Hybrid Liquid Research Articles

Design of a tunable microlens based on hybrid single-wall carbon nanotube and liquid crystal

: Tunable liquid crystal (LC) lenses have garnered significant interest in recent years for their lightweight, cost-effectiveness, and versatility in applications like augmented reality, ophthalmic devices, and astronomy. Despite numerous proposed structures to enhance LC lens performance, achieving a minimal focal length while preserving image quality and balancing cost and complexity remains a daunting challenge. Adaptive microlenses encounter these obstacles due to physical constraints and diffraction effects. One promising solution lies in using adaptive LC-carbon nanotubes (CNTs) lenses. By adjusting external stimuli like electric or magnetic fields, it is possible to modify the refractive index distribution of the LC medium, thus changing the focal length of the microlens. When paired with CNTs, the LC molecules' orientation and control of focal length can be even more precise. Our research findings suggest that to achieve the shortest focal length in a microlens with a thickness of 22.5 μm, it is recommended that the diameter of the CNT should not exceed 10 nm, and the height of CNT should fall within the range of 10 to 20 μm considering the presence of screening effect. Conversely, for a microlens with low full width at half maximum (FWHM), narrower light spot, it is advisable to use CNT with a diameter larger than 100 nm and a height greater than 13 μm. Additionally, for a microlens with an efficient Fresnel number in the range of 1 to 10, the microlens should have CNT with widths from 100 to 200 nm. Therefore, based on the importance of each factor (focal length, FWHM, and Fresnel number), the dimensions of the carbon nanotube can be selected to suit the desired application.

Boolean Circuits in Colloidal Mixtures of ZnO and Proteinoids.

Liquid computers use incompressible fluids for computational processes. Here, we present experimental laboratory prototypes of liquid computers using colloids composed of zinc oxide (ZnO) nanoparticles and microspheres containing thermal proteins (proteinoids). The choice of proteinoids is based on their distinctive neuron-like electrical behavior and their similarity to protocells. In addition, ZnO nanoparticles are chosen for their nontrivial electrical properties. Our research demonstrates the successful extraction of 2-, 4-, and 8-bit logic functions in ZnO proteinoid colloids. Our analysis shows that each material has a distinct set of logic functions and that the complexity of the expressions is directly related to each material present in a mixture. Our study shows that 2-, 4-, and 8-bit logic functions can be successfully extracted from ZnO proteinoid colloids. These findings provide a basis for the development of future hybrid liquid devices capable of general-purpose computing.

Molecular Engineering of Poly(Ionic Liquid) for Direct and Continuous Production of Pure Formic Acid from Flue Gas.

Electrochemical CO2 reduction reaction (CO2RR) offers a promising approach to close the carbon cycle and reduce reliance on fossil fuels. However, traditional decoupled CO2RR processes involve energy-intensive CO2 capture, conversion, and product separation, which increases operational costs. Here, we report the development of a bismuth-poly(ionic liquid) (Bi-PIL) hybrid catalyst that exhibits exceptional electrocatalytic performance for CO2 conversion to formate. The Bi-PIL catalyst achieves over 90% Faradaic efficiency for formate over a wide potential range, even at low 15% v/v CO2 concentrations typical of industrial flue gas. The biphenyl in PIL backbone affords hydrophobicity while maintaining high ionic conductivity, effectively mitigating the flooding issues. The PIL layer plays a crucial role as a CO2 concentrator and co-catalyst that accelerates the CO2RR kinetics. Furthermore, we demonstrate the potential of Bi-PIL catalysts in a solid-state electrolyte (SSE) electrolyzer for the continuous and direct production of pure formic acid solutions from flue gas. Techno-economic analysis suggests that this integrated process can produce formic acid at a significantly reduced cost compared to the traditional decoupled approaches. This work presents a promising strategy to overcome the challenges associated with low-concentration CO2 utilization and streamline the production of valuable liquid fuels and chemicals from CO2.

Epoxy/cashew nut shell liquid hybrid polymer composite reinforced with sisal fiber mat and stainless steel wire mesh: mechanical and thermal behavior study

Epoxy/cashew nut shell liquid hybrid polymer composite reinforced with sisal fiber mat and stainless steel wire mesh: mechanical and thermal behavior study

Correction: Jung et al. Heat Integration of Liquid Hydrogen-Fueled Hybrid Electric Ship Propulsion System. J. Mar. Sci. Eng. 2023, 11, 2157

Error in Figure [...]

Investigating the safety of solid/liquid hybrid electrolyte lithium-ion battery: A comparative study with traditional LIBs under abuse condition

Lithium-ion battery (LIB) with solid‒liquid hybrid electrolyte is an important milestone in the development of all-solid-state battery (ASSB) to achieve higher energy density. In-depth understanding of the safety of solid‒liquid hybrid electrolyte battery (HS-LIB) is investigated for the first time: a detailed analysis and comparison of the possibility and severity of thermal runaway (TR) of HS-LIB and LIB are performed under typical abuse conditions to further explain the practical safety of HS-LIB in multiple dimensions. Poor thermal safety is identified by the lower self-heating onset temperature Tonset (78 °C) and thermal runaway triggering temperature Ttr (138 °C) of HS-LIB with 100 % state of charge (SOC), as well as higher maximum temperature Tmax (>1200 °C) and 2–3 times maximum temperature rise rate dT/dtmax (349.3 °C/s) higher than LIBs. The significant volume changes of SiOx as an anode material contribute to uneven SEI formation, while the resultant cracks and voids accelerate SEI decomposition prematurely. The lower thermodynamic parameter-apparent activation energy Ea also indicates that the test battery has lower thermal stability, and the comparative results of the TNT-equivalent corroborated the greater thermal hazards. External overheating conditions also results in a lower Ttr (168 °C) and shorter time to thermal runaway ttr (177 s) due to faster heat absorption with dT/dtmax (933.8 °C/s). Self-generation of heat by SE in the temperature range that triggers the main response to TR and the high energy release in a short period of time exacerbate the TR hazard. Worse electrical behavior is proven through lower state of charge (114 %) and higher dT/dtmax (>420 °C/s). Encouragingly, HS-LIB exhibits excellent mechanical safety, due to the double roles of solid-state electrolytes: as an electrolyte and a separator, which avoids internal short-circuits caused by melting of the separator at hot spots. Lower thermal stability with greater hazards is explained by a correlation mechanism analysis and these experimental results can provide some reference for the safe design of ASSB.

Fundamental Aspects of Stretchable Mechanochromic Materials: Fabrication and Characterization.

Mechanochromic materials provide optical changes in response to mechanical stress and are of interest in a wide range of potential applications such as strain sensing, structural health monitoring, and encryption. Advanced manufacturing such as 3D printing enables the fabrication of complex patterns and geometries. In this work, classes of stretchable mechanochromic materials that provide visual color changes when tension is applied, namely, dyes, polymer dispersed liquid crystals, liquid crystal elastomers, cellulose nanocrystals, photonic nanostructures, hydrogels, and hybrid systems (combinations of other classes) are reviewed. For each class, synthesis and processing, as well as the mechanism of color change are discussed. To enable materials selection across the classes, the mechanochromic sensitivity of the different classes of materials are compared. Photonic systems demonstrate high mechanochromic sensitivity (Δnm/% strain), large dynamic color range, and rapid reversibility. Further, the mechanochromic behavior can be predicted using a simple mechanical model. Photonic systems with a wide range of mechanical properties (elastic modulus) have been achieved. The addition of dyes to photonic systems has broadened the dynamic range, i.e., the strain over which there is an optical change. For applications in which irreversible color change is desired, dye-based systems or liquid crystal elastomer systems can be formulated. While many promising applications have been demonstrated, manufacturing uniform color on a large scale remains a challenge. Standardized characterization methods are needed to translate materials to practical applications. The sustainability of mechanochromic materials is also an important consideration.

Facile preparation of graphene–graphene oxide liquid cells and their application in liquid-phase STEM imaging of Pt atoms

Graphene–graphene oxide (GO) hybrid liquid cells (LCs) for liquid-phase scanning transmission electron microscopy (STEM) were fabricated using a facile method with commercial graphene on a polymethyl methacrylate sheet and GO on a TEM grid. LCs containing Pt nanoparticles (NPs) and pure water were efficiently produced and observed via STEM. Their composition and thickness were characterized by STEM-electron energy-loss spectroscopy. High-resolution (HR) STEM revealed slow-moving Pt NPs’ atomic structures and fast-moving single Pt atoms at the LC’s thin edges. Minimal damage during HR STEM indicated stable LCs because of their excellent electrical and thermal conductivities and radiolysis species scavenging ability.

Tailoring ZnO nanostructures for transparent photodetector applications in hybrid liquid crystals

We report on enhancing the electro-optical response of nematic liquid crystal (6CHBT) by doping with increasing concentration of ZnO nanoparticles. Photosensitive response of this hybrid system is shown through the generation of a photocurrent at 450 nm. The critical role of surfactants to ensure uniform dispersion of nanoparticles in the liquid crystal matrix and their interplay with the charge carrier collection process are also demonstrated. These properties allow these hybrid liquid crystals to be used in the design of photodetectors integrated into liquid crystal displays without compromising its transparency.

Constructing multi-layer heterogeneous interfaces in liquid metal graphite hybrid powder: Towards microwave absorption enhancement

Carbon based materials are widely used in the preparation of microwave absorption materials due to their low density, high attenuation loss and large specific surface area. However, their high conductivity usually leads to high reflection loss. In this study, multi-layer heterogeneous interfaces were constructed in liquid metal graphite hybrid powder to reduce reflection loss and enhance microwave absorption performance. Gallium oxide (Ga2O3) layer was formed in Ga coated graphite powder to improve impedance matching and attenuation constant via an annealing treatment. Specifically, the hybrid particles with 50 wt% Ga and being annealed at 120 °C for 2 h have a minimum reflection loss (RLmin) value of −42.68 dB and a maximum effective absorption bandwidth (EAB) of 4.11 GHz at a thickness of 3.3 mm. The hybrid particles not only have multi-layer structures with different electrical conductivity, but also form heterojunctions between different interfaces, which can further enhance dipole and interfacial polarization.

Biodiesel production from eggshells derived bio-nano CaO catalyst–Microemulsion fuel blends for up-gradation of biodiesel

The utilization of bio-oil derived from biomass presents a promising alternative to fossil fuels, though it faces challenges when directly applied in diesel engines. Microemulsification has emerged as a viable strategy to enhance bio-oil properties, facilitating its use in hybrid fuels. This study explores the microemulsification of Jatropha bio-oil with ethanol, aided by a surfactant, to formulate a hybrid liquid fuel. Additionally, a bio-nano CaO heterogeneous catalyst synthesized from eggshells is employed to catalyse the production of Jatropha biodiesel from the microemulsified fuel using microwave irradiation. The catalyst is characterized through UV–Vis, XRD, and SEM analysis. The investigation reveals a significant reduction in CO, CO2, and NOX emissions with the utilization of microemulsion-based biodiesel blends. Various blends of conventional diesel, Jatropha biodiesel, and ethanol are prepared with different ethanol concentrations (5, 10, and 20 wt%). Engine performance parameters, including fuel consumption, NOX emission, and brake specific fuel consumption, are analyzed. Results indicate that the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend exhibits superior performance compared to conventional diesel, Jatropha biodiesel, and other blends.The fuel consumption of the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend is measured at 554.6 g/h, surpassing that of conventional diesel and other biodiesel blends. The presence of water (0.14 %) in the blend reduces the heating value, consequently increasing the energy requirement. CO and CO2 emissions for the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend are notably lower compared to conventional C-18 hydrocarbons and various biodiesel blends. These findings accentuate the efficacy of the microemulsion process in enhancing fuel characteristics and reducing emissions. Further investigations could explore optimizing the emulsifying agents and their impact on engine performance and emission characteristics, contributing to the advancement of sustainable fuel technologies.

Liquid metal hybrid antibacterial hydrogel scaffolds from 3D printing for wound healing

Hydrogels patches hold significant promise for wound healing. Endeavors have been dedicated to the improvement of hydrogel patch functionalities, with the aim of achieving systematic wound management. Herein, we present liquid metal (LM) hybrid antibacterial hydrogel scaffolds for wound healing via the 3D printing strategy. Gelatin/gellan gum-based hydrogel ink is adopted for printing the scaffolds, with LM microdroplets integrated within. Due to the excellent photothermal responsiveness of LM microdroplets, the LM hybrid scaffolds can convert the received near infrared light energy into heat energy, demonstrating controllable antibacterial ability. In addition, vascular endothelial growth factor is introduced into the scaffolds, which can be sustainably released and play an angiogenesis role. In vivo animal experiments demonstrate that this hydrogel scaffolds can effectively assit wound closure by eradicating bacterial infection and promoting angiogenesis. Thus, we believe that the proposed LM hybrid hydrogel scaffolds show promising prospects in wound treatment.

Niobium oxide anode materials with suppressed activity toward hydrogen evolution reaction for aqueous batteries

The hydrogen evolution reaction is the most prominent parasitic reaction for aqueous battery chemistries. Although water-in-salt electrolytes show greatly enhanced electrochemical stability, increasing the voltage of aqueous batteries further by lowering the potential of the negative electrode remains a major challenges due to reductive water splitting. Here, we systematically investigate twelve niobium-based anode materials that show much lower activity towards hydrogen evolution reaction than classic titanium-based anode materials such as lithium titanate (Li4Ti5O12) or titanium dioxide and are therefore a much better choice for aqueous batteries. We confirm Zn2Nb34O87 to be the most suitable anode material for aqueous batteries among these niobates and present full-cell cycling data with LiMn2O4 and LiNi0.8Mn0.1Co0.1O2 cathodes in a water-in-salt/ionic liquid hybrid electrolyte. Furthermore, we compare the catalytic activities of Zn2Nb34O87 and Cu2Nb34O87, with the latter being incompatible with aqueous batteries, and discuss the origin of the large difference in activity toward hydrogen evolution reaction.

Permeable, three-dimensional integrated electronic skins with stretchable hybrid liquid metal solders

Permeable, three-dimensional integrated electronic skins with stretchable hybrid liquid metal solders

Performance Analysis of Liquid-to-Air Heat Exchanger of High-Power Density Racks

Abstract The ability of traditional room-conditioning systems to accommodate expanding information technology loads is limited in contemporary data centers (DCs), where the storage, storing, and processing of data have grown quickly as a result of evolving technological trends and rising demand for online services, which has led to an increase in the amount of waste heat generated by IT equipment. Through the implementation of hybrid air and liquid cooling technologies, targeted, on-demand cooling is made possible by employing a variety of techniques, which include but are not limited to in-row, overhead, and rear door heat exchanger (HX) cooling systems. One of the most common liquid cooling techniques will be examined in this study based on different conditions for high-power density racks (+50 kW). This paper investigates the cooling performance of a liquid-to-air in-row coolant distribution unit (CDU) in test racks containing seven thermal test vehicles (TTVs) under various conditions, focusing on cooling capacity and HX effectiveness under different supply air temperatures (SAT). This test rig has the necessary instruments to monitor and analyze the experiments on both the liquid coolant and the air sides. Moreover, another experiment is conducted to assess the performance of the CDU that runs under different control fan schemes, as well as how the change of the control type will affect the supply fluid temperature and the TTV case temperatures at 10%, 50%, and 100% of the total power. Finally, suggestions for the best control fan scheme to use for these systems and units are provided at the conclusion of the study.

Laser pulse shape transformation in hybrid LC cells containing gold nano-island films

A nano-structured surface containing an Au nano-island film is used to fabricate hybrid liquid crystal (HLC) cells. HLCs are characterized by faster response times. The dynamic holographic technique is applied to make the conversion of the laser pulse shape by using HLCs. From a comparative analysis of experimental results with theoretical modeling of a dynamic process, the time constants of the dynamic grating recording and relaxation have been determined.

Extrusion Printing of Surface-Functionalized Metal-Organic Framework Inks for a High-Performance Wearable Volatile Organic Compound Sensor.

Wearable sensors hold immense potential for real-time andnon-destructive sensing ofvolatile organic compounds (VOCs), requiring both efficient sensing performance and robust mechanical properties. However, conventional colorimetric sensor arrays, acting as artificial olfactory systems for highly selective VOC profiling, often fail to meet these requirements simultaneously. Here, a high-performance wearable sensor array for VOC visual detection is proposed by extrusion printing of hybrid inks containing surface-functionalized sensing materials. Surface-modified hydrophobic polydimethylsiloxane (PDMS) improves the humidity resistance and VOC sensitivity of PDMS-coated dye/metal-organic frameworks (MOFs) composites. It also enhances their dispersion within liquid PDMS matrix, thereby promoting the hybrid liquid as high-quality extrusion-printing inks. The inks enable direct and precise printing on diverse substrates, forming a uniform and high particle-loading (70 wt%) film. The printed film on a flexible PDMS substrate demonstrates satisfactory flexibility and stretchability while retaining excellent sensing performance from dye/MOFs@PDMS particles. Further, the printed sensor array exhibits enhanced sensitivity to sub-ppm VOClevels, remarkable resistance to high relative humidity (RH) of 90%, and the differentiation ability for eight distinct VOCs. Finally, the wearable sensor proves practical by in situ monitoring of wheat scab-related VOC biomarkers. This study presents a versatile strategy for designing effective wearable gas sensors with widespread applications.

A Lightweight and Affordable Wearable Haptic Controller for Robot-Assisted Microsurgery.

In robot-assisted microsurgery (RAMS), surgeons often face the challenge of operating with minimal feedback, particularly lacking in haptic feedback. However, most traditional desktop haptic devices have restricted operational areas and limited dexterity. This report describes a novel, lightweight, and low-budget wearable haptic controller for teleoperated microsurgical robotic systems. We designed a wearable haptic interface entirely made using off-the-shelf material-PolyJet Photopolymer, fabricated using liquid and solid hybrid 3D co-printing technology. This interface was designed to resemble human soft tissues and can be wrapped around the fingertips, offering direct contact feedback to the operator. We also demonstrated that the device can be easily integrated with our motion tracking system for remote microsurgery. Two motion tracking methods, marker-based and marker-less, were compared in trajectory-tracking experiments at different depths to find the most effective motion tracking method for our RAMS system. The results indicate that within the 4 to 8 cm tracking range, the marker-based method achieved exceptional detection rates. Furthermore, the performance of three fusion algorithms was compared to establish the unscented Kalman filter as the most accurate and reliable. The effectiveness of the wearable haptic controller was evaluated through user studies focusing on the usefulness of haptic feedback. The results revealed that haptic feedback significantly enhances depth perception for operators during teleoperated RAMS.

Alginate-derived solid-liquid hybrid structured adsorbent for CO2 capture

The development of highly stable structured solid amine adsorbent is crucial for the large-scale deployment of CO2 capture systems. Here, we report a structured solid amine adsorbent using the solid-liquid hybrid wrapping method, wherein a suspension of tetraethylenepentamine (TEPA) and ZSM-22 support is encapsulated within a calcium alginate film through freeze-drying. The textural properties of the structured adsorbents (SA@S/TX) were investigated using scanning electron microscopy, N2 adsorption-desorption, Fourier transform infrared spectroscopy, and thermal gravimetric analyzer. The CO2 adsorption capacity of SA@S/TX displayed an initial increase followed by a decrease with increasing TEPA loading, and the adsorption rate exhibited a similar trend according to the pseudo-first-order model. The maximum adsorption capacity and adsorption rate (k) were observed to be 2.22 mmol/g and 0.98 min−1 (under conditions of pure CO2, 1 atm and 25 °C), respectively, at a TEPA content of 0.5. In addition, SA@S/TX exhibited good regeneration stability with a low loss in capacity of 10.8 % during 30 cycle of CO2 adsorption–desorption tests, and high thermal stability with a low amine loss of 2.0 % under conditions of 100 °C and 12 h. These results demonstrate that the solid–liquid hybrid wrapping method effectively shapes the powdered adsorbent while significantly reducing TEPA volatilization, offering a possibility for the industrial applications of solid amine adsorbents.

LUBRICATION PROPERTIES OF MXenes AND THEIR COMPOSITES: A REVIEW

Friction and wear phenomena are common problems in sliding equipment, so materials with excellent antifriction and wear resistance properties are getting increasingly more attention. Two-dimensional (2D) materials, such as graphene and molybdenum disulfide, have always been the research hotspots on account of their special structures and excellent tribological properties. In 2011, MXene, an important member of the 2D material family, was launched. With excellent properties such as ultra-high strength, rich surface end groups, and relatively low cost, MXenes have great potential as lubricant additives. Although these properties have proved to be the reason why MXenes are impressive, the preparation of MXenes composites and the understanding of their mechanical and tribological mechanisms remain to be further investigated. In addition, the abundant surface end groups of MXenes nanosheets make them relatively easy to be functionalized, which has attracted widespread attention. This review aims to comprehensively understand the tribological properties of MXenes nanolayers and to summarize and sort out recent research progress. First, the preparation of MXenes is reviewed, and then the latest research progress of MXenes in liquid lubrication, solid lubrication, and solid–liquid hybrid systems since the advent of MXenes is summarized. Finally, some current problems are presented and an outlook on the development of MXenes is given.