Low Carbon Wastewater Research Articles

Unraveling chained optimization strategies for carbon emission control in WWTPs and effective water utilization within complicated water systems.

China faces severe water scarcity and significant greenhouse gas (GHG) emission pressures. As significant sources of GHG emission within urban system, wastewater treatment plants (WWTPs) exhibit a clear coupling relationship between wastewater treatment and urban water usage. However, the lack of trace of the water‑carbon nexus has created an obstacle to coordinating water utilization strategies and low-carbon wastewater treatment. In this context, the carbon emission intensity of the WWTPs and water use efficiency within the region were appropriately assessed focusing on the Yellow River Basin. A novel approach was introduced to analyze the chain of synergies between carbon neutrality and water conservation goals in urban water system. Specific chained optimization strategies tailored to each region were provided with dimensions linking different aspects of urban water system development, providing fresh perspectives and guidance for GHG mitigation, water resource utilization, and sustainable human development.

Optimized Mn cycle enhanced synchronous removal of nitrate and antibiotics driven by manganese oxides/solid carbon composites: Microbiota assembly patterns and electron transport.

The reactive substance consisting manganese oxides (MnOx) and solid carbon have been reported to be effective in polishing secondary wastewater; however, the treatment characteristics and mechanism remains limited. In this study, MnOx/carbon (Mn-C) composites were applied in biofilters to evaluate simultaneous removal of nitrate and sulfamethoxazole (SMX), with the single carbon composites as control. Results showed that the effluent concentrations of NO3--N and SMX were below 2.87 mg L-1 and 7.97 μg L-1 under hydraulic retention time (HRT) of 6 h. The intermittent aeration optimized Mn cycle with treatment performance improved under lower HRT and Mn(II) accumulation decreased. Mn-C composites could reduce the emission of N2O, CO2 and CH4. The dominant genera gradually evolved from fermentation to glycogen aggregation, and from heterotrophic/sulfur autotrophic to heterotrophic denitrifiers by intracellular substance and manganese autotrophic/heterotrophic bacteria. Microbial network analysis indicated higher antagonism, lower modularity and shorter average path among microbes in Mn-C biofilters, which highlighted microbial differentiation and faster electron transfer. Improved functions of denitrification and Mn respiration, and the increasing genes encoding electron transfer chain, including NADH dehydrogenase, Cytc and ubiquinone, further elucidated the superiority of Mn-C composites. These results improved our understanding of Mn-C composites application in low-carbon wastewater treatment.

Novel sulfide-driven denitrification methane oxidation (SDMO) system based on SBR-MBfR and EGSB-MBfR

Traditional denitrification process consumes external organic carbon leading to an increase in treatment costs and carbon emission. A novel sulfide-driven denitrification methane oxidation (SDMO) system, which could simultaneously utilize CH4 and H2S in biogas as electron donors for denitrification to reduce the cost and carbon emission, has been successfully operated in two kinds of reactors SBR-MBfR and EGSB-MBfR for ∼ 200 days in this study. The performance and microbial community were explored meanwhile machine learning approach have been used for predicting the complex effects on SDMO’s denitrification efficiency. Result shows SBR-MBfR’s superior performance with the maximum nitrate removal efficiency > 90 % while the denitrification rates and biological activity were also better than EGSB-MBfR. The autotrophic denitrification (Auto-D) contributed 5 % much more for nitrate removal in SBR-MBfR than EGSB-MBfR while denitrification anaerobic methane oxidation (DAMO) was more prominent in EGSB-MBfR. Nineteen machine learning models were used for operation data training and random forest regressor was demonstrated to be the optimal model for predicting nitrate removal efficiency in SDMO. According to random forest regressor’s analysis, HRT presented the highest importance in affecting SDMO nitrate removal efficiency. After the introduction of biogas for domestication, Auto-D bacteria Thiobacillus was the dominant bacteria in both systems occupying > 20 % and the abundance would increase gradually from ∼ 20 % to ∼ 60 % as H2S content rising. A hidden positive correlation between DAMO bacteria Candidatus Methylomirabilis and Thiobacillus was uncovered by mantel test analysis here, implying the integrating of Auto-D and DAMO process for nitrate removal. This study not only provides insights into the novel SDMO technology but also offers a potential advancement in simultaneously low-carbon wastewater treatment and biogas utilization.

Functional and Microbiological Responses of Iron–Carbon Galvanic Cell-Supported Autotrophic Denitrification to Organic Carbon Variation and Dissolved Oxygen Shaking

Iron–carbon galvanic-cell-supported autotrophic denitrification (IC-ADN) is a burgeoning efficient and cost-effective process for low-carbon wastewater treatment. This study revealed the influence of organic carbon (OC) and dissolved oxygen (DO) on IC-ADN in terms of functional and microbiological characteristics. The nitrogen removal efficiency increased to 91.6% and 94.7% with partial organic carbon source addition to COD/TN of 1 and 3, respectively. The results of 16S rRNA high-throughput sequencing with nirS and cbbL clone libraries showed that Thiobacillus was the predominant autotrophic denitrifying bacteria (ADB) in the micro-electrolysis-based autotrophic denitrification, which obtained nitrogen removal efficiency of 80.9% after 96 h. The ADBs shifted gradually to heterotrophic denitrifying bacteria Thauera with increasing COD/TN ratio. DO concentration of 0.8 rarely affected the denitrification efficiency and the denitrifying communities. When the DO concentration increased to 2.8 mg/L, the nitrogen removal efficiency decreased to 69.1%. These results demonstrated that autotrophic denitrification was notably affected by COD/TN and high DO concentration, which could be used to acquire optimum conditions for nitrogen removal. These results provided an in-depth understanding of the influential factors for galvanic-cell-based denitrification and helped us construct a stable and highly efficient treatment process for insufficient carbon source wastewater.

Low-carbon wastewater treatment and resource recovery of recirculating aquaculture system by immobilized chlorella vulgaris based on machine learning optimization

Immobilized microalgae biotechnologies can conserve water and space by low-carbon wastewater treatment and resource recovery in a recirculating aquaculture system (RAS). However, technical process parameters have been unoptimized considering the mutual interaction between factors. In this study, machine learning optimized the parameters of alginate-immobilized Chlorella vulgaris (C. vulgaris), that is, 474 μmol/(m2·s) of light intensity, 23 × 106 cells/mL for initial cell number, and 2.07 mm particle size. Importantly, under continuous illumination, the immobilized C. vulgaris and microalgal-bacterial consortium improved water purification and biomass reutilization. Transcriptomics of C. vulgaris showed enhanced nitrogen removal by increasing pyridine nucleotide and lipid accumulation via enhanced triacylglycerol synthesis. Symbiotic bacteria upregulated genes for nitrate reduction and organic matter degradation, which stimulated biomass accumulation through CO2 fixation and starch synthesis. The recoverable microalgae (1.94 g/L biomass, 47 % protein, 26.23 % lipids), struvite (64.79 % phosphorus), and alginate (79.52 %) every two weeks demonstrates a low-carbon resource recovery in RAS.

Neglected role of iron redox cycle in direct interspecies electron transfer in anaerobic methanogenesis: Inspired from biogeochemical processes

Anaerobic digestion is an indispensable technical option towards green and low-carbon wastewater treatment, with interspecies electron transfer (IET) playing a key role in its efficiency and operational stability. The exogenous semiconductive iron oxides have been proven to effectively enhance IET, while the cognition of the physicochemical-biochemical coupling stimulatory mechanism was circumscribed and remains to be elucidated. In this study, semiconductive iron oxides, α-Fe2O3, γ-Fe2O3, α-FeOOH, and γ-FeOOH were found to significantly enhance syntrophic methanogenesis by 76.39, 72.40, 37.33, and 32.64% through redirecting the dominant IET pathway from classical interspecies hydrogen transfer to robust direct interspecies electron transfer (DIET). Their alternative roles as electron shuttles potentially substituting for c-type cytochromes were conjectured to establish an electron transport matrix associated with conductive pili. Distinguished from the conventional electron conductor mechanism of conductive Fe3O4, semiconductive iron oxides facilitated DIET intrinsically through the capacitive Fe(III/II) redox cycles coupled with secondary mineralization. The growth of Aminobacterium, Sedimentibacter, and Methanothrix was enriched and the gene copy numbers of Geobacteraceae 16S ribosomal ribonucleic acid were selectively flourished by 2.0-∼4.5- fold to establish a favorable microflora for DIET pathway. Metabolic pathways of syntrophic acetogenesis from propionate/butyrate and CO2 reduction methanogenesis were correspondingly promoted. The above findings provide new insights into the underlying mechanism of iron minerals enhancing the DIET-oriented pathway and offer paradigms for redox-mediated energy harvesting biological wastewater treatment.

Roles of oxygen in methane oxidation coupled denitrification in membrane biofilm reactors

With a focus on efficient and low-carbon wastewater treatment, methane driven denitrification has garnered significant attention. Membrane biofilm reactors (MBfRs) are commonly employed to enhance methane utilization. However, previous studies have identified the impact of unavoidable oxygen infiltration on reactor performances without specifying the critical oxygen threshold. In this study, two parallel CH4-MBfRs with different oxygen intakes were established for mutual control. Three different oxygen concentrations, namely 4.5 ± 0.4 mg/L, 1.7 ± 0.2 mg/L, and 0.1 ± 0.1 mg/L, were defined as Rich, Limited, and Poor-oxygen condition, respectively. Results revealed that the maximum denitrification rate in CH4-MBfRs occurred under Limited-oxygen condition (220 mg N/L/d), followed by Poor-oxygen (108.1 mg N/L/d) and Rich-oxygen (60.0 mg N/L/d) conditions. Notably, methane driven denitrification consistently resulted in short chain fatty acids (SCFAs) production. The maximum SCFAs accumulation of 664.5 mg/L was also observed under Limited-oxygen condition. Microbial community characterization showed that the biofilm was predominated by Pseudomonas, Paracoccus, Lentimicrobium, Arcanobacterium, and Proteiniphilum. Based on the known metabolism characteristics of these microorganisms, it was assumed that these denitrifiers and SCFAs producers contributed jointly to methane driven denitrification, potentially triggered by oxygen. The findings contribute to understanding the role of oxygen in methane oxidation-coupled denitrification.

Rapid conversion of heterotrophic denitrification to autotrophic denitrification in mariculture wastewater treatment: Denitrification performance and microbial communities under antibiotic stress

Mariculture wastewater, characterized by a low COD/Nitrogen (C/N) ratio and the occurrence of antibiotics, is commonly treated by a heterotrophic denitrification (HD) process with supplying substantial carbon sources. Compared to HD, sulfur-based autotrophic denitrification (AD) requires less external carbon sources and is more favorable for low-carbon wastewater treatment. However, the AD process often consumes more startup time. Thus, the present study was designed to explore a rapid startup strategy for the AD process by switching from HD to AD, treating mariculture wastewater. A rapid transformation from HD to AD was achieved by inoculating mixotrophic denitrifying sludge, reducing carbon sources and adding sulfur sources under the antibiotic sulfamethoxazole (SMX). From the functional microbial community point of view, our results showed that autotrophic bacteria exhibited greater adaptability to sulfamethoxazole than heterotrophic bacteria. During the transition from HD to AD, nitrate removal improved from 53.13 % to 68.57 %, and the secretion of tightly bound extracellular polymeric substances (TB-EPS) increased by 29.94 mg/g VSS. Meanwhile, in the heterotrophic phase, the presence of sulfate in mariculture wastewater maintained a high abundance of sulfate-reducing bacteria such as Desulfuromusa (0.8 %) and sulfur-based autotrophic denitrifying bacteria such as Sedimenticola (36.7 %) and Thiogranum (15.2 %). This increases the activity of sulfur metabolism during the heterotrophic phase and ensures a rapid transition from HD to AD. The rapid shift from HD to AD in seawater under antibiotic stress provides theoretical support for the improvement of mariculture wastewater treatment processes.

Inhibitory mechanism of Cr(VI) on sulfur-based denitrification: Bio-toxicity, bio-electron characteristics, and microbial evolution

Sulfur-based denitrification is a promising technology for efficient nitrogen removal in low-carbon wastewater, while it is easily affected by toxic substances. This study revealed the inhibitory mechanism of Cr(VI) on thiosulfate-based denitrification, including bio-toxicity and bio-electron characteristics response. The activity of nitrite reductase (NIR) was more sensitive to Cr(VI) than that of nitrate reductase (NAR), and NIR was inhibited by 21.32 % and 19.86 % under 5 and 10 mg/L Cr(VI), resulting in 10.12 and 15.62 mg/L of NO2--N accumulation. The biofilm intercepted 36.57 % of chromium extracellularly by increasing 25.78 % of extracellular polymeric substances, thereby protecting microbes from bio-toxicity under 5 mg/L Cr(VI). However, it was unable to resist 20–30 mg/L of Cr(VI) bio-toxicity as 19.95 and 14.29 mg Cr/(g volatile suspended solids) invaded intracellularly, inducing the accumulation of reactive oxygen species by 165.98 % and 169.12 %, which triggered microbial oxidative-stress and damaged the cells. In terms of electron transfer, S2O32- oxidation was inhibited, and parts of electrons were redirected intracellularly to maintain microbial activity, resulting in insufficient electron donors. Meanwhile, the contents of flavin adenine dinucleotide and cytochrome c decreased under 5–30 mg/L Cr(VI), reducing the electron acquisition rate of denitrification. Thermomonas (the dominant genus) possessed denitrification and Cr(VI) resistance abilities, playing an important role in antioxidant stress and biofilm formation. Environmental ImplicationSulfur-based denitrification (SBD) is a promising method for nitrate removal in low-carbon wastewater, while toxic heavy metals such as Cr(VI) negatively impair denitrification. This study elucidated Cr(VI) inhibitory mechanisms on SBD, including bio-toxicity response, bio-electron characteristics, and microbial community structure. Higher concentrations Cr(VI) led to intracellular invasion and oxidative stress, evidenced by ROS accumulation. Moreover, Cr(VI) disrupted electron flow by inhibiting thiosulfate oxidation and affecting electron acquisition by denitrifying enzymes. This study provided valuable insights into Cr(VI) toxicity, which is of great significance for improving wastewater treatment technologies and maintaining efficient and stable operation of SBD in the face of complex environmental challenges.

Constructed wetland – Microbial fuel cell (CW-MFC) packed with suspended fillers to enhance denitrification with Acorus calamus biomass addition

There is an urgent need to meet strict nitrogen discharge limitation for secondary effluent from wastewater treatment plants, but the nitrogen removal is restricted due to the lack of carbon sources. To address the issues, high-density polyethylene (HDPE) was utilized in the constructed wetland-microbial fuel cell (CW-MFC) for the treatment of low carbon wastewater. Meanwhile, wetland plant biomass was efficiently reclaimed, leading to higher nitrogen removal and bioelectricity generation. CW-MFC with biomass added in the anode attained the maximum total nitrogen (TN) removal of 97.55 % and power density of 2.22 mW/m2 with hydraulic retention time (HRT) of 2d, which were much better than those in CW, CW-MFC with no biomass and CW-MFC with biomass added in the cathode. Owing to the HDPE fillers and Acorus calamus biomass addition in CW-MFC, more than 88 % chemical oxygen demand (COD) and 70 % TN were removed with HRT of 1.5d. In addition, metabolisms related to glycolysis, cellulose degradation and nitrogen were increased in CW-MFC, contributing to the enrichment of denitrifying, electroactive and heterotrophic nitrification-aerobic denitrification (HN-AD) bacteria. This study verifies the feasibility of application of HDPE as the biocarriers in CW-MFC and provides mechanistic insights for the enhancement of nitrogen removal in low carbon wastewater treatment with plant biomass addition.

Synergism of Life Cycle Assessment and Sustainable Development Goals Techniques to Evaluate Downflow Hanging Sponge System Treating Low-Carbon Wastewater

While recent researchers have focused on optimizing the operational conditions of low-carbon wastewater treatment processes, they have not sufficiently evaluated the sustainability of such systems. This study is the first to assess the performance of a low-carbon wastewater treatment facility using an integration of techno-economic and life cycle assessment (LCA) criteria accompanied by several sustainability indicators. A downflow hanging sponge (DHS) reactor was operated at a hydraulic retention time of 3.4 h, an organic loading rate of 3.8 kg COD/m3 sponge/d, and 24–35 °C (scenario_1). Another two DHSs were operated in parallel, i.e., a 50% influent bypass (scenario_2) and 260 mg/L charcoal addition (scenario_3), providing carbonaceous matter to maintain the nitrification/denitrification pathway. Employing the DHS’s scenario_3 could fulfill most of the SDGs regarding the environmental (e.g., COD and nitrogen removals) and socio-economic (e.g., reliability, labor, and health and safety) targets. The LCA tool also confirmed the superior environmental benefits of scenario_3, concerning effluent quality, GHG emissions, and sludge generation. The synergistic interaction of LCA and SDGs approaches ranked the proposed DHS modifications as scenario_3 > scenario_1 > scenario_2. Hence, the current study provided an innovative strategy that could be employed to assess the sustainability of wastewater treatment systems worldwide.

Anammox-based technologies: A review of recent advances, mechanism, and bottlenecks

The removal of nitrogen via the ANAMMOX process is a promising green wastewater treatment technology, with numerous benefits. The incessant studies on the ANAMMOX process over the years due to its long start-up and high operational cost has positively influenced its technological advancement, even though at a rather slow pace. At the moment, relatively new ANAMMOX technologies are being developed with the goal of treating low carbon wastewater at low temperatures, tackling nitrite and nitrate accumulation and methane utilization from digestates while also recovering resources (phosphorus) in a sustainable manner. This review compares and contrasts the handful of ANAMMOX -based processes developed thus far with plausible solutions for addressing their respective bottlenecks hindering full-scale implementation. Ultimately, future prospects for advancing understanding of mechanisms and engineering application of ANAMMOX process are posited. As a whole, technological advances in process design and patents have greatly contributed to better understanding of the ANAMMOX process, which has greatly aided in the optimization and industrialization of the ANAMMOX process. This review is intended to provide researchers with an overview of the present state of research and technological development of the ANAMMOX process, thus serving as a guide for realizing energy autarkic future practical applications.

A novel pure biofilm system based on aerobic denitrification for nitrate wastewater treatment: Exploring the feasibility of high total nitrogen removal under low-carbon condition

To improve the poor denitrification efficiency of traditional biological treatment for low-carbon wastewater, a novel pure biofilm moving bed biofilm reactor (PH-MBBR) based on heterotrophic nitrification-aerobic denitrification (HN-AD) bacteria was proposed. The start-up of PH-MBBR inoculated with HN-AD bacteria and the operating performances and microbial community composition under various C/N ratios were studied. The results showed that at C/N ratio of only 4, the total nitrogen (TN) removal rate of 10.02 mg/(L·h) was achieved under aerobic conditions. Microbial analysis indicates that the synergistic effect of oligotrophic bacteria Thauera and Azoarcus was the main reason for the high pollutant removal at C/N ratio of 4. Furthermore, the analysis of functional genes and enzymes reveals that NorB and NosZ played important roles in nitrate metabolism in PH-MBBR, and aerobic denitrification pathway was NO3–-N → NO → N2O → N2. This study provides a practical and theoretical basis for low-carbon nitrate wastewater treatment.

Rapid start-up of an innovative pilot-scale staged PN/A continuous process for enhanced nitrogen removal from mature landfill leachate via robust NOB elimination and efficient biomass retention

The start-up and stable operation of partial nitritation-anammox (PN/A) treatment of mature landfill leachate (MLL) still face challenges. This study developed an innovative staged pilot-scale PN/A system to enhance nitrogen removal from MLL. The staged process included a PN unit, an anammox upflow enhanced internal circulation biofilm (UEICB) reactor, and a post-biofilm unit. Rapid start-up of the continuous flow PN process (full-concentration MLL) was achieved within 35 days by controlling dissolved oxygen and leveraging free ammonia and free nitrous acid to selectively suppress nitrite-oxidizing bacteria (NOB). The UEICB was equipped with an annular flow agitator combined with the enhanced internal circulation device of the guide tube, which achieved an efficient enrichment of Candidatus Kuenenia in the biofilm (relative abundance of 33.4 %). The nitrogen removal alliance formed by the salt-tolerant anammox bacterium (Candidatus Kuenenia) and denitrifying bacteria (unclassified SBR1031 and Denitratisoma) achieved efficient nitrogen removal of UEICB (total nitrogen removal percentage: 90.8 %) and at the same time effective treatment of the refractory organic matter (ROM). The dual membrane process of UEICB fixed biofilm combined with post-biofilm is effective in sludge retention, and can stably control the effluent suspended solids (SS) at a level of less than 5 mg/L. The post-biofilm unit ensured that effluent total nitrogen (TN) remained below the 40 mg/L discharge standard (98.5 % removal efficiency). Compared with conventional nitrification-denitrification systems, the staged PN/A process substantially reduced oxygen consumption, sludge production, CO2 emissions and carbon consumption by 22.8 %, 67.1 %, 87.1 % and 87.1 %, respectively. The 195-day stable operation marks the effective implementation of the innovative pilot-scale PN/A process in treating actual MLL. This study provides insights into strategies for rapid start-up, robust NOB suppression, and anammox biomass retention to advance the application of PN/A in high-ammonia low-carbon wastewater.

Highly selective formation of CO from domestic wastewater with Zero CO2 emissions through solar energy catalysis

Utilizing two of the Earth's most abundant and inexhaustible resources, sunlight and domestic wastewater, to produce value-added CO presents an immense opportunity. Here, we present a novel strategy to selectively generate CO from domestic wastewater with the aid of concentrated solar power and high-entropy sulfide photocatalysts. Our designed system achieves an impressive CO yield of 35 μmol g−1 h−1 with 100% selectivity, showcasing the feasibility of utilizing solar energy alone to drive the heat-promoted photoreaction. Mechanistic investigations divulged the generation of a non-radical 1O2 species with a moderate redox potential. This process enables mild oxidation of carbonaceous organic matter in domestic wastewater, rather than complete mineralization of carbonaceous organic matter and reducing greenhouse gas emissions such as CO2 and CH4 during organic matter degradation. The findings present an effective and promising approach for low-carbon wastewater treatment, highlighting the potential of CO production from wastewater through solar energy catalysis. SynopsisThrough the rational design of the outdoor photocatalytic equipment, close to 100% selectivity from real domestic wastewater to CO gas was successfully achieved.

Effect of HRT on nitrogen removal from low carbon source wastewater enhanced by slurry and its mechanism

Insufficient carbon sources in low-carbon wastewater have consistently hindered nitrogen removal performance. This work utilized slurry after anaerobic digestion as an additional carbon source, and the optimal hydraulic retention time (HRT) parameters were obtained through adjustment. The findings revealed that, under HRT conditions of 24–12 h, the discharge standards of wastewater treatment plants (WWTPs) could be met. It had been proven that HRT 12 h was the more cost-effective parameter for application in WWTPs, and the removal efficiencies for COD, NH4+-N, NO3–-N, and TN reached impressive levels of 82.43%, 95.24%, 77.49%, and 86.70%, respectively. However, the HRT 6 h struggled to achieve efficient wastewater treatment. Mechanistic analysis demonstrated that shortening the HRT resulted in considerably higher microbial richness, diversity, and evenness, causing notable shifts in microbial community structure. Additionally, a shortened HRT reduced the enrichment abundance of key bacterial phyla (Proteobacteria, Bacteroidetes) and genera (Hydrogenophaga, Filimonas, Meganema) that played an important role in nitrogen and organic matter removal. Furthermore, a shortened HRT increased hydraulic shear forces, impeding the enrichment of carbon and nitrogen metabolism pathways, and reducing the abundance of essential genes associated with glycolysis (HK, pfkA, FBA, GAPDH) and nitrogen metabolism processes (narG, narH, narI, norB, nirS, nosZ). It was noteworthy that the microbial community under the HRT 6 h condition carried the highest risk of microbial pathogenicity. This work revealed the optimal parameters, and carbon and nitrogen metabolism mechanism of wastewater treatment systems with slurry as a carbon source for the first time, and provided novel ideas and insights for low-carbon wastewater treatment.

Elemental sulfur autotrophic partial denitrification (S0-PDN) with high pH and free ammonia control strategy for low-carbon wastewater: From performance to microbial mechanism

Elemental sulfur autotrophic partial denitrification (S0-PDN) with high pH and free ammonia control strategy for low-carbon wastewater: From performance to microbial mechanism

Regulating mechanism of denitrifier Comamonas sp. YSF15 in response to carbon deficiency: Based on carbon/nitrogen functions and bioaggregation

There is an urgent demand to investigate mechanisms for the improvement of denitrification in carbon-deficient environment, which will effectively reduce the eutrophication in water bodies polluted by nitrate. In this study, denitrifying bacterium Comamonas sp. YSF15 was used to explore the differences in different carbon source concentrations, with the complete genome, metabolomics, and other detecting methods. Results showed that strain YSF15 was able to achieve efficient denitrification, with complete pathways for denitrification and central carbon metabolism. The carbon deficiency prompted the bacteria to use extracellular amino acid-like metabolites initially, to alleviate inhibition and maintain bioactivity, which also facilitated glycogen storage. The biogenic inhibitors (tautomycin, navitoclax, and glufosinate) at extremely low level potentially favored the competitiveness and intraspecific utilization of extracellular polysaccharides (PS). Optimal solutions for bioaggregation in carbon-deficient condition are achieved by regulating the hydrophobicity, and hydrogen bond in extracellular metabolites. The strategy contributes to the maintenance of bioactivity and adaptation to carbon deficiency. Overall, this study provides a new perspective on understanding the denitrification strategies in carbon-deficient environment, and helps to improve the nitrate removal in low-carbon wastewater treatment.

Acorus calamus recycled as an additional carbon source in a microbial fuel cell-constructed wetland for enhanced nitrogen removal

Acorus calamus was recycled as an additional carbon source in microbial fuel cell-constructed wetlands (MFC-CWs), for efficient nitrogen removal of low carbon wastewater. The pretreatment methods, adding positions, and nitrogen transformations were investigated. Results indicated that alkali-pretreatment cleaved the benzene rings in dominant released organics, producing chemical oxygen demand of 164.5 mg from per gram of A. calamus. Pretreated biomass addition in the anode of MFC-CW attained the maximum total nitrogen removal of 97.6% and power generation of 12.5 mW/m2, which were higher than those with biomass in the cathode (97.6% and 1.6 mW/m2, respectively). However, the duration of a cycle with biomass in the cathode (20–25 days) was longer than that in the anode (10–15 days). Microbial metabolisms related to organics degradation, nitrification, denitrification, and anammox were intensified after biomass recycling. This study provides a promising method to improve nitrogen removal and energy recovery in MFC-CWs.

Achieving advanced nitrogen removal from low-carbon municipal wastewater using partial-nitrification/anammox and endogenous partial-denitrification/anammox

To achieve advanced nitrogen removal from low-carbon wastewater, a partial-nitrification/anammox and endogenous partial-denitrification/ anammox (PN/A-EPD/A) process was developed in a sequential batch biofilm reactor (SBBR). Advanced nitrogen was achieved with the effluent total nitrogen (TN) of 3.29 mg/L when the influent COD/TN and the TN were 2.86 and 59.59 mg/L, respectively. This was attributed to a stable PN/A-EPD/A, which was achieved through the integration of four strategies, including treating the inoculated sludge with free nitrous acid, inoculating anammox biofilm, discharging excess activated sludge and residual ammonium at the end of oxic stage. The 16S rRNA high-throughput sequencing results demonstrated that anammox bacteria coexisted with ammonia oxidizing bacteria, nitrite oxidizing bacteria, denitrifying glycogen accumulating organisms (DGAOs) and denitrifying phosphorus accumulating organisms (DPAOs) in biofilms. The abundance of anammox bacteria in the inner layer of the biofilm is higher, while that of DGAOs and DPAOs is higher in the outer layer.