Infrasound Research Articles

Specification of INF01LE, INF03, and INF04LE infrasound sensors for the observation and detection of destructive geophysical events

When an object moves through the atmosphere, it induces pressure fluctuations. If the scale of the object’s movement spans several hundred meters to several kilometers, the period of the pressure fluctuation will range from several seconds to several tens of seconds, determined by the ratio of the scale to the speed of sound. These pressure fluctuations manifest within the frequency range between audible sound (> 20 Hz) and infrasound (< 20 Hz and > 3 mHz). The infrasonic waves, characterized by their low-frequency nature, present a promising avenue for long-distance remote sensing, particularly in the monitoring of geophysical events with the potential for widespread destruction, such as earthquakes and tsunamis. We developed sensors of both membrane and microphone types to monitor infrasound in lower or higher frequency, respectively. These sensors were installed on the Pacific side of Japan to observe infrasound mainly generated by tsunamis. The key advantage lies in the faster propagation speed of Lamb waves (∼\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\sim$$\\end{document}310 m/s) compared to that of tsunami waves (∼\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\sim$$\\end{document}200 m/s), making them a valuable precursor for timely detection. By combining with a small MEMS 3-axis accelerometers, this study explores the feasibility of identifying a sudden atmospheric pressure surge within the infrasonic frequency range, following a significant earthquake. The observed surge serves as a crucial indicator of the imminent arrival of large tsunami waves along the shoreline situated between the earthquake’s epicenter and the observation site. The practical implication of this detection methodology is profound, as it could potentially trigger early warning systems, leading to timely and targeted evacuations. These infrasound sensors effectively detected infrasound produced not only by tsunamis but also by volcanic eruptions, meteorite explosions, and so on. This research focuses on the significance of monitoring geophysical events in the infrasound frequency range by demonstrating the development of our infrasound sensors and the natural phenomena captured by these instruments. The study presents observational results based on three types of sensors (INF01LE, INF03, and INF04LE), each exhibiting a flat response within specific frequency ranges: 0.003 to 6.25 Hz, 0.1 to 100 Hz, and 0.1 to 100 Hz, respectively. These sensors have been rigorously tested across various natural phenomena to validate their effectiveness in capturing infrasonic waves. The findings of this research contribute to the growing body of knowledge on infrasonic wave coming from various geophysical disaster perspectives.

Mechanism of airborne sound absorption through triboelectric effect for noise mitigation

Mitigating broadband noise with passive airborne sound absorbers has been a long-lasting challenge, particularly for low-frequency anthropogenic sounds below kilohertz with long wavelengths, which require bulky materials for effective absorption. Here, we propose a strategy that utilizes local triboelectric effect and in-situ electrical energy dissipation mechanism for airborne sound absorption. This approach involves a fundamentally different mechanism that converts airborne sound into electricity for energy dissipation, in contrast to conventional mechano-thermal energy conversion mechanisms. We establish an equivalent acoustic impedance model to provide theoretical analysis of the underlying sound absorption mechanisms, with a theoretical maximum mechano-electro-thermal coupling efficiency approaching 100% under optimal conditions. We design fibrous triboelectric composite foam materials accordingly and show their substantially boosted acoustic absorption performance experimentally, where the adoption of diverse triboelectric material pairs validates that a larger difference in material charge affinities intensifies the local triboelectric effect and results in higher acoustic absorbing performance.

Influence of density variations of ionosphere plasma on the conditions of electromagnetic whistler waves propagation in the ionosphere

Background. Plasma density variations caused by infrasonic wave can significantly affect conditions of propagation and reflection of whistler electromagnetic wave incident on the ionosphere from above. Aim. In that work, relationship between the coefficient of wave energy reflection from ionosphere, electromagnetic wave field near the ground surface and parameters of infrasonic wave are studied. Methods. The collocation method for solving the boundary problem for a plane-layered ionosphere and the perturbation theory method are used to find the electromagnetic wave field. Results. The greatest modulation of the reflection coefficient is associated with density perturbations at altitudes 80–110 km where whistler decay increases by an order of magnitude at the local altitude region (less than 15–20 km). In that case, the reflection coefficient variation can achieve 40 %. Conclusion. The results obtained are important for understanding the interconnection of magnetosphere radiation processes of different nature. The study of the modulation of coefficient of whistler reflection from the ionosphere is relevant for explaining the operation modes of a plasma magnetospheric maser.

Resting state network changes induced by experimental inaudible infrasound exposure and associations with self-reported noise sensitivity and annoyance.

The effects of prolonged infrasound (IS) exposure on brain function and behavior are largely unknown, with only one prior study investigating functional connectivity (FC) changes. In a long-term randomized-controlled trial, 38 participants were exposed to inaudible airborne IS (6Hz, 80-90 dB) or sham devices for four weeks (8h/night). We assessed FC changes in resting-state networks (auditory, default mode (DMN), sensorimotor (SMN), and executive control (ECN)), and explored IS 'sensitivity' as a predictor of identified significant FC changes. We also examined correlations between somatic symptoms and FC. IS exposure led to decreased FC in the right precuneus (DMN) and increased FC in the Vermis IV and V (SMN). In the ECN, we observed increased FC in the right frontal middle gyrus (BA8) and the right inferior parietal lobe, and decreased FC in another region of the right frontal middle gyrus. Changes in the ECN (right inferior parietal lobe) were negatively associated with self-reported annoyance from IS/low-frequency noise. A significant negative association was found between FC changes in the DMN (right precuneus) and somatic symptoms. Our study is the first to investigate prolonged IS exposure effects on brain FC, revealing changes in the vDMN, SMN, and ECN, but not in the auditory network. Future studies should assess annoyance and sensitivity markers, fine-grained measures of somatic symptoms, and stratify samples by sensitivity to uncover individual differences in response to IS.

The Impact of Standing Waves on Localization Ability of Low-Frequency Sound Sources

This paper studies the effect of room modal resonances on the localization of very low–frequency sound sources. A subjective listening test is conducted with 20 participants in an anechoic chamber, where the listener must detect the direction of the sound source for pure sinusoids at 31.5, 50, and 80 Hz. A synthetic standing wave pattern modeling a room resonant effect is created with two additional sound sources located at the left and right sides of the listener. Results show that the perception of low-frequency direction is negatively impacted by the node of the standing wave, even when the standing wave has a relatively low level, whereas the antinode does not have as strong of an effect. The second experiment conducted indicates that variations in the presentation level does not impact the effect of the standing wave. The results of this study suggest that in the low-frequency spectrum, direction judgement is not so strongly a question of this auditory system’s ability but more so of the acoustical properties of the listening environment.

Analysis of Low-Frequency Sound Absorption Performance and Optimization of Structural Parameters for Acoustic Metamaterials for Spatial Double Helix Resonators

Low-frequency noise absorbers often require large structural dimensions, constraining their development in practical applications. In order to improve space utilization, an acoustic metamaterial with a spatial double helix, called a spatial double helix resonator (SDHR), is proposed in this paper. An analytical model of the spatial double-helix resonator is established and verified by numerical simulations and impedance tube experiments. By comparing the acoustic absorption coefficients of the spatial double-helix resonator, it is shown that the results of the analytical model, the numerical model, and the experiments are in good agreement, proving the accuracy of the theoretical model. The effects of different structural parameters on the peak sound absorption coefficient and resonance frequency are quantitatively revealed. The impedance variation law of the model is obtained, and the resistance and reactance distributions at the resonance frequency are analyzed. In the optimization model, the Back Propagation (BP) network is used to construct the mapping between the structural parameters and the resonance frequency and sound absorption coefficient, and this is used as the constraints of the equation, which is combined with Wild Horse Optimization (WHO) to establish the BP-WHO optimization model to minimize the volume of the spatial double helix resonator. The results show that, for a given noise frequency, the optimized structural parameters enhance the space utilization without affecting the performance of the space double helix resonator.

Effect of scatterer shape, opening angle and periodicity on sound attenuation by local resonating sonic crystal

Noise Control has become critical and demanding task for acoustic engineers due to continuous Technological developments in construction, transportation, and industries. These developments have raised the level of low frequency noise in densely populated areas. Unfortunately, there cannot be sufficient noise reduction with traditional acoustic materials. However, new research has shown that the manipulation of sound waves and drastic reduction in sound transmission can be possible using periodic structure known as Sonic Crystals (SnC). This study describes the eigenfrequency analysis to investigate the effect of different shapes, periodicities, and opening angles of scatterers in a Local resonating Sonic Crystal (LRSnC). The Block-Floquet boundary condition is applied to the unit cell of the LRSnC, using the Finite Element Method to study the complex acoustic wave interactions throughout the structure. An acoustic module has been applied to find the band gap and to simulate transmission loss spectra in COMSOL Multiphysics. Results show that shape, opening angle and periodicity effect the band gap and transmission loss significantly. Based on these results, it is possible to develop advanced SnC with a wider band gap and higher sound attenuation in the lower sound frequency range by carefully considering these factors.

In-situ calibration for real-time infrasound station monitoring and improved wave parameter determination

Infrasound signals can be detected using a time-delay of arrival approach to derive the back azimuth and trace velocity of the coherent wave. For these calculations, it is necessary to have a calibrated measure of the pressure. Although the calibration of microbarometers can be performed in a laboratory setting and in the field with specific metrological means such as those developed by the CEA, it is much more difficult to determine the transfer function of the wind noise reduction systems (WNRS), designed to reduce the wind associated noise. In-situ calibration of these WNRS's can be performed using a co-located, calibrated reference sensor. System defects, such as flooded pipes or blocked inlets, have significant impacts on the response, which in turn would influence the calculated infrasonic wave parameters. These defects can be characterized using in-situ calibration measurements. Experiments were undertaken at the infrasound station IS26 as part of the EMPIR Infra-AUV project, using a temporary detector that was used to simulate defects on the WNRS. This allowed for the effects on real infrasound detections to be quantified and corrected using in-situ calibrations. Additionally, case studies at IMS stations were performed demonstrating the utility of these methods on operational infrasound stations.

Infrasound sensing: toward new measurement methods and controlled sources

The infrasound waves have already demonstrated their potential to characterize natural and man-made sources and to image the structure of atmosphere. These scientific acheivements have been driven mainly infrasound sensing by pressure sensor arrays deployed on the ground, with a strong contribution by permanent arrays developed in the framework of CTBT. However new infrasound sensing methods have been developed during the past two decades with very different concepts that allow to sense these waves at different altitudes in the atmosphere. We will recall a few key results associated with these new sensing methods on satellite and balloon platforms, as well as the ones using ionospheric perturbations. Concerning the infrasound sensing at ground level, we will explain how the infrasound waves can be monitored through ground movements and illustrate this method by the detection of infrasonic waves on Mars by SEIS seismometer of InSight NASA mission. Advantages and drawbacks of infrasound monitoring through ground movements will be presented, in particular the sensitivity to wind. Preliminary results comparing different infrasound sensing methods on the Earth will be presented. Eventually, we will also discuss shortly controlled infrasound sources and illustrate this discussion with recent experiments using burners as an infrasound source.

Probing a planet from the subsurface to the atmosphere with infrasound data

The analysis of infrasound waves has a significant potential for retrieving a range of geophysical parameters across various scales, such as atmospheric structures, characteristics of surface and buried sources, and seismic velocity structures. This potential was recently showcased in infrasound studies that illustrated the ability to retrieve Earth's shallow velocities and Mars' near-surface atmospheric winds from remote acoustic observations. Consequently, infrasound is becoming an essential component of planetary missions, providing insights into the interiors and atmospheres of other terrestrial planets in the solar system. However, utilizing infrasound data requires efficient forward wave simulation techniques and an accurate description of waveform sensitivity to source and medium parameters. Even under ideal conditions, many inverse problems associated with infrasound-based probing are inherently ill-posed, necessitating regularization or other approaches to ensure reliable results. In this contribution, we highlight recent seismo-acoustic research findings, addressing atmospheric probing at both smaller and global scales, as well as innovative methods to accelerate infrasonic wave propagation modeling.

Hearing abilities of a late-surviving archaeocete (Cetacea: Kekenodontidae), and implications for the evolution of sound in Neoceti.

Kekenodontids are the only known archaeocetes (stem cetaceans) from the late Oligocene. They possess a unique combination of morphological features seen in both more primitive Eocene basilosaurid archaeocetes and more derived Neoceti (mysticetes and odontocetes). However, much remains unknown about the clade, including its acoustic biology. Based on its phylogenetic position crownward to basilosaurids as the latest-diverging archaeocete, we hypothesize that kekenodontids would be specialized for hearing low-frequency sounds. Here, we provide the first report on the cochlear anatomy of a kekenodontid using the holotype of Kekenodon onamata from New Zealand. We compare the cochlear morphology of K. onamata to a sample of extinct and extant cetaceans and quantify shape differences using three-dimensional geometric morphometrics. The analyses show that K. onamata was indeed adapted to hear low frequencies and suggests low-frequency hearing may be a characteristic of raptorial macrophagous fossil cetaceans in contrast to infrasonic bulk filter-feeding mysticetes and ultrasonic echolocating odontocetes.

Frequency dependence and harmonic distortion of stapes displacement and intracochlear pressure in response to very high level sounds

Previous reports have suggested that intracochlear pressures (PIC) measured at the base of the cochlea increase directly proportionally with stapes displacement (DStap) in response to moderately high (<130 dB SPL) level sounds. Consistent with this assumption, we have reported that for low frequency sounds (<1 kHz), stapes displacement and intracochlear pressures increase linearly with sound pressure level (SPL) for moderately high levels (<130 dB SPL), but saturate at higher exposure levels (>130 dB SPL). However, the magnitudes of each response were found to be frequency dependent, thus the relationship between DStap and PIC may vary at higher frequencies or higher levels.In order to further examine this frequency and level dependence, measurements of DStap and PIC were made in cadaveric human temporal bones prepared with a mastoidectomy and extended facial recess to expose the ossicular chain. PIC was measured in scala vestibuli (PSV) and scala tympani (PST) simultaneously with SPL in the external auditory canal (PEAC) and laser Doppler vibrometry (LDV) measurements of stapes velocity (VStap). Consistent with prior reports, DStap and PSV increased proportionally with sound pressure level in the ear canal up to a frequency-dependent saturation point, above which both DStap and PSV showed a distinct deviation from proportionality with PEAC, suggesting that their relationship may remain constant at these high frequencies. Likewise, while the asymptotic value, and SPL at which saturation occurred were frequency dependent in both DStap and PSV, the reduction in gain with increasing SPL above this level was constant above this level at all frequencies, and the magnitude of responses at harmonics of the driving frequency increased with increasing level, consistent with harmonic distortion via peak clipping. Importantly, this nonlinear distortion shifts the energy arriving at the inner ear to higher frequencies than are present in incident stimulus, thus exposing the high frequency sensitive components of the auditory system to more noise than would be expected from measurement of that stimulus on its own. Overall, responses suggest that the cochlear representation of very high-level air conducted stimuli is limited by nonlinearities in the middle ear, and that this peak limiting leads to increased high frequency cochlear exposures than are present in the driving stimulus.

Sound absorption performance of honeycomb metamaterials Inspired by Mortise-and-Tenon structures

To address the limitations of traditional honeycomb sandwich structures in attenuating mid to low-frequency sounds, particularly in configurations with minimal thickness and weight, this study introduces an innovative honeycomb acoustic metamaterial incorporating the traditional Chinese mortise-and-tenon joint. We systematically investigate the acoustic absorption characteristics of the modified honeycomb structure through theoretical analysis, empirical validation, and numerical simulations. Our experimental setup maintained consistent geometric parameters across all trials and demonstrated that the resonance frequency of the modified honeycomb structure decreased by 10 % relative to its conventional counterpart. We conducted detailed analyses on the influence of micropore positioning, tenon geometric dimensions, and micropore diameters on the acoustic performance. Notably, elongating the tenon from 2 mm to 6 mm resulted in a 15 % reduction in resonance frequency, whereas increasing the micropore-to-tenon distance from 0 mm to 4 mm led to a 30 % increase. The integration of the mortise-and-tenon joint significantly enhances the mid to low-frequency sound absorption performance of the honeycomb panels. This improvement is achieved while preserving the structural benefits of low panel thickness and shallow cavity depth, alongside simplified processing of micropores. Our findings elucidate a promising approach to augmenting the acoustic properties of lightweight structural materials, thereby extending their application potential in noise control engineering. This study not only contributes a novel perspective to the design and optimization of acoustic metamaterials but also highlights the potential for integrating traditional architectural techniques with modern material science to enhance noise control solutions.

Infrasound associated with the eruption of the Hunga volcano.

On 13-15 January 2022, the Hunga Tonga-Hunga Ha'apai underwater volcano erupted. This powerful eruption generated infrasonic waves with amplitudes of thousands of Pascals in the near field. The ground infrasonic stations in China, located approximately 10 000 km from the Hunga volcano, also received waves with frequencies from 0.01 to 0.05 Hz. However, the amplitude reached 17 Pa, which is higher than the predicted amplitude using the absorption model without considering the dispersion effect in the thin thermosphere. At high altitudes, dispersion exists and the sound speed depends on the ratio of the molecular mean collision ratio to sound frequency, which is proportional to the ratio (frequency/pressure). And attenuation coefficients are complex to model. We simulate dispersive sound speeds and attenuation coefficients at different frequencies according to theory and our experimental data. In the thermosphere, the dispersion effect causes noticeable changes of sound speed and then affects wave propagation paths in the far field. The abnormal attenuation coefficient has a smaller impact on thermospheric returns than that of the dispersive sound speed, but it is also not negligible. It explains the large amplitude of thermospheric signals received in our infrasound stations. This article is part of the theme issue 'Celebrating the 15th anniversary of the Royal Society Newton International Fellowship'.

Nylon/PVDF Spacer Fabric with Acoustic-Electric Conversion and Yarn Resonance Effect for Improved Low-Frequency Sound Absorption Property

Nylon/PVDF Spacer Fabric with Acoustic-Electric Conversion and Yarn Resonance Effect for Improved Low-Frequency Sound Absorption Property

Low-frequency sounds combined with motor imagery elicits a transient disruption of force performance: A path to neuromotor reprogramming?

The effectiveness of motor imagery (MI) training on sports performance is now well-documented. Recently, it has been proposed that a single session of MI combined with low frequency sound (LFS) might enhance muscle activation. However, the neural mechanisms underlying this effect remain unknown. We set up a test-retest intervention over the course of 2 consecutive days to evaluate the effect of (i) MI training (MI, n = 20), (ii) MI combined with LFS (MI + LFS, n = 20), and (iii) a control condition (CTRL, n = 20) on force torque produced across repeated maximal voluntary contractions of the quadriceps before (Pretest), after (Posttest) and at +12 h (Retention) post-intervention. We collected the integrated electromyograms of the quadriceps muscles, as well as brain electrical potentials during each experimental intervention. In the CTRL group, total force torque decreased from Pretest to Retention and from Posttest to Retention. By contrast, there was an increase between Posttest and Retention in both MI + LFS and MI groups (both ηP2 = 0.03, p < 0.05). Regression analyses further revealed a negative relationship between force performance and EEG activity in the MI + LFS group only. The data support a transient interference of LFS on cortical activity underlying the priming effects of MI practice on force performance. Findings are discussed in relation to the potential for motor reprogramming through MI combined with LFS.

Modeling a low-frequency sound absorber consisting of a granular activated carbon stack backed by a poro-elastic layer

High surface area particles, like granular activated carbon (GAC), have shown advantages in absorbing low-frequency sounds by themselves and when combined with other treatments. In this article, a novel sound absorption treatment consisting of a high surface area particle stack supported by a soft, porous layer is described. It was first experimentally observed from impedance tube measurements that the low-frequency absorption performance of GAC stacks can be significantly enhanced by inserting a melamine foam between the stack and a rigid backing. To analytically model this type of sound absorbing treatment, the interfaces between particle stacks and other materials were characterized. Further, a 1-D layered transfer-matrix approach and a 2-D axi-symmetric finite-difference approach were implemented to predict the measured absorption spectra. Because of the constraint of the stack at the impedance tube wall, the 2-D axi-symmetric model leads to more accurate absorption spectrum predictions, particularly at low frequencies. However, the difference between the two model predictions becomes negligible when applied to large-area treatments. Thus, the simpler and faster 1-D theory can be valuable for optimizing large-area sound packages. In addition, by combining both granular and porous materials, it may be possible to design sound-absorbing metamaterials that perform well at low frequencies.

BASSA: New software tool reveals hidden details in visualisation of low-frequency animal sounds.

The study of animal sounds in biology and ecology relies heavily upon time-frequency (TF) visualisation, most commonly using the short-time Fourier transform (STFT) spectrogram. This method, however, has inherent bias towards either temporal or spectral details that can lead to misinterpretation of complex animal sounds. An ideal TF visualisation should accurately convey the structure of the sound in terms of both frequency and time, however, the STFT often cannot meet this requirement. We evaluate the accuracy of four TF visualisation methods (superlet transform [SLT], continuous wavelet transform [CWT] and two STFTs) using a synthetic test signal. We then apply these methods to visualise sounds of the Chagos blue whale, Asian elephant, southern cassowary, eastern whipbird, mulloway fish and the American crocodile. We show that the SLT visualises the test signal with 18.48%-28.08% less error than the other methods. A comparison between our visualisations of animal sounds and their literature descriptions indicates that the STFT's bias may have caused misinterpretations in describing pygmy blue whale songs and elephant rumbles. We suggest that use of the SLT to visualise low-frequency animal sounds may prevent such misinterpretations. Finally, we employ the SLT to develop 'BASSA', an open-source, GUI software application that offers a no-code, user-friendly tool for analysing short-duration recordings of low-frequency animal sounds for the Windows platform. The SLT visualises low-frequency animal sounds with improved accuracy, in a user-friendly format, minimising the risk of misinterpretation while requiring less technical expertise than the STFT. Using this method could propel advances in acoustics-driven studies of animal communication, vocal production methods, phonation and species identification.

Medial superior olive in the rat: Anatomy, sources of input and axonal projections

Although rats and mice are among the preferred animal models for investigating many characteristics of auditory function, they are rarely used to study an essential aspect of binaural hearing: the ability of animals to localize the sources of low-frequency sounds by detecting the interaural time difference (ITD), that is the difference in the time at which the sound arrives at each ear. In mammals, ITDs are mostly encoded in the medial superior olive (MSO), one of the main nuclei of the superior olivary complex (SOC). Because of their small heads and high frequency hearing range, rats and mice are often considered unable to use ITDs for sound localization. Moreover, their MSO is frequently viewed as too small or insignificant compared to that of mammals that use ITDs to localize sounds, including cats and gerbils. However, recent research has demonstrated remarkable similarities between most morphological and physiological features of mouse MSO neurons and those of MSO neurons of mammals that use ITDs. In this context, we have analyzed the structure and neural afferent and efferent connections of the rat MSO, which had never been studied by injecting neuroanatomical tracers into the nucleus.The rat MSO spans the SOC longitudinally. It is relatively small caudally, but grows rostrally into a well-developed column of stacked bipolar neurons. By placing small, precise injections of the bidirectional tracer biotinylated dextran amine (BDA) into the MSO, we show that this nucleus is innervated mainly by the most ventral and rostral spherical bushy cells of the anteroventral cochlear nucleus of both sides, and by the most ventrolateral principal neurons of the ipsilateral medial nucleus of the trapezoid body. The same experiments reveal that the MSO densely innervates the most dorsolateral region of the central nucleus of the inferior colliculus, the central region of the dorsal nucleus of the lateral lemniscus, and the most lateral region of the intermediate nucleus of the lateral lemniscus of its own side. Therefore, the MSO is selectively innervated by, and sends projections to, neurons that process low-frequency sounds. The structural and hodological features of the rat MSO are notably similar to those of the MSO of cats and gerbils. While these similarities raise the question of what functions other than ITD coding the MSO performs, they also suggest that the rat MSO is an appropriate model for future MSO-centered research.

Unveiling nature’s beat: analyzing the acoustics of an aquatic bug in relation to urban sounds

Anthropophony is a prominent component of soundscapes worldwide and is known to impact biota. While responses to anthropophony in terrestrial and marine animals have been relatively well-studied, there is still a lack of knowledge regarding freshwater animals. In fact, freshwater taxa are among the possibly most threatened groups, and unveiling the reasons for their threat is crucial. We investigated the effect of low-frequency sounds -usually associated with anthropophony- on the stridulation of Krizousacorixa femorata, a common water bug in Mexico City. Using aerial recordings, we estimated the Normalized Difference Soundscape Index (NDSI), which is the most commonly used index to measure anthropophony, to characterize soundscapes in six city sites throughout the year. Additionally, from underwater recordings in the same sites, we obtained the peak frequency (Pf) of the stridulations, as it is the frequency with the highest energy and, therefore, the one that can travel the farthest and can be identified even in the presence of overlapping sounds. Finally, we evaluated the relationships between soundscapes and Pf through a mixed linear model. There was a negative correlation between NDSI and Pf, indicating higher-pitched stridulations at sites with dominant anthropophony. While we cannot rule out other factors contributing to stridulation variation, we remain uncertain about how low-frequency sounds impact freshwater ecosystems and the intricate relationship between soundscapes and aquatic life in urban settings.