Log Volume Research Articles

Petrophysical Tutorial, Lessons Learned, and Evaluation Workflow: A Case Study in the Power River Basin

The objective is to empower the reader and scientific community with the knowledge and specific applicable equations to then reproduce the critical rock and fluid attributes in the Powder River Basin. To then continue to unravel the basin and its potential (both conventionally and unconventionally). The overall goal is to ensure the transfer of knowledge and communication of a petrophysical workflow that can then also influence application to other basins worldwide. The Powder River Basin is in southeast Montana and northeast Wyoming and is a prolific oil and gas (hydrocarbon-prone) sedimentary basin related to the greater Rockies chain/series of hydrocarbon-bearing basins (ex. Big Horn, Greater Green River, Denver-Jules). In this study, we briefly set-up the geological background of the Powder River Basin and the importance/ relevance to then tackling subsurface petrophysical evaluation on a regional scale. Approximately, 200 wells were evaluated petrophysically by a combined deterministic and inversion-based workflow representing an effort to share best practices, approaches, and the relative trends to apply in the basin to unravel the stratigraphic hydrocarbon potential in place. An extensive workflow involving basic petrophysical approaches such as raw log applicable cutoffs and volume of clay determination are shared as well as extending knowledge and application into advanced petrophysics through geochemical property derivation and impact of those derived properties as well as bound versus free water and hydrocarbon understanding. Results of the petrophysical analysis highlight the varying properties in conventional and unconventional formations (example Niobrara). The results of how and why the petrophysical approach was calibrated and then applied are the primary efforts accomplished.

Comparing the characteristics of boom-corridor and selectively thinned stands of Scots pine and birch

Young, dense forest in Finland and Sweden urgently need to receive first thinning. In such stands, conventional selective thinning methods make the harvester work time consuming and, thus, costly. To make small-sized trees economically competitive as raw material for bioenergy and biorefining, new harvesting technologies and/or thinning methods need to be developed. A potential solution is boom-corridor thinning (BCT), rendering effective cutting work. The aim of this study was to describe and compare the stand structure of two Scots pine stands ( L.) and one birch-dominated ( Roth with natural downy birch, Ehrh.) stand after BCT and selective thinning at the first thinning phase. Furthermore, simulations were conducted to predict the future stand development after the first thinning treatments. The density of the growing stock was 16–46% higher after BCT treatment than after selective thinning because BCT stands included more small and supressed trees with a dbh < 100 mm. However, the numbers of future crop trees with a dbh > 140 mm per hectare were at the same level in both treatments. The stem volume removal per hectare did not differ between treatments. However, simulation of stand development and intermediate thinning and clearcutting revealed that the total removal volume was 10–18% higher in BCT stands compared to selectively thinned ones. The saw log volumes harvested did, however, not differ between treatments. This study shows that BCT generates stands with higher biodiversity compared to conventional thinning as higher levels of biomass removal can be reached throughout stand rotations.Pinus sylvestrisBetula pendulaB. pubescens

Consumption Variety in Food Recommendation

This research explores the justification and implications of incorporating consumption variety into mobile-based food recommendation systems. Our study makes use of data from a popular mobile fitness app, in which we are able to observe large volumes of daily food logs of thousands of users. We first confirm that consumption variety is associated with potential health benefits, such as lower overall calories consumed, higher vegetable consumption, and lower snack consumption. In light of these suggestive health benefits from consumption variety, we seek out to design a novel multi-criteria food recommendation system (FOODVAR) that can accommodate for variety in recommended foods. We then assess the impact of including this additional variety criterion in recommendation system performance, where we show that the incorporation of variety improves the algorithm's evaluation metrics.

Comparison of Ips cembrae (Coleoptera: Curculionidae) Capture Methods: Small Trap Trees Caught the Most Beetles

Ips cembrae is the most important bark beetle pest of larches and has had several local outbreaks in recent decades in Europe. In this study, we compared the numbers of I. cembrae captured by pyramid-trap piles, trap trees, pheromone traps, and poisoned and baited tripods. We also studied how the properties of trap trees and trap logs (volume, sun exposure, and position relative to the ground once deployed) affected the trapping of I. cembrae. We found that both sexes avoided infestation at the bottom of the logs and more than 15 times the number of beetles were captured by traditional trap trees than by pheromone traps or baited and insecticide-treated tripods. The number of I. cembrae per trap tree did not decrease with trap volume; therefore, it is appropriate to use traps of small dimensions. Baited tripods, pyramid-trap piles, and pheromone traps could be useful for detection of the beginning of flight activity, but trap trees are the most useful for reducing I. cembrae numbers.

New AVO Attributes and Their Applications for Facies and Hydrocarbon Prediction: A Case Study from the Northern Malay Basin

Amplitude versus offset (AVO) analysis integration to well log analysis is considered one of the advanced techniques to improve the understanding of facies and fluid analysis. Generating AVO attributes are one solution to give an accurate result in facies and fluid characterization. This study is focused on a field of Northern Malay basin, which is associated with a fluvial-deltaic environment, where this system has high heterogeneity, whether it is vertically or horizontally. This research is aimed to demonstrate an application of the scale of quality factor of P-wave (SQp) and the scale of quality factor of S-wave (SQs) AVO attributes for facies and fluid types separation in field scale. These methods are supposed to be more sensitive to predict the hydrocarbons and give less ambiguity. SQp and SQs are the new AVO attributes, which derived from AVO analysis and created according to the intercept product (A) and gradient (B). These new attributes have also been compared to the common method, which is the Scaled Poisson’s Ratio attribute. By comparing with the Scaled Poisson’s Ratio attribute, SQp and SQs attributes are more accurate in determining facies and hydrocarbon. SQp and SQs AVO attributes are integrated with well log data and considered as the best technique to determine facies and fluid distribution. They are interpreted by using angle-stack seismic data based on amplitude contrast on interfaces. Well log data, e.g., density and sonic logs, are used to generate synthetic seismogram and well tie requirements. The volume of shale, volume of coal, porosity, and water saturation logs are used to identify facies and fluid in well log scale. This analysis includes AVO gradient analysis and AVO cross plot to identify the fluid class. Gassmann’s fluid substitution modeling is also generated in the well logs and AVO synthetics for in situ, pure brine, and pure gas cases. The application of the SQp and SQs attributes successfully interpreted facies and fluids distributions in the Northern Malay Basin.

Comparison of the Accuracy of Methods for Calculating the Volume of Standing European Beech Trees

The paper presents results of the analysis of the accuracy of calculating the volume of standing trees, calculated according to the method used in forestry practice, based on the principle of full calipering of all marked trees with the following calculation of mean height and standing volume according to the method of uniform volume curves. This volume was compared with the exact method for calculating the volume of actual removals including small wood in the beech stands of Little Carpathians in the territory of Lesy Slovenskej republiky, š.p. (Forests of the Slovak Republic, State Enterprise), branch establishment in Smolenice. The values of marked felling (standing trees) and the values of removals including logging residues left on the site will be compared and the difference expressed in percent. The difference between the values in percent is fitted with the accuracy of calculated standing volume (marked logging) established by the author of the method for calculating uniform volume curves, i.e. Halaj. A model curve is chosen by means of the directly detected value of mean stand quantity (mean height, mean diameter, age, site class etc.). The system of uniform volume curves links up with these quantities and gives volumes of individual trees for all diameter classes and corresponding heights. The method of uniform volume curves is used in Slovakia to calculate the volume of marked logging. Results of the analysis show that the volume of standing trees calculated according to the method of uniform volume curves is in reality underestimated by about 5% as compared with the actual volume of processed wood mass including logging residues left on the site. Thus, the calculation inaccuracy in forestry practice is exceeded by the above mentioned 5% as compared with the permitted deviation established through the method of uniform volume curves. Solution of this problem is a proposal submitted to the National Forest Centre in Zvolen for the elaboration of volume tables for the new ecotype of European beech.

HitAnomaly: Hierarchical Transformers for Anomaly Detection in System Log

Enterprise systems often produce a large volume of logs to record runtime status and events. Anomaly detection from system logs is crucial for service management and system maintenance. Most existing log-based anomaly detection methods use log event indexes parsed from log data to detect anomalies. Those methods cannot handle unseen log templates and lead to inaccurate anomaly detection. Some recent studies focused on the semantics of log templates but ignored the information of parameter values. Therefore, their approaches failed to address the abnormal logs caused by parameter values. In this article, we propose HitAnomaly, a log-based anomaly detection model utilizing a hierarchical transformer structure to model both log template sequences and parameter values. We designed a log sequence encoder and a parameter value encoder to obtain their representations correspondingly. We then use an attention mechanism as our final classification model. In this way, HitAnomaly is able to capture the semantic information in both log template sequence and parameter values and handle various types of anomalies. We evaluated our proposed method on three log datasets. Our experimental results demonstrate that HitAnomaly has outperformed other existing log-based anomaly detection methods. We also assess the robustness of our proposed model on unstable log data.

Performance Comparison for Two Cable Extraction Machines in a Larix kaempferi (Lamb.) Carr. Plantation

Forests in Korea are mainly located in steep mountainous areas, where small-shovel-based extraction technology is widely used, with the level of mechanization undoubtedly low due to financial limitations. On this steep terrain, a better approach may be to use cable yarders, which can offer high revenues through cable-based extraction. Therefore, improving the efficiency of cable yarding activities in good-quality timber forests is necessary. The main objectives of this study were to (1) evaluate the productivity and cost of a cable yarder operation for tree-length clearcut treatment of a Larix kaempferi (Lamb.) Carr. stand and (2) compare the productivity efficiency of two yarder (K301-4 and HAM300) types. The productivity rates of the K301-4 ranged from 10.2 to 12.5 m3/productive machine hours, with corresponding costs of US $12.6–15.4 /m3. The productivity of the HAM300 was 26% lower than that of the K301-4 for a 30% lower cycle log volume while yarding and a comparable lateral distance. This study provides insights to support production and management decisions in the forest supply chain associated with planning cable-yarding operations.

Stocks of Carbon in Logs and Timber Products from Forest Management in the Southwestern Amazon

Amazon forest management plans have a variety of effects on carbon emissions, both positive and negative. All of these effects need to be quantified to assess the role of this land use in climate change. Here, we contribute to this effort by evaluating the carbon stocks in logs and timber products from an area under forest management in the southeastern portion of Acre State, Brazil. One hundred and thirty-six trees of 12 species had DBH ranging from 50.9 cm to 149.9 cm. Basic wood density ranged from 0.3 cm−3 to 0.8 g cm−3 with an average of 0.6 g cm−3. The logs had a total volume of 925.2 m3, biomass of 564 Mg, and carbon stock of 484.2 MgC. The average volumetric yield coefficient (VYC) was 52.3% and the carbon yield coefficient (CYC) was 53.2% for logs of the 12 species. The sawn-wood products had a total volume of 484.2 m3, biomass of 302.6 Mg, and carbon stock of 149.9 MgC. Contributions of the different species to the total carbon stored in sawn-wood products ranged from 2.2% to 21.0%. Means and standard deviations for carbon transferred to sawn-wood products per-species from the 1252.8-ha harvested area ranged from 0.4 ± 1.1 MgC to 2.9 ± 0.4 MgC, with the largest percentages of the total carbon stored in wood products being from Dipteryx odorata (21.0%), Apuleia leiocarpa (18.7%), and Eschweilera grandiflora (11.7%). A total of 44,783 pieces of sawn lumber (such as rafters, planks, boards, battens, beams, and small beams) was obtained from logs derived from these trees. Lumber production was highest for boards (54.6% of volume, 47.4% of carbon) and lowest for small beams (1.9% of volume, 2.3% of carbon). The conversion factor for transforming log volume into carbon stored in sawn-wood products was 16.2%. Our results also show that species that retain low amounts of carbon should be allowed to remain in the forest, thereby avoiding low sawmill yield (and consequent generation of waste) and allowing these trees to continue fulfilling environmental functions.

Reviewing productivity studies of skidders working in coniferous forests and plantations

Skidding is an important element of harvesting operations, which contributes to the extraction of wood. A skidder can be used in different types of harvesting operations, such as thinning, clear fell, native forest thinning or salvage work. The main goal of this article was to review the available stud-ies on productivity of skidding operations in coniferous forests/ plantations. Information on skid-der productivity was collected from publications and then was classified in three regions, including North America, Europe and the Southern Hemisphere. The parameters affecting machine productivity included machine type/ size, tree volume/ log volume/ load volume, average skidding distance and slope of the ground for each reported productivity. The average productivity reported in the published reports ranged from 9.3 m3/PMH to 78.0 m3/PMH. Detailed information and conclusions collected from various studies can be of use to forest academic and industry users to gain knowledge about vari-ations of skidder productivity in different regions and site/ operation conditions, which can be helpful for predicting, controlling and improving current levels of productivity. 

Sampling business process event logs using graph‐based ranking model

SummaryModern information systems are continuously collecting and storing large volumes of business process event logs. The analysis of event logs can provide valuable insights for business process re‐engineering and enhancement. Process discovery, as one of the most challenging event log analysis techniques, aims to discover a business process model from an event log. Many process discovery approaches have been proposed in the past two decades, however, most of them suffer from efficiency problem when dealing with large‐scale event logs. Motivated by PageRank, we propose LogRank, a graph‐based ranking model, for event log sampling in this paper. The LogRank is capable of sampling a large‐scale event log to a smaller size that can be efficiently handled by existing discovery approaches. To support real‐life applications, we instantiate the LogRank model for two typical types of event logs, that is, simple event logs and lifecycle event logs. To quantify the quality of a sample log with respect to the original one, we introduce a general evaluation framework that can be instantiated for different quality metrics. The proposed sampling approach has been implemented in the open‐source process mining toolkit ProM. By experiments with both synthetic and real‐life event logs, we demonstrate that the proposed LogRank‐based sampling approach provides an effective means to improve process discovery efficiency as well as guaranteeing high quality of discovered models.

Wood Science Characteristics of Timber from Pine Deadwood Trees (<i>Pinus sylvestris L.</i>)

During the last decade, the drying up of medieval, arriving and mature stands of pine (Pinus sylvestris L.), which is the dominant breed in domestic forests (33% of the total area, about 45% of the volume of logging), acquired a threatening scale in Ukraine. Dated 2019, the total area of arable crops has reached 413 thousand hectares (of which pines - 222 thousand hectares), or about 4% of the area of the forest fund of Ukraine. One of the main and most effective means of preventing the widespread pathological processes in forests, which cause their drying, is sanitary and other felling of forest care. As a result, a significant amount of untreated low-quality timber, which is classified as deadwood is formed. Timber from deadwood trees is characterized by features such as mycological and insecticidal lesions, cracks, etc., the impact of which on the strength and operational characteristics of timber products has not yet been studied. The interest of using of the wood in the construction as a material from renewable eco-friendly raw materials has traditionally increased. One of the possible uses pine deadwood trees may be the production of structural lumber. The lack of timber characteristics of such timber makes it impossible to predict its behavior during processing and operation and, accordingly, complicates the determination of directions of its rational use, especially in structures. The significantly lower cost of timber from pine deadwood trees, compared with timber from non-attenuated drying out pine trees, is an attractive feature of such raw materials from an economic aspect.

Solar Cycles in Salvage Logging: National Data from the Czech Republic Confirm Significant Correlation

Forest ecosystems in Europe undergo cyclic fluctuations with alternating periods of forest prosperity and disturbances. Forest disturbances are caused by large-scale calamities (climate-induced and unforeseen events) resulting in an increased volume of salvage logging. In recent decades, climate change (warming, long-term droughts, more frequent storms, bark beetle outbreaks) has contributed to an increased frequency of salvage logging. However, until now, it has not been revealed what triggers national-scale forest calamities. All of the above-mentioned natural disturbances are connected to solar activity, which is the driver of climate change. This research relates the total volume of harvested timber and salvage logging to the climate and cosmic factors in the Czech Republic, Central Europe. Data of total and salvage logging are compared with air temperatures, precipitation, extreme climatic events, sunspot areas, and cosmic ray intensities. The results document a significant effect of average annual temperatures on the total and salvage logging for the entire period of observations since 1961. A significant correlation of salvage logging to the sunspot area and cosmic ray intensity was observed. The link between salvage logging and sunspots and cosmic ray intensity is supported by spectral analysis in which a significant 11-year cycle was observed since 1973. The results also show an increasing significant effect of sunspots and cosmic ray intensity on logging in recent years in connection with synergism of extreme climate events and the subsequent bark beetle outbreaks. Space and cosmic effects are factors that substantially influence forest ecosystems. Therefore, this paper provides new knowledge about, and possible predictions of, the forest response under climate change.

PENINGKATAN PRODUKTIVITAS PEMANENAN KAYU DI HUTAN ALAM MELALUI KESESUAIAN JUMLAH PEKERJA

Timber harvesting has a significent role for timber production. In natural forest, the timber production may be increased in line with the efectiveness of forest harvesting. The number of worker in harvesting many contribute to improve natural forest harvesting. Research conducted on forest concession in north borneo the primary and secondary date the direct information based in measurement of log volume and the member of working hours in every activity step of harvesting. While the secondary information derived from the quisionare delivered to field manager apply multiple regressing is used to analysa the relation amongs member of worker used, produktivity in harvesting and production cost. the research finding showed that 1) the number of worker in following activities of cutting, skidding handling and log delivering are about 2, 9, 3 and 9 consecutively; 2) the average of productivity and harvesting cost for the activities of cutting, skidding handling and log delivery are about 38.308 m3/hour, 15.070 m/hour, 67.5 m3/hour, 8.33 m3/hour, while the cost arising for the activities are Rp13.897,44/m3, Rp.48.883,45/m3, Rp. 11.765,6/m3 and Rp. 74.039/m ; 3) the more harvesting workers are not directly increase the logging productivity. it many need some trainings to improved their capabilities; 4) the regression model among the member of worker and productivity of harvesting and production cost is Y=15,346 + 0,326 X1 +3,685X2

Productivity Analysis of Front-end Loader in Timber Harvesting

In this study, the productivity of front-end loader (Liebherr L 514 Stereo), which is one of the most used mechanized harvesting equipment in the production of forest products, was analyzed using time-study method. Factors influencing loader productivity were also evaluated by statistical analysis. Time measurements were carried out during forest harvesting operations in Topçam Forest Enterprise Chief in the city of Giresun. The results indicated that the most time-consuming stage of the loading operation was moving loaded to the logging truck, followed by moving unloaded to the side of the logs. According to the results, the average productivity of the loader was 34.27 m3/hr. Correlation test results showed that there was a positive correlation between productivity and log diameter and log volume, while there was no significant relationship between productivity and log length. The regression model developed with respect to the loader's productivity and specified log parameters (i.e. log diameter and log volume) was found to be significant and adequately explained the productivity of the loader. It was found that there was a significant relation between loader productivity and diameter classes and volume classes. It was also found that loader productivity increased as log diameter and log volume increases.

Feasibility of locating biomass-to-bioenergy conversion facilities using spatial information technologies: A case study on forest biomass in Queensland, Australia

There are large volumes of forest biomass available, distributed over extensive geographic areas in Australia. However, it is largely a low-value resource sensitive to high procurement costs. Transportation cost is typically the biggest factor in the cost of a forest biomass supply chain and is a critical factor in the planning of profitable bioenergy conversion facilities. This study presents an example of using geographical information systems (GIS) to 1) evaluate the feasibility of setting up new bioenergy facilities, 2) evaluate the location of existing bioenergy facilities, and 3) optimize the locations of facilities in Queensland, Australia. This study uses forest biomass availability estimated from 5-year harvest log volumes. The log volumes are refined to biomass energy (PJ) using a model that considers forest type, sustainable retention of residues on sites, residue proportions of total above-ground biomass and energy conversion factors. The strategic locations of bioenergy conversion facilities are defined using cluster and outlier analysis of biomass energy distribution and transportation distance using the local index of spatial autocorrelation (LISA) in a GIS environment. The tactical selection of bioenergy conversion facilities is then established based on the required number of facilities and capacity, together with the maximal distance for transporting the forest biomass. This study uses Queensland, Australia as the study area to demonstrate the effectiveness of modern GIS tools to achieve more scientific planning in bioenergy conversion facility networks and supply chain.

Data-Driven Study on the Sustainable Log Movements: Impact of Rail Car Fleet Size on Freight Storage and Car Idling

Rail car availability and the challenges associated with the seasonal dynamics of log movements have received growing attentions in the Lake Superior region of the US, as a portion of rail car fleet is close to reaching the end of its service life. This paper proposes a data-driven study on the rail car peaking issue to explore the fleet of rail cars dedicated to being used for log movements in the region, and to evaluate how the number of cars affects both the storage need at the sidings and the time the cars are idled. This study is based on the actual log scale data collected from a group of forest companies in cooperation with the Lake State Shippers Association (LSSA). The results of our analysis revealed that moving the current log volumes in the region would require approximately 400–600 dedicated and shared log cars in ideal conditions, depending on the specific month. While the higher fleet size could move the logs as they arrive to the siding, the lower end would nearly eliminate the idling of rail cars and enable stable volumes throughout the year. However, this would require short-term storage and additional handling of logs at the siding, both elements that increase the costs for shippers. Another interesting observation was the fact that the reduction of a single day in the loading/unloading process (2.5 to 1.5 days) would eliminate almost 100 cars (20%) of the fleet without reduction in throughput.

Estimation of Over- and Under-Bark Volume of Scots Pine Timber Produced by Harvesters

Harvesters produce one third of timber in Czechia. The aim of this study was to analyze the over- and under-bark volume estimates of Scots pine (Pinus sylvestris L.) timber produced by a mid-performance harvester. The data were collected between March 2017 and June 2018. In total, 4661 stems cut into 29,834 logs were analyzed. For volume estimation, StanForD offers several price categories using various algorithms. Three of these price categories are relevant for Czech forestry—M3s, M3toDE, and M3miDE. The M3s price category is based on the estimation of partial volumes of 10 cm long sections, which are summed. Therefore, this price category represents the volume estimation closest to the true volume. By comparison, the M3toDE and M3miDE price categories use the same algorithm for volume estimation, which is based on the Huber formula using a midspan diameter rounded down to the nearest whole centimeter. The M3toDE price category underestimated the over-bark volume by 6.48% compared to the reference price category M3s. The mean log volume estimated through the M3s price category was significantly higher than the M3toDE volume both in individual grades and without grading. We found significant differences between under-bark volume estimates by the diameter band bark deduction method (DBM) and the parametric linear bark deduction method (PLM) used in harvester’s systems according to the Guidelines for Electronic Scaling of Timber for Harvesters in Czechia (GEH) for Scots pine butt logs with rough bark, and also for other logs with normal bark thickness. To obtain under-bark volume estimates of Scots pine timber that are comparable with the Guidelines for Timber Scaling in Czechia (GTS) using the parametric nonlinear bark deduction method (PNM), we recommend using the algorithm of the M3toDE price category, with double bark thickness determined by the diameter band bark deduction method.

Influence of planting density and thinning on timber productivity and resistance to wind damage in Japanese larch (Larix kaempferi) forests

In recent years, forest damage caused by typhoons has occurred frequently in Hokkaido, northern Japan. According to predictive reports, a typhoon's intensity increases and it then maintains its intensity as it moves north. The relationship between this prediction and forest damage is not clear, but the importance of dealing with forest damage is increasing. Therefore, to consider the countermeasures in forest management, we evaluated the influence of planting density and thinning on timber yield and resistance to wind damage in Japanese larch (Larix kaempferi), which is one of the main tree species used for afforestation in northern Japan. In this study, the following three management types were investigated: sparse (ST: relative yield index < 0.8), middle (MT: relative yield index < 0.9), and dense (DT: unthinned). To assess resistance to wind damage, the critical wind speed required to overturn and break the trunks of trees was calculated using a mechanistic model. Furthermore, timber volumes were estimated from a stand age of 10–50 years using the Yield Prediction System. The management type and planting density (1500–2500 trees ha−1) affected resistance to wind damage. Scenarios with ST and low planting density (1500 trees ha−1) showed a high resistance. In contrast, total timber volumes for scenarios varied from approximately 440 to 630 m3 depending on the site index (SI = 22, 25, and 28) at a stand age of 50 years. The merchantable log volume of the final cutting varied from approximately 210 to 470 m3 depending on the management type, planting density, and SI. There was a negative linear correlation between the log volume and resistance to wind damage. Therefore, it is important to balance both the decreased wind damage risk and higher timber yield or to prioritize them.

Properties of Oak Roundwood with and without Frost Cracks

The aim of this study was to examine certain properties of sessile oak wood (Quercus petraea (Matt.) Liebl.) with frost cracks, such as density (ρ), modulus of rupture (MOR), modulus of elasticity (MOE), and compressive strength in all anatomical directions and to compare it with control trees without frost cracks. Oak with frost cracks had a higher wood density (ρ = 765 kg × m−3) than the control (ρ = 650 kg × m−3). However, despite its lower density, the control oak was characterized by noticeably better mechanical parameters, with the exception of the compressive strength in radial and tangential directions. Differences in mechanical parameters reached up to 26%. The tests were performed on wood taken from trees with frost cracks that formed over 10 years to several decades ago. Frost cracks can render wood vulnerable to fungi growth, which leads to rotting and discoloration. Differences in strength were found on samples with no visible signs of decay, as they were cut at a distance from the crack. Nonetheless, the observed differences in strength allowed us to conclude that the shreds of fungi, as well as decay, may occur in the entire volume of the frost-damaged log. Such wood is, therefore, of a lower quality than that made of logs without any frost damage. Trees with frost cracks should be progressively be felled during the periodic intermediate cutting, as their wood quality may systematically deteriorate over the years.