Loratadine Research Articles

Sublingual Fast-Dissolving Thin Films of Loratadine: Characterization, In Vitro and Ex Vivo Evaluation.

Loratadine (LOR) is a second-generation antihistamine that exhibits a low and variable oral bioavailability (10-40%) and delayed onset owing to poor solubility and an extensive first-pass effect. Therefore, in light of the clinical need, the main goal of the present study was to develop sublingual fast-dissolving thin films of LOR-citric acid co-amorphous systems (LOR-CAs) with the aim of eliciting a faster onset and improving the bioavailability. We formulated sublingual fast-dissolving thin films of LOR by a film-casting technique using hydrophilic polymers like hydroxypropyl methylcellulose (HPMC E15), polyvinyl pyrrolidone K30 (PVP K30), and hydroxypropyl cellulose EL (HPC-EF) and citric acid as a pH modulator, while glycerin served as a plasticizer. The sublingual fast-dissolving thin films were characterized by FTIR, SEM, DSC, and XRD and evaluated for in vitro dissolution and ex vivo mucoadhesion. The best formulation (F1) developed using HPMC E15 as a polymer, glycerin as a plasticizer, and citric acid as a pH modulator was found to be the optimized formulation as it was smooth, clear, flexible, and displayed good mucoadhesion (11.27 ± 0.418 gm/cm2) and uniform thickness (0.25 ± 0.02 mm). The formulation F1 was found to display a significantly shorter DT (30.30 ± 0.6 s) and rapid release of LOR (92.10 ± 2.3% in 60 min) compared to other formulations (ANOVA, p < 0.001). The results indicated that the prepared sublingual films are likely to elicit a faster therapeutic effect, avoid first-pass metabolism, and improve the bioavailability.

Enhanced Oral Bioavailability and Stability Studies of Loratadine Tablets Based on Solid Dispersion of Modified Ziziphus spina-christi Gum

Background: Solid dispersion is a common technique used for solubility enhancement of poorly soluble drugs. Objective: In this study, loratadine (LOR), a class II biopharmaceutical classification system (BCS), was formulated as solid dispersion tablets using modified Ziziphus spina-christi gum (MZG) as a carrier. Methods: The solvent evaporation method was used for LOR-MZG solid dispersion (SD) preparation. A variety of tests were conducted to characterize and optimize the formulation. Solubility, Fourier transform infrared (FTIR) analysis, Differential Scanning Calorimetry (DSC), X-Ray Diffraction (X-RD), and Scanning Electron Micrograph (SEM) of solid dispersions were carried out. Accelerated stability testing and pharmacokinetic studies of formulated tablets were also performed using albino Wistar rats. Results: Solid dispersion improved the solubility of LOR by 51 folds. FTIR spectra excluded drugpolymer interactions, and results obtained by DSC, X-RD, and SEM proved the transition from the crystalline to the amorphous state. The stability of LOR-MZG solid dispersion tablets was found to be better when the Alu-Alu package was used. The pharmacokinetics of LOR-MZG compared to MZG-free loratadine tablets (LOR pure) and commercial loratadine tablets (LOR-TM) following oral administration revealed that about 6 folds and 10 folds bioavailability were achieved with LOR-MZG compared to LOR pure and LOR-TM, respectively. Conclusion: Such promising results encourage more studies on MZG to be used for improving the aqueous solubility and bioavailability of a wide range of poorly soluble drugs.

Ecotoxicological study of seven pharmaceutically active compounds: Mixture effects and environmental risk assessment

Pharmaceutically active compounds (PhACs) have been detected in several aquatic compartments, which has been of environmental concern since PhACs can cause adverse effects on the aquatic ecosystem at low concentrations. Despite the variety of PhACs detected in surface water, ecotoxicological studies are non-existent for many of them, mainly regarding their mixture. In addition, water bodies can continuously receive the discharge of raw or treated wastewater with micropollutants. Thus, PhACs are subject to mixture and interactions, potentiating or reducing their toxicity. Therefore, the present study evaluated the toxicity on Aliivibrio fischeri of seven PhACs, which still needs to be explored in the literature. The effects were evaluated for the PhACs individually and for their binary and tertiary mixture. Also, the experimental effects were compared with the concentration addition (CA) and independent action (IA) models. Finally, an environmental risk assessment was carried out. Fenofibrate (FEN), loratadine (LOR), and ketoprofen (KET) were the most toxic, with EC50 of 0.32 mg L-1, 6.15 mg L-1 and 36.8 mg L-1, respectively. Synergistic effects were observed for FEN + LOR, KET + LOR, and KET + FEN + LOR, showing that the CA and IA may underestimate the toxicity. Environmental risks for KET concerning algae, and LOR e 17α-ethynylestradiol (EE2) for crustaceans and fish were high for several locations. Besides, high removals by wastewater treatment technologies are required to achieve the concentrations necessary for reducing KET and LOR risk quotients. Thus, this study contributed to a better understanding of the toxic interactions and environmental risks of PhACs.

Unravelling Microarray Patch Performance: The Role of In Vitro Release Medium and Biorelevant Testing.

The absence of established protocols for studying the in vitro performance of dissolvable microarray patches (MAPs) poses a significant challenge within the field. To overcome this challenge, it is essential to optimize testing methods in a way that closely mimics the skin's environment, ensuring biorelevance and enhancing the precision of assessing MAP performance. This study focuses on optimizing in vitro release testing (IVRT) and in vitro permeation testing (IVPT) methods for MAPs containing the antihistamine drugs loratadine (LOR) and chlorpheniramine maleate (CPM). Our primary objective is to investigate the impact of the composition of in vitro release media on the drug release rate, penetration through the skin, and permeation into the release medium. Artificial interstitial fluid is introduced as a biorelevant release medium and compared with commonly used media in IVRT and IVPT studies. Prior to these studies, we evaluated drug solubility in different release media and developed a method for LOR and CPM extraction from the skin using a design of experiment approach. Our findings highlight the effect of the in vitro release medium composition on both LOR and CPM release rate and their penetration through the skin. Furthermore, we identified the importance of considering the interplay between the physicochemical attributes of the drug molecules, the design of the MAP formulation, and the structural properties of the skin when designing IVRT and IVPT protocols.

Formulation, development, and characterization of loratadine emulgel

Background: This study was to develop loratadine (LTD) emulgels to treat localized skin allergy. Method: Initially oil-in-water emulsion was prepared by 3 different types of surfactants &amp; finally gelling agent carbopol 940 was incorporated into emulsion to produce emulgel (i.e., standard conventional method). Results: The developed formulations were characterized using various parameters including particle size (PS), zeta potential (ZP), polydispersity index (PDI), entrapment efficacy (EE), pH, extrusion efficacy, physical stability, in-vitro drug release studies, and scanning electron microscopy (SEM). PS, EE, PDI, ZP and In-vitro studies ranges between 186.25 ± 6.42 mm (LE-F4) to 395.24 ± 8.64 mm (LE-F1), 62.38 ± 0.36 % (LE-F2) to 76.48 ± 0.69 % (LE-F4), 0.276 ± 0.02 (LE-F4) to 0.652 ± 0.02 (LE-F1), 16.45 ± 2.13 mV (LE-F1) to 29.46 ± 2.78 mV (LE-F3) and 21.90 ± 0.3 % (LE-F1) to 68.30±0.9 % (LE-F4) respectively. Conclusion: Based on all physicochemical properties, LE-F4 formulation was considered to be optimized with minimum PS (186.25±6.42 nm), PDI (0.276±0.02), satisfactory positive surface charge (23.15 ± 1.89 mV) and maximum EE (76.48±0.69 %). FTIR studies were confirmed that there is no physical interaction between drug and excipients and SEM studies revealed that vesicle size was spherical with smooth texture. A significantly greater rate of drug release (i.e., 68.30 ± 0.90%) was seen in the LTD emulgels that were made with cationic surfactant (i.e., LE-F4) and found to be good spreadability and extrudability.

Application of 32 factorial design for loratadine-loaded nanosponge in topical gel formulation: comprehensive in-vitro and ex vivo evaluations.

Loratadine (LoR) is a highly lipophilic and practically insoluble in water, hence having a low oral bioavailability. As it is formulated as topical gel, it competitively binds with the receptors, thus reducing the side-effects. The objective of this study was to prepare LoR loaded nanosponge (LoR-NS) in gel for topical delivery. Nine different formulations of emulsion were prepared by solvent evaporation method with polyvinyl alcohol (PVA), ethyl cellulose (EC), and dichloromethane (DCM). Based on 32 Full Factorial Design (FFD), optimization was carried out by varying the concentration of LOR:EC ratio and stirring rate. The preparations were subjected for the evaluation of particle size (PS), in vitro release, zeta potential (ZP) and entrapment efficiency (EE). The results revealed that the NS dispersion was nanosized with sustained release profiles and significant PS. The optimised formulation was formulated and incorporated into carbopol 934P hydrogel. The formulation was then examined to surface morphological characterizations using scanning electron microscopy (SEM) which depicted spherical NS. Stability studies, undertaken for 2months at 40 ± 2°C/75 ± 5% RH, concluded to the stability of the formulation. The formulation did not cause skin irritation. Therefore, the prepared NS hydrogel proved to be a promising applicant for LoR as a novel drug delivery system (NDDS) for safe, sustained and controlled topical application.

DESIGN, DEVELOPMENT, AND CHARACTERIZATION OF LORATADINE SUSTAINED RELEASED BUCCAL FILM: IN VITRO AND IN VIVO STUDY IN BEAGLE DOGS

Objective: The aim of this work was to develop and evaluate bucco-adhesive films of Loratadine (LTD) for sustained release use. Methods: Design of twelve different sustained released buccal film formulas using Carbopol, pectin, sodium alginate, glycerol, carboxymethyl cellulose (CMC), hydroxypropyl cellulose (HPC), Gelatin, Hydroxyethyl cellulose (HEC), and Hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers. Films were evaluated for physicochemical properties, thickness, swelling, moisture content, drug content, in vitro dissolution. The pharmacokinetic parameters of optimal formula were evaluated in beagle dogs. Results: The selected film formula (F6) showed accepted content and muco-adhesion properties. The in vitro release study showed prolonged release of drug from films over 10 h in optimal formulation. The bioavailability studies performed using beagle dogs model showed that there was 113.45% increase in the AUC0-24 of selected film compared with oral market tablets. Conclusion: Bucco-adhesive films is a promising dosage form for improving the bioavailability of loratadine.

The influence of natural polymers on loratadine's solubility and dissolution profiles.

Second-generation tricyclic H1 antihistamine loratadine (LTD) has a high permeability, low water solubility, and an oral absorption rate dependent on the rate at which it dissolves in the gastrointestinal tract. One approach suggested for improving the drug's solubility and rate of dissolution is natural solid dispersion (NSD). The present study evaluated the use of hydrophilic natural polymers, sodium alginate (SA), hyaluronic acid (HA), and xyloglucan (XG), in natural solid dispersion to enhance LTD solubility and dissolution rate. A total of 12 formulations comprising varied drug-to-polymer ratios were produced and analyzed for percentage yield, water solubility, and in vitro dissolution rate. The solubility of LTD was improved in all formulations. Excellent results were achieved with NSD1 (LTD: SA 1:0.25), with a high yield (99%), superior solubility (0.187) compared to pure loratadine (0.0021), and a speedy dissolution rate (98%) within 30 minutes. These studies suggest natural polymers like SA, HA, and XG can considerably increase LTD solubility. When introduced into NSD, these polymers effectively augment LTD dissolving rates, presenting attractive prospects for better bioavailability and therapeutic efficacy.

Amelioration of acetic acid-induced ulcerative colitis in rats by cetirizine and loratadine via regulation of the PI3K/Akt/Nrf2 signalling pathway and pro-inflammatory cytokine release.

Ulcerative colitis is a chronic inflammatory bowel disease (IBD) that causes inflammation and ulcers in the rectum and the innermost layer of the large intestine. Our study aimed to elucidate the ameliorative effect of cetirizine (CTZ) and loratadine (LOR) against acetic acid-induced ulcerative colitis in rats via assessment of the PI3K/p-Akt/Nrf2 signaling pathway and proinflammatory cytokine release. Thirty-two rats were allocated into four groups (n=8). Group (I) was considered normal control. Acetic acid (AA) was injected intrarectally in groups (2-4). Group (2) was kept untreated. Group (3) was administered CTZ (20 mg/kg/day) for 7 days. Group (4) was administered LOR (10 mg/kg/day) for 7 days. AA showed severe macroscopic colonic lesions associated with increased ulcer number, area, and severity with significantly elevated PI3K, p-Akt, Nrf2, TNF-α, and IL-6 in colorectal tissue as compared to the normal control group. All the aforementioned indicators were greatly improved by CTZ and LOR therapy. This is the first study to elucidate the ameliorative effect of CTZ and LOR against AA-induced UC in rats. CTZ and LOR treatment mitigates UC via amelioration of the PI3K/p-Akt/Nrf2 pathway and proinflammatory cytokine release.

Formulation development and evaluation of Loratadine (LOR) loaded electrospun nanofiber film for buccal delivery

Formulation development and evaluation of Loratadine (LOR) loaded electrospun nanofiber film for buccal delivery

Trypanocidal activity of liposomal isotretinoin and loratadine formulations

We previously identified the antihistamine loratadine (LTD) and the medication for severe acne isotretinoin (ISO), as repositioned drugs for Chagas disease that showed strong activity against Trypanosoma cruzi. In this study, we evaluated the trypanocidal efficiency of LTD and ISO using liposomes that increase their low water solubility and facilitate their internalization allowing the reduction of the drug effective dose.Liposomes were prepared with phosphatidylcholine and cholesterol, and coated with chitosan. The average diameter, polydispersity index and Zeta-potential of LTD, ISO and unloaded liposomes were characterized by dynamic light scattering. The drug encapsulation efficiency in vesicles was determined by high performance liquid chromatography. Their trypanocidal effects were evaluated on the T. cruzi parasites.ISO and LTD liposomes inhibited epimastigote proliferation and trypomastigote viability of T. cruzi, and both formulations were significantly more potent than benznidazole, the drug currently used to treat Chagas disease. We also showed that the storage stability of ISO, that represents a relevant issue, was improved after encapsulated it in liposomes.This encapsulation of LTD and ISO in liposomes that significantly increased their trypanocidal effect and stability, encourage the use of carriers as drug delivery systems.

Incorporation of Loratadine-Cyclodextrin Complexes in Oral Thin Films for Rapid Drug Delivery

Rapidly dissolving polymer thin films, or oral thin films (OTFs), have recently emerged as an improved oral drug delivery vehicle with its ability to bypass liver first pass metabolism, longer shelf-life, and simpler transport and distribution requirements, compared to traditional tablets and liquid formulations. Loratadine (LOR), an antihistamine commonly used to treat allergic rhinitis, undergoes liver first pass metabolism and is a prime candidate for incorporation within an OTF. However, loratadine is a BCS II drug with low aqueous solubility. Herein, the solubility of loratadine was improved by complexation with methyl β-cyclodextrin (MBCD) by co-evaporation of 2:1, 1:1, and 1:2 LOR:MBCD ratios and incorporation into a pullulan-based OTF at 4 wt% by solvent casting at 50 °C for 30 – 35 min. A therapeutically relevant 10 mg LOR dose could be prepared in a 3 cm by 3 cm OTF. The feasibility of complexation was observed with a Bs-type phase solubility diagram, and complexation itself was confirmed via differential scanning calorimetry (DSC) by disappearance of the LOR melting peak, Fourier-transform infrared spectroscopy (FTIR) by shifting of the C=O peak, via 1H NMR spectroscopy by downfield shifting and change in peak multiplicity of the LOR aromatic protons, and via diffusion-ordered spectroscopy by a decrease in the diffusion coefficient of LOR:MBCD complex. LOR:MBCD could be incorporated homogeneously throughout an OTF, and LOR:MBCD OTFs exhibited reasonable mechanical strength and endured 12 ± 3 folds before breaking. LOR:MBCD OTFs disintegrated within 38 ± 10 s. The cumulative in vitro release of LOR:MBCD OTFs peaked at 80 % within 3–4 min of dissolution, and LOR in LOR:MBCD OTFs exhibited permeability across a 0.22 μm nitrocellulose membrane, demonstrating its applicability as a rapid drug delivery vehicle.

Solubility and Physical Stability Enhancement of Loratadine by Preparation of Co-Amorphous Solid Dispersion with Chlorpheniramine and Polyvinylpyrrolidone.

Loratadine (LRD), a non-sedating and slow-acting antihistamine, is often given in combination with short-onset chlorpheniramine maleate (CPM) to increase efficacy. However, LRD has poor water solubility resulting in low bioavailability. The aim of this study was to improve LRD solubility by preparing co-amorphous LRD-CPM. However, the obtained co-amorphous LRD-CPM recrystallized rapidly, and the solubility of LRD returned to a poor state again. Therefore, co-amorphous LRD-CPM solid dispersions using polyvinylpyrrolidone (PVP) as a carrier were prepared. The obtained solid dispersions were characterized using X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR). The solubility, dissolution, and mechanism of drug release from the LRD-CPM/PVP co-amorphous solid dispersions were studied and compared with those of intact LRD, LRD/PVP solid dispersions, and co-amorphous LRD-CPM mixtures. The results from XRPD and DSC confirmed the amorphous form of LRD in the co-amorphous solid dispersions. The FTIR results indicated that there was no intermolecular interaction between LRD, CPM, and PVP. In conclusion, the obtained LRD-CPM/PVP co-amorphous solid dispersions can successfully increase the water solubility and dissolution of LRD and extend the amorphous state of LRD without recrystallization.

Loratadine oral bioavailability enhancement via solid dispersion loaded oro-dispersible films: Formulation, characterization and pharmacokinetics.

Loratadine (LRD) belongs to second-generation tricyclic H1 antihistamine class, known for its non-sedating properties in allergic reactions. H1 antihistamines avoid and block the responses to allergens or histamine in nose and conjunctivae, thereby abolishing itching, congestion and sneezing. LRD is a Biopharmaceutical Class System (BCS) class II drug with dissolution or solubility limited absorption which limited the oral bioavailability and therapeutic efficacy of LRD. To improve the oral bioavailability of LRD for allergic disease (urticaria) treatment, LRD solid dispersions (LRD-SDs) were integrating into oro-dispersible films (ODFs). LRD-SDs were prepared through hot-melt extrusion method (HME) using d-alpha-tocopherol polyethylene glycol 1000 succinate (TPGS-1000), and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (SP). Subsequently, LRD-SDs were incorporated in ODFs by solvent casting method. The physicochemical and mechanical properties of LRD solid dispersions-loaded oro-dispersible films (LRD-SDs-ODFs), were evaluated. The in-vitro dissolution, ex-vivo permeation, oral bioavailability, and pharmacodynamics studies were conducted to evaluate LRD-SDs-ODFs efficiency. LRD-SDs-ODFs showed superior solubility and in-vitro dissolution results compared to that of pure LRD (p<0.05). The solubility of the LRD-SD coded as LTS-4 was 190 times higher than the pure drug in aqueous media. The average hydrodynamic particle size (PS), polydispersity index (PDI), and zeta potential (ZP) of SD particles were 76±2.1nm, 0.20±0.08 and -19.16±1.4mV, respectively. Moreover, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results confirmed the amorphousness of LRD in LRD-SDs-ODFs. The permeability flux of LRD was 44.6±3.1μg/cm2/h from DPF-5 formulation. Likewise, in vivo oral bioavailability of DPF-5 in Sprague-Dawley rats was significantly increased (p<0.05) compared to free LRD. Further, wheal area was reduced 20 % higher than LRD in 8h (p<0.05). Overall, LRD-SDs-ODFs considerably enhanced LRD solubility, dissolution rate, bioavailability, and antihistaminic efficacy. Our findings show that SDs-ODFs is an effective carrier system for delivering poorly soluble LRD.

Exploring the Potential Link between Acute Central Serous Chorioretinopathy and Trimethylamine N-Oxide, Phoenixin, Spexin, and Alarin Molecules.

Acute central serous chorioretinopathy (ACSCR) is a condition characterized by decreased visual acuity, macular thickening, and edema under the retinal layer. Although the underlying mechanisms of the disease are not fully understood, oxidative stress is considered to be a critical risk factor. The aim of this study was to shed light on the pathophysiology of ACSCR by investigating the levels of circulating trimethylamine N-oxide (TMAO), phoenixin (PNX), alarin (ALA), and spexin (SPX) molecules in ACSCR patients. The study included 30 ACSCR patients and 30 healthy individuals as controls. ACSCR was diagnosed using optical coherence tomography (OCT) imaging. Five mL blood samples were collected from all participants following overnight fasting. The levels of TMAO, PNX, ALA, and SPX in the blood samples were measured using the ELISA method. Visual acuity was found to be significantly reduced in ACSCR patients compared to the control group (<0.05), while macular thickness was increased (<0.05). Furthermore, TMAO, PNX, and ALA levels were significantly higher in ACSCR patients (<0.05), while SPX levels were significantly lower compared to the control group (<0.05). In ACSCR patients, there was a positive correlation between macular thickness and TMAO, PNX, and ALA; there was, however, a negative correlation with SPX. Additionally, visual acuity was negatively correlated with TMAO, PNX, and ALA, while SPX levels decreased as visual acuity decreased. These results demonstrate a correlation between the TMAO, PNX, ALA, and SPX levels of ACSCR patients and their visual acuity and macular thickness. Given the role of these molecules in ACSCR's pathophysiology, they hold promise as potential diagnostic, therapeutic, and follow-up markers in the future.

Dual fluorescence enhancement of loratidine by photoinduced electron transfer blocking and micellization: Application to the development of novel highly sensitive microwell spectrofluorimetric assay for analysis of dosage forms and urine samples

This study describes the enhancement of the weak native fluorescence of loratadine (LOR) by dual strategy via photoinduced electron transfer (PET) blocking followed by micellization into sodium dodecyl sulfate micelles. The enhanced fluorescence was employed as a basis for the development of a novel microwell spectrofluorimetric assay (MW-SFA) for the determination of LOR in its pharmaceutical dosage forms and urine samples. The assay was conducted in 96-microwell assay plates, and the enhanced fluorescence signals were measured by a microplate reader at 290 and 435 nm for excitation and emission, respectively. The optimum conditions of the assay were established, calibration curve was generated, and the linear regression equation was computed. The relation between the fluorescence signals and LOR concentrations was linear with good determination coefficients (0.9992) in the range of 10 – 2000 ng mL−1. The assay limits of detection and quantitation were 4.1 and 12.5 ng mL−1, respectively. The precision was satisfactory, with values of relative standard deviation not exceeding 1.68%, and the assay’s accuracy was ≥ 99.1%. The proposed was successfully applied to the analysis of LOR in its pharmaceutical dosage forms with acceptable accuracy and precision. The label claims were 99.3 – 100.5% (±0.95 – 1.59%). Statistical analysis comparing the results of the proposed assay with those obtained by a reported pre-validated assay revealed no significant difference between both methods in terms of the accuracy and precision at the 95% confidence level. The assay was also applied to the analysis of urine samples containing LOR with accuracy ≥ 98.24%. The greenness of the proposed assay was confirmed by three efficient metric tools. In overall conclusion, the proposed assay is characterized by high sensitivity, procedure simplicity, and high throughput, enabling the simultaneous analysis of many samples in a short time. Therefore, it is a valuable tool for rapid routine application in pharmaceutical quality control units and clinical laboratories for the determination of LOR.

Simultaneous Determination of Montelukast Sodium and Loratadine by Eco-Friendly Densitometry and Spectrophotometric Methods.

Recently, the aim of analytical community is to reduce the usage of hazardous chemicals; so eco-friendly, rapid, selective and cost-effective methods were developed for simultaneous determination of montelukast sodium (MKT) and loratadine (LRT). The first method was based on chromatographic separation performed on precoated silica gel 60 GF254 plates with ethyl acetate-ethanol 9: 1 (v/v) as the mobile phase. The developed plates were scanned and quantified at 260nm. The method gives linear correlation over concentration ranges of 0.3-3.6μg/spot and 0.2-4.0μg/spot for MKT and LRT, respectively. It was also successfully applied to analysis of both drugs in their pharmaceutical preparation and human plasma. The other methods are UV-spectrophotometric methods based on smart spectra manipulating to zero order spectrum of each drug. These methods are named response correlation (RC), a-centering and ratio derivative methods. RC and a-centering methods were dependent on the presence of an isosbestic point between the overlapped spectra of both drugs. While ratio derivative method based on manipulation of the ratio spectra of both drugs. The two drugs obey Beer-Lambert law over the concentration ranges of 3.0-30.0μg/mL in the three spectrophotometric methods. Moreover, the greenness of the developed methods is assessed using suitable analytical Eco-Scale and Green Analytical Procedure Index.

Rosmarinic acid ameliorates skin inflammation and pruritus in allergic contact dermatitis by inhibiting mast cell-mediated MRGPRX2/PLCγ1 signaling pathway.

Allergic contact dermatitis (ACD) is one of the most common dermatoses, which has high disease burden and quality of life impairment. Anti-histamine is not effective in a part of the ACD patients. Thus, the discovery of novel antipruritic therapy is of highly demand. In this study, we investigated the anti-pruritic effects of rosmarinic acid (RA) and explored the underlying mechanism. SPF Balb/c mice were randomly divided into control group, ACD model group, RA group (1.0mg/kg) and loratadine (LORA) group (1.5mg/kg). Back epidermal thickness was recorded. H&E staining was used for pathological observation. Mast cell degranulation was assessed by toluidine blue staining. ELISA assay was employed to detect cytokines levels. Cortistatin-14 (CST-14) and Mas-related G protein-coupled receptor X2 (MRGPRX2) expression was detetcted by RT-PCR and western blot. Molecular docking assay was used to predict the affinity of RA and MRGPRX2. Surface plasmon resonance (SPR) assay was used to verify structure affinity of RA and MRGPRX2. RA treatment significantly decreased epidermal keratinization and inflammatory cell infiltration in ACD mouse model. Administration of RA significantly reduced secretion of histamine, IL-13, and mRNA expression of CST-14. Furthermore, RA treatment increased mRNA expression of MRGPRX2. In addition, Molecular docking results predict that RA has a good affinity with MRGPRX2. RA displayed a structure affinity (KD=8.89×10-4) with MRGPRX2 by SPR. RA inhibited CST-14 and Compound 48/80 (C48/80)-induced mast cell activation via MRGPRX2-PLCγ1-PKC-NF-κB signaling pathway. RA exhibits anti-pruritic and anti-inflammatory effects in ACD mice by inhibiting MRGPRX2-PLCγ1-PKC-NF-κB signaling pathway. RA might emerge as a potential drug for the treatment of pruritus and skin inflammation in the setting of ACD.

Amorphous Solid Dispersions Layered onto Pellets—An Alternative to Spray Drying?

Spray drying is one of the most frequently used solvent-based processes for manufacturing amorphous solid dispersions (ASDs). However, the resulting fine powders usually require further downstream processing when intended for solid oral dosage forms. In this study, we compare properties and performance of spray-dried ASDs with ASDs coated onto neutral starter pellets in mini-scale. We successfully prepared binary ASDs with a drug load of 20% Ketoconazole (KCZ) or Loratadine (LRD) as weakly basic model drugs and hydroxypropyl-methyl-cellulose acetate succinate or methacrylic acid ethacrylate copolymer as pH-dependent soluble polymers. All KCZ/ and LRD/polymer mixtures formed single-phased ASDs, as indicated by differential scanning calorimetry, X-ray powder diffraction and infrared spectroscopy. All ASDs showed physical stability for 6 months at 25 °C/65% rH and 40 °C/0% rH. Normalized to their initial surface area available to the dissolution medium, all ASDs showed a linear relationship of surface area and solubility enhancement, both in terms of supersaturation of solubility and initial dissolution rate, regardless of the manufacturing process. With similar performance and stability, processing of ASD pellets showed the advantages of a superior yield (>98%), ready to use for subsequent processing into multiple unit pellet systems. Therefore, ASD-layered pellets are an attractive alternative in ASD-formulation, especially in early formulation development at limited availability of drug substance.

Breakdown of isochronal superpositioning of [formula omitted]- and [formula omitted]-relaxation times in the van der Waals system – Loratadine

In this paper, high-pressure (HP) dielectric studies on the van der Waals active pharmaceutical ingredient (API) - loratadine (LOR) were carried out. It was found that, surprisingly, the secondary (β) relaxation, which, according to the Coupling Model (CM) predictions, was classified as a Johari-Goldstein (JG) process, separates from the structural (α)-mode with compression (although the shape of the α-peak is invariant to the thermodynamic conditions at constant τα). Consequently, there is a breakdown of the isochronal superpositioning of α- and β- relaxation times (τα and τβ) in this system, which is a typical behavior for the secondary process with intermolecular character. Based on these findings, two possibilities concerning the origin of the β-relaxation in LOR have been proposed: 1) it is a non-JG process (probably originating from fluctuations within cyclic rings of the API molecule), which, however, satisfies the CM predictions; or 2) it is a JG-process, which similarly to a few earlier examined H-bonded compounds (e.g., probucol and sorbitol) is characterized by a different sensitivity to compression when compared to the α-process. Moreover, it was found that the activation entropy for the β-process takes negative values, irrespective of the pressure conditions. That may be interpreted as a result of conformational variation or the loss of translational and rotational degrees of freedom, leading to increased order in API due to densification. The results presented herein give a new insight into the relationship between the structural and secondary relaxations in the close vicinity of the glass transition temperature. Furthermore, they show that HP studies are crucial in elucidating the correlation between these processes.