Low Density Research Articles

Grafting increases superoxide dismutase and catalase activity to overcome the impact of the two-spotted spider mite on eggplant growth and productivity

Grafting vegetable crops is considered a valuable tool for improving the yield and quality of fruits under various stress conditions. This study aimed to assess the influence of grafting eggplant Solanum melongena (cv. A338) onto Solanum torvum rootstock (cv. STT3) on the incidence of the two-spotted spider mite Tetranychus urticae (TSSM). An experimental study was conducted to investigate the defense response elicited, as assessed by measuring the activities of antioxidant enzymes like superoxide dismutase (SOD) and catalase (CAT), as well as hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>) and chlorophyll contents in grafted and non-grafted eggplants under different TSSM infestation levels (10, 30 and 50 adults per plant). In addition, the effect of grafting on plant growth and yield of eggplant was evaluated. According to the findings of the present study, grafted plants had a lower density of TSSM than non-grafted plants. The number of eggs, nymphs, and adults on grafted plants was 40.11%, 31.71%, and 27.54%, respectively, lower than on non-grafted plants. With increasing TSSM density, the activities of CAT and SOD were increased at varying degrees. In terms of SOD activity, the grafted plants outperformed both the non-grafted scion and rootstock at all TSSM densities. In addition, the results demonstrated that plants with greater CAT activity were able to maintain a lower H<sub>2</sub>O<sub>2</sub> content and vice versa. The lower negative impacts on photosynthetic pigments demonstrated that grafted plants on S. torvum were more resistant to mite-induced damage to chlorophyll and carotenoids as mite density elevated. The grafted plants were superior in vegetative growth, and the total fruit weight was found to be two times higher than non-grafted plants. The features modified by grafting, such as the increased activities of SOD and CAT, can alleviate the impact of TSSM. Therefore, grafting could constitute a valuable tool when combined with other strategies of Integrated Pest Management (IPM) in the two-spotted spider mite control programs.

Inference of neutron-star properties with unified crust-core equations of state for parameter estimation

Context. Relating different global neutron-star (NS) properties, such as tidal deformability and radius, or mass and radius, requires an equation of state (EoS). Determining the NS EoS is therefore not only the science goal of a variety of observational projects, but it also enters in the analysis process; for example, to predict a NS radius from a measured tidal deformability via gravitational waves (GW) during the inspiral of a binary NS merger. To this aim, it is important to estimate the theoretical uncertainties on the EoS, one of which is the possible bias coming from an inconsistent treatment of the low-density region; that is, the use of a so called non-unified NS crust. Aims. We propose a numerical tool allowing the user to consistently match a nuclear-physics informed crust to an arbitrary high-density EoS describing the core of the star. Methods. We introduce an inversion procedure of the EoS close to saturation density that allows users to extract nuclear-matter parameters and extend the EoS to lower densities in a consistent way. For the treatment of inhomogeneous matter in the crust, a standard approach based on the compressible liquid-drop (CLD) model approach was used in our work. A Bayesian analysis using a parametric agnostic EoS representation in the high-density region is also presented in order to quantify the uncertainties induced by an inconsistent treatment of the crust. Results. We show that the use of a fixed, realistic-but-inconsistent model for the crust causes small but avoidable errors in the estimation of global NS properties and leads to an underestimation of the uncertainties in the inference of NS properties. Conclusions. Our results highlight the importance of employing a consistent EoS in inference schemes. The numerical tool that we developed to reconstruct such a thermodynamically consistent EoS, CUTER, has been tested and validated for use by the astrophysical community.

Empirical line ratios for optical emission spectroscopy in low-temperature, low-density, magnetised Ar plasmas

Spectroscopic evaluation of electron temperature and density in low-temperature, low-density, magnetized plasmas can be difficult, but necessary in situations where chemical erosion and physical sputtering prevent the use of other diagnostics, such as Langmuir probes (LP). Further, in such cases, because of the low densities and temperatures, the vessel and environment involved, theoretical line ratios derived from Collisional-Radiative models may not be easily applicable. This is the case, for example, of low-temperature (<15 eV), low-density (<1011 cm−3), magnetised plasma used for plasma-material interaction studies where chemical erosion and physical sputtering can be significant. The aim of the present work is to define an empirical line ratio (ELR) method derived from an extensive calibration campaign with the two diagnostics, using LP measurements as a reference. The ELR method is useful to permit the use of optical emission spectroscopy independent of LP in conditions that are critical for the latter, resulting in an effective instrument for the evaluation of plasma parameters. Further, the use of two different lines of sight and the influence of the magnetic field intensity on the measurements are also discussed. The proposed ELR method is demonstrated here for pure Ar linear plasmas and is in principle applicable also to other similar cases.

Effect of Impact Force on the Impact-Sliding Wear of Titanium Alloy Drill Pipes against Steel Casings

Titanium alloys have been widely used for drill pipes in complex structural wells and ultra-deep wells because they can provide great benefits in cost and operation in drilling systems due to their excellent properties such as high strength, low density, exceptional corrosion resistance and inherent flexibility. However, their wear behaviors during drilling have not been well understood by the communities. In this work, the effect of the impact force on the wear performance of titanium alloy drill pipes against steel casings was investigated through using a modified wet impact-sliding pin-on-disk test system, in which ZSA-3 titanium alloy was used for the pins and J55 steel was for the disks. The tests were conducted under simulated drilling mud conditions. As the impact force increases, the coefficient of friction tends to become stable and fluctuates slightly, and thus the wear rate of the tribo-pairs decreases gradually. The wear mechanism of J55 steel disks presents a transition from plastic deformation to plastic deformation accompanied by adhesive wear, while that of the titanium alloy pins changes from the plowing effect with adhesive wear to plastic deformation and adhesive wear. In addition, complex oxides will be formed on the surfaces of the tribo-pairs due to the oxidation of Ti and Fe during the wear process. The present results could provide as a fundamental guide for the drilling engineers in related industries for reducing casing wear in the drilling environment.

Competing CO and HCOOH Pathways in CO2 Electroreduction

AbstractHuman activities have significantly contributed to the increase in global carbon emissions, leading to adverse environmental effects such as global warming. Electrochemical reduction of carbon dioxide (CO2RR) presents a promising approach to mitigate carbon emissions. This process not only stores the low energy density renewable energies into high energy density chemical bonds, but also produces a variety of valuable products, including one‐carbon products like HCOOH and CO, as well as multi‐carbon products like CH3CH2OH and C2H4. Among them, HCOOH and CO can be produced with over 90 % selectivity on various catalysts, indicating their potential for large‐scale applications. However, the precise reaction pathways toward CO and HCOOH remain unclear, and the competition between these pathways often leads to low product selectivity. This review offers a comprehensive examination of the latest research on the selective reduction of CO2 to CO and/or HCOOH, focusing on the development of the reaction mechanisms based on theoretical simulations and experimental investigations, and the application of catalysts designed to fine‐tune CO/HCOOH selectivity. Additionally, this review highlights the challenges and prospects for the further development and understanding of selective catalysts for CO and HCOOH production, aiming to provide valuable insights for future studies in this intriguing and significant research field.

Stellarators with enhanced tritium confinement and edge radiation control

A stellarator design is described with the purpose of achieving three goals: (1) enhance the confinement time of tritium. (2) Have a sufficient density of high-Z impurities to radiate the thermal power escaping from the core while having an extremely low impurity density in the core. (3) Maintain a large fraction of the plasma in a burning plasma state with an optimal tritium fraction. Some features of this design could be used in tokamaks. Although having three confinement zones is natural for stellarators, it is not for tokamaks.

Low-density cultured cartilage cells expanded in platelet lysate present distinct features to develop an innovative clinical treatment for diffuse cartilage lesions.

Chondrocyte-based cell therapies are effective for the treatment of chondral lesions, but remain poorly indicated for diffuse lesions in the context of early osteoarthritis (OA). The aim of this study was to develop a protocol to obtain chondroprogenitor cells suitable for the treatment of diffuse chondral lesions within early OA. Cartilage cells were expanded at low density in human platelet lysate (hPL). A test was performed to exclude senescence. The expression of surface cluster of differentiation 146, cluster of differentiation 166, major histocompatibility complex (MHC)-Iand MHC-II and of genes of interest were evaluated, as well as the trophic potential of these cells, by the assessment of lubricin and matrix production. The immunomodulatory potential was assessed through their co-culture with macrophages. Cartilage cells expanded at low density in hPL showed higher proliferation rate than standard-density cells, no replicative senescence, low immunogenicityand expression of lubricin. Moreover, they presented an increased expression of chondrogenic and antihypertrophic markers, as well as a superior matrix deposition if compared to cells cultured at standard density. Cartilage cells induced on macrophages an upregulation of CD206, although a higher increase of CD163 expression was observed in the presence of low-density cells. These findings lay the grounds to explore the clinical usefulness of low-density cultured cartilage cells to treat diffuse lesions in early OA joints for both autologous and allogenic use. Not applicable.

Chemical and Electrochemical Characterization of Hot-Pressed Li6PS5Cl Solid State Electrolyte: Operating Pressure-Invariant High Ionic Conductivity.

Sulfide solid state electrolytes (SSE) are among the most promising materials in the effort to replace liquid electrolytes, largely due to their comparable ionic conductivities. Among the sulfide SSEs, Argyrodites (Li6PS5X, X=Cl, Br, I) further stand out due to their high theoretical ionic conductivity (~1×10-2 S cm-1) and interfacial stability against reactive metal anodes such as lithium. Generally, solid state electrolyte pellets are pressed from powder feedstock at room temperature, however, pellets fabricated by cold pressing consistently result in low bulk density and high porosity, facilitating interfacial degradation reactions and allowing dendrites to propagate through the pores and grain boundaries. Here, we demonstrate the mechanical and electrochemical implications of hot-pressing standalone LPSCl SSE pellets with near-theoretical ionic conductivity, superior cycling performance, and enhanced mechanical stability. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and x-ray diffraction spectroscopy (XRD) analysis reveal no chemical changes to the Argyrodite surface after hot pressing up to 250 °C. Moreover, we use electrochemical impedance spectroscopy (EIS) to understand mechanical stability of Argyrodite SSE pellets as a function of externally applied pressure, demonstrating for the first time pressed standalone Argyrodite pellets with near-theoretical conductivities at external pressures below 14 MPa.

Biomaterial Improves the Stability of Perovskite Solar Cells by Passivating Defects and Inhibiting Ion Migration.

With the rapid improvement of power conversion efficiency (PCE), perovskite solar cells (PSCs) have broad application prospects and their industrialization will be the next step. Nevertheless, the performance and long-term stability of the devices are limited by the defect-induced nonradiative recombination centers and ions' migration inside the perovskite films. Here, usnic acid (UA), an easy-to-obtain and efficient natural biomaterial with a hydroxyl functional group (-OH) and four carbonyl groups (-C═O) was added to MAPbI3 perovskite precursor to regulate the crystallization process by slowing the crystallization rate, thereby expanding the crystal size and preparing perovskite films with low defect density. In addition, UA anchors the uncoordinated Pb2+ and suppresses the migration of I-ions, which enhances the stability of the perovskite film. Consequently, an impressive PCE exceeding 20% was achieved for inverted structure MAPbI3-based PSCs. More impressively, the optimized PSCs maintained 78% of the initial PCE under air with high humidity (RH ≈ 65%, 25-30 °C) for 1000 h. UA can be extracted from the plant, usnea, making it inexpensive and easy to obtain. Our work demonstrates the application of the plant material in PSCs and their industrialization, which is significant nowadays.

What does visual snow look like? Quantification by matching a simulation.

The primary symptom of visual snow syndrome (VSS) is the unremitting perception of small, flickering dots covering the visual field. VSS is a serious but poorly understood condition that can interfere with daily tasks. Several studies have provided qualitative data about the appearance of visual snow, but methods to quantify the symptom are lacking. Here, we developed a task in which participants with VSS adjusted parameters of simulated visual snow on a computer monitor until the simulation matched their internal visual snow. On each trial, participants (n = 31 with VSS) modified the size, density, update speed, and contrast of the simulation. Participants' settings were highly reliable across trials (intraclass correlation coefficients > 0.89), and they reported that the task was effective at stimulating their visual snow. On average, visual snow was very small (less than 2 arcmin in diameter), updated quickly (mean temporal frequency = 18.2 Hz), had low density (mean snow elements vs. background = 2.87%), and had low contrast (average root mean square contrast = 2.56%). Our task provided a quantitative assessment of visual snow percepts, which may help individuals with VSS communicate their experience to others, facilitate assessment of treatment efficacy, and further our understanding of the trajectory of symptoms, as well as the neural origins of VSS.

Can we screen opportunistically for low BMD using CT scans of the shoulder and artificial intelligence.

To evaluate whether the computed tomography (CT) attenuation of bones seen on shoulder CT scans could be used to predict low bone mineral density (BMD) (osteopenia/osteoporosis), and to compare the performance of two machine learning models to predict low BMD. 194 patients aged 50 years or greater (69.2 +/- 9.1 years; 170 females) who had unenhanced shoulder CT scans and dual-energy x-ray absorptiometry (DXA) within 1 year of each other between January 1st, 2010 and December 31st, 2021 were evaluated. The CT attenuation of the humerus, glenoid, coracoid, acromion, clavicle, first, second, and third ribs were obtained using 3D-Slicer. Support vector machines (SVM) and k-nearest neighbors (kNN) were used to predict low BMD. DeLong's test was used to compare the area under the curve (AUCs). A CT attenuation of 195.4 Hounsfield Units (HU) of the clavicle had a sensitivity of 0.577, specificity of 0.781 and AUC of 0.701 to predict low BMD. In the test dataset, the SVM had sensitivity of 0.686, specificity of 1.00 and AUC of 0.857; while the kNN model had sensitivity of 0.966, specificity of 0.200, and AUC of 0.583. The SVM was superior to the CT attenuation of the clavicle (P = 0.003), but not better than the kNN model (P = 0.098). The CT attenuation of the clavicle was best for predicting low BMD, however, a multivariable SVM was superior for predicting low BMD. SVM utilizing the CT attenuations at many sites was best for predicting low BMD.

Comparative Study of Plasma-Enhanced-Atomic-Layer-Deposited Al2O3/HfO2/SiO2 and HfO2/Al2O3/SiO2 Trilayers for Ultraviolet Laser Applications.

High-performance thin films combining large optical bandgap Al2O3 and high refractive index HfO2 are excellent components for constructing the next generation of laser systems with enhanced output power. However, the growth of low-defect plasma-enhanced-atomic-layer-deposited (PEALD) Al2O3 for high-power laser applications and its combination with HfO2 and SiO2 materials commonly used in high-power laser thin films still face challenges, such as how to minimize defects, especially interface defects. In this work, substrate-layer interface defects in Al2O3 single-layer thin films, layer-layer interface defects in Al2O3-based bilayer and trilayer thin films, and their effects on the laser-induced damage threshold (LIDT) were investigated via capacitance-voltage (C-V) measurements. The experimental results show that by optimizing the deposition parameters, specifically the deposition temperature, precursor exposure time, and plasma oxygen exposure time, Al2O3 thin films with low defect density and high LIDT can be obtained. Two trilayer anti-reflection (AR) thin film structures, Al2O3/HfO2/SiO2 and HfO2/Al2O3/SiO2, were then prepared and compared. The trilayer AR thin film with Al2O3/HfO2/SiO2 structure exhibits a lower interface defect density, better interface bonding performance, and an increase in LIDT by approximately 2.8 times. We believe these results provide guidance for the control of interface defects and the design of thin film structures and will benefit many thin film optics for laser applications.

Bisphosphonates synergistically enhance the antifungal activity of azoles in dermatophytes and other pathogenic molds.

Fungal infections of the skin, hair, and nails, generally grouped together as "tineas" are the most prevalent infectious diseases globally. These infections, caused by fungal species known as dermatophytes, are generally superficial, but can in some cases become aggressive. They are also notoriously difficult to resolve, with few effective treatments and rising levels of drug resistance. Here, we report a potential new treatment that combines azole antifungals with bisphosphonates. Bisphosphonates are approved for the treatment of low bone density diseases, and in fungi they inhibit the biosynthesis of the cell membrane, which is also the target of azoles. Combinations were synergistic across the dermatophyte species and prevented the development of resistance. We extended the study to molds that cause invasive disease, finding synergy in some problematic species. We suggest bisphosphonates could be repurposed as synergents for tinea treatment, and that this combination could be fast-tracked for use in clinical therapy.

Quantitative cellular pathology of the amygdala in temporal lobe epilepsy and correlation with magnetic resonance imaging volumetry, tissue microstructure, and sudden unexpected death in epilepsy risk factors.

Amygdala enlargement can occur in temporal lobe epilepsy, and increased amygdala volume is also reported in sudden unexpected death in epilepsy (SUDEP). Apnea can be induced by amygdala stimulation, and postconvulsive central apnea (PCCA) and generalized seizures are both known SUDEP risk factors. Neurite orientation dispersion and density imaging (NODDI) has recently provided additional information on altered amygdala microstructure in SUDEP. In a series of 24 surgical temporal lobe epilepsy cases, our aim was to quantify amygdala cellular pathology parameters that could predict enlargement, NODDI changes, and ictal respiratory dysfunction. Using whole slide scanning automated quantitative image analysis methods, parallel evaluation of myelin, axons, dendrites, oligodendroglia, microglia, astroglia, neurons, serotonergic networks, mTOR-pathway activation (pS6) and phosphorylated tau (pTau; AT8, AT100, PHF) in amygdala, periamygdala cortex, and white matter regions of interest were compared with preoperative magnetic resonance imaging data on amygdala size, and in 13 cases with NODDI and evidence of ictal-associated apnea. We observed significantly higher glial labeling (Iba1, glial fibrillary acidic protein, Olig2) in amygdala regions compared to cortex and a strong positive correlation between Olig2 and Iba1 in the amygdala. Larger amygdala volumes correlated with lower microtubule-associated protein (MAP2), whereas higher NODDI orientation dispersion index correlated with lower Olig2 cell densities. In the three cases with recorded PCCA, higher MAP2 and pS6-235 expression was noted than in those without. pTau did not correlate with SUDEP risk factors, including seizure frequency. Histological quantitation of amygdala microstructure can shed light on enlargement and diffusion imaging alterations in epilepsy to explore possible mechanisms of amygdala dysfunction, including mTOR pathway activation, that in turn may increase the risk for SUDEP.

Photocrosslinkable hydrogel of ibuprofen-chitosan methacrylate modulates inflammatory response.

Methacrylated biopolymers are unique and attractive in preparing photocrosslinkable hydrogels in biomedical applications. Here we report a novel chitosan (CS) derivative-based injectable hydrogel with anti-inflammatory capacity via methacrylation modification. First, ibuprofen (IBU) was conjugated to the backbone of CS by carbodiimide chemistry to obtain IBU-CS conjugate, which converts water-insoluble unmodified CS into water-soluble IBU-CS conjugate. The IBU-CS conjugate did not precipitate at the pH of 7, which was beneficial to subsequent chemical modification with methacrylic anhydride to prepare IBU-CS methacrylate (IBU-CS-MA) with significantly higher methacrylation substitution. Photocrosslinkable in situ gel formation of injectable IBU-CS-MA hydrogel was verified using lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) initiator under visible light. The IBU-CS-MA hydrogel showed good cytocompatibility as revealed by encapsulating and in vitro culturing murine fibroblasts within hydrogels. It promoted macrophage polarization toward M2 phenotype, as well as downregulated pro-inflammatory gene expression and upregulated anti-inflammatory gene expression of macrophages. The hydrogel also significantly reduced the reactive oxygen specifies (ROS) and nitrogen oxide (NO) produced by lipopolysaccharides (LPS)-stimulated macrophages. Upon subcutaneous implantation in a rat model, it significantly mitigated inflammatory responses as shown by significantly lower inflammatory cell density, less cell infiltration, and much thinner fibrous capsule compared with CS methacrylate (CS-MA) hydrogel. This study suggests that IBU-CS conjugate represents a feasible strategy for preparing CS-based methacrylate hydrogels for biomedical applications.

TESS Giants Transiting Giants. IV. A Low-density Hot Neptune Orbiting a Red Giant Star

Hot Neptunes, gaseous planets smaller than Saturn (∼3–8 R ⊕) with orbital periods less than 10 days, are rare. Models predict this is due to high-energy stellar irradiation stripping planetary atmospheres over time, often leaving behind only rocky planetary cores. Using our TESS full-frame-image pipeline giants in conjunction with Keck/HIRES radial velocity measurements, we present the discovery of TIC365102760 b, a 6.2 R ⊕(0.55 R J), 19.2 M ⊕(0.060 M J) planet transiting a red giant star every 4.21285 days. The old age and high equilibrium temperature yet remarkably low density of this planet ( ρp=0.58−0.20+0.30ρJ ) suggest that its gaseous envelope should have been stripped by high-energy stellar irradiation billions of years ago. The present-day planet mass and radius suggest the atmospheric stripping was slower than predicted. Unexpectedly low stellar activity and/or late-stage planet inflation could be responsible for the observed properties of this system. Further studies of this system with more precise photometry in multiple passbands will be capable of revealing more details of this planet’s atmosphere.

High-energy B-O bonds enable the phenolic aerogel with enhanced thermal stability and low thermal conductivity

Phenolic aerogels have addressed considerate application in fabricating lightweight ablative materials owing to their excellent characteristics of large surface area, low bulk density, and low thermal conductivity. However, unsatisfactory thermal stability still limits their extensive applications. To enhance the thermal stability, we reported a facile co-precursor strategy to prepare boron-modified phenolic aerogels, through sol–gel polymerization of phenylboronic acid and phenolic resin. The thermal stability of hybrid aerogels is remarkably enhanced, achieving a char yield of up to 64.16 % at 850 ℃ due to the much higher bonding energy of B-O bonds. The phenyl-borates structure gradually transferred into B2O3, effectively fixing the oxygen content and reducing the carbon loss during the carbonization process. Moreover, the in-situ formed phenyl-borates structure contributes to forming a denser network, which affords the hybrid aerogels with diverse properties: low density (0.31–0.34 g/cm3), a hierarchical micro-meso-macro porous structure with small particle size (28.42–48.58 nm), promoted compressive strength (20.65–28.46 MPa), and excellent insulation performance (0.0406–0.0564 W/(m•k)). These integrated superiorities enable the boron-modified phenolic aerogels to perform effectively in thermal insulation fields, especially for aerospace related industry.

Distinguishing risk of curve progression in adolescent idiopathic scoliosis with bone microarchitecture phenotyping - a 6-year longitudinal study.

Low bone mineral density and impaired bone qualities have been shown to be important prognostic factors for curve progression in Adolescent Idiopathic Scoliosis (AIS). There is no evidence-based integrative interpretation method to analyse high-resolution peripheral quantitative computed tomography (HR-pQCT) data in AIS. This study aimed to (a) utilize unsupervised machine learning to cluster bone microarchitecture phenotypes on HR-pQCT parameters in AIS girls, (b) assess the phenotypes' risk of curve progression and progression to surgical threshold at skeletal maturity (primary cohort), and (c) investigate risk of curve progression in a separate cohort of mild AIS girls whose curve severity did not reach bracing threshold at recruitment (secondary cohort). Patients were followed up prospectively for 6.22 ± 0.33years in the primary cohort (N = 101). Three bone microarchitecture phenotypes were clustered by Fuzzy C-Means at time of peripubertal peak height velocity (PHV). Phenotype-1 had normal bone characteristics. Phenotype-2 was characterized by low bone volume and high cortical bone density, and Phenotype-3 had low cortical and trabecular bone density and impaired trabecular microarchitecture. The difference in bone qualities amongst the phenotypes was significant at peripubertal PHV and continued to skeletal maturity. Phenotype-3 had significantly increased risk of curve progression to surgical threshold at skeletal maturity (Odd Ratios (OR) = 4.88; 95% Confidence Interval (CI): 1.03-28.63). In the secondary cohort (N = 106), both Phenotype-2 (adjusted OR = 5.39; 95%CI: 1.47-22.76) and Phenotype-3 (adjusted OR = 3.67; 95%CI: 1.05-14.29) had increased risk of curve progression ≥6° with mean follow-up of 3.03 ± 0.16years. In conclusion, three distinct bone microarchitecture phenotypes could be clustered by unsupervised machine learning on HR-pQCT generated bone parameters at peripubertal PHV in AIS. The bone qualities reflected by these phenotypes were found to have significant differentiating risk of curve progression and progression to surgical threshold at skeletal maturity in AIS.

What Phenomena Happen During Pyrolysis of Plastic? FTIR AND GC-MS Analysis of Pyrolyzed Low Linear Density Polyethylene (LLDPE) Polymer Particles Completed with Bibliometric Research Trend and Pyrolysis Chemical Reaction Mechanism

This research aims to determine the compounds produced from the pyrolyzed Low Linear Density Polyethylene (LLDPE) using Fourier Transform Infrared (FTIR) and Gas Chromatography-Mass Spectroscopy (GC MS). We used pyrolysis of 985 g of 2-mm diameter LLDPE plastic ore at a temperature between 192-194°C for 135 min using a batch reactor (length x width x height = 35 cm x 24 cm x 44 cm) equipped with an outlet connected to two condensers (24°C). To ensure the chemical results, the reactor was connected in series to condensers 1 and 2. The results obtained in condenser 1 were 3 mL of 2-phase liquid with a strong odor. The upper fluid is yellow, and the lower fluid is brown. In condenser 2 (connected directly to condenser 1), 4 mL of yellow single-phase liquid was produced with a strong odor. The liquid obtained from the pyrolysis process was then analyzed by FTIR and GC-MS. FTIR results on both samples showed that the samples contained the functional groups O-H, CH₂, and C=O. The GC-MS results on condenser sample 2 showed that the pyrolysis product contained acetone compounds. This confirmed that pyrolysis caused chemical structural changes in LLDPE due to LLDPE chain bond-breaking reactions, producing many smaller chemical compounds. Additionally, some oxidation happens, which is due to the oxygen content in the reactor. This study provides new insights into the LLDPE pyrolysis mechanism and the physical and chemical properties of the liquid resulting from the pyrolysis process.

Development and Characterization of Hybrid Particulate-fiber Reinforced Epoxy Composites

Although considered wastes, animal fibers and gastropod shell particles are biodegradable, have low density, high stiffness, considerably high impact absorption capacity and relatively low cost. Therefore, they are finding increasing use as reinforcement materials in polymer composites. This research work studied the tensile, hardness, and wear resistance properties of hybrid snail shell (SSP) and chicken feather barb fibers (CFB) reinforced epoxy composites. The stir cast molding technique was utilized to synthesize the composite samples with 3, 6, 9, 12, 15, and 18 wt.% of the hybrid SSPs/CFB. Compared with the control samples, SSP/CFB hybrid reinforcements enhanced the mechanical properties of the composites. Composites with intermediate weight fraction of 9 wt.% SSP/CFB exhibited overall optimum properties when benchmarked against the control sample with approximately 37, 37, 133, 19, and 59% improvement in wear, hardness, impact, and ultimate tensile strength properties respectively. These enhancements suggested a synergistic effect of the two reinforcement phases. The results presented in this study demonstrated the potential of utilizing bio-derived waste materials for synthesizing eco-friendly composites.