Low-frequency Electromagnetic Waves Research Articles

Rational construction of dicarbonous CB/CNT@PI composites toward low filler loading and low-frequency electromagnetic wave absorption.

With the application of low frequency radar and the demand for stealth of high temperature resistant components, it is increasingly urgent to develop absorbing materials with both low frequency and high temperature resistant properties. Here, we successfully prepared various carbon/polyimide composites as low-frequency electromagnetic wave absorbing materials by simple blending method. The well-designed mesh lap structure introduces a large amount of free space, further optimizing the impedance matching of the material. At the same time, the multiple loss mechanism formed by the combination of carbon black dominated polarization and carbon nanotube dominated conductive loss enhances the loss of incident electromagnetic wave. The results showed that only 10 wt% filler loading of the CB/CNT@PI is achieved in the low frequency range (1-4 GHz) with a minimum RL strength of - 18.3 dB, which has obvious advantages compared with other works in recent years. This study provides a way for the design and preparation of resin-based absorbing materials.

Coherent Inverse Compton Scattering in Fast Radio Bursts Revisited

Growing observations of temporal, spectral, and polarization properties of fast radio bursts (FRBs) indicate that the radio emission of the majority of bursts is likely produced inside the magnetosphere of its central engine, likely a magnetar. We revisit the idea that FRBs are generated via coherent inverse Compton scattering (ICS) off low-frequency X-mode electromagnetic waves (fast magnetosonic waves) by bunches at a distance of a few hundred times the magnetar radius. The following findings are revealed: (1) Crustal oscillations during a flaring event would excite kHz Alfvén waves. Fast magnetosonic waves with essentially the same frequency can be generated directly or be converted from Alfvén waves at a large radius, with an amplitude large enough to power FRBs via the ICS process. (2) The cross section increases rapidly with radius and significant ICS can occur at r ≳ 100R ⋆ with emission power much greater than the curvature radiation power but still in the linear scattering regime. (3) The low-frequency fast magnetosonic waves naturally redistribute a fluctuating relativistic plasma in the charge-depleted region to form bunches with the right size to power FRBs. (4) The required bunch net charge density can be sub-Goldreich–Julian, which allows a strong parallel electric field to accelerate the charges, maintain the bunches, and continuously power FRB emission. (5) This model can account for a wide range of observed properties of repeating FRB bursts, including high degrees of linear and circular polarization and narrow spectra as observed in many bursts from repeating FRB sources.

Research on extremely low frequency electromagnetic wave model and simulation in wellbore communication

Over recent years, as digitalization and intelligence in oil wellbore have increased, so have the stricter requirements for wireless communication technology in terms of distance, accuracy, and portability. As a result, it’s necessary to rely on more advanced and efficient wireless communication technologies to meet the industry’s needs. However, traditional communication technologies such as cables and optical fibers have inherent shortcomings in construction, data interpretation, and cost. ELF electromagnetic waves are an ideal solution for communication in complex wellbore conditions due to long-distance communication and strong penetration capabilities, making it a highly effective option. Based on the theory of network splitting, this paper establishes a polygonal multiple-delays uncertainty coupled complex network model of ELF electromagnetic waves propagating through the casing in layered media and designs a controller, including expressions for the intensity of the magnetic and electric fields in different directions, and the propagation and distribution characteristics in different media. We determined that the optimal transmitting frequency of ELF electromagnetic waves under general conditions is 12.7 Hz. Based on field experiments, we verified that ELF electromagnetic waves can enable wireless wellbore communication within 1500 m without relays. We also analyzed the impact of casing thread deformation on ELF electromagnetic wave propagation due to high-temperature and high-pressure environments. We used simulation experiments to solve the distribution relationship between the electric and magnetic fields of the solenoids through casing and strata, as well as the coupling coefficients between the transmitting and receiving solenoids, and explore how different transmitting frequencies affect the efficiency of signal propagation. Both theories and experiments have verified the correctness of the model, and have also demonstrated the reliability and continuity of using ELF electromagnetic waves to achieve wireless wellbore communication, which provides a theoretical basis and feasibility for subsequent engineering applications.

Low-frequency and broadband electromagnetic wave absorption mechanism of (Hf0.2Zr0.2Ti0.2Ce0.2La0.2)C1-δ/PyC microspheres with hierarchy pores from 4 GHz to 17 GHz

Achieving low-frequency broadband electromagnetic wave absorption in extreme environments over 2000 °C is challenging. Biomimetic hierarchy materials of high entropy lanthanide carbides were designed to optimize electromagnetic wave absorption. Composite microspheres of (Hf0.2Zr0.2Ti0.2Ce0.2La0.2)C1-δ and SiC embedded in pyrolytic carbon (MC/PyC) were prepared by using the electro-spray method followed by heat treatment. The specimens of MC/PyC microspheres with a thickness of 2.5 mm exhibited a minimum reflection loss value of − 48.9 dB, and electromagnetic wave absorption from 4.0 GHz to 17 GHz. The enhanced absorption capability is attributed to the synergistic effect of dielectric losses from conduction and polarization, along with magnetic losses due to eddy currents and natural resonance of the high-entropy carbides within the multiscale pores. The composition and featured microstructure MC/PyC microspheres were noteworthily stable under the 2200 °C oxyacetylene ablation, ensuring consistent high-performance electromagnetic wave absorption even in harsh conditions.

In Situ Exsolution-Prepared Solid-Solution-Type Sulfides with Intracrystal Polarization for Efficient and Selective Absorption of Low-Frequency Electromagnetic Wave.

The excellent dielectric properties and tunable structural design of metal sulfides have attracted considerable interest in realizing electromagnetic wave (EMW) absorption. However, compared with traditional monometallic and bimetallic sulfides that are extensively studied, the unique physical characteristics of solid-solution-type sulfides in response to EMW have not been revealed yet. Herein, a unique method for preparing high-purity solid-solution-type sulfides is proposed based on solid-phase in situ exsolution of different metal ions from hybrid precursors. Utilizing CoAl-LDH/MIL-88A composite as a precursor, Fe0.8Co0.2S single-phase nanoparticles are uniformly in situ formed on an amorphous substrate (denoted as CoAl), forming CoAl/Fe0.8Co0.2S heterostructure. Combing with density functional theory (DFT) calculations and wave absorption simulations, it is revealed that Fe0.8Co0.2S solid solution has stronger intracrystal polarization and electronic conductivity than traditional monometallic and bimetallic sulfides, which lead to higher dielectric properties in EM field. Therefore, CoAl/Fe0.8Co0.2S heterostructure exhibits significantly enhanced EMW absorption ability in the low-frequency region (2-6GHz) and can achieve frequency screening by selectively absorbing EMW of specific frequency. This work not only provides a unique method for preparing high-purity solid-solution-type sulfides but also fundamentally reveals the physical essence of their excellent EMW absorption performance.

A Bionic Flapping Magnetic-Dipole Resonator for ELF Cross-Medium Communication.

Extremely low-frequency (ELF) electromagnetic (EM) waves adeptly propagate in harsh cross-medium environments, overcoming rapid decay that hinders high-frequency counterparts. Traditional antennas, however, encounter challenges concerning size, efficiency, and power. Here, drawing inspiration from nature, we present a groundbreaking piezo-actuated, bionic flapping-wing magnetic-dipole resonator (BFW-MDR), operating in the electro-mechano-magnetic coupling mechanism, designed for efficient ELF EM wave transmission. The unique rigid-flexible hybrid flapping-wing structure magnifies rotation angles of anti-phase magnetic dipoles by tenfold, leading to constructive superposition of emitted magnetic fields. Consequently, the BFW-MDR exhibits a remarkable quality factor of 288 and an enhanced magnetic field emission of 514 fT at 100 meters with only 6.9 mW power consumption, surpassing traditional coil antennas by three orders of magnitude. The communication rate is doubled by the ASK+PSK modulation method. Its robust performance in cross-medium communication, even amidst various interferences, underscores its potential as a highly efficient antenna for underwater and underground applications.

Construction of CoO/Co9S8/NC composites with low-frequency and broadband electromagnetic wave absorption

Low-frequency electromagnetic wave absorption (EMWA) materials were crucial for addressing electromagnetic pollution and radar stealth. However, achieving low-frequency and broadband absorption still faces challenges. In this work, a succession of CoO/Co9S8/N-doped carbon (NC) composites were fabricated via a partial sulfidation strategy of Co-Prussian blue analogue (Co-PBA). The as-prepared CoO/Co9S8/NC composites featured a porous architecture. The electromagnetic parameters were effectively modulated via varying the sulfidation time. When the sulfidation time was 9 h, the minimum reflection loss (RLmin) value was −50.40 dB at 2.93 mm and a maximum effective absorption bandwidth value was 5.76 GHz (12.24–18.00 GHz) at 1.80 mm. Notably, when the sulfidation time was 12 h, the composites exhibited enhanced EMWA capability in the low-frequency S-band (3.52 GHz) with an RLmin value of −28.91 dB. The superior EMWA performance of composites were primarily attributed to appropriate dielectric constants and optimized impedance matching due to magnetic loss. Moreover, the radar cross section simulation consequences further verified that dissipation capability of electromagnetic wave of the CoO/Co9S8/NC composites in the actual far field. This work afforded novel perspectives into the rational develop of PBA-derived carbon-based EMWA materials with the low-frequency and broadband absorption.

Well-Dispersed CoNiO2 Nanosheet/CoNi Nanocrystal Arrays Anchored onto Monolayer MXene for Superior Electromagnetic Absorption at Low Frequencies

Developing microwave absorbers with superior low-frequency electromagnetic wave absorption properties is one of the foremost important factors driving the boom in 5G technology development. In this study, via a simple hydrothermal and pyrolysis strategy, randomly interleaved CoNiO2 nanosheets and uniformly ultrafine CoNi nanocrystals are anchored onto both sides of a single-layered MXene. The absorption mechanism demonstrated that the hierarchical heterostructure prevents the aggregation of MXene nanoflakes and magnetic crystallites. In addition, the introduction of the double-magnetic phase of CoNiO2/CoNi arrays can not only enhance the magnetic loss capacity but also generate larger void spaces and abundant heterogeneous interfaces, collectively promoting impedance-matching and furthering microwave attenuation capabilities at a low frequency. Hence, the reflection loss of the optimal absorber (M–MCNO) is −45.33 dB at 3.24 GHz, which corresponds to a matching thickness of 5.0 mm. Moreover, its EAB can entirely cover the S-band and C-band by tailoring the matching thickness from 2 to 7 mm. Satellite radar cross-section (RCS) simulations demonstrated that the M–MCNO can reduce the RCS value to below −10 dB m2 over a multi-angle range. Thus, the proposed hybrid absorber is of great significance for the development of magnetized MXene composites with superior low-frequency microwave absorption properties.

Piezo‐Turned Magnet Rotation for ELF/SLF Cross‐Medium Communication in Omni‐Direction

AbstractExtremely/super low frequency (ELF/SLF) electromagnetic (EM) waves offer efficient propagation in challenging cross‐medium environments. However, conventional coil antennas, when emitting ELF/SLF EM waves, face constraints related to size, radiation efficiency, and high power consumption. To overcome these limitations, a disc‐rod structured piezoelectric rotating resonator is proposed, which can turn a NdFeB permanent magnet disc into rotation with an impressive high‐speed up to 10 000 r min−1 via wobbling motion of the rod tip, effectively generating ELF/SLF magnetic field radiation via rotational oscillation other than common linear and swinging oscillation of the magnetic dipole moments. The piezo‐turned magnetic rotation (PTMR) method leads to a two to five‐fold enhancement in magnetic field emission compared to existing piezo‐actuated acoustic resonant antennas, and a 370 times higher emitting efficiency compared to the traditional coil antenna with a comparable size. In contrast to unidirectional EM wave radiation at their solely resonant frequencies, the PTMR antenna showcases omnidirectional B‐field radiation with continuous tunability in a dual frequency band spanning from 10 to 100 Hz. Moreover, an air–seawater cross‐medium magnetic field communication is successfully demonstrated. With outstanding performance metrics, the PTMR antenna emerges as a promising solution for efficient long‐distance ELF/SLF cross‐medium communication.

Initial Experimental Results on Ion Cyclotron Resonance Heating Selectively Mixed Low Z Ions to Enhance Production Efficiency of Multicharged Ions on Electron Cyclotron Resonance Ion Source

According to the accessibility conditions of wave propagation in the magnetized plasma of an electron cyclotron resonance (ECR) ion source (ECRIS), it is speculated that the essential factor that determines the limitations in the multiply charged ion currents is the left-hand polarization wave cutoff (L-cutoff). It is necessary to overcome this limitation, we proposed the introduction of ion cyclotron resonance (ICR) or lower hybrid resonance (LHR) by lower frequency waves. We conduct heating low-mass ions selectively in enhanced producing multiply charged ion by mixing low-mass element gas, which has been conventionally performed in ECRIS, or relaxation of the potential well based on the existence of resonant electron particles by ECR. This paper will describe the initial experimental results of ICR application by introducing low-frequency RF electromagnetic waves in the ECRIS.

Initial Experimental Results of Producing Multicharged Ions Efficiently by Lower Hybrid Resonance Heating with Exciting Helicon Waves on Electron Cyclotron Resonance Ion Source

Based on experimental results, we considered the accessibility conditions for wave propagation in the magnetized plasma in an electron cyclotron resonance (ECR) ion source (ECRIS), and proposed introducing electromagnetic waves with frequencies lower than those of ECR. We generate the lower hybrid resonance (LHR) in the ECRIS by the electric field of the extra-ordinary mode (X-mode) on the helicon wave which additionally heat the electrons, and then it was conducted to improve the efficiency of multicharged ion generation successfully in over density condition. The electron energy distribution function obtained by the probe measurement shows an increase in the high-energy region in the corresponding LHR region. In this paper, for the first time we describe the initial experimental results on enhanced production of multicharged ions by the LHR of the low-frequency RF electromagnetic waves into the ECRIS.

Interface-induced dual-pinning mechanism enhances low-frequency electromagnetic wave loss

Improving the absorption of electromagnetic waves at low-frequency bands (2-8 GHz) is crucial for the increasing electromagnetic (EM) pollution brought about by the innovation of the fifth generation (5G) communication technology. However, the poor impedance matching and intrinsic attenuation of material in low-frequency bands hinders the development of low-frequency electromagnetic wave absorbing (EMWA) materials. Here we propose an interface-induced dual-pinning mechanism and establish a magnetoelectric bias interface by constructing bilayer core-shell structures of NiFe2O4 (NFO)@BiFeO3 (BFO)@polypyrrole (PPy). Such heterogeneous interface could induce distinct magnetic pinning of the magnetic moment in the ferromagnetic NFO and dielectric pinning of the dipole rotation in PPy. The establishment of the dual-pinning effect resulted in optimized impedance and enhanced attenuation at low-frequency bands, leading to better EMWA performance. The minimum reflection loss (RLmin) at thickness of 4.43 mm reaches -65.30 dB (the optimal absorption efficiency of 99.99997%), and the effective absorption bandwidth (EAB) can almost cover C-band (4.72 ~ 7.04 GHz) with low filling of 15.0 wt.%. This work proposes a mechanism to optimize low-frequency impedance matching with electromagnetic wave (EMW) loss and pave an avenue for the research of high-performance low-frequency absorbers.

Combustion-Assisted construction of Defect-Enriched hierarchical carbon composites towards efficient Low-Frequency electromagnetic wave absorption

Due to the high intrinsic conductivity of graphitized carbon-based composite materials, it induces a serious skin effect of incident electromagnetic waves, which deteriorates impedance matching and limits the wave absorption performance in the low-frequency regions. The introduction of defects can change the electrical and physical and chemical properties of carbon-based materials, affect the density of skin current, and thereby improve the overall performance of carbon-based absorbers. Therefore, it is important to develop a simple, low-cost, and fast preparation method for defect-rich structures. Herein, the defect-enriched hierarchical composites have been synthesized successfully via the soaking-burning-annealing process. The combustion treatment introduced numerous defects and oxygen vacancies while inducing a non-graphitization transition that reduced conductivity and improved electromagnetic balance in the low-frequency region. As expected, the charred sample exhibited notable enhancements in reflection loss (RL) and the effective absorption bandwidth within the low-frequency range of 2–8 GHz. The value of RL reached −52.2 dB, marking a 199 % increase over the unburned sample, while the effective absorption bandwidth increased by 28 % to 2.70 GHz. Even at a filling rate of only 10 %, the RLmin values of the optimal sample were lower than −30 dB across the S, C, X, and Ku bands. Additionally, the combination-induced defects led to phonon scattering, thereby reducing the thermal conductivity of the material. Thus, combustion can enhance the low-frequency microwave properties and thermal insulation of carbon-layered composites.

Low-frequency whistler waves driven by energetic electrons in plasmas of solely electron cyclotron wave heating

Whistler waves are a type of low-frequency electromagnetic wave common in nature, which is usually associated with energetic electron phenomena. This study presents experimental observations of low-frequency whistler wave instabilities driven by energetic electrons through wave–particle interactions on EXL-50. The energetic electrons are generated by electron cyclotron waves (ECWs) through stochastic heating [Wang et al., J. Plasma Phys. 89, 905890603 (2023)] and do not match the characteristics of the runaway electrons [Shi et al., Nucl. Fusion 62, 086047 (2022)]. In the steady-state plasma of the Energy iNNovation XuanLong-50 (EXL-50), whistler waves within the 30–120 MHz frequency range were observed during electron cyclotron resonance heating. These waves displayed multiple frequency bands, and the frequencies of waves were directly proportional to the Alfvén velocity. Furthermore, it was interesting to find that superposition of lower hybrid wave into ECW resulted in the suppression of these whistler waves. The experimental results may indicate that the whistler waves are driven by energetic electrons (excluding runaway electrons). These discoveries carry significant implications for several areas of research, including the investigation of wave–particle interactions, the development of radio frequency wave current drivers, their potential impact on the electron dynamics in future fusion devices, and even the presence of unusually low-frequency whistler waves in Earth's radiation belts.

Diagnosing ratio of electron density to collision frequency of plasma surrounding scaled model in a shock tube using low-frequency alternating magnetic field phase shift

A non-contact low-frequency (LF) method of diagnosing the plasma surrounding a scaled model in a shock tube is proposed. This method utilizes the phase shift occurring after the transmission of an LF alternating magnetic field through the plasma to directly measure the ratio of the plasma loop average electron density to collision frequency. An equivalent circuit model is used to analyze the relationship of the phase shift of the magnetic field component of LF electromagnetic waves with the plasma electron density and collision frequency. The applicable range of the LF method on a given plasma scale is analyzed. The upper diagnostic limit for the ratio of the electron density (unit: m−3) to collision frequency (unit: Hz) exceeds 1 × 1011, enabling an electron density to exceed 1 × 1020 m−3 and a collision frequency to be less than 1 GHz. In this work, the feasibility of using the LF phase shift to implement the plasma diagnosis is also assessed. Diagnosis experiments on shock tube equipment are conducted by using both the electrostatic probe method and LF method. By comparing the diagnostic results of the two methods, the inversion results are relatively consistent with each other, thereby preliminarily verifying the feasibility of the LF method. The ratio of the electron density to the collision frequency has a relatively uniform distribution during the plasma stabilization. The LF diagnostic path is a loop around the model, which is suitable for diagnosing the plasma that surrounds the model. Finally, the causes of diagnostic discrepancy between the two methods are analyzed. The proposed method provides a new avenue for diagnosing high-density enveloping plasma.

Research on electromagnetic field characteristics of rotating-magnet based mechanical antenna through the earth

Conventional low-frequency electromagnetic wave (LFEM) transmitting antennas are enormous in size, which limits the application of LFEM in underground space. Rotating-magnet Based Mechanical Antennas can realize the miniaturization of low-frequency antennas, which is expected to bring new possibilities for underground electromagnetic detection or ground penetration communication. Firstly, this paper establishes a synthetic field method for solving the electromagnetic field of a rotating permanent magnet in the air-earth cross-domain case. The method equates the magnet as an orthogonal superposition of vertical and horizontal dipole sources, and the phase difference between vertical and horizontal dipole sources is 𝜋/2. Based on the half-space theory of multilayer planar media, the quasi-analytical solution of the electromagnetic field of the magnetic dipole in the case of air-earth trans dimensionality can be found by superposition. Secondly, based on the finite element numerical model, the trans-earth propagation characteristics of the electromagnetic field excited by the rotating permanent magnet across the air-earth dual domain are studied. At the same time, the radiation characteristics in the rotating plane of the permanent magnet are also studied. Again, this paper systematically investigates the influence of parameters such as earth conductivity, emission frequency, and propagation distance on the electromagnetic field propagation. Finally, the principle prototype is developed and experiments are carried out. The results show that the finite element numerical model established in this paper is correct, the experimental results are consistent with the theoretical values, and a field strength signal of 0.9 nT can be received at 20 m. The research work in this paper lays the foundation for the future use of mechanical antennas for electromagnetic detection and ground penetration communication.

Parasitic modulation effect caused by dynamic plasma in low frequency

Abstract-dynamic plasma sheath can severely interfere with the communication of hypersonic vehicles during atmospheric reentry. Theoretical and experimental results show that low-frequency (LF) electromagnetic (EM) waves could penetrate the plasma sheath, building a feasible method to solve the “radio blackout” problem. This paper discovers that the propagation of LF EM waves in plasmas is still influenced by parasitic modulation effects. Compared to microwave frequencies, the impact of parasitic modulation effects on signal modulation patterns is more distinct for LF EM waves. In contrast to the microwave frequency range, where the rotation direction of QPSK signal constellation points changes with the ratio of plasma frequency to electromagnetic wave frequency, in the LF range, the constellation points undergo limited clockwise rotation. This phenomenon can be attributed to the unique magnetic field propagation mechanism of LF EM waves in dynamic plasmas. This paper analyzes the mechanism of this specific parasitic modulation effect and discovers a sinusoidal transformation relationship between amplitude attenuation and phase shift. Meanwhile, the experimental and simulation results proved that the time-varying plasma could cause the parasitic modulation effect of LF EM wave, resulting in a limited clockwise rotation of orthogonal phase-shift keying constellation points, which is consistent with the theoretical analysis.

A simple co-doping strategy to synthesis of Ni@B/N carbon nanotubes with broadband and low-frequency electromagnetic wave absorption

Development of magnetic composites with rational microstructural design to achieve excellent electromagnetic wave (EMW) absorption in the low-frequency range is necessary and still challenging. Herein, the B/N carbon nanotubes loaded with Ni nanoparticles were successfully synthesized through a homogeneous precursor pyrolysis route. The homogeneity of the micro-magnetic field in the composite architecture is improved by the co-doping of B and N in carbon nanotubes due to the polarization effect, which would enhance the impedance matching and EMW absorption. The Ni@B/N carbon nanotubes exhibit a minimum reflection loss (RLmin) of −56.9 dB at 8.24 GHz with a maximum bandwidth of 7.12 GHz ranging almost all S and C bands (from 3.44 to 10.56 GHz) suggesting that the composite architecture effectively enhances low-frequency EMW absorption properties. The combination of impedance matching and interfacial polarization resulting from the homogeneous Ni nanoparticles and co-doping of B and N in carbon lattice structure is responsible for the enhanced low-frequency EMW absorption properties. This simple co-doping synthesis strategy provides a new design strategy for the preparation of broadband and low-frequency EMW absorbers.

On the possibility of mode coupling for low frequency electromagnetic waves in plasmas with anisotropy of temperature

We study the dispersion relation for low frequency electromagnetic waves propagating along the ambient magnetic field and investigate the possibility of occurrence of coupling between waves in the ion cyclotron branch and waves in the whistler branch. The results obtained show that the coupling may occur in the case of conditions leading to the ion cyclotron instability, for sufficiently high value of the ratio between perpendicular and parallel ion temperature, and does not occur in the case of conditions leading to the ion firehose instability. The results also show that the decrease in the value of the plasma beta may lead to the disappearance of the mode coupling conditions. Regarding the effect of the electron population, it is shown that the change in the shape of the electron velocity distribution, from Maxwellian to bi-Kappa form, does not change the results obtained, as long as the electron temperatures are isotropic, but the increase in anisotropy in the electron temperatures may lead to the disappearance of the coupling between the different waves. The consequences of the frequency dependency of the mode coupling conditions are discussed considering wave propagation in an inhomogeneous medium, leading to the conclusion that the energy of a packet of waves of a given mode can be absorbed or mode converted over an extended region of space. These findings can be of relevance for the analysis and understanding of processes related to the conversion between ion cyclotron waves and whistler waves.

Energizing Healing with Electromagnetic Field Therapy in Musculoskeletal Disorders.

There is mounting evidence to suggest that exogenous electromagnetic fields (EMF) may play a significant role in various biological processes that are crucial to therapeutic interventions. EMFs have been identified as a non-invasive, safe, and effective therapy that appears to have no apparent side effects. Numerous studies have demonstrated that pulsed EMFs (PEMFs) have the potential to become a stand-alone or adjunctive treatment modality for managing musculoskeletal disorders. However, several questions remain unresolved. Before their widespread clinical application, further research from well-designed, high-quality studies is required to standardize treatment parameters and determine the optimal protocol for healthcare decision-making. This article provides a comprehensive overview of the impact of musculoskeletal diseases on overall well-being, the limitations of conventional treatments, and the need to explore alternative therapeutic modalities such as electromagnetic field (EMF) therapy. EMF therapy uses low-frequency electromagnetic waves to stimulate tissue repair, reduce inflammation, and modulate pain signals, making it a safe and convenient alternative to conventional treatments. The article also discusses the historical perspective of EMF therapy in medicine. The article highlights the potential of EMF therapy as a personalized and comprehensive care option for musculoskeletal diseases, either alone or in conjunction with other therapies. It emphasizes the imperative for further research in this field and presents a compelling case for the use of EMF therapy in managing musculoskeletal diseases. Overall, the available findings on the underlying cellular and molecular biology support the use of EMF therapy as a viable option for the management of musculoskeletal disorders and stresses the need for continued research in this area.