Liquid Chromatographic Method Research Articles

Bioanalytical method development and validation for the quantification of raloxifene hydrochloride from mice plasma by RP-HPLC

Raloxifene hydrochloride (RLX) belongs to the Selective estrogen receptor modulator (SERM) class of drugs, exhibiting diverse affinity to estrogen receptors. The drug is known for its anti-cancer and anti-osteoporosis activity. The current study employs a Reverse Phase High-Performance Liquid Chromatography (RP-HPLC) method that is sensitive and time-efficient for quantitative evaluation of RLX from mice plasma, using tamoxifen citrate as an internal standard (IS). The protein precipitation technique was used to extract the RLX and IS. RLX was separated using a C8 column with an isocratic elution of a mobile phase consisting of acetonitrile and Milli-Q water (pH 3) at a 1 mL/min flow rate. The ultraviolet (UV) detection of the analyte and IS were carried out at 287 nm. The linearity plot was constructed in the range of 100–3200 ng/mL with a correlation coefficient of r2 ≥ 0.9996. The inter-day and intra-day accuracy and precision were found to be within acceptable limits. Stability studies revealed that the analyte remained stable. The validated RP-HPLC method was successfully applied to quantify RLX after oral administration in mice, and the pharmacokinetic (PK) parameters were established. The present RP-HPLC method could be a beneficial tool for the fast and reliable estimation of future PK interactions, PK analysis of formulations, and therapeutic drug monitoring.

Development and validation of stability indicating ultra‐high‐performance liquid chromatographic method for assay and impurities of mexiletine hydrochloride and mexiletine hydrochloride capsules

AbstractMexiletine (MEX) is an antiarrhythmic drug used to treat acute and chronic ventricular arrhythmias. A simple isocratic, rapid, specific, stability‐indicating, and sensitive reverse‐phase ultra‐high‐performance liquid chromatography (UHPLC) method was developed and successfully validated to quantify the assay and impurities of MEX hydrochloride. The new UHPLC method showed the optimum separation of MEX and its seven impurities in 20 min by using sodium acetate buffer (0.14 mM) with 0.3% of glacial acetic acid (pH 4.8) and methanol in the ratio of 40:60 (v/v) as mobile phase. The method used an Acquity HSS T3 (100 × 3.0 mm, 1.8 µm) chromatographic column at a 0.2 mL/min flow rate. The injection volume is 2 µL, and 254 nm is the detection wavelength. Note that, 25°C is the column oven temperature. The method is linear over the concentration range of the quantification limit (0.03%) to 150% (0.3%) of the specification level (0.2%) for the impurities and 50%–150% for the assay method. The quality control lab of bulk drugs and finished dosage form successfully applied the new UHPLC method for quantification of assay and impurities of MEX hydrochloride.

Improving the Current European Pharmacopoeia Enantio-Selective HPLC Method for the Determination of Enantiomeric Purity in Atorvastatin Calcium Salt Drug Substance

Atorvastatin (ATV) is a well-established lipid-lowering agent. ATV has two stereogenic centers, and of the four possible stereoisomers, only the (3R,5R) form is used therapeutically. The European Pharmacopoeia (EP) monograph 2022 for ATV calcium salt describes a normal-phase high-performance liquid chromatography (HPLC) method for the determination of enantiomeric purity in both drug substance and working standard samples, based on a 150 mm × 4.6 mm Chiralpak AD-H column. The main problems with this method are the very long analysis time and the high solvent consumption. Here, an alternative chromatographic protocol was developed using the Chiralpak AD-3 column (250 mm × 4.6 mm) packed with 3 μm silica particles instead of the 5 μm silica particles of the Chiralpak AD-H chiral stationary phase and characterized by the same polysaccharide selector, amylose-tris(3,5-dimethylphenylcarbamate). Using a mobile phase consisting of a mixture of n-hexane-ethanol-formic acid 90:10:0.1 (v/v/v) as the mobile phase and setting the flow rate and column temperature to 1.0 mL min−1 and 35 °C, respectively, a simultaneous stereo-selective separation was achieved within 35 min without observing any overlap between the enantiomeric impurity peak and peaks related to other ATV impurities. Compared to HPLC EP conditions, the analysis time to elute all the potentially related substances was faster and significantly less mobile phase volume was required. The linearity of the method has been demonstrated in the range of 4.4 μg mL−1 to 1000 μg mL−1 (R2 > 0.999). At a concentration of 4.4 μg mL−1, which is 0.075% of the test solution (5.8 mg mL−1, as ATV free acid), the signal-to-noise ratio was found to be 20.

A Review on High Performance Liquid Chromatography (HPLC)

High-performance liquid chromatography (HPLC) is an important qualitative and quantitative technique, generally used for the estimation of pharmaceutical and biological samples. It is the most versatile, safest, dependable, and fastest chromatographic technique for the quality control of drug components. This article was prepared with a review different aspects of HPLC, such as principle types, instrumentation, and application. High- Performance Liquid Chromatography has played a significant role in clinical laboratories for the separation and quantitation of biomarkers in different body fluids. The development of HPLC involves four basic steps; scouting, optimization, robustness testing, and validation. The technique is used to analyze drugs and medicines for their purity and to maintain the highest standards for pharmaceutical products with the end goal of helping patients with medical issues. Method of validation is the process used to confirm that the analytical procedure employed for a specific test is suitable for its intended use. Validation High-Performance Liquid Chromatography method as per ICH guidelines covers all the performance characteristics of validation, like Accuracy, precision, specificity, linearity, range, limit of detection, limit of quantification, robustness, system suitability the testing. The limitation of High-Performance Liquid Chromatography methods of development, public health importance, and validation is the automated process becomes complicated, has low separation power, and is expensive but High-Performance Liquid Chromatography is the modern diagnostic technique is used in all sectors

STABILITY BASED HPLC METHOD FOR CYCLOPHOSPHAMIDE RELATED SUBSTANCES IN FINISHED DRUG PRODUCTS: DEVELOPMENT AND VALIDATION

Objective: The current study aimed to develop a simple, sensitive, and precise high-performance liquid chromatographic (HPLC) method for estimating cyclophosphamide and its related substances, as well as to implement the developed method in a capsule product. Methods: Method development was performed using various solvent and buffer-solvent ratios at different flow rates for better resolution and to decrease the run time. The developed method was validated in accordance with the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines. The developed method was implemented to estimate the amount of cyclophosphamide and its related substances. Results: Chromatographical conditions were optimised, and the best chromatographical conditions with adequate resolution for cyclophosphamide and its related substances were achieved using the enable X-Bridge C18 column, using a mobile phase combination of phosphate buffer pH 7.0, water, methanol, and acetonitrile at a flow rate of 0.5 ml/min. The detection was monitored at a wavelength of 200 nm. The developed method was validated for system suitability, specificity, limit of detection (LOD), limit of quantitation (LOQ), linearity, precision, accuracy and robustness. The results indicate that the method was sensitive and could detect and quantify lower levels of cyclophosphamide and its related substances. The linearity range was from LOQ to 150 %, and a correlation coefficient ranging from 0.9987 to 0.9999 indicates that at this concentration range, substances were highly linear. This was further supported by satisfactory forced degradation studies. Conclusion: The developed analytical method is simple, precise, and reproducible and thus can be used for the stability-indicating analysis of cyclophosphamide and its related substances in pharmaceutical formulations.

A comprehensive study on the identification and characterization of degradation products of lipoglycopeptide Dalbavancin using LC and LC-HRMS/MS.

Dalbavancin is the second-generation approved semisynthetic lipoglycopeptide by the United States Food and Drug Administration (USFDA) for the treatment of acute bacterial skin and skin-structure infections. Unlike other lipoglycopeptides, the stability behavior of Dalbavancin was least explored, which is a prerequisite. The current study endeavors to elucidate the oxidative and hydrolytic stability behavior of Dalbavancin by exposing the drug to oxidative, acidic, and basic stress conditions. A simple liquid chromatography (LC) method was developed, where significant resolution between Dalbavancin, its homologs, and the generated degradation products was achieved. Seven degradation products were identified under acidic, basic, and oxidative stress conditions. Using liquid chromatography and high-resolution mass spectrometry (LC-HRMS), MS/MS studies, the generated degradation products were identified and characterized. Formation of isomeric degradation products was identified especially upon exposure to basic stress conditions. The mechanistic fragmentation pathway for the seven degradation products was established, and the chemical structure for the identified degradation products was elucidated. The results strongly suggest that Dalbavancin is highly susceptible to degradation under oxidative and hydrolytic stress conditions. This study provides insights into the hydrolytic and oxidative stability of Dalbavancin, which can be employed during drug development and discovery in synthesizing relatively stable analogs.

Non-destructive prediction of anthocyanin concentration in whole eggplant peel using hyperspectral imaging

Accurately detecting the anthocyanin content in eggplant peel is essential for effective eggplant breeding. The present study aims to present a method that combines hyperspectral imaging with advanced computational analysis to rapidly, non-destructively, and precisely measure anthocyanin content in eggplant fruit. For this purpose, hyperspectral images of the fruits of 20 varieties with diverse colors were collected, and the content of the anthocyanin were detected using high performance liquid chromatography (HPLC) methods. In order to minimize background noise in the hyperspectral images, five preprocessing algorithms were utilized on average reflectance spectra: standard normalized variate (SNV), autoscales (AUT), normalization (NOR), Savitzky–Golay convolutional smoothing (SG), and mean centering (MC). Additionally, the competitive adaptive reweighted sampling (CARS) method was employed to reduce the dimensionality of the high-dimensional hyperspectral data. In order to predict the cyanidin, petunidin, delphinidin, and total anthocyanin content of eggplant fruit, two models were constructed: partial least squares regression (PLSR) and least squares support vector machine (LS-SVM). The HPLC results showed that eggplant peel primarily contains three types of anthocyanins. Furthermore, there were significant differences in the average reflectance rates between 400–750 nm wavelength ranges for different colors of eggplant peel. The prediction model results indicated that the model based on NOR CARS LS-SVM achieved the best performance, with a squared coefficient of determination (R2) greater than 0.98, RMSEP and RMSEC less than 0.03 for cyanidin, petunidin, delphinidin, and total anthocyanin predication. These results suggest that hyperspectral imaging is a rapid and non-destructive technique for assessing the anthocyanin content of eggplant peel. This approach holds promise for facilitating the more effective eggplant breeding.

A Validated Chiral Chromatography Method for Enantiomeric Separation of Pomalidomide in Human Plasma.

In the present work, new chiral stationary phase high-performance liquid chromatography (CSP-HPLC) method was established and validated for the quantification of pomalidomide (PMD) enantiomers in human plasma. The chromatographic enantiomeric separation was achieved on a Daicel-CSP, Chiralpack IA 4.6 × 250mm, 5μm; because of its advantages of high degree of retention, high resolution capacity, better reproducibility, ability to produce lower back pressure and low degree of tailing. The mobile phase was maintained as methanol: glacial acetic acid (499.50ml:50μL). Ultraviolet wavelength for detection was 220nm. PMD enantiomer-I and enantiomer-II were separated at 8.83 and 15.34min, respectively. Limit of detection and limit of quantification for each enantiomer and the calibration curve of standard PMD was linear in range between 10-5,000ngmL-1. The method was validated according to The International Council for Harmonisation of Technical Requirements of Pharmaceuticals for Human Use (ICH(Q2R1)) specific guidelines. We found no interference peak with PMD chromatogram obtained. This is a simple, reliable and specific method for detection and quantification of enantiomer of PMD in human plasma sample.

Novel Alaninamide Derivatives with Drug-like Potential for Development as Antiseizure and Antinociceptive Therapies─In Vitro and In Vivo Characterization.

In the present study, a series of original alaninamide derivatives have been designed applying a combinatorial chemistry approach, synthesized, and characterized in the in vivo and in vitro assays. The obtained molecules showed potent and broad-spectrum activity in basic seizure models, namely, the maximal electroshock (MES) test, the 6 Hz (32 mA) seizure model, and notably, the 6 Hz (44 mA) model of pharmacoresistant seizures. Most potent compounds 26 and 28 displayed the following pharmacological values: ED50 = 64.3 mg/kg (MES), ED50 = 15.6 mg/kg (6 Hz, 32 mA), ED50 = 29.9 mg/kg (6 Hz, 44 mA), and ED50 = 34.9 mg/kg (MES), ED50 = 12.1 mg/kg (6 Hz, 32 mA), ED50 = 29.5 mg/kg (6 Hz, 44 mA), respectively. Additionally, 26 and 28 were effective in the ivPTZ seizure threshold test and had no influence on the grip strength. Moreover, lead compound 28 was tested in the PTZ-induced kindling model, and then, its influence on glutamate and GABA levels in the hippocampus and cortex was evaluated by the high-performance liquid chromatography (HPLC) method. In addition, 28 revealed potent efficacy in formalin-induced tonic pain, capsaicin-induced pain, and oxaliplatin- and streptozotocin-induced peripheral neuropathy. Pharmacokinetic studies and in vitro ADME-Tox data proved favorable drug-like properties of 28. The patch-clamp recordings in rat cortical neurons showed that 28 at a concentration of 10 μM significantly inhibited fast sodium currents. Therefore, 28 seems to be an interesting candidate for future preclinical development in epilepsy and pain indications.

Sensitive and validated UPLC-MS/MS method for the identification and characterization of forced degradation products for felodipine

AbstractA rapid, stability indicating reverse phase liquid chromatographic method was developed for the determination of purity of Felodipine in active pharmaceutical substance form in the presence of its impurity and its degradation products. To develop the method which is also compatible to liquid chromatographic mass spectroscopic technique. The developed method is also used to determine the assay of Felodipine in bulk drug form. The drug is subjected to various stress conditions like acidic, basic, oxidation, UV light and thermal conditions. Considerable degradation was observed during base hydrolysis. Two degradation products were identified. The Waters Acquity UPLC BEH C18, 2.1 × 100 mm, 1.7 µm Column was used to achieve chromatographic separation. The gradient conditions, diluent and injection volume were optimized to achieve the acceptable resolution between impurities and its degradation products from Felodipine and to get good peak shapes. The masses were determined for main compound and its identified degradation products. Further, the characterization studies for main compound and its degradation products were performed using LCMSMS Q-TOF.

Experimental design approach for the quantitative analysis of multicomponents by single marker and HPLC fingerprinting of Thunbergia laurifolia aqueous extract.

Thunbergia laurifolia is used in traditional Thai medicine to reduce fever and treat mouth ulcers. However, the quantitative analysis of chemical markers has not yet been officially defined. The objective of this study is to develop a high-performance liquid chromatography (HPLC) method using a design of experiment (DoE) for the quantitative analysis of multicomponents by single marker (QAMS) and fingerprinting of the T. laurifolia aqueous extract. Critical variables were screened using a two-level fractional factorial design, followed by the optimization of the selected variables using a central composite design. The validated method was applied for quality assessment based on QAMS and fingerprinting of the extract. Optimum conditions of DoE for the analysis of caffeic acid, vicenin-2, and rosmarinic acid were determined. The relative correction factors for caffeic acid and vicenin-2 were calculated using rosmarinic acid as an internal reference standard, and their contents in 30 samples were determined. The differences between the external standard method (ESM) and QAMS were compared. No significant difference was observed in the quantitative determination, proving the consistency QAMS and ESM. HPLC fingerprints of T. laurifolia were established with 8 of 12 characteristic peaks that were structurally characterized using HPLC-diode array detection-electrospray ionization/tandem mass spectrometry. The similarity of the fingerprints in all samples was ≥0.74, and the pattern recognition of the characteristic peaks was satisfied. The proposed method efficiently detected multiple components of the T. laurifolia extract. Thus, the method is beneficial in providing references for enhancing the quality control of other herbal medicines.

Quality by design‐engineered reversed‐phase high‐performance liquid chromatography method development and validation for simultaneous estimation of neomycin sulfate and beclomethasone dipropionate in bulk and pharmaceutical dosage form

AbstractThe aim of this study was to develop and validate a robust reversed‐phase high‐performance liquid chromatography (RP‐HPLC) method for the simultaneous estimation of neomycin sulfate (NEO) and beclomethasone dipropionate (BECLO) in both bulk drug and pharmaceutical dosage forms. The analysis was conducted using the Box‐Behnken design. The separation of NEO and BECLO was conducted on a Phenomenex Luna C‐18 column (4.6 × 150 mm, 5 µm), employing a mobile phase comprising a mixture of methanol and trifluoroacetic acid in a ratio of 88:12% v/v. The separation was performed at a flow rate of 0.6 mL/min. NEO and BECLO were analyzed at a wavelength of 240 nm employing a photodiode array detector. The validation of the methodology followed the guidelines outlined in the International Council for Harmonization Q2 R (1). The validation process involved assessing critical parameters such as linearity, accuracy, system suitability, precision, and robustness. The results for each parameter were found to be within the acceptable range. The results indicate that the established RP‐HPLC method can effectively be employed for the routine analysis of NEO and BECLO in bulk drug and pharmaceutical dosage forms.

Establishment of chemical fingerprint and determination of main active ingredients in Centellae Herba by HPLC combined with multivariate chemometrics analysis

AbstractIn this paper, a simple and efficient high‐performance liquid chromatography method was established to analyze the chemical composition fingerprint of Centellae Herba (CHA) and determine five triterpenoid active components in CHA, namely, asiaticoside B (AB), madecassoside, asiaticoside, madecasic acid, and asiaticoic acid. The separation of the compounds was carried out on an XD‐C18 column (250 mm × 4.6 mm, 5 µm), the wavelength of the ultraviolet detector was set to 205 nm, and the mobile phase was composed of acetonitrile −0.05% phosphoric acid, 2 mmol/L β‐cyclodextrin aqueous solution, and gradient elution at the flow rate of 1.0 mL/min. A general chromatographic fingerprint consisting of 20 characteristic peaks of 18 batches of CHA samples was established, and the samples were classified and evaluated by similarity analysis, hierarchical cluster analysis, and principal component analysis combined with multivariate econometric analysis. In quantitative analysis, all calibration curves showed good linear regression in the test range (r > 0.999), the average recovery was 96.12%–104.63%, and the relative standard deviations of repeatability and stability were less than 2.00%. The results show that the method is accurate and effective and can be used for the comprehensive quality control of CHA.

Stability-Indicating HPLC Method for Determination of Ibuprofen and Famotidine Degradation Products.

A new stability-indicating high-performance liquid chromatographic method for the quantitative determination of ibuprofen and famotidine degradation products in combined pharmaceutical products was developed and validated. The current aim of this study is to develop a rapid, accurate and robust analytical stability indicating impurity method that can separate ibuprofen, famotidine and their related impurities by using a reversed-phase high-performance liquid chromatography. A Zorbax SB-Phenyl column (4.6 × 150mm2, 5-μm particle size) with mobile phase containing phosphate buffer solution with a pH value of 3.0 and acetonitrile was used. The flow rate was 0.8mL/min and the analytes were detected by UV detector at 265nm. The retention times of ibuprofen and famotidine were 18.43 and 5.14min, respectively. This method was validated to confirm specificity, linearity, sensitivity (limit of detection and limit of quantitation), precision, accuracy, robustness and sample stability according to the International Conference on Harmonization guidelines. Studies have been completed and reported with two active substances in the combined dosage form and seven impurities in total. There is no method in the literature that simultaneously distinguishes and quantitatively analyzes both active substances and degradation products.

Rapid and simultaneous determination of curcuminoids and gingerols in food products containing turmeric and ginger using paper spray mass spectrometry.

Turmeric and ginger are extensively employed as functional ingredients due to their high content of curcuminoids and gingerols, considered the key bioactive compounds found in these roots. In this study, we present an innovative and fast method for the assay of curcuminoids and gingerols in different foods containing the two spices, with the aim of monitoring the quality of products from a nutraceutical perspective. The proposed approach is based on paper spray tandem mass spectrometry coupled with the use of a labeled internal standard, which has permitted to achieve the best results in terms of specificity and accuracy. All the calculated analytical parameters were satisfactory; accuracy values are around 100% for all spiked samples and the precision data result lower than 15%. The protocol was applied to several real samples, and to demonstrate its robustness and reliability, the results were compared to those arising from the common liquid chromatographic method.

Molecularly imprinted polymers using high-performance liquid chromatography to detect and determine ethion pesticide in apricot, grapes, strawberry and soil samples

ABSTRACT This paper demonstrates the synthesis of molecularly imprinted polymers-solid phase extraction-liquid chromatography method at room temperature using bulk polymerisation of ethion pesticide, by high sensitivity, low costs and high stability. By making MIP for ethion as ethion-MIP, which could be detected with a UV-Vis spectrophotometer at 276 nm, a functional monomer of acrylic acid with cross-linking ethylene glycol dimethyl acrylate. The high-performance liquid chromatography methods developed in this study are accurate, sensitive, and precise to apricot, grapes, strawberry and soil samples. The elution process to the template ethion from the ethion-MIP, caused by minimum volume using solution of 1.0 mL of methanol-acetic acid (9:1) was obtained. Different factors affecting the reaction were studied and optimised. The calibration plot is linear in the concentration range of (0.02 to 1.0 µg mL−1). The relative standard deviations of (±2.0%) and detection limit of the method are 0.02 µg mL−1, and the maximum imprinting factor of ethion-MIP was 6.8 mgg−1. The results obtained the evidence of efficiency and reliability of the method for the ethion pesticide analysis and estimation for the capacitance of molecular imprinted polymer, analytical technical method by molecularly imprinted polymer and high-performance liquid chromatography.

Quality assessment of oral antimalarial and antiretroviral medicines used by public health systems in Sahel countries

Malaria and Human Immunodeficiency Virus infections are among the top 10 causes of death in low income countries. Furthermore, many medicines used in these treatment areas are substandard, which contributes to the high death rate. Using a monitoring system to identify substandard and falsified medicines, the study aims to evaluate the quality of antimalarial and antiretroviral medicines in Sahel countries, assessing site conditions, compliance of medicines with pharmacopoeia tests, formulation equivalence with a reference medicine, and the influence of climate on quality attributes. Ultra Performance Liquid Chromatography methods for eight active pharmaceutical ingredients were validated following the International Conference for Harmonization guideline for its detection and quantification. Quality control consists of visual inspections to detect any misinformation or imperfections and pharmacopeial testing to determine the quality of pharmaceutical products. Medicines which complied with uniformity dosage units and dissolution tests were stored under accelerated conditions for 6 months. Artemether/Lumefantrine and Lopinavir/Ritonavir formulations failed uniformity dosage units and disintegration tests respectively, detecting a total of 28.6% substandard medicines. After 6 months stored under accelerated conditions (40 °C // 75% relative humidity) simulating climatic conditions in Sahel countries, some medicines failed pharmacopeia tests. It demonstrated the influence of these two factors in their quality attributes. This study emphasizes the need of certified quality control laboratories as well as the need for regulatory systems to maintain standards in pharmaceutical manufacturing and distribution in these countries, especially when medicines are transported to rural areas where these climatic conditions are harsher.

THE PROBLEM OF REGULATING FUNGICIDES ON THE SKIN SURFACE FOR OCCUPATIONAL SKIN DISEASE IN AGRICULTURAL WORKERS’ RISK PREDICTION

The aim. To establish the norms of fungicides on the skin surface and predicting the risk of occupational skin pathology in agricultural workers to develop measures to prevent diseases caused by dermal exposure to pesticides. Materials and methods. The natural experiment was performed in accordance with modern requirements (European Food Safety Authority (2022), and the risk assessment was carried out according to the Recommendations (Approved by the Ministry of Health of Ukraine No. 324 issued on 13.05.2009) with different methods of spraying techniques: rod, air blast fan spraying, pre-sowing, aviation, knapsack treatment. 17 series of natural experiments were performed, and the air of the working zone area (n =56) and dermal exposure (n =56) were analyzed for each worker with different pesticide application methods. Quantitative determination of pesticide content was carried out by gas-liquid and high-performance liquid chromatography methods. The results were statistically processed using a package of licensed statistical programs MedStat v.5.2 (Copyright © 2003-2019) and Microsoft® Excel® for Microsoft 365 MSO. Results. It was established that there is pesticide contamination, mainly of the gloves of tank filling operators when preparing working solutions. No contamination of the skin surface was detected; only pesticide residues were present on the surface of the workers’ overalls. A comparison of the exposure dose in case of percutaneous exposure during the performance of technological operations with different methods of processing, dermal equivalents of Acceptable Operator Exposure Level of pesticide to workers’ skin (DE AOEL) and the allowable dermal dose for professional contingents (ADderm) and the hazard coefficients by dermal exposure (HCderm) showed that that dermal exposure during individual technological operations with different processing methods had a reliable difference between processing methods, but there is no difference within one application method. Conclusions. During the comparison of the hazard coefficients for dermal exposure, calculated according to different models, no significant difference was found between the risks calculated according to DE AOEL and ADderm for individual technological operations in various treatment methods, except for the operator who performed knapsack treatment and the risk calculated according to ADderm is significantly lower compared to the DE AOEL risk.

RP-HPLC METHOD DEVELOPMENT AND VALIDATION FOR SIMULTANEOUS ESTIMATION OF CURCUMIN AND RESVERATROL IN NANO-MICELLE: DUAL DRUG DUAL FORM SIMULTANEOUS ESTIMATION

Objective: To develop a reverse-phase high-performance liquid chromatography (RP-HPLC) method for simultaneous estimation of conjugated form of Curcumin (CCMN) and free form of Resveratrol (RSV) in nano-micelle. Methods: The conjugation of lipophilic CCMN and hydrophilic Chitosan (CHT) through succinyl linker produce amphipathic molecule that can self-assemble into RSV solution to form micelle. Here RSV exists in micelle core as free form and CCMN with micelle backbone as conjugated form. So it required to estimate conjugated drug and free drug simultaneously from nano-micelle. We developed a RP-HPLC method, utilized C18 column, follow flow rate of mobile phase 1.0 ml/min, which consist of acetonitrile with water (0.5% Ortho Phosphoric acid, pH 4.6) in the ratio of 1:1 for 20 min. Injection volume was 10μl and column temperature 25 ℃. Isosbestic detection of both drugs was at 254 nm. Results: The retention time of RSV and CCMN were at 8.15 min and 11.41 min respectively, completely distinguished sharp peak of CCMN and RSV developed with resolution 7.360±0.117, wide range of linearity with correlation coefficient value (R2) of CCMN and RSV were 0.99987 and 0.99992 respectively and recovery value of CCMN and RSV were 100.041±0.22 % and 100.041±0.21 % respectively. The RSD (relative standard deviation) for accuracy, precision and robustness of the method was found to be less than 2%. Conclusion: The develop method for simultaneous estimation of conjugated CCMN and free form of RSV in the nano-micelle formulation was consider to be accurate, precise, robust and sensitive.

IDENTIFICATION, SEPARATION, AND CHARACTERIZATION OF DEGRADATION PRODUCTS OF TRIAMCINOLONE HEXACETONIDE USING LC AND LC-MS/MS

Objective: The study aimed to separate the forced degradation products of Triamcinolone hexacetonide using HPLC and characterize the degradation product by LC-MS/MS fragmentation pattern. Methods: Triamcinolone hexacetonide (THA) and its primary degradation products were identified using a liquid chromatography-mass spectrometry/Mass spectrometry (LC-MS/MS) approach. The degradation study was based on in-depth stress testing with acid, base, peroxide, heat, and light. A Zorbax SB C18 column and a greener mobile phase composed of methanol and 10 mmol ammonium acetate buffer in water at pH 3 were employed to accomplish separation and quantitation at a flow rate of 0.7 ml/min in an isocratic mode with a 239 nm detection wavelength. Results: A major degradation product of the drug was obtained in acidic and alkaline stress conditions. The drug was found to be stable for all other stress conditions. The LC-MS/MS analysis results of the active pharmaceutical ingredient and resulting product after degradation were interpreted to identify the novel degradation product and fragments. The developed method was validated as per International Council for Harmonization (ICH) guidelines. The square root of the correlation coefficients, which indicated linearity for THA in 50 to 150 % of the workload, was 0.99. Method Precision assay was performed on six different preparations, percentage relative standard deviation (% RSD) of assay value is 0.17 % and system precision is 0.30 %. In accuracy, overall % RSD of 50 %, 100 %, and 150 % in triplicate is 0.95. Conclusion: It is concluded that the drug is stable to all other stress conditions except for acidic and alkaline stress conditions and generates a novel degradation product. The developed LC (Liquid chromatography) method separates and identifies the degradation product.