Log Position Research Articles

High school water polo talent development environments and team cohesion:

Organised school sport is integral to the development pathways of most South African sports. The highly competitive nature of inter-school leagues often prioritises short-term success over long-term player development. The study compared successful and less successful teams in various talent development environments (TDE) and team cohesion variables based on the log position of a high school’s tournament (u/15 and u/18 age-groups) and established correlations between these variables. A cross-sectional design was used, and 146 boys (average age: 15.51±1.23 years) completed the Talent Development Environment Questionnaire (TDEQ-5) and the Youth Sport Environment Questionnaire (YSEQ) before the 2020 Mazinter Cup. The top three u/18 teams had significantly higher TDEQ-5 (Overall), Alignment of Expectations, Support Networks, YSEQ (Overall Cohesion), Task Cohesion and Social Cohesion scores than the bottom three teams. The results underscore the well-established cohesion–performance relationship. There were no differences at the u/15 level, where players competed in this age-group for the first time. Moderately strong positive correlations existed between various TDEQ-5 and YSEQ variables. Fostering team cohesion is integral to successful TDEs. Long-term player development and team success can be pursued simultaneously.

Use of Logs Downed by Wildfires as Erosion Barriers to Encourage Forest Auto-Regeneration: A Case Study in Calabria, Italy

The easy implementation of ecologically-sound remediation measures for the prompt stabilisation of burned areas may be crucial in Mediterranean forest environments. Manual in situ contour redirection of burned felled logs could aid in soil erosion control and facilitate forest self-regeneration. In this study, a plot-scale runoff/sediment yield survey was conducted in Calabria, Italy, within a Mediterranean pine forest that was affected by an extreme wildfire spanning over 15,000 hectares in the summer of 2021. The hydrological response to 24 rainfall events was analysed after one year of monitoring using nine Wischmeier and Smith 20% sloping plots, which were distributed into three plot-blocks representing different conditions (forested, burned with randomly directed fallen logs, and burned with fallen logs manually redirected along contour lines). The post-fire condition (with felled logs in random positions) exhibited a consistent overall increase (approximately four times) in runoff and sediment yield compared to the pre-fire situation. This degradation effect was mitigated by approximately 30% through the manual redirection of burned logs, which promoted early (three to five weeks) vegetation regeneration (including tree emergence) and enhanced coverage as vegetation spread from the log positions. The results obtained so far provide encouraging insights and warrant further research on steeper slopes and complementary aspects (regulatory, biological, mechanical, economic, etc.).

Epixylic diversity in an old-growth boreal forest is influenced by dynamic substrate attributes

Quantifying the factors influencing wood-inhabiting species in boreal forests is crucial for better understanding of their ecology and conservation needs. We estimated the influence of substrate attributes on epixylic diversity on logs of Picea abies, Betula pubescens, B. pendula, Populus tremula and Pinus sylvestris in a mixed European old-growth boreal forest with high substrate availability and continuity. The number of species of different taxonomic and substrate groups in respect of log attributes was estimated with generalized linear models. The composition of epixylic communities was analysed using non-metric multidimensional scaling with subsequent environmental fitting. Additionally, we calculated species interaction networks of log (tree) species and epixylic plants and lichens. Species richness per log decreased with the increasing height above the ground and increased with the increasing amount of accumulated litter. True epixylics were the most sensitive to a log position above the ground. Aspen and conifer logs harbored the highest richness of rare species of lichens and liverworts. Birch logs hosted mainly species with wide substrate amplitude. The whole epixylic community specialization index decreased in the order lichens, liverworts, mosses, vascular plants. Tree species identity and associated attributes (bark cover, pH etc.) as well as ‘dynamic’ attributes (accumulation of litter, wood decomposition and time since tree death) influenced the total species number, their taxonomic diversity, and the composition of epixylic communities. Our results indicate the importance of wood of various age and tree species for the conservation of epixylic diversity in boreal forests.

Analysis of a surface imaging system using a six degree-of-freedom couch.

PurposeTo validate surface imaging (SI)‐reported offsets using a six degree‐of‐freedom couch and an anthropomorphic phantom for commissioning and routine quality assurance of an SI system used for stereotactic radiosurgery (SRS).MethodsAn anthropomorphic phantom with a radiopaque ball bearing (BB) placed either anterior, midline, or posterior, was tracked with SI with a typical SRS region of interest. Couch motion in all six degrees of freedom was programmed and delivered on a linac. SI system logs were synchronized with linac trajectory logs. Ten random couch positions were selected at couch 0°, 45°, 90°, 270°, 315° with megavolt (MV) images taken to account for couch walkout. The SI residual error (ε), the difference between SI reported offset and MV or trajectory log position, was calculated. Residual errors were measured with and without one SI pod blocked.ResultsThe median [range] of magnitude of translational ε was 0.13 [0.07, 0.21], 0.16 [0.11, 0.26], 0.61 [0.50, 0.68], 0.49 [0.42, 0.55], 0.55 [0.38, 0.72] mm for couch rotations of 0°, 45°, 90°, 270°, 315°, respectively, for the midline BB and no pod blocked. The range of all translational ε from all couch angles (with and without pod block) at different BB positions is [0.05, 0.96] mm. The absolute range of difference when changing BB position when no pod is blocked in median translational ε is [0.01, 0.40] mm with the maximum at BB posterior. The absolute range of difference when not changing BB positions with and without pod block in median translational ε is [0.01, 0.37] mm with the maximum at BB posterior and couch 315°.ConclusionSI system and linac trajectory log analysis can be used to assess SI system performance with automated couch motion to validate SI accuracy.

Does your sleeping position affect your shoulder pain?

Aim: This study aimed to evaluate patients with shoulder pain according to their sleeping positions based on their clinical and magnetic resonance imaging (MRI) findings and to determine possible factors affecting shoulder pain.
 Material and Method: A total of 115 patients were included in the study. The severity of shoulder pain was evaluated with the visual analog scale (VAS), shoulder function was evaluated with the simple shoulder test, and the ability to perform physical activities was evaluated with the QuickDASH questionnaire. The biceps tendon, rotator cuff (RC), subacromial-subdeltoid bursa, glenohumeral joint (GHJ), and acromioclavicular joint (ACJ) were evaluated using MRI.
 Results: Of the patients with shoulder pain, 66.1% were female, 50.4% were primary school graduates, 53.9% were housewives, and 41.7% had a systemic disease. The mean age of the patients was 50.48±13.61 years while the median BMI and VAS values were 26.1 (18.2-41.4) and 8 (2-10), respectively. Considering the sleeping positions, it was found that 39.1% (most common) of the patients were sleeping in the fetus position, and considering the results of patients’ MRI examinations, the most common problem was related to the pathologies of the supraspinatus tendon (42.6%). It was found that sleep quality, which was poor in all patients, was worse in females (p=0.311), in those over 50 years of age (p=0.007), and those with a systemic disease (0.325). It was discovered that Pittsburgh's sleep quality index score was generally worse in those who slept in the soldier position and in the log position (p>0.05). The rates of pathologies of the supraspinatus tendon were found to be the highest in those that slept in the fetus position (p=0.931). It was also found that the rates of impingement, bicipital tendinitis, combined problems, and adhesive capsulitis did not differ significantly according to sleeping positions. Although occupational variables for supraspinatus degeneration remained significant in the model, having a desk job statistically significantly increased the probability of supraspinatus degeneration by 3.38 times when compared to being a housewife (95% CI=1.143-9.996; p=0.028) and it was identified that the probability of acromioclavicular degeneration increased by 1.16 times for every 1-unit increase in BMI.
 Conclusion: Different sleeping positions may predispose to different shoulder pathologies and shoulder pain, and shoulder pathologies may lead to deterioration of sleep quality, especially in older patients. For this reason, suggesting correct and appropriate sleeping positions may be a useful treatment method in reducing pain and disability and increasing sleep quality.

Quality traits of plantation Eucalyptus nitens logs impacting volume and value recovery of structural sawn boards

Plantations of Eucalyptus species are planted and grown worldwide for short rotations and with limited silvicultural treatments mostly to produce pulplogs for the pulp and paper industry. These resources could be used as raw material for construction timber, to support the increasing need of renewable resources from the building sector. To use fast-grown Eucalyptus logs as a source of sawn timber log grading standards are needed, which can be developed accounting for log characteristics impacting sawn timber recovery. This study aims to examine the quality of fast-grown Eucalyptus logs and relate relevant log quality traits to sawn timber characteristics. Wood quality and log characteristics of forty-nine fast-grown Eucalyptus logs and the characteristics and structural properties of 268 sawn boards milled from those logs were investigated. Significant differences were found in wood quality characteristics from logs sourced from different positions in the stem. However, sawn boards did not differ in their wood quality traits according to log position, which influenced only the amount and type of knots on the board surface and some structural properties. Moreover, log characteristics including volume, taper, log end splits and stiffness significantly impacted important board recovery traits. The results of this study show that log characteristics such as volume, taper, log end splits and stiffness should be accounted for in log grading standards seeking to grade fast-grown Eucalyptus resources for different product classes.

Wood Chemical Compositions of Raru Species Originating from Central Tapanuli, North Sumatra, Indonesia: Effect of Differences in Wood Species and Log Positions

Raru is a lesser-known plant species originating from North Sumatra, Indonesia. Information on the characteristics is still limited, especially its chemical component. Therefore, this study aims to examine the chemical composition information of Cotylelobium lanceolatum, Cotylelobium melanoxylon, and Vatica pauciflora woods based on their axial log positions (bottom, middle, and top). The wood chemical analysis was performed in terms of the Indonesian National Standard (SNI) method. Furthermore, the analysis measured holocellulose, α-cellulose, hemicellulose, lignin content, alcohol benzene extractive content, the extractive substance in hot and water, and solubility in NaOH 1%. The results indicated that the species and their log axial positions affected different chemical components, which included α-cellulose, hemicellulose, and lignin of C. lanceolatum amounting to 41.88%, 19.39%, and 28.68% respectively. Meanwhile, for C. Melanoxylon, they were 42.01%, 21.11%, and 24.76% respectively; and for V. pauciflora wood, they were 42.95%, 23.24%, and 30.11% respectively. The average values of the extractive contents including the solubility in 1: 2 ethanol benzene, NaOH, and hot water for C. lanceolatum, C. melanoxylon, and V. pauciflora wood were (10.58%, 27.62%, 8.13%), (14.54%, 28.22%, 7.82%), and (10.95%, 28.60%, 7.57%) respectively. The wood species had a significant effect on chemical components including lignin, cellulose and hemicellulose, and extractive solubility in cold water. Furthermore, the axial log position had a significant effect on all the parameters of the chemical composition of the wood being tested.

Modeling extra-deep electromagnetic logs using a deep neural network

Modern geosteering is heavily dependent on real-time interpretation of deep electromagnetic (EM) measurements. We have developed a methodology to construct a deep neural network (DNN) model trained to reproduce a full set of extra-deep EM logs consisting of 22 measurements per logging position. The model is trained in a 1D layered environment consisting of up to seven layers with different resistivity values. A commercial simulator provided by a tool vendor is used to generate a training data set. The data set size is limited because the simulator provided by the vendor is optimized for sequential execution. Therefore, we design a training data set that embraces the geologic rules and geosteering specifics supported by the forward model. We use this data set to produce an EM simulator based on a DNN without access to the proprietary information about the EM tool configuration or the original simulator source code. Despite using a relatively small training set size, the resulting DNN forward model is quite accurate for the considered examples: a multilayer synthetic case and a section of a published historical operation from the Goliat field. The observed average evaluation time of 0.15 ms per logging position makes it also suitable for future use as part of evaluation-hungry statistical and/or Monte Carlo inversion algorithms within geosteering workflows.

PSV-14 Influence of monsoon rainfall events on movement patterns of Angus crossbred vs. Raramuri Criollo cattle on desert rangeland

Abstract The Chihuahuan Desert averages 247 mm of precipitation annually, 53% of which occurs between July and September. Our objective was to examine movement, activity, pasture use, and watering patterns of Angus x Hereford (AH) and Raramuri Criollo (RC) cows on days with precipitation events (PE, ≥ 1.3 mm rain recorded) vs. days with no precipitation (NP) at the Jornada Experimental Range in southern New Mexico during the summers of 2015, 2016, and 2017. Breeds grazed two adjacent pastures (12A = 1190 ha; 12C = 1165 ha) separately in a crossover design for 4 weeks each year. Seven to nine randomly selected cows per breed were collared with Lotek 3300-LR GPS set to log position every 10 min. An average of 7.6 PE occurred during the 4-week trials each year. On PE days, cows traveled farther (PE = 6.95 vs. NP = 6.43 km, P < 0.01), spent more time grazing (PE = 9.07 vs. NP = 8.76 h/day, P = 0.07) and less time resting (PE = 13.90 vs. NP = 14.38 h/day, P = 0.01), and traveled similar distances from watering points (PE = 0.84 vs. NP = 0.80 km, P = 0.41) compared to NP days. On PE days, cows spent less time within 200 m (PE = 1.32 vs. NP = 2.95 h, P < 0.01) and 100 m (PE = 0.79 vs. NP = 1.90 h, P < 0.01) of drinkers regardless of breed. We detected no rainfall x breed interaction (P > 0.05). Overall, RC cows traveled farther, at higher velocities, spent more time grazing, less time resting, and explored areas with greater radius than AH counterparts (P < 0.05). Precipitation appeared to relax environmental constraints on activity of both breeds, likely due to availability of ephemeral watering sources and a transient drop in temperature.

Effects of radial force and log position on the stem on ring-debarker efficiency in frozen black spruce logs

ABSTRACT The effect of the radial force applied by a ring debarker tip to frozen black spruce logs, obtained at three positions on the stem, was studied. A one-arm ring-debarker prototype was developed, which controlled the radial force, rake angle, and cutting and feed speeds. The experiment consisted of debarking logs using three different levels of radial force. The rake angle (80°), tip overlap (20%), and cutting and feed speeds were kept constant. Debarking quality was evaluated by two criteria: the proportion of bark remaining on log surfaces and the amount of wood in bark residues. Log characteristics (dimensions, eccentricity, and knot features), bark/wood shear strength, and basic densities of sapwood and bark were also measured. Experiments revealed that log position on the stem did not affect debarking quality. The results also showed a significant effect of the radial force: the amount of bark remaining on log surfaces increased and the proportion of wood in bark residues decreased as radial force decreased. The effects of log eccentricity, bark/wood shear strength, and the proportion of knot surface on the debarking quality were examined. These results give useful information to improve debarking quality within the studied range of radial force, log diameter, and debarking parameters.

Ring debarking efficiency of frozen balsam fir logs is affected by the radial force but not by the log position on the stem

The effect of the radial force applied by a ring debarker tip to frozen balsam fir (Abies balsamea (L.) Mill.) logs, obtained at three positions on the stem, was studied. A one-armed ring debarker prototype was built, which controlled the radial force, the rake angle, and cutting and feed speeds. Balsam fir logs at −19 °C were debarked at three levels of radial force. The rake angle, tip overlap, tip edge radius, and cutting and feed speeds were kept constant. Debarking quality was evaluated by two criteria: the proportion of bark remaining on log surfaces and the amount of wood fibres in bark residues. Log characteristics (dimensions, eccentricity, bark thickness, and knot features), bark–wood shear strength, and the basic densities of sapwood and bark were also measured. Results showed that the radial force had a significant effect on debarking quality. The proportion of bark remaining on log surfaces increased while the amount of wood fibres in bark residues decreased as radial force decreased. A radial force of 18.5 N·mm−1is suggested for an optimal debarking quality. In contrast, log position on the stem did not affect the debarking quality indicators. Results also showed that the proportion of bark remaining on log surfaces increases as bark–wood shear strength and the proportion of knot surface increase, while the amount of wood fibres in bark residues increases as bark–wood shear strength decreases and logs are more eccentric. The results give useful information to improve the debarking process within the studied range of log diameters and debarking parameters.

Deformations of boards from uneven-aged Norway spruce stands

This study focused on wood distortion of boards sawn from Norway spruce (Picea abies (L.) Karst.) trees grown in uneven-aged stands. The stands were multi-aged with tree ages up to 170 years. In total, 60 trees were harvested from six stands that had been managed by single-tree selection for decades. A butt log and a top log were sawn from each tree, both 2.5 m long. Wood deformations were measured from boards dried to an average moisture content of 7–10% from the 2.5 m long boards. A linear mixed model was constructed to describe the variation in twist deformations in the boards after drying. According to the model analysis, twist increased with greater grain angle, greater average annual ring width and relative ring width difference, greater knot size and count, and the interaction of grain angle with the vertical log position along the stem. Greater distance of the board from the pith was associated with lesser twist. Contrary to expectations, proportion of compression wood and tree position in the stand diameter distribution were not correlated with twist. Pin knots, although their occurrence and size was minimal, had a high degree of correlation with twist. The occurrence and severity of twist remained approximately at the same level as in even-aged Norway spruce as observed in other studies.

Assessment of physical and mechanical properties of Papua New Guinea timber species

A comprehensive testing program has been developed to assess different physical and mechanical properties of 26 commercial and lesser-known Papua New Guinea species from secondary and plantation forests. The impact of log position in a tree on the mechanical properties has also been assessed to optimize the utilization of timbers along the value chain. The results showed that stiffness and bending strength tend to decrease or remain unchanged along the stem. Shear strength and Janka hardness displayed a similar trend to a lesser extent where the position in the tree had a limited impact on compression strength properties. Thus, segregating based on log position can be of interest where desired mechanical properties and costs associated with segregating justify optimum mechanical properties for the intended end use. The properties of selected species from plantations and regrowth forests were generally lower than those found in the literature for timbers from old-growth forests. The size of specimens tested, the amount and provenance of tested material, and some adaptive traits for tropical tree species are some factors potentially explaining observed differences. However, a comparison with recent studies tends to confirm the overall reduction of physical and mechanical properties when compared with old-growth forests timbers.

Team performance indicators as predictors of final log position and team success in Aviva Premiership, Guinness Pro 14, French Top 14 and Super Rugby

ABSTRACTThis study examined the relationship between team performance indicators and five characteristics of team success (final log position, league points, points difference, points scored and points conceded) over a full season in four major rugby union competitions. Number of tries scored was the most significant (p < .0001) predictor of all five team success characteristics. Univariate analysis also identified stolen line-outs, tackles completed percentage, line breaks, tackle breaks, turnovers won, and total mauls as significant predictors of team success. Multiple regression analysis of performance indicators for team success suggested that team success is multifactorial, and selected performance indicators constitute independent aspects for winning the game. Different sets of performance indicators selected for points scored versus points conceded suggested performance indicators that are significantly associated with offensive and defensive capabilities, respectively. The most important indicators of defensive performance are line-outs stolen and percentage of tackles completed, while line breaks are the most important indicator of offensive performance. Improving offensive capability must be focused on achieving line and tackle breaks. Conversely, to improve defensive performance, the focus must be on stealing opposition line-outs and effective tackling.

Numerical modelling of uncongested wood transport in the Rienz river

The Eulerian–Lagrangian model ORSA2D_WT is employed for the simulation of uncongested wood transport, with reference to a field experiment that studied the motion of regular and unbranched cylindrical wooden samples. The model calculates the entrainment, transport and deposition of large wood elements by computing the hydrodynamic forces exerted by the flow. The experimental log positions and displacements are taken as a reference for the first application of the numerical model to a real-scale test case. Special attention is paid to the presence of large boulders, which interact with floating wood and are represented as nearly 3D elements in the numerical domain, to take into account their effect both on the flow and on the logs. The comparison between the field data and the numerical simulation shows that the model fails to replicate exactly each log trajectory. However, when the focus moves to the behaviour of the entire group of logs, the model appears to simulate quite well the areas where logs are more prone to stop. The wood density implemented in the model strongly affect the results in terms of single log displacement, emphasizing the importance of the correct estimation of this parameter for large wood simulation.

On the inherent bias in the 2011 and 2012 Super Rugby tournament format

&#x0D; Fifteen regional rugby union teams compete for the Super Rugby title – five each from Australia, South Africa and New Zealand. In 2011, significant changes were made to the tournament format and these were continued in 2012. The new changes created an inherent bias, favouring teams that are strong relative to their conference, regardless of their overall strength. It is shown using logic and numerical results from simulations that teams that are weaker are able to unfairly progress to higher positions on the competition log at the end of the ‘regular’ season. The bias arises as a result of teams playing more matches against teams within their conference than other teams within the competition, and therefore the final log position represents a team’s strength relative to their own conference more than their overall strength. In the face of this evidence the tournament format should be altered to re-align with the primary goal of determining the best team in the competition. Should the tournament organisers choose not to change the tournament format, it would not be unreasonable for them to face criticism for failing to implement measures to ensure fairness to each team within the competition.

Coaching Efficacy, Player Perceptions of Coaches’ Leadership Styles, and Team Performance in Premier League Soccer

ABSTRACTThe coaching competency research has demonstrated the role of coaching efficacy and coaching behaviors on various athlete outcomes. However, athlete perceptions of these relationships and how they affect performance are less understood. Purpose: This study examined if coaching efficacy is predictive of player perceptions of coaches’ leadership styles, team atmosphere, and team performance in a soccer season. Method: Fifteen male premier league soccer coaches (Mage = 45.27, SD = 6.07) and 226 players (Mage = 25.66, SD = 3.96) from Botswana participated in the study. All participants completed a background information questionnaire. Coaches completed the Coaching Efficacy Scale. Players rated their coaches’ leadership styles using the Revised Leadership Scale for Sports as well as team atmosphere. Team performance was based on position in the league log and player ratings of the teams’ performance. Results: Findings showed that coaches’ self-ratings on technique efficacy predicted player perceptions of the coaches’ use of all six leadership styles. Game strategy efficacy predicted higher team atmosphere and team performance. Motivation efficacy was not significantly associated with player perceptions of the coaches’ use of any of the leadership styles, while character building efficacy was negatively associated with the various leadership styles. Conclusion: Findings provide support to previous research evidence linking higher coaching efficacy, leadership styles, and team outcomes. The study expands the emergent research within the coaching competency literature that examines player perceptions of coaches’ behaviors and leadership styles.

Log Data Structure for Illegal Logging Tracking System

Forest is a natural ecosystem that plays an important role in human life. Unfortunately, due to the exploitation of the forest wealth, the forest ecosystem becomes increasingly diminished. One of the most significant forest damages caused by illegal logging. In some cases, sometimes the information about log harvest that obtained from the logging area always has a discrepancy. To reduce the cunning which is done by the perpetrators, however, a system that can track and monitor the log position from a remote area is needed. This system using APC220 as a WSN using Star topology, embed with RFID reader and Arduino Uno. By designing a log data structure, the tracking and monitoring log is possible to build. This system was testing by three scenarios. The log data structure can be interpreted 100% by the system. According to the resulting test, it can be concluded that this system can track down the position of the log, and inform the forest patrol officer the predictable place where the log is missing.

Effect of Rotation Age and Thinning Regime on Visual and Structural Lumber Grades of Douglas-Fir Logs

Douglas-fir, the most important timber species in the Pacific Northwest, US (PNW), has high stiffness and strength. Growing it in plantations on short rotations since the 1980s has led to concerns about the impact of juvenile/mature wood proportion on wood properties. Lumber recovered from four sites in a thinning trial in the PNW was analyzed for relationships between thinning regime and lumber grade yield. Linear mixed-effects models were developed for understanding how rotation age and thinning affect the lumber grade yield. Log small-end diameter was overall the most important for describing the presence of an appearance grade, generally exhibiting an indirect relationship with the lower quality grades. Stand Quadratic Mean Diameter (QMD) was found to be the next most uniformly important predictor, its influence (positive or negative) depending on the lumber grade. For quantity within a grade, as log small-end diameter increased, the quantity of the highest grade increased, while decreasing the quantity of the lower grades differentially. Other tree and stand attributes were of varying importance among grades, including stand density, tree height, and stand slope, but logically depicted the tradeoffs or rebalancing among the grades as the tree and stand characteristics change. Structural lumber grade presence was described best by acoustic wave flight time, log position (decreasing presence in upper logs), and an increasing presence with rotation age. A smaller set of variables proved useful for describing quantity within a structural grade. Forest managers can use these results in planning to best capture value in harvesting, allowing them to direct raw materials (logs) to appropriate manufacturing facilities given market demand.

Potential of Veneer Peeled from Young Eucalypts in Laos

In Laos and neighboring countries, opportunities exist for the production of engineered wood products such as plywood and laminated veneer lumber to supply the rapid growth of construction, furnishing, and joinery activities. The objective of the present study was to assess the potential of peeling fast-growing high-yielding pulpwood from managed eucalypt stands in Laos for veneered products. Eucalyptus pellita, Eucalyptus camaldulensis, and eucalypt clone K7 (E. camaldulensis × E. deglupta) stands were characterized based on veneer quality and recovery. The influence of log position, log geometry, and other log traits during recovery were also investigated. The selected taxa achieved green veneer recoveries that ranged between 57% and 67%. End splitting and branch-related defects were the most important grade-limiting defects that restricted veneer sheet quality to a lower grade of most sheets. However, simple timely silvicultural decisions, such as pruning, could significantly help improve the quality of veneer obtained. The obtained results could be used in the formulation of recommendations to adopt better management practices in Laos to improve the value of plantation-grown wood.