Landfill Location Research Articles

Selecting the Suitable Landfill Location for Efficient Waste Management in Udham Singh Nagar District, Uttarakhand: A Geospatial and Multi-Criteria Approach

The effective management process of solid waste is a pressing concern in Udham Singh Nagar district, where approximately 245 metric tons of waste is generated daily. To address this issue, it is essential to identify suitable landfill sites. This research aims to identify optimal sites for waste disposal in the district by combining the capabilities of Geographic Information Systems (GIS) and Multi-Criteria Decision-Making (MCDM) techniques. A total of ten key factors were evaluated and prioritized according to their respective significance. A comprehensive analysis was conducted using theses parameters, including distance from road networks, rivers, railroads, sensitive area, geology, slope, elevation, population density, soil and land use/land cover (LULC). The study area was categorized into four suitability zones: high, moderate, low, and very low, representing 43.22%, 16.09%, 28.16%, and 12.53% of the area, respectively. The locations were selected based on the optimal distances considered for efficient waste management. The final results were validated using a receiver operating characteristic (ROC) curve, which utilized a randomly selected set of 50 potential landfill site locations. The analysis demonstrated good accuracy, with the area under the curve (AUC) indicating that 84% of the results effectively validated the spatial analysis. To achieve sustainable solid waste management, planners should consider implementing alternative strategies such as source reduction, composting, sanitary landfills, and public awareness programs. The resulting map provides potential sites for landfilling waste, which can aid urban planners and authorities in implementing effective urban waste management strategies.

Identification of potential landfill site suitability for urban solid waste disposal of Balurghat Municipality of Dakshin Dinajpur District using GIS and multi-criteria decision-making approach

The production of urban solid waste is one of the most dangerous environmental health risks on the planet. By selecting suitable landfill sites, it is possible to resolve the issue of health risks and environmental pollution driven by the unscientific disposal of solid waste. The current research is centered on determining suitable landfill locations for solid waste disposal within the Balurghat municipality through the integration of Geographic Information System (GIS) and Multi-Criteria Decision-Making (MCDM) approach. Ten factors were taken into consideration according to their weightage including elevation (0.022), Lithology (0.027), Slope (0.032), Land use and land cover LULC (0.040), Depth of water (0.057), Population density (0.075), Distance from sensitive places (0.107), Distance from road (0.154), Distance from river (0.205) and Land value (0.282). After conducting thorough field visits, an analytical hierarchy process (AHP) under the MCDM approach using GIS reveals acceptable sites that were noted and referenced. Final results are validated through a receiver operating characteristic (ROC) curve using randomly selected 80 potential landfill-suitable site location points with higher accuracy, and a total of 93% of the area under the curve (AUC) has been found worthy to validate the spatial result. The present investigation revealed that only 0.65% of land is very highly suitable, 31.06% of land is highly suitable, 52.54% of land is moderately suitable and 14.74% of land is not suitable for landfilling in Balurghat Municipal area and surroundings respectively. The highly suitable site belongs to the Mamna, Katna, Kuaran, Amtali, Noksha, Bannapara, and Malancha villages of the study area which is a very negligible area. So, the planners should adopt alternative strategies like source minimization, composting, sanitary landfills and awareness programmes for sustainable solid waste management. Hence, the Balurghat Municipality administration, urban planners, and administrative authorities stand to gain valuable insights from the findings of this study as they endeavour to enhance the management of urban solid waste in the area.

Quantifying the environmental impact of transportation for plastic film packaging end-of-life: Landfill, incineration, physical recycling, or chemical recycling

This study assesses the often-overlooked environmental impact of waste transportation in the life cycle of polymer-based multilayer packaging (PMP) in New York State (NYS). Analyzing greenhouse gas emissions (GHG) and energy consumption, the research includes various waste management scenarios, including landfilling, incineration, material recovery facilities (MRF) with chemical recycling (CR), and retail return with CR. The study maps existing waste management facilities, calculates travel distances, and introduces a proposed central CR facility. Findings reveal that compared to landfilling, transportation GHG emissions are higher for incineration (64 %), MRF with CR (264 %), and retail return with CR (158 %). The research highlights the importance of well-distributed landfill locations over sparse CR and incineration sites, hindering plastic film recycling advancement in the US. The model introduces three new incinerators, reducing transport energy (28 %) and GHG emissions (31 %). This study stands as the most comprehensive assessment of transportation impacts on plastic film waste, offering a versatile model for research, policy, and facility siting.

A comprehensive review on the integration of geographic information systems and artificial intelligence for landfill site selection: A systematic mapping perspective.

Properly selecting landfill sites for waste disposal is crucial for mitigating environmental and public health risks. Geographic Information Systems (GISs) and Artificial Intelligence (AI) techniques have emerged as valuable tools for identifying suitable landfill locations. This study presents a systematic mapping study (SMS) that investigates the usage of GIS and AI in landfill site selection. We searched six databases (IEEE Xplore, ACM Digital Library, Science Direct, Emerald Insight, Taylor & Francis Online and Web of Science) using predefined keywords related to landfills, GIS and AI. From 858 initially retrieved articles, we selected 48 relevant articles for in-depth analysis. Our research aimed to answer various questions, such as publication trends, the geographic distribution of case studies, criteria for assessing landfill suitability, tools and techniques employed, preliminary site screening methods, decision-making processes, limitations and future research directions. We used bubble charts, bar charts and tables to visualize the results. The findings of our study highlight the growing interest in using GIS and AI for landfill site selection and emphasize the importance of incorporating multi-criteria decision-making techniques. Furthermore, the results reveal the need for developing more advanced AI models, addressing the limitations of current approaches and exploring novel visualization techniques for enhancing landfill site selection processes. This study provides valuable insights for researchers and practitioners in waste management, environmental science and geoinformatics. It sets the groundwork for future research on improving GIS- and AI-based landfill site selection methodologies.

Hazardous Solid Waste Landfill Site Selection for İstanbul, Türkiye using Multi-Criteria Decision-Making Methods and GIS Data

The high toxicity of materials in disaster waste poses a significant risk to the environment, including the air, water, soil, and all living beings. One of the commonly used disposal methods for hazardous solid waste is landfilling. The selection of sites for hazardous solid waste disposal requires extreme care and attention to multiple factors from environmental, social, and economic points of view. Considering the anticipated earthquake in Istanbul and the city’s excessive population and urbanization, experts estimate that debris waste will be approximately 25 million tons. In this study, we propose a Geographic Information System (GIS) based fuzzy Multi-Criteria Decision Making (MCDM) approach to select hazardous solid waste landfill (HSWL) locations within the scope of disaster waste management for Istanbul. First, the evaluation criteria were identified through a literature review and expert opinions. Next, criteria are prioritized using the Fuzzy Analytic Hierarchy Process (FAHP). Then, GIS data for the criteria are gathered from multiple resources and entered into ArcGIS 10.8 for spatial analysis. Last, the suitability map of Istanbul for the HSWL construction is built. Considering five candidates, the Analytic Hierarchy Process (AHP) is applied to select the most suitable locations for Asian and European sites in the city. Accordingly, Fevzipaşa/Silivri for the European side and Hasanlı/Şile for the Asian side were selected as the most suitable two options. Last, a sensitivity analysis was performed to investigate the impact of the highest weight criterion on the final solution.

Suitability location for landfill using a fuzzy-GIS model: A case study in Hillah, Iraq

Abstract One of the most significant issues facing local governments and municipalities worldwide is choosing an appropriate location for landfills. In order to suggest appropriate places for waste sites, this study proposes a strategy using a fuzzy logic model and spatial analytic tools. The proposed approach utilized five parameters extracted from Geographic Information System (GIS) layers in Hillah city in Iraq, which include distances from hydrology features, residential or urban areas, transportation, and historical locations. These parameters were used as standards to construct a geodatabase for generating suitability maps. These indicators are relevant factors in determining the suitability of a site for an urban landfill. It is important to consider the distance from residential or urban areas when selecting a landfill site. A significant distance helps reduce the potential negative impacts on nearby communities, such as odors, noise, traffic, and health concerns associated with waste disposal, and for the other indicators. The fuzzy logic model is more accurate than conventional methods such as the weighted overlay approach. Based on a fuzzy logic model, the total surface area of acceptable locations is 1.1 km². According to the fuzzy logic model, some frequent adequate places were discovered to be beyond the city borders, to the west and south of the research region. To minimize the negative impacts on the environment and its residents, this study demonstrated how the fuzzy logic model and GIS might be combined for waste management decision concerns connected to landfill site selection.

Geo-spatial technology based on a multi-criteria evaluation technique used to find potential landfill sites in the town of Bule Hora in southern Ethiopia

ABSTRACT Solid waste has surfaced as an eminent and critical concern of environmental and social significance on a global scale, and Ethiopia, a developing country with limited income, has also encountered unfavorable outcomes due to substandard waste management practices. When pinpointing a fitting landfill location in the town of Bule Hora, various ecological, economic, and societal aspects must be considered; these may result in discord and exacerbate a multifaceted and lengthy process. Hence, this research aims to identify prospective landfill sites within the town and utilize geospatial methods, such as Multi-Criteria Evaluation and Analytic Hierarchy Process, to accomplish its objectives. The utilization of geospatial technology and multi-criteria evaluation provides an efficient manner to simultaneously address all bottlenecks involved in the selection of an appropriate landfill location. Geospatial technology evaluates and manages environmental constraints, whereas multi-criteria assessment categorizes choices based on their desirability. Furthermore, by employing a restriction map adhering to established standards, seven landfill sites have successfully been identified within the town. The Land Suitability Index assesses site suitability based on ecological factors, while the Total Hauling Distance evaluates sites within an economic framework. AHP determines weightings through 25.4 pairwise comparisons, resulting in a consistency ratio of 1.95%. The cartographic analysis is conducted using ESRI ArcGIS version 10.8 software. The findings of this study reveal that 98.69% of the area under study is subject to restrictions. The study recommends the implementation of geospatial methods for identifying suitable landfill sites, which would aid in the decision-making process and prevent hasty decisions from triggering environmental degradation. Proper waste disposal would augment the quality of life for residents by diminishing health hazards. The study endeavors to serve as a reference for other developing countries in selecting appropriate landfill sites. Implications: The town of Bule Hora also faces the problem of waste disposal; there is no scientifically selected suitable landfill. Residents of the town of Bule Hora practice waste disposal in open fields, near settlements, water bodies, roads, agricultural land, and other places. The main sources of solid waste in the town are homes, shops, hotels, restaurants, open markets, hospitals, educational institutions, private clinics, etc. Water pollution can potentially lead to the spread of waterborne diseases. According to reports from the Bule Horas Health Department, many people are affected by water-related diseases every year. These open landfill systems with no regard for settlement, topography, geology, surface, or groundwater conditions are the consequences of these unsuitable habitats and health problems. To reduce these problems, this study plays an important role in determining the suitability of landfills for the town and proposing alternative measures that can minimize negative environmental impacts from waste. This study aims to apply geospatial-based technology to a multi-criteria assessment technique to select perfectly suitable landfill sites that are environmentally friendly, economically cost-effective, and socially responsible; examine the town’s current waste management system; calculate the selected parameter weights for feature ranking; and delineate solid waste landfills.

Location of waste landfills in the aspect of hydrogeological conditions

Selecting a site for a landfill should minimise the inevitable ecological effects. The Regulation of the Minister of the Environment (2013) on waste landfills specifies, among others, that it is best to locate a landfill in a place with a natural geological barrier. For landfills other than hazardous and neutral waste, the minimum thickness of the barrier should be ≥1.0 m, and the value of its filtration coefficient k≤1.0·10– 9 m/s. Another criterion for the location of landfills is the expected piezometric table of groundwater, at least 1 m below the level of the planned excavation. In the paper, the last criterion is subjected to a critical analysis based on the results of my own research. It analyses what the piezometric table of groundwater is and what impact it has on the possible penetration of potential pollutants. The considerations are carried out on the example of the ground predicted for a waste landfill, for which tests necessary to determine the hydrogeological conditions were carried out.

Evaluating groundwater contamination: An examination of a municipal solid waste dump yard in southern India's Manchester City

Groundwater is a critical resource that is utilized for a variety of reasons, but over-extraction can lead to a number of environmental and socioeconomic issues such as diminished water supply, land subsidence, and pollution. To manage groundwater resources in a sustainable manner, proper monitoring, regulation, and conservation strategies are required. Groundwater contamination in India is growing as a result of population increase and industrialisation, which can have serious health and environmental consequences. To avoid groundwater pollution, it is critical to monitor and control possible sources of contamination, as well as to promote sustainable farming practices and the use of less hazardous pesticides and fertilizers. To get a better knowledge of groundwater pollution, the current study attempted to analyse the quality of groundwater in the neighbourhood of the Vellalore dump yard (located in Coimbatore, India), encompassing an area of 161.87 hectares. To examine the quality of groundwater in the contaminated region, several physical and chemical properties such as pH, dissolved oxygen, total dissolved solids, and water quality index were measured. The majority of the water samples from the region are classed as low quality and unsafe for drinking. The plume appears to be migrating northerly and northwest from the landfill location, most likely due to the natural slope of the dump site towards the northwestern direction. The bulk of the gathered samples have low water quality, making the water unfit for even basic residential use. These findings highlight the need of local governments taking proactive efforts to protect the groundwater in this area, pushing for a comprehensive approach to prevent additional pollution. The report emphasizes the critical need for local governments to take prompt action to prevent additional groundwater pollution by establishing a comprehensive strategy.

Geographic analysis of landfill suitability in Fez, Morocco: a multi-criteria approach

Solid waste management poses a significant challenge to sustainable development. Locating suitable landfill sites is a key difficulty. This study utilizes the Analytical Hierarchy Process (AHP) with a Geographic Information System (GIS) to identify potential landfill locations in Fez province, Morocco. Nine criteria were evaluated for the study area's suitability, including distance from surface water, distance from buildings, distance from roads, distance from protected areas, distance from forests, distance from farmland, elevation, slope, and slope direction. AHP determined criteria weights, and the Consistency Ratio (CR) ensured judgment reliability. Results highlight proximity to residential areas as the most critical factor, followed by distance from surface water and roads. The suitability map indicates the south and southeast of the province as more suitable for landfill placement than the urban areas, parks, and gardens in the north and northwest. These findings aid decision-makers in improving solid waste management practices in Fez province, Morocco.

Application of high-dimensional uniform manifold approximation and projection (UMAP) to cluster existing landfills on the basis of geographical and environmental features

Due to extreme conditions, which are influenced by the location of landfills, the release of pollutants has been recently proven to be more severe in estuary landfills, as these landfill locations are affected by both sea-water and river-water interactions. To identify geographic and environmental features linked to the extreme conditions of certain landfills, a high-dimensional clustering method combining Uniform Manifold Approximation and Projection (UMAP) with the Louvain algorithm is proposed.A case study was conducted using 17 noteworthy features that transform to Landfill Suitability Index (LSI) applied to hundreds of landfill sites in Taiwan. This study clustered landfills into 10 clusters and identified several clusters with significant extreme locations, including estuary landfills (7.9 %), fault-water-body landfills (8.2 %), and densely-populated-water-body landfills (17.6 %). Furthermore, a critical discovery of endangered Platalea minor habitats near these estuary landfills was made. Additionally, this work identified “healthy” landfills (11.2 %) that are minimally affected by the considered features. These findings demonstrate the promising potential of our framework for managers to systematically improve landfill management strategies. Moreover, our framework was tested by incorporating rainfall and flooding features in relation to climate change scenarios. To address the demand for land release from occupied landfills in Taiwan, there is a pressing need to expedite the transition to a circular economy, and our framework can provide further assistance in this regard. This approach is promising, as it provides a new method to evaluate the environmental risks linked to landfills and also identifies potential opportunities related to landfill mining.Finally, this work was extended to include a case study in England, which has 19,801 landfills and a dataset containing 15 relevant landfill features; in this case study, our framework identified 110 landfill clusters, and several placed in extreme locations, demonstrating that our framework is flexible for use in other regions outside of Taiwan.

Evaluation of site selections for solid waste landfill by using GIS in Phu Quoc island, Kien Giang province, Vietnam.

Selecting the location for domestic waste disposal and waste treatment plant is a crucial issue as it directs impacts on health-related, social and environmental factors. One of the effective tools for solving this problem is Geographic Information System (GIS) which employs Multi-Criteria Analysis (MCA). This research aims to identify the optimal locations to evaluate the existing solid waste landfill site and waste treatment plant for land use planning in Phu Quoc island in Kien Giang province for reducing the plastic waste leaking into the ocean. The island is categorized as the urban at small scale with population of 100,000 to 500,000; construction of waste treatment facilities (middle scale) with the capacity of 500 tons per day is now planned. These contents of this study are the new contributions to the methodology for data processing and data collection. The main research methods were applied to geo-spatial data collection derived from maps, satellite imagery, and existing local land use planning information. The criteria for site selections for solid waste landfill were chosen under Vietnamese construction standards and Ministry of Natural Resources and Environment, Ministry of Construction, international regulation, and the provincial policy. Then Analytic Hierarchy Process (AHP) and GIS processes were based on 9 main factors such as (1) distance to an urban area, (2) distance to a rural village, (3) distance to the water surface, (4) distance to roads, (5) distance to electrical supply stations, (6) distance to industrial zones, (7) distance to waste disposal, (8) compliance with the local land use planning, and (9) agreement for approval for site locations for solid waste landfill from the local community. National standard requirements for waste landfill site selection are adjusted to meet the local context. The updated land use data source is applied, and the recommendation for the suitability of the waste landfill sites is formulated. Study results showed that there are four potential sites located in Cua Can, Bai Thom, and Ham Ninh communes with a total area of 84.5 hectares. These areas are identified to be very suitable for solid waste landfill locations and location of waste treatment plants; and corresponding to the land use planning of the local government. The results of the study also recommend policies and solutions for environmental management in the coastal area of Phu Quoc island.

Determining The Location of Regional Landfill in Kediri District Using Spatial Approach with Geographic Information System Applications

Existing landfills in Kediri Regency and City are experiencing overcapacity conditions which are influenced by the increasing volume of waste along with the increasing population and the rapid development of urban areas. The Regional Landfill in Kediri Regency which is a national project based on Presidential Regulation of the Republic of Indonesia Number 80 of 2019 concerning the Acceleration of Economic Development in the Gresik - Bangkalan - Mojokerto - Surabaya - Sidoarjo - Lamongan, Bromo - Tengger - Semeru, and Selingkar Wilis - Lintas Selatan areas and is part of the Kediri Regency Regional Spatial Plan needs to be analyzed for location feasibility. The feasibility of the location of the Regional Landfill is the goal of this research with a spatial approach using Geographic Information Systems by considering the parameters in SNI 03-3241-1994 concerning Procedures for Selecting the Location of Waste Landfills. The selected variables are constraining factors consisting of regional criteria, namely geological conditions, hydrogeological conditions, slope, protected areas, distance to airfields, flood susceptibility and distance to water bodies. The feasible locations for regional landfill based on spatial analysis using GIS are in Ngadiluwih, Kras, Purwoasri, and Mojo sub-districts.

Geotechnical Aspects in the Planning of Radioactive by Product Landfill Facilities

Radioactive by-products (MIR) can be produced from non-nuclear activities. It is crucial to ensure proper management of MIR from the moment they are created. The issue of permanent disposal in landfill facilities has recently been resolved. Design planning, land availability, financing, public acceptance, and other factors are essential considerations in this process. This paper provides an overview of the role and influence of geotechnical engineering in planning MIR landfill facilities. The methodology involves a literature study of regulations, research results, and recommendations from international organizations. The Government Regulation No. 52 of 2022 outlines the general landfill criteria. However, the regulation of MIR and Hazardous and Toxic Waste (B3) differs in concept and approach. Geotechnical studies the properties of rocks and soil. For MIR landfills, the characteristics of the MIR to be disposed of must be considered during planning and design. Physical, chemical, and activity concentration elements of the MIR affect the planning and design process. Geotechnical aspects, such as soil and rock type, groundwater level (MAT), pore water pressure, grain size, water content, density, shear strength, compression, permeability, and chemical testing, are necessary considerations. Several geotechnical tests are carried out to prevent infrastructure failure. The first step in planning and design is to understand the characteristics of the MIR material to be disposed of in landfills. Some geotechnical aspects include slope stability analysis, soil carrying capacity, and foundation suitability. Although the current regulations do not explicitly mention the geotechnical aspects that must be met, the general criteria for the acceptability of landfill locations are used in designing landfill designs. Keywords: radioactive by-products, planning, landfill, geotechnic

Legal Problems of Environmental Information in the Management of Solid Municipal Waste

The article reveals some problems of legal regulation of the solid municipal waste management system and the elimination of accumulated environmental damage in terms of the elimination of unauthorized locations of solid municipal waste and landfills of solid municipal waste. The importance of the measures and rules adopted by the state to ensure the implementation of environmental protection projects to eliminate accumulated environmental damage, as well as to reduce the negative impact on the environment and human health, the importance of improving legislation in terms of ensuring access to environmental information in the field of education, processing, disposal and disposal of municipal solid waste is noted. Particular attention is paid to the need to establish transparency of the state environmental management aimed at implementing an Environmental Safety Strategy, one of the main issues of which is the creation of an integrated system for the management of solid municipal waste and the elimination of accumulated environmental damage.The direct dependence of ensuring environmental safety and achieving the indicators of the national development goals of the country on the transparency of environmental information generated during the management of solid municipal waste and the elimination of unauthorized landfills of solid municipal waste has been established. The article also touches upon some issues of coordination of the activities of public authorities that ensure the formation of a sustainable system of solid municipal waste management, and the importance of environmental information in the framework of building interdepartmental cooperation in this direction.

Formulation of Set Covering Problem Using Myopic Algorithm and Greedy Reduction Algorithm in Determining the Location of Temporary Landfills in Semambu Island Village, Ogan Ilir Regency, South Sumatra

This study discusses Set Covering Problem (SCP) in designing the optimal temporary waste disposal site (TWDS) in Semambu Island Village using the Myopic Algorithm (MA) and Greedy Reduction Algorithm (GRA). The analysis was carried out and compared using a maximum distance of 500m and 1000m to get the best solution from two methods. The results of the p Median Problem by LINGO 13.0 software and MA with a maximum distance of 500m show the same TWDS location, namely Working Area (WA) 1, 2, 3, 4, 5, and 6 with the location of the candidate TWDS being at TWDS 2 WA 1, TWDS 1 WA 2, TWDS 2 WA 3, and TWDS 2 WA 5. For 1000m, it will be the location of the candidate’s TWDS being at TWDS 2 WA 1, TWDS WA 2, and TWDS 2 WA 3. Using GRA, results were obtained will be 4 TWDS, namely TWDS 2 Hamlet 1, TWDS 1 Hamlet 2, TWDS 2 Hamlet 3, TWDS 2, Hamlet 5. Then using GRA, 2 solutions are obtained, namely columns 2 and 5 which dominate. Column 2 nomination are Hamlets 1, 2, 3, and 6. Column 5 which dominates will be Hamlets 1, 3, 5, and 6.

Detection of Microbiological Activity in Some Collected Water Samples near Dumping Site of Solid Waste, Khartoum North, Sudan

A study was conducted at the Wadafiea landfill in Al Khartoum Bahri (North), Sudan, to determine the level of microbial contamination in water samples collected from nearby areas around the landfill. The purpose of this study was to evaluate the impact of solid waste disposal in open dumps and assess the associated risks to water. The study tested for coliform bacteria (E.coli) and compared the seasonal differences between the samples collected during the dry and rainy seasons. The results indicated higher levels of E.coli contamination in each season, with the rainy season samples showing particularly high levels (66.03 × 10⁴ cfu/ml) compared to the dry season (31.93 × 10⁴ cfu/ml). It was concluded that the groundwater was highly polluted due to the current landfill location. The local authorities and the department of solid waste management were advised to close this landfill and relocate it to the outskirts of Al Khartoum Bahri (North) city. Additionally, it was recommended that international regulations for standard landfills should be maintained and implemented.

Integration of LCSA and GIS-based MCDM for sustainable landfill site selection: a case study.

The paper aims at developing a framework for decision-support to select a sustainable landfill site in Bardaskan City (Iran) by combining life cycle sustainability assessment (LCSA) concepts and geographic information system (GIS)-based multi-criteria decision-making (MCDM). Overall, 13 criteria were chosen (three constraints and 10 factors) and classified into three main aspects of sustainability (i.e., environmental, social, and economic) to achieve the research goals. Boolean and fuzzy logic were employed to standardize the classified constraints and factors, respectively. Analytic hierarchy process (AHP) was used to calculate the factors' weights and then suitability maps were produced using the GIS analysis. The layers were combined using simple additive weighting (SAW). Next, the most sustainable sites were obtained. The results indicated that distance from city backline, groundwater depth, and distance from rural areas were the most significant factors with the weight of 0.338, 0.141, and 0.129, respectively. The final map of suitable sites was created by classifying the SAW layer according to 75, 80, and 85% of suitability to show the high, medium, and low priority areas for landfill site selection, respectively. Therefore, integration of LCSA and GIS-based MCDM to select the sustainable landfill site for municipal solid waste (MSW) is highly important, which can be effectively employed in regional and urban planning to select the location of appropriate and sustainable landfills.

Geographical Distribution of Landfills in the Outskirts of Baghdad Governorate using the GIS

The problem of solid waste from domestic, industrial, commercial and medical sources is one of the most important problems facing the local administration in all Iraqi cities. The danger of this problem increases with the rapid increase in the population, changing lifestyles, consumption patterns, limited land suitable for landfill, and high costs of collection and disposal. This research aims to solve these problems by determining the locations of current landfills located in the outskirts of Baghdad Governorate. The ArcGIS program was used, where the sites of the landfills were determined on the map and through the available data about the areas. it was concluded that the existing landfill sites do not meet environmental conditions and standards. According to the statistics of 2016/2020, which the amount of waste in some areas has increased, and decreased in others. The results show that each of 16 municipalities at the outskirts of Baghdad Governorate has only one landfill. The Al-Zuhur district is one of the most waste-producing areas, according to the statistics of the years 2016/2020, due to the high population ratio in that area. Mahmudiyah was recorded among high rate waste production areas, as the amount of waste in 2016 was 49,000 tons, but decreased slightly in 2020 to 48,000 tons. The research recommends following the health and environmental foundations in proper planning for the establishment of waste dumps, as well as the necessity of activating the role of geographic information systems in the field of proper waste management and environmental planning.

PENGARUH AIR LINDI (LEACHATE) TERHADAP KUALITAS AIR PERMUKAAN DI SEKITAR TPA KOTA SORONG

Waste has been a serious problem from the past until now. Waste contains pollutants both organic and inorganic. The waste decomposes naturally, but the results of the decomposition are scattered in the garbage pile. Piles of garbage produce a liquid called leachate. Such leachate water contains organic matter and heavy metals. Rainwater has a role as a solvent medium to carry pollutants from waste decomposition, if not managed properly pollutants in leachate water will pollute river water, air, growing pest animals and vector diseases so as to cause various environmental problems and negative impacts on health for those who use it around the Sorong City Landfill (TPA) location because leachate can enter and flow through soil pores and surface water in excessive amounts or concentrations. The purpose of this study was to determine the condition of surface water quality around the Sorong City Landfill (TPA) and identify the influence of leachate from the Sorong City Landfill (TPA) on the quality of surface water around the landfill with water samples taken, namely river water based on PP No. 82 of 2001 concerning Water Quality management and Water Pollution Control and KEPMEN LH No.51 of 1995 concerning Liquid Waste Quality Standards. The benefits of this research include being able to determine the quality of surface water around the Sorong City Landfill (TPA), as information material for residents living around the Sorong City landfill who use the water such as river water, as a basis for the arrangement of landfills (TPA) and the management of leachate wastewater treatment plants (WWTP) so that they are not directly discharged into the environment. In addition, this research is expected to be able to answer problems using methods that have been selected based on studies from previous research or research.