Linkage Group B1 Research Articles

Identification of Quantitative Trait Loci Conditioning Resistance to Fusarium Root Rot in Common Bean

Fusarium root rot [caused by the soil borne pathogenFusarium solani(Mart.) Appel & Wr. f. sp.phaseoli(Burk.) Snyd. & Hans.] is a major constraint to common bean (Phaseolus vulgarisL.) production worldwide. The objectives of this study were to transfer Fusarium root rot resistance from small‐seeded Middle American black bean into highly susceptible large‐seeded Andean kidney and cranberry bean genotypes and identify quantitative trait loci (QTL) associated with Fusarium root rot resistance in common bean. Two inbred backcross line (IBL) populations, developed from crosses between small‐seeded resistant and large‐seeded genotypes, were evaluated for reaction to root rot during 2 yr in field and greenhouse experiments. Significant genetic variation that displayed continuous transgressive segregation toward root rot susceptibility confirmed the quantitative nature of resistance. Highly significant treatment‐by‐environmental effects were observed. Narrow‐sense heritabilityh2Nestimates for resistance ranged from 0.10 to 0.51 for the kidney and from 0.20 to 0.82 for the cranberry IBL populations. Nine QTL significantly associated with Fusarium root rot resistance in the field and greenhouse, explained from 5 to 53% of the total phenotypic variability. The QTL associated with root rot resistance were located on linkage groups (LGs) B2 and B5 of the integrated bean map close to previously identified QTL for resistance on B2. On the basis of a linear regression model, a combination of five markers associated with QTL on two different LGs accounted for 73% of the phenotypic variation for root rot resistance. Data from the current study provides breeders the opportunity to combine, through marker‐assisted backcrossing, large‐effect QTL identified on different LGs to enhance root rot resistance in Andean germplasm of common bean.

Identification of QTLs associated with resistance to soybean cyst nematode races 2, 3 and 5 in soybean PI 90763

Soybean cyst nematode (SCN) is a major soybean pest throughout the soybean growing regions in the world, including the USA. Soybean PI 90763 is an important SCN resistance source. It is resistant to several SCN populations including races 2, 3 and 5. But its genetics of resistance is not well known. The objectives of this study were to: (1) confirm quantitative trait loci (QTLs) for resistance to SCN race 3 in PI 90763 and (2) identify QTLs for resistance to SCN races 2 and 5. QTLs were searched in Hamilton x PI 90763 F(2:3)populations using 193 polymorphic simple sequence repeats (SSRs) covering 20 linkage groups (LGs). QTLs for resistance to SCN were identified on LGs A2, B1, E, G, J and L. The same QTL was suggested for resistance to different SCN races where their 1-LOD support intervals of QTL positions highly overlapped. The QTL on LG G was associated with resistance to races 2, 3 and 5. The QTL on LG B1 was associated with resistance to races 2 and 5. The QTL on LG J was associated with resistance to races 2 and 3. The QTLs on LGs A2 and L were associated with resistance to race 3. The QTL on LG E was associated with resistance to race 5. We conclude that LGs A2 and B1 may represent an important distinction between resistance to SCN race 3 and resistance to SCN races 2 and 5 in soybean.

Quantitative trait loci associated with oligosaccharide and sucrose contents in soybean (Glycine max L.)

Oligosaccharides and sucrose are very important nutritional components in soybean seeds. However, little information is available about their inheritance. We used molecular markers to identify the genomic regions significantly associated with the quantitative trait locus (QTL) that controls oligosaccharide and sucrose contents in segregating F2:10 Rl lines. Two related, but independent, QTLs were identified for oligosaccharides — near marker satt546 on linkage group (LG) D1b+W and satt278 on LG L. Four others, for sucrose content, were located at LG B1 (satt197), D1b+W (satt546), and L (satt523 and satt278). Finally, we found two common QTLs, on LG D1b+W and L, that are associated with both oligosaccharides and sucrose.

Distinct post-transcriptional modifications result into seven alternative transcripts of the CC–NBS–LRR gene JA1tr of Phaseolus vulgaris

The generation of splice variants has been reported for various plant resistance (R) genes, suggesting that these variants play an important role in disease resistance. Most of the time these R genes belong to the Toll and mammalian IL-1 receptor-nucleotide-binding site-leucine-rich repeat (TIR-NBS-LRR) class of R genes. In Phaseolus vulgaris, a resistance gene cluster (referred to as the B4 R-gene cluster) has been identified at the end of linkage group B4. At this complex resistance cluster, three R specificities (Co-9, Co-y and Co-z) and two R QTLs effective against the fungal pathogen Colletotrichum lindemuthianum, the causal agent of anthracnose, have been identified. At the molecular level, four resistance gene candidates encoding putative full-length, coiled-coil (CC)-NBS-LRR R-like proteins, with LRR numbers ranging from 18 to 20, have been previously characterized. In the present study, seven cDNA corresponding to truncated R-like transcripts, belonging to the CC-NBS-LRR class of plant disease R genes, have been identified. These seven transcripts correspond to a single gene named JA1tr, which encodes, at most, only five LRRs. The seven JA1tr transcript variants result from distinct post-transcriptional modifications of JA1tr, corresponding to alternative splicing events of two introns, exon skipping and multiple 'aberrant splicing' events in the open reading frame (ORF). JA1tr was mapped at the B4 R-gene cluster identified in common bean. These post-transcriptional modifications of the single gene JA1tr could constitute an efficient source of diversity. The present results provide one of the few reports of transcript variants with truncated ORFs resulting from a CC-NBS-LRR gene.

Molecular markers and allelic relationships of anthracnose resistance gene cluster B4 in common bean

Allelism tests and molecular marker analyses were combined to characterize the genes that, proceeding from the germplasm lines ‘A493’ and ‘A321’, confer resistance to bean anthracnose in the new breeding lines ‘A1220’ and ‘A1231’, respectively, developed through backcross breeding, using the dry bean landrace ‘Andecha’ as the recurrent parent. Allelism tests indicate that resistance to race 38 of anthracnose in genotypes ‘A1220’, ‘A1231’, and ‘BAT 93’ and in the differential cultivars ‘PI 207262’ and ‘Mexico 222’ is determined by different dominant alleles at the same locus. Therefore, the results obtained suggest that the so far considered as different genes Co-3 (described as present in ‘Mexico 222’) and Co-9 (described as present in ‘BAT 93’) are alleles of the same gene. RAPD markers OB12350, OAH181100, and OY171100 and SCAR markers SI19 and SW12 were found to be linked to the resistance gene. Data indicate that the resistance genes to race 38 present in these materials are alleles of the same R gene cluster located in linkage group B4, because markers OY171100, SI19 and SW12 were previously linked to this cluster. The SCAR markers SB12 and SAH18 were developed from RAPDs OB12350 and OAH181100, respectively, and a genetic map including the resistance gene and markers SB12, OY171100, SAH18, SW12 and SI19 was made using a F2 segregating population of 72 individuals derived from the cross ‘Andecha’ × ‘A493’.

A Comprehensive Review of the Major Genes Conditioning Resistance to Anthracnose in Common Bean

Resistance to anthracnose in common bean is conditioned primarily by nine major independent genes, Co-1 to Co-10 as the Co-3/Co-9 genes are allelic. With the exception of the recessive co-8 gene, all other nine are dominant genes and multiple alleles exist at the Co-1, Co-3 and Co-4 loci. A reverse of dominance at the Co-1 locus suggests that an order of dominance exists among individual alleles at this locus. The nine resistance genes Co-2 to Co-10 are Middle American in origin and Co-1 is the only locus from the Andean gene pool. Seven resistance loci have been mapped to the integrated bean linkage map and Co-1 resides on linkage group B1; Co-2 on B11, Co-3 on B4; Co-4 on B8; Co-6 on B7; and Co-9 and Co-10 are located on B4 but do not appear to be linked. Three Co-genes map to linkage groups B1, B4 and B11 where clusters with genes for rust resistance are located. In addition, there is co-localization with major resistance genes and QTL that condition partial resistance to anthracnose. Other QTL for resistance may provide putative map locations for the major resistance loci still to be mapped. Molecular markers linked to the majority of major Co-genes have been reported and these provide the opportunity to enhance disease resistance through marker-assisted selection and gene pyramiding. The 10 Co-genes are represented in the anthracnose differential cultivars, but are present as part of a multi-allelic series or in combination with other Co-genes, making the characterization of more complex races difficult. Although the Co-genes behave as major Mendelian factors, they most likely exist as resistance gene clusters as has been demonstrated on the molecular level at the Co-2 locus. Since the genes differ in their effectiveness in controlling the highly variable races of the anthracnose pathogen, the authors discuss the value of individual genes and alleles in resistance breeding and suggest the most effective gene pyramids to ensure long-term durable resistance to anthracnose in common bean.

Quantitative trait loci for leafhopper (Empoasca fabae and Empoasca kraemeri) resistance and seed weight in the common bean

AbstractA population of 108 common bean recombinant inbred lines (RILs) (F5:6‐9), derived from a leafhopper (Empoasca fabae and E. kraemeri)‐susceptible cultivar (‘Berna’) and a leafhopper‐resistant line (EMP 419) was used to identify molecular markers genetically linked to leafhopper resistance and seed weight. Bulked segregant analysis and quantitative trait analysis identified eight markers that were associated with resistance to E. fabae, and four markers that were associated with E. kraemeri resistance. Three markers were associated with resistance to both species. A partial linkage map of the bean genome was constructed. Composite interval mapping identified quantitative trait loci (QTL) for resistance to both leaf hopper species on core‐map linkage groups B1, B3 and B7. QTL for seed weight were found close to the locus controlling testa colour and an α‐phaseolin gene.

Segmental duplications within the Glycine max genome revealed by fluorescence in situ hybridization of bacterial artificial chromosomes.

Soybean (Glycine max L. Merr.) is presumed to be an ancient polyploid based on chromosome number and multiple RFLP fragments in genetic mapping. Direct cytogenetic observation of duplicated regions within the soybean genome has not heretofore been reported. Employing fluorescence in situ hybridization (FISH) of genetically anchored bacterial artificial chromosomes (BACs) in soybean, we were able to observe that the distal ends of molecular linkage group E had duplicated regions on linkage groups A2 and B2. Further, using fiber-FISH, it was possible to measure the molecular size and organization of one of the duplicated regions. As FISH did not require repetitive DNA for blocking fluorescence signals, we assume that the 200-kb genome region is relatively low in repetitive sequences. This observation, along with the observation that the BACs are located in distal euchromatin regions, has implications for genome structure/evolution and the approach used to sequence the soybean genome.

Molecular markers associated with linolenic acid content in soybean

AbstractAn altered FA profile with decreased linolenic (18∶3) acid in soybean germplasm was developed by crossing N97‐3708‐13, a soybean line with reduced 18∶3 (<5.4%) and ‘Anand’, a normal soybean cultivar (9.7% 18∶3). The resulting recombinant inbred lines are promising because they may promote healthier oil with improved oxidative stability and flavor. The objective of this study was to utilize the population N97‐3708‐13 × Anand to identify simple sequence repeat (SSR) markers associated with 18∶3 content. Two markers, Satt534 and Satt560, which are located approximately 10 cM apart from each other, near the Fan locus on linkage group B2, were identified as quantitative trait loci significantly associated with 18∶3 content (P=0.001, R2=0.59, individually). The SSR markers identified in this study should be useful for implementation of marker‐assisted selection for low‐18∶3 genotypes in soybean breeding programs.

Simple sequence repeat (SSR) markers linked to E1, E3, E4, and E7 maturity genes in soybean.

Soybean near isogenic lines (NILs), contrasting for maturity and photoperiod sensitivity loci, were genotyped with approximately 430 mapped simple sequence repeats (SSRs), also known as microsatellite markers. By analysis of allele distributions across the NILs, it was possible to confirm the map location of the Dt1 indeterminate growth locus, to refine the SSR mapping of the T tawny pubescence locus, to map E1 and E3 maturity loci with molecular markers, and to map the E4 and E7 maturity loci for the first time. Molecular markers flanking these loci are now available for marker-assisted breeding for these traits. Analysis of map locations identified a putative homologous relationship among four chromosomal regions; one in the middle of linkage group (LG) C2 carrying E1 and E7, one on LG I carrying E4, one at the top of LG C2, at which there is a reproductive period quantitative trait locus (QTL), and the fourth on LG B1. Other evidence suggests that homology also exists between the E1 + E7 region on LG C2 and a region on LG L linked to a pod maturity QTL. Homology relationships predict possible locations in the soybean genome of additional maturity loci, as well as which maturity loci may share a common evolutionary origin and similar mechanism(s) of action.

Tagging and mapping of genes and QTL and molecular marker-assisted selection for traits of economic importance in bean and cowpea

Bean/Cowpea Collaborative Research Support Program (B/C CRSP) scientists have successfully developed integrated consensus maps of the 11 linkage groups (LGs) in both bean ( Phaseolus vulgaris L.) and cowpea ( Vigna unguiculata L. Walp). The bean map is approximately 1200 cM with some 500 markers and an additional 500 markers shared with other bean maps. The cowpea map spans 2670 cM with over 400 markers. In addition to molecular markers, both maps include map locations of defense genes and phenotypic traits for disease and insect resistance, seed size, color and storage proteins, pod color and those traits associated with the domestication syndrome in bean. Since the bean and cowpea maps were developed independently, LGs with the same number probably refer to non-syntenic groups. Map locations of major resistance genes in bean are revealing gene clusters on LGs B1, B4, B7, and B11 for resistance to bean rust, anthracnose, common bacterial blight and white mold. Gene tagging and marker-assisted selection for disease resistance has progressed to a point where the indirect selection for resistance to a number of major diseases is now routine in bean breeding programs both in the US and overseas.

Introgression of a quantitative trait locus for yield from Glycine soja into commercial soybean cultivars.

The value of exotic germplasm in broadening the genetic base of most crops has been demonstrated many times. However, the difficulties involved in working with exotic germplasm have limited their utility in plant breeding. Unwanted linkages often thwart the successful incorporation of beneficial exotic genes into commercial lines. Thus, the use of exotics in traditional breeding makes the process of crop improvement a tedious, time-consuming and expensive endeavor. The availability of molecular markers makes it possible to isolate specific genomic regions and transfer them into commercial varieties with minimal linkage drag. We found a yield-enhancing quantitative trait locus (QTL) from Glycine soja (Siebold and Zucc.) by evaluating a population of 265 BC(2) individuals from a cross between HS-1 and PI 407305. The yield QTL was located on linkage group B2(U26) of the soybean [Glycine max (L.) Merrill] genetic linkage map. In a 2-year, multi-location study, individuals carrying the PI 407305 haplotype at the QTL locus demonstrated a 9.4% yield advantage over individuals that did not contain the exotic haplotype. When tested in a more uniform "HS-1-like" background in two locations, we observed an 8% yield advantage for lines that carry the PI 407305 haplotype. We further assessed the QTL effect in various elite soybean genetic backgrounds. The yield effect was consistently observed in only two of six genetic backgrounds. Individuals carrying the PI 407305 haplotype at the QTL locus had a 9% yield advantage in yield trials across locations. Despite the limited adaptability of this yield-QTL across genetic backgrounds, this study demonstrates the potential of exotic germplasm for yield enhancement in soybean.

Characterization of expressed NBS-LRR resistance gene candidates from common bean

A complex ancestral resistance (R) gene cluster, localized at the end of linkage group B4, and referred to as the B4 R gene cluster, has been previously genetically characterized. The B4 R gene cluster existed prior to the separation of the two major gene pools of cultivated common bean and contains several resistance specificities effective against the fungus Colletotrichum lindemuthianum. In this paper we report the molecular analysis of four expressed resistance gene candidates (RGCs) that map at the B4 R-cluster and co-localize with R-specificities or R-QTLs effective against C. lindemuthianum. These RGCs have been isolated from two genotypes that are representative of the two major gene pools of common bean: the BA8 and BA11 RGCs originating from the Mesoamerican BAT93 genotype, and the JA71 and JA78 RGCs originating from the Andean JaloEEP558 genotype. These RGCs encode NBS-LRR resistance-like proteins that are closely similar to the tomato I2 R-protein. Based upon sequence comparisons and genetic localization, we established that these four bean RGCs belong to two different subfamilies of R-sequences independently of their gene pool of origin. No feature discriminating the four RGCs according to their gene pool of origin has been observed yet. Comparative sequence analyses of the full-length RGCs and their flanking genomic sequences confirmed the ancestral origin of the B4 R-cluster.

Genetic and Sequence Analysis of Markers Tightly Linked to the Soybean mosaic virus Resistance Gene, Rsv3

Soybean mosaic virus (SMV) is a major viral pathogen, affecting soybean [Glycine max (L.) Merr.] production worldwide. The Rsv3 gene of soybean confers resistance to three of the most virulent strains (G5-G7) of SMV. The objectives of this study were to map Rsv3 and develop polymerase chain reaction (PCR) based markers for marker-assisted selection (MAS) purposes. Disease-response data were collected from two F(2) mapping populations, L29 (Rsv3) x Lee68 (rsv3) and Tousan 140 (Rsv3) x Lee68 (rsv3). Bulk segregant analysis based on amplified fragment length polymorphism (AFLP) markers demonstrated that the Rsv3 locus maps to the soybean molecular linkage group (MLG) B2 between restriction fragment length polymorphism (RFLP) markers A519 and Mng247. These two tightly linked RFLP markers were converted to PCR-based markers to expedite MAS. Sequence analysis of the Mng247 genomic region revealed similarity to the consensus sequence of a leucine-rich repeat (LRR) characteristic of the extracellular LRR class of disease resistance genes. Results from this study will be useful in pyramiding viral resistance genes and in cloning the Rsv3 gene.

Genetic mapping of QTLs conditioning soybean sprout yield and quality

Soybean sprouts have been used as a food in the Orient since ancient times. In this study, 92 restriction fragment length polymorphism (RFLP) loci and two morphological markers (W1 and T) were used to identify quantitative trait loci (QTLs) associated with soybean sprout-related traits in 100 F2-derived lines from the cross of ’Pureunkong’×’Jinpumkong 2’. The genetic map consisted of 76 loci which covered about 756 cM and converged into 20 linkage groups. Eighteen markers remained unlinked. Phenotypic data were collected in 1996 and 1997 for hypocotyl length, percentage of abnormal seedlings, and sprout yield 6 days after germination at 20°C. Hypocotyl length was determined as the average length from the point of initiation of the first secondary root to the point of attachment of the cotyledons. The number of decayed seeds and seedlings, plus the number of stunted seedlings (less than 2-cm growth), was recorded a s abnormal seedlings. Seed weight was determined based on the 50-seed sample. Sprout yield was recorded as the total fresh weight of soybean sprouts produced from the 50-seed sample divided by the dry weight of the 50-seed sample. Four QTLs were associated with sprout yield in the combined analysis across 2 years. For the QTL linked to L154 on the Linkage Group (LG) G the positive allele was derived from Pureunkong (R 2 = 0.19), whereas at the other three QTLs (A089 on LG B1, A668n on LG K and B046 on LG L) the positive alleles were from Jinpumkong 2. QTLs conditioning seed weight were linked to markers A802n (LG B1), A069 (LG E), Cr321 (LG F) and A235 (LG G). At these four markers, the Jinpumkong allele increased seed weight. Markers K011n on LG B1, W1 on LG F and A757 on LG L were linked to QTLs conditioning hypocotyl length; and Bng119, K455n and K418n to QTLs conditioning the abnormal seedlings. The QTLs conditioning sprout yield were in the same genomic locations as the QTLs for seed weight identified in this population or from previously published research, indicating that QTLs for sprout yield are genetically linked to seed-weight QTLs or else that seed-weight QTLs pleiotropically condition sprout yield. These data demonstrate that effective marker-assisted selection may be feasible for enhancing sprout yield in a soybean. The transgressive segregation of sprout yield, as well as the existence of two QTLs conditioning greater than 10% of the phenotypic variation in sprout yields provides an opportunity to select for progeny lines with a greater sprout yield than currently preferred cultivars such as Pureunkong.

Mapping Resistance to Multiple Races of Heterodera glycines in Soybean PI 89772

Breeding soybean [Glycine max (L.) Merr.] cultivars for resistance to soybean cyst nematode (SCN) [Heterodera glycines Ichinohe] is the most efficient means to control this pest. Evaluating and developing new resistance germplasm sources for soybean breeding is very important to prevent SCN from race shifts and provide durable resistance in soybean. We evaluated a newly found germplasm, soybean plant introduction (PI) 89772, which is resistant to SCN Races 1, 2, 3, 5, and moderately resistant to Race 14. The objectives were to identify molecular markers associated with SCN resistance, investigate resistant allelic relationships, and evaluate marker‐assisted selection efficiency. The F2 and F2:3 populations were produced by crossing PI 89772 with the susceptible soybean cultivar Hamilton. Thirty‐nine restriction fragment length polymorphism (RFLP) and 54 simple sequence repeat (SSR) markers found to be polymorphic were used to anchor loci conferring resistance to SCN Races 1, 2, 3, and 5. Two to three loci were found to give resistance to each SCN race. We found that resistance loci for different races could be anchored within the same region on linkage group (LG) G. A region on LG B1 was also shared by loci providing resistance to SCN Races 1, 2, and 5. Our results indicated that no single locus could provide complete resistance to any one SCN race. The major loci combinations provided high levels of resistance. We conclude that these markers could be highly useful in marker‐assisted selection.

Nutrient solution screening of Fe chlorosis resistance in soybean evaluated by molecular characterization

Nutrient solution systems have been considered an alternative method to field evaluations for studies of iron deficiency chlorosis (IDC) and for breeding soybeans with improved iron efficiency. To map genes controlling IDC in nutrient solution, 120 F24 lines in a Pride B216 × A15 population, and 92 F24 lines in an Anoka × A7 population were grown in nutrient solution in greenhouse plantings and evaluated for IDC by visual scores and determinations of chlorophyll concentrations. Eighty‐nine restriction fragment length polymorphism (RFLP) and 10 simple sequence repeat (SSR) markers in the Pride B216 x A15 population, and 82 RFLP, 14 SSR and one morphological (hilum color) markers in the Anoka x A7 population were used to construct linkage maps and to locate quantitative trait loci (QTL) controlling IDC. In the Anoka × A7 population, one major gene on linkage group N, and modifying QTL on linkage groups A1 and I previously mapped during field tests also were identified in the nutrient solution test. Different genetic linkage groups in soybean have been identified by letters, and as such will be used throughout the paper. One newly identified QTL was mapped on linkage group B2. In the Pride B216 × A15 population, one QTL previously mapped on linkage group I during field tests was not identified in the nutrient solution test, and two newly identified QTL were mapped on linkage groups A2 and B1. QTL on linkage groups B2, G, H, L, and N were identified in both field and nutrient solution tests. Due to significant interaction between genotype and environment in both field and nutrient solution tests, QTL identifications from multiple environments were used to compare the similarity between field and nutrient solution tests. We concluded that similar QTL are identified in nutrient solution and field tests and therefore, both systems identify similar genetic mechanisms of iron uptake and/or utilization.

Integration of simple sequence repeat (SSR) markers into a molecular linkage map of common bean (Phaseolus vulgaris L.).

Microsatellite or simple sequence repeat (SSR) markers have been successfully used for genomic mapping, DNA fingerprinting, and marker-assisted selection in many plant species. Here we report the first successful assignment of 15 SSR markers to the Phaseolus vulgaris molecular linkage map. A total of 37 SSR primer pairs were developed and tested for amplification and product-length polymorphism with BAT93 and Jalo EEP558, the parental lines of an F7 recombinant inbred (RI) population previously used for the construction of a common bean molecular linkage map. Sixteen of the SSRs polymorphic to the parental lines were analyzed for segregation and 15 of them were assigned to seven different linkage groups, indicating a widespread distribution throughout the bean genome. Map positions for genes coding for DNAJ-like protein, pathogenesis-related protein 3, plastid-located glutamine synthetase, endochitinase, sn-glycerol-3 phosphate acyltransferase, NADP-dependent malic enzyme, and protein kinase were determined for the first time. Addition of three SSR loci to linkage group B4 brought two separated smaller linkage groups together to form a larger linkage group. Analysis of allele segregation in the F7 RI population revealed that all 16 SSRs segregated in the expected 1:1 ratio. These SSR markers were stable and easy to assay by polymerase chain reaction (PCR). They should be useful markers for genetic mapping, genotype identification, and marker-assisted selection of common beans.

Inheritance of partial resistance against Colletotrichum lindemuthianum in Phaseolus vulgaris and co-localization of quantitative trait loci with genes involved in specific resistance.

Anthracnose, one of the most important diseases of common bean (Phaseolus vulgaris), is caused by the fungus Colletotrichum lindemuthianum. A "candidate gene" approach was used to map anthracnose resistance quantitative trait loci (QTL). Candidate genes included genes for both pathogen recognition (resistance genes and resistance gene analogs [RGAs]) and general plant defense (defense response genes). Two strains of C. lindemuthianum, identified in a world collection of 177 strains, displayed a reproducible and differential aggressiveness toward BAT93 and JaloEEP558, two parental lines of P. vulgaris representing the two major gene pools of this crop. A reliable test was developed to score partial resistance in aerial organs of the plant (stem, leaf, petiole) under controlled growth chamber conditions. BAT93 was more resistant than JaloEEP558 regardless of the organ or strain tested. With a recombinant inbred line (RIL) population derived from a cross between these two parental lines, 10 QTL were located on a genetic map harboring 143 markers, including known defense response genes, anthracnose-specific resistance genes, and RGAs. Eight of the QTL displayed isolate specificity. Two were co-localized with known defense genes (phenylalanine ammonia-lyase and hydroxyproline-rich glycoprotein) and three with anthracnose-specific resistance genes and/or RGAs. Interestingly, two QTL, with different allelic contribution, mapped on linkage group B4 in a 5.0 cM interval containing Andean and Mesoamerican specific resistance genes against C. lindemuthianum and 11 polymorphic fragments revealed with a RGA probe. The possible relationship between genes underlying specific and partial resistance is discussed.

Definition of Soybean Genomic Regions That Control Seed Phytoestrogen Amounts.

Soybean seeds contain large amounts of isoflavones or phytoestrogens such as genistein, daidzein, and glycitein that display biological effects when ingested by humans and animals. In seeds, the total amount, and amount of each type, of isoflavone varies by 5 fold between cultivars and locations. Isoflavone content and quality are one key to the biological effects of soy foods, dietary supplements, and nutraceuticals. Previously we had identified 6 loci (QTL) controlling isoflavone content using 150 DNA markers. This study aimed to identify and delimit loci underlying heritable variation in isoflavone content with additional DNA markers. We used a recombinant inbred line (RIL) population (n=100) derived from the cross of “Essex” by “Forrest,” two cultivars that contrast for isoflavone content. Seed isoflavone content of each RIL was determined by HPLC and compared against 240 polymorphic microsatellite markers by one-way analysis of variance. Two QTL that underlie seed isoflavone content were newly discovered. The additional markers confirmed and refined the positions of the six QTL already reported. The first new region anchored by the marker BARC_Satt063 was significantly associated with genistein (P=0.009, R2=29.5%) and daidzein (P=0.007 , R2=17.0%). The region is located on linkage group B2 and derived the beneficial allele from Essex. The second new region defined by the marker BARC_Satt129 was significantly associated with total glycitein (P=0.0005 , R2=32.0%). The region is located on linkage group D1a+Q and also derived the beneficial allele from Essex. Jointly the eight loci can explain the heritable variation in isoflavone content. The loci may be used to stabilize seed isoflavone content by selection and to isolate the underlying genes.