Liquid Crystal Polarization Gratings Research Articles

P‐12.10: Fast Switchable Depth‐ranging System Based on Combination of Liquid Crystal Polarization Grating and Ferroelectric Liquid Crystal Dammann Grating

P‐12.10: Fast Switchable Depth‐ranging System Based on Combination of Liquid Crystal Polarization Grating and Ferroelectric Liquid Crystal Dammann Grating

Optically imprinted polarization gratings with a twisted nematic liquid crystal as a photomask

Liquid crystal Pancharatnam–Berry phase optical elements (LCPBOEs) are becoming increasingly attractive elements to be used to enhance near-eye displays or manipulate light beams, owing to their flatness and circular polarization-dependent behavior. The optical imprinting technique that is one of the commonly used methods for fabricating LCPBOEs is considered to be the most promising technique for mass production at a low cost, but the design of the photomask must be improved. In this work, a photomask that is based on a twisted nematic liquid crystal polarization grating (TNLCPG) cell, acting as a broadband linear polarization rotator, is designed. This TNLCPG cell, with a predefined alignment profile of a polarization grating, can convert linearly polarized light into a light field with spatially varying linear polarization and exhibits broadband operation over the entire visible spectrum. The designed TNLCPG photomask is used to demonstrate a liquid crystal polarization grating (LCPG) film using a white flashlight as a writing source. A high diffraction efficiency of greater than 95% is obtained. With its simple design and fabrication, the proposed TNLC-based photomask can potentially be used in the fabrication of LCPBOEs.

High-accuracy circular dichroism measurement using a liquid crystal polarization grating

A significant improvement in the accuracy of a circular dichroism (CD) measurement system using a liquid crystal polarization grating (LCPG) for broadband applications can be achieved. The influences of the diffraction efficiency and residue from the opposite diffraction order for an LCPG are studied theoretically and experimentally. The results show that the measurement accuracy is highly dependent on the residue. The diffraction efficiency only affects the measurement resolution. We also find that when an LCPG is operated at a wavelength far from the design wavelength, the LCPG has a high residue, which will generate a significant measurement error. Five lasers with different wavelengths ranging from visible to infrared are applied to investigate the accuracy of our proposed system for broadband applications. The measurement error can be reduced by one order of magnitude for wavelengths far from the design wavelength of an LCPG by subtracting the residue effect. The final measurement accuracy of our CD apparatus is determined to be a few mdeg as shown in a comparison of the measurement results for a vitamin B12 solution with those obtained using a commercial CD spectropolarimeter.

Flexible and wide-range tuning of liquid crystal polarization grating period based on single and interference-free exposure.

We propose a period control method of liquid crystal polarization grating (LCPG) based on an nterference-free and single exposure process. By adjusting three parameters of exposure setup, including incident angle of exposure beam, wedge angle of birefringent prism and tilt angle of the sample, polarization distribution of the exposure beam is changed. The spatially variant polarization of the exposure beam is transferred to liquid crystal (LC) molecules by an azo-dye photo-sensitive layer. Consequently, the LCPG with the target period is obtained. The proposed method has high flexibility and a wide range of period adjustment covering several microns to more than thousands of microns according to calculated results. Experimental results fit well with calculations. The LCPGs with different values of period from 4.5µm to more than 200µm have been realized experimentally. The proposed interference-free method would accelerate the application of LCPGs with a robust and simple fabrication process.

Robust dynamic phase-shifting common-path shearography using LCPG and pixelated micropolarizer array

A concise and dependable dynamic phase-shifting shearography system based on common-path interferometer is proposed. Two lateral sheared images with common optical path are generated using a liquid crystal polarization grating (LCPG). The sheared images of the object under test interfere with each other, and a pixelated micropolarizer array is used to introduce pixelated carrier, enabling the measurement of dynamic deformation using dynamic phase-shifting. Compared with the ordinary imaging system, the shearography system only needs to insert LCPG between an imaging lens and a camera with pixelated micropolarizer array. The system is resilient to environmental disturbances benefitting from the compact common-path and dynamic phase-shifting method. Theoretical analysis and experiments have been completed, showing that the system can fully exploit the advantages of shearography and improve the reliability of shearography applications.

Diffraction characteristics of a non-mechanical beam steering system with liquid crystal polarization gratings.

The non-mechanical beam steering system is composed of multiple liquid crystal polarization gratings (LCPGs) cascaded by binary or ternary technologies. However, cascading multiple LCPGs cause the beam from one LCPG to obliquely enter the subsequent LCPGs, changing their diffraction efficiency and working voltage at different steering angles. This paper uses the elastic continuum theory of liquid crystals to simulate the tilt angle of liquid crystal molecules under different voltages. The transmission process of the beam in the system at oblique incidence is described with an extended Jones matrix, and the highest diffraction efficiency and working voltage of each LCPG at different steering angles are calculated using vector diffraction theory. It is convenient to calibrate the LCPGs' working voltage and analyze the system's diffraction characteristics. In addition, we used an improved binary cascade technology to design a LCPG non-mechanical beam steering system with a steering angle of ±10° and an angular resolution of 0.67°. Compared with binary cascade, this technology can effectively reduce the number of cascaded devices and increase the system throughput under the same maximum beam steering angle and angular resolution.

A Review of Two-Dimensional Liquid Crystal Polarization Gratings

In the past two decades, polarization gratings (PGs) have attracted intensive attention due to the high-efficient diffraction and polarization selectivity properties. On one hand, the one-dimensional (1D) PGs have been investigated widely and adapted to various applications. On the other hand, optical signal manipulation stimulates the development of multibeam optical devices. Therefore, the development of two-dimensional (2D) PGs is in demand. This review summarizes the research progress of 2D PGs. Different designs and fabrication methods are summarized, including assembling two 1D polarization patterns, a 2D holographic lithography by polarization interference and a micro-pixelated electric field stimulated 2D liquid crystal (LC) structure. Both experiments and analyses are included. The design strategy, diffraction property, merits and demerits are discussed and summarized for the different methods.

P‐3.5: An exposure method of liquid crystal polarization grating for VR/AR optical systems

A period control method of liquid crystal polarization grating is demonstrated, which is based on the polarization modulation of the exposure beam and can be realized by changing the angle parameters in the exposure setup. This method has the advantages in compact structure, high flexibility and good robustness. It provides a new choice for the fabrication of diffractive elements used in VR/AR optical systems.

Recent Advances in Photoalignment Liquid Crystal Polarization Gratings and Their Applications

Liquid crystal (LC) circular polarization gratings (PGs), also known as Pancharatnam–Berry (PB) phase deflectors, are diffractive waveplates with linearly changed optical anisotropy axes. Due to the high diffraction efficiency, polarization selectivity character, and simple fabrication process, photoalignment LC PGs have been widely studied and developed especially in polarization management and beam split. In this review paper, we analyze the physical principles, show the exposure methods and fabrication process, and present relevant promising applications in photonics and imaging optics.

Twisting Structures in Liquid Crystal Polarization Gratings and Lenses

Recently, diverse twisting structures have been discovered to be a potential approach to design liquid crystal polarization gratings and lenses (LCPGs and LCPLs) with a high diffraction efficiency, broad bandwidth, wide view, and large diffraction angle. In this review, we divide these twisting structures into two main types, namely, multi-layer twisting structures with phase compensation and twisting structures forming Bragg diffraction. We found that multi-layer twisting structure LCPGs and LCPLs presented a broader bandwidth and a wider view angle by phase compensation. While for transmissive or reflective Bragg LCPGs, a large diffraction angle with high diffraction efficiency could be achieved. Based on the theoretical analysis in the review, potential research directions on novel twisting structures were prospected.

Deflection Angular Model of Orthogonal Cascade Liquid Crystal Polarization Gratings

Deflection Angular Model of Orthogonal Cascade Liquid Crystal Polarization Gratings

Design of transceiver separation structure for orthogonal cascaded liquid crystal polarization gratings

Design of transceiver separation structure for orthogonal cascaded liquid crystal polarization gratings

Design of Tunable Holographic Liquid Crystalline Diffraction Gratings.

Tunable diffraction gratings and phase filters are important functional devices in optical communication and sensing systems. Polarization gratings, in particular, capable of redirecting an incident light beam completely into the first diffraction orders may be successfully fabricated in liquid crystalline cells assembled from substrates coated with uniform transparent electrodes and orienting layers that force a specific molecular distribution. In this work, the diffraction properties of liquid crystal (LC) cells characterized by a continually rotating cycloidal director pattern at the cell substrates and in the bulk, are studied theoretically by solving a relevant set of the Euler-Lagrange equations. The electric tunability of the gratings is analyzed by estimating the changes in liquid crystalline molecular distribution and thus in effective birefringence, as a function of external voltage. To the best of our knowledge, such detailed numerical calculations have not been presented so far for liquid crystal polarization gratings showing a cycloidal director pattern. Our theoretical predictions may be easily achieved in experimental conditions when exploiting, for example, photo-orienting material, to induce a permanent LC alignment with high spatial resolution. The proposed design may be for example, used as a tunable passband filter with adjustable bandwidths, thus allowing for potential applications in optical spectroscopy, optical communication networks, remote sensing and beyond.

Rigorous coupled-wave analysis of liquid crystal polarization gratings.

Several types of liquid crystal polarization gratings (LCPGs) can be achieved depending on their molecular configurations and diffraction properties. We perform detailed numerical studies of these LCPGs based on the rigorous coupled-wave analysis (RCWA) approach. The unique properties of Raman-Nath and Bragg gratings are investigated, and how the transition between them influences the diffraction behaviors is explained. Two types of LCPGs, corresponding to the planar and the slanted director configurations, are compared in detail. The influence of gradient-pitch on the performance of reflection grating is also explored. Potential applications of these LCPGs for near-eye displays are emphasized.

Tunable Polarization Gratings Based on Nematic Liquid Crystal Mixtures Photoaligned with Azo Polymer-Coated Substrates

Liquid crystal polarization gratings are of great interest for optical communications as elements performing beam steering, splitting, multiplexing or beam combining. Material birefringence, cell thickness or a period of the liquid crystal director pattern influence, among other features, spectroscopic and electro-optical characteristics of fabricated devices, determining thus their functionality and applicability. Here, we report on liquid crystal polarization gratings that allow for complete maximization of the first-order diffraction efficiency (resulting in total elimination of the zeroth-order diffraction) for any wavelength of an incident beam from green to the near-infrared spectral region by applying a low electric voltage. The gratings with periods as small as 10 μm were obtained by holographic exposure of the cell substrates coated with light-sensitive azo polymer alignment layers, and then filled with three different liquid crystal mixtures. The influence of gold nanoparticle dopants in the liquid crystalline mixtures on spectroscopic and electro-optical properties of the devices is presented. Moreover, on the basis of the measured transmittance spectra of the fabricated gratings, the unknown birefringence of liquid crystal mixtures as well as their effective birefringence due to molecular reorientation in the electric field in the visible and near IR region were determined.

Optical edge detection with adjustable resolution based on liquid crystal polarization gratings

Optical edge detection, a part of image processing, plays an important role in extracting image information used in optical analog computation. In this Letter, we raise a new way to realize optical edge detection. This design is based on two liquid crystal polarization gratings with a period of 2.2 mm, which function as a spatial differentiator. We experimentally demonstrate broadband optical detection and real-time adjustable resolution. The proposed method takes advantage of the convenience to use, simple fabrication process, and real-time tunable resolution. It may guide more significant applications in the optical field and other practical scenarios like machine vision in computers.

级联液晶偏振光栅的衍射特性分析

级联液晶偏振光栅的衍射特性分析

Device simulation of liquid crystal polarization gratings.

Liquid crystal polarization gratings manifest several unique features, such as high diffraction efficiency, polarization selectivity, and fast switching time. However, few works address the chiral-doped liquid crystal alignment issue in such gratings. Here, we develop an improved relaxation method to analyze the liquid crystal director distribution in chiral-doped polarization gratings. Our simulation result agrees well with experimental data on a polarization volume grating. The criteria for forming planar or slanted polarization grating are discussed.

Bistable switching of polarization-grating diffractions enabled by a front bistable twisted nematic film.

Bistable electrical switching of high-efficiency grating diffractions is realized by adding a front π-bistable twisted nematic (π-BTN) cell to a passive liquid crystal polarization grating (LCPG). The π-BTN cell can be switched between stable non- and 180°-twisted states, acting as a polarization converter that switches the polarization of a laser beam and thus changes the diffraction behavior of the LCPG. Both states of the π-BTN cell are stable and can be reversibly switched to each other by applying a voltage pulse of different frequencies. We experimentally demonstrate two bistable-switching operations: (i)the BTN-LCPG can either split or deflect the laser beam; and (ii)the BTN-LCPG can selectively diffract the laser beam to the +1st and -1st orders, while maintaining a high diffraction efficiency of ∼90%. With electrical switchability, a simple optical design, and low power consumption, the proposed BTN-LCPG concept is favorable in various applications.

Photoalignment-induced two-dimensional liquid crystal polarization structure via multi-beam polarization interferometry

A two-dimensional (2D) pure polarization pattern via four-beam polarization interferometry of circularly polarized beams is demonstrated both theoretically and experimentally. The polarization orientation of the interference pattern is recorded by an azobenzene photoalignment layer and transferred to liquid crystal (LC), enabling the fabrication of a 2D liquid crystal (LC) chiral structure. This structure behaves as a 2D LC polarization grating (LCPG) that can generate multiple polarization-selective diffraction beams of orthogonal polarization states with high efficiency. This 2D LCPG provides an effective way to distribute an optical signal into multiple receivers by both incidence polarization control and external electric field, therefore offering potential applications on multi-channel optical communication and information processing.