Loading Of Gold Nanoparticles Research Articles

Protein Cage Directed Assembly of Binary Nanoparticle Superlattices.

Inorganic nanoparticles can be assembled into superlattices with unique optical and magnetic properties arising from collective behavior. Protein cages can be utilized to guide this assembly by encapsulating nanoparticles and promoting their assembly into ordered structures. However, creating ordered multi-component structures with different protein cage types and sizes remains a challenge. Here, the co-crystallization of two different protein cages (cowpea chlorotic mottle virus and ferritin) characterized by opposing surface charges and unequal diameter is shown. Precise tuning of the electrostatic attraction between the cages enabled the preparation of binary crystals with dimensions up to several tens of micrometers. Additionally, binary metal nanoparticle superlattices are achieved by loading gold and iron oxide nanoparticles inside the cavities of the protein cages. The resulting structure adopts an AB2 FCC configuration that also impacts the dipolar coupling between the particles and hence the optical properties of the crystals, providing key insight for the future preparation of plasmonic and magnetic nanoparticle metamaterials.

Construction of magnetic Fe2O3-Decorated electroactive Poly(amic acid) composites as recyclable Catalysts: Increased loading of gold Nanoparticles, Controlled Size, and Accelerated catalytic reduction of 4-Nitrophenol

Nanocomposites are widely used in heterogeneous catalysts in the field of water treatment, which exhibit controllable structural advantages and synergistic effects between their components further enhancing catalytic activity. In the current research, we developed the Au nanoparticles immobilized magnetic γ-Fe2O3/Electroactive Poly (amic acid) composite (6Au/EPAA-Fe2O3) prepared by using the in-situ redox reaction strategy. Sundry techniques such as FT-IR, XRD, TGA, SEM/HR-TEM, CV, and XPS analysis have been applied to explain the chemical structure and morphology of as-synthesized composites. The catalytic performance of the catalyst during the reduction of 4-nitrophenol using NaBH4 as a hydrogen donor was assessed in an aqueous medium at room temperature. Attractively, 6Au/EPAA-Fe2O3 composite exhibits superior catalytic performance, which completes the reduction of 4-NP within the 50 s. The pseudo-first-order kinetic rate constants were estimated as 3.0 × 10-2 s−1 for the reduction of 4-NP. Furthermore, the 6Au/EPAA-Fe2O3 composite has excellent stability and reproducibility of 10 consecutive runs by using an external magnet without loss of catalytic activity.

Construction of electrochemical immunosensor from MXene/multi-walled carbon nanotubes/gold nanoparticles for specific detection of carcinoembryonic antigen.

With the advancement of nanotechnology, various types of nanomaterials have been integrated into electrochemical immunoelectrodes to enhance their performance. Among these, MXene stands out as a promising candidate due to its high electron transfer capacity and abundant surface chemical groups. However, the improvement in electrode performance is often hindered by the self-restacking and agglomeration of MXene. To address this issue, multi-walled carbon nanotubes (MWCNTs) were selected to form composites with MXene. Subsequently, a label-free immunosensor, BSA/Ab/AuNPs/MXene-MWCNTs-Nafion/ITO, was fabricated for specific detection of carcinoembryonic antigen (CEA), a widely used tumor marker. The results demonstrated that the incorporation of MWCNTs can effectively prevent the self-stacking of MXene. Moreover, the composites enhanced the loading of gold nanoparticles (AuNPs) to connect the antibodies, thereby improving electronic transmission signals and sensitivity. The sensor exhibited excellent analytical performance towards CEA with a wide linear range (0.050 to 200ngmL-1) and a low limit of detection of 0.015ngmL-1 (S/N = 3). The possibility of it being applied in clinical trials was verified by using ELISA and differential pulse voltammetry (DPV) assays to detect CEA in serum samples. The recoveries ranged from 95.34 to 102.09% with relative standard deviations (RSDs) below 5.00%. Furthermore, the sensor displayed satisfactory selectivity, repeatability, and stability. We hope the findings highlight promising prospects for advanced immunosensor development and alternative strategies in cancer diagnosis.

Cerium-Organic Framework UiO-66(Ce) as a Support for Nanoparticulate Gold for Use in Oxidation Catalysis.

An optimised synthesis of the metal-organic framework (MOF) UiO-66(Ce) is reported using a modulator-free route, yielding ~5 g of material with high crystallinity and 22% ligand defect. Two methods developed for loading gold nanoparticles onto the MOF. The first uses a double-solvent method to introduce HAuCl4 onto UiO-66(Ce), followed by reduction under 5% H2 in N2, while the second is a novel one-pot method where HAuCl4 is added to the synthesis mixture, forming Au nanoparticles within the pores of the UiO-66(Ce) during crystallisation. Analysis using powder X-ray diffraction (PXRD), nitrogen adsorption isotherms, transmission electron microscopy and small-angle X-ray scattering (SAXS) reveals that the two-step double-solvent method yields gold crystallites on the external surface of the MOF particles that are visible by PXRD. In contrast, the one-pot method forms smaller gold crystallites, with a distribution of sizes centred on ~4 nm diameter as seen by SAXS, with evidence from PXRD for the smallest particles being present within the MOF structure. The Au-loaded UiO-66(Ce) materials are evaluated for the catalytic oxidation of vanillyl alcohol to vanillin at 60 °C. Our findings indicate that incorporating Au nanoparticles via the one-pot synthesis method, enhances redox activity, achieving 43% conversion and 90% selectivity towards vanillin.

An ultrasensitive electrochemical aptasensor based on zeolitic imidazolate framework-67 loading gold nanoparticles and horseradish peroxidase for detection of aflatoxin B1

Aflatoxin B1 (AFB1) is one of the most toxic mycotoxins and poses a high risk to human health. Highly sensitive and rapid detection is one of the most effective preventive measures to avoid potential hazards. Herein, an electrochemical aptasensor based on DNA nanotetrahedron and zeolitic imidazolate framework-67 loading gold nanoparticles, horseradish peroxidase, and aptamers was designed for the ultrasensitive detection of AFB1. The high specific surface area and large pore volume of zeolitic imidazolate framework-67 can increase the loading capacity and further improve the detection sensitivity of electrochemical aptasensors. DNA nanotetrahedron can enhance the capture ability of AFB1 with steady immobilization. The developed aptasensor showed good analytical performance for AFB1 detection, with a detection limit of 3.9 pg mL−1 and a wide linear range of 0.01–100 ng mL−1. The aptasensor detected AFB1 in corn samples with recovery rates ranging from 94.19%–105.77% and has potential for use in food safety monitoring.

Optical Actuation of Nanoparticle-Loaded Liquid-Liquid Interfaces for Active Photonics.

Liquid-liquid interfaces hold the potential to serve as versatile platforms for dynamic processes, due to their inherent fluidity and capacity to accommodate surface-active materials. This study explores laser-driven actuation of liquid-liquid interfaces with and without loading of gold nanoparticles and further exploits the laser-actuated interfaces with nanoparticles for tunable photonics. Upon laser exposure, gold nanoparticles were rearranged along the interface, enabling the reconfigurable, small-aperture modulation of light transmission and the tunable lensing effect. Adapting the principles of optical and optothermal tweezers, we interpreted the underlying mechanisms of actuation and modulation as a synergy of optomechanical and optothermal effects. Our findings provide an analytical framework for understanding microscopic interfacial behaviors, contributing to potential applications in tunable photonics and interfacial material engineering.

Boosting Electrocatalytic N2 Reduction to NH3 by Enhancing N2 Activation via Interaction between Au Nanoparticles and MIL-101(Fe) in Neutral Electrolytes.

Electrocatalytic nitrogen reduction reaction (NRR) has attracted much attention as a sustainable ammonia production technology, but it needs further exploration due to its slow kinetics and the existence of competitive side reactions. In this research, xAu/MIL-101(Fe) catalysts were obtained by loading gold nanoparticles (Au NPs) onto MIL-101(Fe) using a one-step reduction strategy. Herein, MIL-101(Fe), with high specific surface area and strong N2 adsorption capacity, is used as a support to disperse Au NPs to increase the electrochemical active surface area. Au NPs, with a high NRR activity, is introduced as the active site to promote charge transfer and intermediate formation rates. More importantly, the strong interaction between Au NPs and MIL-101(Fe) enhances the electron transfer between Au NPs and MIL-101(Fe), thereby enhancing the activation of N2 and achieving efficient NRR. Among the prepared catalysts, 15 %Au/MIL-101(Fe) has the highest NH3 yield of 46.37 μg h-1 mg-1 cat and a Faraday efficiency of 39.38 % at -0.4 V (vs. RHE). In-situ FTIR reveals that the NRR mechanism of 15 %Au/MIL-101(Fe) follows the binding alternating pathway and also indicates that the interaction between Au NPs and MIL-101(Fe) strengthens the activation of the N≡N bond in the rate-limiting process, thereby accelerating the NRR process.

Ultrasensitive and label-free electrochemical immunosensor for the detection of the ovarian cancer biomarker CA125 based on CuCo-ONSs@AuNPs nanocomposites

Cancer antigen 125 (CA125) is pivotal as a tumor marker in early ovarian cancer prevention and diagnosis. In this work, we introduced an ultrasensitive label-free electrochemical immunosensor tailored for CA125 detection, leveraging nanogold-functionalized copper-cobalt oxide nanosheets (CuCo-ONSs@AuNPs) as nanocomposites. For the inaugural application, copper-cobalt oxide nanosheets delivered the requisite DPV electrochemical response for the immunosensors. Their large specific surface area and commendable electrical conductivity amplify electron transfer and enable significant gold nanoparticle loading. Concurrently, AuNPs offer a plethora of active sites, facilitating easy immobilization of biomolecules via the bond between amino groups and AuNPs. We employed scanning electron microscopy, transmission electron microscopy, and x-ray photoelectron spectroscopy to characterize the nanomaterials' surface morphology and elemental composition. The electrochemical sensor response signals were ascertained using differential pulse voltammetry. Under optimal conditions, the immunosensor exhibited a linear detection range from 1×10−7 U/mL to 1×10−3 U/mL and a detection limit of 3.9×10−8 U/mL (S/N=3). The proposed label-free electrochemical immunosensor furnishes a straightforward, dependable, and sensitive approach for CA125 quantification and stands as a promising method for clinical detection of other tumor markers.

Engineering a hierarchically micro-/nanostructured Si@Au-based artificial enzyme with improved accessibility of active sites for enhanced catalysis.

The active site accessibility and high loading of gold nanoparticles (AuNPs) are key factors affecting the catalytic activity of supported AuNP-based catalysts. However, the preparation of supported AuNP-based catalysts with highly accessible active sites still remains a challenge. Herein, sphere-on-sphere (SoS) silica microspheres with a hierarchical structure, good dispersion and high surface density of thiol groups (10 SH nm-2) are prepared and used as a platform for the growth of high-density AuNPs. The obtained hierarchical Si@Au micro-/nanostructure consisting of 0.55 μm SoS silica microspheres and 7.3 nm AuNPs (SoS-0.55@Au-7.3) is found to show excellent peroxidase-mimicking activity (Km = 0.033 mM and Vmax = 34.6 × 10-8 M s-1) with merits of high stability and good reusability. Furthermore, the as-obtained SoS-0.55@Au-7.3-based system can sensitively detect hydrogen peroxide (H2O2) with a low detection limit of 1.6 μM and a wide linear range from 2.5 μM to 1.0 mM. The high catalytic activity, excellent stability and good reusability of SoS-0.55@Au-7.3 imply its great prospects in biosensing and biomedical analysis.

Engineered platelet cell motors for boosted cancer radiosensitization

Design of engineered cells to target and deliver nanodrugs to the hard-to-reach regions has become an exciting research area. However, the limited penetration and retention of cell-based carriers in tumor tissue restricted their therapeutic efficiency. Inspired by the enhanced delivery behavior of mobile micro/nanomotors, herein, urease-powered platelet cell motors (PLT@Au@Urease) capable of active locomotion, tumor targeting, and radiosensitizers delivery were designed for boosting radiosensitization. The engineered platelet cell motors were constructed by in situ synthesis and loading of radiosensitizers gold nanoparticles in platelets, and then conjugation with urease as the engine. Under physiological concentration of urea, thrust around PLT@Au@Urease motors can be generated via the biocatalytic reactions of urease, leading to rapid tumor cell targeting and enhanced cellular uptake of radiosensitizers. Encouragingly, in comparison with engineered PLT without propulsion capability (PLT@Au), the self-propelled PLT@Au@Urease motors could significantly increase intracellular ROS level and exacerbate nuclear DNA damage induced by γ-radiation, resulting in a remarkably high sensitization enhancement rate (1.89) than that of PLT@Au (1.08). In vivo experiments with 4 T1-bearing mice demonstrated that PLT@Au@Urease in combination with radiation therapy possessed good antitumor performance. Such an intelligent cell motor would provide a promising approach to enhance radiosensitization and broaden the applications of cell motor-based delivery systems.

Plasmonic Photocatalysts Based on Au Nanoparticles and WO3 for Visible Light-Induced Photocatalytic Activity

In this work, we report the application of Au/WO3 composite as a photocatalyst for the degradation of dyes under solar light irradiation. Au/WO3 nanocomposites were synthesized using an acid precipitation method followed by an impregnation/reduction at room temperature. Two composites were obtained by loading gold nanoparticles on two morphologies of nanostructured WO3, nanoplatelets (NP), and pseudospheres (PS). The elaboration parameters of the nanocomposites were optimized according to the gold mass percentage, the HAuCl4 precursor concentration, and the impregnation time. The structural, microstructural, and textural characterization were conducted using advanced techniques: XRD, SEM/TEM microscopies, and XPS and DRS spectroscopies. The optimal synthesis parameters are a 48 h impregnation of a five mass percentage of gold from a HAuCl4 precursor with a concentration of 10−3 mol·L−1. The obtained composites were formed with Au nanoparticles of 7 nm in size. The XRD analyses did not reveal any modification of the oxide supports structure after gold grafting, contrary to the sorption analyses, which evidenced a change in the state of the materials surface. XPS analysis revealed the reduction of W6+ ions into W5+, favoring the presence of oxygen vacancies. Furthermore, a localized surface plasmon resonance effect was observed in the composite at 540 nm. The photocatalysis results of several dye pollutants have shown a selective degradation efficiency depending on the charge of the polluting molecules, pH medium, and mass loading of the catalysts. At the native pH, the photocatalysis process is highly efficient on a cationic molecule, with a low adsorption capacity. Au/WO3 PS composite appears to be the most efficient, degrading almost the whole RhB and MB only in 60 min and 90 min, respectively, while, for the MO anionic dye, the degradation is more efficient in acidic medium (80%) than in basic medium (0%). Trap tests of the main active species were investigated and a photodecomposition mechanism is proposed.

Non-enzymatic glucose detection using free-standing gold nanoparticle loaded carrageenan hydrogel electrodes

The current manuscript reports the development of free-standing nanomaterial-modified hydrogels that can be explored for sensing applications. Most of the nanomaterial-hydrogel systems developed till now rely on the modification of an electrode as the supporting substrate on which the electrochemical reactions can take place. These substrates can be pencil electrodes and or screen-printed electrodes. This widely limits the use of hydrogels which can be used as scaffolds and can be explored for the fabrication of free-standing electrodes. Since the functionality of only hydrogel is quite limited the current manuscript reports the loading of gold nanoparticles inside the hydrogel matrix which makes it functionally active. The successful synthesis of the modified hydrogel was confirmed with Scanning Electron Microscopy (SEM) and elemental analysis. The rheological data confirmed the positive effect of gold loading on the hydrogel storage modulus. As a proof of concept, the work reports the non-enzymatic electrochemical detection of glucose using gold nanoparticle loaded carrageenan hydrogel. The sensor showed a linear response towards varying glucose concentrations (0 to 2.5 mM). The hydrogel systems can be incorporated into wearables and implantable sensors and can be extended for the detection of other biomarkers in bodily fluids.

Preparation of gold nanoparticles loaded MOF-199 for SERS detection of 5-hydroxyindole-3-acetic acid in serum

5-Hydroxyindole-3-acetic acid (5-HIAA) is regarded as a biomarker for diagnosis of carcinoid tumors, and it is of great significance to developing a precision assay for monitoring 5-HIAA levels. In this work, gold nanoparticles loading on the surface of MOF-199 (Au NPs/MOF-199) is prepared to propose a surface enhanced Raman scattering (SERS) assay for 5-HIAA. When 4-mercaptopyridine (4-MPy) is used as a SERS probe, on Au NPs/MOF-199, limit of detection (LOD) at 10−9 mol/L can be achieved. In addition, Au NPs/MOF-199 substrate with good preparation reproducibility shows long-term storage stability at 4 °C. Under optimal condition, the Au NPs/MOF-199-based SERS method is applied to determine 5-HIAA in serum. The concentration linear range is from 10−9 to 10−5 mol/L and LOD is of 6.40 × 10−11 mol/L. Much importantly, Au NPs/MOF-199 substrate exhibits specific response toward 5-HIAA against other metabolites in the serum due to the capturing selectivity from porous MOF-199. The recoveries obtained on spiked human serum samples locate in the span from 94.30% to 106.00% with RSD of 4.01–7.43%. Au NPs/MOF-199-based SERS sensing strategy is a promising avenue for on-field monitoring biomedical species for clinic diagnosis purpose.

Preparation and Photocatalytic CO Oxidation Performance Study of Au/Oxygen-Deficient (Anatase/B-Phase) TiO2 Heterojunction Microspheres

Multi-heterojunctions are more promising than single heterojunctions in photocatalysis due to the availability of more interfaces between each component. However, photocatalytic activity is highly dependent on the contact mode of individual components. In this work, we assembled gold nanoparticles/oxygen-deficient (anatase/B-phase) TiO2 multi-heterojunction microspheres using spray pyrolysis and focused on their contact mode-governed photocatalytic activity. The results reveal that using oxygen-deficient (anatase/B-phase) TiO2 microspheres as building blocks could significantly enhance the absorption of visible light and the photocatalytic activity of a gold–TiO2 system toward the photocatalytic carbon monoxide oxidation. Furthermore, loading gold nanoparticles onto B-phase TiO2 could facilitate a more prominent enhancement of activity than that of pure B-phase TiO2, benefiting from the two-electron reduction of oxygen at the interface of TiO2/Au. Meanwhile, the high crystallinity of B-phase TiO2 microspheres allows for a gold loading amount of 1 wt% in the gold/(anatase/B-phase) TiO2 system, which is 1.67 times more active than pure B-phase TiO2 microspheres, in the photocatalytic oxidation of carbon monoxide to generate carbon dioxide.

Facile In-Situ photocatalytic reduction of AuNPs on multilayer Core-Shell Fe3O4@SiO2@PDA magnetic nanostructures and their SERS application

Surface-enhanced Raman scattering (SERS) is a promising analytical technique for the rapid, sensitive, and repeatable detection in various SERS application fields. Herein, a new type of potential magnetically recyclable SERS substrate was designed and rapidly synthesized via a facile three-step template method. First, the magnetic ferroferric oxide (Fe3O4) cores were prepared by a convenient solvothermal approach, and coated with a thin layer of silica by a sol–gel process in order to improve their stability in complicated environments. Next, the negatively charged polydopamine (PDA)/K6[SiW11VIVO40]·7H2O (PDA/SiW11V) outer shell was assembled upon the magnetic Fe3O4@SiO2 core–shell nanoparticles via a layer-by-layer sequential adsorption process using the stickiness of PDA. The SiW11V multilayer shell can be used as the subsequent photocatalytic reduction precursors for the in-situ loading of high-density gold nanoparticles (AuNPs), without any other organic additives. The AuNPs decorated multilayer core–shell Fe3O4@SiO2@PDA magnetic nanostructures were employed as a potential magnetically recyclable SERS substrate, and showed excellent SERS performance. Using crystal violet (CV) as a model target, the as-fabricated AuNPs modified multilayer core–shell Fe3O4@SiO2@PDA magnetic nanostructures SERS substrates exhibited significant enhancement, and pushed the detection limit down to 10-12 M. Aside from the ultrahigh sensitivity, these SERS substrates also possess an excellent reproducibility (relative standard deviation (RSD) ∼ 8.3%), long-term stability (75 days), and unique chemical stability capability in different organic solvents and different environments with pH ≤ 10. Furthermore, a real-life application is also performed by the detection of melamine in spiked milk solution using the as-prepared magnetic nanostructures SERS-active substrates (limit of detection (LOD), 10-8 M). These results highlight that the rational design and controllable synthesis of multifunctional magnetic SERS substrates is a promising strategy in many different application fields such as biosensing, photoelectrocatalysis, and medical diagnosis.

Gold nanoparticles embedded Fe-BTC (AuNPs@Fe-BTC) metal-organic framework as a fluorescence sensor for the selective detection of As(III) in contaminated waters

In this article, a new off-mode fluorescent platform based on the metal-organic framework (MOF) is introduced as a highly selective and rapid chemical sensor for the detection of As(III) in water and wastewater samples. A typical Fe-BTC (BTC = 1,3,5-benzenetricarboxylate or trimesic acid) MOF was used as a porous template for loading gold nanoparticles (AuNPs@Fe-BTC MOF). The physicochemical properties of AuNPs@Fe-BTC MOF were characterized by Fourier-transform infrared spectroscopy (FT-IR), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EAX), element mapping (MAP) and X-ray diffraction (XRD) analysis. This sensing method for As(III) ions is based on the fact that the fluorescence intensity of AuNPs@Fe-BTC MOF sensor decreases in proportion to the increase in As(III) concentration. The main effective factors on the performance of the sensor signal such as MOF dosage, sonication time, pH and reaction time were optimized. Under optimized conditions, the calibration graph was linear in the concentration range of 0.5–380 ng mL−1 of As(III) and the limit of detection was 0.2 ng mL−1. The proposed method was successfully validated by addition/recovery experiments by the determination of As(III) in four river water and two wastewater effluent samples.

Gold Nanoparticles Coated with SH-PEG-NH2 and Loaded with Ziyuglycoside I for Promoting Autophagy in Hematopoietic Stem Cells.

Radiotherapy and chemotherapy are the fundamental causes of myelosuppression in cancer patients, which usually induce a serious hematopoietic system toxicity, causing the hemocytes and immunity decline of patients. Ziyuglycoside I (ZgI), an active ingredient isolated from traditional Chinese medicine Sanguisorba officinalis L, has been demonstrated to increase the leucocytes and protect hematopoietic stem cells, which is related to its promotion of autophagy in hematopoietic stem cells. In the present study, we formulated the SH-PEG-NH2-coated gold nanoparticles loading ZgI (ZgI-AuNPs) with a enhanced autophagy promotion in hematopoietic stem cells. ZgI-AuNPs were prepared by HAuCl4-sodium citrate reduction method, and the synthesis of ZgI-AuNPs was validated by XRD, FT-IR, DSC, and TEM findings. Furthermore, the drug loading rate and the release of ZgI were evaluated, and the ZgI-AuNPs' effects on autophagy and immunofluorescence staining for LC3B were tested. Finally, the effect of ZgI-AuNPs on the autophagy and hematopoietic ability of HSCs in vivo was also carried out. The prepared ZgI-AuNPs have an irregular cubic crystal structure by TEM observation, and the average particle size was 340 ± 16.5 nm determined by DLS. The XRD, FT-IR and DSC detection showed that the ZgI had been well loaded in AuNPs, and the AuNPs can load the ZgI at a content of 160.63 ± 1.35 μg·mg-1. Meanwhile, the AuNPs can reduce the drug release rate of ZgI. Importantly, the ZgI-AuNPs enhanced autophagy of HSCs both in vitro and in vivo. At the same time, the gold nanoparticles enhance the hematopoietic effect of ZgI on mice HSCs. Our research suggests that SH-PEG-NH2-coated gold nanoparticles loading ZgI has potential application in myelosuppression therapy.

Synthesis of aminated three-layered hollow mesoporous organosilica spheres and in-situ loading gold nanoparticles

• atHMOSs with amino groups were synthesized by a sol-gel method and a subsequent hydrothermal treatment procedure. • The prepared atHMOSs exhibited well-defined three-layered hollow structure and uniform mesopores. • The amino group in atHMOS gives it the ability to load large amounts of gold nanoparticles. Hollow mesoporous spheres with hierarchical structure and functional groups were considerably interest in separation, catalysis, and biomedicine. In this work, aminated three-layered hollow mesoporous organosilica spheres (atHMOSs) are synthesized for the first time by successively co-assembling multiple organosilanes with surfactant and a subsequent hydrothermal treatment procedure. Electron microscopy shows that the prepared atHMOSs have a well-defined three-layered hollow structure with a monodisperse diameter (440 nm) and a uniform mesopores (4.1 nm). Importantly, owing to the doped amino groups successfully, the atHMOSs can effectively coordinate with gold ions, and thus gold nanoparticles loaded in atHMOSs are further prepared after reducing the adsorbed gold ions.

High-performance colorimetric immunoassay for determination of chloramphenicol using metal-organic framework-based hybrid composites with increased peroxidase activity.

Metal-organic frameworks (MOFs) as carriers for high-capacity loading of HRP-IgG and gold nanoparticles are introduced, to prepare MOF hybrids with enhanced peroxidase activity. The prepared MOF hybrids were employed to establish an indirect competitive colorimetric immunoassay for chloramphenicol (CAP) detection, in which the limit of detection for CAP is 0.006μg·L-1, only one-fifth of that of the conventional ELISA using the same antibodies and antigens. The linear range was 0.008-0.108μg·L-1, and the recovery of spiked milk samples varied in the range 76.0-106.0% through three independent experiments. Our proposed colorimetric immunoassay using the MOF hybrid immunoprobe provides a novel platform for ultra-sensitive determination of CAP residues, and it also could be used as a signal amplification model for the high-performance colorimetric immunoassay in food safety monitoring.

Development of upconversion-NMOFs nanocomposite conjugated with gold nanoparticles for NIR light-triggered combinational chemo-photothermal therapy

Having the unique ability to convert near-infrared (NIR) light to high-energy UV–vis radiation, upconversion nanoparticles are currently used in combinational therapy for the development of cancer theranostic approaches. The present work involves the strategy of a designed system based on gold nanoparticles deposited on upconversion nanoparticles via nanoscale metal–organic frameworks (NMOFs) of MIL-53(Fe). Herein, the NMOFs attached upconversion nanoparticles (UCNPs) are not only capable of loading gold nanoparticles but also carrying anticancer drug 5-fluorouracil for imaging and combined photothermal/chemo therapy for boosted antitumor activity. The developed nanocomposite (UCNPs@MIL-53(Fe)@Au) possesses good stability as well as photothermal conversion ability. The nanocomposite can successfully convert NIR laser light (980 nm, 1.4 W/cm2) into heat, and also promote the release of 5-fluorouracil. This recognizes the synergistic chemo-photothermal treatment of cancer cells. Besides enhancing temperature via energy transfer to gold nanoparticles, upconversion nanoparticles are also utilized as a potential imaging agent. The in-vitro experiments show that the nanocomposite possesses good biocompatibility, and enhanced cellular uptake properties after attaching drug molecules. These findings may deliver a simple and effective way to develop a new type of synergistic chemo-photothermal transducers with high efficiency. We are confident that the nanocomposite (UCNPS@MIL-53(Fe)@Au) could open the door to design a significant multifunctional system for diverse applications in cancer treatment.