Long-term Productivity Research Articles

Abstract 4134935: Impact of COVID-19 on Cardiology Fellows and Faculty in the United States: Two Years Later

Introduction: Recent data demonstrated that the COVID-19 pandemic adversely affected cardiovascular fellows in training (cFIT) and faculty in terms of educational disruption and search for job prospects, respectively. However, less is known about the pandemic's effect on cFIT and faculty in terms of general well-being, shifts in personal and professional priorities, quantitative measures of stress levels, and research productivity. Methods: A national survey targeting cFIT and faculty was developed to assess the effect of the pandemic two years later on these parameters. Fifty-four participants, including 21 cFIT and 33 faculty, responded to the survey. The survey was distributed between October 2021 and May 2022 to program directors of ACGME-accredited general cardiology fellowship programs in the United States. Results: 30% of cFITs perceived impaired clinical training during the pandemic; 36% of fellows experienced a decline in their clinical skills in the cardiac catheterization lab, while 27% experienced a decrease in their echocardiographic skills. Additionally, a significant percentage of cFIT reported negative interference in their competencies in nuclear cardiology (27%) and electrophysiology (12%). Most participants (76%), including faculty and fellows, reported several health issues such as sleep problems, low energy, changes in appetite, difficulty concentrating, and restlessness due to the pandemic. 43% of the faculty and 61% of cFIT reported high rates of impaired short-term productivity (Figure). Conclusion: In this national survey, we found that two years after the onset of the COVID-19 pandemic, cardiology fellows and faculty continued to experience significant concerns for decreased hands-on training and diminished research productivity. While faculty were not distressed regarding decreased clinical competencies, concerns about short-term and long-term research productivity persisted. Faculty and fellows all experienced increased stress levels and impaired productivity. Although limited by a small sample size, which can introduce bias, these results signal the importance of performing a follow-up study on the impact of COVID-19 on wellness as well as the impact on career.

A DYNAMIC ANALYSIS OF THE IMPACTS OF A CONSUMPTION TAX INCREASE AND A PRODUCTIVITY SHOCK: CALIBRATED FOR THE BRAZILIAN ECONOMY

Objective: Analyze the effects of high consumption tax on key macroeconomic variables. Method: The analysis employs both a Dynamic General Equilibrium (DGE) model and a Dynamic Stochastic General Equilibrium (DSGE) model, calibrated to the Brazilian economy. The models simulate the impact of an increase in the consumption tax on key macroeconomic variables and the impact of a productivity shock in an economy with and without taxation, respectively. Results and Discussion: The results show that an increase in the consumption tax leads to a gradual decline in the capital stock and a sharp reduction in labor supply. Furthermore, productivity shocks have weaker positive effects on investment, output, consumption, and the capital stock in an economy with high taxation compared to one without it. The discussion emphasizes the importance of these findings in understanding the trade-offs between taxation and economic activity. Research Implications/Value: The findings suggest that effective allocation of tax revenues—such as investments in infrastructure, education, and technology—is essential to mitigate the negative impacts of consumption taxes on economic performance and foster long-term productivity and growth.

Effective Microbial Strategies to Remediate Contaminated Agricultural Soils and Conserve Functions

The growing global emphasis on sustainable agriculture has brought increased attention to the health and productivity of soils, especially through the lens of soil microbiology. Microbial communities in soil are essential for nutrient cycling, organic matter decomposition, and maintaining overall soil health. However, agricultural practices, including synthetic fertilizers and intensive farming, have led to short time impacts in these microbial ecosystems, potentially threatening soil fertility and environmental quality. Agricultural expansion and food production generate waste and chemical inputs, such as heavy metals, pesticides, and herbicides, leading to significant environmental contamination. This scenario requires the implementation of remediation strategies that are both sustainable and energy efficient. In this context, microbiological processes present a much promising approach to mitigating the environmental impacts of soil pollution. Techniques such as bioremediation, which harness the natural metabolic capabilities of soil microorganisms, and bioaugmentation, which involves the introduction of specific microbial strains to increase degradation processes, are being explored. These approaches are vital for restoring soil health, contributing to environmental conservation and soil biodiversity, improving nutrient cycling, and promoting long-term agricultural productivity.

Comparison of suckling and artificial rearing on calf growth and milk requirements in pastoral dairy systems

Context Dairy calf-rearing practises have the potential to influence profitability through milk requirements at rearing, and affect lifetime productivity and market access from an animal-welfare perspective. Aims The aim of this research was to compare calf growth and milk requirements by using conventional artificial rearing (AR) and restricted milk allocation with AR and high milk allocation or suckled calves. Methods Forty-five Friesian × Jersey calves were allocated to be either AR on 6 L/calf.day, (ARC) or 12 L/calf.day, (ARH), or suckled with dams in a cow–calf contact system using partial contact (15 h/day, CCC). AR calves were fed, and intake measured, using an automatic feeder, whereas CCC calves had access to their dams between 1500 hours and 0600 hours. Calves were transitioned off milk, once they reached at least 75 kg liveweight (LW), by gradually reducing their milk allocation (AR) or reducing access to their dam (CCC). Key results Milk consumption for ARH was greater than for ARC calves (382 vs 450 L/calf, P < 0.05), whereas for CCC calves milk-yield difference between dams for the control and suckling groups during the suckling period and over the full season was 706 and 1048 L/cow respectively. There was no difference in weaning weight of calves (87 ± 1.7 kg LW), but, owing to differences in pre-weaning growth rate, age to weaning was youngest (P < 0.05) for CCC (55 days), followed by ARH (62 days) and ARC (73 days). Respective growth rates between birth and weaning (P < 0.001) for CCC, ARH and ARC calves were 0.955, 0.873 and 0.755 ± 0.028 kg/day. Although there was a growth check among CCC calves during the weaning period, there were no post-weaning differences in growth rate among the groups. Conclusions Increasing milk allowance had the benefit of improving calf pre-weaning growth rate, giving the option of weaning calves either earlier or when heavier. However, milk yield losses under suckling systems may be too high to warrant the elevated pre-weaning growth of calves. Implications The costs–benefits of high milk allocation or suckling systems need to be ascertained over the lifetime of the animals to assess long-term survival and productivity outcomes.

Políticas gubernamentales en pandemia y el Plan Nacional de Competitividad y Productividad

The study presents an analysis of government policies implemented during the pandemic in Peru and their impact on the National Plan for Competitiveness and Productivity (PNCP). Measures taken in areas such as health, economy, education, and security are examined, highlighting their comprehensiveness and the progress observed until June 2024. Despite challenges, significant compliance with PNCP objectives was achieved, reflecting the country's resilience. The study demonstrates the crucial influence of government policies on long-term competitiveness and productivity. Future research on the long-term economic and social impact of these policies is suggested, along with possible additional strategies to enhance governmental response to similar crises.

Tapping below the lateral line does not reduce maple sap yield or quality

Modern maple sugaring operations use vacuum tubing systems to enhance sap flow and maximize yield. The positioning of tapholes is a crucial aspect influencing tree health and sap yields, but is limited by dropline length. Inverting droplines to expand the tappable zone and reduce the risk of over-tapping has raised concerns about vacuum efficiency and microbial contamination.We examined over 2200 trees on multiple high-vacuum 5/16″ tubing systems at two sites over three seasons, tapping at various heights above and below the lateral line. Our analysis showed no significant decrease in sap yield or sugar concentration when tapping below the lateral line. Taps at extreme heights above the lateral line produced slightly more sap (estimated at 0.6 l of sap per tap for a good production season) and marginally sweeter sap (0.06 °Brix). However, differences in vacuum management had a more significant impact on yield. Additionally, there was no evidence of increased microbial activity or changes in sap pH due to relative tapping height.These findings demonstrate that tapping below the lateral line effectively doubles the tappable zone without significantly affecting sap yield or quality, promoting sustainable maple sugaring practices by ensuring long-term productivity without compromising sap yields or quality.

Toward production zonal flow allocation using novel completion tracer dosing line and diffuser: Prototype laboratory flow loop experiments and computational fluid dynamics studies

Complex completion schemes with inflow control valves (ICVs) in multi-lateral wells are now the industry standard for modern fields. Understanding the production contributions from different production zones/laterals is of great importance in optimizing the zonal flow rates to prolong the field lifetimes, reduce water cuts and the associated costs, and achieve production targets. Furthermore, the improved operational efficiency can reduce the producers’ energy usages and carbon footprints for a more sustainable operation. For the past decade, inflow tracer technology based on embedding tracers in degradable polymer matrices, which are then placed in downhole completion zones at initial installation, has been used in understanding production zonal flow contributions in field demonstrations as well as in commercial projects. However, the current technology based on degradable polymers has the following limitations: (1) there are limited lifetimes for the degradable polymer matrices that will lose their functionality past their expiration dates, and (2) the tracers are released from the polymer matrices at a constant rate; so in order to create a transient for tracer flowback measurements the wells need to be shut-in for a period of time which will interfere with normal production and possibly, with the long-term productivity of the well. Here, we introduce an alternative approach for deploying inflow tracers that has no such limitations mentioned above. Specifically, we propose the installation of passive chemical tracer dosing lines connected to diffuser chambers at the annular regions downhole during completion. Pulses of tracers can be injected into the different production zones and monitored for their flowback characteristics on-demand. The passive tracer dosing lines and diffusers only require minimum upfront investments and have no limitations of lifetime compared to the degradable polymer matrices. Furthermore, the injection of tracer pulses into the annulus near production zones creates appropriate transient responses for their flowback measurements, which do not require well shut-in and will not affect normal production.Laboratory flow loop experiments and computational fluid dynamics (CFD) studies were performed to demonstrate the proposed methodology and to understand the underlying physics. Half-scale and quarter-scale flow loops made of transparent polyvinyl chloride (PVC) pipes that resemble annular regions near the ICVs were constructed with tracer dosing lines and diffusers attached within. Colored dyes were injected into the flow loops to visualize their flush out and flowback behaviors. In CFD studies, a two-step approach was used with first solving for the turbulent fluid flow profiles, and then solving for the tracer convection diffusion behaviors in the turbulent fields. The CFD model parameters were carefully matched with flow loop experiments to predict the possible real field responses. With appropriate diffuser design, we can achieve desirable zonal flow-rate-dependent tracer flowback responses with reasonable sampling times and injected tracer quantities.

Tracking orbital and suborbital climate variability in the westernmost Mediterranean over the past 13,000 years: New insights from paleoperspectives on marine productivity responses

This study presents a comprehensive analysis of a sediment record from the Western Alboran Basin (core GP04PC), utilizing palynological and geochemical tools to investigate marine productivity responses to orbital and suborbital climate variability over the past 13,000 years. High productivity during the Younger Dryas humid phase (∼12.4–11.7 ka) and the Holocene humidity optimum (∼10.5–8.5 ka) was driven by increased local river discharges resulting from rapid mountain glaciers melting and enhanced regional precipitation. During the late Holocene, frequent flood events linked to negative North Atlantic Oscillation (NAO) incursions potentially led to multicentennial-scale productivity increases. The findings indicate that periods characterized by wet regional conditions and increased river run-off, influenced by orbital (e.g., insolation cycles) and suborbital factors (e.g., NAO and Atlantic Meridional Overturning Circulation changes), consistently enhanced marine productivity in the Western Alboran Basin. The study also reveals that the current high productivity and carbon export in the Western Alboran Basin are maintained by active upwelling and downwelling systems driven by a persistent positive NAO phase following the southward migration of the Intertropical Convergence Zone (ITCZ) that occurred around 6.5 ka. Furthermore, geochemical proxies support a strong detrital influence on trace metal concentrations, including barium (Ba), in deep Western Alboran sediments during the Holocene. This limits the use of Ba/Al ratios for accurately reconstructing productivity changes and highlights the importance of dinocyst analysis as a complementary tool for robust marine productivity reconstructions in this region. These observations provide valuable paleoperspectives on marine ecosystem responses to climate variability, contributing to the development of robust long-term productivity models essential for adapting to ongoing environmental changes in the region, and demonstrating the strong influence of North Atlantic climate and ocean dynamics on centennial-scale productivity oscillations in this region.

Detecting Drought-Related Temporal Effects on Global Net Primary Productivity

Drought has extensive, far-reaching, and long-lasting asymmetric effects on vegetation growth worldwide in the context of global warming. However, to date, few scholars have attempted the systematic quantification of the temporal effects of drought on global vegetation across various vegetation types and diverse climate zones. Addressing this gap, we quantitatively investigated the effects of drought on global vegetation growth under various scenarios, considering lagged and cumulative effects as well as combined effects in the 1982–2018 period. Our investigation was based on long-term net primary productivity (NPP) and two multiple-timescale drought indices: the standardised precipitation index (SPI) and the standardised precipitation and evapotranspiration index (SPEI). Our main findings were the following: (1) SPI and SPEI exhibited lagged effects on 52.08% and 37.05% of global vegetation, leading to average time lags of 2.48 months and 1.76 months, respectively. The cumulative effects of SPI and SPEI were observed in 80.01% and 72.16% of global vegetated areas, respectively, being associated with relatively longer cumulative timescales of 5.60 months and 5.16 months, respectively. (2) Compared to the scenario excluding temporal effects, there were increases in the explanatory powers of SPI and SPEI for variations in vegetation NPP based on the lagged, cumulative, and combined effects of drought: SPI increased by 0.82%, 6.65%, and 6.92%, respectively, whereas SPEI increased by 0.67%, 5.73%, and 6.07%, respectively. The cumulative effects of drought on global vegetation NPP were stronger than the lagged effects in approximately two-thirds (64.95% and 63.52% for SPI and SPEI, respectively) of global vegetated areas. (3) The effects of drought on vegetation NPP varied according to climate zones and vegetation types. Interestingly, vegetation in arid zones was the most sensitive and resilient to drought, as indicated by its rapid response to drought and the longest cumulative timescales. The vegetation NPP in tropical and temperate zones exhibited a relatively stronger response to drought than that in cold and polar zones. The strongest correlation of vegetation NPP with drought occurred in shrubland areas, followed by grassland, cropland, forest, and tundra areas. Moreover, for each vegetation type, the correlations between vegetation NPP and drought differed significantly among most climate zones. (4) The vegetation NPP in warming-induced drought regions displayed a higher correlation to drought than that in non-warming-induced drought regions, with shorter lagged and longer cumulative timescales. Our findings highlight the heterogeneity of the lagged, cumulative, and combined effects of drought across various climate zones and vegetation types; this could enhance our understanding of the coupling relationship between drought and global vegetation.

Productivity experienced a more rapid enhancement trend than greenness across the Tibetan Plateau

Satellite-derived products and field measurements verify that Tibetan Plateau (TP) has been experiencing continuous vegetation greening and productivity increase; however, it remains unclear how this greening translates into productivity and how long-term productivity variations depend on greenness across the TP. Moreover, ignoring the accuracy evaluation of satellite-derived greenness and productivity products may mislead the understanding of TP vegetation changes. Thus, we initially assessed the accuracy of three widely used leaf area index (LAI, proxy of greenness) products (i.e., MODIS, GLASS and GEOV2 LAI) and three gross primary productivity (GPP, proxy of productivity) products (i.e., MODIS, GLASS and PML-V2 GPP) to selected robust products to represent greenness and productivity respectively. Then, we explored the dependence of spatiotemporal GPP dynamics on greenness variations during 2000–2020. Results indicated that PML-V2 GPP and MODIS LAI were more robust and reliable than other satellite-derived products when compared to the reference values. They revealed a prevailing increase in GPP over the past two decades, with a regional average of 71 % higher than that of LAI. Notably, the area proportion of significant productivity enhancement was 31.6 % higher than that of significant greening. About 24.7 % of the TP displayed significantly inconsistent trends. The dependency of GPP on LAI gradually decreased with the increasing water availability, the complexity of vegetation structures, and dense canopy community. By calculating leaf photosynthetic capacity, we found that this indicator greatly regulated the velocity discrepancy between GPP and LAI, and the contribution of only greening to productivity is limited, only occupying 11.9 % of the TP, which was helpful in understanding the inter-annual changes of vegetation dynamics under varying environment conditions. We therefore reveal an unexpected rapid increase in productivity than greening during 2000–2020 on the TP, as well as highlight the caution of only using satellite-derived greenness indicators for assessing long-term changes in vegetation productivity dynamics, especially over mesic ecosystems with complex vegetation structures and dense canopies of TP.

How Do Short-Term Incentives Affect Long-Term Productivity?

Abstract Previous research shows that incentives to meet short-term earnings targets can cause firms to increase share buybacks, leading to cuts in investments and employment. Using plant-level census data, we find that incentives to engage in earnings-per-sharemotivated buybacks result in lower productivity at both the plant and firm level. We attribute this productivity drop to two mechanisms: reduced investment in productivityaugmenting technology, and inefficient allocation of resources across a firm’s plants. We identify multiple frictions—including labor unions, financial constraints, agency problems, and adjustment costs—that can constrain efficient reallocations across plants and thus exacerbate the consequences of firms’ short-term incentives. (JEL G32, G35, J23).

The Dynamics of Vegetation Evapotranspiration and Its Response to Surface Meteorological Factors in the Altay Mountains, Northwest China

The Altay Mountains’ forests are vital to Xinjiang’s terrestrial ecosystem, especially water regulation and conservation. This study evaluates vegetation evapotranspiration (ET) from 2000 to 2017 using temperature, precipitation, and ET data from the China Meteorological Data Sharing Service. The dataset underwent quality control and was interpolated using the inverse distance weighted (IDW) method. Correlation analysis and climate trend methodologies were applied to assess the impacts of temperature, precipitation, drought, and extreme weather events on ET. The results indicate that air temperature had a minimal effect on ET, with 68.34% of the region showing weak correlations (coefficients between −0.2 and 0.2). Conversely, precipitation exhibited a strong positive correlation with ET across 98.91% of the area. Drought analysis, using the standardized precipitation evapotranspiration index (SPEI) and the Temperature Vegetation Dryness Index (TVDI), showed that ET was significantly correlated with the SPEI in 96.47% of the region, while the TVDI displayed both positive and negative correlations. Extreme weather events also significantly influenced ET, with reductions in the Simple Daily Intensity Index (SDII), heavy precipitation days (R95p, R10), and increases in indicators like growing season length (GSL) and warm spell duration index (WSDI) leading to variations in ET. Based on the correlation coefficients and their significance, it was confirmed that the SII (precipitation intensity) and R95p (heavy precipitation) are the main factors causing vegetation ET increases. These findings offer crucial insights into the interactions between meteorological variables and ET, essential information for sustainable forest management, by highlighting the importance of optimizing water regulation strategies, such as adjusting species composition and forest density to enhance resilience against drought and extreme weather, thereby ensuring long-term forest health and productivity in response to climate change.

Effects of Planting Density and Nitrogen Fertilization on Growth Traits and Leaf and Wood Characteristics of Three Poplar Clones

A comprehension of the effects planting density and nitrogen (N) fertilization have on the physiological and morphological characteristics of trees is critical for optimizing the require size and characteristics of wood products. We evaluated the growth traits and the leaf and wood characteristics of three clone poplars including Populus simonii × P. nigra ‘Xiaohei’, ‘Xiaohei-14’ and ‘Bailin-3’ under five planting densities (1666, 1111, 833, 666, and 555 tree ha−1) and four N fertilization rates (0, 100, 160, and 220 g tree−1 year−1). The results show that the clone type significantly affected all observed indicators, while planting density and N fertilization treatments had a significant effect on growth traits and leaf characteristics, but not on wood characteristics. Specifically, the clone ‘Bailin-3’ exhibited the largest annual increments in tree height and diameter at breast height (DBH), leaf width, N content, and soluble protein content. A decrease in initial planting density (from 1666 to 555 tree ha−1) led to an increased annual incremental tree height and DBH, regardless of clone type and N fertilization treatment. N fertilization treatment significantly impacted the annual increment in DBH, but not that of tree height. Further, the annual increments in tree height and DBH were positively correlated with leaf width, N content, chlorophyll content, and soluble protein content, and negatively correlated with hemicellulose content. In addition, the chlorophyll and soluble protein contents were identified as the most reliable predictors of the annual increments in tree height and DBH. Our results demonstrate the clone ‘Bailin-3’ with 555 tree ha−1 under 160 g N tree−1 yr−1 showed superior growth traits and leaf characteristics. Thus, it is recommended for future poplar silviculture of larger diameter timber production at similar sites. The results contribute to understanding of the effects of planting density and fertilization on the growth traits and the leaf and wood characteristics of three poplar clones, offering valuable guidance for the sustainable development and long-term productivity of poplar plantations.

INFLUENCE OF CLIMATIC ACCIDENTS ON THE FREQUENCY OF CROP REGROWTH IN THE KABOUA DISTRICT (SAVE COMMUNE), BENIN

The Kaboua arrondissement is facing increasing challenges related to climate incidents, such as droughts, floods, and temperature variations. These events disrupt not only traditional cropping cycles but also affect the frequency of crop regrowth, which is essential for food security and the income of local farmers. The general objective of this research is to analyze the influence of climate incidents on crop regrowth in the study area. The data used include rainfall heights from 1928 to 2018, as well as maximum and minimum temperatures from 1961 to 2018, all sourced from the Savè meteorological station. This data was collected from Meteo-Benin. Additionally, a survey was conducted among the population of the Kaboua arrondissement to correlate meteorological data with local field observations. The results of this research showed that climate change alters the rainy seasons and growing periods, leading to crop losses and difficulties in maintaining sustainable crop regrowth. It is essential to emphasize that regrowth plays a key role in helping producers cope with food insecurity during the lean season. Furthermore, according to 95% of the surveyed producers, it also helps meet their financial needs. Regrowth is also crucial in the soil fertility cycle, serving as a vital link in the conservation and regeneration of nutrients necessary for crop growth. Its impact on soil health and quality is fundamental to maintaining long-term agricultural productivity.

Role of Training and Development Programs in Enhancing the Employees Job Satisfaction and Loyalty

Purpose: The aim of this literature review is to examine the relationship between training and development programs and employee loyalty and job satisfaction. By evaluating how these programs improve abilities and promote development, the research aims to emphasize how crucial they are for developing potential and assisting Design/Methodology/ A narrative analysis of relevant literature was conducted, utilizing Boolean operators such as "OR" and "AND" to refine the search. Specifically, the search strategy employed the query ((training) OR (development)) AND (job satisfaction)) OR (employee loyalty), focusing on articles published in English between 2018 and 2024. PubMed served as the primary database for sourcing pertinent studies. Findings: Effective training and development initiatives greatly increase employee loyalty and work satisfaction, according to the report. These programs improve productivity and performance on an individual basis while also enhancing company culture and overall efficacy. Implications/Originality/Value: The results highlight how important it is for businesses to undertake training and development strategically. Long-term success depends on these programs' ability to increase operational effectiveness and cultivate a dedicated staff. Companies must give priority to tailored training programs that meet employee demands in order to adjust to the changing business environment and guarantee long-term growth, productivity, and happiness.

Leaf habit drives leaf nutrient resorption globally alongside nutrient availability and climate

Abstract. Nutrient resorption from senescing leaves can significantly affect ecosystem nutrient cycling, making it an essential process to better understand long-term plant productivity under environmental change that affects the balance between nutrient availability and demand. Although it is known that nutrient resorption rates vary strongly between different species and across environmental gradients, the underlying driving factors are insufficiently quantified. Here, we present an analysis of globally distributed observations of leaf nutrient resorption to investigate the factors driving resorption efficiencies for nitrogen (NRE) and phosphorus (PRE). Our results show that leaf structure and habit, together with indicators of nutrient availability, are the two most important factors driving spatial variation in NRE. Overall, we find higher NRE in deciduous plants (65.2 % ± 12.4 %, n=400) than in evergreen plants (57.9 % ± 11.4 %, n=551), likely associated with a higher share of metabolic N in leaves of deciduous plants. Tropical regions show the lowest resorption for N (NRE: 52.4 % ± 12.1 %), and tundra ecosystems in polar regions show the highest (NRE: 69.6 % ± 12.8 %). At the same time, the PRE is lowest in temperate regions (57.8 % ± 13.6 %) and highest in boreal regions (67.3 % ± 13.6 %). Soil clay content, N and P atmospheric deposition (globally available proxies for soil fertility), and mean annual precipitation (MAP) play an important role in this pattern. The statistical relationships developed in this analysis indicate the important role of leaf habit and type for nutrient cycling and guide improved representations of plant-internal nutrient recycling and nutrient conservation strategies in vegetation models.

Examining the adaptability of soil pH to soil dynamics using different methodologies: A concise review

Soil pH is crucial to soil health, influencing nutrient availability, microbial activity, and plant growth. This review aims to assess the adaptability of soil pH under changing soil conditions by analyzing natural and human factors. Information was gathered from various sources, including peer-reviewed articles, field studies, and recent advances in soil science. The study explores how natural factors such as parent material, climate, and vegetation establish baseline soil pH, while human activities such as intensive farming and land-use changes further modify it, often leading to soil acidification or alkalinization. Traditional management methods like lime application, organic amendments, and crop rotation are reviewed for their effectiveness in stabilizing soil pH and their limitations under varying soil conditions. The review also explores modern technological innovations like precision agriculture, which uses soil sensors and variable rate technology for targeted pH management, and biological approaches, such as microbial inoculants, to enhance nutrient cycling and organic matter decomposition. Integrating these traditional and contemporary approaches is essential for sustainable soil pH management and long-term productivity. The findings highlight the need for a holistic approach that combines historical knowledge with emerging technologies to promote sustainable agricultural practices and environmental conservation.

Strategic design to ensure the sustainable productivity of military division government organization

This study aims to analyze the impact of the balanced scorecard and good corporate governance on the productivity of military government organizations and develop strategies to ensure their sustainability. This research implements a mixed-methods strategy utilizing a sequential explanatory research plan. This process is followed by a Mapping strategy, culminating in the presentation of conclusions. One hundred individuals who worked in military government agencies were surveyed as part of this study. This analysis comprises quantitative and qualitative data collected from 100 personnel of the government agency within the military division. This study determined that the environment is the primary factor in guaranteeing the long-term productivity sustainability of government organizations within military divisions. The implication is that leaders need to conduct in-depth research and be aware of environmental changes, both internal and external, that occur in military departmental government organizations.

Comparative study of first lactation performance of Norwegian Red crossbred cows with traditional breeds in New Zealand dairy systems

ABSTRACT Some New Zealand dairy farmers are using semen from Norwegian Red (NR) bulls to explore the performance of this breed under local grazing conditions. The objective of this study was to compare the first lactation performance of first cross NR cattle with traditional New Zealand breeds. Data were collected from six dairy farms in Southland, New Zealand, during 2022–2023 milk production seasons. Data were collected from 1178 first lactation cows including herd test of daily yields of milk, fat and protein and somatic cell counts, and persistency. Breeds included 386 NR cross (NRX), 231 Holstein Friesian (F), 84 Holstein Friesian cross (FX), 134 Holstein Friesian x Jersey (FJ) and 58 Jersey cross (JX) cows. Findings indicate F cows produced the greatest cumulative milk yield (3,744 kg), 138.6 kg more than NRX cows. There were no significant differences among the breed groups for milk yield and milk solids yield persistency and SCS (SCS = Log2 SCC). The total lactation milk yield of NRX cows was lower than that of the other breeds, excluding JX. These results pertain specifically to first lactation cows; therefore, it is necessary to undertake further analysis to evaluate the long-term productivity and longevity of NR breeds under New Zealand conditions.

Enhancing Government Services to Rice Farmers in the Philippines: A Service Quality–Sustainability-Focused Approach for Long-Term Agricultural Resilience

In the Philippines, where agriculture plays a vital role in the economy, nearly half of the country’s 30 million hectares of land is used for agricultural purposes. Despite government efforts to support rice farmers, challenges, such as production failures and profit losses, remain prevalent. This study evaluates the quality of government services provided to rice farmers through a service quality-based framework (SERVQUAL), assessing five key dimensions: assurance (AS), empathy (EM), reliability (RL), responsiveness (RS), and tangibility (TA). Structural equation modeling (SEM) is employed to examine the relationships among these service quality dimensions and other latent variables, including service quality (SQ), farmers’ satisfaction (FS), farmers’ trust (FT), perceived security (PS), and perceived effectiveness (PE). Data were gathered from 400 respondents using a 55-item survey. The findings indicate that perceived security (PS) is the most critical factor in enhancing the overall quality of government services. The study emphasizes the importance of adopting a SERVQUAL-based approach, with a focus on reliability and responsiveness to improve farmers’ satisfaction and trust. Additionally, fostering trust between farmers and the government is crucial to increasing the effectiveness of government programs and strengthening farmer–government collaboration. The study further advocates for prioritizing sustainable agricultural practices to ensure long-term productivity and environmental resilience. By improving service quality with a focus on sustainability, the Philippines can work towards achieving broader sustainable development goals.