SiGe has been utilized for aggressive CMOS technologies development recently and there are many references [M. Shima, T. Ueno, T. Kumise, H. Shido, Y. Sakuma, S. Nakamura, Symposium on VLSI Technology Technical Digest, 2002, pp. 94–95; T. Ghani, M. Armstrong, C. Auth, M. Bost, P. Charvat, G. Glass, T. Hoffmann, K. Johnson, C. Kenyon, J. Klaus, B. McIntyre, K. Mistry, A. Murthy, J. Sandford, M. Silberstein, S. Sivakumar, P. Smith, K. Zawadzki, S. Thompson, M. Bohr, International Electron Devices Meeting Technical Digest, December 2003, pp. 978–980; P. Bai, C. Auth, S. Balakrishnan, M. Bost, R. Brain, V. Chikarmane, R. Heussner, M. Hussein, J. Hwang, D. Ingerly, R. James, J. Jeong, C. Kenyon, E. Lee, S. Lee, N. Lindert, M. Liu, Z. Ma, T. Marieb, A. Murthy, R. Nagisetty, S. Natarajan, J. Neirynck, A. Ott, C. Parker, J. Sebastian, R. Shaheed, S. Sivakumar, J. Steigerwald, S. Tyagi, C. Weber, B. Woolery, A. Yeoh, K. Zhang, M. Bohr, International Electron Devices Meeting Technical Digest, December 2004, pp. 657–660] presenting the advantages brought by it. A better understanding regarding the boron diffusion behavior within and in the vicinity of SiGe is necessary to optimize the extension and the source/drain in pMOSFET. In order to achieve the goal, both effects from mechanical strain and Ge doping on boron diffusion have been investigated. However, only a few publications discuss the impacts of both. Furthermore, most researches investigate these two effects under the conditions of low boron concentration [P. Kuo, J.L. Hoyt, J.F. Gibbons, J.E. Turner, D. Lefforge, Appl. Phys. Lett. 66 (January (5)) (1995) 580–582; N.R. Zangenberg, J. Fage-Pedersen, J. Lundsgaard Hansen, A. Nylandsted Larsen, J. Appl. Phys. 94 (September (6)) (2003) 3883–3890] and high thermal budget anneal [P. Kuo, J.L. Hoyt, J.F. Gibbons, J.E. Turner, D. Lefforge, Appl. Phys. Lett. 66 (January (5)) (1995) 580–582; N.R. Zangenberg, J. Fage-Pedersen, J. Lundsgaard Hansen, A. Nylandsted Larsen, J. Appl. Phys. 94 (September (6)) (2003) 3883–3890; S. Eguchi, C.N. Chleirigh, O.O. Olubuyide, J.L. Hoyt, Appl. Phys. Lett. 84 (January (3)) (2004) 368–370] in which the equilibrium state of point defects is achieved. These are not the conditions used in aggressive CMOS technologies. Our experiment has therefore been designed to investigate boron diffusion in both strained and strain-relaxed SiGe including ultra-low energy, high concentration boron implant and spike RTA. Models are proposed and the retardation factors corresponding to Ge concentration and stress effect were successfully extracted through these experiments. This paper describes these experiments, with the calibration and the resulting diffusion constants for an ultra-shallow boron junction in SiGe that is popular in advanced CMOS technology.