function. Moreover, there were excessive aging macrophages with impaired phagocytosis in the follicular fluid of patients with diminished ovarian reserve (DOR). Notably, LMWC administration alleviated ovarian aging by enhancing macrophage phagocytosis and promoting tissue homeostasis.ConclusionsAging ovarian is characterized by an accumulation of aging and apoptotic granulosa cells, an inflammatory response and macrophage phagocytosis dysfunction. In turn, impaired phagocytosis of macrophage contributes to insufficient clearance of aging and apoptotic granulosa cells and the increased risk of DOR. Additionally, LMWC emerges as a potential therapeutic strategy for age-related ovarian dysfunction.

Improving the technology for obtaining of low molecular weight chitosan under conditions of controlled enzymatic cleavage

Relevance. Annotation. Experimental data on improving the production technology of regulated enzymatic cleavage of chitosan to obtain its low-molecular derivatives are presented. Experimental studies were carried out in the conditions of the Department of Disease Diagnostics, Therapy, Obstetrics and Animal Reproduction of the Moscow State Academy of Veterinary Medicine and Biotechnology — MVA named after K.I. Skryabin and on the basis of the All-Russian Research and Technological Institute of the Biological Industry.Methods. Acid-soluble chitosan from king crab shell (MM 700 kDa, SDA 85%), chitosan succinate (MM 330 kDa, SZ 75.2%), low-molecular food chitosan (hydrochloride) (MM 50 kDa) were used as raw materials for obtaining new modifications of chitosan, gel chitosan (2% solution in 2% acetic acid) manufactured by Bioprogress LLC.Results. As a result of the experiment, the technological parameters of obtaining low-molecular chitosan by enzymatic hydrolysis were selected. The greatest decrease in the dynamic viscosity of chitosan was reliably observed in the pilot-industrial series II (by 29.3 times), and the pilot-industrial series I and III — by 6.9 and 10.6 times, respectively. As a result of enzymatic hydrolysis of chitosan in the pilot series II, it was possible to reduce the molecular weight from 700 to 24 kDa, and in series I and III — to 102 and 66 kDa. Based on the research results, a technological scheme for obtaining low-molecular-weight chitosan derivatives by enzymatic hydrolysis has been developed, tested and proposed for industrial use, technical conditions have been developed.

BIOPOLÍMERO QUITOSANA NA ADSORÇÃO DE GLIFOSATO: USO NO MONITORAMENTO OU REMEDIAÇÃO AMBIENTAL

In this work, low molecular weight chitosan was used to adsorb the herbicide glyphosate in aqueous solution. Considering the possibilities of remediation and monitoring in aquatic environments, chitosan was formatted into thin discs 0.8 mm thick and 2.5 cm in diameter. The films were characterized by SEM, EDS and FTIR. In the adsorption study, a chitosan disc was able to adsorb 100% of a 5 mgL-1 glyphosate solution. Pseudo-first-order, pseudo-second-order and Elovich kinetic models were applied and it was found that chemisorption predominates in the adsorption process. Thus, chitosan films can act very well as a material for remediating water bodies contaminated by glyphosate. For monitoring studies, the possibility of using chitosan films in DGT (Diffusive Gradients in Thin Films) technique was verified and the diffusive material used was 1.5% agarose film (m/v). The diffusion coefficient of glyphosate in the agarose gel was determined 7.94 x 10-10 m2s-1.

Engineering of targeting antioxidant polypeptide nanopolyplexes for the treatment of acute lung injury

The pathogenesis of acute lung injury (ALI) involves various mechanisms, such as oxidative stress, inflammation, and epithelial cell apoptosis. However, current drug therapies face limitations due to issues like systemic distribution, drug degradation in vivo, and hydrophobicity. To address these challenges, we developed a pH-responsive nano-drug delivery system for delivering antioxidant peptides to treat ALI. In this study, we utilized low molecular weight chitosan (LMWC) and hyaluronic acid (HA) as carrier materials. LMWC carries a positive charge, while HA carries a negative charge. By stirring the two together, the electrostatic adsorption between LMWC and HA yielded aggregated drug carriers. To specifically target the antioxidant drug WNWAD to lung lesions and enhance therapeutic outcomes for ALI, we created a targeted drug delivery system known as HA/LMWC@WNWAD (NPs) through a 12-h stirring process. In our research, we characterized the particle size and drug release of NPs. Additionally, we assessed the targeting ability of NPs. Lastly, we evaluated the improvement of lung injury at the cellular and animal levels to investigate the therapeutic mechanism of this drug targeting delivery system.

Mucoadhesive capsules based on bacterial nanocellulose and chitosan as delivery system of turmeric extract

Current efforts in stomach-related drug design focus on improving drug bioavailability within the gastric region. Bacterial nanocellulose (BNC) has been established as a suitable material for drug delivery systems; however, it lacks adhesion to the gastric environment. This limitation can be addressed by leveraging the mucoadhesive properties of low molecular weight chitosan (LMWC). Therefore, we aimed to develop mucoadhesive capsules constructed from BNC coated with crosslinked LMWC, intended for targeted drug delivery in the gastric region. The capsules were characterized using scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and mucoadhesion assessments. Under acidic conditions, crosslinked chitosan exhibited enhanced swelling relative to neutral conditions. The coating of chitosan onto the BNC fibrillar network of the capsules resulted in the superimposition of vibration bands and enhanced thermal stability. Furthermore, the capsules exhibited significant mucoadhesive properties in the gastric environment, with an attachment force measuring 89.151 ± 6.226 mN. To validate the efficacy of the system, we utilized antioxidant turmeric extract (TE) as a bioactive compound with chemopreventive potential against stomach cancer. TE was adsorbed onto BNC in a reversible multilayer system, enabling controlled adsorption and desorption. These findings highlight the significance of developing mucoadhesive capsules as a tailored drug delivery system for gastric conditions, particularly in the context of treating stomach diseases as cancer.

Effects of chitosan with different molecular weights on storage quality and fungi inhibition of mini-cucumber

The effect of low (LWC, 30 kD), medium (MWC, 150 kD) and high molecular weight chitosan (HWC, 300 kD) coatings on storage quality and fungi inhibition of mini-cucumber was evaluated. Chitosan coatings significantly reduced the weight loss, and delayed the color change and sensory score of mini-cucumber when compared with the control. Chitosan coatings significantly retarded the decrease of DPPH free radical scavenging rate and total phenol content, and inhibited the total number of bacterial colonies and the viable numbers of yeast and molds in mini-cucumber. Chitosan coatings also significantly reduced the disease incidence and disease severity of mini-cucumber artificial inoculated with Botrytis cinerea. LWC coating showed superior preservation effectiveness and antifungal activity to MWC and HWC coating. Compared with the control, LWC coating prolonged the shelf life by 6 days which was evaluated by sensory score, and reduced the total number of bacterial colonies and viable numbers of yeast and molds in mini-cucumber by 4.20 log10 CFU/g and 2.72 log10 CFU/g, respectively. These results suggested that chitosan molecular weights affected preservation effectiveness and antifungal activity against B. cinerea and LWC could be used to prolong the shelf life of mini-cucumber and maintain its quality after harvest.

HDL-Chitosan Nanoparticles for siRNA Delivery as an SR-B1 Receptor Targeted System.

High-Density Lipoprotein (HDL) is a complex structure unique to the human body. ApoA-1 protein is a significant structural/functional protein of HDL and provides a natural interaction with the SR-B1 receptors on the cell membrane. The overexpression of the SR-B1 receptor in the membrane of malignant cells suggests that targeting cancer cells can be possible using HDL. The objective of this study was to prepare HDL-conjugated chitosan nanoparticles containing a genetic material that can be used for liver cancer. HDL used in the preparation of the formulations have been obtained by isolating from blood samples taken from healthy volunteers. Bcl-2 siRNA inhibiting BCL-2 oncogene was selected as the genetic material. Chitosan nanoparticles were prepared using the ionic gelation method utilizing low molecular weight chitosan. Physicochemical properties of formulations, transfection efficacy, and cytotoxicity of them on 3T3 and HepG2 cell lines were examined. The average diameters of the selected formulations were below 250 nm with a positive zeta potential value between +36 ± 0.1 and +34 ± 0.5 mV. All formulations protected Bcl-2 siRNA from enzymatic degradation in the presence of serum. Cellular uptake ratios of particles by HepG2 cells were found to be between 76% and 98%. HDL/chitosan nanoparticles/Bcl-2 siRNA complex was found to be more toxic when compared to chitosan nanoparticles/Bcl-2 siRNA complex and naked Bcl-2 siRNA. According to attained results, the HDL-conjugated chitosan nanoparticles can bring advantages for targeted siRNA delivery to malignant cells that overexpress SR-B1 receptors, such as HepG2.

Low molecular weight chitosan oligosaccharides form stable complexes with human lactoferrin.

Proteins in tears, including human lactoferrin (HLF), can be deposited and denatured on contact lenses, increasing the risk of microbial cell attachment to the lens and ocular complications. The surfactants currently used in commercial contact lens care solutions have low clearance ability for tear proteins. Chitosan oligosaccharide (COS) binds to a variety of proteins and has potential for use in protein removal, especially in contact lens care solutions. Here, we analyzed the interaction mechanism of COSs hydrolyzed from chitosan from different resources with HLF. The molecular weights (MWs) and concentrations of COSs were key factors for the formation of COS-HLF complexes. Lower MWs of COSs could form more stable COS-HLF complexes. COS from Aspergillus ochraceus had a superior effect on HLF compared with COS from shrimp and crab shell with the same MWs. In conclusion, COSs could bind to and cause a conformational change in HLF. Therefore, COSs, especially those with low MWs, have potential as deproteinizing agents in contact lens care solution.

Oligochitosan for mutual paddy and tilapia growth performance in aquaponics system

This study was conducted to evaluate the influence of oligochitosan added to the fish tank to benefit both tilapia and paddy in the aquaponics system. Chitosan was irradiated at 25 kGy to produce low molecular weight chitosan (oligochitosan). The characteristics of chitosan such as molecular weight, solubility, viscosity, and colour were investigated. The low molecular weight chitosan (Mw = 5 kDa), obtained from the radiation degradation by gamma-ray was further used as a dietary supplement for tilapia. Nitrogen, one of the most important macro-nutrients for plant growth and crop productivity was supplied by fish faeces and food waste containing oligochitosan in fish tanks. The addition of oligochitosan could improve growth, and immune responses and alter the bacterial flora in the intestine of tilapia, so as to play a role in promoting the growth of paddy in the aquaponics system.

Interaction mechanism between low molecular weight chitosan nanofilm and functionalized surfaces in aqueous solutions

Low-molecular-weight chitosan (LMW chitosan, <10 kDa) have a significant potential for biomedical applications (e.g., antimicrobial and gene/drug delivery) because of their higher water solubility at pH values ranging from 3.0 to 8.5, compared to that of the high-molecular-weight (>100 kDa) chitosan. A comprehensive understanding of the LMW interaction mechanism with specific functional groups is necessary to predict their binding efficiency to other molecules for effectively utilizing their potential within biological systems. In this study, we used a surface forces apparatus (SFA) to investigate molecular interactions between LMW chitosan and four different functionalized self-assembled monolayers (SAMs) in aqueous solutions at pH values of 3.0, 6.5, and 8.5. Chitosan exhibited the strongest interaction energy with methyl-terminated SAM (CH3-SAM), indicating the significance of hydrophobic interaction. Many chitin/chitosan fibers in nature bind polyphenols (e.g., eumelanin) to form robust composites, which can be attributed to the strong attraction between chitosan and phenyl-SAM, presumably caused by cation–π interactions. These findings demonstrate the potential of modulating the magnitude of the interaction energy by controlling the solution pH and types of targeted functional groups to realize the optimal design of chitosan-based hybrid composites with other biomolecules or synthetic materials.

Application interval and concentration effect of gamma degraded chitosan on mulberry plant

Gamma radiation is one of the established tools to induce chain-scission of chitosan for low molecular weight chitosan preparation. The introduction of various radiation doses to chitosan powder produces degraded chitosan with various molecular ranges. They indicate different physicochemical and biological properties which are very important in product development. This study aimed to produce low molecular weight chitosan with an average molecular weight below 20 000 Da by exposing chitosan powder to gamma radiation at doses of 25, 50, 75 and 100 kGy. Then, to observe its growth-promoting activity on mulberry plants. The gamma-degraded chitosan was characterized by size exclusion chromatography-multi-angles laser light scattering (SEC-MALLS) and Fourier-Transform infrared (FTIR) to determine its weight-average molecular weight and molecular composition changes, respectively. After that, the gamma-degraded chitosan powder was dissolved in an acidic solution before spraying into mulberry. In the field, the mulberry plants were treated with 40, 80 and 100 ppm of degraded chitosan by foliar application. Each treatment consisted of 5 replicates of 2- 3 months-old mulberry plants which were randomly picked from the nursery. The control plants were treated with commercial growth promoter at concentration of 100 ppm which was applied weekly according to the farmer's practice. The study was carried out for 4.5 months at 2 different application intervals which were every two- and four-weeks’ time. The mulberry plants treated with 80 ppm and 100 ppm degraded chitosan every two- and four-weeks showed better results on an average number of leaves and fruit, respectively compared to control.