Lithological Differences Research Articles

Building a bimodal landscape: bedrock lithology and bed thickness controls on the morphology of Last Chance Canyon, New Mexico, USA

Abstract. We explore how rock properties and channel morphology vary with rock type in Last Chance Canyon, Guadalupe Mountains, New Mexico, USA. The rocks here are composed of horizontally to near-horizontally interbedded carbonate and sandstone. This study focuses on first- and second-order channel sections, where the streams have a lower channel steepness index (ksn) upstream and transition to higher ksn values downstream. We hypothesize that differences in bed thickness and rock strength influence ksn values, both locally by influencing bulk bedrock strength and also nonlocally through the production of coarse sediment. We collected discontinuity intensity data (the length of bedding planes and fractures per unit area), Schmidt hammer rebound measurements, and measured the largest boulder at every 12.2 m elevation contour to test this hypothesis. Bedrock and boulder mineralogy were determined using a lab-based carbonate dissolution method. High-resolution orthomosaics and digital surface models (DSMs) were generated from drone and ground-based photogrammetry. The orthomosaics were used to map channel sections with exposed bedrock. The United States Geological Survey (USGS) 10 m digital elevation models (DEMs) were used to measure channel slope and hillslope relief. We find that discontinuity intensity is negatively correlated with Schmidt hammer rebound values in sandstone bedrock. Channel steepness tends to be higher where reaches are primarily incising through more thickly bedded carbonate bedrock and lower where more thinly bedded sandstone is exposed. Bedrock properties also influence channel morphology indirectly, through coarse sediment input from adjacent hillslopes. Thickly bedded rock layers on hillslopes erode to contribute larger colluvial sediment to adjacent channels, and these reaches have higher ksn values. Larger and more competent carbonate sediment armors both the carbonate and the more erodible sandstone and reduces steepness contrasts across rock types. We interpret that in the relatively steep, high-level ksn downstream channel sections, the slope is primarily controlled by the coarse alluvial cover. We further posit that the upstream low-level ksn reaches have a base level that is fixed by the steep downstream reaches, resulting in a stable configuration, where channel slopes have adjusted to lithologic differences and/or sediment armor.

Guadalupian–Lopingian (Middle–Late Permian) radiolarians from clastic rocks and zircon U–Pb ages of intercalated tuff and tuffaceous sandstone on Sado Island, central Japan

We investigated Permian strata in the Ota area of the Kosado Hills, Sado Island, central Japan, and their depositional ages were determined based on radiolarian biostratigraphy and zircon U–Pb dating. We also focused on the geology of the region and its lithologic correlation with other geological units in the Inner Zone of Southwest Japan. The radiolarian analysis identified the presence of Follicucullus porrectus and F. dilatatus in mudstone exposed on the coastline of Ota, indicating a middle–late Capitanian to early Changhsingian age. Mudstone exposed along the forest road in the Ota area contained Cariver charveti, suggesting a late Capitanian–early Changhsingian age. Zircon U–Pb dating of the tuff layer intercalated within the Follicucullus-bearing mudstone yielded a weighted-mean age of 259.9 ± 2.0 Ma, corresponding to a Capitanian–Wuchiapingian age. The tuffaceous sandstone interbedded with mudstone containing C. charveti yielded a weighted-mean age of 264.1 ± 6.3 Ma, which covers the Roadian to Wuchiapingian ages. The youngest model peak age (256.6 ± 2.6 Ma; Wuchiapingian) provides the most reliable estimate of the maximum depositional age. The Paleozoic strata in the Kosado Hills have previously been correlated with the Ultra-Tamba and Maizuru belts in Southwest Japan based on fossil occurrences. Our findings indicate that the Permian rocks in the Kosado Hills exhibit differences in lithology from those in the Ultra-Tamba belt but share similarities with the upper Guadalupian–Lopingian strata in the Maizuru belt.

ON INFLUENCE OF PHYSICAL AND CHEMICAL MODIFICATION OF WETTABILITY OF FILTRATION SURFACE ON INTERCHANGEABILITY OF IMMISCIBLE FLUIDS IN RESERVOIR FORMATIONS

The article presents and discusses the results of experimental studies of the processes of mutual substitution (displacement) of immiscible fluids, proceeding by the mechanism of impregnation and drainage in layered-heterogeneous reservoirs with hydrodynamically connected and separated interlayers.
 Physical modeling of filtration processes, taking into account the similarity criteria, made it possible to establish that during the mutual substitution of immiscible fluids at the phase boundary and lithological differences, nonequilibrium capillary phenomena develop, which, through the action of capillary forces, significantly affect fluid filtration and saturation distribution in an inhomogeneous porous medium. In order to eliminate the influence of the viscous instability factor on the motion of the displacement front, the processes of displacement of a less viscous fluid by a more viscous one were studied.
 It has been established that non-equilibrium capillary phenomena manifest themselves most intensively in reservoirs with a heterophilic surface, where capillary forces can initiate or block fluid flows between differently permeable interlayers. It has been experimentally shown that in layered-heterogeneous reservoirs with a heterophilic filtration surface in the interlayers, capillary phenomena largely determine the nature of the movement of the fluid displacement front (from the almost complete suppression of the “run-up” of the displacement fronts in the interlayers to the formation of an advanced front in the low-permeability interlayer). In order to exclude the influence of errors of a systematic or random nature on the results of the experiments, their reproducibility and the significance of differences were assessed using the statistical criteria of Student and Cochran, which showed the reliability of the above conclusions.
 The results obtained indicate the dominant effect of crossflows between interlayers on the formation of the displacement front of immiscible fluids in layered-heterogeneous reservoirs, especially with a heterophilic wettability characteristic, as well as the possibility of controlling this process by means of physicochemical modification of the wettability conditions of the filtration surface, for example, using surface active substances (surfactants) of various nature and structure.

ASTER VNIR‐SWIR Based Lithological Mapping of Granitoids in the Western Junggar Orogen (NW Xinjiang): Improved Inputs to Random Forest Method

AbstractAlthough advanced spaceborne thermal emission and reflection radiometer multispectral analysis for lithological mapping has been widely applied, traditional methods such as band ratios (BR) and principal component analysis (PCA) are still hampered by cumbersome data processing and poor classification performance. In this study, we utilize improved data inputs for random forest (RF) to extract lithological information of granitoids, which are the predominant rock type for intrusion‐related polymetallic ore deposits in the western Junggar Orogen (NW Xinjiang). Based on spectral absorption features of minerals (e.g., orthoclase, K‐feldspar, hornblende, biotite, plagioclase, and oligoclase), image statistical information and textural features, we tested different combinations of bands, BR, PCA, and texture using RF method, and found that the combination of B13678 + T1 (Mean texture) achieved the highest weighted‐F1 score for granitoids, with an accuracy of 87.32%. Compared to the support vector machine, RF effectively distinguishes lithological differences between different types of granitoid and wallrocks, especially the granite, granodiorite, and alkali granite in the Akebasito intrusion, as well as the alkali granite, plagiogranite and biotite granite in the Karamay intrusions. Moreover, the large number of rare metal deposits (including Cu, Au, Mo, etc.) distributed near the granitoid intrusions in the western Junggar, our result facilitates the analysis of regional tectonic evolution and mineralization controlling.

New biostratigraphic evidence of Upper Devonian deposits by metamorphosed conodonts from Sidi Bou Othmane area of central Jebilet, Morocco and their paleogeographic implications

This report is dedicated to the Sidi Bou Othmane limestones outcrops, which are exposed in the Central Jebilet. This area experienced strong Hercynian metamorphism and deformation. Strongly metamorphosed and recrystallized conodonts point to Frasnian-Famennian ages, which are reported from this region for the first time. Based on conodont data, we thus revise the age of the Sidi Bou Othmane limestones, which are definitely Late Devonian in age instead of Mississippian (late Viséan) as reported in previous publications. Six stratigraphic intervals from the Middle falsiovalis to marginifera utahensis Zones are identified. The colour alteration index of conodonts (CAI) is very high and varies from CAI 6 to CAI 8, indicating a thermal gradient from 360 °C to over 600 °C for the conodont bearing strata, which is consistent with the isograds obtained in previous publications. Transgressive Upper Devonian limestones discontinuously overlie Ordovician psammites, beginning with a variably thick polymict conglomerate. This unconformity provides evidence of a regional exhumation and erosional event of the Ordovician strata in the Central Jebilet, prior to Upper Devonian transgression. Together with the Koudiat Laabid limestones at Jebel Gueliz in the south, these Upper Devonian outcrops, locally covered by upper Viséan Sarhlef Schists, suggest that the upper Viséan basin of Central Jebilet was divided in a N–S elongated paleogeographical highland formed by the Ordovician and Devonian bedrock. The proposed paleogeographic configuration could explain the lithological differences between the slate deposits to the west and the flysch-like deposits to the east. The exhumation/erosion of Ordovician strata in the Sidi Bou Othmane area may be related to the Eovariscan block faulting and the preorogenic extension of the Meseta domain.

Provenance and transport of supraglacial debris revealed by variations in debris geochemistry on Khumbu Glacier, Nepal Himalaya

AbstractThe origin of supraglacial debris covers is often conceptualised as the formation of a surface lag by melt‐out of englacial debris from slow‐moving ice, where complexity arises from feedback between debris thickness and sub‐debris ice melt. Here, we examine the origin of a debris cover from the perspective of debris provenance and changing tributary supply in a high‐elevation compound valley glacier. Geochemical analysis of 11 major elements in 21 debris samples from six tributaries of Khumbu Glacier (Nepal) shows unambiguous statistical differentiation of debris sources reflecting lithological differences between tributary catchments. Twenty‐four samples from transects across the ablation area are partitioned according to their source areas using the FR2000 sediment unmixing model. We estimate the age of ice at each transect using a higher order ice flow model. The results show greater proportions of debris from lateral tributaries in downglacier locations that have experienced longer flowline histories. More recently, ice from the Main Himalayan Divide (Western Cwm) has become relatively more important. This suggests a change in the state of the lower glacier's structure depending on the relative ice discharges of lateral and divide sources. Ice flux from lower elevation tributaries was more important probably prior to a weakening of the Indian Summer Monsoon at around 1420 CE. The lower elevation tributaries lie within the range of late Holocene equilibrium line altitude variation and therefore respond most sensitively to climatic drivers of the glacier's flow structure. Negative glacier mass balance since around 1900 CE caused tributary glaciers to detach and high‐elevation catchments to re‐establish as the dominant ice source to Khumbu Glacier.

Organic matter enrichment and palaeoenvironmental comparison of Alinian fine-grained sedimentary rocks in lake facies

The Yan'an Formation in the Ordos Basin and the Xintiangou Formation in the Sichuan Basin are typical lake facies sedimentary formations developed in the Alinian period. They contain a large amount of organic-rich fine-grained sedimentary rocks and are the main sites for shale oil and gas enrichment. In this study, geochemical tests, including major, trace, and rare earth elements and TOC tests, were carried out on the fine-grained sedimentary rocks of the shallow lake Yan'an Formation and deep lake Xintiangou Formation to reconstruct their depositional palaeoenvironments, and to explore their organic matter enrichment mechanisms in different depositional environments under lithological differences. The conclusions of this study are as follows: 1) The total organic carbon (TOC) of fine-grained sedimentary rocks increases with increasing mud content and decreasing grain size; 2) The palaeoenvironments of the fine-grained sedimentary rocks in the shallow and deep lake facies are generally consistent, but the redox conditions and deposition rate of the water column in the deep lake facies are stronger than those in the shallow lake facies, while the input of terrigenous detrital, palaeosalinity, and stagnant environment are relatively weaker; 3) The organic matter enrichment mode of lake facies fine-grained sedimentary rocks is a typical palaeoclimatic and palaeoproductivity-dominated “Production mode”; 4) The difference in depositional environments under lithological differences is mainly related to productivity factors, such as palaeoclimate (CIA) and palaeoproductivity (P/Ti). The results of this study help to understand the formation mechanism of lake facies fine-grained sedimentary rocks, distinguish the hydrocarbon generation potential of different lithologies, and provide a basic geological theoretical basis for the exploration of shale oil and gas in the study area.

Influence of dikes in a rock mass on the stability of a mine working under the action of a gravitational-tectonic stress field

The purpose of the research – to analyse the effect of a complex lithological structure on the stability of mine workings. The relevance of the work. The need to take into account complex geological structure is one of the most important factors affecting the stability of rock outcrops. By this we mean the lithological structure and the presence of lithological heterogeneities. The difference in physical and mechanical, and particularly deformation properties, between lithologic alterations and host rocks can lead to unfavorable rock pressure conditions during excavation and operation. The research’s methods. In this work, we study rock mass behavior in the presence of lithologic inhomogeneities with different characteristics using spatial numerical models. Using geological data and rating techniques, the transition from physical and mechanical properties of the sample to the properties of the massif is done. The results of the work and its area of application. The work provides an overview of the occurrence of lithological heterogeneities, and of lithology as a factor influencing the stability of mine workings. Moreover, numerical models with different physical and mechanical properties of dikes were built and analyzed and the actual section of the mine workings underlain by a monkeit dike was taken for the analysis of the influence of lithological differences on the stability of mine workings. Conclusion. The simplification and idealization of massif as a continuous medium leads to loopholes in stress- strain state of massif.

Factors controlling the occurrence, distribution and physical properties of the Ordovician palaeokarstic reservoir in the Ordos Basin Daniudi gas field

The Daniudi gas field in China's Ordos Basin is located in the transitional zone between palaeo‐topographic highs and slopes, whereby dissolution‐collapse breccias are widespread within the palaeokarstic reservoir. Abundant cores, well logs and thin sections were used to study palaeo‐topography, palaeokarstic breccia types, diagenesis and reservoir pore characteristics. The results indicated that reservoir quality is controlled by lithology, palaeo‐topography and diagenesis. The extent of palaeokarstic reservoir dissolution was shown to be determined by lithologic differences, whilst only gypsiferous dolostones and finely crystalline dolostones emerged in reservoir formation. Palaeo‐topography was also found to regulate reservoir development. The reservoirs are primarily located 20 m below the Ordovician unconformity in palaeo‐topographic hills and palaeo‐topographic slopes, whilst their depth is palaeo‐topography dependent. Lithology and palaeo‐topography also coordinate the distribution of palaeokarst breccia facies. Clast‐supported and matrix‐supported chaotic breccias were found in argillaceous dolostone strata. However, crackle–mosaic breccias occurred in gypsiferous dolostones and crystalline dolostones, located in palaeogeomorphic residual hills and slopes. Reservoirs generally develop in crackle–mosaic breccias of Ma51 and Ma52 sub‐Members, the quality of such reservoirs is dependent on the development and distribution of palaeokarst breccia facies and diagenesis. Dissolution of dolomite and anhydrite nodules was found to result in moldic pores and dissolution‐enlarged pores. Overall, the most damaging effect on reservoir quality resulted from calcite cement infilling moldic pores, enlarged pores and fractures.

Spatial interpretation of high‐resolution environmental proxy data of the Middle Pleistocene Palaeolithic faunal kill site Schöningen 13 II‐4, Germany

To spatially characterize the palaeolakeshore environment at the archaeological kill site Schöningen 13 II‐4 of the Middle Pleistocene Reinsdorf sequence, in‐depth palynological, geochemical, aquatic microfossil and archaeological analyses were undertaken on sediment sections with an average thickness of about 15 cm, concordantly overlain by faunal remains, dominated by horse, from the unique ‘Spear Horizon’ layers of the 1995 excavation campaign. The data reveal a distinctive lake level drop, documented by the change from a carbonate‐rich lake marl to a carbonate‐free organic mud with increased carbon content and decreasing C/N, Si/Al, Si/K and Fe/Al ratios, indicating a higher pedogenic supply of organic matter and drier conditions at the site. Compared with older, similar transitional phases of lake level changes occurring within the Reinsdorf sequence, it is important that these youngest sediments are undisturbed, indicating continuous development. Ostracod and diatom analyses indicate a lowering water level with higher salinities and rich aquatic vegetation. Mesorheophilic ostracod species along with tychoplanktic diatom taxa point to flowing waters and turbulence at the lakeshore, presumably related to spring‐fed streams originating from nearby highlands. Palynological results reveal a very diverse zonal vegetation pattern around the palaeolakeshore considering an area of investigation of approximately 50 × 75 m and a tessellated type of regional vegetation during the formation of the archaeological horizons. On topographically lower elevated areas, birch groves and taxa favouring wet, marshy conditions such as Cyperaceae, indicative of terrestrialization, were predominating, while other stands of this transitional phase reveal a very dry, grass‐dominated steppe woodland favouring a rich wildlife with a striking number of megaherbivores. Our results suggest that the lithological differences of the ‘Spear Horizon’ layers containing the archaeological finds were due to their respective topographical situation and that the layers were deposited almost simultaneously during the beginning of the lake level drop. Human activities seem to have concentrated in sparsely vegetated areas along the palaeolakeshore, rather than in areas of adjacent denser birch swamp forest stands.

Exceptional X-Ray contrast: Radiography imaging of a Middle Triassic mixosaurid from Svalbard.

The black shales of the Middle Triassic Botneheia Formation in Svalbard are known for their fossil richness with abundant ichthyosaur remains and beds of the bivalve Daonella. Vertebrate remains from the Muen Mountain on Edgeøya are shown to have exceptional X-ray contrast due to a combination of sulphide and sulphate permineralisation and pseudomorphing. Radiography imaging of a previously described specimen, PMO 219.250, revealed new and spectacular details such as more carpals, teeth, and skull sutures. Teeth and skull characters are taxonomically significant. supporting the referral of PMO 219.250 to Phalarodon and further suggesting an affinity to P. atavus. Three sulphur phases were identified, with the sulphide sphalerite (ZnS) being the highest temperature phase, followed by the sulphate baryte (BaSO4), and the sulphide pyrite (FeS2). Sulphate permineralisation is also seen in specimens from the Upper Jurassic on Svalbard. We suggest that sulphur-rich fluids have flowed and dissolved barium from the shales and deposited the sphalerite and baryte, and that this could be linked to the Cretaceous HALIP. The Jurassic specimens are only permineralised by baryte, while the Triassic specimens have also been permineralised, but mainly pseudomorphed by baryte with crystals of sphalerite. Lithology differences appear to have controlled the compaction of the Triassic specimens, while the Jurassic specimens have retained their three-dimensional shape due to the baryte emplacement relatively earlier in their depositional history. Although soft tissues are not preserved, the excellent X-ray contrast in the Middle Triassic specimens is reminiscent of pyritised fossil sites such as the Hunsrück Slate (Devonian), Beecher's Trilobite Bed (Ordovician), and the La Voulte-sur-Rhône marls (Jurassic).

Climate-controlled submarine landslides on the Antarctic continental margin

Antarctica’s continental margins pose an unknown submarine landslide-generated tsunami risk to Southern Hemisphere populations and infrastructure. Understanding the factors driving slope failure is essential to assessing future geohazards. Here, we present a multidisciplinary study of a major submarine landslide complex along the eastern Ross Sea continental slope (Antarctica) that identifies preconditioning factors and failure mechanisms. Weak layers, identified beneath three submarine landslides, consist of distinct packages of interbedded Miocene- to Pliocene-age diatom oozes and glaciomarine diamicts. The observed lithological differences, which arise from glacial to interglacial variations in biological productivity, ice proximity, and ocean circulation, caused changes in sediment deposition that inherently preconditioned slope failure. These recurrent Antarctic submarine landslides were likely triggered by seismicity associated with glacioisostatic readjustment, leading to failure within the preconditioned weak layers. Ongoing climate warming and ice retreat may increase regional glacioisostatic seismicity, triggering Antarctic submarine landslides.

Sedimentary facies characterization through CPTU profiles: An effective tool for subsurface investigation of modern alluvial and coastal plains

ABSTRACTCone penetration tests, a method that is typically used to determine the engineering properties of soils, can be used as an effective tool for refined subsurface stratigraphic investigations of alluvial and coastal plains, aside from the geographic location. High‐resolution calibration of piezocone penetration tests (CPTU) with 20 sediment cores enabled the detailed characterization of alluvial, deltaic and coastal depositional systems of the Po Plain. Twelve cored facies associations, typical of alluvial and coastal plain environments, were characterized based on four distinct CPTU profiles: basic cone resistance (Qc), sleeve friction (Fs), water pore pressure (U) and friction ratio (FR). Sandy facies associations (fluvial/distributary channel, bay‐head delta, transgressive barrier, delta‐front/beach‐ridge) typically have high (>4 MPa) Qc, low‐to‐negative U and low (<2%) FR. Muddy deposits (well‐drained/poorly‐drained floodplain, swamp, lagoon and prodelta) exhibit opposite trends. Heterolithic facies associations (crevasse‐levée, offshore/delta‐front transition) display characteristic seesaw profiles. Plotting of late Quaternary deposits onto the latest version of the cone penetration test typical soil behaviour chart (Robertson, 2010) enables the identification of distinctive facies associations reflecting distinctive grain size. CPTU interpretation leads to sedimentary facies recognition well beyond the simple lithological differentiation and, in particular, allows the refined characterization of clay‐rich and silt‐rich depositional units (swamp clays and peats, central‐inner and outer lagoon, proximal/distal prodelta deposits) that exhibit only subtle differences in lithology. CPTU data can also serve for the accurate detection of key stratigraphic surfaces with potential engineering applications, such as the Pleistocene–Holocene boundary. This latter, a common feature of several alluvial and coastal plain successions, is commonly marked by an abrupt upward decrease of basic cone resistance and sleeve friction from Late Pleistocene, pedogenized, stiff strata to overlying Holocene, organic‐rich, soft deposits. This study offers an updated CPTU‐facies characterization method that could be suitable for subsurface investigations of modern alluvial and coastal plains worldwide.

Peculiarities of identifying reservoirs with high radioactivity according to well logging data

This article discusses the peculiarities of identifying reservoirs with high radioactivity based on geophysical research materials, the integrated approach used in interpreting research and analyzing geological and geophysical material using the example of Cretaceous and Jurassic deposits of the South Western Kamyshitovoye, Botakhan, Nuraly fields.
 The aim of the work is to study the distribution of highly radioactive productive reservoir rocks, substantiate the causes of their occurrence and the relationship with lithological differences of sedimentary facies.

Preservation of molecular fossils in carbonate concretions in cretaceous shales in the songliao basin, northeast China

Paleoenvironmental information is better preserved in carbonate concretions. In this study, carbonate concretions in the Cretaceous Nenjiang shale, Songliao Basin, were examined to determine whether molecular fossils reflective of the paleoenvironment were better preserved at these sites. Organic and inorganic geochemical characteristics of the concretions and surrounding rocks were analyzed using a series of techniques, including SEM, LA-ICP-MS, GC-MS-MS, and GC-IRMS. The concretions are composed of high content microcrystalline dolomite. The δ13Ccarb and δ18Ocarb values of the concretionary dolomite were significantly higher than those of the surrounding rocks. The dolomite show enrichment in the LREEs and have a negative Eu anomaly. The concretion biomarkers showed distribution characteristics similar to those of surrounding rocks. This suggested that the molecular fossils preserved in concretions were mainly inherited from surrounding rocks. However, the concretions contained more C27 sterane and hopanes, with the hopane/sterane ratio being significantly higher than that of surrounding rocks (1.49 v. 0.86). Moreover, the relative content of 2-methylhopane was 2.4–6.6 times that of the surrounding rocks. This indicated changes in the biological equilibrium of source organisms within and outside the concretions. It was possible that the unstable organic matter at the core increased the bacterial concentration and activity inside the concretions. Both the hydrogen index and biomarker-derived indicators implied that the transformation of organic matter in concretions was minimized when compared with their host rock. The isotope δ13C16-30 was 1‰–3‰ more prevalent in individual N-alkane hydrocarbons in the concretions than in surrounding rocks, likely owing to differences in lithology, bacterial action, and degree of weathering. The study concluded that carbonate concretions could preserve molecular fossils better than the surrounding rocks, and the in-depth organic geochemical analysis of concretions could provide a valuable reference for research into early life forms.

A Cepstral Technique for Unmasking Vital Sub-Seismic Stratigraphic Details Embedded in Dense 3D Seismic Data from Niger Delta

Seismic visibility is enhanced through the change of the seismic data outlook from the standard amplitude measurement to a new domain in order separate fact from artifact in seismic processing and interpretation. General seismic data interpretation involves direct fault and horizon mapping, sequence stratigraphy and seismic modeling to produce structural, stratigraphic and reservoir maps for the delineation, exploration and production of hydrocarbon in oil fields. These methods operate on stacked and migrated data and without adequate calibration. Besides, final stacks are inadequately displayed, processing is coarse and in time domain. Actual hydrocarbon entrapments are rarely detailed well enough to permit reliable location of wells from these studies alone owing to noise. This paper presents the results of the application of Cepstral transform (CT) in the interpretation of the 3D seismic data in the Niger Delta. The aim of the study was to develop a robust technique for mapping subtle stratigraphic units which are usually masked during normal data interpretation using Cepstral algorithm. The Cepstrum is the Fourier transform of the log of the spectrum of the data. The transform filters the field data recorded in time domain, and recovers lost sub-seismic geologic information in quefrency domain. Cepstral domain analysis separates source and transmission path effects. The algorithm is based on fast Fourier transform technique and was developed within Matlab software. The results of the Cepstral decomposition yielded gamnitude, saphe and quefrency maps of the reservoir and revealed sub-seismic faults, differences in lithology and better reservoir delineation and delimitation.

Zircon reveals crystal-melt segregation processes in the genesis of Cretaceous A-type granites and related cumulated rocks in southeastern China

A-type granites are a distinctive group of igneous rocks classified based on chemical and mineralogical criteria. Although numerous theories for the origin of A-type granite have previously been proposed, their genesis remains highly controversial. In the current study, we present bulk-rock geochemistry and zircon UPb isotopes, Hf isotopes, and trace elemental data for a suite of quartz monzonite, porphyritic granite, and miarolitic alkali feldspar granite from the coastal area of Fujian, southeastern China, to evaluate the genetic link between these rocks. Zircon UPb dating indicates that these rocks were crystallized at ∼94–102 Ma. Our data strongly suggests that lithological differences in these rocks are the result of crystal-melt segregation in the shallow crust. The quartz monzonites are enriched in Sr and Ba, with high Zr/Hf and low silica content and a weak negative Eu anomaly, representing the cumulate residue from the crystal-melt segregation of a magma reservoir. A limited fraction of zircon from the quartz monzonite has evolved trace element signatures (high Hf, Nb, Y, U; low Eu/Eu⁎), indicating that the quartz monzonite represents a mixture of accumulated crystals and high silicic melt trapped in cumulate mush. The miarolitic alkali feldspar granites and porphyritic granites are enriched in silica and Rb, and depleted in Sr and Eu. They also display low whole-rock Zr/Hf and Eu/Eu⁎ ratios, and high Rb/Sr ratios, representing highly evolved silicic melts that were segregated from a magma reservoir. The majority of the zircon grains from the miarolitic alkali feldspar granites exhibit the most evolved trace element signatures (high Hf, Nb, Y, U; low Zr/Hf and Eu/Eu⁎) of the entire suite. This reveals that these zircons crystallized from the high silicic melts extracted from a magma reservoir. Magma recharge and the exsolution of volatiles from the interstitial melt have promoted the segregation and upward extraction of high silica magmas from a compacting magma reservoir in the upper crust. Our work demonstrates that the miarolitic alkali feldspar granites with A-type granite features from the coastal area of southeastern China were generated by the crystal-melt segregation process in a shallow crustal magma reservoir.

ЗАСТОСУВАННЯ ГІДРОАКУСТИЧНИХ МЕТОДІВ ПІД ЧАС ГЕОХІМІЧНИХ ДОСЛІДЖЕНЬ РОЗПОДІЛУ ЗАБРУДНЮВАЧІВ У ПОВЕРХНЕВОМУ ШАРІ ДОННИХ ВІДКЛАДІВ

The article presents the results obtained during the long-term field studies of the characteristics of the sedimentary matter metal-containing component distribution within the territories of industrial cities, in particular, Zaporizhia city. Based on field contact and remote studies, one of the aspects of the problem was studied, namely the peculiarities of iron concentrations distribution in the surface layer of bottom sediments of the Dnipro river. Key practical approaches to the application of a new complex method of field observations are outlined, which combine the possibilities of express planar surveying with the determination of geochemical characteristics of river sediments. The methodology of combining contact geochemical studies of iron distribution in surface bottom sediments with the performance of a side view of a remote route survey using sonar is substantiated. Herewith, the possibility of determining the lithological differences of the surface layer of bottom sediments under the conditions of determining the average concentrations of iron for the main material types of sediments is assumed. The results of two-year research based on the data of fieldwork revealed promising perspectives for the development of such a complex of observations in the case of systematization of the direction, additional testing of the technological component in various test areas of the water area, as well as the development of an appropriate methodological foundation.

Effects of Clay Mineral Content and Types on Pore-Throat Structure and Interface Properties of the Conglomerate Reservoir: A Case Study of Baikouquan Formation in the Junggar Basin

Many factors need to be considered in the evaluation of tight conglomerate reservoirs, including the microscopic pore-throat structure, pore connectivity, lithology, porosity, permeability, and clay mineral content. The contents and types of clay minerals reflect the mineral evolution process during the deposition of the reservoir and can reflect the reservoir’s physical properties to a certain extent. In this study, cores from the Baikouquan Formation in Mahu were used to comprehensively analyze the effects of the clay mineral content on the physical properties of a tight conglomerate reservoir, including field emission scanning electron microscopy (FE-SEM), casting thin section observations, X-ray diffraction (XRD), interface property testing, high-pressure mercury injection, low temperature N2 adsorption, and nuclear magnetic resonance (NMR)-movable fluid saturation testing. The results revealed that differences in different lithologies lead to differences in clay mineral content and pore structure, which in turn lead to differences in porosity and permeability. The interface electrification, adsorption, and specific surface area of the reservoir are positively correlated with the clay mineral content, which is mainly affected by the smectite content. As the clay mineral content increases, the proportion of nanoscale pore throats increases, and the core becomes denser. The saturation of the movable fluid controlled by the >50 nm pore throats in the tight conglomerate ranges from 8.7% to 33.72%, with an average of 20.24%. The clay mineral content, especially the I/S (mixed layer of Illite and montmorillonite) content, is negatively correlated with the movable fluid. In general, the research results clarified the relationship between the lithology and physical properties of clay minerals and the microscopic pore structure of the tight conglomerate reservoirs in the Baikouquan Formation in the Mahu area.

Plant Functional Trait Responses to Dolomite and Limestone Karst Forests in Southwest China

Southwest China is distributed with the largest area of limestone and dolomite karst landscapes in the world, and its ecological environment is very fragile; the problem of rock desertification is particularly prominent. Karst lithological differences make habitats and soil heterogeneity more complex, and vegetation has developed certain morphological and physiological structural characteristics to adapt to these special environments, which will most likely lead to differentiation in vegetation functional characteristics, such as seed size, wood density, life type and flowering time, thus affecting the number and growth of seedlings and young trees and the future succession potential of forest stands in karst-vegetation restoration. Therefore, it is important to understand the differences in species composition and the functional characteristics of dolomite and limestone karst forests. Over a 2-year period, we investigated a total of 3170 individuals from 123 species and analyzed the relationship between the species compositions and the functional characteristics of two karst-forest areas with different lithology (i.e., limestone and dolomite karst). It was found that the average number of species with medium-diameter seeds and medium wood density in dolomite plots was obviously greater than the average number of species in limestone plots, but this reached no significant difference. However, with the gradual restoration of each forest, the height and carbon sequestration capacity of the trees began to diverge, with the relative abundance of species with tall trees and high wood density being significantly higher in limestone plots than in dolomite plots. The species richness of evergreen trees was significantly higher in the limestone plots than in the dolomite plots. There was no significant difference in the relative species richness of flowering plants in the two karst-forest areas during spring–summer and winter–spring seasons; however, the species richness of flowering plants in the limestone karst forests was significantly higher than that of flowering plants in the dolomite karst forests during summer and autumn seasons. These significant traits were very closely related to the species richness of the understory plants. Further insight into the temporal aspects of karst-forest succession is needed to grasp how functional traits affect the restorations of different lithological karst forests to their primary states.