Liquid-phase Transmission Electron Microscopy Research Articles

Visualizing formation of high entropy alloy nanoparticles with liquid phase transmission electron microscopy.

High entropy alloy (HEA) nanoparticles hold promise as active and durable (electro)catalysts. Understanding their formation mechanism will enable rational control over composition and atomic arrangement of multimetallic catalytic surface sites to maximize their activity. While prior reports have attributed HEA nanoparticle formation to nucleation and growth, there is a dearth of detailed mechanistic investigations. Here we utilize liquid phase transmission electron microscopy (LPTEM), systematic synthesis, and mass spectrometry (MS) to demonstrate that HEA nanoparticles form by aggregation of metal cluster intermediates. AuAgCuPtPd HEA nanoparticles are synthesized by aqueous co-reduction of metal salts with sodium borohydride in the presence of thiolated polymer ligands. Varying the metal : ligand ratio during synthesis showed that alloyed HEA nanoparticles formed only above a threshold ligand concentration. Interestingly, stable single metal atoms and sub-nanometer clusters are observed by TEM and MS in the final HEA nanoparticle solution, suggesting nucleation and growth is not the dominant mechanism. Increasing supersaturation ratio increased particle size, which together with observations of stable single metal atoms and clusters, supported an aggregative growth mechanism. Direct real-time observation with LPTEM imaging showed aggregation of HEA nanoparticles during synthesis. Quantitative analyses of the nanoparticle growth kinetics and particle size distribution from LPTEM movies were consistent with a theoretical model for aggregative growth. Taken together, these results are consistent with a reaction mechanism involving rapid reduction of metal ions into sub-nanometer clusters followed by cluster aggregation driven by borohydride ion induced thiol ligand desorption. This work demonstrates the importance of cluster species as potential synthetic handles for rational control over HEA nanoparticle atomic structure.

Understanding ZIF particle chemical etching dynamics and morphology manipulation: in situ liquid phase electron microscopy and 3D electron tomography application.

In situ liquid phase transmission electron microscopy (TEM) and three-dimensional electron tomography are powerful tools for investigating the growth mechanism of MOFs and understanding the factors that influence their particle morphology. However, their combined application to the study of MOF etching dynamics is limited due to the challenges of the technique such as sample preparation, limited field of view, low electron density, and data analysis complexity. In this research, we present a study employing in situ liquid phase TEM to investigate the etching mechanism of colloidal zeolitic imidazolate framework (ZIF) nanoparticles. The etching process involves two distinct stages, resulting in the development of porous structures as well as partially and fully hollow morphologies. The etching process is induced by exposure to an acid solution, and both in situ and ex situ experiments demonstrate that the outer layer etches faster leading to overall volume shrinking (stage I) while the inner layer etches faster giving a hollow morphology (stage II), although both the outer layer and inner layer have been etched in the whole process. 3D electron tomography was used to quantify the properties of the hollow structures which show that the ZIF-67 crystal etching rate is larger than that of the ZIF-8 crystal at the same pH value. This study provides valuable insights into MOF particle morphology control and can lead to the development of novel MOF-based materials with tailored properties for various applications.

Early Stage Li Plating by Liquid Phase and Cryogenic Transmission Electron Microscopy

Li metal anodes are among the most promising options for next-generation batteries, exhibiting the highest theoretical capacity. However, irregular Li electrodeposition, which raises safety concerns, is a major obstacle in practical applications. Therefore, a fundamental understanding of the beginning phases of Li plating, such as nucleation and early growth, which have a decisive influence on the dendritic growth of Li, is essential. In this study, we investigated the early stage of Li plating at the single-particle level and its correlation with the solid-electrolyte interphase (SEI) using in situ liquid phase transmission electron microscopy (TEM) and cryogenic TEM. We observed contrasting nucleation dynamics and particle growth patterns in two electrolytes (1 M LiPF6 in ethylene carbonate/diethyl carbonate and 1 M LiTFSI in 1,3-dioxolane/dimethoxy ethane), which originate from different chemical and physical properties of the SEIs. Based on our findings, we propose a mechanism of nucleation and initial growth of Li dictated by the SEI.

Caught in Action: Visualizing Dynamic Nanostructures Within Supramolecular Systems Chemistry.

Supramolecular systems chemistry has been an area of active research to develop nanomaterials with life-like functions. Progress in systems chemistry relies on our ability to probe the nanostructure formation in solution. Often visualizing the dynamics of nanostructures which transform over time is a formidable challenge. This necessitates a paradigm shift from dry sample imaging towards solution-based techniques. We review the application of state-of-the-art techniques for real-time, in situ visualization of dynamic self-assembly processes. We present how solution-based techniques namely optical super-resolution microscopy, solution-state atomic force microscopy, liquid-phase transmission electron microscopy, molecular dynamics simulations and other emerging techniques are revolutionizing our understanding of active and adaptive nanomaterials with life-like functions. This Review provides the visualization toolbox and futuristic vision to tap the potential of dynamic nanomaterials.

Operando Liquid-Phase TEM Experiments for the Investigation of Dissolution Kinetics: Application to Li-Ion Battery Materials

Abstract We present here a novel and universal sample preparation method for liquid-phase transmission electron microscopy (TEM) experiments involving powder materials. Thanks to this new protocol, we demonstrate the ability to study the dissolution of cathode materials by sulfuric acid using operando TEM. Based on ultramicrotomy, this method has been developed to avoid compatibility issues between sample size and liquid cell geometry. The observation parameters have been optimized to get the best contrast in scanning TEM (STEM) images. The reaction kinetics have been investigated by image analysis and compared to those obtained ex situ. By taking into account the sample geometry and the reacting surfaces in both experiments, we show that the reaction kinetics are equivalent and could be overlaid. This proves that the protocol developed enables real operando experiments, as it provides quantitative data at the nanoscale that are representative of the bulk specimen. The main challenges of such a protocol for operando liquid-phase TEM, as well as the accuracy of the image analysis method used, are also discussed.

The effect of flow on radiolysis in liquid phase-TEM flow cells

Applying a continuous flow to rinse radiolytic species from the irradiated volume is a widely proposed strategy to reduce beam-related artefacts in Liquid-Phase Transmission Electron Microscopy (LP-TEM). However, this has not been verified either experimentally or theoretically to date. Here we explore an extended numerical model implementing radiolytic chemistry, diffusion and liquid convection to study the peculiarities of beam-induced chemistry in the presence of a flowing liquid within a heterogenously irradiated nanoconfined channel corresponding to a LP-TEM flow cell. Intruigingly, the concentration of some principal chemical species, predominantly hydrogen radicals and hydrated electrons, is found to grow significantly rather than to decrease in respect to zero-flow when moderate flow conditions are applied. This counterintuitive behaviour is discussed in terms of reactants’ lifetimes, spatial separation of the reaction network and self-scavenging by secondary radiolytic species. In the presence of a flow the consumption of highly reactive species is suppressed due to removal of the self-scavengers, and as a result their concentration in the irradiated area increases. A proof of concept for the supply of scavengers by the flow is demonstrated. Unravelling the effect of flow on radiolysis spawns direct implications for LP-TEM flow experiments providing yet one more control parameter for adjusting the chemistry in the irradiated/imaging area, in particular for mitigation strategies by continuous supply of scavengers.

Chiral assemblies of pinwheel superlattices on substrates.

The unique topology and physics of chiral superlattices make their self-assembly from nanoparticles highly sought after yet challenging in regard to (meta)materials1-3. Here we show that tetrahedral gold nanoparticles can transform from a perovskite-like, low-density phase with corner-to-corner connections into pinwheel assemblies with corner-to-edge connections and denser packing. Whereas corner-sharing assemblies are achiral, pinwheel superlattices become strongly mirror asymmetric on solid substrates as demonstrated by chirality measures. Liquid-phase transmission electron microscopy and computational models show that van der Waals and electrostatic interactions between nanoparticles control thermodynamic equilibrium. Variable corner-to-edge connections among tetrahedra enable fine-tuning of chirality. The domains of the bilayer superlattices show strong chiroptical activity as identified by photon-induced near-field electron microscopy and finite-difference time-domain simulations. The simplicity and versatility of substrate-supported chiral superlattices facilitate the manufacture of metastructured coatings with unusual optical, mechanical and electronic characteristics.

Quantification of reagent mixing in liquid flow cells for Liquid Phase-TEM

Liquid-Phase Transmission Electron Microscopy (LP-TEM) offers the opportunity to study nanoscale dynamics of phenomena related to materials and life science in a native liquid environment and in real time. Until now, the opportunity to control/induce such dynamics by changing the chemical environment in the liquid flow cell (LFC) has rarely been exploited due to an incomplete understanding of hydrodynamic properties of LP-TEM flow systems. This manuscript introduces a method for hydrodynamic characterization of LP-TEM flow systems based on monitoring transmitted intensity while flowing a strongly electron scattering contrast agent solution. Key characteristic temporal indicators of solution replacement for various channel geometries were experimentally measured. A numerical physical model of solute transport based on realistic flow channel geometries was successfully implemented and validated against experiments. The model confirmed the impact of flow channel geometry on the importance of convective and diffusive solute transport, deduced by experiment, and could further extend understanding of hydrodynamics in LP-TEM flow systems. We emphasize that our approach can be applied to hydrodynamic characterization of any customized LP-TEM flow system. We foresee the implemented predictive model driving the future design of application-specific LP-TEM flow systems and, when combined with existing chemical reaction models, to a flourishing of the planning and interpretation of experimental observations.

In-situ imaging of nucleation and growth of superlattices from nanoscale colloidal nanoparticles

Nanoparticle-based superlattices have attracted extensive research efforts due to their versatile composition and packing-dependent optical, magnetic, electronic, catalytic, mechanical properties. Yet the experimental understanding of the thermodynamics and pathways of the crystallization processes for these systems, which govern their ultimate morphology, size, and packing structure, has for long remained underexplored. This minireview highlights recent integration of liquid-phase transmission electron microscopy, which allows for real-space, real-time direct imaging of the crystallization processes at the single-particle level, with simulation and the conceptual framework established by pioneers such as Dr. A. A. Chernov. Different aspects of superlattice formation were revealed by direct imaging for the first time, such as the existence of prenucleation precursor in nonclassical crystallization, surface energy-dependent growth, and coalescence, allowing for the charting of phase coordinates and thermodynamic quantities at the nanoscale. We discuss the similarities and differences of crystal growth behaviors in atomic and nanoparticle systems, as well as engineering opportunities to fashion, shape, and achieve quality control in superlattice formation from nanoparticles, for next-generation optical and mechanical metamaterials.

Observation of H2 Evolution and Electrolyte Diffusion on MoS2 Monolayer by In Situ Liquid-Phase Transmission Electron Microscopy.

Unit-cell-thick MoS2 is a promising electrocatalyst for the hydrogen evolution reaction (HER) owing to its tunable catalytic activity, which is determined based on the energetics and molecular interactions of different types of HER active sites. Kinetic responses of MoS2 active sites, including the reaction onset, diffusion of the electrolyte and H2 bubbles, and continuation of these processes, are important factors affecting the catalytic activity of MoS2 . Investigating these factors requires a direct real-time analysis of the HER occurring on spatially independent active sites. Herein, the H2 evolution and electrolyte diffusion on the surface of MoS2 are observed in real time by in situ electrochemical liquid-phase transmission electron microscopy (LPTEM). Time-dependent LPTEM observations reveal that different types of active sites are sequentially activated under the same conditions. Furthermore, the electrolyte flow to these sites is influenced by the reduction potential and site geometry, which affects the bubble detachment and overall HER activity of MoS2 .

The Growth Dynamics of Organic-Inorganic Metal Halide Perovskite Films.

Organic-inorganic metal halide perovskite films have emerged as potential candidate materials for photoelectric devices because of their superior optoelectronic properties. The performance of these devices depends on the quality of perovskite films defined by their grain size, crystallinity, and absence of pinholes. While solution-based processing is the most cost-effective and scalable approach to producing these films, the impact of the process parameters on the film quality and nanoscale details of these processes are unknown. Specifically, it is unclear how perovskites grow from a liquid precursor to form solid-phase nanocrystals and how these nanocrystals arrange to form a uniform film. Here, using liquid-phase transmission electron microscopy (TEM), we show how perovskite nanocrystals nucleate from a precursor solution and then grow and coalesce to form a polycrystalline film. Furthermore, we show how additives, such as urea, can improve the film crystallinity by increasing perovskite solubility, which induces the dissolution and subsequent redeposition of smaller crystals onto larger grains. Our approach to studying the growth of perovskite films provides an important insight into improving the synthesis of perovskites and other technologically relevant crystalline films.

Observation of formation and local structures of metal-organic layers via complementary electron microscopy techniques

Metal-organic layers (MOLs) are highly attractive for application in catalysis, separation, sensing and biomedicine, owing to their tunable framework structure. However, it is challenging to obtain comprehensive information about the formation and local structures of MOLs using standard electron microscopy methods due to serious damage under electron beam irradiation. Here, we investigate the growth processes and local structures of MOLs utilizing a combination of liquid-phase transmission electron microscopy, cryogenic electron microscopy and electron ptychography. Our results show a multistep formation process, where precursor clusters first form in solution, then they are complexed with ligands to form non-crystalline solids, followed by the arrangement of the cluster-ligand complex into crystalline sheets, with additional possible growth by the addition of clusters to surface edges. Moreover, high-resolution imaging allows us to identify missing clusters, dislocations, loop and flat surface terminations and ligand connectors in the MOLs. Our observations provide insights into controllable MOL crystal morphology, defect engineering, and surface modification, thus assisting novel MOL design and synthesis.

Using Single-Crystal Graphene to Form Arrays of Nanocapsules Enabling the Observation of Light Elements in Liquid Cell Transmission Electron Microscopy.

We have designed and fabricated a TEM (transmission electron microscopy) liquid cell with hundreds of graphene nanocapsules arranged in a stack of two Si3N4-x membranes. These graphene nanocapsules are formed on arrays of nanoholes patterned on the Si3N4-x membrane by focused ion beam milling, allowing for better resolution than for the conventional graphene liquid cells, which enables the observation of light elements, such as atomic structures of silicon. We suggest that multiple nanocapsules provide opportunities for consecutive imaging under the same conditions in a single liquid cell. The use of single-crystal graphene windows offers an excellent signal-to-noise ratio and high spatial resolution. The motion of silicon nanoparticles (a low atomic number (Z) material) interacting with nanobubbles was observed, and analyzed, in detail. Our approach will help advance liquid-phase TEM observations by providing a straightforward method to encapsulate liquid between monolayers of various 2-dimensional materials.

Monitoring of CaCO3 Nanoscale Structuration through Real-Time Liquid Phase Transmission Electron Microscopy and Hyperpolarized NMR.

Calcium carbonate (CaCO3) is one of the most significant biominerals in nature. Living organisms are able to control its biomineralization by means of an organic matrix to tailor a myriad of hybrid functional materials. The soluble organic components are often proteins rich in acidic amino-acids such as l-aspartic acid. While several studies have demonstrated the influence of amino acids on the crystallization of calcium carbonate, nanoscopic insight of their impact on CaCO3 mineralization, in particular at the early stages, is still lacking. Herein, we implement liquid phase-transmission electron microscopy (LP-TEM) in order to visualize in real-time and at the nanoscale the prenucleation stages of CaCO3 formation. We observe that l-aspartic acid favors the formation of individual and aggregated prenucleation clusters which are found stable for several minutes before the transformation into amorphous nanoparticles. Combination with hyperpolarized solid state nuclear magnetic resonance (DNP NMR) and density functional theory (DFT) calculations allow shedding light on the underlying mechanism at the prenucleation stage. The promoting nature of l-aspartic acid with respect to prenucleation clusters is explained by specific interactions with both Ca2+ and carbonates and the stabilization of the Ca2+-CO32-/HCO3- ion pairs favoring the formation and stabilization of the CaCO3 transient precursors. The study of prenucleation stages of mineral formation by the combination of in situ LP-TEM, advanced analytical techniques (including hyperpolarized solid-state NMR), and numerical modeling allows the real-time monitoring of prenucleation species formation and evolution and the comprehension of their relative stability.

Nanoscale visualization of metallic electrodeposition in a well-controlled chemical environment

Liquid phase transmission electron microscopy (TEM) provides a useful means to study a wide range of dynamics in solution with near-atomic spatial resolution and sub-microsecond temporal resolution. However, it is still a challenge to control the chemical environment (such as the flow of liquid, flow rate, and the liquid composition) in a liquid cell, and evaluate its effect on the various dynamic phenomena. In this work, we have systematically demonstrated the flow performance of an in situ liquid TEM system, which is based on ‘on-chip flow’ driven by external pressure pumps. We studied the effects of different chemical environments in the liquid cell as well as the electrochemical potential on the deposition and dissolution behavior of Cu crystals. The results show that uniform Cu deposition can be obtained at a higher liquid flow rate (1.38 μl min−1), while at a lower liquid flow rate (0.1 μl min−1), the growth of Cu dendrites was observed. Dendrite formation could be further promoted by in situ addition of foreign ions, such as phosphates. The generality of this technique was confirmed by studying Zn electrodeposition. Our direct observations not only provide new insights into understanding the nucleation and growth but also give guidelines for the design and synthesis of desired nanostructures for specific applications. Finally, the capability of controlling the chemical environment adds another dimension to the existing liquid phase TEM technique, extending the possibilities to study a wide range of dynamic phenomena in liquid media.

Electrochemical Dissolution and Redeposition of Metallic Nanostructures Revealed by Liquid Phase Transmission Electron Microscopy

Electrochemical Dissolution and Redeposition of Metallic Nanostructures Revealed by Liquid Phase Transmission Electron Microscopy

Liquid Phase Transmission Electron Microscopy Visualization of Surface Pattern Formation during Chemical Reaction Driven Assembly of Nanoparticles

Liquid Phase Transmission Electron Microscopy Visualization of Surface Pattern Formation during Chemical Reaction Driven Assembly of Nanoparticles

Examining Deposition Dynamics of Silver onto Gold Nanorods with Liquid Phase Transmission Electron Microscopy

Examining Deposition Dynamics of Silver onto Gold Nanorods with Liquid Phase Transmission Electron Microscopy

Conformation Dynamics of Single Polymer Strands in Solution.

Conformational changes in macromolecules significantly affect their functions and assembly into high-level structures. Despite advances in theoretical and experimental studies, investigations into the intrinsic conformational variations and dynamic motions of single macromolecules remain challenging. Here, liquid-phase transmission electron microscopy enables the real-time tracking of single-chain polymers. Imaging linear polymers, synthetically dendronized with conjugated aromatic groups, in organic solvent confined within graphene liquid cells, directly exhibits chain-resolved conformational dynamics of individual semiflexible polymers. These experimental and theoretical analyses reveal that the dynamic conformational transitions of the single-chain polymer originate from the degree of intrachain interactions. In situ observations also show that such dynamics of the single-chain polymer are significantly affected by environmental factors, including surfaces and interfaces.

Radiolysis-Driven Evolution of Gold Nanostructures - Model Verification by Scale Bridging In Situ Liquid-Phase Transmission Electron Microscopy and X-Ray Diffraction.

Utilizing ionizing radiation for in situ studies in liquid media enables unique insights into nanostructure formation dynamics. As radiolysis interferes with observations, kinetic simulations are employed to understand and exploit beam‐liquid interactions. By introducing an intuitive tool to simulate arbitrary kinetic models for radiation chemistry, it is demonstrated that these models provide a holistic understanding of reaction mechanisms. This is shown for irradiated HAuCl4 solutions allowing for quantitative prediction and tailoring of redox processes in liquid‐phase transmission electron microscopy (LP‐TEM). Moreover, it is demonstrated that kinetic modeling of radiation chemistry is applicable to investigations utilizing X‐rays such as X‐ray diffraction (XRD). This emphasizes that beam‐sample interactions must be considered during XRD in liquid media and shows that reaction kinetics do not provide a threshold dose rate for gold nucleation relevant to LP‐TEM and XRD. Furthermore, it is unveiled that oxidative etching of gold nanoparticles depends on both, precursor concentration, and dose rate. This dependency is exploited to probe the electron beam‐induced shift in Gibbs free energy landscape by analyzing critical radii of gold nanoparticles.