Localized Surface Plasmon Resonance Measurements Research Articles

Localized surface plasmon resonance properties of green synthesized Ag/rGO composite nanoparticles utilizing Amaranthus viridis extract for biosensor applications

The green synthesized Ag/rGO composite nanoparticles were successfully synthesized using the Hummers' method with Amaranthus viridis extract. The localized surface plasmon resonance (LSPR) behavior of the Ag/rGO was studied using the Kretschmann configuration consisting of prism/Au/Ag/rGO/air. The addition of the Ag/rGO composite to the prism system aims to determine the effect of rGO on the SPR angle. X-ray diffraction results showed that there were four diffraction peaks with the presence of lattice planes (111), (200), (220), and (311), proving the face-centered cubic crystal structure of silver. The characterization results showed that the size of Ag NPs was 23.1 nm, and that of Ag/rGO composite was 16.7 nm. The EDX results of the Ag/rGO composite showed the presence of several elements such as C, O, Ag, and N. Fourier transform infrared analysis showed the presence of O–H, C–H, CO, CC, and C–O–C functional groups confirming the formation of Ag/rGO. The UV–Vis spectra showed an absorption peak at 257 nm and 346–412 nm with an increase in band gap energy from 3.27 eV to 3.40 eV. Meanwhile, the LSPR measurements demonstrate a shift in the SPR angle due to the addition of rGO, in which the angle shifts from 0.33 ° to 0.96 °. In conclusion, the addition of rGO can optimize the plasmonic properties of Ag, so that it potentially could be applied to enhance the performance of SPR-based biosensor applications.

Development of Nano-Micro Fused LSPR Chip for In Situ Single-Cell Secretion Analysis.

Single-cell analysis has become increasingly important in uncovering cell heterogeneity, which has great implications in medicine and biology for a deep understanding of cell characteristics. Owing to its significance, it is vital to create novel devices that can reveal special or unique cells. In this work, we developed a single-cell secretion detection chip consisting of microwells that can trap single cells. Each well is surrounded by Au nanopillars capable of localized surface plasmon resonance (LSPR) measurement. Using microfabrication and nanofabrication techniques, Au nanopillar and microwell structures were fabricated on a COP film. The Au nanopillar was modified with IL-6 antibodies for the direct detection of single-cell secreted IL-6 via LSPR absorbance peak shift. Specific IL-6 detection was successfully demonstrated using a null and IL-6 oversecreting Jurkat cell. A high single-cell trapping efficiency of over 80% was also achieved. Overall, the development of this single-cell secretion detection chip with a simple LSPR measurement setup represents a significant development in the field of cell biology and immunology, providing researchers with a powerful tool for studying individual cells and their secreted cytokines, and is useful for point-of-care testing (POCT) diagnostics.

LSPR-Based Biosensing Enables the Detection of Antimicrobial Resistance Genes.

The development of rapid, simple, and accurate bioassays for the detection of nucleic acids has received increasing demand in recent years. Here, localized surface plasmon resonance (LSPR) spectroscopy for the detection of an antimicrobial resistance gene, sulfhydryl variable β-lactamase (blaSHV), which confers resistance against a broad spectrum of β-lactam antibiotics is used. By performing limit of detection experiments, a 23 nucleotide (nt) long deoxyribonucleic acid (DNA) sequence down to 25nm wasdetected, whereby the signal intensity is inversely correlated with sequence length (23, 43, 63, and 100nt). In addition to endpoint measurements of hybridization events, the setup also allowed to monitor the hybridization events in real-time, and consequently enabled to extract kinetic parameters of the studied binding reaction. Performing LSPR measurements using single nucleotide polymorphism (SNP) variants of blaSHV revealed that these sequences can be distinguished from the fully complementary sequence. The possibility to distinguish such sequences is of utmost importance in clinical environments, as it allows to identify mutations essential for enzyme function and thus, is crucial for the correct treatment with antibiotics. Taken together, this system provides a robust, label-free, and cost-efficient analytical tool for the detection of nucleic acids and will enable the surveillance of antimicrobial resistance determinants.

Basics of the LSPR Sensors for Soft Matter at Interfaces

An important class of localized surface plasmon resonance (LSPR)–based sensors implies the fabrication of an array of plasmonic metal nanoparticles on the support in combination with a thin protective dielectric layer. If needed, this layer can be covered, e.g., by a suitable thin biological layer, e.g., a lipid bilayer with receptors. The attachment of analyte (e.g., protein molecules or vesicles) to such interfaces is tracked via its indirect optical effect on the LSPR-related peak extinction wavelength. Such sensors have been commercialized and are now used to study biological soft matter. The length scale of the local field able in probing analyte around plasmonic nanoparticles is in this case on the order of 20 nm. Conceptually, these LSPR sensors are similar to the SPR sensors which were developed much earlier. Herein, the similarities and differences in the formalisms used to interpret SPR and LSPR measurements are discussed in detail. In particular, the exponential and power-law attenuation functions employed in these formalisms to describe the drop of the field are compared from various perspectives. The applicability of the power-law attenuation function in the context of LSPR is illustrated by using a generic model describing spherically shaped plasmonic metal nanoparticles. This model is also employed to illustrate the sensitivity of LSPR sensors with respect to various quantities. Among more specific results, the available expressions for the signal reduction factor for analyte nanoparticles of various shapes are collected and complemented by new ones. In addition, the equation describing the LSPR signal related to analyte attachment to a rough surface is presented.

Cost‐Effective and Robust Multispectral Light‐Emitting Diode Device for the Readout of Plasmonic Microarray Sensors

Localized surface plasmon resonance (LSPR) is a phenomenon known for more than 100 years, which arises from the interaction of light with metallic nanoparticles. In recent years, the field of LSPR sensing has become increasingly important in bioanalytics. Herein, a simple and robust device setup to perform time‐resolved LSPR measurements with inexpensive array sensor chips is presented. For this purpose, gold nanoparticles are spotted onto glass substrates under different conditions (droplet size/number, temperature, and humidity) to achieve an optimal signal‐to‐noise ratio. To verify the setup and the spotted sensor chips, bulk sensitivity measurements with solutions of varying refractive index and surface sensitivity measurements with layer‐by‐layer (LbL) deposition are performed. It is shown that slower drying minimizes the edge effects of ring‐like deposits (coffee ring effect) and that the spots with higher particle densities are more suitable for sensor applications. In general, the use of six light‐emitting diode (LEDs) enables a simple centroid calculation as well as an evaluation via individual LED intensities. The presented cost‐effective system allows parallel reading of more than 100 spots in a label‐free platform, and together with the optimized low‐cost sensors, it provides an interesting alternative for the development of future on‐site diagnostics.

Solvent-induced conformational tuning of lysozyme protein adlayers on silica surfaces: A QCM-D and LSPR study

There is broad interest in functionalizing solid surfaces with lysozyme, which is a widely studied antimicrobial protein. To date, most efforts have focused on developing more effective immobilization schemes to promote lysozyme attachment in fully aqueous conditions, while there remains an outstanding need to understand how tuning the solution-phase conformational stability of lysozyme proteins can modulate adsorption behavior and resulting adlayer properties. Inspired by the unique conformational behavior of lysozyme proteins in water-ethanol mixtures, we conducted quartz crystal microbalance-dissipation (QCM-D) and localized surface plasmon resonance (LSPR) measurements to systematically investigate the adsorption behavior of lysozyme proteins onto silica surfaces across a wide range of water-ethanol mixtures. Our findings revealed that lysozyme adsorption behavior strongly depended on the ethanol fraction in a non-monotonic fashion and this trend could be rationalized by taking into account how competing effects of water and ethanol solvation influence solution-phase protein size and conformational stability. Integrated analysis of the QCM-D and LSPR measurement trends enabled quantitative determination of the solvent mass within lysozyme adlayers, which tended to decrease at higher ethanol fractions and supported that the hydrodynamic properties of lysozyme adlayers are mainly influenced by the degree of protein conformational flexibility as opposed to solvation effects alone.

Unraveling How Ethanol-Induced Conformational Changes Affect BSA Protein Adsorption onto Silica Surfaces.

Protein adsorption at solid-liquid interfaces is highly relevant to a wide range of applications such as biosensors, drug delivery, and pharmaceuticals. Understanding how protein conformation in bulk solution impacts adsorption behavior is fundamentally important and could also lead to the development of improved protein-based coatings. To date, relevant studies have been conducted in aqueous solutions, while it remains largely unknown how organic solvents and more specifically solvent-induced conformational changes might influence protein adsorption. Herein, using the quartz crystal microbalance-dissipation (QCM-D) and localized surface plasmon resonance (LSPR) techniques, we systematically investigated the real-time adsorption behavior of bovine serum albumin (BSA) protein onto silica surfaces in different water-ethanol mixtures ranging from 0 to 60% (v/v) ethanol. The results showed that there was greater protein adsorption at higher ethanol fractions in the 10-30% range, while more complex adsorption profiles were observed in the 40-60% range. The combination of QCM-D and LSPR measurements led us to further identify specific cases in water-ethanol mixtures where washing steps caused densification of the adsorbed protein layer as opposed to typical desorption of weakly adsorbed molecules in aqueous conditions. We discuss mechanistic factors that drive these overall adsorption trends by taking into account how ethanol fraction affects BSA conformation in bulk solution. Together, our findings demonstrate that BSA proteins can adsorb onto silica surfaces across a wide range of water-ethanol mixture conditions, while specific adsorption profiles depended on the ethanol fraction in a manner closely linked to solution-phase conformational properties.

Composite-Scattering Plasmonic Nanoprobes for Label-Free, Quantitative Biomolecular Sensing.

Biosensing based on localized surface plasmon resonance (LSPR) relies on concentrating light to a nanometeric spot and leads to a highly enhanced electromagnetic field near the metal nanostructure. Here, a design of plasmonic nanostructures based on rationally structured metal-dielectric combinations is presented, called composite scattering probes (CSPs), to generate an integrated multimodal biosensing platform featuring LSPR and surface-enhanced Raman spectroscopy (SERS). Specifically, CSP configurations are proposed, which have several prominent resonance peaks enabling higher tunability and sensitivity for self-referenced multiplexed analyte sensing. Using electron-beam evaporation and thermal dewetting, large-area, uniform, and tunable CSPs are fabricated, which are suitable for label-free LSPR and SERS measurements. The CSP prototypes are used to demonstrate refractive index sensing and molecular analysis using albumin as a model analyte. By using partial least squares on recorded absorption profiles, differentiation of subtle changes in refractive index (as low as 0.001) in the CSP milieu is demonstrated. Additionally, CSPs facilitate complementary untargeted plasmon-enhanced Raman measurements from the sample's compositional contributors. With further refinement, it is envisioned that the method may lead to a sensitive, versatile, and tunable platform for quantitative concentration determination and molecular fingerprinting, particularly where limited a priori information of the sample is available.

Label-free localized surface plasmon resonance biosensor composed of multi-functional DNA 3 way junction on hollow Au spike-like nanoparticles (HAuSN) for avian influenza virus detection

In the present study, we fabricated a label-free avian influenza (AIV H5N1) detection biosensor composed of a multi-functional DNA 3 way-Junction (3 W J) on a hollow Au spike-like nanoparticle (hAuSN) using a localized surface plasmon resonance (LSPR) method. To construct the multi-functional DNA (MF-DNA) as a bioprobe, the 3 W J was introduced. The proposed AIV detection bioprobe should contain three functionalities: target recognition, signal amplification, and connection to substrate. To achieve this goal, each piece of the DNA 3 W J was tailored to a hemagglutinin (HA) binding aptamer, FAM dye and thiol group, respectively. The assembly of each DNA 3 W J functional fragment was then confirmed by TBM-Native PAGE. Moreover, the hAuSN was immobilized on the indium-tin-oxide (ITO) substrate for LSPR measurement. The DNA 3 W J was immobilized onto the hAuSN electrode through the thiol-group of DNA 3 W J. The fabricated DNA 3 W J/hAuSN heterolayer on the ITO substrate was investigated by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). LSPR experiments were conducted to confirm HA protein binding to the DNA 3 W J/ hAuSN -modified electrode. The proposed biosensor can detected the HA protein in PBS buffer (LOD: 1 pM) as well as in the diluted chicken serum (LOD: 1 pM). The present study details a label-free, simple fabrication method consisted of DNA 3 W J/ hAuSN heterolayer that uses easy-to-tailor elements to detect not only AIV but also various viruses detection platform easily.

Determination of symmetry breaking transitions and polymorphism in Au[sbnd]Cu nanostructures by nano-beam electron diffraction

Alloyed nanostructures of AuCu in varying compositions were synthesized by wet chemistry routes. Synthetic products in all the compositions are FCC solid solutions of AuCu with slightly varying lattice parameter. Variation in shape, size, and nature of attachment has been studied through electron microscopy and localized surface plasmon resonance measurements. FCC solid solutions upon heat-treatment at ~400 °C for 1 h under N2 atmosphere, transform to orthorhombic AuCu (oP8) and many superlattice structures based on it. Nano-beam electron diffraction reveals multiplication of periodicities along [31¯0], [210] and [201] directions, mostly originating due to the chemical or vacancy ordering. Symmetry breaking transitions of orthorhombic AuCu (oP8) from Pbam to P21212 has been observed. The phase with P21212 space group also shows polymorphic transition to P21221. All these transitions have been confirmed through nano-beam electron diffraction coupled with computed diffraction patterns based on Wyckoff positions. Commonly observed orthorhombic (oI40) AuCu upon heat-treatment has not been found. The multiplication of lattice periodicity along certain crystallographic directions, symmetry breaking transition and polymorphism in the same sub-group are important findings of this work. These might have far-reaching implications in electron transport properties of such nanostructures.

Nanoplasmonic Ruler for Measuring Separation Distance between Supported Lipid Bilayers and Oxide Surfaces.

Unraveling the details of how supported lipid bilayers (SLBs) are coupled to oxide surfaces is experimentally challenging, and there is an outstanding need to develop highly surface-sensitive measurement strategies to determine SLB separation distances. Indeed, subtle variations in separation distance can be associated with significant differences in bilayer-substrate interaction energy. Herein, we report a nanoplasmonic ruler strategy to measure the absolute separation distance between SLBs and oxide surfaces. A localized surface plasmon resonance (LSPR) sensor was employed to track SLB formation onto titania- and silica-coated gold nanodisk arrays. To interpret measurement data, an analytical model relating the LSPR measurement response to bilayer-substrate separation distance was developed based on finite-difference time-domain (FDTD) simulations and theoretical calculations. The results indicate that there is a larger separation distance between SLBs and titania surfaces than silica surfaces, and the trend was consistent across three tested lipid compositions. We discuss these findings within the context of the interfacial forces underpinning bilayer-substrate interactions, and the nanoplasmonic ruler strategy provides the first direct experimental evidence comparing SLB separation distances on titania and silica surfaces.

Determination of fermentable sugars in beer wort by gold nanoparticles@polydopamine: A layer-by-layer approach for Localized Surface Plasmon Resonance measurements at fixed wavelength

Polydopamine decorated in-situ with Localized Surface Plasmon Resonance (LSPR)-active gold nanoparticles (AuNPs) may extend the applicability of nanoplasmonic materials to original and innovative applications in several fields. Here we report the modification of disposable UV–Vis polystyrene cuvettes with AuNPs@PDA for refractive index LSPR-based measurements. An original layer-by-layer deposition method of PDA followed by AuNPs growth is here developed, showing linear correlation between PDA thickness and optical properties. In particular, the modulation from wavelength sensitivity toward absorbance sensitivity is obtained, allowing measurements at fixed wavelength (578 nm). As applicative example of the photonic cuvettes, the measurement of fermentable sugars in beer wort is here reported. The analytical performance of our approach has been directly compared to portable refractometer of reference, displaying excellent results in terms of the precise estimation of sugars in beer wort (expressed in degrees Brix), reproducibility and sensitivity. The approach may be extended to other materials of interest in LSPR based optical sensors, e.g. optical fibers.

Thermoresponsive nanoparticle agglomeration/aggregation in salt solutions: Dependence on graft density

Gold nanoparticles with a graft density of 0.09, 0.30 and 0.40chains/nm2 of poly(N-isopropylacrylamide) were reproducibly synthesized by varying the ratio of disulfide terminated poly(N-isopropylacrylamide) to gold nanoparticle. The polymer coated nanoparticles were stable at room temperature in 50mM NaCl, yet agglomerated at 37°C. Previous studies have observed conflicting results as to the reversibility of this agglomeration. Particle agglomeration with three different graft densities was studied in 50mM NaCl by measurements of their localized surface plasmon resonance and hydrodynamic diameter, and imaging with electron microscopy. Agglomerates with a polymer graft density of 0.30 and 0.40chains/nm2 could be dispersed with sonication, while particles with a graft density of 0.09chains/nm2 irreversibly aggregated. The graft density dependence on whether agglomeration or aggregation occurred is due to changes in collapsed polymer steric effects. Localized surface plasmon resonance measurements of agglomerates were discordant with hydrodynamic diameter measurements in determining agglomeration reversibility, which shed light on reasons previous reports yielded different interpretations on the reversibility of this agglomeration. This work demonstrates how polymer graft density affects thermoresponsive nanoparticle stability in salt solutions and the need for use of complementary techniques when determining agglomeration.

Probing the Interaction of Dielectric Nanoparticles with Supported Lipid Membrane Coatings on Nanoplasmonic Arrays.

The integration of supported lipid membranes with surface-based nanoplasmonic arrays provides a powerful sensing approach to investigate biointerfacial phenomena at membrane interfaces. While a growing number of lipid vesicles, protein, and nucleic acid systems have been explored with nanoplasmonic sensors, there has been only very limited investigation of the interactions between solution-phase nanomaterials and supported lipid membranes. Herein, we established a surface-based localized surface plasmon resonance (LSPR) sensing platform for probing the interaction of dielectric nanoparticles with supported lipid bilayer (SLB)-coated, plasmonic nanodisk arrays. A key emphasis was placed on controlling membrane functionality by tuning the membrane surface charge vis-à-vis lipid composition. The optical sensing properties of the bare and SLB-coated sensor surfaces were quantitatively compared, and provided an experimental approach to evaluate nanoparticle–membrane interactions across different SLB platforms. While the interaction of negatively-charged silica nanoparticles (SiNPs) with a zwitterionic SLB resulted in monotonic adsorption, a stronger interaction with a positively-charged SLB resulted in adsorption and lipid transfer from the SLB to the SiNP surface, in turn influencing the LSPR measurement responses based on the changing spatial proximity of transferred lipids relative to the sensor surface. Precoating SiNPs with bovine serum albumin (BSA) suppressed lipid transfer, resulting in monotonic adsorption onto both zwitterionic and positively-charged SLBs. Collectively, our findings contribute a quantitative understanding of how supported lipid membrane coatings influence the sensing performance of nanoplasmonic arrays, and demonstrate how the high surface sensitivity of nanoplasmonic sensors is well-suited for detecting the complex interactions between nanoparticles and lipid membranes.

Probing Spatial Proximity of Supported Lipid Bilayers to Silica Surfaces by Localized Surface Plasmon Resonance Sensing.

On account of high surface sensitivity, localized surface plasmon resonance (LSPR) sensors have proven widely useful for studying lipid membrane configurations at solid-liquid interfaces. Key measurement capabilities include distinguishing adsorbed vesicles from supported lipid bilayers (SLBs) as well as profiling the extent of deformation among adsorbed vesicles. Such capabilities rely on detecting geometrical changes in lipid membrane configuration on a length scale that is comparable to the decay length of the LSPR-induced electromagnetic field enhancement (∼5-20 nm). Herein, we report that LSPR sensors are also capable of probing nanoscale (∼1 nm) variations in the distance between SLBs and underlying silica-coated surfaces. By tuning the electrostatic properties of lipid membranes, we could modulate the bilayer-substrate interaction and corresponding separation distance, as verified by simultaneous LSPR and quartz crystal microbalance-dissipation (QCM-D) measurements. Theoretical calculations of the expected variation in the LSPR measurement response agree well with experimental results and support that the LSPR measurement response is sensitive to subtle variations in the bilayer-substrate separation distance.

Nanoplasmonic Biosensor Using Localized Surface Plasmon Resonance Spectroscopy for Biochemical Detection.

Localized surface plasmon resonance (LSPR) associated with metal nanostructures has developed into a highly useful sensor technique. Optical LSPR spectroscopy of nanostructures often shows sharp absorption and scattering peaks, which can be used to probe several bio-molecular interactions. Here, we report nanoplasmonic biosensors using LSPR on nanocup arrays (nanoCA) to recognize bio-molecular binding for biochemical detection. These sensors can be modified to quantify binding of small molecules to proteins for odorant and explosive detections. Electrochemical LSPR biosensors can also be designed by coupling electrochemistry and LSPR spectroscopy measurements. Multiple sensing information can be obtained and electrochemical LSPR property can be investigated for biosensors. In some applications, the electrochemical LSPR biosensor can be used to quantify immunoreactions and enzymatic activity. The biosensors exhibit better performance than those of conventional optical LSPR measurements. With multi-transducers, the nanoplasmonic biosensor can provide a promising approach for bio-detection in environmental monitoring, healthcare diagnostics, and food quality control.

Quantitative Profiling of Nanoscale Liposome Deformation by a Localized Surface Plasmon Resonance Sensor.

Characterizing the shape of sub-100 nm, biological soft-matter particulates (e.g., liposomes and exosomes) adsorbed at a solid-liquid interface remains a challenging task. Here, we introduce a localized surface plasmon resonance (LSPR) sensing approach to quantitatively profile the deformation of nanoscale, fluid-phase 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes contacting a titanium dioxide substrate. Experimental and theoretical results validate that, due to its high sensitivity to the spatial proximity of phospholipid molecules near the sensor surface, the LSPR sensor can discriminate fine differences in the extent of ionic strength-modulated liposome deformation at both low and high surface coverages. By contrast, quartz crystal microbalance-dissipation (QCM-D) measurements performed with equivalent samples were qualitatively sensitive to liposome deformation only at saturation coverage. Control experiments with stiffer, gel-phase 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) liposomes verified that the LSPR measurement discrimination arises from the extent of liposome deformation, while the QCM-D measurements yield a more complex response that is also sensitive to the motion of adsorbed liposomes and coupled solvent along with lateral interactions between liposomes. Collectively, our findings demonstrate the unique measurement capabilities of LSPR sensors in the area of biological surface science, including competitive advantages for probing the shape properties of adsorbed, nanoscale biological particulates.

Multimodal plasmonic biosensing nanostructures prepared by DNA-directed immobilization of multifunctional DNA-gold nanoparticles

Biofunctional multimodal plasmonic nanostructures suitable for multiplexed localized surface plasmon resonance (LSPR) biosensing have been created by DNA-directed immobilization (DDI) of two distinct multifunctional biohybrid gold nanoparticles. Gold nanoparticles (AuNP) of distinct sizes, and therefore showing distinct plasmon resonant peaks (RP), have been biofunctionalized and codified with two different single stranded-DNA (ssDNA) chains. One of these oligonucleotide chains has been specifically designed to direct each AuNP to a distinct location of the surface of a DNA microarray chip through specific hybridization with complementary oligonucleotide strands. Scanning Electron Microscopy (SEM) has been used to demonstrate selective immobilization of each AuNP on distinct spots. The second ssDNA chain of the AuNPs provides the possibility to introduce by hybridization distinct types of bioactive molecules or bioreceptors, on a reversible manner. In this work, hapten-oligonucleotide bioconjugate probes, with sequences complementary to the second ssDNA linked to the AuNP, have been synthesized and used to create multiplexed hapten-biofuncionalized plasmonic nanostructures. The oligonucleotide probes consist on anabolic androgenic steroid haptens (AAS) covalently linked to specifically designed oligonucleotide sequences. The biofunctionality of these plasmonic nanostructures has been demonstrated by fluorescent microarray immunoassay and LSPR measurements, recording the shift of the RP produced after the antibody binding to the corresponding hapten-oligonucleotide probes immobilized on the nanostructured surface. Preliminary data show that this approach could allow manufacturing multifunctional multimodal LSPR chips for multiplexed analysis of different substances reaching very good detectability. Thus, small molecular weigh, analytes such as stanozolol (ST,) could be detected at concentrations in the low nM range. The results here presented open the door for an easy way to construct site-encoded multiplexed multimodal LSPR sensor transducers, combining the DDI strategies with multimodal biohybrid nanoparticles showing distinct optical properties.

Kinetic discrimination of DNA single-base mutations by localized surface plasmon resonance

Clinical application of DNA microarrays used for screening of single nucleotide polymorphisms (SNPs) are very important for diagnosis of diseases and appropriate treatment of patients. In this paper localized surface plasmon resonance (LSPR) technique has been used to study the DNA hybridization process for binary solutions of respectively perfectly matching (PM) and single base mismatching (MM) 93-mer ssDNA from KRAS codon 12. 5′-thiol modified 35-mer ssDNA has been linked to the Au nanodisks array as probe with a surface coverage of 2.8±0.1×1012/cm2. Probe’s binding properties was investigated in details, obtaining a sensitivity down to 10nMand 13nM, respectively for PM and MM, showing that the hybridization process occurs at a lower rate for MM with respect to PM target. The competitive hybridization is accounted for by an inhibition model, where the non-complementary sequences kinetically hinder the hybridization of the perfect matching sequences, owing to their above mentioned affinity constant differences for the same probe. Accordingly, the single nucleotide polymorphisms can therefore be revealed in a single step and label free mode with high sensitivity and specificity by LSPR measurements.

Simultaneous Electrochemical Impedance Spectroscopy and Localized Surface Plasmon Resonance in a Microfluidic Chip: New Insights into the Spatial Origin of the Signal.

A novel flow-through sensor based on electrochemical impedance spectroscopy (EIS) and localized surface plasmon resonance (LSPR) for analyzing biomolecular interactions under flow and static conditions is developed and characterized. The sensor consists of a double-side gold-coated perforated polycarbonate membrane as part of a microfluidic system made of poly(dimethylsiloxane) (PDMS). LSPR and EIS measurements are carried out simultaneously by applying media changes (water to NaCl solutions), unspecific adsorption of bovine serum albumin (BSA), or specific lectin binding on glycopolymer brushes. For BSA binding at the surface, EIS sensor signals mainly contain information from the binding activities at the sensor surface at low frequencies, whereas at high frequencies the change of bulk medium is the main contribution to the EIS signal. Here, the LSPR signal corresponds with EIS signal at high frequency. In contrast, in the case of lectin binding on glycopolymer brushes (3.4 nm thick), where the binding mainly takes place in the brush layer in the vicinity of the surface, LSPR data are correlated with the EIS signals at low frequencies. This leads to the conclusion that the origin of LSPR signals strongly depends on surface coverage and can be specified by simultaneously carrying out EIS measurements.