Stereochemical Activity Of Lone Pair Research Articles

Structure Low Dimensionality and Lone-Pair Stereochemical Activity: the Key to Low Thermal Conductivity in the Pb-Sn-S System.

Recently, metal sulfides have begun to receive attention as potential cost-effective materials for thermoelectric applications beyond optoelectronic and photovoltaic devices. Herein, based on a comparative analysis of the structural and transport properties of 2D PbSnS2 and 1D PbSnS3, we demonstrate that the intrinsic effects that govern the low lattice thermal conductivity (κL) of these sulfides originate from the combination of the low dimensionality of their crystal structures with the stereochemical activity of the lone-pair electrons of cations. The presence of weak bonds in these materials, responsible for phonon scattering, results in inherently low κL of 1.0 W/m K in 1D PbSnS3 and 0.6 W/m K in 2D PbSnS2 at room temperature. However, the nature of the thermal transport is quite distinct. 1D PbSnS3 exhibits a higher thermal conductivity with a crystalline-like peak at low temperatures, while 2D PbSnS2 demonstrates glassy thermal conductivity in the entire temperature range investigated. First-principles density functional theory calculations reveal that the presence of antibonding states below the Fermi level, especially in PbSnS2, contributes to the very low κL. In addition, the calculated phonon dispersions exhibit very soft acoustic phonon branches that give rise to soft lattices and very low speeds of sounds.

Giant ab-Plane Birefringence in Quasi-1D Fibrous Red Phosphorus.

Quasi-one-dimensional (quasi-1D) van der Waals crystal fibrous red phosphorus (RP) exhibits pronounced in-plane optical anisotropy, positioning it as a potential candidate for polarization-related micro-nano devices. Unfortunately, a comprehensive investigation into the complex refractive index of fibrous RP and the structure-activity relationship connecting the distinctive quasi-1D structure with optical anisotropy is currently deficient. Herein, we have collectively determined the complex refractive index of the fibrous RP flakes within the ab-plane through Kramers-Kronig (KK) analysis and theoretical calculation. Notably, the maximum birefringence of fibrous RP reaches 0.642@475 nm with an absolute extinction coefficient of only 0.08, superior to the reported traditional optical crystals and the emerging low-dimensional materials as well. The remarkable birefringence can be attributed to the synergistic influence of the large electronic dipole polarizability, anisotropic electron density distribution and the distortion of stereochemically active lone pair (SCALP).This work demonstrates the potential of fibrous RP for polarization-sensitive devices, illuminating possibilities to exploit novel giant birefringent crystals based on the structure-activity relationship.

The Spin-Orbit Effect on the Electronic Structures, Refractive Indices, and Birefringence of X2PO4I (X = Pb, Sn, Ba and Sr): A First-Principles Investigation.

Introducing post-transition metal cations is an excellent strategy for enhancing optical properties. This paper focuses on four isomers, namely the X2PO4I (X = Pb, Sn, Ba, and Sr) series. For the first time, the paper's attention is paid to the changes in electronic structure, as well as refractive indices and birefringence, with and without the inclusion of spin-orbit effects in this series. The first-principles results show that spin-orbit effects of the 5p and 6p states found in these compounds lead to splitting of the bands, narrowing of the band gap, enhancement of the lone-pair stereochemistry, and enhancement of the refractive indices and birefringence. Moreover, a comparison of the lone-pair electron phosphates, X2PO4I (X = Pb and Sn), and the isomeric alkaline earth metal phosphates, X2PO4I (X = Ba and Sr), reveals that changes in the band structure have a greater effect on the enhancement of the birefringence than the slight enhancement of the lone-pair stereochemical activity. This study has important implications for a deeper understanding of the optical properties of crystals and the design of novel optical materials.

Stereochemically Active Lone Pair Leads to Birefringence in the Vacancy Ordered Cs3Sb2Cl9 Perovskite Single Crystals.

Stereochemically active lone pair (SCALP) cations are attractive units for realizing optical anisotropy. Antimony(III) chloride perovskites with the SCALP have remained largely unknown to date. We synthesized a new vacancy ordered Cs3Sb2Cl9 perovskite single crystals with SbCl6 octahedral linkage containing the SCALP. Remarkably, all-inorganic halide perovskite Cs3Sb2Cl9 single crystals exhibit an exceptional birefringence of 0.12 ± 0.01 at 550 nm. The SCALP brings a large local structural distortion of the SbCl6 octahedra promoting birefringence optical responses in Cs3Sb2Cl9 single crystals. Theoretical calculations reveal that the considerable hybridization of Sb 5s and 5p with Cl 3p states largely contribute to the SCALP. Furthermore, the change in the Sb-Cl-Sb bond angle creates distortion in the SbCl6 octahedral arrangement in the apical and equatorial directions within the crystal structure incorporating the required anisotropy for the birefringence. This work explores pristine inorganic halide perovskite single crystals as a potential birefringent material with prospects in integrated optical devices.

Band Gap Narrowing by Suppressed Lone-Pair Activity of Bi3.

Post-transition metal cations with a lone pair (ns2np0) electronic configuration such as Pb2+ and Bi3+ are important components of materials for solar-to-energy conversion. As in molecules like NH3, the lone pair is often stereochemically active in crystals, associated with distorted coordination environments of these cations. In the present study, we demonstrate that suppressed lone pair stereochemical activity can be used as a tool to enhance visible light absorption. Based on an orbital interaction model, we predict that a centrosymmetric environment of the cations limits the orbital interactions with anions, deactivates the lone pair, and narrows the band gap. A high-symmetry Bi3+ site is realized by isovalent substitutions with Y3+ by considering its similar ionic radius and absence of a lone pair. The quaternary photocatalyst Bi2YO4X is singled out as a candidate for Bi substitution from a survey of the coordination environments in Y-O compounds. The introduction of Bi3+ to the undistorted Y3+ site in Bi2YO4X results in a narrowed band gap, as predicted theoretically and confirmed experimentally. The orbital interaction controlled by site symmetry engineering offers a pathway for the further development of post-transition metal compounds for optoelectronic applications.

From C4H7N2Ge0.4Sn0.6Br3 to C6H11N2Ge0.4Sn0.6Br3: Effective Modulation of the Second Harmonic Generation Effect and Optical Band Gap by Planar π-Conjugated Organic Cation Size.

In the search for nonlinear optical (NLO) materials with excellent overall performance, we have devoted ourselves to organic-inorganic hybrids consisting of anionic groups containing stereochemically active lone-pair (SCALP) electron cations and organic planar π-conjugated group cations. Accordingly, in this paper, two novel organic-inorganic hybrid metal halides, C4H7N2Ge0.4Sn0.6Br3 (I) and C6H11N2Ge0.4Sn0.6Br3 (II), have been synthesized. The powder second-harmonic technique shows that both C4H7N2Ge0.4Sn0.6Br3 and C6H11N2Ge0.4Sn0.6Br3 have moderately strong second-order nonlinear optical effects, which are about 2.03 (I) and 1.16 (II) times that of KH2PO4 (KDP), respectively. They also have different optical band gaps of 2.75 (I) and 2.88 eV (II) due to the different sizes of the organic cations, and their photoluminescent and thermal properties were also investigated. This work provides new structural insights for the design and modulation of organic-inorganic hybrid halide materials with multiple excellent optical properties.

RbPbPS4: a promising IR nonlinear optical material achieved by lone-pair-cation-substitution-induced structure transformation

When stereochemically-active-lone-pair (SCALP) cations are introduced into chalcogenide systems, it is beneficial to produce a remarkable second-harmonic generation (SHG) response (deff), but it also causes a narrow band gap (Eg),...

Rational Design of the Alkali Metal Sn-Based Mixed Halides with Large Birefringence and Wide Transparent Range.

Birefringent materials are widely used in various advanced optical systems, owing to their vital role in creating and controlling polarized light. Currently, Sn2+-based compounds containing stereochemically active lone-pair (SCALP) cations are extensively investigated and considered as one class of promising birefringent materials. To solve the problem of relatively narrow bandgap of Sn2+-based compounds, alkali metals and multiple halogens are introduced to widen the bandgap during the research. Based on this strategy, four new Sn2+-based halides, A2Sn2F5Cl and ASnFCl2 (A = Rb and Cs), with large birefringence, short ultraviolet (UV) cutoff edge, and wide transparent rangeare successfully found. The birefringences of A2Sn2F5Cl (A = Rb and Cs) are 0.31 and 0.28 at 532nm, respectively, which are among the largest in Sn-based halide family. Remarkably, A2Sn2F5Cl possess relatively shorter UV cutoff edge (<300nm) and broad infrared (IR) transparent range (up to 16.6µm), so they can become promising candidates as birefringent materials applied in both UV and IR regions. In addition, a comprehensive analysis on crystal structures and structure-property relationship of metal Sn2+-based halides is performed to fully understand this family. Therefore, this work provides insights into designing birefringent materials with balanced optical properties.

A2Hgx(SeO3)y (A = K, Rb, Cs): Three Alkali Metal Mercury Selenites Featuring Unique 1D [HgOm(SeO3)n]∞ Chains.

Herein, three alkali metal mercury selenites, K2Hg2(SeO3)3, Rb2Hg2(SeO3)3, and Cs2Hg3(SeO3)4, were successfully obtained by a hydrothermal method. The three compounds featured same one-dimensional (1D) [HgOm(SeO3)n]∞ chain structure that consisting of distorted Hg-O polyhedra and SeO3 triangular pyramids with stereochemically active lone pair (SCALP) electrons. Interestingly, the rich coordination environment of Hg atoms and the size difference of alkali metal cations lead to diverse arrangement of SeO3 groups, which makes them exhibit different birefringence. The band gaps of the three compounds indicate that they are potential ultraviolet (UV) optical materials. Detailed theoretical calculations demonstrate that the combined effects of SeO3 triangular pyramids and Hg-O polyhedra are responsible for the optical characteristics of the reported compounds.

Stereo‐Active Lone Pairs Induced Giant Polarization in a 2D Ge‐Based Halide Perovskite Antiferroelectric

AbstractAntiferroelectrics, characterized by electrically controlled antipolar‐polar phase transformation, have attracted tremendous attention as a class of promising electroactive materials for assembling electronic devices. The emerging two‐dimensional (2D) halide perovskites with superior compositional diversity offer an ideal platform for exploring electroactive materials, whereas lead‐free antiferroelectric counterparts are still scarcely reported. Herein, for the first time, a new lead‐free 2D germanium iodide perovskite antiferroelectric (i‐BA)2CsGe2I7 (1, i‐BA is iso‐butylammonium) has been presented, which exhibits a high Curie temperature (Tc) up to 403 K. Remarkably, benefiting from the lone pair stereochemical activity in Ge2+ induced large structural distortion and Cs+ ion off‐center displacement, 1 shows well‐defined double P–E hysteresis loops in a wide temperature range with a giant maximum polarization up to 18.8 µC cm−2, which achieves a new high record among molecular antiferroelectrics. Moreover, under a low external electric field of 22.5 kV cm−1, the antipolar‐polar phase transformation in 1 affords a recoverable energy storage density Wrec of 0.27 J cm−3 and high storage efficiency up to 79.76%. Such lead‐free halide perovskite antiferroelectric with intriguing antiferroelectric behaviors, including high Tc, large polarization and remarkable energy storage properties, is exciting, which provides an alternative candidate for high‐performance antiferroelectrics for environmentally friendly electronic devices.

Positive and Negative Contribution from Lead–Oxygen Groups and Halogen Atoms to Birefringence: A First Principles Investigation

Oxyhalides, containing oxygen and halogen atoms and combining the advantages of oxides and halides in geometry and optical response, have great potential in optical materials. In this study, the electronic structures and the optical properties of the Pb3O2X2 (X = Cl, Br, I) compounds have been investigated using the first principles method. The results show that these compounds have birefringence at 0.076, 0.078, and 0.059 @ 1064 nm, respectively. And, the asymmetric stereochemical active lone pair electrons were found around lead atoms, which were confirmed by the projected density of states, the electronic localization functions, and the crystal orbitals. The contribution of atoms and polyhedra to birefringence was further evaluated using the Born effective charge. The results show that halogen atoms give negative contribution, and lead—oxygen polyhedra give positive contribution. The spin—orbit coupling effect is also investigated, and the downshift of the conduction band and variation in the valence band are found after relevant spin—orbit coupling (SOC), which leads to a reduction in the band gap and birefringence.

(NH4 )2 (I5 O12 )(IO3 ) and K1.03 (NH4 )0.97 (I5 O12 )(IO3 ): Mixed-Valent Polyiodates with Unprecedented I5 O12 - Unit Exhibiting Strong Second-Harmonic Generation Responses and Giant Birefringence.

Second-harmonic generation (SHG) response and birefringence are crucial properties for linear and nonlinear optical (NLO) materials, while it is difficult to further optimize these two key properties by using a single traditional functional building block (FBB) in one compound. Herein, a novel IO4 5- unit is identified, which possesses a square-planar configuration and two stereochemically active lone-pairs (SCALPs). By combining IO4 5- and IO3 - units, the first examples of mixed-valent polyiodates featuring an unprecedented bowl-shaped I5 O12 - polymerized unit, namely (NH4 )2 (I5 O12 )(IO3 ) and K1.03 (NH4 )0.97 (I5 O12 )(IO3 ), are successfully synthesized. Excitingly, both crystals exhibit strong SHG responses (16 × KDP and 19.5 × KDP @1064nm) as well as giant birefringence (∆nexp =0.431 and 0.405 @546nm). Detailed structure-property analyses reveal that the parallel aligned planar IO4 5- units induce the properly aligned high-density SCALPs, leading to strong SHG response and giant birefringence for both materials. This work not only provides two new potential NLO and birefringent crystals, but also discovers a novel promising FBB (IO4 5- ) for developing high-performance linear and nonlinear optical materials.

ASb(SO4)2 (A = Rb, Cs): Two short-wave UV antimony sulfates exhibiting large birefringence

Herein, two antimony sulfates, named RbSb(SO4)2 (1) and CsSb(SO4)2 (2), have been successfully synthesized with the introduction of Sb3+ cation with stereochemically active lone pairs (SCALP) into sulfates by the conventional hydrothermal method. Both two compounds endow short UV absorption edges (281 nm and 278 nm, respectively) and large birefringence ([email protected] nm and [email protected] nm, respectively), which means that they are promising short-wave ultraviolet (UV) optical materials. Interestingly, though both of the two compounds exhibit similar 1D chained structures, and possess the same functional moieties including SbO4 seesaws and SO4 tetrahedral groups, they exhibit significantly opposite macroscopic symmetries, i.e., compound 1 crystallizes in a centrosymmetric (CS) manner (P21/n) and compound 2 in a noncentrosymmetric (NCS) manner (P212121), due to the size of cations [r(Rb+) = 1.56 Å, r(Cs+) = 1.67 Å] affects the orientation of SCALP of the adjacent Sb3+.

Hg3(SeO3)2(SO4): A UV Nonlinear Optical Mercury Selenite Sulfate Constructed by Neat [Hg6O8(SeO3)4]∞ Layers and SO4 Tetrahedra.

A novel mercury selenite sulfate named Hg3(SeO3)2(SO4) has been successfully synthesized under a mild hydrothermal method. Hg3(SeO3)2(SO4) crystallizes in a monoclinic space group P21 and features a unique three-dimensional (3D) frame structure formed by [Hg6O8(SeO3)4]∞ layers and SO4 tetrahedra, which enables it to exhibit a comprehensive performance of a moderate second-harmonic generation (SHG) response of approximately 1.3 times that of baseline KH2PO4 (KDP), a moderate birefringence (0.118@546 nm), and a wide band gap (4.70 eV), which indicates that it has potential for application as an ultraviolet (UV) nonlinear optical material. Detailed theoretical calculations show that the Hg2+-based polyhedra with large polarizability and deformability and the SeO3 groups with stereochemically active lone pair (SCALP) electrons are the main contributors to moderate optical properties.

Sb4O3(TeO3)2(HSO4)(OH): An Antimony Tellurite Sulfate Exhibiting Large Optical Anisotropy Activated by Lone Pair Stereoactivity

A new birefringent crystal of Sb4O3(TeO3)2(HSO4)(OH) was achieved by incorporating two stereochemically active lone pair (SCALP) cations of Sb(III) and Te(IV) into sulfates simultaneously. The Sb3+ and Te4+ ions display highly distorted coordination environments due to the SCALP effect. Sb4O3(TeO3)2(HSO4)(OH) displays a 3D structure composed of [Sb4O3(TeO3)2(OH)]∞+ layers bridged by [SO3(OH)]- tetrahedra. It possesses a large birefringence and a wide optical transparent range, making it a new UV birefringent crystal. First-principles calculation analysis suggests that the synergistic effect of the cooperation of SCALP effect of Sb3+ and Te4+ cations make a dominant contribution to the birefringence. The work highlights that units with SCALP cations have advantages in generating large optical anisotropy and are preferable structural units for designing novel birefringent materials.

Stereochemically active lone-pair-driven giant enhancement of birefringence from three-dimensional CsZn4Ga5Se12 to two-dimensional CsZnAsSe3

A novel 2D quaternary thioarsenate, CsZnAsSe3, was obtained by a stereochemically active lone pair (SCALP) induction strategy, which exhibits a 28-fold increase in birefringence compared to the known 3D framework CsZn4Ga5Se12.

New Pyrochlore-like Oxyfluorides Na2–2xSnxM2O5F2 (M = Nb5+ or Ta5+ and 1 ≤ x ≤ 0) as Potential Candidates for Overall Water Splitting Photocatalysis

Lone pair containing oxyfluorides have recently emerged as efficient and stable photocatalysts for overall water splitting (OWS). In this work we have obtained several new potential OWS photocatalysts with pyrochlore structure (i.e., Na2–2xSnxM2O5F2 with M = Nb5+ or Ta5+ and 1 ≤ x ≤ 0) through kinetically controlled ion-exchange reaction from Na2M2O5F2. Rietveld refinement of the structures as well as DFT indicate the Sn2+ lone pair stereochemical activity. The partial density of states reveals contributions at the top of the valence band that are mainly composed of a Sn 5s–Sn 5p hybridization through the (O,F) 2p orbitals. This leads to a significant narrowing of the band gap and an improvement of the photoconduction response by a factor ca. 50 with respect to the x = 0 compound, Na2Nb2O5F2. The Mott–Schottky measurements show that all materials possess band edge positions encompassing the thermodynamic redox potential of H+/H2 and O2/H2O. However, the valence band of SnNb2O5F2 may not be oxidative enough to overcome the overpotential associated with the O2– oxidation and hence could be unsuitable for OWS photocatalysis in contrast with Na1.5Sn0.25Nb2O5F2.

Li2PbB2O5: A Pyroborate with Large Birefringence Induced by the Synergistic Effect of Stereochemical Active Lone Pair Cations and π-Conjugated [B2O5] Groups.

Through the inclusion of two kinds of birefringence reactive groups, that is, Pb2+ cations with stereochemically active lone pairs and π-conjugated [B2O5] groups, a new pyroborate Li2PbB2O5 used to be acquired by the usage of the high-temperature solution method. The three-dimensional structural framework of Li2PbB2O5 is made up of highly distorted [PbO5] polyhedra and parallelly arranged π-conjugated [B2O5] groups via the connection of four- and five-coordinated Li+ cations. The birefringence of Li2PbB2O5 is 0.091 at 1064 nm, which is relatively large and revealed by the first-principles calculations. The contribution from the synergistic effect of the two kinds of birefringence reactive groups was substantiated via the analysis of the real-space atom cutting method. Also, the diffuse reflectance spectrum suggests that Li2PbB2O5 features a band gap of 4.0 eV, which corresponds to an ultraviolet (UV) cutoff edge. We hope that this work will foster further improvements in the design of UV birefringent crystal materials in the borate system.

Sn3B10O17Cl2 Achieving Birefringence Enhancement by Stereochemical Activity Lone Pair.

Sn3B10O17Cl2 was successfully obtained for the first time under the sealed environment and crystallized in the space group Pbcn belonging to the orthorhombic system, which is featured by the fundamental building blocks [B5O11] that are linked to construct a three-dimensional framework with Cl and Sn atoms located inside and at the edge of the channel to balance the charge. Moreover, the optical performance measurement shows that Sn3B10O17Cl2 owns a cutoff edge of about 280 nm. Theoretical study indicates its large optical anisotropy with the birefringence 0.125@546 nm; meanwhile, the structure-performance relationships were analyzed by the first-principle calculation.

(C4H10NO)PbX3 (X = Cl, Br): Design of Two Lead Halide Perovskite Crystals with Moderate Nonlinear Optical Properties.

Introducing electronegative species into organic constituents was considered to be one effective strategy for adjusting crystal symmetry and designing new nonlinear optical (NLO) materials. By substitution of C4 in piperidine (C5H11N) with electronegative oxygen, organic morpholine (C4H9NO) was easily obtained. Therefore, to design NLO crystals, we focused on combinations of stereochemically active lone-pair (SCALP) cation (Pb2+)-based chloride and bromide with morpholine molecules. In this work, two lead halide hybrid perovskite (C4H10NO)PbX3 (X = Cl, Br, abbreviated as MPbCl3 and MPbBr3, respectively) single crystals with moderate nonlinear optical properties were synthesized by a slow evaporation method. The two title crystals belong to orthorhombic space group P212121 with one-dimensional (1D) chainlike perovskite structures. Theoretical calculations revealed that the second harmonic generation (SHG) responses mainly originate from distorted {PbX6} octahedrons of the inorganic framework. Remarkably, moderate phase-matching SHG effects of about 0.70 and 0.81 times KH2PO4, large birefringences of 0.098 and 0.111 at 1064 nm, and large laser damage thresholds (LDTs) of 19.94 and 46.82 MW/cm2 were estimated for MPbCl3 and MPbBr3, respectively. This work provides a novel strategy for new purpose-designed hybrid NLO crystals by adjustment and modulation of chemical modification.