Local Deposition Research Articles

Influence of polarization curve slope on the accuracy of local copper electrodeposition from sulphate electrolyte

Local electrochemical deposition is an emerging technique, used in the field of additive manufacturing. The advantage of electrochemical additive manufacturing lies in the utilization of room temperature electrolyte and permits to manufacture microscale objects with high precision. The increase in deposition current increases the deposition area, so measures are to be taken to focus the electric field. This work describes the influence of polarization curve slope on the accuracy of local deposition, both experimentally and by computer modelling. The copper was deposited using rotating anode on the surface of stainless steel from sulphate electrolyte. The influence of electrolyte composition on the accuracy of deposition was investigated. The profile of deposited parts was analyzed by profilometry and microscopy. The increased amount of sulfuric acid and presence of the additive in the electrolyte was shown to increase the accuracy of deposition by changing the slope of cathodic polarization curve from 320 to 1100 mA V–1cm–2).

Bilateral localized primary parotid gland amyloidosis: A rare entity with literature review.

Amyloidosis of the salivary glands is a rare occurrence. Due to non-specific clinical presentation, the diagnosis can be overlooked. Here we present a case of a localized bilateral parotid glands AL kappa-light chain amyloid deposition without systemic involvement, as well as a literature review. Fine needle aspiration (FNA) of a right parotid lesion was performed with rapid on-site evaluation (ROSE). Slides showed characteristic amyloid staining with Congo red and typical Apple-green birefringence under polarized light microscopy. Amyloid in the head and neck can be misinterpreted as other materials such as colloid, keratin, necrosis, hyaline degeneration especially when the condition is not suspected.

Numerical Analysis of the Deposition Characteristics in the Initial Deposition Stage in RSC

The coal gasification syngas cooler is important for recovering the sensible heat generated during coal gasification. The ash layer formed on the heat transfer surface can seriously decrease the heat exchange efficiency. Establishing the initial layer is a prerequisite for massive ash deposition and will accelerate the accumulation of the ash and slag particles. In this study, numerical simulations are conducted to analyze the behavior of ash particles in large-scale industrial equipment. The deposition characteristics during the initial fouling and slagging stage in RSC are explored. The results show that in this stage, ash or slag particles mainly stick on the side wall, and only small particles deposit on the upper cone. The surface energy is the dominant factor influencing the composition of the initial layer. The adhesion ratio of FeS2 and ZnS particles is over ten times higher than that of SiO2 particles. With the decrease of the inlet flow rate and the increase of the inlet swirl velocity, the location corresponding to the maximum deposition proportion moves upward, and the local maximum deposition proportion increases.

Fabrication and characterization of alumina-based bilayer dielectric high gradient insulator (DHGI)

High voltage devices suffer from electrical breakdowns that hamper their operation and shorten their lifespan. Such devices are often sealed and operate under vacuum to increase optical transmission and reduce the interaction with ambient gas molecules. The main failure mode in such devices is a surface breakdown. By introduction of a periodic structure of metal-dielectric, known as high gradient insulator (HGI), improved surface breakdown threshold is achieved. Nevertheless, local breakdown damage and metal deposition on the dielectric layers degrade the HGI performance. In this work, we demonstrate the fabrication and characterization of a novel alternative concept where we replace the HGI's metallic layers with high dielectric coefficient ceramic layers. The novel structure which is denoted as DHGI (Dielectric HGI), reshapes the electric field lines in a similar manner to common HGI. A prototype DHGI composed of two layers: (i) Al2O3 and (ii) Al2O3 with 8 wt%. addition of TiO2 co-doped with Al and Nb (TANO), was fabricated by spark plasma sintering (SPS). The dielectric constants of pure alumina and TANO are 10 and ∼104, respectively. It is shown that during sintering, unique intermediate layers are formed at the interface between the two original layers. The microstructure and composition of each layer were characterized. The decreasing TANO content in the intermediate layers induces a gradual decrease of the Al2O3 grain size across the interface. The DHGI prototype was found to have superior breakdown performance compared to conventional pure alumina insulator.

Lamina-specific localization of silicon accumulation in two broadleaf tree species.

Silicon (Si) accumulation differs greatly among plant species, as revealed by an increasing number of studies reporting whole-leaf Si concentration for a wide range of land plants. Yet, we have limited knowledge about Si distribution across leaf parts (e.g., lamina vs. veins) within a leaf of eudicots. Here, we report how Si accumulation with leaf age differs among petiole, midrib, and lamina in two broad-leaved trees, Acer rufinerve and Ficus erecta. We marked a pair of neighboring leaves in each marked shoot and harvested one in May and the other in October to measure Si concentration. In both species, the lamina showed much higher Si concentration than the petiole and vein in both young and old leaves, and only the lamina showed clear increases in Si concentration from young to old leaves. Si accumulation rate correlated positively with shoot size and leaf production in F. erecta but not in A. rufinerve. These results strongly suggest that, in eudicot species, Si is deposited mostly in leaf lamina but in only a negligible amount in petioles and veins through which Si dissolved in water is transported. Future research on physiological regulations of Si accumulation in eudicot species should consider which specific cells in leaf lamina are responsible for such highly localized Si deposition.

Abstracts from The Aerosol Society Drug Delivery to the Lungs 33.

Abstracts from The Aerosol Society Drug Delivery to the Lungs 33.

Optimized Monte Carlo simulations for voxel-based internal dosimetry

Objective. The scientific community has considered internal dosimetry by the Monte Carlo method the gold standard. However, there is a trade-off between simulation processing time and the statistical quality of the results that makes it a challenge to obtain accurate absorbed dose values in some situations, such as dose estimation in organs affected by cross-irradiation or limited computing power. Variance reduction techniques are used to reduce computational processing time without impairing the statistical quality of the results, such as tracking energy cutoff, secondary particle production threshold, and parallelism of different types of emissions from radionuclides. Approach. In this work, GATE Monte Carlo code and its variance reduction techniques were evaluated to calculate S values of organs from the international commission on radiological protection (ICRP) report 110 male phantom for the lutetium-177, iodine-131, yttrium-90, and radium-223 radionuclides. The results are compared with the data from the OpenDose collaboration. Main results. A cutoff of 5 MeV for local electron deposition and 2.0 mm of secondary particle production range resulted in a computational efficiency increase of 7.9 and 1.05 times, respectively. Simulation of ICRP 107 spectra-based source proved to be about 5 times more efficient when compared to a decay simulation using G4RadioactiveDecay (Geant4-based radioactive decay processes). Track length estimator (TLE) and split exponential track length estimator (seTLE) techniques were used to calculate the absorbed dose of photon emissions, resulting in computational efficiency up to 29.4 and 62.5 times higher when compared to traditional simulations, respectively. In particular, the seTLE technique accelerates the simulation time by up to 1426 times, achieving a statistical uncertainty of 10% in volumes affected by cross-irradiation. Significance. The variance reduction techniques used in this work drastically reduced the simulation time and maintained the statistical quality of the calculated absorbed dose values, proving the feasibility of the use of the Monte Carlo method in internal dosimetry under challenging situations and making it viable for clinical routine or web applications.

Antitumor Effect of Bleomycin Nanoaerosol in Murine Carcinoma Model.

Bleomycin, which is widely used as an antitumor agent, possesses serious adverse effects such as pulmonary toxicity. Local nanoaerosol deposition for lung cancer treatment is a promising alternative to drug delivery to lung lesions. The aim of this work is to test the hypothesis that bleomycin nanoaerosol can be effectively used to treat multiple lung metastases. To obtain bleomycin nanoaerosol, an aerosol generator based on electrospray of a solution of a nonvolatile substance with gas-phase neutralization of charged aerosol particles was used. Lung metastases in murine Lewis lung carcinoma and B16 melanoma animal models were counted. The effect of inhaled bleomycin nanoparticles on the number and volume of metastases, as well as pulmonary side effects, was investigated. Using a mouse exposure chamber, the dose-dependent effect of inhaled bleomycin on tumor volume was evaluated in comparison with intraperitoneal administration. Bleomycin nanoaerosol reduced the volume of metastases and produced a higher antitumor effect at much lower doses. It has been established that long-term exposure to nanoaerosol with a low dose of bleomycin is capable of suppressing cancer cell growth. The treatment was well tolerated. In the lungs, minor changes were found in the form of focal-diffuse infiltration of the lung parenchyma.

A Review on Ultrafast Laser Microwelding of Transparent Materials and Transparent Material–Metals

Transparent hard and brittle (THB) materials have generated significant interest due to their excellent properties, such as wide spectral transmittance, heat resistance, chemical inactivity and high mechanical strength. To further explore the application of THB materials, it is inevitable to be confronted with a range of joining THB materials and THB material–metals. Ultrafast (UF) laser microwelding enables a new means of joining THB materials and THB material–metals, due to a localized energy deposition method, which is dominated by nonlinear absorption. This process can realize high-quality micro-zone direct joining of THB materials or THB material–metals without the assistance of a light-absorbing intermediate layer. In this paper, we review the advances in UF laser microwelding of THB materials and THB material–metals considering the last two decades, from the analysis of the interaction mechanism between UF laser and matter to the key influencing factors and practical applications of this technology. Finally, the existing problems and the future research focus of UF laser microwelding technology of THB materials and THB material–metals are discussed.

Understanding Charge-Transfer and Mass-Transfer Effects on Dendrite Growth and Fast Charging of Li Metal Battery

Lithium (Li) metal is facing the challenge of poor cyclic performance and potential safety hazards caused by Li dendrites growth. Herein, the role of charge-transfer and mass-transfer process on dendrite growth and fast charging is illustrated. The effects of charge-transfer coefficient, applied current density, concave-convex structure, and properties of artificial solid electrolyte interphase (SEI) on guiding the Li dendrite growth are investigated via an electrochemical multiphysics model. The charge-transfer coefficient is meaningful for regulating the redox rate of electrode surface. Large applied current density and high ion conductivity of artificial SEI influence the distribution of local deposition rate significantly. Different deposition behaviors are found on concave and convex Li metal surfaces. The convex surface is sensitive than concave surface and is easy to generate Li dendrites under the conditions of high applied current density and high ion conductivity. Moreover, the experimental results can well reflect the influence of dendrite growth and dead Li on the capacity. This study not only provides an essential perspective on designing the artificial SEI for resolving the harmful dendrite issues but also boosts the practical applicability of Li metal battery.

Decidual Stromal Cell Ferroptosis Associated with Abnormal Iron Metabolism Is Implicated in the Pathogenesis of Recurrent Pregnancy Loss.

Iron is necessary for various critical biological processes, but iron overload is also dangerous since labile iron is redox-active and toxic. We found that low serum iron and decidual local iron deposition existed simultaneously in recurrent pregnancy loss (RPL) patients. Mice fed with a low-iron diet (LID) also showed iron deposition in the decidua and adverse pregnancy outcomes. Decreased ferroportin (cellular iron exporter) expression that inhibited the iron export from decidual stromal cells (DSCs) might be the reason for local iron deposition in DSCs from low-serum-iron RPL patients and LID-fed mice. Iron supplementation reduced iron deposition in the decidua of spontaneous abortion models and improved pregnancy outcomes. Local iron overload caused ferroptosis of DSCs by downregulating glutathione (GSH) and glutathione peroxidase 4 levels. Both GSH and cystine (for the synthesis of GSH) supplementation reduced iron-induced lipid reactive oxygen species (ROS) and cell death in DSCs. Ferroptosis inhibitor, cysteine, and GSH supplementation all effectively attenuated DSC ferroptosis and reversed embryo loss in the spontaneous abortion model and LPS-induced abortion model, making ferroptosis mitigation a potential therapeutic target for RPL patients. Further study that improves our understanding of low-serum-iron-induced DSC ferroptosis is needed to inform further clinical evaluations of the safety and efficacy of iron supplementation in women during pregnancy.

Revealing the roles of glycosphingolipid metabolism pathway in the development of keloid: a conjoint analysis of single-cell and machine learning.

Keloid is a pathological scar formed by abnormal wound healing, characterized by the persistence of local inflammation and excessive collagen deposition, where the intensity of inflammation is positively correlated with the size of the scar formation. The pathophysiological mechanisms underlying keloid formation are unclear, and keloid remains a therapeutic challenge in clinical practice. This study is the first to investigate the role of glycosphingolipid (GSL) metabolism pathway in the development of keloid. Single cell sequencing and microarray data were applied to systematically analyze and screen the glycosphingolipid metabolism related genes using differential gene analysis and machine learning algorithms (random forest and support vector machine), and a set of genes, including ARSA,GBA2,SUMF2,GLTP,GALC and HEXB, were finally identified, for which keloid diagnostic model was constructed and immune infiltration profiles were analyzed, demonstrating that this set of genes could serve as a new therapeutic target for keloid. Further unsupervised clustering was performed by using expression profiles of glycosphingolipid metabolism genes to discover keloid subgroups, immune cells, inflammatory factor differences and the main pathways of enrichment between different subgroups were calculated. The single-cell resolution transcriptome landscape concentrated on fibroblasts. By calculating the activity of the GSL metabolism pathway for each fibroblast, we investigated the activity changes of GSL metabolism pathway in fibroblasts using pseudotime trajectory analysis and found that the increased activity of the GSL metabolism pathway was associated with fibroblast differentiation. Subsequent analysis of the cellular communication network revealed the existence of a fibroblast-centered communication regulatory network in keloids and that the activity of the GSL metabolism pathway in fibroblasts has an impact on cellular communication. This contributes to the further understanding of the pathogenesis of keloids. Overall, we provide new insights into the pathophysiological mechanisms of keloids, and our results may provide new ideas for the diagnosis and treatment of keloids.

Aging of pollution air parcels acts as the dominant source for nocturnal HONO

Atmospheric HONO acts as a major source for OH radicals in polluted areas, playing an important role in formation of secondary pollutants. However, the atmospheric HONO sources remain unclear. Here we propose that the heterogeneous reaction of NO2 on aerosols during aging processes acts as the dominant source for nocturnal HONO. Based on the nocturnal variations of HONO and related species in Tai'an city of China, we firstly developed new method to estimate the localized HONO dry deposition velocity (v(HONO)). The estimated v(HONO) of 0–0.077 m/s was in a good agreement with the reported ranges. Additionally, we set up a parametrization to reflect the HONO formation from the aged air parcels based on the variation of HONO/NO2 ratio. The detailed variation of nocturnal HONO could be well reproduced by a complete budget calculation coupled with above parameterizations, with the difference between the observed and calculated HONO levels being <5 %. The results also revealed the average contribution of HONO formation from aged air parcels to atmospheric HONO could achieve to be ~63 % in average.

Revealing alkali metal ions transport mechanism in the atomic channels of Au@α-MnO2

Understanding alkali metal ions' (e.g., Li+/Na+/K+) transport mechanism is challenging but critical to improving the performance of alkali metal batteries. Herein using α-MnO2 nanowires as cathodes, the transport kinetics of Li+/Na+/K+ in the 2 × 2 channels of α-MnO2 with a growth direction of [001] is revealed. We show that ion radius plays a decisive role in determining the ion transport and electrochemistry. Regardless of the ion radii, Li+/Na+/K+ can all go through the 2 × 2 channels of α-MnO2, generating large stress and causing channel merging or opening. However, smaller ions such as Li+ and Na+ cannot only transport along the [001] direction but also migrate along the < 110 > direction to the nanowire surface; for large ion such as K+, diffusion along the < 110 > direction is prohibited. The different ion transport behavior has grand consequences in the electrochemistry of metal oxygen batteries (MOBs). For Li-O2 battery, Li+ transports uniformly to the nanowire surface, forming a uniform layer of oxide; Na+ also transports to the nanowire surface but may be clogged locally due to its larger radius, therefore sporadic pearl-like oxides form on the nanowire surface; K+ cannot transport to the nanowire surface due to its large radius, instead, it breaks the nanowire locally, causing local deposition of potassium oxides. The study provides atomic scale understanding of the alkali metal ion transport mechanism which may be harnessed to improve the performance of MOBs.

TIBIAL CORTEX TRANSVERSE TRANSPORT ACCELERATES WOUND HEALING VIA ENHANCED ANGIOGENESIS AND IMMUNOMODULATION

Treatment for delayed wound healing resulting from peripheral vascular diseases and diabetic foot ulcers remain a challenge. A novel surgical technique named Tibial Cortex Transverse Transport has been developed for treating peripheral ischaemia, with encouraging clinical effects. However, its underlying mechanisms remain unclear. In present study, we aimed to explore the wound healing effects after undergoing this novel technique via multiple ways.A novel rat model of Tibial Cortex Transverse Transport was established with a designed external fixator and effects on wound healing were investigated. All rats were randomized into 3 groups, with 12 rats per group: sham group (negative control), fixator group (positive control) and Tibial Cortex Transverse Transport group. Laser speckle perfusion imaging, vessel perfusion, histology and immunohistochemistry were used to evaluate the wound healing processes.Gross and histological examinations showed that Tibial Cortex Transverse Transport technique accelerated wound closure and enhanced the quality of the newly formed skin tissues. In Tibial Cortex Transverse Transport group, HE staining demonstrated a better epidermis and dermis recovery, while immune-histochemical staining showed that Tibial Cortex Transverse Transport technique promoted local collagen deposition. Tibial Cortex Transverse Transport technique also benefited to angiogenesis and immunomodulation. In Tibial Cortex Transverse Transport group, blood flow in the wound area was higher than that ofother groups according to laser speckle imaging with more blood vessels observed. Enhanced neovascularization was seen in the Tibial Cortex Transverse Transport group with double immune-labelling of CD31 and α-SMA. The M2 macrophages at the wound site in the Tibial Cortex Transverse Transport group was also increased.Tibial cortex transverse transport technique accelerated wound healing through enhanced angiogenesis and immunomodulation.

In Situ Sputtering From the Micromanipulator to Enable Cryogenic Preparation of Specimens for Atom Probe Tomography by Focused-Ion Beam.

Workflows have been developed in the past decade to enable atom probe tomography analysis at cryogenic temperatures. The inability to control the local deposition of the metallic precursor from the gas-injection system (GIS) at cryogenic temperatures makes the preparation of site-specific specimens by using lift-out extremely challenging in the focused-ion beam. Schreiber et al. exploited redeposition to weld the lifted-out sample to a support. Here, we build on their approach to attach the region-of-interest and additionally strengthen the interface with locally sputtered metal from the micromanipulator. Following standard focused-ion beam annular milling, we demonstrate atom probe analysis of Si in both laser pulsing and voltage mode, with comparable analytical performance as a presharpened microtip coupon. Our welding approach is versatile, as various metals could be used for sputtering, and allows similar flexibility as the GIS in principle.

Ultrathin Li-rich Li-Cu alloy anode capped with lithiophilic LiC6 headspace enabling stable cyclic performance

Li-rich dual-phase Li-Cu alloy is a promising candidate toward practical application of Li metal anode due to its in situ formed unique three-dimensional (3D) skeleton of electrochemical inert LiCux solid-solution phase. Since a thin layer of metallic Li phase appears on the surface of as-prepared Li-Cu alloy, the LiCux framework cannot regulate Li deposition efficiently in the first Li plating process. Herein, a lithiophilic LiC6 headspace is capped on the upper surface of the Li-Cu alloy, which can not only offer free space to accommodate Li deposition and maintain dimensional stability of the anode, but also provide abundant lithiophilic sites and guide Li deposition effectively. This unique bilayer architecture is fabricated via a facile thermal infiltration method, where the Li-Cu alloy layer with an ultrathin thickness around 40 μm occupies the bottom of a carbon paper (CP) sheet, and the upper part of this 3D porous framework is reserved as the headspace for Li storage. Notably, the molten Li can quickly convert these carbon fibers of the CP into lithiophilic LiC6 fibers while the CP is touched with the liquid Li. The synergetic effect between the LiC6 fibers framework and LiCux nanowires scaffold can ensure a uniform local electric field and stable Li metal deposition during cycling. As a consequence, the CP capped ultrathin Li-Cu alloy anode demonstrates excellent cycling stability and rate capability.

Filament Growth and Related Instabilities during Adsorbate Suppressed Electrodeposition

Anisotropic growth of a single filament on a microelectrode is demonstrated by galvanostatic electrodeposition in a bistable passive-active critical system. Specifically, a Cu filament is formed by disruption of a passivating polyether-halide bilayer triggered by metal deposition with positive feedback guiding highly localized deposition. For macroscale electrodes, complex passive-active Turing patterns develop, while for micrometer-sized electrodes, bifurcation is frustrated and a single active zone develops, which is reinforced by hemispherical transport. As deposition proceeds, hemispherical symmetry is broken with lateral propagation of a single filament while an increasing fraction of the applied current supports expansion of the passive sidewall area that eventually leads to termination of anisotropic growth. Different polyether suppressors alter the dynamic range between passive and active growth that determines the shape and extent of filament formation. The impact of electrode area, geometry, and applied current on morphological evolution was also briefly examined. The results highlight the utility of appropriately scaled microelectrodes in the study of growth instabilities during breakdown of additive suppressed layers in critical electrodeposition systems.

Built-up edge formation and flank wear evolution in conventional machining of AZ91 magnesium alloy

Magnesium alloys are largely desirable in numerous industries today because of their intrinsically attractive properties. Low density and high strength coupled with significant biocompatibility are the main advantages. Machining of magnesium alloys is challenging as a result of the persistent chip ignition risk as well as material build-up on the tool due to their softness. Therefore, magnesium alloys’ machinability has not been fully assessed in the available literature. The present work aims to address this aperture by assessing flank wear progression and the prevalence of adhesion-driven built-up edge (BUE) and built-up layer (BUL) in different tool coating materials during the dry short-interval conventional orthogonal turning of AZ91 magnesium alloy. A higher and lower combination of feed rates and cutting speeds were utilized for all tools to compare the possible range of maximum flank wear land width, average flank wear land width, and chip contact length while capturing and assessing said parameters through digital and optical microscopy. The data presented a large prevalence of adhesion wear across all tool coating types which is portrayed by the cyclic behaviour of the flank wear land width plots, which resulted from the repeated accumulation and wear of deposited workpiece material. The TiCN-coated tool presented the least amounts of BUL and BUE throughout both levels of testing, while the TiN-coated tool presented the largest amounts of average flank wear land width due to recurrent aberrative local deposition accumulation and extended streak line depositions. TiN-coated, Al2O3-coated, and uncoated tools presented higher average flank wear land width than the TiCN-coated tool by 8.5%, 3.1%, and 27.2% during level 1 cutting conditions and 84.8%, 21.3%, and 37.2% during level 2 cutting conditions. This implies the TiCN coating's increased resistance to elevated cutting temperatures, and in turn, reduced deposition of material through adhesion.

Voxel-S-Value based 3D treatment planning methods for Y-90 microspheres radioembolization based on Tc-99m-macroaggregated albumin SPECT/CT

Partition model (PM) for Y-90 microsphere radioembolization is limited in providing 3D dosimetrics. Voxel-S-Values (VSV) method has good agreement with Monte Carlo (MC) simulations for 3D absorbed dose conversion. We propose a new VSV method and compare its performance along with PM, MC and other VSV methods for Y-90 RE treatment planning based on Tc-99m MAA SPECT/CT. Twenty Tc-99m-MAA SPECT/CT patient data are retrospectively analyzed. Seven VSV methods are implemented: (1) local energy deposition; (2) liver kernel; (3) liver kernel and lung kernel; (4) liver kernel with density correction (LiKD); (5) liver kernel with center voxel scaling (LiCK); (6) liver kernel and lung kernel with density correction (LiLuKD); (7) proposed liver kernel with center voxel scaling and lung kernel with density correction (LiCKLuKD). Mean absorbed dose and maximum injected activity (MIA) obtained by PM and VSV are evaluated against MC results, and 3D dosimetrics generated by VSV are compared with MC. LiKD, LiCK, LiLuKD and LiCKLuKD have the smallest deviation in normal liver and tumors. LiLuKD and LiCKLuKD have the best performance in lungs. MIAs are similar by all methods. LiCKLuKD could provide MIA consistent with PM, and precise 3D dosimetrics for Y-90 RE treatment planning.