Liu Isotherm Model Research Articles

Comparison of Spirulina platensis microalgae and commercial activated carbon as adsorbents for the removal of Reactive Red 120 dye from aqueous effluents

Spirulina platensis microalgae (SP) and commercial activated carbon (AC) were compared as adsorbents to remove Reactive Red 120 (RR-120) textile dye from aqueous effluents. The batch adsorption system was evaluated in relation to the initial pH, contact time, initial dye concentration and temperature. An alternative kinetic model (general order kinetic model) was compared with the traditional pseudo-first order and pseudo-second order kinetic models. The equilibrium data were fitted to the Langmuir, Freundlich and Liu isotherm models, and the thermodynamic parameters were also estimated. Finally, the adsorbents were employed to treat a simulated dye-house effluent. The general order kinetic model was more appropriate to explain RR-120 adsorption by SP and AC. The equilibrium data were best fitted to the Liu isotherm model. The maximum adsorption capacities of RR-120 dye were found at pH 2 and 298K, and the values were 482.2 and 267.2mgg−1 for the SP and AC adsorbents, respectively. The thermodynamic study showed that the adsorption was exothermic, spontaneous and favourable. The SP and AC adsorbents presented good performance for the treatment of simulated industrial textile effluents, removing 94.4–99.0% and 93.6–97.7%, respectively, of the dye mixtures containing high saline concentrations.

Application of Mangifera indica (mango) seeds as a biosorbent for removal of Victazol Orange 3R dye from aqueous solution and study of the biosorption mechanism

Mango seed, an abundant residue of the food industry, was used in its natural form (MS) and protonated form (AMS) as a biosorbent for the removal of Victazol Orange 3R (VO-3R) dye from its aqueous solutions. These biosorbents were characterized by infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and by nitrogen adsorption/desorption curves. Optimization of the effects of the initial pH of the dye solution, biosorbent dosage and contact time between the dye and the biosorbents on the biosorption capacities of the biosorbents was studied. Based on an error function (Ferror), the general order kinetic model provided the best fit to the experimental data when compared to the pseudo-first order and pseudo-second order kinetic biosorption models. The equilibrium data were fitted to Langmuir, Freundlich and Liu isotherm models. For both biosorbents, the equilibrium data were best fitted to the Liu isotherm model. Finally, the mechanism of biosorption involving VO-3R and lignin–cellulose was evaluated using the hybrid quantum mechanical/molecular mechanical (QM/MM) approach and molecular dynamic (MD) simulations. The results suggest that water molecules play a key role in the biosorption process.

Ionic silica based hybrid material containing the pyridinium group used as an adsorbent for textile dye

The present study reports the development of an ionic silica based hybrid material containing the cationic pyridinium group, which was employed for the removal of the Reactive Red 194 textile dye from aqueous solution. Three hybrid material samples were prepared with planned textural and chemical properties, varying the inorganic precursor molar percentage in the sol–gel synthesis. The obtained samples were defined as Py/Si-90, Py/Si-92 and Py/Si-94, where the number specifies the inorganic molar percentage. The hybrid samples were characterized by elemental, infrared, 13C and 29Si NMR, N2 adsorption-desorption isotherms and thermogravimetric analyses. The dye-removing ability of these adsorbents was determined by the batch contact adsorption procedure. Effects such as pH value and adsorbent dosage on the adsorption capacities were studied. Four kinetic models were applied. The adsorption was best fitted to Avrami fractional-order kinetic model for the three hybrid material samples. The kinetic data were also adjusted to an intra-particle diffusion model resulting three linear regions, indicating that the adsorption kinetics follows multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich and Liu isotherm models. The maximum adsorption capacities were 165.4, 190.3 and 195.9mgg−1 for Py/Si-90, Py/Si-92 and Py/Si-94, respectively. Simulated dye-house effluents were used to check the applicability of the proposed adsorbents for effluent treatment. Dye loaded adsorbents were regenerated (>98.2%) by using 0.4molL−1 of NaOH solution as an eluent.

Adsorption of Reactive Blue 4 dye from water solutions by carbon nanotubes: experiment and theory

Multi-walled and single-walled carbon nanotubes were used as nanoadsorbents for the successful removal of Reactive Blue 4 textile dye from aqueous solutions. The adsorbents were characterised by infrared and Raman spectroscopy, N(2) adsorption/desorption isotherms and scanning and transmission electron microscopy. The effects of pH, shaking time and temperature on adsorption capacity were studied. In the acidic pH region (pH 2.0), the adsorption of the dye was favourable using both adsorbents. The contact time to obtain equilibrium isotherms at 298-323 K was fixed at 4 hours for both adsorbents. The general order kinetic model provided the best fit to the experimental data compared with pseudo-first order and pseudo-second order kinetic adsorption models. For Reactive Blue 4 dye, the equilibrium data (298 to 323 K) were best fitted to the Liu isotherm model. The maximum sorption capacity for adsorption of the dye occurred at 323 K, attaining values of 502.5 and 567.7 mg g(-1) for MWCNT and SWCNT, respectively. Simulated dyehouse effluents were used to check the applicability of the proposed nanoadsorbents for effluent treatment (removal of 99.89% and 99.98%, for MWCNT and SWCNT, respectively). The interaction of Reactive Blue 4 textile dye with single-walled carbon nanotubes (SWCNTs) was investigated using first principles calculations based on density functional theory. Results from ab initio calculations indicated that Reactive Blue 4 textile dye could be adsorbed on SWCNT through an electrostatic interaction; these results are in agreement with the experimental predictions.

Adsorption of Reactive Red M-2BE dye from water solutions by multi-walled carbon nanotubes and activated carbon

Multi-walled carbon nanotubes and powdered activated carbon were used as adsorbents for the successful removal of Reactive Red M-2BE textile dye from aqueous solutions. The adsorbents were characterised by infrared spectroscopy, N 2 adsorption/desorption isotherms and scanning electron microscopy. The effects of pH, shaking time and temperature on adsorption capacity were studied. In the acidic pH region (pH 2.0), the adsorption of the dye was favourable using both adsorbents. The contact time to obtain equilibrium at 298 K was fixed at 1 h for both adsorbents. The activation energy of the adsorption process was evaluated from 298 to 323 K for both adsorbents. The Avrami fractional-order kinetic model provided the best fit to the experimental data compared with pseudo-first-order or pseudo-second-order kinetic adsorption models. For Reactive Red M-2BE dye, the equilibrium data were best fitted to the Liu isotherm model. Simulated dyehouse effluents were used to check the applicability of the proposed adsorbents for effluent treatment.