Local Deposition Efficiency Research Articles

Numerical modelling of micron particle inhalation in a realistic nasal airway with pediatric adenoid hypertrophy: A virtual comparison between pre- and postoperative models.

Adenoid hypertrophy (AH) is an obstructive condition due to enlarged adenoids, causing mouth breathing, nasal blockage, snoring and/or restless sleep. While reliable diagnostic techniques, such as lateral soft tissue x-ray imaging or flexible nasopharyngoscopy, have been widely adopted in general practice, the actual impact of airway obstruction on nasal airflow and inhalation exposure to drug aerosols remains largely unknown. In this study, the effects of adenoid hypertrophy on airflow and micron particle inhalation exposure characteristics were analysed by virtually comparing pre- and postoperative models based on a realistic 3-year-old nasal airway with AH. More specifically, detailed comparison focused on anatomical shape variations, overall airflow and olfactory ventilation, associated particle deposition in overall and local regions were conducted. Our results indicate that the enlarged adenoid tissue can significantly alter the airflow fields. By virtually removing the enlarged tissue and restoring the airway, peak velocity and wall shear stress were restored, and olfactory ventilation was considerably improved (with a 16∼63% improvement in terms of local ventilation speed). Furthermore, particle deposition results revealed that nasal airway with AH exhibits higher particle filtration tendency with densely packed deposition hot spots being observed along the floor region and enlarged adenoid tissue area. While for the postoperative model, the deposition curve was shifted to the right. The local deposition efficiency results demonstrated that more particles with larger inertia can be delivered to the targeted affected area following Adenoidectomy (Adenoid Removal). Research findings are expected to provide scientific evidence for adenoidectomy planning and aerosol therapy following Adenoidectomy, which can substantially improve present clinical treatment outcomes.

직렬로 배열된 두 원형 실린더 주위를 지나는 입자가 포함된 유동

Numerical simulations are performed for particle-laden flow around two circular cylinders in tandem arrangements. The present study aims to understand the effects of cylinder spacing and particle size on particle dispersion and deposition characteristics. We consider the Reynolds number of 100 at which vortex shedding takes place, and the density ratio of particle to fluid is fixed as 1,000. For a parametric study, we vary the Stokes number from 0.1 to 10 for the center-to-center spacing of 2D, 3D, and 4D, where D is the cylinder diameter. As the spacing decreases from 4D to 2D, vortex shedding becomes weaker and lift fluctuations are reduced, agreeing well with the previous results. The dispersion pattern of particles around the cylinder changes significantly depending on the spacing. The overall deposition efficiency of the upstream cylinder is very similar to that of a single cylinder. However, the efficiency of the downstream cylinder has much smaller values with a strong dependency on the spacing. The local deposition efficiency and the deposition location are also analyzed in detail.

Determination of local deposition efficiency based on in-flight particle diagnostics in plasma spraying

Increasing the deposition efficiency (DE) and consequently reducing the manufacturing costs has been always one of the central goals in thermal spraying. Hence, the effect of modifying various spraying parameters on DE has been widely investigated in the literature. However, there has not been a methodology so far to correlate the in-flight particle properties with their DE on the substrate locally. In this study, a method is developed to determine the local deposition efficiency (LDE) of the plasma spraying process based on optical particle diagnostics of the in-flight particles. To this end, the entire free-jet transverse section is divided into several non-overlapping focal planes and the size and velocity of the particles are measured at these focal planes. Furthermore, the in-flight particle temperatures are captured in a measurement grid normal to the gun axis. The experiments are conducted with alumina spray powder and a three-cathode plasma gun. The LDE is calculated based on the spatial distribution of the in-flight particle mass flow rate (PMFR) and the local deposited mass on the substrate. Subsequently, the interdependencies between the in-flight particle properties and the calculated LDE are investigated using a nonlinear regression model.

Numerical study on abnormal airflow patterns and particle deposition characteristics in the realistic HUA model with pharyngeal obstruction

The effects of morphological variation of pharynx on abnormal airflow patterns and particle deposition characteristics in the realistic OSA HUA model with pharyngeal obstruction are numerically studied using the LES-DPM. Firstly, the LDA measurements on airflow patterns in the HUA model are executed to verify the reliability of LES, and the numerical simulations on particle deposition behaviors in a simplified human throat are conducted to validate the reliability of DPM. Afterwards, the airflow patterns, including velocity field, pressure field and shear stress field, and the regional/total particle deposition features with various particle sizes (0.5–10 μm) at different respiration intensities (16.8–60 L/min) inside HUA model are examined. The fitting formula among total deposition efficiency, particle size and respiratory intensity is eventually established. The results lead to the following conclusions: (1) The morphological variation of pharynx significantly affects the abnormal airflow patterns and particle deposition features. Pharyngeal obstruction not only induces abnormal high intensity of turbulent flow, negative pressure and positive shear stress, but also causes abnormal high local deposition efficiency in the nasal cavity and larynx. (2) The enhancement of respiration intensity greatly aggravates the abnormal airflow patterns. With the increasing of respiration intensity, the jet-flow, reversed-flow, negative pressure and positive shear stress all noticeably strengthen. Rapid medical diagnosis on airway operation can be realized by judging the maximal negative pressure and positive shear stress. (3) The increments of both particle size and respiration intensity evidently augment the abnormal particle deposition features. With the rising of particle size and respiration intensity, the total particle deposition efficiencies obviously improve. However, inertial impaction is the essential mechanism for abnormal deposition characteristics, which is more important than that of turbulence intensity. This work not only would help to understand the pathophysiology of OSA disease, but also would assess both the health impacts of inhaled particles and the therapeutic efficacy of inhaled drug aerosols in the airways of OSA patients.

Experimental Measurements of Regional Lung Deposition in Taiwanese

ABSTRACT Inhalation is the most important route of entry for aerosol particles. Deposition in the respiratory tract is affected by many factors, such as particle size, shape, charge, density, breathing pattern and physical tract structure. However, most of the currently available lung deposition data are on Caucasians, with very limited data on Taiwanese. Therefore, it is essential to clarify whether there is a significant difference in respiratory tract deposition between Caucasian and Taiwanese individuals. This work is thus aimed at characterizing regional lung deposition in Taiwanese. A rapid method of measuring regional lung deposition was employed in the present study. The experimental system consisted of an aerosol chamber, a mouthpiece, a pneumotachograph flow meter, and a particle counter. A cylinder-piston type breathing machine was used to generate a series of “standard” breathing patterns for subjects to follow. In addition to oral breathing, nasal breathing was also conducted. A special respirator was employed to facilitate measurements of the nasal route deposition. The regional lung deposition data obtained in this work showed good agreement with previous studies based on the bolus technique, indicating that the difference in lung deposition between Taiwanese and Caucasian individuals is negligible. The local deposition efficiency increased with the penetration volume. This increased trend was particularly prominent in the deep lungs, which was likely due to the dilution effect caused by the relatively clean air in the functional residual capacity. When a fixed fraction of the forced vital capacity was used to replace the fixed tidal volume, the total lung deposition became less dependent on the tidal volume. Primarily due to nostril hairs and the complex configuration of the nasal turbinate, the local deposition efficiency of the nasal route was higher than that of the oral route but only in the early stage of penetration (200 mL).

Numerical simulations of targeted delivery of magnetic drug aerosols in the human upper and central respiratory system: a validation study.

In the present study, we investigate the concept of the targeted delivery of pharmaceutical drug aerosols in an anatomically realistic geometry of the human upper and central respiratory system. The geometry considered extends from the mouth inlet to the eighth generation of the bronchial bifurcations and is identical to the phantom model used in the experimental studies of Banko et al. (2015 Exp. Fluids 56, 1–12 (doi:10.1007/s00348-015-1966-y)). In our computer simulations, we combine the transitional Reynolds-averaged Navier–Stokes (RANS) and the wall-resolved large eddy simulation (LES) methods for the air phase with the Lagrangian approach for the particulate (aerosol) phase. We validated simulations against recently obtained magnetic resonance velocimetry measurements of Banko et al. (2015 Exp. Fluids 56, 1–12. (doi:10.1007/s00348-015-1966-y)) that provide a full three-dimensional mean velocity field for steady inspiratory conditions. Both approaches produced good agreement with experiments, and the transitional RANS approach is selected for the multiphase simulations of aerosols transport, because of significantly lower computational costs. The local and total deposition efficiency are calculated for different classes of pharmaceutical particles (in the 0.1 μm≤dp≤10 μm range) without and with a paramagnetic core (the shell–core particles). For the latter, an external magnetic field is imposed. The source of the imposed magnetic field was placed in the proximity of the first bronchial bifurcation. We demonstrated that both total and local depositions of aerosols at targeted locations can be significantly increased by an applied magnetization force. This finding confirms the possible potential for further advancement of the magnetic drug targeting technique for more efficient treatments for respiratory diseases.

Subject-variability effects on micron particle deposition in human nasal cavities

Validated computer simulations of the airflow and particle dynamics in human nasal cavities are important for local, segmental and total deposition predictions of both inhaled toxic and therapeutic particles. Considering three, quite different subject-specific nasal airway configurations, micron-particle transport and deposition for low-to-medium flow rates have been analyzed. Of special interest was the olfactory region from which deposited drugs could readily migrate to the central nervous system for effective treatment. A secondary objective was the development of a new dimensionless group with which total particle deposition efficiency curves are very similar for all airway models, i.e., greatly reducing the impact of intersubject variability. Assuming dilute particle suspensions with inhalation flow rates ranging from 7.5 to 20L/min, the airflow and particle-trajectory equations were solved in parallel with the in-house, multi-purpose Alya program at the Barcelona Supercomputing Center. The geometrically complex nasal airways generated intriguing airflow fields where the three subject models exhibit among them both similar as well as diverse flow structures and wall shear stress distributions, all related to the coupled particle transport and deposition. Nevertheless, with the new Stokes-Reynolds-number group, Stk1.23Re1.28, the total deposition-efficiency curves for all three subjects and flow rates almost collapsed to a single function. However, local particle deposition efficiencies differed significantly for the three subjects when using particle diameters dp = 2, 10, and 20μm. Only one of the three subject-specific olfactory regions received, at relatively high values of the inertial parameter dp2Q, some inhaled microspheres. Clearly, for drug delivery to the brain via the olfactory region, a new method of directional inhalation of nanoparticles would have to be implemented.

Modelling of deposition and erosion of injected WF6 and MoF6 in TEXTOR

Tracer injection experiments in TEXTOR with MoF6 and WF6 lead to local deposition of about 6% for Mo and about 1% for W relative to the injected amount of Mo and W atoms. Modelling of these experiments has been done with ERO applying updated data for physical sputtering. The dissociation of the injected molecules has been treated in a simplified manner due to the lack of dissociation rate coefficients. However, with this it was possible to reproduce the observed radial penetration of Mo and W atoms into the plasma. The modelled local deposition efficiencies are about 50% for Mo and 60% for W assuming typical plasma parameters for the experimental conditions used. To reproduce the measured deposition efficiencies an enhancement factor for the erosion of deposited Mo and W has to be assumed (∼10 for Mo and ∼25 for W). Due to the rather low electron temperature Te of these plasma conditions (Te∼15eV at the location of injection), Mo and W are mostly sputtered by impurities whereas sputtering due to deuterium is negligible. A parameter study applying larger electron temperature leads to increased sputtering and thus to reduced local deposition efficiencies of about 30% for Mo and 5% for W. Though, even under these conditions enhanced erosion, albeit with reduced enhancement factors, is needed in the modelling to obtain the small measured deposition efficiencies.

An AeroCom assessment of black carbon in Arctic snow and sea ice

Abstract. Though many global aerosols models prognose surface deposition, only a few models have been used to directly simulate the radiative effect from black carbon (BC) deposition to snow and sea ice. Here, we apply aerosol deposition fields from 25 models contributing to two phases of the Aerosol Comparisons between Observations and Models (AeroCom) project to simulate and evaluate within-snow BC concentrations and radiative effect in the Arctic. We accomplish this by driving the offline land and sea ice components of the Community Earth System Model with different deposition fields and meteorological conditions from 2004 to 2009, during which an extensive field campaign of BC measurements in Arctic snow occurred. We find that models generally underestimate BC concentrations in snow in northern Russia and Norway, while overestimating BC amounts elsewhere in the Arctic. Although simulated BC distributions in snow are poorly correlated with measurements, mean values are reasonable. The multi-model mean (range) bias in BC concentrations, sampled over the same grid cells, snow depths, and months of measurements, are −4.4 (−13.2 to +10.7) ng g−1 for an earlier phase of AeroCom models (phase I), and +4.1 (−13.0 to +21.4) ng g−1 for a more recent phase of AeroCom models (phase II), compared to the observational mean of 19.2 ng g−1. Factors determining model BC concentrations in Arctic snow include Arctic BC emissions, transport of extra-Arctic aerosols, precipitation, deposition efficiency of aerosols within the Arctic, and meltwater removal of particles in snow. Sensitivity studies show that the model–measurement evaluation is only weakly affected by meltwater scavenging efficiency because most measurements were conducted in non-melting snow. The Arctic (60–90° N) atmospheric residence time for BC in phase II models ranges from 3.7 to 23.2 days, implying large inter-model variation in local BC deposition efficiency. Combined with the fact that most Arctic BC deposition originates from extra-Arctic emissions, these results suggest that aerosol removal processes are a leading source of variation in model performance. The multi-model mean (full range) of Arctic radiative effect from BC in snow is 0.15 (0.07–0.25) W m−2 and 0.18 (0.06–0.28) W m−2 in phase I and phase II models, respectively. After correcting for model biases relative to observed BC concentrations in different regions of the Arctic, we obtain a multi-model mean Arctic radiative effect of 0.17 W m−2 for the combined AeroCom ensembles. Finally, there is a high correlation between modeled BC concentrations sampled over the observational sites and the Arctic as a whole, indicating that the field campaign provided a reasonable sample of the Arctic.

Healthy environment — indoor air quality of Brazilian elementary schools nearby petrochemical industry

The mitigation of pollution released to the environment originating from the industrial sector has been the aim of all policy-makers and its importance is evident if the adverse health effects on the world population are considered. Although this concern is controversial, petroleum refinery has been linked to some adverse health effects for people living nearby. Apart from home, school is the most important indoor environment for children and there is increasing concern about the school environment and its impact on health, also in developing countries where the prevalence of pollution is higher. As most of the children spend more than 40% of their time in schools, it is critical to evaluate the pollution level in such environment. In the metropolitan region of Curitiba, South Brazil, five schools nearby industries and highways with high density traffic, were selected to characterize the aerosol and gaseous compounds indoor and outdoor of the classrooms, during 2009–2011. Size segregated aerosol samples were collected for analyses of bulk and single particle elemental profiles. They were analyzed by electron probe X-ray micro-analysis (EPXMA), and by energy-dispersive X-ray fluorescence (EDXRF), to investigate the elemental composition of individual particles and bulk samples. The concentrations of benzene, toluene, ethylbenzene, and xylene (BTEX); NO2; SO2; acetic acid; and formic acid were assessed indoor and outdoor using passive diffusion tubes. BTEX were analyzed by GC–MS and other collected gasses by ion chromatography. Individual exposition of BTEX was assessed by personal passive diffusion tubes. Results are interpreted separately and as a whole with the specific aim of identifying compounds that could affect the health of the scholars. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the children's respiratory systems were calculated, revealing the deposition of particles at extrathoracic, tracheobronchial and pulmonary levels.

Remplacer la cellule β

The mitigation of pollution released to the environment originating from the industrial sector has been the aim of all policy-makers and its importance is evident if the adverse health effects on the world population are considered. Although this concern is controversial, petroleum refinery has been linked to some adverse health effects for people living nearby. Apart from home, school is the most important indoor environment for children and there is increasing concern about the school environment and its impact on health, also in developing countries where the prevalence of pollution is higher. As most of the children spend more than 40% of their time in schools, it is critical to evaluate the pollution level in such environment. In the metropolitan region of Curitiba, South Brazil, five schools nearby industries and highways with high density traffic, were selected to characterize the aerosol and gaseous compounds indoor and outdoor of the classrooms, during 2009–2011. Size segregated aerosol samples were collected for analyses of bulk and single particle elemental profiles. They were analyzed by electron probe X-ray micro-analysis (EPXMA), and by energy-dispersive X-ray fluorescence (EDXRF), to investigate the elemental composition of individual particles and bulk samples. The concentrations of benzene, toluene, ethylbenzene, and xylene (BTEX); NO2; SO2; acetic acid; and formic acid were assessed indoor and outdoor using passive diffusion tubes. BTEX were analyzed by GC–MS and other collected gasses by ion chromatography. Individual exposition of BTEX was assessed by personal passive diffusion tubes. Results are interpreted separately and as a whole with the specific aim of identifying compounds that could affect the health of the scholars. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the children's respiratory systems were calculated, revealing the deposition of particles at extrathoracic, tracheobronchial and pulmonary levels.

A Sampling Train for Rapid Measurement of Regional Lung Deposition

An experimental system for rapid measurement of regional lung deposition of Di-2-ethylhexyl sebacate (DEHS) aerosol particles was established in the present study. The principal goal was to identify the most relevant components of the sampling train and the proper instruments to be employed. After completing the search for an optimal sampling train and instruments, a human subject test was performed. Overall, the sampling train consisted of a mouthpiece, flow meter, and particle counter. The mouthpiece was attached to a Fleisch pneumotachograph. Several TSI condensation particle counters (CPCs), a PC-LabCard and a personal computer were employed to measure and record the counts of test particles at 100 Hz. A cylinder-piston breathing machine was built to generate a series of “standard” breathing patterns. For non-human subject tests, an acrylic tube, 5 cm diameter × 60 cm length, packed with a piece of 100 ppi foam disks was used as a substitute for the human respiratory tract. The optimal sampling train was determined to be a 1TH Fleisch pneumotachograph with a CPC model 3025A because of its short response time and low flow fluctuation. A healthy non-smoking man volunteered to be the subject, and was asked to follow breathing patterns generated by a cylinder-piston breathing machine. The local deposition efficiency was calculated for 1 μm DEHS particles of each 50 cm 3 volumetric region. The deposition data showed a good agreement with previous studies. Compared to the conventional bolus system, the advantage of the rapid measurement system developed in this work is its simplicity, low exposure, and high efficiency.

Simulations of magnetic capturing of drug carriers in the brain vascular system

The present paper reports on numerical simulations of blood flow and magnetic drug carrier distributions in a complex brain vascular system. The blood is represented as a non-Newtonian fluid by the generalised power law. The Lagrangian tracking of the double-layer spherical particles is performed to estimate particle deposition under influence of imposed magnetic field gradients across arterial walls. Two situations are considered: neutral (magnetic field off) and active control (magnetic field on) case. The double-layer spherical particles that mimic a real medical drug are characterised by two characteristic diameters - the outer one and the inner one of the magnetic core. A numerical mesh of the brain vascular system consisting of multi-branching arteries is generated from raw MRI scan images of a patient. The blood is supplied through four main inlet arteries and the entire vascular system includes more than 30 outlets, which are modelled by Murray’s law. The no-slip boundary condition is applied for velocity components along the smooth and rigid arterial walls. Numerical simulations revealed detailed insights into blood flow patterns, wall-shear-stress and local particle deposition efficiency along arterial walls. It is demonstrated that magnetically targeted drug delivery significantly increased the particle capturing efficiency in the pre-defined regions. This feature can be potentially useful for localised, non-invasive treatment of brain tumours.

Particle inhalation and deposition in a human nasal cavity from the external surrounding environment

CFD computations of particle flows in a human nasal cavity were conducted, using two types of inlet velocity profiles at the nostril openings respectively. One type is the widely used uniform inlet velocity profile while the other is a realistic inlet velocity profile extracted from the external environment that is influenced by facial features. The latter type of inlet velocity profiles were obtained through CFD computations of indoor gas-particle flows around a human head geometry containing detailed facial features in an enclosed space. Comparisons were made between the predicted results of airflow field, particle tracks and particle deposition efficiency in the nasal cavity. It was revealed that although the effects of facial features exist only in a small region (10–20 mm) in front of the face, they lead to complicated, and non-uniform velocity profiles at the nostril openings. This discrepancy leads to different predictions of airflow fields and local particle deposition efficiency in the nasal cavity, especially in the anterior regions such as the vestibule and nasal valve. The results may further lead to discrepant health-risk assessments associated with particle inhalation. Therefore, for CFD simulations of particle deposition in the nasal cavity, the inlet velocity profiles induced by facial features are important for more realistic results.

Deposition and re-erosion studies by means of local impurity injection in TEXTOR

Pioneering experiments to study local erosion and deposition processes have been carried out in TEXTOR by injecting 13C marked hydrocarbons (CH4 and C2H4) as well as silane (SiD4) and tungsten-hexafluoride (WF6) through test limiters exposed to the edge plasma. The influence of various limiter materials (C, W, Mo) and surface roughness, different geometries (spherical or roof-like) and local plasma parameters has been studied. Depending on these conditions the local deposition efficiency of injected species varies between 0.1% and 9% – the largest deposition has been found for 13CH4 injection through unpolished, spherical C test limiter and ohmic plasma conditions. The most striking result is that ERO modelling cannot reproduce these low deposition efficiencies using the common assumptions on sticking probabilities and physical and chemical re-erosion yields. As an explanation large re-erosion due to background plasma and possibly low “effective sticking” of returning species is applied. This has been interpreted as enhanced re-erosion of re-deposits under simultaneous impact of high ion fluxes from plasma background.

Modelling of local carbon deposition from methane and ethene injection through graphite and tungsten test limiters in TEXTOR

The 3D Monte Carlo code ERO has been used to simulate dedicated TEXTOR experiments in which methane 13CH4 and ethene 13C2H4 were injected into the plasma through graphite and tungsten spherical limiters to investigate local carbon transport and deposition. Spectroscopy was used to follow the observable hydrocarbon break-up products, and the local 13C deposition efficiency was measured by post-mortem surface analysis. The experimental observations showing the dependence of the 13C deposition on substrate and gas have been modelled. The main uncertain input parameters for the modelling, as 12C concentration in the background plasma, effective sticking coefficient for hydrocarbons and enhanced erosion of redeposited carbon, have been defined by benchmarking between modelling and experiment. With the same set of parameters, the modelled 13C deposition efficiencies are in good agreement with the experimental ones (0.8–2.1%). Also, the observed distribution of 13C deposition on the limiter surfaces is well reproduced by modelling. The higher amount of 13C deposition on graphite compared with tungsten limiter is mainly due to the higher reflection of carbon on tungsten and the higher physical sputtering of carbon film on top of the tungsten compared with graphite. The larger amount of 13C deposition for 13C2H4 instead of 13CH4 injection can be explained by more 13C returning to the limiter surface from 13C2H4 injection than 13CH4 injection, which is mainly determined by the different masses and reaction rate coefficients.

Inhable particulate matter from lime industries: Chemical composition and deposition in human respiratory tract

Air pollution caused by the lime production industry has become a serious problem with potential effects to human health, especially in developing countries. Colombo is a city included in the Metropolitan Region of Curitiba (capital of Paraná State) in South Brazil. In Colombo city, a correlation has been shown between the lime production and the number of persons who need respiratory treatment in a local hospital, indicating that the lime industry can cause deleterious health effects in the exposed workers and population. This research was conducted to deal firstly with the characterization of the size distribution and chemical compositions of particles emitted from lime manufacturing and subsequently to assess the deposition rate of inhaled dolomitic lime aerosol particles in the human respiratory tract. The elemental chemical composition and particle size of individual atmospheric particles was quantitatively elucidated, including low-Z components like C, N and O, as well as higher-Z elements, using automated electron probe microanalysis. Information concerning the bulk composition is provided by energy-dispersive X-ray detection. The majority of the respirable particulate matter identified was composed of aluminosilicates, Ca–Mg oxides, carbon-rich particles, mixtures of organic particles and Ca–Mg carbonates, soot and biogenic particles. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the human respiratory system were calculated, revealing the deposition of CaO·MgO at extrathoracic, tracheobronchial and pulmonary levels. The results of this study offer evidence to the threat of the fine and coarse particles emitted from dolomite lime manufacturing, allowing policy-makers to better focus their mitigation strategies in an effective way, as well as to the dolomite producers for the purpose of designing and/or implementing improved emission controls.

Particulate matter analysis at elementary schools in Curitiba, Brazil

The particulate matter indoors and outdoors of the classrooms at two schools in Curitiba, Brazil, was characterised in order to assess the indoor air quality. Information concerning the bulk composition was provided by energy-dispersive x-ray fluorescence (EDXRF). From the calculated indoor/outdoor ratios and the enrichment factors it was observed that S-, Cl- and Zn-rich particles are of concern in the indoor environment. In the present research, the chemical compositions of individual particles were quantitatively elucidated, including low-Z components like C, N and O, as well as higher-Z elements, using automated electron probe microanalysis low Z EPMA. Samples were further analysed for chemical and morphological aspects, determining the particle size distribution and classifying them according to elemental composition associations. Five classes were identified based on major elemental concentrations: aluminosilicate, soot, organic, calcium carbonate and iron-rich particles. The majority of the respirable particulate matter found inside of the classroom was composed of soot, biogenic and aluminosilicate particles. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the human respiratory system were calculated revealing the deposition of soot at alveolar level. The results showed that on average 42% of coarse particles are deposited at the extrathoracic level, whereas 24% are deposited at the pulmonary region. The fine fraction showed a deposition rate of approximately 18% for both deposition levels.

Combined inertial and gravitational deposition of microparticles in small model airways of a human respiratory system

Focusing on relatively small airways in terms of the medium-size bronchial generations G6–G9, the interplay of impaction and sedimentation on micron particle transport and deposition has been simulated. A commercial finite-volume code, enhanced with user-supplied programs, has been employed. Although impaction is still a dominant deposition mechanism for microparticle in medium-size airways under normal breathing conditions (say, Q in = 15 – 30 L / min ), sedimentation may play a role as well. In turn, that can influence the local particle deposition patterns, efficiencies and fractions for a realistic range of Stokes numbers ( 0.001 ⩽ St ⩽ 0.33 ) . However, deposition due to sedimentation is significantly amplified during slow inhalation; for example, the gravitational deposition may become dominant in the ninth bifurcation (i.e., generations G8–G9) for relatively large microparticles (say, d p > 5 μ m ) at Q in = 3.75 L / min . The occurrence of sedimentation changes the location of the deposition “hot spots” and reduces the order of the maximum deposition enhancement factor. The use of analytical formulas based on inclined tube models for predicting gravitational deposition in local bronchial airway segments as well as the combination of deposition by sedimentation and impaction has to be carefully examined. As shown, more prudent is the use of curve-fitted correlations generated from experimentally validated computer simulation results as a function of Stokes number and sedimentation parameter.

Flow and Particle Deposition Patterns in a Realistic Human Double Bifurcation Airway Model

Velocity profiles, local deposition efficiencies (DE), and deposition patterns of aerosol particles in the first three generations (i.e., double bifurcations) of an airway model have been simulated numerically, in which the airway model was constructed from computed tomography (CT) scan data of real human tracheobronchial airways. Three steady inhalation conditions, 15, 30, and 60 L/min, were simulated and a range of micrometer particle sizes (1–20 μm diameter) were injected into the model. Results were then compared with experimental and other numerical results which had employed either similar model geometry or test conditions. The effects of inhalation conditions on velocity profiles and particle deposition were studied. The data indicated that the local deposition efficiencies in the first bifurcation increased with a rise in the Stokes number (St) within St range from 0.0004 to 0.7. Within the same St range, DE in the second bifurcations (both left and right) was dropped dramatically after St increased to 0.17. Also, the second bifurcation in the right side (B2.1, closer to first bifurcation than left side, B2.2) was found to show a much higher (almost double) DE than the left side. This may be due to the fact that the left main bronchus is longer and has greater angulation than the right main bronchus. Generally, the present simulation using a computational fluid dynamic (CFD) technique obtained concurrent results with subtle differences compared to other works. However, due to omission of larynx in the model, which is known to significantly modify airflow and hence particle deposition, the present model may only serve as the “stepping stone” to simulating and analyzing dose-response or inhalation risk assessment visually for clinical researchers.