Confinement Loss Research Articles

High stability with low polarization and confinement loss based new structure of photonic crystal fiber waveguide profile

Abstract Nowadays ethanol is broadly used chemical item in various industrial purpose. So, detection of this organic chemical has become very important task in industrial basis. In this paper, a hexagonal core PCF has constructed in which silica is used as base material. A finite element method is applied and mesh analysis has been done for investigating boundary conditions of proposed PCF sensor. After simulation, 59.48 % sensitivity and an ignorable loss of confinement which is 8·956020 × 10−13 cm−1 at 2.5 THz frequency has been gained. Focusing on easy construction of fiber, conventional fabrication procedures are attainable. Having satisfactory waveguiding attributes, the proposed sensor can be applicable effectively for sensing ethanol and also polarization-based applications of terahertz waves.

Numerical study of microstructured fiber with concentric dual rings for supporting orbital angular momentum mode propagation

A microstructured fiber with two concentric high-refractive-index rings is proposed to support more orbital angular momentum (OAM) beam propagations and OAM-based mode-division multiplexing (MDM) for improving the channel capacity and spectral efficiency. The two ring cores can be considered as two independent OAM channels without interference for enhancing more OAM channels. A finite element method (FEM) is employed to numerically study the properties of the designed fiber. A large effective refractive index difference between the adjacent OAM modes is achieved, which indicates that the propagated OAM modes can be well separated without multiple input, multiple output in each of the two rings. The calculated results demonstrate that a total of 80 OAM modes with a mode quality above 70% is achieved without any high-order radial modes from 1.5 to 1.6 μm, which contains 18 inner-ring OAM modes and 62 outer-ring OAM modes. Moreover, the designed fiber possesses low confinement loss (<2.2 × 10−7 dB m−1) and can be potentially utilized for high-capacity communications by OAM-based MDM.

All-Solid Single-Polarization Anti-Resonant Fiber Base on Anisotropic Glass

A single-polarization solid-core anti-resonant fiber is proposed, and the influence of the fiber core material anisotropy of the solid-core anti-resonant fiber on polarization characteristics is investigated using the finite element method. Single-polarization guidance is achieved by using the anisotropy of optical fiber materials, which also ensures high birefringence. The numerical simulation results indicate that there are two single-polarization intervals (1210–1440 nm and 1490–1560 nm), with a maximum bandwidth of up to 230 nm, when the confinement loss difference between the two orthogonal polarizations exceeds two orders of magnitude. Specifically, when the work wavelength is 1550 nm, a polarization extinction ratio (PER) of 108 is obtained by optimizing the structure parameters. Additionally, the y-polarization fundamental mode (YPFM) can be well confined in the fiber center with a low confinement loss of 0.04 dB/m, while the x-polarization fundamental mode (XPFM) has a huge confinement loss larger than 4.65 dB/m due to the coupling with the tube mode. The proposed single-polarization solid-core anti-resonant fiber has a huge potential in applications such as laser systems, fiber-optic gyroscopes, and optical fiber communications.

Design and simulation of Zeonex Based Suspended Microstructure Photonic Crystal Fiber for Chemical Sensing Application

Over the last few years for sensing applications in terahertz regime photonic crystal fiber (PCF) has gained attention quite extensively. The optical characteristics of photonic crystal fiber can be controlled by fine-tuning of the structural parameters like core radius and effecctive area. In this context, a terahertz sensor based on a hollow-core photonic crystal fiber has been developed for chemical identification in the terahertz frequency range with very low loss. The proposed structure contains hexagonal manner sectored suspension type cladding and hexagonal manner sectored core region, all the sector are formed by zeonex based struts. To investigate the optical characteristics of developed design, finite element method (FEM) based COMSOL multiphysics v.5.4a software has been used. The simulation result shows the sensitivity of 83.37% and 83.63% at the optimum condition in x-polarization mode for ethanol and benzene respectively with low effective material loss of 0.0291 cm−1 and low confinement loss of 1.87×10-13 cm-1. Moreover, the developed design implementation is possible in the existing fabrication method. Physical features and comparative performance analysis are also showed in this research. DUJASE Vol. 7 (2) 56-61, 2022 (July)

Terahertz detection of chemicals through zeonex fiber material

A PCF sensor is proposed for chemical (e.g., glycerol, acetic acid, and water) sensing through Zeonex fiber material. We investigate relative sensitivity, effective are, effective material loss, and confinement loss to analyze the sensor performance. The proposed sensor offers the relative sensitivity of almost 97.7% for glycerol, 96.25% for acetic acid, 95.28% for water at frequency 3.5 THz. In addition, the sensor possesses small effective material loss and tiny confinement loss that are important characteristics of an efficient chemical sensor. Furthermore, the modern fabrication techniques are well fitting for the fabrication of the presented sensor.

Anti-resonant based nested terahertz fiber design for illicit drugs detection

Anti-resonant hollow-core fibers (AR-HCFs) have gotten a lot of interest lately because of their potential uses in different medical sensing applications. In this work, an anti-resonant THz fiber (ATF) biosensor is implemented to check for illicit drugs and identify them at airport borders. Three different unlawful medicines have been chosen for the proposed design, Cocaine, Amphetamine, and Ketamine. A novel hollow-core anti-resonant fibers (HC-ARF) Matryoshka shape sensor has been designed for detecting the illegal drugs. The proposed design shows a robust sensitivity ranging from 99.8-99.9% and shallow confinement losses compared to other articles in the same field, as the higher losses are 9.3×10-4 dB/m with cocaine. Bending loss lessens as the bending radius rises while it is still below 1 dB/cm for radius more than 10 cm. The numerical simulation outcomes displayed that the designed HC-ARF has 0.0643±0.0238 ps/THz/cm flat dispersion at 0.6-2 THz. As the first application in this field, this work will be the first published in the literature.

Optimization of strip-based hybrid plasmonic terahertz waveguide with distributed Bragg reflector layers

In view of recent developments in the utilization of terahertz (THz) communications technology for the increasing demands of high speed and data rates for various wireless applications, this research work targets the design and analysis of distributed Bragg reflector (DBR)-based hybrid plasmonic THz waveguide. This THz waveguide operates at a frequency range from 2.5 to 3.5 THz. The proposed DBR-based hybrid plasmonic THz waveguide consists of DBR layers of gallium arsenide (GaAs) and aluminum arsenide, high-density polyethylene (HDPE) as substrate, a GaAs stripe for wave-guidance, and few layers of graphene layers in HDPE for better confinement. To increase the light confinement between DBR and graphene, a GaAs strip is placed into HDPE. By altering the width and height of the GaAs strip, the parameters birefringence, mode field diameter (MFD), confinement loss, effective mode area, beat length, and dispersion have been fully examined. The obtained simulation results shows high birefringence of 0.6276, maximum MFD of 45 mm, low confinement loss of 7.5 × 10 − 9 mm − 1, high effective mode area of 16.5 mm2, and low anomalous dispersion of 0.0023 (ps/THz/cm) in the range of 2.5 to 3.5 THz. This optimized THz waveguide may helps to enable in guided THz applications for photonic integrated circuits.

Design of elliptical photonic crystal fiber (E-PCF) for the transmission of 116 OAM channels across the S, C, L and U bands

Orbital angular momentum (OAM) modes over photonic crystal fibers (PCFs) have shown great capability in unleashing the available data rates in optical communication systems. In this paper, we propose and numerically design a novel elliptical photonic crystal fiber (E-PCF) using assisted Germania-doped silica as a material background and elliptical air holes. Using a systematic scanning methodology, we adjusted the E-PCF key parameters with the aim to explore appropriate designs that support large number of OAM channels featuring low confinement loss (CL). Numerical simulations using finite element method (FEM) show the supports of large number of independent/separate OAM channels (116 OAM with Δneff≥ 10−4). A detailed numerical modal analysis has been carried out over the S + C + L + U communication bands show that the designed E-PCF handles robust OAM modes. This includes low chromatic dispersion (CD = 92 ps/km/nm), low differential group delay (<60 ps/km), high effective mode area (max Aeff = 124 µm2), low nonlinearity coefficient (γ < 2.6 /W/m) and low confinement loss (Max CL = 2.07 × 10−4 dB/m). The obtained results and the comparisons with those recently reported in literature shows that the designed E-PCF could find applications in next-generation optical communication systems that uses OAM modes as data carriers.

Comparison of supercontinuum spectral widths in CCl4-core PCF with square and circular lattices in the claddings

In this study, we demonstrate the ability to generate a broad supercontinuum (SC) spectrum with a low peak power of square (S-PCF) and circular (C-PCF) lattice photonic crystal fibers with hollow-core infiltrated with carbon tetrachloride (CCl4). The dispersion and nonlinear characteristics have been numerically analyzed in detail and compared to select the optimal structures for SC generation and evaluate the SC generation efficiency for each PCF. With four optimal proposed structures, the all-normal dispersion of square PCF (#SF1) is found to be flatter and smaller. This results in its SC bandwidth reaching 901 nm at 1.095 μm pumping wavelength which is broader than that of circular PCF (#CF1) (768 nm at 0.98 μm wavelength) despite the lower nonlinear coefficient and higher confinement loss. For the anomalous dispersion regime, #CF2 fiber provides a wider SC spectrum (1753.1 nm) with a peak power of 10 kW compared to #SF2 (1689.6 nm) with a peak power of 13.75 kW thanks to the higher nonlinear coefficient and smaller confinement loss. With the higher nonlinearity of CCl4, the proposed fibers can be a new generation of optical fibers, suitable for low peak power all-fiber optical systems replacing glass core fibers.

Multi-octave supercontinuum generation of optical vortices in an As2S3 photonic crystal fibers with all-normal dispersion

We designed an all-normal flat near-zero dispersion As2S3 photonic crystal fiber (PCF) with orderly arranged air hole rings for generating an orbital angular momentum (OAM) supercontinuum (SC). We optimized the characters of chromatic dispersion and confinement loss compared with previous studies by carefully engineering the PCF. Simulation results show that, by launching a 100 fs 250 kW chirp-free hyperbolic secant pulse at 7 μm into a 5-mm designed PCF, a 9471-nm SC of OAM1,1 forms from 757 to 10228 nm at a −40 dB level, which covers a 3.7-octave bandwidth. As the peak power increases, the higher-order OAM with a flatter chromatic dispersion profile in the normal dispersion region has a wider bandwidth. They are all highly coherent in the whole spectral range.

A Hybrid Cladding Ring-Core Photonic Crystal Fibers for OAM Transmission with Weak Spin–Orbit Coupling and Strong Bending Resistance

A hybrid cladding ring-core photonic crystal fiber (PCF) for transmitting orbital angular momentum (OAM) modes is proposed, which breaks the circular symmetry of the fiber structure to suppress the spin–orbit coupling and promotes bending resistance. Through the optimization of fiber structure parameters, the designed fiber can support 22 OAM modes (6 OAM mode groups) over a 200-nm wide bandwidth (covering the whole C + L band) with large effective refractive index separation between adjacent modes (&gt;10−4) and mode groups (&gt;3.6 × 10−3), low confinement losses (&lt;3.5 × 10−9 dB/m), and high mode purity (&gt;98.3%). Meanwhile, the phase of the OAM modes varies periodically and uniformly with an increase in the azimuth angle, and the polarization of OAM modes maintain nearly circular polarization in the designed fiber, which also demonstrates that the fiber has weak spin–orbit coupling. Moreover, the confinement losses of all vector modes are less than 10−7 dB/m when the bending radius is larger than 0.8 mm, indicating strong bending resistance. Furthermore, the fiber also exhibits large differential group delay, relatively low and flat dispersion, and low nonlinear coefficients (&lt;2.0 W−1/km). Therefore, the novel fiber structure has great potential in the application of mode division multiplexing (MDM) based on OAM modes.

Design and Theoretical Analysis of Highly Negative Dispersion-Compensating Photonic Crystal Fibers with Multiple Zero-Dispersion Wavelengths

This paper presents a highly negative dispersion-compensating photonic crystal fiber (DC-PCF) with multiple zero dispersion wavelengths (ZDWs) within the telecommunication bands. The multiple ZDWs of the PCF may lead to high spectral densities than those of other PCFs with few ZDWs. The full-vectorial finite element method with a perfectly matched layer (PML) is used to investigate the optical properties of the PCFs. The numerical analysis shows that the proposed PCF, i.e., PCF (b), exhibits multiple ZDWS and also achieves a high negative chromatic dispersion of −15089.0 ps/nm·km at 1.55 μ m wavelength, with the multiple ZDWs occurring within the range from 0.8 to 2.0 μ m range. Other optical properties such as the confinement loss of 0.059 dB/km, the birefringence of 4.11 × 10 − 1 , the nonlinearity of 18.92 W − 1 k m − 1 , and a normalized frequency of 2.633 was also achieved at 1.55 μ m wavelength. These characteristics make the PCF suitable for high-speed, long-distance optical communication systems, optical sensing, soliton pulse transmission, and polarization-maintaining applications.

Surface plasmon resonance sensor composed of microstructured optical fibers for monitoring of external and internal environments in biological and environmental sensing

To achieve simultaneous detection of analytes with different states in internal and external environments, A microstructured optical fibers (MOFs) biochemical sensor based on surface plasmon resonance (SPR) is proposed. The micro-polished dual-open-loop structure with anti-corrosive gold as the sensing layer is designed, which greatly improves the phase matching between fundamental mode and plasmonic mode to further stimulate SPR effect. Numerical simulation by the full-vector finite element method (FEM) reveals that the even mode for y-polarized state has better sensing properties due to the more eminent electric field distribution and shift of the confinement loss peak. In order to better evaluate and analyze the output characteristics of this sensor, the wavelength modulation and amplitude interrogation methods are adopted. The results manifest that the maximum wavelength sensitivity (WS) of 20,000 nm/RIU and amplitude sensitivity (AS) of 208.21 RIU−1 with resolution (R) of 10−6 order can be acquired in operable infrared region (900–2,750 nm). Furthermore, this sensor has realized a broad range of detection for gas and liquid analytes with RIs from 1.00 to 1.38. On account of its simple structure, low cost, and industrial compatibility, this sensor has large potential in environmental and biological applications such as atmospheric monitoring, sewage treatment, food safety, humoral regulation, and medical diagnosis.

Terahertz fiber with multi-concentric ring cores for OAM modes propagation

A novel fiber incorporating central hollow, porous isolated layers, and concentric ring cores is proposed for the simultaneous propagation of multi-terahertz (THz) orbital angular momentum (OAM) modes with low-level inter-core and inter-mode crosstalk. The designed fiber can efficiently support 132 OAM modes in 0.6 ∼ 1.5 THz, 178 OAM modes in 0.7 ∼ 1.5 THz, etc, the high-order radial modes are suppressed within the whole frequency range meanwhile, and the number of OAM modes can be further boosted by further increasing the number of ring cores. In addition, the fiber has low confinement loss, flat dispersion, and high purity over a wide operating range. Hence it can be applied in mode-division multiplexing (MDM) based on OAM combined with core-division multiplexing (CDM) in THz range, and is also compatible with wavelength-division multiplexing (WDM) and multi-level modulation formats. The realized fiber is expected to dramatically extend the transmission capacity and spectral efficiency.

Ultra-wideband and coherent supercontinuum generation (near and mid-infrared) in dispersion flattened ZnGeP2 photonic crystal fiber

Transmission window is a major concern in selecting the background material of photonic crystal fiber for supercontinuum generation. In this work, Zinc-Germanium Diphosphide (ZnGeP2) based single material photonic crystal fiber has been proposed with high nonlinearity and low confinement loss for near and mid-infrared supercontinuum generation. As single material is used, hence the concerned difficulties for choosing separate materials for core and cladding is eliminated. Again, the light transmission window of ZnGeP2 is very large (700 nm – 13000 nm). Optical properties like dispersion, numerical aperture, effective area, nonlinearity and confinement loss are analyzed and demonstrated for a wavelength range of 1000 – 5000 nm. COMSOL software is used to design the fiber and finite element method (FEM) is adopted for numerical analysis. The proposed fiber presents low and flattened dispersion in the range of 2250 – 5000 nm, nonlinearity of the order of 104 W–1km−1 and confinement loss of the order of 10–9 dB/m. The fiber is then used for supercontinuum generation in both near and mid-infrared range and an unprecedented bandwidth of 31000 nm has been achieved which may be pragmatic for outstanding medical applications.

The response of high density turbidity currents and their deposits to an abrupt channel termination at a slope break: Implications for channel–lobe transition zones

ABSTRACTThe transition between the slope and basin floor is typically marked by a slope break, in some cases causing channels to terminate and turbidity currents to undergo a loss of confinement. It is thus essential to understand how these slope breaks and losses of confinement influence the hydrodynamic evolution of turbidity currents and impact their depositional variability within natural scale channel mouth settings. Flume experiments, utilizing Shields scaling, are conducted to study how channel slope angle (3°, 6° and 9°) and initial suspended sediment concentrations (12 to 18% by volume) impact the hydrodynamics and deposit geometries of high density turbidity currents, subject to a simultaneous break of slope and loss of confinement. Measured velocity and concentration profiles indicate that turbidity currents are supercritical, with mean velocities between 0.80 m s−1 and 1.04 m s−1 and depth‐averaged basal concentrations between 9.2% and 23.9%, yielding bed shear velocities between 0.050 m s−1 and 0.064 m s−1. Upon encountering the slope break and loss of confinement, turbidity currents exhibit increases to their densimetric Froude numbers and shear velocities. This is due primarily to two factors: firstly, turbidity currents continue to accelerate during an initial period of velocity lag as their residual momentum gradually dissipates; and, secondly, expansion via flow relaxation collapses their structure towards the bed. The corresponding depositional geometries of these processes reveal that turbidity currents produce elongate channel–lobe transition zones that disconnect channel and basin deposits. The length to width ratios of channel–lobe transition zones decrease as the initial sediment concentrations of turbidity currents increase, while a reduction in the channel slope break angle reduces their length to width ratios. Corresponding, lobe elements are observed to increase in length, width and thickness with increasing initial sediment concentrations, while a reduction in channel slope break angle reduces their dimensions due to enhanced slope deposition.

Artificial intelligence designer for optical Fibers: Inverse design of a Hollow-Core Anti-Resonant fiber based on a tandem neural network

In this work, artificial intelligence (AI) is trained to “study” optical fibers as an AI optical fiber scientist. The dataset is constructed on the structural parameters and confinement loss of hollow-core anti-resonant fibers and is divided into different datasets. An effective approach to overcome the non-uniqueness challenge of inverse designs is the tandem neural network (T-NN), which consists of a forward prediction model and an inverse design model, which are trained by different datasets. The impact of the hyperparameter on the performance of the proposed model is also studied. For the forward prediction model, the mean square error reaches the lowest value of 0.0007 with 6 hidden layers; the nodes of each hidden layer are 800, and the corresponding coefficient of determination R2 is 0.9154. Moreover, the R2CL of the T-NN can reach the maximum value of 0.9881 for the dataset-1-0. The comparison between the target, prediction result, and calculation result proves that the proposed approach is an effective way to design hollow-core anti-resonant fibers intelligently. Compared with current numerical simulation methods, the presented AI model based on the T-NN is more “intelligent”. This study can both accelerate the design of hollow-core anti-resonant fibers and provide guidance on the development of AI scientists in optics.

Polarization-maintaining large-mode-area solid-core anti-resonant fiber for high-power fiber lasers

A polarization-maintaining large-mode-area solid-core anti-resonant fiber is investigated in this work with double-layer anti-resonant elements for improved capability on fundamental mode guidance and higher order mode suppression, and structural and material asymmetry on inner-layer cladding tubes for high birefringence. Mode coupling between fundamental core mode in one polarization direction and mode on two high-index inner cladding tubes is used to enhance the fiber birefringence under large core diameter. Eventually, an optimized design of polarization-maintaining large-mode-area solid-core anti-resonant fiber with the currently largest mode field area of 3026 μm2 and birefringence of 1.20 × 10−5 can be anticipated with the confinement losses for all the higher order modes exceeding 10 dB/m. Moreover, confinement loss below 0.1 dB/m can still be obtained for the fundamental core mode in both polarization direction even under the mode-coupling effect. Active polarization-maintaining anti-resonant fiber is analyzed and the refractive index of the central rare-earth-doped region is optimized for the first time for both well guided signal and pump laser. Large pump absorption coefficient can thus be anticipated from the multimode laser core-pumped active large-mode-area fiber, which facilitates short active fiber length needed for sufficient laser gain. The fiber proposed here offers great potential for the development of high-performance fiber laser sources including high-power single-frequency fiber amplifiers and high-peak-power ultrashort pulsed fiber amplifiers.

Numerical study on the effects of scour on monopile foundations for Offshore Wind Turbines: The case of Robin Rigg wind farm

Scour around monopiles supporting Offshore Wind Turbines (OWT) may cause a significant reduction in the foundation capacity and the natural frequencies of the soil–structure system. The decommission of two monopiles at the Robin Rigg wind farm after only six years of operation due to massive unexpected scour demonstrates the hazard that an active marine environment poses to OWT. Assessing and predicting the quantitative impact of scour on monopile foundations from a point of view of the utilisation of the foundation capacity is hence crucial to its long-term structural and operational safety. Using finite element analysis, the present study quantifies the influence of scour through moment M and lateral load H (M−H) interaction curves and Load Utilisation (LU) ratios. It analyses the first and second natural frequencies of OWT exposed to different scour morphologies. This methodology is applied to a large-diameter monopile embedded in sand and to the scour-induced failed foundation of the Robin Rigg wind farm. The results indicate that, with increasing scour depth, the M−H capacity and the natural frequencies are reduced due to the loss of lateral confinement. The response of the system is found to depend on the rigidity of the pile governed by the slenderness ratio, the capacity of the soil to redistribute loads with increasing scour, and the effects of overburden pressure on deeper unscoured soil layers. The LU methodology has proven to be an appropriate and efficient approach to predict the long-term performance of scoured monopiles.

Deep neural network for microstructured polymer fiber modeling

Microstructured polymer fibers have been widely studied for terahertz waveguides, sensing, environmental monitoring, and medicine. Time-consuming methods, including the finite element method and finite-difference time-domain, have been used to design and simulate microstructure polymer fibers. Designing optimal artificial neural networks (ANN) with various hyperparameters for each optical property considerably improve the prediction accuracy. We compared and explained the differences between predicting one quantity at one time and predicting multiple quantities at the same time. We utilized the successfully trained ANN to accurately evaluate the optical properties of the unknown geometry, including the effective refractive index (), and effective mode area (). In addition, we took logarithmic transformation to form a more uniform distribution, which allowed us to successfully predict confinement loss (α c). We also demonstrated that ANN could predict the core mode properties of unknown geometric parameters in a considerably short time compared to the finite element method simulation. Moreover, ANN with ultrafast calculation speed and high prediction accuracy accelerate the optical function device design process.