Low-loss Phase Change Material Research Articles

Multifunctional metalens generation using bilayer all-dielectric metasurfaces.

Optical metasurfaces exhibit unprecedented ability in light field control due to their ability to locally change the phase, amplitude, and polarization of transmitted or reflected light. We propose a multifunctional metalens with dual working modes based on bilayer geometric phase elements consisting of low-loss phase change materials (Sb2Se3) and amorphous silicon (a-Si). In transmission mode, by changing the crystalline state of the Sb2Se3 scatterer, a bifocal metalens with an arbitrary intensity ratio at the telecommunication C-band is realized, and the total focusing efficiency of the bifocal metalens is as high as 78%. Also, at the resonance wavelength of the amorphous Sb2Se3 scatterer, the scatterer can be regarded as a half-wave plate in reflection mode. The multifunctional metalens can reversely converge incident light into a focal point with a focusing efficiency of up to 30%. The high focusing efficiency, dynamic reconfigurability, and dual working modes of the multifunctional metalens contribute to polarization state detection, optical imaging, and optical data storage. In addition, the bilayer geometric phase elements can be easily extended to multilayer, which significantly improves the capability of manipulating the incident light field.

On-chip sub-wavelength Bragg grating design based on novel low loss phase-change materials.

We propose a reconfigurable and non-volatile Bragg grating in the telecommunication C-band based on the combination of novel low-loss phase-change materials (specifically Ge2Sb2Se4Te1 and Sb2S3) with a silicon nitride platform. The Bragg grating is formed by arrayed cells of phase-change material, whose crystallisation fraction modifies the Bragg wavelength and extinction ratio. These devices could be used in integrated photonic circuits for optical communications applications in smart filters and Bragg mirrors and could also find use in tuneable ring resonators, Mach-Zehnder interferometers or frequency selectors for future laser on chip applications. In the case of Ge2Sb2Se4Te1, crystallisation produces a Bragg resonance shift up to ∼ 15 nm, accompanied with a large amplitude modulation (insertion loss of 22 dB). Using Sb2S3, low losses are presented in both states of the phase change material, obtaining a ∼ 7 nm red-shift in the Bragg wavelength. The gratings are evaluated for two period numbers, 100 and 200 periods. The number of periods determines the bandwidth and extinction ratio of the filters. Increasing the number of periods increases the extinction ratio and reflected power, also narrowing the bandwidth. This results in a trade-off between device size and performance. Finally, we combine both phase-change materials in a single Bragg grating to provide both frequency and amplitude modulation. A defect is introduced in the Sb2S3 Bragg grating, producing a high quality factor resonance (Q ∼ 104) which can be shifted by 7 nm via crystallisation. A GSST cell is then placed in the defect which can modulate the transmission amplitude from low loss to below -16 dB.

Polariton nanophotonics using phase-change materials

Polaritons formed by the coupling of light and material excitations enable light-matter interactions at the nanoscale beyond what is currently possible with conventional optics. However, novel techniques are required to control the propagation of polaritons at the nanoscale and to implement the first practical devices. Here we report the experimental realization of polariton refractive and meta-optics in the mid-infrared by exploiting the properties of low-loss phonon polaritons in isotopically pure hexagonal boron nitride interacting with the surrounding dielectric environment comprising the low-loss phase change material Ge3Sb2Te6. We demonstrate rewritable waveguides, refractive optical elements such as lenses, prisms, and metalenses, which allow for polariton wavefront engineering and sub-wavelength focusing. This method will enable the realization of programmable miniaturized integrated optoelectronic devices and on-demand biosensors based on high quality phonon resonators.

Using Low-Loss Phase-Change Materials for Mid-Infrared Antenna Resonance Tuning

We show tuning of the resonance frequency of aluminum nanoantennas via variation of the refractive index n of a layer of phase-change material. Three configurations have been considered, namely, with the antennas on top of, inside, and below the layer. Phase-change materials offer a huge index change upon the structural transition from the amorphous to the crystalline state, both stable at room temperature. Since the imaginary part of their permittivity is negligibly small in the mid-infrared spectral range, resonance damping is avoided. We present resonance shifting to lower as well as to higher wavenumbers with a maximum shift of 19.3% and a tuning figure of merit, defined as the resonance shift divided by the full-width at half-maximum (FWHM) of the resonance peak, of 1.03.