PurposeTo study geometrical source modeling of 6 MV flattening-filter-free (FFF) beam from TrueBeam linear accelerator and its commissioning validation using Monte Carlo simulation approach. Methods & materialSource modeling of 6MVFFF beam from TrueBeam linear accelerator has been accomplished by using PRIMO as the Monte-Carlo (MC) simulation software based on PENELOPE code. Initially, source modeling of 6MVFFF beam was validated against experimentally measured Percentage-depth-dose (PDD) and profile for 10 × 10cm2 field. Followed by commissioning validation of 6MVFFF beam has been carried out by simulating PDDs, profiles and output factors for range of field sizes. Besides, verification of absolute dose, beam quality index, performance analysis of dose distribution in heterogeneous phantom and simulation of radiation treatment plan for validation of Treatment planning system (TPS) was performed. Simulated results compared against measured; dose distributions were analyzed using gamma analysis with acceptance criteria of 2% Dose-difference (DD) and 2 mm Distance-to-agreement (DTA). ResultsGamma analysis for all the simulated and measured PDDs and profiles shows minimum passing rate of 100% and 98.04% respectively. Simulated values of absolute point dose, beam quality index and output factors shows good agreements with measurements. Gamma analysis of depth dose distribution in heterogeneous phantom obtained using MC simulation and calculated with Analytical anisotropic algorithm (AAA) agreed within 95.89%. However, heterogeneous medium of very high and low-density region shows larger dose discrepancy between MC and AAA due to the poor modeling of AAA compared to MC. The percentage of 99.81% of gamma passing and comparison of predicted Dose-volume-histogram (DVH) shows good resemblance between PRIMO simulated and AAA calculated plan. ConclusionStudy concludes that PRIMO is an independent MC simulation tools for verification and commissioning validation of external beam radiotherapy in treatment of cancer. The MC validation of external beam therapy modules grants higher confidence in accuracy of radiation dose delivery.