Abstract: In India railway bridge structures are widely designed with the method suggested by IRS – Concrete bridge code 1997.This Code of Practice applies to the use of plain, reinforced and prestressed concrete in railway bridge construction. It covers both in-situ construction and manufacture of precast units. The Code gives detailed specifications for materials and workmanship for concrete, reinforcement and prestressing tendons used in the construction of railway bridges. After defining the loads, forces and their combinations and requirements for the limit state design, particular recommendations are given for plain concrete, reinforced concrete and prestressed concrete bridge construction. The design of I-Girder bridge superstructure (deck slab and PSC I-beam) are done by calculating bending moments, shear forces, bending resistance in transverse direction, bending resistance in longitudinal direction, checking flexural cracking. The Design of PSC I-Girders is done for Bending moments and Shear forces by Dead Load, Super Imposed Dead Load (SIDL) and Live Loads (LL). The Shrinkage strain, Creep Strain and effect of Temperature rise and fall are also determined. The design is complete for Pre-stressing cables, un-tensioned reinforcements, End cross girder, Shear connectors. I-girder superstructures are the most commonly used superstructures at cross-over location in metro bridges in india, as it has the wide deck slab and it easily permits metro’s to change tracks. I-Girder superstructure construction is component wise construction unlike U-Girders. I-Girders are constructed in casting yard and its deck slab is cast in situ, parapets are also installed on later stage. Keywords: SIDL effects, Live Load effects, Derailment effect, with or without 15% future PT margin
Read full abstract