Log Position Research Articles

Decay dynamics of Abies alba and Picea abies deadwood in relation to environmental conditions

In this study we analysed a dataset of 8661 logs of silver fir (Abies alba Mill.) and Norway spruce (Picea abies L., Karst) in mixed fir-spruce-beech stands in primeval and natural forests in four sites separated into the two macroclimatic categories according to mean annual temperature (“cold” and “warmer”) and according to mean annual precipitation (“mesic” and “humid”). We used “Bayesian Survival Trajectory Analysis” on a more than 40-year long time series (1972–2015), focusing on differences in the residence time of deadwood in different macroclimatic categories and two DBH classes. We also evaluated two qualitative characteristics of the downed logs: mortality mode and log position during decomposition. We calculated residence time and the time needed to reach the advanced decay stage. Our analyses confirmed the influence temperature and precipitation on modelled residence time. The residence time for silver fir logs in the DBH class 55+ cm in the “cold” site was 106 years, while in the “warmer” sites was 78 years. The residence time in the “mesic” site was 57 years, while in the “humid” sites was 90 years. It took 81 years for Norway spruce logs in the DBH class 55+ cm to completely decompose in the “cold” site. Suspended logs 11 took years longer to decay than those in contact with the ground. The modelled residence time of logs on wet sites was the same as that of logs at sites unaffected by water. These results can be utilised in biodiversity oriented forest management, as well as in modelling future amounts of deadwood. In order to maintain the continuous presence of silver fir and Norway spruce deadwood for those organisms that depend on it, it is necessary to supply deadwood at least once every 25–40 years (depending on climatic category and DBH class). During this time, approximately 50% of logs become completely decomposed and 50% remain in the last decay stage.

Automated recognition of rear seat occupants' head position using Kinect™ 3D point cloud

IntroductionChild occupant safety in motor-vehicle crashes is evaluated using Anthropomorphic Test Devices (ATD) seated in optimal positions. However, child occupants often assume suboptimal positions during real-world driving trips. Head impact to the seat back has been identified as one important injury causation scenario for seat belt restrained, head-injured children (Bohman et al., 2011). There is therefore a need to understand the interaction of children with the Child Restraint System to optimize protection. MethodNaturalistic driving studies (NDS) will improve understanding of out-of-position (OOP) trends. To quantify OOP positions, an NDS was conducted. Families used a study vehicle for two weeks during their everyday driving trips. The positions of rear-seated child occupants, representing 22 families, were evaluated. The study vehicle – instrumented with data acquisition systems, including Microsoft Kinect™ V1 – recorded rear seat occupants in 1120 driving 26 trips. Three novel analytical methods were used to analyze data. To assess skeletal tracking accuracy, analysts recorded occurrences where Kinect™ exhibited invalid head recognition among a randomly-selected subset (81 trips). Errors included incorrect target detection (e.g., vehicle headrest) or environmental interference (e.g., sunlight). When head data was present, Kinect™ was correct 41% of the time; two other algorithms – filtering for extreme motion, and background subtraction/head-based depth detection are described in this paper and preliminary results are presented. Accuracy estimates were not possible because of their experimental nature and the difficulty to use a ground truth for this large database. This NDS tested methods to quantify the frequency and magnitude of head positions for rear-seated child occupants utilizing Kinect™ motion-tracking. ResultsThis study's results informed recent ATD sled tests that replicated observed positions (most common and most extreme), and assessed the validity of child occupant protection on these typical CRS uses. SummaryOptimal protection in vehicles requires an understanding of how child occupants use the rear seat space. This study explored the feasibility of using Kinect™ to log positions of rear seated child occupants. Initial analysis used the Kinect™ system’s skeleton recognition and two novel analytical algorithms to log head location. Practical applicationsThis research will lead to further analysis leveraging Kinect™ raw data – and other NDS data – to quantify the frequency/magnitude of OOP situations, ATD sled tests that replicate observed positions, and advances in the design and testing of child occupant protection technology.

Acoustic evaluation of loblolly pine tree- and lumber-length logs allows for segregation of lumber modulus of elasticity, not for modulus of rupture

Loblolly pine ( Pinus taeda ) logs can be evaluated using acoustic velocity whereby threshold acoustic velocity values can be set to ensure lumber meets specified mechanical property design values for modulus of elasticity. There is a need to better sort logs according to lumber quality for improved decision making and wood utilization because merchantable logs are being harvested from different stand types including natural forests, conventional plantations, and intensively managed plantations, all with differences in rotation ages, growth rates, and wood quality traits. This study aimed to link tree- and lumber-length log acoustic velocity with the resulting lumber properties as tested in static bending from five intensively managed loblolly pine stands in the Atlantic Coastal Plain of Georgia. Acoustic velocity was measured using the resonance-based approach on 87 tree-length logs and 244 lumber-length logs. The logs were then processed into 797 pieces of 38 mm by 89 mm (2×4), 140 mm (2×6), 184 mm (2×8), and 235 mm (2×10) dimension lumber, dried, and tested in static bending. Mean MOE of the lumber had moderate relationships with acoustic velocity of the logs (R 2 = 0.49) whereas MOR and acoustic velocity did not have a strong relationship (R 2 = 0.20). Accounting for log position increased the performance of the mean lumber MOE model (R 2 = 0.62) which was further increased by adding green density and small-end diameter (R 2 = 0.67). Utilization of acoustics was effective for segregating logs based on lumber modulus of elasticity and did not depend on knowing tree or stand information such as age, site quality, and silviculture history. Acoustic velocity evaluation of tree- and lumber-length logs could be employed to segregate logs within the supply chain to ensure that lumber would meet specified design values.

Vertical distribution of saproxylic beetles within snag trunks retained in plantation forests

Retention of snags (standing dead trees) is considered to have important effects on saproxylic species conservation in plantation forests because snags would provide vertically stratified deadwood habitats. However, the vertical distribution of saproxylic insects within snag trunks is still unclear. We felled 33 naturally occurring snags of Todo fir Abies sachalinensis in plantation forests and extracted insects from 99 logs sampled from three vertical positions of the snag trunks (basal stem: 5 m). The mean number of species that emerged from a single log was only 2.69, but we identified 51 morphospecies of saproxylic beetles in total. The total number of species that emerged from the basal stem (34 spp.) was greater than those that emerged from the lower trunk (25 spp.) or the upper trunk (30 spp.). However, rarefaction-extrapolation analysis did not demonstrate a significant difference in species richness among the log positions. Beetle assemblages were separated into two groups by constrained correspondence analysis; one group emerged only from lower and upper trunk logs, while another emerged mainly from basal stem logs. Additionally, vertical position had a significant effect on the distribution of the five main species. Our results show that beetle assemblages within snags in the plantation forests were highly variable, and retaining a sufficient number of high stumps may be important for saproxylic beetle conservation in plantation forests. We propose ‘retention thinning’ as an appropriate method to combine efficient timber production with biodiversity conservation in plantation forests.

How do environmental conditions affect the deadwood decomposition of European beech (Fagus sylvatica L.)?

European beech is one of the most important European trees, not only because of its expected role in the face of climate change, but also as a frequent species in forest reserves, national parks and the NATURA 2000 network. For such areas, naturalness and biodiversity conservation are significant issues, in which the presence of deadwood plays an important role. To manage deadwood in forests, one needs to know how the residence time of coarse woody debris is influenced by the environment. In this study, we analysed a dataset of 4260 logs from beech-dominated primeval and natural forest reserves in three climatically different regions (cold-dry, warm-dry and warm-humid region), working with a time series of more than 40years (1972–2015). With the help of Bayesian Survival Trajectory Analysis, we examined differences between residence times in the three regions and in three DBH classes. In addition, we analysed qualitative characteristics of fallen logs – the mortality mode and the position of logs during decomposition – and calculated their total decomposition time and time to reach an advanced decay stage. The analyses confirmed the significant impact of macroclimate on residence time. In the cold-dry region the diameter classes 10–24cm (small-sized logs) and 25–54cm (medium-sized logs) had the longest residence time (38and48years, respectively). In the warm-dry region with a favourable composition of fungal communities, the diameter class 55+ cm (large-sized logs) logs had the shortest residence time (43years). The rates of decomposition of beech logs in contact with the ground or suspended logs were significantly different in all three regions, with logs lying on the ground decomposing 9–15years sooner. These results can be used in retention forestry. If the continuity of the deadwood environment is to be preserved, it is necessary to ensure a “supply” of dead stems (offering differing habitats) at least once every 24–35years. During this period, 50% of logs decay completely and the other 50% of logs progress to an advanced decay stage.

The Effect of Log Position Accuracy on the Volume Yield in Sawmilling of Tropical Hardwood

This study investigated the effect of the positioning of the log before sawing on the volume yield of sawn timber from tropical hardwood species. Three positioning parameters were studied, the offset, skew, and rotation, combined with two sawing patterns of cant-sawing and through-and-through sawing. A database consisting of two tropical hardwood species with very different outer shapes, jambirre (Millettia stuhllmannii Taub.) and umbila (Pterocarpus angolensis DC.), was used to simulate the sawing process. The result of the simulation revealed that, according to the combined effect of offset, skew, and rotation positioning, the positioning of the log before sawing is extremely important to achieve a high volume yield of sawn timber. The positioning parameter that has the highest effect on the volume yield is the rotation, and the variation in the volume yield associated with a deviation in the positioning can reduce the volume yield of sawn timber by between 7.7% and 12.5%.

Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter

ABSTRACTFifteen stems of jack pine (Pinus banksiana Lamb.) of 3 commercial thinned plots (control, moderate, and intensive thinning) and 15 stems of black spruce (Picea mariana (Mill.) B.S.P), both coming from the Abitibi-Témiscamingue region – Canada, were cross-cut into three 2.4 m length sections: bottom, middle, and top logs. Logs were processed with a chipper-canter at three cutting widths (12.7, 19.1, and 25.4 mm), producing chips and a three-faced cant. The middle section of the cant was used to evaluate surface quality across the grain on each face. Roughness and waviness parameters and depth of torn grain were recorded. Knot characteristics were assessed in the three cant faces. Poorer surface quality was found in the lower part compared to the upper part of the cant for both species. At larger cutting widths, jack pine logs coming from a natural stand showed lower surface quality compared to logs from thinned stands. Black spruce waviness increased with the cutting width and stem height. These results were attributed to the increase of forces and vibration when cutting at larger cutting widths, which was worsened by the presence of bigger, more numerous knots at the control plot and in the top logs. Black spruce had deeper torn grain compared to jack pine. Their differences in knot characteristics resulted in a maximum torn grain depth favored by the presence of more knots rather than by bigger knot size. Other knot characteristics, such as the position of the knots in the cant face, the insertion angle of the branch and the distribution of the knots around the log, should be studied to better understand the relationship between torn grain formation and knottiness.

Effects of log position in the stem and commercial thinning on jack pine chip dimensions produced by a chipper-canter

Fifteen stems of jack pine (Pinus banksiana Lamb.) coming from three commercial thinned (CT) plots (control, moderate, and intensive thinning) in the Abitibi-Temiscamingue region, Canada, were cross-cut into three 2.4 m length sections: bottom, middle, and top logs. Logs were processed with a chipper-canter at three cutting widths (CW 12.7, 19.1, and 25.4 mm), producing chips and a three faced cant. Chips were assessed by thickness, width, and length. Knot characteristics [total knot number (TKN) and area (TKA)] were assessed in the three cant faces. Growth ring attributes [earlywood density, latewood density (LWD), ring density (RD), earlywood proportion (EWP), ring width, and rings per mm], mechanical properties (shear, splitting, modulus of elasticity and modulus of rupture in bending), and basic density were evaluated on samples obtained within each CW area. The weighted mean chip thickness (WCT) was significantly affected by the log position in the stem (LPS) and CW. WCT increased as CW increased. Jack pine produce thicker chips than black spruce, when processed under the same cutting parameters. Thickness of chips coming from bottom and middle logs was similar due to a greater taper of the bottom log, which slightly increased this dimension. Thickest chips were produced in the top log due to a higher TKA and TKN towards the top of the stem. Multiple linear regressions showed that TKA, CW, and RD were significant predictors of WCT. Chip size distributions were significantly affected by the CT, LPS, and CW. Thinned stands logs appeared to produce smaller chips than natural stand logs. Moreover, chip thickness distribution was affected primarily by TKA and EWP, while the width and length distribution was mainly affected by EWP, LWD, and TKN. Chip size in jack pine is to some degree determined by knot attributes, growth ring characteristics, and wood density of the raw material. These results suggest the potential advantage of sorting logs prior to chipping, either by species, LPS and/or provenance (thinned or natural stands).

Lithostratigraphy of Masol paleonto-archeological localities in the Quranwala zone, 2.6 Ma, Northwestern India

Since 2008, the ‘Siwaliks’ Indo-French Program of Research has surveyed the north of the Chandigarh anticline (Siwalik Frontal Range [SFR], northwestern India) in the Masol inlier known for its Plio-Pleistocene transitional fauna (2.6Ma). Twelve paleonto-archeological localities have been identified in the Quranwala fossiliferous zone, where many fossils and stone tools are lying on the outcrops or included in the erosional debris of the same layers. Cut-marks on a few fossil bones attest to the presence of hominins. This paper presents the detailed lithostratigraphy of these paleontological and archeological localities and their position in the stratigraphic log of the Quranwala zone reconstructed for the Masol anticline.

Deadwood residence time in alluvial hardwood temperate forests – A key aspect of biodiversity conservation

There are hundreds of scientific papers dealing with the issues of biodiversity and extinction debt in temperate forests, both of which are partly related to the absence of deadwood. Some studies have derived habitat thresholds for deadwood (according to species, size, spatial distribution) as baselines for management recommendations. But a majority of studies have one important knowledge gap – how long does it take for deadwood to decompose? To derive the residence time of deadwood, we used a 40-year time series of 4 censuses in European lowland hardwood temperate forests. The deadwood residence of 2252 logs of 5 main tree species was calculated using Bayesian Survival Trajectory Analysis. Pedunculate oak (Quercus robur) had the longest residence time, with the largest logs decomposing for an average of 62years. Next was narrow-leaved ash (Fraxinus angustifolia) with a residence time of about 42years. Field maple (Acer campestre) and hornbeam (Carpinus betulus) had a similar residence time – with the largest logs averaging 37–39years. Elm (Ulmus sp.) had the fastest decomposition of large-sized logs – estimated at 24years. Generally, small-sized logs of all investigated species decomposed quickly. Conversely, large-sized logs of hornbeam and ash decomposed as quickly as their intermediate-sized logs. Large-sized logs of elm decayed even faster than intermediate-sized logs. An analysis of the position of field maple logs during decomposition showed that those decomposing in the air or in water decomposed slower than logs “on the ground”, with a half-life of 40years (compared to 28years on the ground) and a residence time of 54years (44years on the ground). Our results suggest that the management of deadwood should focus on (i) leaving the largest logs, which took the longest time to reach advanced decay stages, and (ii) a diversified approach regarding the individual residence time of different tree species.

Optimizing sawing of boards for furniture production using CT log scanning

The inherent variability of wood material together with sub-optimization in production processes means that a lot of potential value is lost. Computed tomography scanning together with simulation models of the production processes could remedy this, and ensure optimization of the entire production process. Therefore, the purpose of this study was to investigate if such methods can be used to optimize the sawing position of logs in a production process including further processing, in this case crosscutting to make a furniture product with strict quality requirements on dead knots. This was done on 47 Scots pine (Pinus sylvestris L.) logs. The results show a potential yield increase of more than 11 % points in the crosscutting operation and more than 4 % points when viewing the process as a whole, compared to sawing the logs horns down and centered.

Dead wood characteristics influencing macrofungi species abundance and diversity in Caspian natural beech (Fagus orientalis Lipsky) forests

Aim of study: This study aimed to examine the dead wood inhabiting macrofungi communities occurring on dead beech and hornbeam trees in Caspian forests.Area of study: The Kheiroud forest in the north of Iran.Material and Methods: Data from 205 sampling dead tree were analyzed by means of Generalized Linear Models (GLM) to test the effects of decay stage, DBH, Length or Height on macrofungi diversity. Additionally, tree species, dead wood size, log position, decay stage were used as predictor factors for the number of sporocarps species (NSS) as a fungal species richness and diversity in each dead log using analysis of varianceMain results: The number of sporocarps species (NSS) varied in different dead wood size and decay classes. The different stages of decay and the different size classes of dead wood had significantly different species richness of macrofungi. Deadwood in the high-decayed stages contained the highest diversity of fungi. Most of fungi identified on both logs and snags belonged to Basidiomycetes and Ascomycetes. The highest value for richness and evenness indices calculated in large diameter dead wood in decay class III. The results indicated the size and decay class of dead wood describe the greatest variance of the model that means the highest number of sporocarps species inhabited on the large dead wood in advanced stage of decaying.Research highlights: Macrofungi diversity varied significantly across pieces of dead wood with downed logs, larger pieces, and wood in later stages of decay having the highest macrofungi diversity. Keywords: Caspian forest; coarse woody debris; down woody debris; Iran.

Influence of site, storage and steaming on Eucalyptus nitens log-end splitting

Log-end splitting is one of the single most important defects in veneer logs. We show that log-end splitting in the temperate plantation species Eucalyptus nitens varies across sites and within-tree log position and increases with time in storage. Log-end splitting is one of the single most important defects in veneer logs because it can substantially reduce the recovery of veneer sheets. Eucalyptus nitens can develop log-end splits, but factors affecting log-end splitting in this species are not well understood. The present study aims to describe the effect of log storage and steaming on the development of log-end splitting in logs from different plantations and log positions within the tree. The study was conducted on upper and lower logs from each of 41 trees from three 20–22-year-old Tasmanian E. nitens plantations. Log-end splitting was assessed immediately after felling, after transport and storage in a log-yard, and just before peeling. A pre-peeling steam treatment was applied to half the logs. Site had a significant effect on splitting, and upper logs split more than lower logs with storage. Splitting increased with tree diameter breast height (DBH), but this relationship varied with site. The most rapidly growing site had more splitting even after accounting for DBH. No significant effect of steaming was detected. Log-end splitting varied across sites and within-tree log position and increased with time in storage.

Energy and moisture losses during poplar and black locust logwood storage

The main problem with firewood production is the same as for other wood biofuels: storage. Usually, firewood is stored in logwood. The goal of this study was to determine the drying storage dynamics of logwood used for firewood production under the typical forest practice of southern Europe. Storage dynamics were evaluated for two different tree species (poplar and black locust) with logwood disposed in uncovered piles for a period of 180days (March–September). In this study, the effect of the diameter of logs and their position inside the pile on wood drying was evaluated. This evaluation was performed considering the main key drying physical parameters — temperature (T), moisture content (MC), heating value (HV) and dry matter (DM).The study found that initial values of key parameters were different for both forestry species, but at the end of the storage period the values were considered to be similar. No statistically significant differences were pointed out between logs with different diameter sizes and different positions in the pile. For this reason, drying logwood in uncovered piles can be considered a good storage method irrespective of forestry species, the diameter of logs and the position of logs in the pile.

Linking fungal communities to wood density loss after 12 years of log decay.

Changes in biodiversity might alter decomposition processes and, consequently, carbon and nutrient cycling. We examined fungal diversity and density loss in experimental Norway spruce logs after 12 years of decay in a hemiboreal forest. Between 28 and 50% of the original wood biomass remained, depending on the fungal community composition in the log, operational taxonomic unit (OTU) richness had only a minor effect on the log biomass. Although the communities were OTU rich (190-340 OTUs per log), the majority of OTUs were infrequent or rare; wood degradation therefore depended mostly on the most abundant OTUs and their decomposing abilities. The least decayed logs were characterized by continuous dominance of an earlier colonizer and by high within-log community diversity, which was significantly related to sample variables (position in log, density and moisture). In the most decayed logs, the earlier colonizers were generally replaced by white-rot species able to exploit the highly decomposed wood. The communities were relatively spatially uniform within whole logs, independent of the sample variables, whereas among-log diversity was high. Importance of fungal community composition in decomposition processes should be taken into account when studying and modeling carbon dynamics in forest ecosystems.

Effect of log position in European Larch (Larix decidua Mill.) tree on the technological properties of particleboard

The impact of log position in European Larch (Larix decidua Mill.) tree on the physical, mechanical, and surface properties of the particleboard was investigated. The logs were divided into five segments from the butt to the top of tree, which were 0–3 m, 3–6 m, 6–9 m, 9–12 m, and 12–15 m, respectively. The fiber length and wall thickness of the wood decreased with the increase in the tree height while the lumen diameter decreased. Similarly, the amount of cellulose and lignin decreased with the increase in tree height while the amount of hemicelluloses increased. The highest solubility values (hot and cold water, NaOH, and alcohol-benzene) and pH of the wood were found in the butt log, followed by the middle log, and top log, respectively. The physical (thickness swelling, water absorption) and mechanical properties (modulus of rupture, modulus of elasticity, and internal bond), and surface quality (surface roughness and contact angle) of the particleboards were negatively affected by increasing tree height. The best properties were obtained for the particleboards produced from the particles of the butt log (0–3 m).

Factors affecting log traits and green rotary-peeled veneer recovery from temperate eucalypt plantations

High levels of percentage green veneer recovery can be obtained from temperate eucalypt plantations. Recovery traits are affected by site and log position in the stem. Of the post-felling log traits studied, out-of-roundness was the best predictor of green recovery. Eucalyptus globulus and Eucalyptus nitens are widely planted in temperate regions of the globe but few studies of rotary peeling have been documented. This study aims to examine differences among sites and log positions in post-felling log traits and green veneer recovery traits and determine the extent to which log traits explain variation in recovery traits. Log traits and green rotary-peeled veneer recovery traits from six temperate eucalypt plantations were studied. Selected plantations encompassed different age, site productivity, silvicultural and species classes in south-eastern Australia. Differences in log and recovery traits among sites and between lower and upper logs were examined, as was the extent to which log traits explained variation in recovery traits. Differences among sites for percentage recovered green veneer were non-significant, despite significant differences for peelable billet volume, roundup loss, residual core diameter and all post-felling log traits: small end diameter, sweep, taper, out-of-roundness, end splitting and dynamic modulus of elasticity (MOEdyn). The lower log exhibited more sweep, taper and out-of-roundness but lower MOEdyn and less recovered green veneer. Out-of-roundness was the best predictor of recovery traits (R 2 = 13–21 %, P < 0.001). Recovered green veneer was high across all sites and log positions (78 % overall).

Value optimized log rotation for strength graded boards using computed tomography

A possible application for an industrial computed tomography scanner in a sawmill is finding an optimal rotational position of logs with respect to knots and outer shape. Since a computed tomography scanner is a great investment, it is important to investigate potential profitability of such an investment for different production strategies. The objective of this study was to investigate the potential value increase of the sawn timber of Norway spruce (Picea abies (L.) Karst.) by rotating logs to their optimum position prior to sawing compared with sawing all logs in horns down position. The production strategy evaluated by log breakdown simulation in this case study was to produce strength graded timber of the center boards, while the side boards were appearance graded. This case study showed an average value increase with respect to the value of center boards, side boards and chips of 11 %.

Log sawing position optimization using computed tomography scanning

When disjoining a log, several factors affect the value of the sawn timber. There are log features, such as outer shape, knots, rot, and so on. There are also sawing parameters, such as sawing pattern, log position, and so on. If full information about log features is available, sawing parameters can be adapted in order to maximize product value in sawmills. This is soon possible, since computed tomography (CT) scanners for the sawmill industry are being realized. This study aimed at investigating how CT data can be used to choose rotational position, parallel displacement, and skew of sawlogs, to maximize the value of the sawn products. The study was made by sawing simulation of 269 CT scanned logs of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies [L.] H. Karst.). The results showed that value recovery could be improved by 13% in average, compared to a sawing position based on log outer shape, and 21% compared to sawing logs centered and horns down. It can be concluded that a CT scanner, used in a sawline to optimize sawing parameters, has a large potential for increasing value recovery and thus profit.

Influence of initial plant density on sawn timber properties for Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco)

Mechanical wood properties are increasingly relevant for structural applications and are influenced by growing space availability. Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) has an increasing market share in Europe and is mainly processed to sawn timber. A sample of 164 thinning trees was taken from two Douglas-fir long-term forestry research plots in Germany. The end-use quality of about 2,000 side and center boards was analyzed as a function of initial plant density (1,000, 2,000, and 4,000 trees per hectare) and log position within the stem. Sawn timber quality was described by knottiness, density, modulus of elasticity, and strength. Explanatory parameters were radial position, longitudinal position, and initial plant density. All boards were strength graded visually and by the grading machine GoldenEye-706 using both X-rays for detecting densities and size as well as position of knots and laser interferometry for detecting eigenfrequency (DIN 4074, DIN 2012; EN 14081-2, CEN 2010). High plant density led to better mechanical sawn timber quality. Significant differences were especially observed between 1,000 and 2,000 trees per hectare. The yield of machine strength-graded center boards of strength class C24 increased from 50 to 89 % at low and high initial plant density, respectively. Foresters are able to improve end-product quality by controlling planting density in particular. The roundwood price that foresters get should be based on the proportion of higher strength classes within logs to give incentives for a more quality-oriented forest management.