Loop-mediated Isothermal Amplification Technique Research Articles

Validation and optimization of the loop-mediated isothermal amplification (LAMP) technique for rapid detection of wheat stripe mosaic virus, a wheat-infecting pathogen

BackgroundWheat stripe mosaic virus (WhSMV) is a significant wheat pathogen that causes substantial yield losses in Brazil and other countries. Although several detection methods are available, reliable and efficient tools for on-site WhSMV detection are currently lacking. In this study, a Loop-Mediated Isothermal Amplification (LAMP) method was developed for rapid and reliable field detection of WhSMV. We designed WhSMV-specific primers for the LAMP assay and optimized reaction conditions for increased sensitivity and specificity using infected plant samples. ResultsWe have developed a diagnostic method utilizing the Loop-Mediated Isothermal Amplification (LAMP) technique capable of rapidly and reliably detecting WhSMV. The LAMP assay has been optimized to enhance sensitivity, specificity, and cost-effectiveness. ConclusionThe LAMP assay described here represents a valuable tool for early WhSMV detection, serving to mitigate the adverse economic and social impacts of this viral pathogen. By enabling swift and accurate identification, this assay can significantly improve the sustainability of cereal production systems, safeguarding crop yields against the detrimental effects of WhSMV.

Ultra-sensitive colorimetric detection of SARS-CoV-2 by novel gold nanoparticle (AuNP)-assisted loop-mediated isothermal amplification (LAMP) and freezing methods.

Loop-mediated isothermal amplification (LAMP) is a molecular diagnosis technology with the advantages of isothermal reaction conditions and high sensitivity. However, the LAMP reactions are prone to producing false-positive results and thus are usually less reliable. This study demonstrates a gold nanoparticle (AuNP)-assisted colorimetric LAMP technique for diagnosing SARS-CoV-2, which aims to overcome the false-positive results. The AuNPs were functionalized with E gene probes, specifically tailored to bind to the amplified E-gene LAMP product, using the freezing method. Varied salt concentration and AuNP/probe combinations were tested for the highest visual performance. The experiments were conducted on synthetic SARS-CoV-2 RNA (Omicron variant), as well as on clinical samples. The assay showed an exceptional sensitivity of 8.05fg of LAMP amplicon mixture (0.537fg/µL). The average reaction time was ~ 30min. In conclusion, AuNP-assisted LAMP detection will not identify any potential unspecific amplification, which helps to improve the efficiency and reliability of LAMP assays in point-of-care applications. The freezing method to functionalize the AuNPs with probes simplifies the assay, which can be utilized in further diagnostic studies.

Use of the 23S rRNA gene as a target template in the universal loop-mediated isothermal amplification (LAMP) of genomic DNA from phytoplasmas.

Plant-pathogenic bacteria cause numerous diseases in host plants and can result in serious damage. Timely and accurate diagnostic techniques are, therefore, crucial. While advances in molecular techniques have led to diagnostic systems able to distinguish known plant pathogens at the species or strain level, systems covering larger categories are mostly lacking. In this study, a specific and universal LAMP-based diagnostic system was developed for phytoplasmas, a large group of insect-borne plant-pathogenic bacteria that cause significant agricultural losses worldwide. Targeting the 23S rRNA gene of phytoplasma, the newly designed primer set CaPU23S-4 detected 31 'Candidatus Phytoplasma' tested within 30 min. This primer set also showed high specificity, without false-positive results for other bacteria (including close relatives of phytoplasmas) or healthy plants. The detection sensitivity was ~10,000 times higher than that of PCR methods for phytoplasma detection. A simple, rapid method of DNA extraction, by boiling phytoplasma-infected tissues, was developed as well. When used together with the universal LAMP assay, it enabled the prompt and accurate detection of phytoplasmas from plants and insects. The results demonstrate the potential of the 23S rRNA gene as a versatile target for the LAMP-based universal detection of bacteria at the genus level and provide a novel avenue for exploring this gene as molecular marker for phytoplasma presence detection.IMPORTANCEPhytoplasmas are associated with economically important diseases in crops worldwide, including lethal yellowing of coconut palm, "flavescence dorée" and "bois noir" of grapevine, X-disease in stone fruits, and white leaf and grassy shoot in sugarcane. Numerous LAMP-based diagnostic assays, mostly targeting the 16S rRNA gene, have been reported for phytoplasmas. However, these assays can only detect a limited number of 'Candidatus Phytoplasma' species, whereas the genus includes at least 50 of these species. In this study, a universal, specific, and rapid diagnostic system was developed that can detect all provisionally classified phytoplasmas within 1 h by combining the LAMP technique targeting the 23S rRNA gene with a simple method for DNA extraction. This diagnostic system will facilitate the on-site detection of phytoplasmas and may aid in the discovery of new phytoplasma-associated diseases and putative insect vectors, irrespective of the availability of infrastructure and experimental resources.

Simultaneous Dual-Gene Test of Methicillin-Resistant Staphylococcus Aureus using an Argonaute-Centered Portable and Visual Biosensor.

The development of novel method for drug-resistant bacteria detection is imperative. A simultaneous dual-gene Test of methicillin-resistant Staphylococcus aureus (MRSA) is developed using an Argonaute-centered portable biosensor (STAR). This is the first report concerning Argonaute-based pathogenic bacteria detection. Simply, the species-specific mecA and nuc gene are isothermally amplified using loop-mediated isothermal amplification (LAMP) technique, followed by Argonaute-based detection enabled by its programmable, guided, sequence-specific recognition and cleavage. With the strategy, the targeted nucleic acid signals gene are dexterously converted into fluorescent signals. STAR is capable of detecting the nuc gene and mecA gene simultaneously in a single reaction. The limit of detection is 10 CFU/mL with a dynamic range from 10 to 107 CFU/mL. The sample-to-result time is <65min. This method is successfully adapted to detect clinical samples, contaminated foods, and MRSA-infected animals. This work broadens the reach of Argonaute-based biosensing and presents a novel bacterial point-of-need (PON) detection platform.

Enhancing Loop-Mediated Isothermal Amplification through Nonpowered Nanoelectric Preconcentration.

The global threat posed by the COVID-19 pandemic has catalyzed the development of point-of-care (POC) molecular diagnostics. While loop-mediated isothermal amplification (LAMP) stands out as a promising technique among FDA-approved methods, it is occasionally susceptible to a high risk of false positives due to nonspecific amplification of a primer dimer. In this work, we report an enhancing LAMP technique in terms of assay sensitivity and reliability through streamlined integration with a nonpowered nanoelectric preconcentration (NPP). The NPP, serving as a sample preparation tool, enriched the virus concentration in samples prior to the subsequent LAMP assay. This enrichment enabled not only to achieve more sensitive assay but also to shorten the assay time for all tested clinical samples by ∼10 min compared to the conventional LAMP. The shortened assay time suppresses the occurrence of nonspecific amplification by not providing the necessary incubation time, effectively suppressing misidentification by false positives. Utilizing this technique, we also developed a prototype of the POC NPP-LAMP kit. This kit offers a streamlined diagnostic process for nontrained individuals, from the sample enrichment, transfer of the enriched sample to LAMP assays, which facilitates on-site/on-demand diagnosis of SARS-CoV-2. This development holds the potential to contribute toward preventing not only the current outbreak but also future occurrences of pandemic viruses.

Development of a rapid detection method for the macrolide resistance gene in Mycobacterium avium using the amplification refractory mutation system-loop-mediated isothermal amplification method.

Macrolide antibiotics such as clarithromycin (CLR) and azithromycin are the key drugs used in multidrug therapy for Mycobacterium avium complex (MAC) diseases. For these antibacterial drugs, drug susceptibility has been correlated with clinical response in MAC diseases. We have previously demonstrated the correlation between drug susceptibility and mutations in the 23S rRNA gene, which confers resistance to macrolides. Herein, we developed a rapid detection method using the amplification refractory mutation system (ARMS)-loop-mediated isothermal amplification (LAMP) technique to identify mutations in the 23S rRNA gene of M. avium. We examined the applicability of the ARMS-LAMP method to genomic DNA extracted from six genotypes of M. avium clinical isolates. The M. avium isolates were classified into 21 CLR-resistant and 9 CLR-susceptible strains based on the results of drug susceptibility tests; the 23S rRNA genes of these strains were sequenced and analyzed using the ARMS-LAMP method. Sequence analysis revealed that the 9 CLR-sensitive strains were wild-type strains, whereas the 21 CLR-resistant strains comprised 20 mutant-type strains and one wild-type strain. Using ARMS-LAMP, no amplification from genomic DNAs of the 10 wild-type strains was observed using the mutant-type mismatch primer sets (MTPSs); however, amplification from the 20 mutant-type strain DNAs was observed using the MTPSs. The rapid detection method developed by us integrates ARMS-LAMP with a real-time turbidimeter, which can help determine drug resistance in a few hours. In conclusion, ARMS-LAMP might be a new clinically beneficial technology for rapid detection of mutations.IMPORTANCEMultidrug therapy for pulmonary Mycobacterium avium complex disease is centered on the macrolide antibiotics clarithromycin and azithromycin, and resistance to macrolides is an important prognosticator for clinical aggravation. Therefore, it is important to develop a quick and easy method for detecting resistance to macrolides. Drug resistance is known to be correlated with mutations in macrolide resistance genes. We developed a rapid detection method using amplification refractory mutation system (ARMS)-loop-mediated isothermal amplification (LAMP) to identify a mutation in the 23S rRNA gene, which is a macrolide resistance gene. Furthermore, we examined the applicability of this method using M. avium clinical isolates. The rapid method developed by us for detection of the macrolide resistance gene by integrating ARMS-LAMP and a real-time turbidimeter can help in detection of drug resistance within a few hours. Since this method does not require expensive equipment or special techniques and shows high analytical speed, it would be very useful in clinical practice.

Different forms of loop-mediated isothermal amplification (LAMP) for the detection of human viruses

Infections caused by viruses in humans can result in serious illnesses and even death. This means that early detection and diagnosis is extremely important for the control of these diseases. Currently, the loop-mediated isothermal amplification (LAMP) is regarded as a reliable method because as well as being cost-effective, simple and innovative, it allows nucleic acids to be amplified without the need for a large laboratory management structure. Thus, LAMP assay can be viewed as a highly efficient molecular-based advanced detection technique for several pathogens, including viruses. Systems based on LAMP have the following features: isothermal amplification, reproducibility and robustness, and they can be used when there is scarce or low quality genetic material. The amplification involves making use of, a maximum set of three specifically- designed primers and a DNA polymerase with strand-shifting activity. In most cases, this technique is far superior to other molecular techniques such as, for example, the conventional polymerase chain reaction (PCR) and its variants. The main advantage of the LAMP method is its cost-effectiveness, as it can be employed by means of a thermocycler, water bath or thermoblock. In this mini-review, information is provided about some of the main variants of the LAMP technique which have been designed for the diagnosis of several human viral pathogens.

Rapid detection of Japanese eel endothelial cell-infecting virus (JEECV) and Anguillid herpesvirus (AngHV-1) in Japanese eel (Anguilla japonica) using a qLAMP assay

Two DNA viruses, Japanese eel endothelial cell-infecting virus (JEECV) and Anguillid herpesvirus 1 (AngHV-1), cause serious diseases in eels that can negatively affect the economy of eel aquaculture industries in South Korea. Efficient virus detection is crucial for disease management; however, the practical application of current methodologies is challenging, in part owing to extensive time and specialized equipment requirements. The aim of this study was to develop a rapid real-time quantitative loop-mediated isothermal amplification (qLAMP) technique for the detection of JEECV and AngHV-1. Six different primers were designed to target eight different regions of the large T-antigen gene for JEECV detection, and the DNA polymerase catalytic subunit gene for AngHV-1 detection. Both sets of primers worked optimally at 65 °C. The qLAMP assay exhibited a minimum detection limit of 2.39 × 104 copies/μL for JEECV and 2.37 × 104 copies/μL for AngHV-1. Moreover, the primers demonstrated excellent specificity, showing no reaction with two major viruses, namely ostreid herpesvirus-1 microvariant (OsHV-1 μvar) and red sea bream iridovirus (RSIV). In addition, JEECV primers did not react with AngHV-1, and vice versa. Based on the standard curve and coefficient of determination values, both viruses could be quantified using this method. The qLAMP assay was validated with 104 clinical samples, including 72 infected and 32 healthy eels, and the assay findings were compared with previously reported duplex qPCR results that reported high sensitivity and specificity. The qLAMP results concorded well with the previous results. Evaluation of the threshold time (Tt) of the qLAMP results revealed that the samples could be analyzed in less than 15 min. The clinical diagnostic sensitivity (dSe) and diagnostic specificity (dSp) were assessed based on the confusion matrix; dSe and dSp for JEECV were 100% and 94.1%, respectively, and dSe and dSp for AngHV-1 were 96.8% and 77.8%, respectively. The Kappa values, which were used to represent the level of agreement between qLAMP and duplex qPCR results, for JEECV and AngHV-1 were 0.956 and 0.755, respectively, indicating that the qLAMP assay is a promising detection method for those viruses. Thus, the qLAMP assay developed herein could be applied as a rapid and sensitive tool to diagnose diseases caused by JEECV and AngHV-1 in the eel aquaculture industry.

Head-to-head comparison of two loop-mediated isothermal amplification (LAMP) kits for diagnosis of malaria in a non-endemic setting

BackgroundLight microscopy and rapid diagnostic tests (RDT) have long been the recommended diagnostic methods for malaria. However, in recent years, loop-mediated isothermal amplification (LAMP) techniques have been shown to offer superior performance, in particular concerning low-grade parasitaemia, by delivering higher sensitivity and specificity with low laboratory capacity requirements in little more than an hour. In this study, the diagnostic performance of two LAMP kits were assessed head-to-head, compared to highly sensitive quantitative real time PCR (qPCR), in a non-endemic setting.MethodsIn this retrospective validation study two LAMP kits; Alethia® Illumigene Malaria kit and HumaTurb Loopamp™ Malaria Pan Detection (PDT) kit, were evaluated head-to-head for detection of Plasmodium-DNA in 133 biobanked blood samples from suspected malaria cases at the Clinical Microbiology Laboratory of Region Skåne, Sweden to determine their diagnostic performance compared to qPCR.ResultsOf the 133 samples tested, qPCR detected Plasmodium DNA in 41 samples (defined as true positives), and the two LAMP methods detected 41 and 37 of those, respectively. The results from the HumaTurb Loopamp™ Malaria PDT kit were in complete congruence with the qPCR, with a sensitivity of 100% (95% CI 91.40–100%) and specificity of 100% (95% CI 96.07–100%). The Alethia® Illumigene Malaria kit had a sensitivity of 90.24% (95% CI 76.87–97.28) and a specificity of 95.65% (95% CI 89.24–98.80) as compared to qPCR.ConclusionsThis head-to-head comparison showed higher performance indicators of the HumaTurb Loopamp™ Malaria PDT kit compared to the Alethia® illumigene Malaria kit for detection of malaria.

Evaluation of Loop-Mediated Isothermal Amplification (LAMP) in Urine Samples for the Diagnosis of Imported Schistosomiasis.

Migratory flows and international travel are triggering an increase in imported cases of schistosomiasis in non-endemic countries. The present study aims to evaluate the effectiveness of the LAMP technique on patients' urine samples for the diagnosis of imported schistosomiasis in a non-endemic area in comparison to a commercial immunochromatographic test and microscopic examination of feces and urine. A prospective observational study was conducted in sub-Saharan migrants attending the Tropical Medicine Unit, Almería, Spain. For schistosomiasis diagnosis, serum samples were tested using an immunochromatographic test (Schistosoma ICT IgG-IgM). Stool and urine samples were examined by microcopy. Urine samples were evaluated by combining three LAMP assays for the specific detection of Schistosoma mansoni, S. haematobium, and for the genus Schistosoma. To evaluate the diagnostic accuracy, a latent class analysis (LCA) was performed. In total, 115 patients were included (92.2% male; median age: 28.3 years). Of these, 21 patients (18.3%) were diagnosed with schistosomiasis confirmed by microscopy, with S. haematobium being the most frequent species identified (18/115; 15.7%). The Schistosoma ICT IgG-IgM test result was 100% positive and Schistosoma-LAMP was 61.9% positive, reaching as high as 72.2% for S. haematobium. The sensitivity and specificity estimated by LCA, respectively, were: 92% and 76% for Schistosoma ICT IgG-IgM, 68% and 44% for Schistosoma-LAMP, and 46% and 97% for microscopy. In conclusion, the Schistosoma-LAMP technique presented a higher sensitivity than microscopy for the diagnosis of imported urinary schistosomiasis, which could improve the diagnosis of active infection, both in referral centers and in centers with limited experience or scarce resources and infrastructure.

Estandarización de una prueba isotérmica como una nueva herramienta diagnóstica en México para la detección molecular de Chlamydia abortus en pequeños rumiantes

Ovine Enzootic Abortion (OEA) is caused by Chlamydia abortus and has recently been recognized as endemic in Mexico. Due to the impact of OEA on intensive lamb production, it is necessary to establish a sanitary control plan based on an efficient diagnosis. The loop-mediated isothermal amplification technique (LAMP) is a molecular test that can specifically identify C. abortus. The aim of this study was to standardize the LAMP technique for the specific detection of C. abortus from ovine vaginal exudate. Primers were identified and modified from an electronic database. The effective conditions of the technique were determined using synthetic DNA and positive biological samples by PCR as references. The assay detection limit was 1 × 10-5 of genetic material, equivalent to 8.5 copies. The standardized LAMP test is proposed as a novel molecular tool for the rapid and specific diagnosis of C. abortus infection from ovine vaginal exudate samples in Mexico.

Engineering of the LAMP-CRISPR/Cas12b platform for Chlamydia psittaci detection.

Introduction. Chlamydia psittaci (C. psittaci) is a zoonotic infection, that causes psittacosis (parrot fever) in humans, leading to severe clinical manifestations, including severe pneumonia, adult respiratory distress syndrome, and, in rare cases, death.Gap Statement. Rapid, sensitive and specific detection of C. psittaci facilitates timely diagnosis and treatment of patients.Aim. This study aimed to engineer the LAMP-CRISPR/Cas12b platform for C. psittaci detection.Methodology. The loop-mediated isothermal amplification (LAMP) technique and clustered regularly interspaced short palindromic repeats-CRISPR associated protein 12b (CRISPR-Cas12b) assay were combined to establish two-step and one-tube LAMP-CRISPR/Cas12b reaction systems, respectively, for rapidly detecting C. psittaci.Results. The two-step and one-tube LAMP-CRISPR/Cas12b assay could complete detection within 1 h. No cross-reactivity was observed from non-C. psittaci templates with specific LAMP amplification primers and single-guide RNA (sgRNA) targeting the highly conserved short fragment CPSIT_0429 gene of C. psittaci. The detection limits of the two-step and one-tube LAMP-CRISPR/Cas12b reaction were 102 aM and 103 aM, respectively. The results were consistent with qPCR for nucleic acid detection in 160 clinical samples, including 80 suspected C. psittaci samples, kept in the laboratory.Conclusions. The LAMP-CRISPR/Cas12b assay developed in this study provides a sensitive and specific method for rapidly detecting C. psittaci and offers technical support for its rapid diagnosis.

Development of loop-mediated isothermal amplification technique for LM canola T45, 73496, and MON88302 and its field application

Development of loop-mediated isothermal amplification technique for LM canola T45, 73496, and MON88302 and its field application

Rapid on-site detection of Leuconostoc citreum in commercially processed products using loop-mediated isothermal amplification(LAMP) technique

Leuconostoc citreum is widely utilized across numerous industries due to its beneficial properties. Thus, a detection method for this target species is essential to track the presence of L. citreum in commercial products. We developed a rapid, on-site L. citreum detection method using the loop-mediated isothermal amplification (LAMP) technique in this study. The designed LAMP primer set exhibited high specificity, only targeting the intended species among the 76 tested. Moreover, this assay demonstrated a sensitivity of 2 pg of target DNA. To evaluate the LAMP assay's applicability, we selected 20 varied types of processed products. The results confirmed these products' successful and precise detection of L. citreum within 35 min. Additionally, we used samples spiked with L. citreum to determine the detection limit, revealing L. citreum detection up to 102 or 103 CFU/mL. Thus, the LAMP assay developed herein is a specific, sensitive, precise, and rapid on-site detection method for L. citreum in various processed products.

A Loop-Mediated Isothermal Amplification Assay for the Identification of Botrytis fragariae in Strawberry.

Gray mold in strawberry is caused by multiple species of Botrytis, including Botrytis cinerea, B. pseudocinerea, B. fragariae, and B. mali. The species B. cinerea and B. fragariae are widespread in production regions of the eastern United States and Germany, and their distinction is important for disease management strategies. Currently, the only way to differentiate these species in field samples is by PCR, which is time consuming, labor intensive, and costly. In this study, a loop-mediated isothermal amplification (LAMP) technique was developed based on species-specific NEP2 gene nucleotide sequences. The designed primer set specifically amplified B. fragariae DNA and no other Botrytis spp. (B. cinerea, B. mali, and B. pseudocinerea) or plant pathogens. The LAMP assay was able to amplify fragments from DNA extracted from infected fruit using a rapid DNA extraction protocol, confirming its ability to detect low amounts of B. fragaria DNA from field-infected fruit. In addition, a blind test was performed to identify B. fragariae in 51 samples collected from strawberry fields in the eastern United States using the LAMP technique. The B. fragariae samples were identified with a reliability of 93.5% (29 of 32), and none of the B. cinerea, B. pseudocinerea, or B. mali samples included in the test were amplified in 10 min. Our results show that the LAMP technique is a specific and reliable method for the detection of B. fragariae from infected fruit tissue and can help to control this important disease in the field.

Development of the colorimetric loop-mediated isothermal amplification technique for rapid and sensitive detection of chrysanthemum stunt viroid in chrysanthemum

Development of the colorimetric loop-mediated isothermal amplification technique for rapid and sensitive detection of chrysanthemum stunt viroid in chrysanthemum

Comparison of loop-mediated isothermal amplification, multiplex PCR, and REP- PCR techniques for identification of carbapenem-resistant Acinetobacter baumannii clinical isolates

Background and Objectives: Acinetobacter baumannii, an opportunistic pathogen, is related to hospital-acquired infections and increased mortality. This study aimed to develop the loop-mediated isothermal amplification (LAMP) test for the fast-de- tecting of A. baumannii isolates as well as determining genetic relatedness for these isolates via the REP-PCR technique.&#x0D; Materials and Methods: LAMP primers and multiplex PCR primers were designed for recognizing A. baumannii isolates harboring the bla SHV-1 , bla PER-1 , bla , AMPC, qnr, and aac (6)-1 genes, were collected (October 2020 to February 2021) from Shahid Motahari Hospital, Tehran, Iran. Combination disc test (CDT) results were used to assess the phenotypic iden- tification of isolates from ESBL producers. The sensitivity of the LAMP method was evaluated using a range of serial dilu- tions of genomic DNA. Results were compared between the LAMP technique, and multiplex PCR. The genetic diversity of clinical isolates was determined by REP-PCR.&#x0D; Results: Among one hundred A. baumannii samples and based on the combined disc test, 56% of isolates were ESBL pro- ducers. The sensitivity of the LAMP technique for the identification of A. baumannii was 4.06 ng/μl whilst the multiplex PCR was (16.2 ng/μl). Regarding multiplex PCR, (68%) of the isolates were bla SHV-1 positive, (40%) bla , (85%) aac (6́)-1, AMPC (67%), bla TEM-1 (63%), and (15%) qnr respectively. While in LAMP, (69%) of isolates were bla positive, (86%) aac (6')-1, and (20%) qnr. The results of AMPC, bla TEM-1 , and bla PER-1 genes showed 100% compatibility between multiplex PCR and LAMP assays. The results of REP-PCR indicated there were 17 clones, clone A at 14% was the most prevalent of the isolates.&#x0D; Conclusion: Wherever equipment and financial constraints are crucial, the LAMP test offers a better and more potent detec- tion rate for the identification of A. baumannii isolates than multiplex PCR. Furthermore, the genetic diversity of A. bauman- nii in these clinical isolates showed frequent commonality of genotypes.

Detection of SARS-CoV-2 by Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP) Technique

Detection of SARS-CoV-2 by Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP) Technique

Rapid Visual Detection of High Nitrogen-Use Efficiency Gene OsGRF4 in Rice (Oryza sativa L.) Using Loop-Mediated Isothermal Amplification Method.

The GROWTH-REGULATING FACTOR4 (OsGRF4) allele is an important target for the development of new high nitrogen-use efficiency (NUE) rice lines that would require less fertilizers. Detection of OsGRF4 through PCR (polymerase chain reaction)-based assay is cumbersome and needs advanced laboratory skills and facilities. Hence, a method for conveniently and rapidly detecting OsGRF4 on-field is a key requirement for further research and applications. In this study, we employed cleaved amplified polymorphic sequences (CAPs) and loop-mediated isothermal amplification (LAMP) techniques to develop a convenient visual detection method for high NUE gene OsGRF4NM73 (OsGRF4 from the rice line NM73). The TC→AA mutation at 1187-1188 bp loci was selected as the target sequence for the OsGRF4NM73 allele. We further employed this method of identification in 10 rice varieties that carried the OsGRF4 gene and results revealed that one variety (NM73) carries the target OsGRF4NM73 allele, while other varieties did not possess the osgrf4 genotype. The optimal LAMP reaction using hydroxynaphthol blue (HNB), a chromogenic indicator, was carried out at 65 °C for 60 min, and the presence of OsGRF4NM73 allele was confirmed by color changes from violet to sky blue. The results of this study showed that the LAMP method can be conveniently and accurately used to detect the OsGRF4NM73 gene in rice.

Designing one-step reverse transcriptase loop-mediated isothermal amplification for serotype O foot-and-mouth disease virus detection during the 2022 outbreak in East Java, Indonesia.

Various methods can detect foot-and-mouth disease (FMD) in cows, but they necessitate resources, time, costs, laboratory facilities, and specific clinical specimen submission, often leading to FMD virus (FMDV) diagnosis delays. The 2022 FMD outbreak in East Java, Indonesia, highlighted the need for an easy, inexpensive, rapid, and accurate detection approach. This study aims to devise a one-step reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) technique and phylogenetic analysis to detect the serotype O FMDV outbreak in East Java. Swab samples were collected from the foot vesicles, nasal secretions, and saliva of five suspected FMDV-infected cows in East Java between June and July 2022. The RT-LAMP design used hydroxy naphthol blue dye or SYBR Green I dye, with confirmatory analysis through reverse transcriptase polymerase chain reaction (RT-PCR) targeting 249 base pairs. PCR products underwent purification, sequencing, and nucleotide alignment, followed by phylogenetic analysis. The RT-LAMP method using hydroxy naphthol blue dye displayed a positive reaction through a color shift from purple to blue in the tube. Naked-eye observation in standard light or ultraviolet (UV) light at 365 nm, with SYBR Green I stain, also revealed color change. Specifically, using SYBR Green I dye, UV light at 365 nm revealed a color shift from yellow to green, signifying a positive reaction. Nucleotide alignment revealed mutations and deletion at the 15th sequence in the JT-INDO-K3 isolate from the East Java FMDV outbreak. Despite differing branches, the phylogenetic tree placed it in the same cluster as serotype O FMDV from Malaysia and Mongolia. JT-INDO-K3 exhibited distinctions from Indonesian serotype O FMDV isolates and those documented in GenBank. Then, the RT-LAMP method used in this study has a detection limit 10 times higher latter than the conventional RT-PCR limit, without any cross-reactivity among strains.