Longitudinal Thermal Gradient Research Articles

Magnetoinduced spin Nernst effect in topological nodal-line semimetals

The spin Nernst effect (SNE) of a topological nodal-line semimetals (TNLSMs) nanowire in a four-terminal cross-bar device is studied. Based on the nonequilibrium Green’s function method combining with the tight-binding Hamiltonian, the spin Nernst coefficients Ns3z, Ns3x and Ns3y of the two thermal transport models (kz-y case and kx-y case) under a perpendicular magnetic field are obtained. The traditional SNE describes the transverse voltage and spin current caused by the longitudinal thermal gradient. The transverse spin current is generated by the spin–orbit interaction rather than the perpendicular magnetic field. Here we find that the spin Nernst coefficients are equal to zero at the zero-magnetic field, but have finite values for non-zero magnetic fields in TNLSMs. The spin Nernst coefficient is closely related to the strength of the magnetic field and temperature. With the increase of the magnetic field strength, the peak height of the spin Nernst coefficient increases. These results indicate that the SNE is induced by the perpendicular magnetic field in the present TNLSMs system, which can be considered as an anomalous spin Nernst phenomenon. In addition, we find that Ns3z displays a series of peaks when the transmission coefficient TLR jumps from one integer plateau to another, and the spin Nernst coefficient Ns3i (i=x,y,z) is an odd function of the Fermi energy EF with Ns3z/x/y(−EF)=−Ns3z/x/y(EF) in connection mode kz-y. For the kx-y connection mode, due to the presence of the mass term m opening the energy gap, a sudden jump of the transmission coefficient TLR in the vicinity of the energy gap edge causes a very larger peak for the spin Nernst coefficient Ns3z/x/y, and the symmetrical properties of the spin Nernst coefficient Ns3z/x/y are completely broken in the strong magnetic field. These results indicate that the spin Nernst coefficient in TNLSMs strongly depends on the thermal gradient direction and the transverse lead connection direction. The spin Nernst coefficient in TNLSMs has strongly spatial anisotropy, which can be used as the characterization of the experimental detection of TNLSMs.

Investigation of stress and deflection in absorber of parabolic trough solar collector for direct steam generation

The tubular absorber of a parabolic trough solar collector (PTSC) experiences deflection and thermal stress during the operation due to the adverse circumferential and longitudinal thermal gradient in the direct steam generation (DSG) process. This study presents the coupled three-dimensional thermal–structural analysis of the absorber tube by combining heat transfer and static structural analyses using ANSYS Fluent 2021R1 software. The receiver of the LS-3 solar collector unit with a length of 4.06 m is considered as a computational domain with mass flow rates of 0.4 kg/s and 0.6 kg/s, an operating pressure of 100 bar, and the direct normal irradiance (DNI) of 750 W/m2. The deformation and stress analyses have been performed for preheating, evaporation, and superheating stages of the DSG process at solar noon. Under the subjected boundary conditions, the circumferential thermal gradient at the middle of the absorber in preheating, evaporation, and superheating sections are 27 K, 13 K, and 31 K, respectively. The maximum and minimum deflections observed in the absorber tube are 17.6 mm and 7.6 mm, respectively. The maximum and minimum normal stress along the axial direction on top of the absorber are 26.0 MPa and 12.6 MPa, respectively. It is observed that normal stresses along the axial direction is maximum at the mid of the absorber. The maximum thermal strains observed in preheating, evaporation, and superheating sections are 4.6 mm/m, 5.2 mm/m, and 5.6 mm/m, respectively.

Nernst effect in anisotropic four-terminal topological nodal-line semimetals

The Nernst effect is the transverse mode of thermoelectric transport, in which a longitudinal thermal gradient induces a transverse current in the conductor while under a perpendicular magnetic field. Here the Nernst effect in a mesoscopic topological nodal-line semimetals (TNLSMs) system of four-terminal cross-bar with the spin–orbit coupling under a perpendicular magnetic field is studied. The Nernst coefficient N c in two non-equivalen connection modes (k z –y mode and k x –y mode) is calculated based on the tight-binding Hamiltonian combined with the nonequilibrium Green’s function method. When the magnetic field is absent with φ = 0.0, the Nernst coefficient is exactly regardless of the temperature. When the magnetic field is not zero, the Nernst coefficient exhibits a series of densely oscillating peaks. The height of peak strongly depends on the magnetic field, and the Nernst coefficient is an even function of the Fermi energy satisfying the symmetrical property . The Nernst coefficient is also closely related to the temperature . When the temperature is very low (or ), the Nernst coefficient depends linearly on temperature. In the presence of a strong magnetic field, the Nernst coefficient shows peaks when the Fermi energy crosses the Landau levels. Under the weak magnetic field, the influence of spin–orbit coupling in TNLSMs materials on Nernst effect is very obvious. In the presence of the mass term, the PT-symmetry of the system is destroyed, the nodal ring of TNLSMs is broken and an energy gap will be opened. The Nernst coefficient N c has a large value in the energy gap, which is very promising for the application of the transverse thermoelectric transport.

Nernst response, viscosity and mobile entropy in vortex liquids

In a liquid of superconducting vortices, a longitudinal thermal gradient generates a transverse electric field. This Nernst signal peaks at an intermediate temperature and magnetic field, presumably where the entropy difference between the vortex core and the superfluid environment is largest. There is a puzzling similarity of the amplitude of this peak across many different superconductors. This peak can be assimilated to a minimum in the viscosity to entropy density ratio of the vortex liquid. Expressed in units of , this minimum is one order of magnitude larger than what is seen in common liquids. Moreover, the entropy stocked in the vortex core is not identical to the entropy bound to a moving magnetic flux line. Due to a steady exchange of normal quasi-particles, entropy can leak from the vortex core. A slowly moving vortex will be peeled off its entropy within a distance of the order of a superconducting coherence length, provided that the ratio is sufficiently large.

High Throughput UHPLC-MS-Based Lipidomics Using Vacuum Jacketed Columns.

Reversed-phase UHPLC-MS is extensively employed for both the profiling of biological fluids and tissues to characterize lipid dysregulation in disease and toxicological studies. With conventional LC-MS systems the chromatographic performance and throughput are limited due to dispersion from the fluidic connections as well as radial and longitudinal thermal gradients in the LC column. In this study vacuum jacketed columns (VJC), positioned at the source of the mass spectrometer, were applied to the lipidomic analysis of plasma extracts. Compared to conventional UHPLC, the VJC-based methods offered greater resolution, faster analysis, and improved peak intensity. For a 5 min VJC analysis, the peak capacity increased by 66%, peak tailing reduced by up to 34%, and the number of lipids detected increased by 30% compared to conventional UHPLC. The narrower peaks, and thus increased resolution, compared to the conventional system resulted in a 2-fold increase in peak intensity as well a significant improvement in MS and MS/MS spectral quality resulting in a 22% increase in the number of lipids identified. When applied to mouse plasma samples, reproducibility of the lipid intensities in the pooled QC ranged from 1.8-12%, with no related drift in tR observed.

Responses of fish communities to longitudinal thermal gradients in coldwater, lake outflow streams

Responses of fish communities to longitudinal thermal gradients in coldwater, lake outflow streams

Local thermal adaptation and limited gene flow constrain future climate responses of a marine ecosystem engineer.

Rising ocean temperatures and extreme temperature events have precipitated declines and local extinctions in many marine species globally, but patterns of loss are often uneven across species ranges for reasons that are poorly understood. Knowledge of the extent of local adaptation and gene flow may explain such patterns and help predict future trajectories under scenarios of climate change. We test the extent to which local differentiation in thermal tolerance is influenced by gene flow and local adaptation using a widely distributed intertidal seaweed (Hormosira banksii) from temperate Australia. Population surveys across ~2,000 km of the species range revealed strong genetic structuring at regional and local scales (global F ST = 0.243) reflecting extremely limited gene flow, while common garden experiments (14‐day exposures to 15, 18, 21°C) revealed strong site differences in early development and mortality in response to elevated temperature. Embryos from many sites spanning a longitudinal thermal gradient showed suppressed development and increased mortality to elevated water temperatures, but populations originating from warmer and more variable thermal environments tended to be less susceptible to warming. Notably, there was significant local‐scale variation in the thermal responses of embryos within regions which was corroborated by the finding of small‐scale genetic differences. We expect the observed genetic and phenotypic differentiation to lead to uneven responses to warming sea surface temperatures in this important marine foundation species. The study highlights the challenges of predicting species responses to thermal stress and the importance of management strategies that incorporate evolutionary potential for “climate‐proofing” marine ecosystems.

Laser cooling of Yb3+:KYW.

We report the first observation of laser cooling in Yb3+:KYW and validate the results by comparison with experiments in the well-studied material Yb3+:YAG. Radiation from a single-mode Ti:Al2O3 laser was used to achieve cooling of 1.5 K/W in 1% Yb:KYW at 1025 nm, comparing well with the reference material 3% Yb:YAG which cooled by 3.5 K/W at 1030 nm under open lab conditions. Experimental results for KYW crystals mounted on aerogels and doped with 1-20% Yb were in excellent agreement with the theoretical dependence of cooling power on the Yb absorption spectrum. Elimination of thermal conduction through the sample support structure was found to permit the attainment of lower temperatures and to simplify modeling of radiation balance conditions in self-cooled lasers with longitudinal thermal gradients. Contrary to the notion that more coolant ions yield higher cooling power, concentrations of Yb over 1% caused re-absorption of luminescence in KYW crystals, leading to a progressive red shift in the optimal cooling wavelength and the prevention of laser cooling altogether in a 20% sample at room temperature. The prospect of attaining radiation-balanced lasing in commercially-available tungstate crystals is evaluated.

Numerical Investigation of Pipelines Modeling in Small-Scale Concentrated Solar Combined Heat and Power Plants

In this paper four different detailed models of pipelines are proposed and compared to assess the thermal losses in small-scale concentrated solar combined heat and power plants. Indeed, previous numerical analyses carried out by some of the authors have revealed the high impact of pipelines on the performance of these plants because of their thermal inertia. Hence, in this work the proposed models are firstly compared to each other for varying temperature increase and mass flow rate. Such comparison shows that the one-dimensional (1D) longitudinal model is in good agreement with the results of the more detailed two-dimensional (2D) model at any temperature gradient for heat transfer fluid velocities higher than 0.1 m/s whilst the lumped model agrees only at velocities higher than 1 m/s. Then, the 1D longitudinal model is implemented in a quasi-steady-state Simulink model of an innovative microscale concentrated solar combined heat and power plant and its performances evaluated. Compared to the results obtained using the Simscape library model of the tube, the performances of the plant show appreciable discrepancies during the winter season. Indeed, whenever the longitudinal thermal gradient of the fluid inside the pipeline is high (as at part-load conditions in winter season), the lumped model becomes inaccurate with more than 20% of deviation of the thermal losses and 30% of the organic Rankine cycle (ORC) electric energy output with respect to the 1D longitudinal model. Therefore, the analysis proves that an hybrid model able to switch from a 1D longitudinal model to a zero-dimensional (0D) model with delay based on the fluid flow rate is recommended to obtain results accurate enough whilst limiting the computational efforts.

Input impedance measurement of a narrow pipe with thermal gradient.

Input impedance measurement is commonly used in the design of internal combustion engines to improve their performance. The water-cooled charge-air cooler used in supercharged engines imposes a strong longitudinal thermal gradient on the air contained in its narrow channels. To isolate the resonances caused by the thermal gradient, the input impedance of a semi-infinite narrow pipe with multiple longitudinal temperature profiles is studied experimentally using the Two-Measurement Three-Calibration method. Three known non-resonant loads are used to calibrate the test bench. The importance of using a semi-infinite pipe as a calibration load in narrow pipes is further demonstrated. In the case of this paper, the acoustic propagation is highly influenced by the presence of microphones. The calibration process helps to take into account this influence. Measurements show that the presence of a non-uniform longitudinal temperature profile in the air inside a pipe modifies its input impedance.

Anomalous spin Nernst effect in Weyl semimetals

The spin Nernst effect describes a transverse spin current induced by the longitudinal thermal gradient in a system with the spin–orbit coupling. Here we study the spin Nernst effect in a mesoscopic four-terminal cross-bar Weyl semimetal device under a perpendicular magnetic field. Because the spin current is a tensor, it has three elements with the spin direction pointing to the x, y and z directions when the spin current flows along the transverse lead. By using the tight-binding Hamiltonian combined with the nonequilibrium Green’s function method, the three elements of the spin current in the transverse leads and the spin Nernst coefficients are obtained. The results show that the spin Nernst effect in the Weyl semimetal has an essential difference to the traditional Nernst effect: we found that the z direction spin current is zero without the magnetic field while it appears under the magnetic field, and the x and y direction spin currents in the two transverse leads flow out or in together, in contrast to the traditional spin Nernst effect, in which the spin current is induced by the spin–orbit coupling and flows out from one lead and flows in on the other. We call it the anomalous spin Nernst effect. In addition, we show that the Weyl semimetals have inversion-type symmetry, mirror-reversal-type symmetry and electron–hole-type symmetry, which lead to the spin Nernst coefficients being either odd or even functions of the Fermi energy, the magnetic field and the transverse terminals. Moreover, the spin Nernst effect in the Weyl semimetals are strongly anisotropic and its coefficients are strongly dependent on both the direction of thermal gradient and the direction of the transverse lead connection. Three non-equivalent connection modes (x-z, z-x and x-y modes) are studied in detail, and the spin Nernst coefficients for three different modes exhibit very different behaviors. These strongly anisotropic behaviors of the spin Nernst effect can be used as the characterization of magnetic Weyl semimetals.

Dynamics of a type IV conformable pressure vessel for natural gas passenger vehicles

In this study we report on the fast fill dynamics of a conformable 3.52 L (water volume) prototype Type IV compressed natural gas (CNG) tank with an aspect ratio of 52; aspect ratio being defined here as the ratio of tank length to tank diameter. Non-conformable CNG tanks with aspect ratios less than 3 typically do not develop significant longitudinal thermal gradients during fast filling because pressure work heated gas is efficiently recirculated with inflows of gas cooled by the Joule-Thomson effect. However, this study found that the poor recirculation of gas within the prototype conformable tank during an 18.2s refill resulted in the development of a 23.9 °C m−1 longitudinal thermal gradient and a 125.6 °C developed gas temperature at the rear of the tank; double what was expected. Data was collected during several refills ranging from 11.3s to 140.6s in length. This study is the first to report on the fast fill dynamics of a conformable Type IV CNG tank and the data presented here informs the engineering and design of conformable gaseous fuel storage systems.

What causes cooling water temperature gradients in a forested stream reach?

Abstract. Previous studies have suggested that shading by riparian vegetation may reduce maximum water temperatures and provide refugia for temperature-sensitive aquatic organisms. Longitudinal cooling gradients have been observed during the daytime for stream reaches shaded by coniferous trees downstream of clear cuts or deciduous woodland downstream of open moorland. However, little is known about the energy exchange processes that drive such gradients, especially in semi-natural woodland contexts without confounding cool groundwater inflows. To address this gap, this study quantified and modelled variability in stream temperature and heat fluxes along an upland reach of the Girnock Burn (a tributary of the Aberdeenshire Dee, Scotland) where riparian land use transitions from open moorland to semi-natural, predominantly deciduous woodland. Observations were made along a 1050 m reach using a spatially distributed network of 10 water temperature data loggers, 3 automatic weather stations and 211 hemispherical photographs that were used to estimate incoming solar radiation. These data parameterised a high-resolution energy flux model incorporating flow routing, which predicted spatio-temporal variability in stream temperature. Variability in stream temperature was controlled largely by energy fluxes at the water-column–atmosphere interface. Net energy gains occurred along the reach, predominantly during daylight hours, and heat exchange across the bed–water-column interface accounted for <1% of the net energy budget. For periods when daytime net radiation gains were high (under clear skies), differences between water temperature observations increased in the streamwise direction; a maximum instantaneous difference of 2.5 °C was observed between the upstream reach boundary and 1050 m downstream. Furthermore, daily maximum water temperature at 1050 m downstream was ≤1 °C cooler than at the upstream reach boundary and lagged by >1 h. Temperature gradients were not generated by cooling of stream water but rather by a combination of reduced rates of heating in the woodland reach and advection of cooler (overnight and early morning) water from the upstream moorland catchment. Longitudinal thermal gradients were indistinct at night and on days when net radiation gains were low (under overcast skies), thus when changes in net energy gains or losses did not vary significantly in space and time, and heat advected into the reach was reasonably consistent. The findings of the study and the modelling approach employed are useful tools for assessing optimal planting strategies for mitigating against ecologically damaging stream temperature maxima.

Investigation of the effects of thermal gradients present in Gleeble high-temperature tensile tests on the strain state for free cutting steel

A common feature of uniaxial high-temperature tension tests, and to a certain extent compression tests, performed using a Gleeble thermomechanical testing system that employs direct resistance heating for the characterisation of the rheological behaviour of materials is longitudinal and radial thermal gradients. The aim of this article is to experimentally quantify the axial thermal gradients for a given tensile specimen geometry of free cutting steel during heating and deformation, and design a modelling methodology to simulate their influence on the strain distribution as compared to the assumption of isothermal heating and deformation. For this purpose, a feedback algorithm was developed to control the electric current input in a similar manner to that applied by the Gleeble testing system, which implemented via the UAMP user subroutine in ABAQUS for use in electro-thermal simulations of the direct resistance Joule heating used by the Gleeble testing system. The predicted temperature fields were compared with the temperature distributions recorded experimentally along the gauge section of the tensile specimens. Finite element simulations of Gleeble tensile tests were carried out under isothermal conditions and using the temperature distributions calculated by the feedback algorithm for a range of strain rates and temperatures in order to evaluate the difference in predicted stress state. The results show that an isothermal assumption should only be used conservatively in finite element simulation of the Gleeble thermomechanical test employing direct resistance heating to avoid significant errors.

Orographic Effects of the Tibetan Plateau on the East Asian Summer Monsoon: An Energetic Perspective

AbstractThis paper investigates the dynamical processes through which the Tibetan Plateau (TP) influences the East Asian summer monsoon (EASM) within the framework of the moist static energy (MSE) budget, using both observations and atmospheric general circulation model (AGCM) simulations. The focus is on the most prominent feature of the EASM, the so-called meiyu–baiu (MB), which is characterized by a well-defined, southwest–northeast elongated quasi-stationary rainfall band, spanning from eastern China to Japan and into the northwestern Pacific Ocean between mid-June and mid-July.Observational analyses of the MSE budget of the MB front indicate that horizontal advection of moist enthalpy, and primarily of dry enthalpy, sustains the front in a region of otherwise negative net energy input into the atmospheric column. A decomposition of the horizontal dry enthalpy advection into mean, transient, and stationary eddy fluxes identifies the longitudinal thermal gradient due to zonal asymmetries and the meridional stationary eddy velocity as the most influential factors determining the pattern of horizontal moist enthalpy advection. Numerical simulations in which the TP is either retained or removed show that the TP influences the stationary enthalpy flux, and hence the MB front, primarily by changing the meridional stationary eddy velocity, with reinforced southerly wind over the MB region and northerly wind to its north. Changes in the longitudinal thermal gradient are mainly confined to the near downstream of the TP, with the resulting changes in zonal warm air advection having a lesser impact on the rainfall in the extended MB region.

Isothermal and temperature gradient supercritical fluid extraction and fractionation of squalene from palm fatty acid distillate using compressed carbon dioxide

Currently the extraction of valuable components from oils is of growing interest. Palm fatty acid distillate (PFAD) is a by-product from palm oil refining process which contains valuable minor components. This work investigated the extraction and recovery of squalene using supercritical carbon dioxide (Sc-CO 2) as solvent from PFAD. The process has been carried out on a counter-current glass beads packed column with the dimensions of 11.45 mm internal diameter (I.D.) and 1.5 m of effective height. The effect of the experiment conditions on the squalene purity and recovery has been studied. The pressure and temperature were the operating conditions investigated and they varied from 10 to 20 MPa and 313 to 353 K, respectively. Squalene and free fatty acids (FFA) content in the extract increased, and triglycerides content decreased during most of the fractionation runs. Longitudinal thermal gradient profiles along the column was investigated for further recovery of squalene from PFAD, results showed the highest squalene recovery of more than 95% was reached and concentration of squalene was increased from 2 wt% in the feed to 16 wt% in the top product.

Comment on “Signatures of Surface States in Bismuth at High Magnetic Fields”

Nernst effect is the transverse electric field due to a longitudinal thermal gradient in presence of magnetic field. Its magnitude was recently studied up to 33 T in a bismuth single crystal with a magnetic field oriented along the trigonal axis . In addition to quantum oscillations of the Nernst response, a rich structure with several additional peaks was also detected when the magnetic field exceeded the quantum limit, which is of the order of 10 T in this configuration. The origin of these high-field Nernst anomalies is a subject of ongoing research. Very recently, Seradjeh, Wu, and Phillips have suggested that a surface state can give rise to these anomalies. This proposal does not resist a critical examination.

Nernst effect and dimensionality in the quantum limit

Nernst effect, the transverse voltage generated by a longitudinal thermal gradient in presence of magnetic field has recently emerged as a very sensitive, yet poorly understood, probe of electron organization in solids. Here we report on an experiment on graphite, a macroscopic stack of graphene layers, which establishes a fundamental link between dimensionality of an electronic system and its Nernst response. In sharp contrast with single-layer graphene, the Nernst signal sharply peaks whenever a Landau level meets the Fermi level. This points to the degrees of freedom provided by finite interlayer coupling as a source of enhanced thermoelectric response in the vicinity of the quantum limit. Since Landau quantization slices a three-dimensional Fermi surface, each intersection of a Landau level with the Fermi level modifies the Fermi surface topology. According to our results, the most prominent signature of such a topological phase transition emerges in the transverse thermoelectric response.

Spin Nernst effect and Nernst effect in two-dimensional electron systems

We study the Nernst effect and the spin Nernst effect and show that a longitudinal thermal gradient induces a transverse voltage and a spin current. A mesoscopic four-terminal cross-bar device having the Rashba spin-orbit interaction (SOI) under a perpendicular magnetic field is considered. For zero SOI, the Nernst coefficient peaks when the Fermi level crosses the Landau levels. In the presence of the SOI, the Nernst peaks split and the spin Nernst effect appears and exhibits a series of oscillatory structures. The larger the SOI or the weaker the magnetic field is, the more pronounced the spin Nernst effect is. The results also show that the Nernst and spin Nernst coefficients are sensitive to the detailed characteristics of the sample and the contacts. In addition, the Nernst effect is found to survive in strong disorder better than the spin Nernst effect.

Natural Convection in a Tilted Rectangular Slot Containing Non-Newtonian Power-Law Fluids and Subject to a Longitudinal Thermal Gradient

A two-dimensional study of natural convection, in a tilted rectangular slot filled with non-Newtonian power-law fluids and subjected to uniform heat flux along its short side walls, is carried out numerically by solving the full governing equations. In the limit of a thin layer, these equations are considerably reduced by using the parallel flow approximation. Solutions for the flow and temperature fields, and the heat transfer rate, are obtained as functions of the governing parameters. Good agreement is found between the results of two approaches for a wide range of these governing parameters.