Long-term Stability Research Articles

Constructing sulfur-rich interphase to promote the cycle stability of graphite/LiNi0.8Co0.1Mn0.1O2 pouch battery at elevated temperature

Lithium-ion batteries (LIBs) with LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes have a high energy density, but their long-cycle performance, especially at high temperature, should still be improved due to the instability of the NCM811 cathode-electrolyte interphase. In this work, 2, 2, 2-Trifluoroethyl p-Toluenesulfonate (TPTS) is introduced as a functional film-forming electrolyte additive design to improve the long-term stability of graphite/NCM811 batteries. The preferential redox reactions of TPTS molecules play a pivotal role in fostering the creation of a sulfur-riched interphase, characterized by low impedance. This interphase works to fortify the interfacial structure, effectively inhibiting the dissolution of transition metal ions. Therefore, in comparison to the graphite/NCM811 pouch batteries lacking additive, TPTS enhance the long-cycle capacity retention from 47 % to 80 % after 450 cycles at 45 °C. What's more, TPTS suppresses outgassing and demonstrates enhanced capacity maintenance for the battery even after storage at 60 °C. This work not only demonstrates the stabilizing impacts of TPTS on the electrode-electrolyte interphase and its enhancement of cycling performance at elevated temperatures but also introduces a novel approach for the practical utilization of functional electrolytes matching high-nickel LIBs.

Anodic oxidation- and hydrogenation-produced TiO2 nanotubes on titanium and its effect on gingival epithelial cell adhesion ability

The gingival epithelium plays a crucial role in achieving long-term stability of dental implants, and the hydrogenated TiO2 nanotubes with a superhydrophilic surface exhibit more excellent biological activity than pure titanium implants. However, the effects of the hydrogenated TiO2 nanotubes on human gingival epithelial cells remain unclear. Here, we fabricated hydrogenated TiO2 nanotubes using anodization and hydrogenation to investigate the adhesion of human gingival epithelial cells (HGEs) on structured surfaces in vitro. The topography, roughness, and wettability of three sample types—titanium (Ti), TiO2 nanotubes (TNTs), and hydrogenated TiO2 nanotubes (H2-TNTs)—were characterized. To evaluate cell adhesion, the HGEs were co-cultured with these specimens. This allowed for the examination of both the adhesion morphology and the number of cells adhering to each material’s surface. Expression levels of genes and proteins related to cell adhesion were also assessed. H2-TNTs demonstrated nanoscale topography similar to TNTs in terms of diameter and height and maintained a superhydrophilic surface (with a static water contact angle of < 5°). The number of HGEs adhering to H2-TNTs was notably higher. Furthermore, HGEs on H2-TNTs displayed a more stretched morphology in comparison to the other two groups. Notably, the expression levels of adhesion-related genes and proteins in H2-TNTs surpassed those of the other two groups. Hence superhydrophilic H2-TNTs significantly enhance the adhesion ability of HGEs on the material surface.

Research on Corporate Financial Risk Management and Countermeasures

In today's new economic environment, competition among businesses is intensifying, leading to various challenges across industries. Financial risks, in particular, are receiving significant attention due to their potential impact. These risks can stem from market fluctuations, policy changes, or poor management, among other factors. Therefore, it's crucial for businesses to comprehensively consider and effectively manage these risks to ensure long-term stability and growth. Furthermore, controlling financial risks entails multiple measures. Businesses need to establish robust financial management systems, including clear financial goals, standardized financial processes, and well-defined internal control mechanisms. Additionally, they should enhance monitoring and analysis of market and industry dynamics to promptly identify and address potential risks. Moreover, by establishing reasonable financial budgets and funding plans and appropriately allocating financial resources, businesses can mitigate operational risks.

Ultrasmall Fe3O4 nanoparticles self-assembly induced dual-mode T1/T2-weighted magnetic resonance imaging and enhanced tumor synergetic theranostics

Individual theranostic agents with dual-mode MRI responses and therapeutic efficacy have attracted extensive interest due to the real-time monitor and high effective treatment, which endow the providential treatment and avoid the repeated medication with side effects. However, it is difficult to achieve the integrated strategy of MRI and therapeutic drug due to complicated synthesis route, low efficiency and potential biosafety issues. In this study, novel self-assembled ultrasmall Fe3O4 nanoclusters were developed for tumor-targeted dual-mode T1/T2-weighted magnetic resonance imaging (MRI) guided synergetic chemodynamic therapy (CDT) and chemotherapy. The self-assembled ultrasmall Fe3O4 nanoclusters synthesized by facilely modifying ultrasmall Fe3O4 nanoparticles with 2,3-dimercaptosuccinic acid (DMSA) molecule possess long-term stability and mass production ability. The proposed ultrasmall Fe3O4 nanoclusters shows excellent dual-mode T1 and T2 MRI capacities as well as favorable CDT ability due to the appropriate size effect and the abundant Fe ion on the surface of ultrasmall Fe3O4 nanoclusters. After conjugation with the tumor targeting ligand Arg-Gly-Asp (RGD) and chemotherapy drug doxorubicin (Dox), the functionalized Fe3O4 nanoclusters achieve enhanced tumor accumulation and retention effects and synergetic CDT and chemotherapy function, which serve as a powerful integrated theranostic platform for cancer treatment.

Porphyrin Aluminum Metal-Organic Framework in Liquid Water, its Interaction with the Oxidized Organosulfur Compound Diethyl Sulfoxide, and its Sorption from Aqueous Solution.

Oxidized organosulfur compounds and, in particular, sulfoxides are of interest as solvents in the semiconductor and pharmaceutical industry, environmental contaminants, and simulants in deactivation of chemical warfare agents. An experimental study is reported of the interaction of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (Compound 2) with diethyl sulfoxide (DESO) in pure form and in aqueous solution. First, the suitability of Compound 2 as sorbent in aqueous solution was assessed; namely, its long-term stability (up to 15 days) in liquid water has been investigated at room temperature and under stirring. Here, a novel facile spectroscopic method has been used, a periodic micro-sampling of sorbent from suspension, followed by vacuum mini-filtration and an ex situ time-dependent attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) analysis. Next, the interaction of Compound 2 with pure liquid DESO under ambient conditions was investigated, which yields the stoichiometric adsorption complex (Al-MOF-TCPPH2)1(DESO)2 denoted Compound 3. In this adsorption complex, molecules of DESO interact with the OH group and carboxylate group of the sorbent. Then, the removal of DESO from Compound 3 was assessed, using facile treatment with warm water in the micro Soxhlet apparatus followed by the ATR FT-IR analysis. Finally, Compound 2 was tested in sorption of DESO from diluted aqueous solution. In the initial step, the sorption proceeds very quickly (in <1 min the concentration of DESO decreases by about 20%) followed by a much slower step. The maximum amount of adsorbed DESO corresponds to half of the amount adsorbed from pure DESO as found by the high-performance liquid chromatography-ultraviolet detection method. This adsorbed amount corresponds to 1 mol DESO adsorbate per mol of sorbent. Porphyrin aluminum metal-organic framework Compound 2 is promising for the removal of DESO from diluted aqueous solution, and it is of interest for the removal of similar oxidized organosulfur compounds.

N-doped carbon nanotube arrays Encapsuled with cobalt‑nickel alloy as superior free-standing electrodes for ultrahigh-rate hydrogen peroxide production

Electrocatalytic oxygen reduction via the two-electron pathway (2e−-ORR) is an environmentally friendly and promising route for hydrogen peroxide (H2O2) production. Carbon-based catalysts with transition metal species have been widely investigated due to their high tunability. However, the H2O2 production performance of such catalysts is still far from the requirement of practical applications, owing to their contradiction between durability and ORR activity/selectivity. In this work, metal alloy is encapsulated within the free-standing N-doped carbon nanotube arrays, named NiCo-CNTs-x (x represents the duration of the cation substitution process in hours), to precisely regulate the activity and selectivity of nitrogen sites on the surface of the carbon layer, meanwhile hindering the dissolution of alloy inside the CNTs, thus realizing long-term stability and high-activity catalysis for 2e−-ORR. Therefore, the NiCo-CNTs-30 demonstrates high activity (onset potential around 0.7 V) and selectivity (greater than 85% within the range of 0–0.8 V), and delivers a high yield of 11.7 mg L−1 h−1 with no current decay or structural damage within 24 h, showcasing its exceptional long-term stability. The catalyst can also effectively degrade organic dyes, making it highly promising for industrial applications.

In-situ reaction modification of isocyanate derivatives with hole-transport units on perovskite film surface for efficient and stable solar cells

FAPbI3 perovskite solar cells (PSCs) have attracted widespread research attention. The interfacial properties play a crucial role in perovskite defect passivation and interfacial carrier transport, significantly influencing the power conversion efficiency (PCE) and stability of devices. Here, a novel interface modification strategy of in-situ reaction on perovskite surface is proposed. A molecule N,N′-bis(4-isocyanatophenyl)-N,N′-di-p-tolyl-[1,1′-biphenyl]-4,4′-diamine (TPD-NCO), involving a hole-transporting unit TPD was synthesized. The highly reactive isocyanate (NCO) groups addition-reacted with formamidine ions (FA+) from the FAPbI3 surface, forming urea with firm covalent bonds. The resulting stable modification smoothened the interface, and its urea groups coordinated with Pb2+ and formed hydrogen bonds with I-, thereby passivating the surface defects and inhibiting ion migration. Moreover, the hole-transporting units were firstly anchored through this covalent modification as a p-type dopant to lower the interface energy barrier for hole extraction. The PCE of target devices increased from 22.82% to 24.46%, which also remained 93% for 5460 h under high humidity (65% RH), 87% for 1060 h under 75 °C, and 77% for 420 h under maximum power point (MPP) operation at 50 °C, indicating both excellent efficiency and long-term stabilities. This work displays the value of both firm and hole-conductive features in in-situ reactive interface modification.

(Ca0.25La0.5Dy0.25)CrO3 Ceramic Fiber@Biomass-Derived Carbon Aerogel with Enhanced Solute Transport Channels for Highly Efficient Solar Interface Evaporation

The use of solar interface evaporation for seawater desalination or sewage treatment is an environmentally friendly and sustainable approach; however, achieving efficient solar energy utilization and ensuring the long-term stability of the evaporation devices are two major challenges for practical application. To address these issues, we developed a novel ceramic fiber@bioderived carbon composite aerogel with a continuous through-hole structure via electrospinning and freeze-casting methods. Specifically, an aerogel was prepared by incorporating perovskite oxide (Ca0.25La0.5Dy0.25)CrO3 ceramic fibers (CCFs) and amylopectin-derived carbon (ADC). The CCFs exhibited remarkable photothermal conversion efficiencies, and the ADC served as a connecting agent and imparted hydrophilicity to the aerogel due to its abundant oxygen-containing functional groups. After optimizing the composition and microstructure, the (Ca0.25La0.5Dy0.25)CrO3 ceramic fiber@biomass-derived carbon aerogel demonstrated remarkable properties, including efficient light absorption and rapid transport of water and solutes. Under 1 kW m−2 light intensity irradiation, this novel material exhibited a high temperature (48.3 °C), high evaporation rate (1.68 kg m−2 h−1), and impressive solar vapor conversion efficiency (91.6%). Moreover, it exhibited long-term stability in water evaporation even with highly concentrated salt solutions (25 wt%). Therefore, the (Ca0.25La0.5Dy0.25)CrO3 ceramic fiber@biomass-derived carbon aerogel holds great promise for various applications of solar interface evaporation.

Tailoring the microstructure of zwitterionic nanofiltration membranes via post-treatment for antibiotic desalination

Zwitterionic nanofiltration membranes, with high rejection to organic molecules while low rejection to monovalent salts, are promising for antibiotic desalination. However, due to the heterogeneous issue of interfacial polymerization, the residual amine groups result in polymer chain aggregation via hydrogen bonds, blocking the mass transfer of water and monovalent salts. Herein, EtOH-assisted Michael-addition/Schiff-base reaction strategy was proposed to solve the issue. NaOH was initially utilized to provisionally interrupt the hydrogen bonds between polymer chains. Meanwhile, with the assistance of EtOH, gallic acid diffused into the membrane and reacted with the amine groups on the polymer chains to form covalent bonds, which thoroughly destroyed the stacking of polymer chains. As a consequence, water permeance and antibiotic desalination efficiency of the membrane are improved. For example, the pure water permeance reaches 8.9 L m−2 h−1 bar−1, 1.7-fold enhancement compared with the pristine membrane. The membrane is applied for antibiotic desalination, offering long-term running stability, antifouling ability, as well as high efficiency in concentrated antibiotics.

Tuning the thermo-mechanical synergies effect of solid oxide fuel cells with negative thermal expansion NdMnO3 in La0.6Sr0.4Co0.2Fe0.8O3-δ-based symmetric electrode

Solid oxide fuel cells (SOFCs) are efficient and clean energy conversion devices, but one of the major challenges for their marketization is the instability of different component materials under high temperature operating conditions. The existence of a certain internal stress gradient between materials with different thermal expansion characteristics in the process of SOFCs from low temperature assembly to high temperature use is the main reason of this instability, leading to the inability of SOFCs to repeat start-stop and the rapid decay of long-term stability performance. To improve these problems, a creative concept of fuel cell interface overall regulation is proposed, simplifying the complex interface between different components of SOFCs into a unified and adjustable quasi-zero difference thermal expansion interface. The composite of high catalytic activity electrode material and high stability negative thermal expansion material is used for electrolyte support structure symmetrical cell, which makes the whole cell “sandwich” structure thermally and mechanically compatible. As a concept verification, the classic high catalytic performance electrode material La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF), Gd0.2Ce0.8O2-δ (GDC) and NdMnO3 (NM) negative thermal expansion material with high chemical stability and mechanical stability were composited in equal proportions to form LSCF@GDC&NM electrode as the symmetrical electrode. After equal proportion compositing, the thermal expansion curve of LSCF@GDC&NM material can highly coincide with the thermal expansion curve of GDC, making the single cell with LSCF@GDC&NM electrode can withstand 25 power thermal cycles without significant performance decay, achieving 442 mW cm−2 at 800 °C and maintaining stably for 140 h without any degradation. These results show that using negative thermal expansion material to regulate electrode strategy is expected to make a whole zero difference thermal fuel cell configuration.

The “Forgotten” Hydroxyapatite Crystals in Regenerative Bone Tissue Engineering: A Critical Review

Bone regeneration using Bone Morphogenetic Proteins (BMPs) alongside various engineered scaffolds has attracted considerable attention over the years. The field has seen extensive research in preclinical animal models, leading to the approval of two products and guiding the quest for new materials. Natural and synthetic polymers, ceramics, and composites have been used to fabricate the necessary porous 3D scaffolds and delivery systems for BMPs. Interestingly, all reported applications in the literature are triumphant. Evaluation of the results is typically based on histologic assessment after appropriate staining and radiological modalities, providing morphological identification of the newly formed bone and describing cells and the organic compound. Remarkably, while these evaluation methods illustrate mineralization, they are not capable of identifying hydroxyapatite crystals, the mineral component of the bone, which are crucial for its mechanical properties, structure, integrity, and long-term stability of regenerated bone tissue. This review aims to focus on the different scaffolds used in bone tissue engineering applications and underline the pressing need for techniques that could recognize the presence of hydroxyapatite crystals as well as their characteristics in bone tissue engineering, which will provide a more complete and comprehensive assessment of the successful results.

Experimental study of graphene-based nanofluid dispersions stability for efficient heat transmission within a concentric tube heat exchanger

This study undertook the experimental enhancement of dispersion stability in graphene-based nanofluids to boost the performance of concentric counterflow heat exchangers. Emphasis was placed on the characterization and preparation of graphene suspensions by evaluating their dispersion properties in various solvents: water, ethanol, acetone, and dimethylformamide (DMF). The graphene powder underwent comprehensive analysis using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy (FTIR). Subsequently, graphene suspensions were prepared and uniformly mixed using both a magnetic stirrer and an ultrasonic vibrator. The investigation confirmed that solvent type significantly influences the stability and solubility of the suspensions. Solutions of reduced graphene oxide (rGO) in water, ethanol, and DMF exhibited remarkable long-term stability, contrasting with those in acetone. Water emerged as the superior solvent for developing the thermal transport fluid. The addition of graphene resulted in a conductivity increase of approximately 48.15% at φ = 0.5% concentration, while the best thermal efficiency was attained at φ = 0.35% and a flow rate of 3 L/min. Furthermore, at lower flow rates, it is advisable to avoid higher concentrations to maintain optimal thermal efficiency.

Integrated Heterogeneous Engineering with the Vacancy Defect of Porous CoPv-MoxPv Nanosheets for an Accelerated Hydrogen Evolution Reaction.

Electrochemical water splitting is a possible way of realizing sustainable and clean hydrogen production but is challenging, because a highly active and durable electrocatalyst is essential. In this work, we integrated heterogeneous engineering and vacancy defect strategies to design and fabricate a heterostructure electrocatalyst (CoPv-MoxPv/CNT) with abundant phosphorus vacancies attached to carbon nanotubes (CNTs). The vacancy defects enabled the optimization of the electronic structure; thereby, the electron-rich low-valent metal sites enhanced the ability of nonmetallic P to capture proton H. Meanwhile, the heterogeneous interface between bimetallic phosphides and CNTs realized rapid electron transfer. In addition, the Co, Mo, and P active species in the electrocatalytic process exposed increased amounts of active sites featuring porous nanosheet structures, which facilitated the adsorption of reaction intermediates and thus enhanced the hydrogen evolution reaction performance. In particular, the optimized CoPv-MoxPv/CNT catalyst possesses an overpotential of 138 mV at a current density of 10 mA cm-2 and long-term stability for 24 h. This work offers insights and possibilities for the engineering and exploration of transition metal-based electrocatalysts through combining multiple synergistic strategies.

Strategies for Achieving Ultra-Long ORR Durability-Rh Activates Interatomic Interactions in Alloys.

The stability of platinum-based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh-doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh-Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt -1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long-term testing has shown direct inhibition of Co dissolution in Rh-Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long-term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm-2 for Rh-Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long-term stability of the alloy over the course of the cycle.

A Multi-Interface Structure of Graphdiyne/Cobalt Oxides for Chlorine Production.

A challenge facing the chlor-alkali process is the lack of electrocatalyst with high activity and selectivity for the efficient industrial production of chlorine. Herein the authors report a new electrocatalyst that can generate multi-interface structure by in situ growth of graphdiyne on the surface of cobalt oxides (GDY/Co3O4), which shows great potential in highly selective and efficient chlorine production. This result is due to the strong electron transfer and high density charge transport between GDY and Co3O4 and the interconversion of the mixed valence states of the Co atoms itself. These intrinsic characteristics efficiently enhance the conductivity of the catalyst, facilitate the reaction kinetics, and improve the overall catalytic selectivity and activity. Besides, the protective effect of the formed GDY layer is remarkable endowing the catalyst with excellent stability. The catalyst can selectively produce chlorine in low-concentration of NaCl aqueous solution at room temperature and pressure with the highest Faraday efficiency of 80.67% and an active chlorine yield rate of 184.40mg h-1 cm-2, as well as superior long-term stability.

Reduction of light shifts in a cold-atom CPT clock

Light shifts induced during atom–light interactions significantly affect the medium- and long-term frequency stability of atomic clocks. Here, we employ composite laser pulse sequences to mitigate interrogation-induced light shifts in a cold-atom coherent-population-trapping clock. We obtain the anti-symmetry error signal via modulating the local oscillator phase in the free-evolution time of Ramsey interferometry. Utilizing this signal, we employ two feedback loops to simultaneously eliminate light shifts and stabilize the clock frequency using the auto-balanced Ramsey (ABR) spectroscopy scheme. Our experimental results demonstrate that this approach can reduce the clock frequency’s sensitivity to variations in light shifts by implementing four Ramsey sub-sequences. Furthermore, we show that the ABR spectroscopy scheme enhances the long-term frequency stability of the atomic clock when the averaging time τ > 5000 s.

Mode-locked large-mode-area Er/Yb-doped fiber oscillator via nonlinear polarization evolution with enhanced mode suppression

We report a mode-locked Er/Yb-doped large-mode-area (LMA) fiber oscillator based on nonlinear polarization evolution (NPE), which utilizes a linear cavity primarily composed of polarization-maintaining (PM) fibers. The oscillator operates at 1.56 µm with a fundamental repetition rate of 34.47 MHz and has two output ports. One port can deliver high-quality soliton-like pulses with a pulse duration of 325 fs and an average power of 39.5 mW (corresponding to a pulse energy of 1.15 nJ). In contrast, the other port not only generates lower-quality complex pulses but also exhibits poorer short-term and long-term stability, likely due to cross-phase modulation effects. To the best of our knowledge, this is the first implementation of the NPE mode-locked technology in a PM-LMA Er/Yb-doped fiber oscillator at 1.55 µm which often suffers from poor self-starting mode-locking capabilities. This achievement is primarily attributed to the use of endlessly single-mode photonic crystal fibers, which effectively suppress higher-order modes in PM-LMA fibers.

Physicochemical and thermal characterization of the edible shellac films incorporated with oleic acid to enhance flexibility, water barrier and retard aging

In this work, shellac plasticized with oleic acid was solvent cast to prepare the flexible and water-resistant film for packaging applications. The films were prepared with varying amounts of oleic acid and studied in detail for appearance, surface morphology, thermal, chemical, barrier, mechanical, and robustness. The surface morphology confirmed the smooth surface of films up to SH-OA20 (100:20 w/w; shellac: oleic acid). Fourier-transform infrared spectroscopy confirmed that oleic acid reduced the hydrogen bonding of the shellac matrix to provide a plasticization effect. Also, the thermal analysis showed a reduction in the melting enthalpy. Moreover, the plasticized films had a better barrier to water vapor due to increased smoothness and reduction in brittleness. Adding oleic acid also increased the elongation at break up to 40 % without any changes in tensile strength. The flexibility of the films increased with the oleic acid content, making them resistant to burst, crumbling, bending, rolling, and stretching. Oleic acid also showed the retardation of aging and thermal aging of shellac. In the future, the long-term stability and migration of the films can be investigated.

Preservation and reactivation strategies for quorum quenching media to combat membrane biofouling

Microbial quorum quenching (QQ), which addresses biofouling resistant to physical and chemical methods, presents a compelling solution. Enhancements in sustainability are imperative to ensure its long-term stability. This study explores QQ media preservation for extended use. Three media types were tested over 150 days: fresh BH4 cells, preserved/reactivated BH4 cells, and BH4 cell extracts. Initial QQ activities ranged in the appropriate levels from 1.08 to 1.24 h−1. Preservation in 50 mM Tris-HCl at 4 °C showed that media with whole cells retained approximately 60 % activity after 60 days, unlike cell extract media, which lost all activity. However, the dehydration and reactivation of BH4 cell media fully recovered the initial QQ activity while maintaining it for 150 days. In MBR tests, reactivated QQ media performed as effectively as those prepared with freshly cultured BH4 cells, delaying membrane fouling by 2-fold. Revitalizing QQ media in combination with chlorine-based chemically enhanced backwashing (CEB) further delayed fouling by 2.5 times compared to CEB alone. Reactivated QQ media retained robust activity even after prolonged MBR use. This study showcases the effectiveness of dehydration and reactivation techniques for preserving QQ media, ensuring its reliable long-term storage and utilization. However, further enhancements are necessary to optimize cell viability.

Long-term stability and immunogenicity of lipid nanoparticle COVID-19 mRNA vaccine is affected by particle size

ABSTRACT Messenger ribonucleic acid (mRNA) technology has been rapidly applied for the development of the COVID-19 vaccine. However, naked mRNA itself is inherently unstable. Lipid nanoparticles (LNPs) protect mRNAs from extracellular ribonucleases and facilitate mRNA trafficking. For mRNA vaccines, antigen-presenting cells utilize LNPs through uptake to elicit antigen-specific immunity. There are reports on the impact of various physical characteristics of LNPs, particularly those with sizes less than 200 nm, especially 50 to 150 nm, on the overall stability and protective efficacy of mRNA vaccines. To address this, a single change in the size of LNPs using the same mRNA stock solution was assessed for the physicochemical characterization of the resulting mRNA-LNPs vaccine, along with the evaluation of their protective efficacy. Particles of smaller sizes generally disperse more effectively in solutions, with minimized occurrence of particle precipitation and aggregation. Here, we demonstrate that the vaccine containing 80–100 nm mRNA-LNPs showed the best stability and protection at 4°C and −20°C. Furthermore, we can conclude that freezing the vaccine at −20°C is more appropriate for maintaining stability over the long term. This effort is poised to provide a scientific basis for improving the quality of ongoing mRNA vaccine endeavors and providing information on the development of novel products.