Low-lying Lowest Unoccupied Molecular Orbital Research Articles

A Tricyclic Framework with Integrated B←N and Cyano Dual Functionalization for Superior n-Type Organic Electronics.

n-Type conjugated polymers featuring low-lying lowest unoccupied molecular orbital (LUMO) energy levels are essential for achieving high-performance n-type organic thin-film transistors (OTFTs) and organic thermoelectrics (OTEs). However, the synthesis of acceptors with strong electron-withdrawing characteristics presents a significant challenge. Herein, a peripheral functionalization strategy is employed on the widely used tricyclic framework anthracene by introducing dual N,O-bidentate BF2/B(CN)2 groups to enhance its electron-withdrawing capability. This approach successfully navigates synthetic challenges, leading to the development of two novel acceptor building blocks: DBNF and DBNCN. Compared to the counterparts with a single N,O-bidentate BF2/B(CN)2 moiety, DBNF and DBNCN exhibit an extended π-backbone, enhanced molecular packing, and improved electron-withdrawing properties. Utilizing these innovative acceptor monomers, copolymers, PDBNF and PDBNCN, are synthesized, which exhibit considerably suppressed LUMO ≈ -4.0 eV. The deep LUMO of PDBNF together with its favourable bimodal packing orientation leads to remarkable electron mobility of 3.04 cm² V⁻¹ s⁻¹ with improved stability in OTFTs. Importantly, efficient n-doping in OTEs is achieved with PDBNCN, exhibiting exceptional conductivity of 95.5 S cm⁻¹ and a maximum power factor of 147.8 μW m⁻¹ K⁻²-among the highest reported for solution-processed n-type polymers.

A Tricyclic Framework with Integrated B←N and Cyano Dual Functionalization for Superior n‐Type Organic Electronics

n‐Type conjugated polymers featuring low‐lying lowest unoccupied molecular orbital (LUMO) energy levels are essential for achieving high‐performance n‐type organic thin‐film transistors (OTFTs) and organic thermoelectrics (OTEs). However, the synthesis of acceptors with strong electron‐withdrawing characteristics presents a significant challenge. Herein, a peripheral functionalization strategy is employed on the widely used tricyclic framework anthracene by introducing dual N,O‐bidentate BF2/B(CN)2 groups to enhance its electron‐withdrawing capability. This approach successfully navigates synthetic challenges, leading to the development of two novel acceptor building blocks: DBNF and DBNCN. Compared to the counterparts with a single N,O‐bidentate BF2/B(CN)2 moiety, DBNF and DBNCN exhibit an extended π‐backbone, enhanced molecular packing, and improved electron‐withdrawing properties. Utilizing these innovative acceptor monomers, copolymers, PDBNF and PDBNCN, are synthesized, which exhibit considerably suppressed LUMO ≈ –4.0 eV. The deep LUMO of PDBNF together with its favourable bimodal packing orientation leads to remarkable electron mobility of 3.04 cm² V⁻¹ s⁻¹ with improved stability in OTFTs. Importantly, efficient n‐doping in OTEs is achieved with PDBNCN, exhibiting exceptional conductivity of 95.5 S cm⁻¹ and a maximum power factor of 147.8 μW m⁻¹ K⁻²—among the highest reported for solution‐processed n‐type polymers.

B3H3Be ← F-: A Case of Extremely Strong Dative Bond.

Chemical bonding has attracted chemists since its inception. Dative bonding between a donor and acceptor moiety is also an important phenomenon, which results in stabilization of many chemical compounds. Herein, we show that an extremely strong dative bond is possible between a fluoride ion and a beryllium center which is a part of a half-sandwich complex, B3H3Be. Quantum chemical calculations have shown the possibility of formation of a half-sandwich complex of Be with a B3H32- ring. Calculations reveal that the complex is stable toward dissociation. The half-sandwich complex features a very low-lying lowest unoccupied molecular orbital (LUMO) concentrated on the Be atom, thereby indicating a Lewis acidic character of the complex. This lower-lying LUMO at the beryllium center is responsible for forming an extremely strong dative bond with the fluoride donor.

NIR‐II Absorption/Fluorescence of D–A π‐Conjugated Polymers Composed of Strong Electron Acceptors Based on Boron‐Fused Azobenzene Complexes

AbstractLuminescence in the second near‐infrared (NIR‐II, 1,000–1,700 nm) window is beneficial especially for deep tissue imaging and optical sensors because of intrinsic high permeability through various media. Strong electron‐acceptors with low‐lying lowest unoccupied molecular orbital (LUMO) energy levels are a crucial unit for donor–acceptor (D–A) π‐conjugated polymers (CPs) with the NIR‐II emission property, however, limited kinds of molecular skeletons are still available. Herein, D–A CPs involving fluorinated boron‐fused azobenzene complexes (BAz) with enhanced electron‐accepting properties are reported. Combination of fluorination at the azobenzene ligand and trifluoromethylation at the boron can effectively lower the LUMO energy level down to −4.42 eV, which is much lower than those of conventional strong electron‐acceptors. The synthesized series of CPs showed excellent absorption/fluorescence property in solution over a wide NIR range including NIR‐II. Furthermore, owing to the inherent solid‐state emissive property of the BAz skeleton, obvious NIR‐II fluorescence from the film (up to λFL=1213 nm) and the nanoparticle in water (λFL=1036 nm, brightness=up to 29 cm−1 M−1) were observed, proposing that our materials are applicable for developing next‐generation of NIR‐II luminescent materials.

NIR-II Absorption/Fluorescence of D-A π-Conjugated Polymers Composed of Strong Electron Acceptors Based on Boron-Fused Azobenzene Complexes.

Luminescence in the second near-infrared (NIR-II, 1,000-1,700 nm) window is beneficial especially for deep tissue imaging and optical sensors because of intrinsic high permeability through various media. Strong electron-acceptors with low-lying lowest unoccupied molecular orbital (LUMO) energy levels are a crucial unit for donor-acceptor (D-A) π-conjugated polymers (CPs) with the NIR-II emission property, however, limited kinds of molecular skeletons are still available. Herein, D-A CPs involving fluorinated boron-fused azobenzene complexes (BAz) with enhanced electron-accepting properties are reported. Combination of fluorination at the azobenzene ligand and trifluoromethylation at the boron can effectively lower the LUMO energy level down to -4.42 eV, which is much lower than those of conventional strong electron-acceptors. The synthesized series of CPs showed excellent absorption/fluorescence property in solution over a wide NIR range including NIR-II. Furthermore, owing to the inherent solid-state emissive property of the BAz skeleton, obvious NIR-II fluorescence from the film (up to λFL=1213 nm) and the nanoparticle in water (λFL=1036 nm, brightness=up to 29 cm-1 M-1) were observed, proposing that our materials are applicable for developing next-generation of NIR-II luminescent materials.

Metal Effect on Cationic [Cp2MH]+ (M = Group 4 and 5)-Mediated CO2 Hydrogenation in the Gas Phase.

Effective CO2 hydrogenation has recently attracted quite some attention for producing more valuable chemical oxygenates (such as methanol, formate) in mild conditions. However, the influence of the metal center on the CO2 activation remains unclear. First, electrospray ionization mass spectrometry (ESI-MS) was employed to explore the direct CO2 hydrogenation to formic acid mediated by [Cp2MH]+ (M = Zr, Hf) in the gas phase at room temperature. The key formate intermediate [Cp2M(O2CH)]+ (M = Zr, Hf) was confirmed by traveling wave ion mobility spectrometry (TWIMS). Second, to gain insights into the metal effect, the CO2 hydrogenation process involving Group 4 (i.e., Ti, Zr, Hf) transition metals was calculated along with Group 5 (i.e., V, Nb, Ta) by density functional theory (DFT) methods. The CO2 insertion process was found to be the rate-limiting step. For [Cp2TiH]+, [Cp2ZrH]+, [Cp2HfH]+, [Cp2VH]+, [Cp2NbH]+, and [Cp2TaH]+, the barriers are +7.7, +6.5, +5.9, +9.2, +8.0, and +6.3 kcal/mol, respectively. [Cp2HfH]+-mediated CO2 hydrogenation occurs the most rapidly, as revealed by MS. According to the orbital analysis on the CO2 insertion transition state, the electron-deficient metal center resulting in a low-lying lowest unoccupied molecular orbital (LUMO) could interact more favorably with the π bond of deformed CO2, which was also consistent with the natural bond orbital (NBO) results. Last but not the least, NBO charges on the metal centers were found to correlate linearly well with the CO2 insertion barriers rather than hydride affinity. Thus, the reactivity of different metal hydride complexes with CO2 to produce a formate could be estimated by the NBO charge on metals. Our findings might provide a series of candidates for the catalyst as well as guidance for catalyst design in mild CO2 hydrogenation.

Synergistic Use of All-Acceptor Strategies for the Preparation of an Organic Semiconductor and the Realization of High Electron Transport Properties in Organic Field-Effect Transistors.

The development of n-type organic semiconductor materials for transporting electrons as part of logic circuits is equally important to the development of p-type materials for transporting holes. Currently, progress in research on n-type materials is relatively backward, and the number of polymers with high electron mobility is limited. As the core component of the organic field-effect transistor (OFET), the rational design and judicious selection of the structure of organic semiconductor materials are crucial to enhance the performance of devices. A novel conjugated copolymer with an all-acceptor structure was synthesized based on an effective chemical structure modification and design strategy. PDPPTT-2Tz was obtained by the Stille coupling of the DPPTT monomer with 2Tz-SnMe3, which features high molecular weight and thermal stability. The low-lying lowest unoccupied molecular orbital (LUMO) energy level of the copolymer was attributed to the introduction of electron-deficient bithiazole. DFT calculations revealed that this material is highly planar. The effect of modulation from a donor-acceptor to acceptor-acceptor structure on the improvement of electron mobility was significant, which showed a maximum value of 1.29 cm2 V-1 s-1 and an average value of 0.81 cm2 V-1 s-1 for electron mobility in BGBC-based OFET devices. Our results demonstrate that DPP-based polymers can be used not only as excellent p-type materials but also as promising n-type materials.

A Three-Dimensional Silicon-Diacetylene Porous Organic Radical Polymer

A Three-Dimensional Silicon-Diacetylene Porous Organic Radical Polymer

Green Synthesis of Lactone‐Based Conjugated Polymers for n‐Type Organic Electrochemical Transistors

AbstractAs new and better materials are implemented for organic electrochemical transistors (OECTs), it becomes increasingly important to adopt more economic and environmentally friendly synthesis pathways with respect to conventional transition‐metal‐catalyzed polymerizations. Herein, a series of novel n‐type donor–acceptor‐conjugated polymers based on glycolated lactone and bis‐isatin units are reported. All the polymers are synthesized via green and metal‐free aldol polymerization. The strong electron‐deficient lactone‐building blocks provide low‐lying lowest unoccupied molecular orbital (LUMO) and the rigid backbone needed for efficient electron mobility up to 0.07 cm2 V−1 s−1. Instead, polar atoms in the backbone and ethylene glycol side chains contribute to the ionic conductivity. The resulting OECTs exhibit a normalized maximum transconductance gm,norm of 0.8 S cm−1 and a μC* of 6.7 F cm−1 V−1 s−1. Data on the microstructure show that such device performance originates from a unique porous morphology together with a highly disordered amorphous microstructure, leading to efficient ion‐to‐electron coupling. Overall, the design strategy provides an inexpensive and metal‐free polymerization route for high‐performing n‐type OECTs.

Recent Advances in Molecular Design of Organic Thermoelectric Materials

Recent Advances in Molecular Design of Organic Thermoelectric Materials

Electron Transport in Naphthalene Diimide Derivatives

Two naphthalene diimides derivatives containing two different (alkyl and alkoxyphenyl) N-substituents were studied, namely, N,N′-bis(sec-butyl)-1,4,5,8-naphthalenetetracarboxylic acid diimide (NDI-s-Bu) and N,N′-bis(4-n-hexyloxyphenyl)-1,4,5,8-naphthalenetetracarboxylic acid diimide (NDI-4-n-OHePh). These compounds are known to exhibit electron transport due to their electron-deficient character evidenced by high electron affinity (EA) values, determined by electrochemical methods and a low-lying lowest unoccupied molecular orbital (LUMO) level, predicted by density functional theory (DFT) calculations. These parameters make the studied organic semiconductors stable in operating conditions and resistant to electron trapping, facilitating, in this manner, electron transport in thin solid layers. Current–voltage characteristics, obtained for the manufactured electron-only devices operating in the low voltage range, yielded mobilities of 4.3 × 10−4 cm2V−1s−1 and 4.6 × 10−6 cm2V−1s−1 for (NDI-s-Bu) and (NDI-4-n-OHePh), respectively. Their electron transport characteristics were described using the drift–diffusion model. The studied organic semiconductors can be considered as excellent candidates for the electron transporting layers in organic photovoltaic cells and light-emitting diodes

B←N-Incorporated Dibenzo-azaacenes as n-Type Thermoelectric Materials.

Organic thermoelectric materials play a vital role in flexible power generating applications, such as wearable electronics and sensor networks. While there is a wealth of research on p-type organic thermoelectric materials, developments on n-type counterparts as complementary are comparatively limited. Herein, we report a new kind of n-type small-molecule thermoelectric materials based on B←N-incorporated dibenzo-azaacenes 1,2-DBNA-2 and 1,2-DBNA-5. Because of the low-lying lowest unoccupied molecular orbital (LUMO) energy levels, 1,2-DBNA-2 and 1,2-DBNA-5 could be efficiently n-doped, and the rigid and almost planar skeleton could ensure good carrier transfer. When doped with a typical n-dopant (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine (N-DMBI), 1,2-DBNA-5 exhibits a moderate conductivity of 0.01 S cm-1 and a power factor of 0.06 μW m-1 K-2 with a Seebeck coefficient of -244.4 μV K-1 in thermoelectric devices. These results not only demonstrate that B←N-incorporated dibenzo-azaacenes are a novel class of n-type thermoelectric materials but also highlight a new strategy to develop n-type organic thermoelectric materials.

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission.

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λPL =758-847 nm) with high absolute photoluminescence quantum yield (ΦPL =7-23%) originating from low-lying LUMO energy levels of the BAz moieties (-3.94 to -4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λPL =852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.

N-Type host materials based on nitrile and triazine substituted tricyclic aromatic compounds for high-performance blue thermally activated delayed fluorescence devices

Novel n-type host materials based on tricyclic aromatic compounds, dibenzo[b,d]furan and dibenzo[b,d]thiophene (2Trz6CNDBF and 2Trz6CNDBT), have been successfully synthesized and characterized for high-performance blue thermally activated delayed fluorescence (TADF) organic light-emitting devices (OLEDs). Dibenzo[b,d]furan and dibenzo[b,d]thiophene were utilized as central molecular building blocks to achieve excellent thermal stability and high triplet energy (ET). Nitrile and diphenyltriazine functional groups were introduced at the 6- and 2- positions of the central building blocks to achieve low-lying lowest unoccupied molecular orbital (LUMO) energy levels, high ET, and excellent electron transport properties. UV–Vis absorption, low-temperature photoluminescence, and ultraviolet photoelectron spectroscopy analysis showed that 2Trz6CNDBF and 2Trz6CNDBT possessed high ET (2.95 and 2.88 eV) and low-lying LUMO energy levels (−3.43 and −3.16 eV) that were well-matched with a blue TADF emitter, 5CzCN. Moreover, the electron-only device (EOD) result revealed that 2Trz6CNDBF and 2Trz6CNDBT had excellent electron transport properties. Blue TADF OLEDs fabricated with a p-type host material, mCBP, and n-type host, 2Trz6CNDBF or 2Trz6CNDBT, exhibited lower driving voltages (3.34 and 3.26 V, respectively) than a TADF OLED with only a p-type host material, mCBP (3.83 V). Blue TADF OLEDs with 2Trz6CNDBF and 2Trz6CNDBT exhibited superior external quantum efficiency (ηext, 15.6 and 14.7%), current efficiency (ηce, 33.8 and 32.7 cd A−1), and power efficiency (ηpe, 25.6 and 25.7 lm W−1), respectively. The ηext and ηce of blue TADF OLEDs with 2Trz6CNDBF and 2Trz6CNDBT increased by more than 70% and ηpe by approximately 150% compared to those of the TADF OLED with a single p-type host, mCBP. In addition, the device lifetimes of blue TADF OLEDs with 2Trz6CNDBF and 2Trz6CNDBT increased by more than 1000%. The efficient electron injection by the low-lying LUMO energy level, effective exciton confinement by high ET, and high thermal stability of the film morphology provided the enhanced efficiency and lifetime for blue TADF OLEDs with 2Trz6CNDBF and 2Trz6CNDBT.

Core-Twisted Tetrachloroperylenediimides: Low-Cost and Efficient Non-Fullerene Organic Electron-Transporting Materials for Inverted Planar Perovskite Solar Cells.

Herein, core-twisted tetrachloroperylenediimides (ClPDIs) were introduced as new efficient electron-transporting materials (ETMs) to replace the commonly used fullerene acceptor PC61 BM in inverted planar perovskite solar cells (PSCs). ClPDI showed a low-lying lowest unoccupied molecular orbital (LUMO) energy level of -3.95 eV, which was compatible with the conduction band of CH3 NH3 PbI3-x Clx (-3.90 eV). In addition, the role of the length of the alkyl side chain at the imide position of ClPDI in modulating the molecular solubility, aggregation capacity for charge-transport properties, surface hydrophobicity, and PSC performance was investigated. The device based on ClPDI-C4 (ClPDI with n-butyl side chains) as ETM achieved a maximum power conversion efficiency (PCE) of 17.3 % under standard AM 1.5G illumination, which iwas very competitive with that of the reference device employing PC61 BM/C60 (PCE=17.2 %) as ETM. Moreover, the devices with ClPDIs as ETMs exhibited better device stability than that with PC61 BM/C60 . This work highlights the great potential of ClPDI derivatives as low-cost (≈2.0 USD g-1 ) and effective ETMs to obtain efficient solution-processed inverted PSCs. This class of ClPDI derivatives is expected further promote the performance and stability of PSCs after extended investigation.

Stretching the P-C Bond. Variations on Carbenes and Phosphanes.

The stability and the structure of adducts formed between four substituted phosphanes (PX3, X:H, F, Cl, and NMe2) and 11 different carbenes have been investigated by DFT calculations. In most cases, the structure of the adducts depends strongly on the stability of the carbene itself, exhibiting a linear correlation with the increasing dissociation energy of the adduct. Carbenes of low stability form phosphorus ylides (F), which can be described as phosphane → carbene adducts supported with some back-bonding. The most stable carbenes, which have high energy lone pair, do not form stable F-type structures but carbene → phosphane adducts (E-type structure), utilizing the low-lying lowest unoccupied molecular orbital (LUMO) of the phosphane (with electronegative substituents), benefiting also from the carbene–pnictogen interaction. Especially noteworthy is the case of PCl3, which has an extremely low energy LUMO in its T-shaped form. Although this PCl3 structure is a transition state of rather high energy, the large stabilization energy of the complex makes this carbene–phosphane adduct stable. Most interestingly, in case of carbenes with medium stability both F- and E-type structures could be optimized, giving rise to bond-stretch isomerism. Likewise, for phosphorus ylides (F), the stability of the adducts G formed from carbenes with hypovalent phosphorus (PX—phosphinidene) is in a linear relationship with the stabilization of the carbene. Adducts of carbenes with hypervalent phosphorus (PX5) are the most stable when X is electronegative, and the carbene is highly nucleophilic.

Rigid Coplanar Polymers for Stable n-Type Polymer Thermoelectrics.

Low n-doping efficiency and inferior stability restrict the thermoelectric performance of n-type conjugated polymers, making their performance lag far behind of their p-type counterparts. Reported here are two rigid coplanar poly(p-phenylene vinylene) (PPV) derivatives, LPPV-1 and LPPV-2, which show nearly torsion-free backbones. The fused electron-deficient rigid structures endow the derivatives with less conformational disorder and low-lying lowest unoccupied molecular orbital (LUMO) levels, down to -4.49 eV. After doping, two polymers exhibited high n-doping efficiency and significantly improved air stability. LPPV-1 exhibited a high conductivity of up to 1.1 S cm-1 and a power factor as high as 1.96 μW m-1 K-2 . Importantly, the power factor of the doped LPPV-1 thick film degraded only 2 % after 7 day exposure to air. This work demonstrates a new strategy for designing conjugated polymers, with planar backbones and low LUMO levels, towards high-performance and potentially air-stable n-type polymer thermoelectrics.

Rigid Coplanar Polymers for Stable n‐Type Polymer Thermoelectrics

AbstractLow n‐doping efficiency and inferior stability restrict the thermoelectric performance of n‐type conjugated polymers, making their performance lag far behind of their p‐type counterparts. Reported here are two rigid coplanar poly(p‐phenylene vinylene) (PPV) derivatives, LPPV‐1 and LPPV‐2, which show nearly torsion‐free backbones. The fused electron‐deficient rigid structures endow the derivatives with less conformational disorder and low‐lying lowest unoccupied molecular orbital (LUMO) levels, down to −4.49 eV. After doping, two polymers exhibited high n‐doping efficiency and significantly improved air stability. LPPV‐1 exhibited a high conductivity of up to 1.1 S cm−1 and a power factor as high as 1.96 μW m−1 K−2. Importantly, the power factor of the doped LPPV‐1 thick film degraded only 2 % after 7 day exposure to air. This work demonstrates a new strategy for designing conjugated polymers, with planar backbones and low LUMO levels, towards high‐performance and potentially air‐stable n‐type polymer thermoelectrics.

Stereodefined Access to Lactams via Olefin Difunctionalization: Iridium Nitrenoids as a Motif of LUMO-Controlled Dipoles.

Reported herein is a general platform of a stereodefined access to γ-lactams via Cp*Ir-catalyzed olefin difunctionalization, where in situ generated Ir-nitrenoid is utilized as a key motif of 1,3-dipoles to enable amido transfer in a syn-selective manner. Computational studies suggested that the stereodefined process can be attributed to the proposed working mode of concerted [3 + 2] cyclization. Frontier molecular orbital (FMO) analysis implied that a low-lying lowest unoccupied molecular orbital (LUMO) of the Ir-imido fragment engages in the olefin interaction. Mechanistic understanding on the nitrene transfer process led us to develop mild catalytic protocols of stereoselective difunctionalization of alkenyl dioxazolones to furnish α-(haloalkyl)- or (oxyalkyl)lactam products which are of high synthetic and medicinal utility. Product stereochemistry ( threo and erythro) was found to be designated by the olefin geometry ( E/ Z) of substrates.

Synthesis of Stannole-Containing π-Conjugated Polymers by Post-Element Transformation of Organotitanium Polymer.

The synthesis of stannole-2,5-diyl-containing π-conjugated polymers by the post-element transformation of a regioregular organotitanium polymer is described. For example, a 1,1-diphenylstannole-containing polymer is obtained in 83% yield by the reaction of a regioregular organotitanium polymer, which is prepared from 1,4-bis(2-ethylhexyloxy)-2,5-diethynylbenzene and a low-valent titanium complex with diphenyltin dichloride at -50 °C to ambient temperature. The number-average molecular weight and molecular weight distribution (Mn and Mw /Mn ) of the stannole-containing polymer are estimated as 4800 and 1.8, respectively. The obtained polymer is found to have the extended π-conjugated backbone and relatively low-lying lowest unoccupied molecular orbital (LUMO) energy level (-3.12 eV), which is supported by its UV-vis absorption spectrum and cyclic voltammetric (CV) analysis. In addition, the stannole-containing polymer is found to be applicable to a chemosensor for fluoride anion where the color and photoluminescence intensity of the polymer solution exhibits a distinct change in the presence of a fluoride anion.