Long-term Culture Research Articles

Integrative Proteomics-Metabolomics of In Vitro Degeneration of Cardiovascular Cell Lines.

Long-term cell culture is an important biological approach but is also characterized by degeneration in cellular morphology, proliferation rate, and function. To explore this phenomenon in a systematic way, we conducted an integrative proteomics-metabolomics measurement of two cardiovascular cell lines of AC16 and HUVECs. The 18th culturing passages, i.e., G18, showed as the turning points by cell metabolism profiles, in which the metabolomic changes demonstrated the dysfunction of energy, amino acid, and ribonucleotide metabolism metabolic pathways. Although active protein networks showed mitochondria abundance AC16 and oxidative/nitrative sensitive HUVECs indicated the different degeneration patterns, the G18 and G30 proteomics evidenced the senescence by processes of signal transduction, signaling by interleukins, programmed cell death, cellular responses to stimuli, cell cycle, mRNA splicing, and translation. Some crucial proteins (RPS8, HNRNPR, SOD2, LMNB1, PSMA1, DECR1, GOT2, OGDH, PNP, CBS, ATIC, and IMPDH2) and metabolites (L-glutamic acid, guanine, citric acid, guanosine, guanosine diphosphate, glucose 6-phosphate, and adenosine) that contributed to the dysregulation of cellular homeostasis are identified by using the integrative proteomic-metabolomic analysis, which highlighted the increased cellular instability. These findings illuminate some vital molecular processes when culturing serial passages, which contribute holistic viewpoints of in vitro biology with emphasis on the replicative senescence of cardiovascular cells.

MicroRNA Analysis of In Vitro Differentiation of Spermatogonial Stem Cells Using a 3D Human Testis Organoid System.

Spermatogenesis produces male gametes from spermatogonial stem cells (SSC), beginning at puberty. Modern-day laboratory techniques allow for the long-term culture of SSC and in vitro spermatogenesis. The specific biochemical processes that occur during spermatogenesis remain poorly understood. One particular element of spermatogenesis that has yet to be characterized is the role of microRNAs (miRNA), short, non-transcribed RNAs that act as post-translational regulators of gene activity. In this study, we seek to describe the presence of miRNA in a two-dimensional (2D) SSC culture and a 3D human testis organoid (HTO) system. Testicular cells were isolated from the frozen tissue of three brain-dead subjects, propagated in cultures for four to five weeks, and used to form 3D HTOs. Following organoid formation, differentiation of testicular cells was induced. RNA was isolated from the whole testis tissue (WT) showing in vivo conditions, HTO Day Zero (2D SSC culture), Day 2 HTOs, and Day 23 differentiated HTOs, then analyzed for changes in miRNA expression using the Nanostring nCounter miRNA panel. One hundred ninety-five miRNAs met the criteria for expression in WT, 186 in 2D culture, 190 in Day 2 HTOs, and 187 in differentiated HTOs. One hundred thirty-three miRNAs were common across all conditions, and 41, 17, 6, and 11 miRNAs were unique for WT, 2D culture, Day 2 HTOs, and differentiated HTOs, respectively. Twenty-two miRNAs were similar between WT and differentiated HTOS. We evaluated the miRNA expression profiles of progressively complex stages of testicular cell culture, culminating in a 3D organoid model capable of meiotic differentiation, and compared these to WT. We identified a great variance between the native tissue and the culture system; however, some miRNAs are preserved. These data may provide avenues for deeper understanding of spermatogenesis and the ability to improve this process in the laboratory. Research on miRNA continues to be an essential avenue for understanding human spermatogenesis.

Formation and Long-Term Culture of hiPSC-Derived Sensory Nerve Organoids Using Microfluidic Devices.

Although methods for generating human induced pluripotent stem cell (hiPSC)-derived motor nerve organoids are well established, those for sensory nerve organoids are not. Therefore, this study investigated the feasibility of generating sensory nerve organoids composed of hiPSC-derived sensory neurons using a microfluidic approach. Notably, sensory neuronal axons from neurospheres containing 100,000 cells were unidirectionally elongated to form sensory nerve organoids over 6 mm long axon bundles within 14 days using I-shaped microchannels in microfluidic devices composed of polydimethylsiloxane (PDMS) chips and glass substrates. Additionally, the organoids were successfully cultured for more than 60 days by exchanging the culture medium. The percentage of nuclei located in the distal part of the axon bundles (the region 3-6 mm from the entrance of the microchannel) compared to the total number of cells in the neurosphere was 0.005% for live cells and 0.008% for dead cells. Molecular characterization confirmed the presence of the sensory neuron marker ISL LIM homeobox 1 (ISL1) and the capsaicin receptor transient receptor potential vanilloid 1 (TRPV1). Moreover, capsaicin stimulation activated TRPV1 in organoids, as evidenced by significant calcium ion influx. Conclusively, this study demonstrated the feasibility of long-term organoid culture and the potential applications of sensory nerve organoids in bioengineered nociceptive sensors.

Comparison of primordial germ cell differences at different developmental time points in chickens.

Recently, the application in the field of germplasm resource conservation has become an important application of primordial germ cells (PGCs). However, due to the lack of deep understanding of the biological characteristics of PGCs at different time points, there is no systematic scheme for the selection of PGCs at which time points in practical application, which affects the practical application effect of PGCs. This study aims to clarify the differences in PGCs during development. Here, migration experiment, EdU proliferation assay and cell apoptosis assay were conducted to compare the differences in the migration ability, the proliferation ability and the recovery efficiency among female and male PGCs at E3.5, E4.5 and E5.5, which were explained by the following transcriptome sequencing analysis. We found that there were larger differences between female and male PGCs at different embryonic ages, while smaller differences between female and male PGCs at the same embryonic age. Further comparison showed that the cell migration ability of female and male PGCs decreased gradually during development, so female and male PGCs at E3.5 are more suitable for in vitro allotransplantation. At the same time, the proliferation ability of PGCs gradually decreased during development, and cell adhesion and extracellular matrix communication were weakened, indicating that female and male PGCs of E3.5 are more suitable for in vitro long-term culture cell line establishment. Interestingly, female and male PGCs at E5.5 showed strong DNA damage repair ability, thus more suitable for in vitro long-term cryopreservation. This study provides a theoretical basis for systematically selecting PGCs at suitable developmental time points as cell materials for efficient utilization by analyzing the characteristics of female and male PGCs at different developmental time points based on transcriptome.

All-aqueous synthesis of alginate complexed with fibrillated protein microcapsules for membrane-bounded culture of tumor spheroids

Water-in-water (W/W) emulsions provide bio-compatible all-aqueous compartments for artificial patterning and assembly of living cells. Successful entrapment of cells within a W/W emulsion via the formation of semipermeable capsules is a prerequisite for regulating on the size, shape, and architecture of cell aggregates. However, the high permeability and instability of the W/W interface, restricting the assembly of stable capsules, pose a fundamental challenge for cell entrapment. The current study addresses this problem by synthesizing multi-armed protein fibrils and controlling their assembly at the W/W interface. The multi-armed protein fibrils, also known as ‘fibril clusters’, were prepared by cross-linking lysozyme fibrils with multi-arm polyethylene glycol (PEG) via click chemistry. Compared to linear-structured fibrils, fibril clusters are strongly adsorbed at the W/W interface, forming an interconnected meshwork that better stabilizes the W/W emulsion. Moreover, when fibril clusters are complexed with alginate, the hybrid microcapsules demonstrate excellent mechanical robustness, semi-permeability, cytocompatibility and biodegradability. These advantages enable the encapsulation, entrapment and long-term culture of tumor spheroids, with great promise for applications for anti-cancer drug screening, tumor disease modeling, and tissue repair engineering.

TNF reduces osteogenic cell fate in PDL cells at transcriptional and functional levels without alteration of periodontal proliferative capacity.

To investigate the effect of tumor necrosis factor (TNF) on the growth of human periodontal ligament (PDL) cells, their osteogenic differentiation and modulation of their matrix secretion in vitro. The influence of 10 ng/ml TNF on proliferation and metabolic activity of PDL cells was analyzed by cell counting (DAPI [4',6-diamidino-2-phenylindole] staining) and the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) assay. In addition, cells were cultured under control conditions and osteogenic conditions (media containing 10 mMβ-glycerophosphate). Quantitative expression analysis of genes encoding the osteogenic markers alkaline phosphatase (ALP), collagen typeI alpha1 chain (COL1A1), osteoprotegerin (OPG), and osteopontin (OPN) was performed after 7 and 14days of cultivation. Calcium deposits were stained with alizarin red. Our studies showed that 10 ng/ml TNF did not affect the survival and metabolic activity of PDL cells. Quantitative expression analysis revealed that long-term cultures with TNF impaired osteogenic cell fate at early and late developmental stages. Furthermore, TNF significantly reduced matrix secretion in PDL cells. The present data confirm TNF as aregulatory factor of proinflammatory remodeling that influences the differentiation behavior but not the metabolism and cell proliferation of the periodontium. Therefore, TNF represents an interesting target for the regulation of orthodontic remodeling processes in the periodontium.

Generation and Characterization of Rat Uterus Organoids from Rat Endometrial Epithelial Stem Cells.

Endometrial organoids offer valuable insights into the development and pathophysiology of endometrial diseases and serve as platforms for drug testing. While human and mouse endometrial organoids have been developed, research on rat endometrial organoids remains limited. Given that rats can better simulate certain endometrial pathologies, such as intrauterine adhesions, this study aimed to establish rat endometrial organoids. We present a detailed protocol for the isolation and culture of rat endometrial epithelial stem cells (reESCs) and the generation of rat endometrial organoids. Using a refined reESCs expansion medium, we successfully isolated and stably expanded reESCs, demonstrating their long-term culture potential. The reESC-generated organoids exhibited typical structural and functional characteristics of the endometrium, including hormone responsiveness. Our results showed that rat endometrial organoids could be cultured over a long term with stable proliferation, maintaining the glandular structure, cell polarity, and functional characteristics of the endometrial epithelium. This novel rat-derived endometrial organoid model provides a valuable platform for studying endometrial diseases and testing therapeutic interventions, with potential applications across various mammalian species.

Long-term culture and passaging of term trophoblast for the investigation of syncytiotrophoblast function

Recent advances in the use of trophoblast stem cells and organoid models have markedly enhanced our understanding of placental development and function. These models offer significant improvements over previous systems due to their extended viability in culture and capacity to replicate various trophoblast functions, such as extravillous trophoblast invasion, syncytialisation and 3D architecture. Initially, the generation of trophoblast organoids was confined to first trimester placental tissue; however, it was recently reported that term placentae can also serve as a source of trophoblast stem cells. Here, we report that both 2D proliferative cytotrophoblasts and 3D trophoblast organoids can be effectively derived from cryopreserved term cytotrophoblasts isolated by the ‘Kliman’ method of sequential trypsin digestion and Percoll density gradient centrifugation, when cultured in specialised medium. This was confirmed by the expression of characteristic trophoblast markers including cytokeratin-7, E-cadherin, and human chorionic gonadotropin beta (β-hCG). The proliferative cytotrophoblasts were induced to differentiate to syncytiotrophoblasts, marked by elevated β-hCG expression, reduced Ki67-positive nuclei, and a fused syncytial phenotype. The protocol described here enables the application of organoid models and in vitro functional studies to stored cytotrophoblast samples for the study of placental function from unique patient cohorts. Moreover, the utilization of term placental sources may alleviate ethical concerns with using cells from pregnancy terminations, thus expanding access for a broader research community.

Establishment and long-term expansion of adult hepatobiliary organoids co-cultured with liver endothelial cells

The liver has a unique ability to regenerate in response to injury or disease with hepatocytes and biliary epithelial cells (BECs) driving the regenerative response. Liver progenitor cells (LPCs) also play role in regeneration with the ability to differentiate into either hepatocytes or BECs. However, during chronic liver disease, the regenerative capacity of the liver is impaired. The use of LPCs is a promising therapeutic strategy for patients with chronic liver diseases. LPCs can be expanded in vitro as self-renewing organoids, however, most approaches to LPC organoids do not include critical cells from the LPC niche in 3D organoid cultures. In this study, we highlight the role of liver endothelial cells (LiECs), as a part of LPC niche, in supporting the hepatobiliary organoids in long-term culture even in the absence of defined growth supplements, such as Wnt agonists. Furthermore, LiECs alter the gene expression profile of hepatobiliary organoids involved in inflammation, migration, extracellular matrix organization, and receptor signaling pathway through paracrine manner. Our findings expand the role of LiECs for regulating stemness of LPCs and elucidate a role for niche cells in a LPC organoid co-culture model with a reduction in growth supplements.

The role of alternative autophagy in cell viability and response to paclitaxel treatment in v-Ha-ras-transformed NIH 3T3 cells

In confluent v-Ha-ras-transformed NIH 3T3 fibroblasts (Ras-NIH 3T3), LC3 downregulation may precede a decrease in canonical autophagy, thus contributing to cell survival. Herein, we aimed to investigate the role of alternative autophagy in the viability of long-term cultures of Ras-NIH 3T3 cells and their parental NIH 3T3 cells. As cell confluence increased with the culture period, the level of alternative autophagy, as assessed through Lamp2-Rab9 co-localization, gradually decreased in both cell lines. However, Ras-NIH 3T3 cells maintained higher levels of alternative autophagy than the parental cells did. Rab9 knockdown minimally affected NIH 3T3 cells while drastically reducing the viability of Ras-NIH 3T3 cells, which suggested that alternative autophagy plays a critical role in Ras-NIH 3T3 cells. In contrast, reactive oxygen species (ROS) production in Ras-NIH 3T3 cells was higher than that in NIH 3T3 cells during long-term culture. Moreover, NIH 3T3 cells exhibited a continual decrease in mitochondrial mass, whereas Ras-NIH 3T3 cells maintained high mitochondrial mass. Immunofluorescence analysis of mitochondrial membrane marker proteins and mitochondrial membrane potential (MMP) also demonstrated a temporal pattern of changes similar to those of mitochondrial mass. This finding could be attributed to the relatively higher level of alternative autophagy in Ras-NIH 3T3 cells facilitating the removal of damaged mitochondria. Paclitaxel treatment in Ras-NIH 3T3 cells induced an increase in canonical autophagy rates along with suppression of alternative autophagy. Ras-NIH 3T3 cells showed high sensitivity to paclitaxel at the early stage of culture, but as cell confluence increased, resistance to paclitaxel increased, showing a similar level of cell viability to the vehicle control group. The study findings suggest that alternative autophagy is more important than canonical autophagy for maintaining cell survival in response to an unfavorable environment, such as during high cell confluence and exposure to anticancer agents.

Establishment and transcriptome analysis of single blastomere-derived cell lines from zebrafish

Maintaining chromosome euploidy in zebrafish embryonic cells is challenging because of the degradation of genomic integrity during cell passaging. In this study, we report the derivation of zebrafish cell lines from single blastomeres. These cell lines have a stable chromosome status attributed to BMP4 and exhibit continuous proliferation in vitro. Twenty zebrafish cell lines are successfully established from single blastomeres. Single-cell transcriptome sequencing analysis confirms the fidelity of gene expression profiles throughout long-term culturing of at least 45 passages. The long-term cultured cells are specialized into epithelial cells, exhibiting similar expression patterns validated by integrative transcriptomic analysis. Overall, this work provides a protocol for establishing zebrafish cell lines from single blastomeres, which can serve as valuable tools for in vitro investigations of epithelial cell dynamics in terms of life–death balance and cell fate determination during normal homeostasis.

Dialysis rolled scaffold bioreactor allows extended production of monoclonal antibody with reduced media use.

Rapidly expanding biopharmaceutical market demands more cost-effective platforms to produce protein therapeutics. To this end, novel approaches, such as perfusion culture or concentrated fed-batch, have been explored for higher yields and lower manufacturing costs. Although these new approaches produced promising results, but their wide-spread use in the industry is still limited. In this study, a dialysis rolled scaffold bioreactor was presented for long-term production of monoclonal antibodies with reduced media consumption. Media dialysis can selectively remove cellular bio-wastes without losing cells or produced recombinant proteins. The dialysis process was streamlined to significantly improve its efficiency. Then, extended culture of recombinant CHO cells for 41 days was successfully demonstrated with consistent production rate and minimal media consumption. The unique configuration of the developed bioreactor allows efficient dialysis for media management, as well as rapid media exchange to harvest produced recombinant proteins before they degrade. Taken together, it was envisioned that the developed bioreactor will enable cost-effective and long-term large-scale culture of various cells for biopharmaceutical production.

Design, development, and benchmarking of a bioreactor integrated with 3D bioprinting: Application to skeletal muscle regeneration

In recent years, great efforts have been spent to create engineered muscle constructs recapitulating the 3D architecture and applying external stimulations. In this regard, tissue engineering approaches could be very promising in regenerating skeletal muscle, in which bioprinting techniques have produced encouraging results especially regarding 3D architecture. Tensile stimuli showed a fundamental role in regulating the behavior of muscle cells both in terms of 3D organizations and protein expression. Despite this promising premise, the combination of 3D bioprinting and mechanical stimulation has been poorly investigated, calling for novel approaches dealing with the mechanical stimulation of the 3D bioprinted construct and the integration of the bioprinting phase into the stimulation device. To this aim, the present work proposes the design, manufacturing, and benchmarking of a bioprinting-integrated mechanical platform conceived for mechanically stimulating a 3D muscle model directly printed into the bioreactor to foster the integration of printing and stimulation. The study consists of three main steps: 1) the design, fabrication, and mechanical characterization of stretchable supports suitable for bioprinting and long-term cell culture; 2) the design, assisted by computational tools, and the fabrication of the smart Petri dish containing the stimulation mechanism and of the final cyclic mechanical platform; 3) the in-vitro validation of the proposed platform in terms of transmission of the mechanical stimulation to the 3D construct and the biological effect of dynamic culture on 3D bioprinted muscle cells. The results highlighted excellent viability and demonstrated that the external stimulus influences the murine myoblasts behavior already after 7 days of culture. In conclusion, prototypes are now available of a mechanical platform that integrates the 3D bioprinting and is capable of stimulating 3D biological constructs for applications in the field of muscle tissue engineering.

Robust bioprocess design and evaluation of commercial media for the serial expansion of human induced pluripotent stem cell aggregate cultures in vertical-wheel bioreactors

BackgroundWhile pluripotent stem cell (PSC) therapies move toward clinical and commercial applications at a rapid rate, manufacturing reproducibility and robustness are notable bottlenecks in regulatory approval. Therapeutic applications of PSCs require large cell quantities to be generated under highly robust, well-defined, and economically viable conditions. Small-scale and short-term process optimization, however, is often performed in a linear fashion that does not account for time needed to verify the bioprocess protocols and analysis methods used. Design of a reproducible and robust bioprocess should be dynamic and include a continuous effort to understand how the process will respond over time and to different stresses before transitioning into large-scale production where stresses will be amplified.MethodsThis study utilizes a baseline protocol, developed for the short-term culture of PSC aggregates in Vertical-Wheel® bioreactors, to evaluate key process attributes through long-term (serial passage) suspension culture. This was done to access overall process robustness when performed with various commercially available media and cell lines. Process output variables including growth kinetics, aggregate morphology, harvest efficiency, genomic stability, and functional pluripotency were assessed through short and long-term culture.ResultsThe robust nature of the expansion protocol was demonstrated over a six-day culture period where spherical aggregate formation and expansion were observed with high-fold expansions for all five commercial media tested. Profound differences in cell growth and quality were revealed only through long-term serial expansion and in-vessel dissociation operations. Some commercial media formulations tested demonstrated maintenance of cell growth rates, aggregate morphology, and high harvest recovery efficiencies through three bioreactor serial passages using multiple PSC lines. Exceptional bioprocess robustness was even demonstrated with sustained growth and quality maintenance over 10 serial bioreactor passages. However, some commercial media tested proved less equipped for serial passage cultures in bioreactors as cultures led to cell lysis during dissociation, reduction in growth rates, and a loss of aggregate morphology.ConclusionsThis study demonstrates the importance of systematic selection and testing of bioprocess input variables, with multiple bioprocess output variables through serial passages to create a truly reproducible and robust protocol for clinical and commercial PSC production using scalable bioreactor systems.

Non-Invasive Quality Control of Organoid Cultures Using Mesofluidic CSTR Bioreactors and High-Content Imaging.

Human brain organoids produce anatomically relevant cellular structures and recapitulate key aspects of in vivo brain function, which holds great potential to model neurological diseases and screen therapeutics. However, the long growth time of 3D systems complicates the culturing of brain organoids and results in heterogeneity across samples hampering their applications. We developed an integrated platform to enable robust and long-term culturing of 3D brain organoids. We designed a mesofluidic bioreactor device based on a reaction-diffusion scaling theory, which achieves robust media exchange for sufficient nutrient delivery in long-term culture. We integrated this device with longitudinal tracking and machine learning-based classification tools to enable non-invasive quality control of live organoids. This integrated platform allows for sample pre-selection for downstream molecular analysis. Transcriptome analyses of organoids revealed that our mesofluidic bioreactor promoted organoid development while reducing cell death. Our platform thus offers a generalizable tool to establish reproducible culture standards for 3D cellular systems for a variety of applications beyond brain organoids.

A 3D-printed tumor-on-chip: user-friendly platform for the culture of breast cancer spheroids and the evaluation of anti-cancer drugs

Tumor-on-chips (ToCs) are useful platforms for studying the physiology of tumors and evaluating the efficacy and toxicity of anti-cancer drugs. However, the design and fabrication of a ToC system is not a trivial venture. We introduce a user-friendly, flexible, 3D-printed microfluidic device that can be used to culture cancer cells or cancer-derived spheroids embedded in hydrogels under well-controlled environments. The system consists of two lateral flow compartments (left and right sides), each with two inlets and two outlets to deliver cell culture media as continuous liquid streams. The central compartment was designed to host a hydrogel in which cells and microtissues can be confined and cultured. We performed tracer experiments with colored inks and 40 kDa fluorescein isothiocyanate dextran to characterize the transport/mixing performances of the system. We also cultured homotypic (MCF7) and heterotypic (MCF7-BJ) spheroids embedded in gelatin methacryloyl hydrogels to illustrate the use of this microfluidic device in sustaining long-term micro-tissue culture experiments. We further demonstrated the use of this platform in anticancer drug testing by continuous perfusion of doxorubicin, a commonly used anti-cancer drug for breast cancer. In these experiments, we evaluated drug transport, viability, glucose consumption, cell death (apoptosis), and cytotoxicity. In summary, we introduce a robust and friendly ToC system capable of recapitulating relevant aspects of the tumor microenvironment for the study of cancer physiology, anti-cancer drug transport, efficacy, and safety. We anticipate that this flexible 3D-printed microfluidic device may facilitate cancer research and the development and screening of strategies for personalized medicine.

Microfluidic system for generating a three-dimensional (3D) vascularized islet-on-a-chip model

Diabetes is a disease associated with the insufficiency of pancreatic endocrine part, consisting mainly of pancreatic islets. Currently, diabetes is considered the fastest growing civilization disease. Globally, over 440 million people suffer from diabetes, and it is estimated that this number will increase to 700 million by 2045. Pancreatic islets are complex, highly vascularized mini-organs, and only the development of a fully functional vascularized pancreatic islet model could lead to the progress of knowledge about diabetes evolution, new therapeutic strategies, and the islet generation for applications in regenerative medicine. Therefore, the main goal of our study was to develop a microfluidic system for the simultaneous culture of two three-dimensional (3D) research models. The device presented in this article was used to simultaneously culture a model of a blood vessel composed of endothelial cells (HUVEC) developed using the Viscous Finger Patterning (VFP) technique and a model of the pancreatic islet, which was developed using a co-culture of α and β cells. During the research, device production method was optimized, and for this purpose, the most precise micro-milling technique was compared with the rapid prototyping technique - 3D printing. The spatial arrangement of cells in the developed models, their morphology, and viability were visualized using fluorescence staining and confocal microscopy analysis. This article presents preliminary research to develop a long-term culture of a complex model imitating the connection between the microvessel and the pancreatic islet, which in the future will be used to develop new therapeutic strategies or generate fully functional islets.

Long-Term Culture of Human Pluripotent Stem Cells in Xeno-Free Condition Using Functional Polymer Films.

Human pluripotent stem cells (hPSCs), encompassing human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs), hold immense potential in regenerative medicine, offering new opportunities for personalized cell therapies. However, their clinical translation is hindered by the inevitable reliance on xenogeneic components in culture environments. This study addresses this challenge by engineering a fully synthetic, xeno-free culture substrate, whose surface composition is tailored systematically for xeno-free culture of hPSCs. A functional polymer surface, pGC2 (poly(glycidyl methacrylate-grafting-guanidine-co-carboxylic acrylate)), offers excellent cell-adhesive properties as well as non-cytotoxicity, enabling robust hESCs and hiPSCs growth while presenting cost-competitiveness and scalability over Matrigel. This investigation includes comprehensive evaluations of pGC2 across diverse experimental conditions, demonstrating its wide adaptability with various pluripotent stem cell lines, culture media, and substrates. Crucially, pGC2 supports long-term hESCs and hiPSCs expansion, up to ten passages without compromising their stemness and pluripotency. Notably, this study is the first to confirm an identical proteomic profile after ten passages of xeno-free cultivation of hiPSCs on a polymeric substrate compared to Matrigel. The innovative substrate bridges the gap between laboratory research and clinical translation, offering a new promising avenue for advancing stem cell-based therapies.

Changes in Stemness Properties of Human Adenoid-Derived Mesenchymal Stem Cells by in Vitro Aging

Mesenchymal stem cells (MSCs) have significant therapeutic potential in gene therapy. In vitro replicative senescence causes slow proliferation capacity of MSCs and changes in stem cell properties. In this study, the stem cell properties and proliferation potential of MSCs obtained from adenoid tissue, a new source of MSC, were investigated after long-term in vitro replicative senescence. Adenoid-derived MSCs (A-MSCs) were cultured up to passage 20 and were analyzed for cell morphology, proliferative capacity, differentiation potential and surface marker expression. In addition, the expression profile of cell cycle, apoptosis and senescence-related genes were evaluated. After in vitro replicative senescence, A-MSCs did not show significant morphological differences. The proliferation potential of A-MSCs was rapid up to passage 16, and a reduction in the proliferation potential of senescent cells in vitro was observed depending on the passage number. The differentiation potential of late-passage A-MSCs was also reduced compared to early-passage cells. A-MSCs also provided significant closure at the 8th hour in early passages in terms of closure of the scratch area, while late passage A-MSCs exhibited a similar closure profile at the 24th hour. In conclusion, A-MSCs have significant potential for clinical use due to the sustainability of MSC properties and their ability to proliferate and migrate with long-term culture.

3D Brain Vascular Niche Model Captures Invasive Behavior and Gene Signatures of Glioblastoma.

Glioblastoma (GBM) is a lethal brain cancer with no effective treatment; understanding how GBM cells respond to tumor microenvironment remains challenging as conventional cell cultures lack proper cytoarchitecture while in vivo animal models present complexity all at once. Developing a culture system to bridge the gap is thus crucial. Here, we employed a multicellular approach using human glia and vascular cells to optimize a 3-dimensional (3D) brain vascular niche model that enabled not only long-term culture of patient derived GBM cells but also recapitulation of key features of GBM heterogeneity, in particular invasion behavior and vascular association. Comparative transcriptomics of identical patient derived GBM cells in 3D and in vivo xenotransplants models revealed that glia-vascular contact induced genes concerning neural/glia development, synaptic regulation, as well as immune suppression. This gene signature displayed region specific enrichment in the leading edge and microvascular proliferation zones in human GBM and predicted poor prognosis. Gene variance analysis also uncovered histone demethylation and xylosyltransferase activity as main themes for gene adaption of GBM cells in vivo . Furthermore, our 3D model also demonstrated the capacity to provide a quiescence and a protective niche against chemotherapy. In summary, an advanced 3D brain vascular model can bridge the gap between 2D cultures and in vivo models in capturing key features of GBM heterogeneity and unveil previously unrecognized influence of glia-vascular contact for transcriptional adaption in GBM cells featuring neural/synaptic interaction and immunosuppression.