Linear Range Research Articles

A novel electrochemical sensor for the detection of metronidazole residues in food samples

The widespread use and misuse of antibiotics in pharmaceuticals and animal farming has resulted in their accumulation in food sources and the environment, posing significant threats to human health, the environment, and the global economy. In this study, we have developed a hypersensitive, and ultra-selective electrochemical sensor, the first of its kind, by integrating a thermally annealed gold-silver alloy nanoporous matrix (TA-Au-Ag-ANpM) with reduced graphene oxide (r-GO) and poly(glycine) at the surface of a glassy carbon electrode (GCE). This sensor aims to detect life-threatening metronidazole (MTZ) residues in food samples. TA-Au-Ag-ANpM/r-GO/poly(glycine)/GCE was thoroughly characterized using a range of analytical techniques, including UV–Vis, FT-IR, XRD, SEM, and EDX. Furthermore, its electrochemical properties were investigated by cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS). The sensor exhibited outstanding performance, with a broad linear range of 2.0 pM–410 μM. The limits of detection (LOD) and quantification (LOQ) were determined to be 0.0312 pM and 0.104 pM, respectively. The TA-Au-Ag-ANpM/r-GO/poly(glycine)/GCE exhibited exceptional reproducibility, repeatability, stability, and resistance to interferences. Moreover, the sensor demonstrated outstanding performance in detecting MTZ residues in milk powder, pork, and chicken meat samples, achieving very good recoveries (96.9%–101.4%) with a relative standard deviation (RSD) below 5%. This performance highlights the potential for practical applications in food safety and quality monitoring. Therefore, the developed sensor contributes to the advancement of electrochemical sensing technology and its application in ensuring food safety and integrity by combating antibiotic residues.

A novel sustainable immunoassay for sensitive detection of atrazine based on the anti-idiotypic nanobody and recombinant full-length antibody

Immunoassays have been widely used to determine small-molecule compounds in food and the environment, meeting the challenge of obtaining false positive or negative results because of the variance in the batches of antibodies and antigens. To resolve this problem, atrazine (ATR) was used as a target, and anti-idiotypic nanobodies for ATR (AI-Nbs) and a recombinant full-length antibody against ATR (ATR-rAb) were prepared for the development of a sustainable enzyme-linked immunosorbent assay (ELISA). AI-Nb-7, AI-Nb-58, and AI-Nb-66 were selected from an immune phage display library. ATR-rAb was produced in mammalian HEK293 (F) cells. Among the four detection methods explored, the assay using AI-Nb-66 as a coating antigen and ATR-rAb as a detection reagent yielded a half maximal inhibitory concentration (IC50) of 1.66 ng mL−1 for ATR and a linear range of 0.35 − 8.73 ng mL−1. The cross-reactivity of the assay to ametryn was 64.24 %, whereas that to terbutylazine was 38.20 %. Surface plasmon resonance (SPR) analysis illustrated that these cross-reactive triazine compounds can bind to ATR-rAb to varying degrees at high concentrations; however, the binding/dissociation kinetic curves and the response values at the same concentration are different, which results in differences in cross-reactivity. Homology modeling and molecular docking revealed that the triazine ring is vital in recognizing triazine compounds. The proposed immunoassay exhibited acceptable recoveries of 84.40 − 105.36 % for detecting fruit, vegetables, and black tea. In conclusion, this study highlights a new strategy for developing sustainable immunoassays for detecting trace pesticide contaminants.

A sandwich-structured multifunctional platform based on self-assembled Ti3C2Tx@Au NPs films, antibiotics, and silent region SERS probe for the capture, determination, and drug resistance analysis of Gram-positive bacteria.

A multifunctional surface-enhanced Raman scattering (SERS) platform integrating sensitive detection and drug resistance analysis was developed for Gram-positive bacteria. The substrate was based on self-assembled Ti3C2Tx@Au NPs films and capture molecule phytic acid (IP6) to achieve specific capture of Gram-positive bacteria and different bacteria were analyzed by fingerprint signal. It had advantages of good stability and homogeneity (RSD = 8.88%). The detection limit (LOD) was 102CFU/mL for Staphylococcus aureus and 103CFU/mL for MRSA, respectively. A sandwich structure was formed on the capture substrate by signal labels prepared by antibiotics (penicillin G and vancomycin) and non-interference SERS probe molecules (4-mercaptobenzonitrile (2223cm-1) and 2-amino-4-cyanopyridine (2240cm-1)) to improve sensitivity. The LOD of Au NPs@4-MBN@PG to S. aureus and Au NPs@AMCP@Van to MRSA and S. aureus were all improved to 10 CFU/mL, with a wide dynamic linear range from 108 to 10CFU/mL (R2 ≥ 0.992). The SERS platform can analyze the drug resistance of drug-resistant bacteria. Au NPs@4-MBN@PG was added to the substrate and captured MRSA to compare the SERS spectra of 4-MBN. The intensity inhomogeneity of 4-MBN at the same concentrations of MRSA and the nonlinearity at the different concentrations of MRSA revealed that MRSA was resistant to PG. Finally, the SERS platform achieved the determination of MRSA in blood. Therefore, this SERS platform has great significance for the determination and analysis of Gram-positive bacteria.

Two-dimensional hydrophilic imprinted resin–graphene oxide composite for selective extraction and rapid determination of gibberellin traces in licorice samples

This study presents novel methodologies and materials for selectively and sensitively determining gibberellin traces in licorice to address food safety concerns. A novel hydrophilic imprinted resin–graphene oxide composite (HMIR–GO) was developed with fast mass transfer, high adsorption capacity, and exceptional aqueous recognition performance for gibberellin. Leveraging the advantages of molecular imprinting, hydrophilic resin synthesis, and rapid mass transfer characteristics of GO, HMIR–GO was employed as an adsorbent, showing resistance to matrix interference. Coupled with HPLC, a rapid and selective method for determining gibberellin was established. Under optimal conditions, the method exhibited a wide linear range (0.02–5.00 μg g−1, r = 0.9999), low detection limits (3.3 ng g−1), and satisfactory recoveries (92.0–98.4%), enabling the accurate and rapid detection of gibberellin in licorice. This study introduces a pioneering strategy for the selective extraction and determination of trace gibberellin levels, offering insights for similar applications in functional foods.

Bifunctional oxidase-peroxidase mimicking Fe–Ce MOF on paper-based analytical devices to intensify luminol chemiluminescence: Application for measuring different sugars with a smartphone readout

This study presents a potent paper-based analytical device (PAD) for quantifying various sugars using an innovative bi-nanozyme made from a 2-dimensional Fe/Ce metal-organic framework (FeCe-BTC). The MOF showed excellent bifunctional peroxidase-oxidase activities, efficiently catalyzing luminol's chemiluminescence (CL) reaction. As a peroxidase-like nanozyme, FeCe-BTC could facilitate the dissociation of hydrogen peroxide (H2O2) into hydroxyl radicals, which then oxidize luminol. Additionally, it was also discovered that when reacting with H2O2, the MOF turns into a mixed-valence MOF, and acts as an oxidase nanozyme. This activity is caused by the generated Ce4+ ions in the structure of MOF that can directly oxidize luminol. The MOF was directly synthesized on the PAD and cascaded with specific natural enzymes to establish simple, rapid, and selective CL sensors for the measurement of different sugars. A cell phone was also used to record light intensities, which were then correlated to the analyte concentration. The designed PAD showed a wide linear range of 0.1–10 mM for glucose, fructose, and sucrose, with detection limits of 0.03, 0.04, and 0.04 mM, respectively. It showed satisfactory results in food and biological samples with recovery values ranging from 95.8 to 102.4 %, which makes it a promising candidate for point-of-care (POC) testing for food control and medicinal purposes.

Quantification of Allergic Crustacean Tropomyosin Using Shared Signature Peptides in Processed Foods with a Mass Spectrometry-Based Proteomic Strategy.

Crustacean shellfish are major allergens in East Asia. In the present study, a major allergic protein in crustaceans, tropomyosin, was detected accurately using multiple reaction monitoring mode-based mass spectrometry, with shared signature peptides identified through proteomic analysis. The peptides were deliberately screened through thermal stability and enzymatic digestion efficiency to improve the suitability and accuracy of the developed method. Finally, the proposed method demonstrated a linear range of 0.15 to 30 mgTM/kgfood (R2 > 0.99), with a limit of detection of 0.15 mgTM/kg food and a limit of quantification of 0.5mgTM/kgfood and successfully applied to commercially processed foods, such as potato chips, biscuits, surimi, and hot pot seasonings, which evidenced the applicability of proteomics-based methodology for food allergen analysis.

Gold nanostructure-enhanced immunosensing: ultra-sensitive detection of VEGF tumor marker for early disease diagnosis

We present an advanced electrochemical immunosensor designed to detect the vascular endothelial growth factor (VEGF) precisely. The sensor is constructed on a modified porous gold electrode through a fabrication process involving the deposition of silver and gold on an FTO substrate. Employing thermal annealing and a de-alloying process, the silver is eliminated from the electrode, producing a reproducible porous gold substrate. Utilizing a well-defined protocol, we immobilize the heavy-chain (VHH) antibody against VEGF on the gold substrate, facilitating VEGF detection through various electrochemical methods. Remarkably, this immunosensor performs well, featuring an impressive detection limit of 0.05 pg/mL and an extensive linear range from 0.1 pg/mL to 0.1 µg/mL. This emphasizes it’s to measure biomarkers across a wide concentration spectrum precisely. The robust fabrication methodology in this research underscores its potential for widespread application, offering enhanced precision, reproducibility, and remarkable detection capabilities for the developed immunosensor.

QUANTIFICATION AND QUALITY CONTROL OF TRIPLE-DRUG COMBINATION EMPLOYED FOR GASTRIC ULCER USING STABILITY-INDICATING SELECTIVE RP-HPLC TECHNIQUE

Objective: A seven-day regimen consisting of vonoprazan (VNP), amoxicillin (AXC) and clarithromycin (CRC), administered twice daily, has been permitted and reimbursed by health coverage as initial therapy. No technique has been implemented yet to determine the quantities of VNP, AXC, and CRC combination. This work effectively aimed at estimating these medications (VNP, AXC, and CRC) at the same time by developing an HPLC technique that saves money and time. Methods: The VNP, AXC, and CRC were separated in a “Waters” column (C18 nature; 250 mm sized length; 4.6 mm sized internal diameter; 5 µm sized particle; 25 °C temperature). Phosphoric acid (0.1% in water; pH 4.2) and absolute methanol (50:50, v/v) comprise the mobile phase. The drug product, Voqueznatripak, was subjected to hydrolysis, oxidation, photolysis, and thermal stressors with the intent to cause enforced degradation. The suggested "HPLC conditions" were verified in compliance with ICH guidance. Results: The measurements had a linear range of 10–20 µg/ml for VNP and 250–750 µg/ml for AXC and CRC. The AXC, CRC, and VNP had LOQ’s 5.302 µg/ml, 5.487 µg/ml and 0.523 µg/ml, respectively. Precision measurements were<0.2% RSD and accuracy ranges were 99.40% to 101.46%. The newly devised “HPLC conditions” specificity attribute and stability-indicating quality were also validated by forced degradation tests. Conclusion: The newly devised “HPLC conditions” for analysing AXC, CRC, and VNP in formulation dosage form and stability samples might be adapted by quality control laboratories. The devised “HPLC conditions” is qualified and consistent to reveal and detect any probable change in the drug product assessments throughout stability experiments.

A selective fluorescent probe derived from benzo[d]imidazole for carbon dioxide detection and bioimaging

In this work, a benzo[d]imidazole-derived fluorescent probe, DCBIF, was developed for the carbon dioxide (CO2) detection and imaging in living lung cells. On the basis of investigating previous reports and modifying the test method, the in-solution experiments showed that DCBIF exhibited the fluorescence response at 420 nm to CO2 under the excitation of 350 nm. The response was steady and rapid in physiological conditions. The linear range of the detecting system covered the practical necessity, and the limit of detection was 0.002 mL/min. There were few reports for detecting CO2 depicted the intracellular imaging while the cells were not pulmonary. Herein, in all the tested groups including oxygen-rich, hypoxia, and hypoxia recovered, DCBIF realized the imaging of the CO2 level in living A549 lung cells. This work was meaningful for developing fluorescent implements and imaging scenarios.

One-step growth of Cu-doped carbon dots in amino-modified carbon nanotube-modified electrodes for sensitive electrochemical detection of BPA.

Copper-doped carbon dots and aminated carbon nanotubes (Cu-CDs/NH2-CNTs) nanocomposites were synthesized by a one-step growth method, and the composites were characterized for their performance. An electrochemical sensor for sensitive detection of bisphenol A (BPA) was developed for using Cu-CDs/NH2-CNTs nanocomposites modified with glassy carbon electrodes (GCE). The sensor exhibited an excellent electrochemical response to BPA in 0.2M PBS (pH 7.0) under optimally selected conditions. The linear range of the sensor for BPA detection was 0.5-160μM, and the detection limit (S/N = 3) was 0.13μM. Moreover, the sensor has good interference immunity, stability and reproducibility. In addition, the feasibility of the practical application of the sensor was demonstrated by the detection of BPA in bottled drinking water and Liu Yang River water.

An antifouling electrochemical biosensor using self-signal for Salmonella typhimurium direct detection in food sample

Eating food contaminated by foodborne pathogens can lead to illness. The development of electrochemical sensors for pathogen detection has received widespread attention. However, the analytical performance of electrochemical sensors is inevitably affected by the non-specific adsorption of molecules in the sample. Moreover, the external signal probes might be affected by the complex components in the sample accompanied with signal suppression. This work presents an electrochemical aptasensor for Salmonella typhimurium detection based on the self-signal of poly-xanthurenic acid and the antifouling ability of chondroitin sulfate. The detection time was 60 min. The linear range was from 101 to 107 CFU/mL, and the detection limit was 3 CFU/mL. The biosensors presented good repeatability and storage stability. And the biosensors has been successfully applied in milk and orange juice. This strategy is expected to be applied in the design of other antifouling biosensors, to achieve rapid detection of pathogens and ensure food safety.

Bacterial cellulose-supported dual-layered nanofibrous adsorbent for thin-film micro-solid-phase extraction of antibiotics in municipal wastewaters

In this study, bacterial cellulose was coated with composite nanofibers of polyvinyl alcohol doped with beta cyclodextrin and alginate (PVA-SA-βCD), constructed using the electrospinning technique. This novel material served as an effective adsorbent for thin-film micro-solid-phase extraction (TF-μSPE) of antibiotics from water samples, followed by HPLC-UV analysis. The adsorbent was subjected to a comprehensive characterization using ATR-FTIR, FE-SEM, and BET techniques. These analyses provided valuable insights into its physicochemical structure and properties. Several key parameters that affect the performance of the TF-μSPE method were investigated including electrospinning factors (voltage, flow rate, needle tip-collector distance, and electrospinning time), desorption solvent type and volume, adsorbent dose, adsorption and desorption times, pH value, and salt percentage. Under the optimized conditions, the limits of detections and quantifications for target antibiotics were obtained in the ranges of 0.02–0.03 and 0.07–0.1 μg L⁻1, respectively. The linear range was 0.07–1000 μg L⁻1 with satisfactory determination coefficients (r2) of 0.9944–0.9984. The intra-day and inter-day precisions were obtained as 1.1–1.7 % and 2.2–3.5 %, respectively. The developed method was successfully applied to determine antibiotics in municipal wastewater samples, yielding recoveries within the range of 70–100 % (RSD%<3.7). The green features of the method were also assessed based on AGREE tool. This is the first report on the fabrication of a double-layered nanofibrous adsorbent and its application for the adsorption of antibiotics in wastewater. This robust approach combines efficiency with analytical accuracy, making it a valuable tool for antibiotic analysis in environmental samples.

A new electrochemical biosensor based on graphene oxide for rapid detection of synthetic testosterone as performance-enhancing drugs in athletes

This study showcases the successful development of a hybrid reduced graphene oxide-metal organic framework modified glassy carbon electrode (rGO-MOFs/GCE) electrochemical biosensor for the detection of synthetic testosterone (TST) as a performance-enhancing drug in athletes. The results demonstrate a linear relationship between the voltametric responses and the testosterone concentration, indicating the sensor's effectiveness in measuring TST. Furthermore, the sensor's performance in detecting TST in real human serum samples from athletes was also validated. The sensor's linear range and detection limit are comparable, if not superior, to those of other recently developed electrochemical sensors, positioning it as a promising tool for TST detection. Additionally, the method's selectivity was assessed and found to be unaffected by substances typically present in biological fluids and food samples, further affirming the sensor's reliability. The application of the rGO/MOF/GCE sensor to detecting and quantifying TST in actual human serum samples yielded favorable results. The synergistic effects of rGO and MOF, which improve the electrical conductivity and biocompatibility of MOF and the porosity and catalytic activity of rGO, are responsible for the sensor's enhanced performance in terms of sensitivity, selectivity, stability, and response time. These findings underscore the potential of the rGO/MOF/GCE sensor platform for various biomedical applications.

Ultrasensitive detection of chlortetracycline in animal-origin food using molecularly imprinted electrochemical sensor based on SnS2/ZnCo-MOF and AuNPs

The chlortetracycline (CTC) residue in food poses a threat to human health. Therefore, developing sensitive, convenient and selective analytical methods for CTC detection is crucial. This study innovatively uses tin disulfide/bimetallic organic framework (SnS2/ZnCo-MOF) nanocomposites in conjunction with gold nanoparticles (AuNPs) to co-modify a glassy carbon electrode (GCE). Further, a molecularly imprinted polymer (MIP)-based electrochemical sensing platform Au-MIP/SnS2/ZnCo-MOF/Au/GCE (AZG) was fabricated for selective CTC detection. SnS2/ZnCo-MOF enhanced the stability and surface area of the AZG sensor. The presence of AuNPs facilitated electron transport between the probe and the electrode across the insulating MIP layer. The fixation of AuNPs and MIP via electropolymerization enhanced the selective recognition of this sensor and amplified its output signal. The AZG sensor demonstrated a wide linear detection range (0.1–100 μM), low detection limit (0.072 nM), and high sensitivity (0.830 μA μM−1). It has been used for detecting CTC in animal-origin food with good recovery (96.08%–104.60%).

Electrochemiluminescent quenching of luminol–doped Zr–MOFs for ATP detection through scavenging ROS using gallic acid–capped Au nanoparticles

In the present study, the highly efficient electrochemiluminescence (ECL) luminophores of Zr-based metal–organic frameworks (MOFs) coordinating with the amino group of luminol (Zr–Lu–MOFs) were developed for fabricating a sensing platform. The ECL emission of a Zr–Lu–MOF/H2O2 system with strong and stable ECL signals was triggered through cyclic voltammetry. Adenosine triphosphate (ATP) was firmly assembled on Zr–Lu–MOF because of the high affinity of Zr4+ toward phosphate groups. ATP was detected using gallic acid (GA)-capped Au (GA@Au) nanoparticles combined with an ATP aptamer. The GA@Au nanoparticles quenched the ECL behavior of the luminol/H2O2 system, and the quenching mechanism was ascribed to the GA scavenging superoxide radical (O2•−) that was generated via the electron redox reaction in H2O2. Under optimal experiments, an ECL biosensor with a linear range of 0.100–1000 nM and a detection limit of 0.0353 nM (S/N = 3) was designed for the selective and sensitive detection of ATP. Thus, the proposed ECL biosensor exhibited good performance with high stability and acceptable fabrication reproducibility, providing a valuable strategy for clinical diagnostics and therapeutics.

Simultaneous determination of unecritinib (TQ-B3101) and its active metabolite crizotinib in rat plasma by LC-MS/MS：An application to pharmacokinetic studies

Unecritinib (TQ-B3101) is a selective tyrosine kinase receptor inhibitor. In the study, in vitro metabolic experiments revealed that the hydrolysis of TQ-B3101 was mainly catalyzed by carboxylesterase 2 (CES2), followed by CES1. Next, a sensitive and reliable LC-MS/MS method was established for the simultaneous determination of TQ-B3101 and its metabolite crizotinib in rat plasma. To prevent in vitro hydrolysis of TQ-B3101, sodium fluoride, the CESs inhibitor at a concentration of 2 M, was immediately added after whole blood collection. Plasma samples were extracted by acetonitrile-induced protein precipitation method, and chromatographically separated on a Gemini C18 column (50 mm × 2.0 mm i.d., 5 μm) using gradient elution with a mobile phase of 0.1% formic acid and 5 mmol/L ammonium acetate with 0.1% formic acid. The retention times for TQ-B3101 and crizotinib were 2.61 and 2.38 min, respectively. The analytes were detected with tandem mass spectrometer by positive electrospray ionization, using the ion transitions at m/z 492.3 → 302.3 for TQ-B3101, m/z 450.3 → 260.3 for crizotinib, and m/z 494.0 → 394.3 for imatinib (internal standard). Method validation was conducted in the linear range of 1.00–800 ng/mL for the two analytes. The precision, accuracy and stabilities all met the acceptance criteria. The pharmacokinetic study indicated that TQ-B3101 was rapidly hydrolyzed to crizotinib with the elimination half-life of 1.11 h after a single gavage administration of 27 mg/kg to Sprague-Dawley rats, and the plasma exposure of TQ-B3101 was only 2.98% of that of crizotinib.

Multiple signal-enhanced electrochemiluminescence aptamer sensors based on carboxylated ruthenium (II) complexes for acetamiprid detection

BackgroundRapid and sensitive detection for acetamiprid, a kind of widely used neonicotinoid insecticide, is very meaningful for the development of modern agriculture and the protection of human health. Highly stable electrochemiluminescence (ECL) materials are one of the key factors in ECL sensing technology. ECL materials prepared by porous materials (e.g., MOFs) coated with chromophores have been used for ECL sensing detection, but these materials have poor stability because the chromophores escape when they are in aqueous solution. Therefore, the development of highly stable ECL materials is of great significance to improve the sensitivity of ECL sensing technology. ResultsIn this work, by combining etched metal-organic frameworks (E-UIO-66-NH2) as carrier with Tris(4,4′-dicarboxylic acid-2,2′-bipyridine)Ru(II) chloride (Ru(dcbpy)32+) as signal probe via amide bonds, highly stable nanocomposites (E-UIO-66-NH2-Ru) with excellent ECL performance were firstly prepared. Then, using MoS2 loaded with AuNPs as substrate material and co-reactant promoter, a signal off-on-off ECL aptamer sensor was prepared for sensitive detection of acetamiprid. Due to the excellent catalytic activity of E-UIO-66-NH2-Ru and MoS2@Au towards K2S2O8, the ECL signals can be enhanced by multiple signal enhancement pathways, the prepared ECL aptamer sensor could achieve sensitive detection of acetamiprid in the linear range of 10−13 to10−7 mol L−1, with the limit of detection (LOD) of 2.78ⅹ10−15 mol L−1 (S/N = 3). After the evaluation of actual sample testing, this sensing platform was proven to be an effective method for the detection of acetamiprid in food and agricultural products. Significance and noveltyThe E-UIO-66-NH2-Ru prepared by linking Ru(dcbpy)32+ to E-UIO-66-NH2 via amide bonding has very high stability. The synergistic catalytic effect of MoS2 and AuNPs enhanced the ECL signal. By exploring the sensing mechanism and evaluating the actual sample tests, the proposed signal "on-off" ECL sensing strategy was proved to be an effective and excellent ECL sensing method for sensitive and stable detection of acetamiprid.

Analysis of Seven Terpenoids by HS-SPME Coupled with GC-MS for the Identification and Classification of Different Teas

Background: Terpenoids are essential aroma substances in teas, and their concentration brings various characteristics to different teas. Therefore, developing a simple and stable method is necessary for distinguishing tea categories. Objective: In previous studies, more attention was paid to non-chiral isomers of terpenes due to the challenges of separating chiral isomers. So, this paper aims to present a method for effectively separating seven terpenoid substances, including chiral isomers and non-chiral isomers, to facilitate the classification and identification of teas. objective: In previous studies, more attention was paid to non-chiral isomers of terpeniods due to the challenges with separating chiral isomers. So, this paper aims to present a method for effectively separating seven terpenoid substances, including chiral isomers and non-chiral isomers, to facilitate the classification and identification of teas. Methods: A method utilizing headspace solid-phase microextraction coupled with gas chromatography- mass spectrometry was used to isolate and analyze 7 terpenoid compounds. After optimized conditions, the BGB-176 chiral column and the PDMS/DVB fiber were selected for subsequent analysis. Results: This method has a good linear range of 0.1-200 mg/L, and its linear correlation coefficients are between 0.9974 and 0.9994, and the limit of detection and the limit of quantification is 0.02–0.03 and 0.06–0.09 mg/L, respectively. Only five terpenoid substances were detected in a total of 15 tea samples. Furthermore, In the detection of carvon and α-ionone optical isomers, the S isomer was mainly detected. Conclusions: An effective approach was developed to separate and analyze 7 terpenoid compounds in natural and synthetic teas. Meanwhile, 15 tea samples can be identified and classified using principal component analysis.

A Novel Potentiometric Coated Wire Sensor Based on Functionalized Polymeric CaO/ZnO Nanocomposite Synthesized by Lavandula Spica Mediated Extract for Terbinafine Determination

AbstractThe unique properties of calcium oxide (CaO) and zinc oxide (ZnO) at the nanoscale have attracted the interest of scientists as promising electrically conductive substances for sensing purposes. The content of terbinafine hydrochloride (TRF) in pharmaceutical tablets was determined using a novel coated, wire‐functionalized CaO/ZnO nanocomposite membrane sensor biogenically produced from Lavandula spica extract. Sodium tetraphenylborate was used to prepare the active material (TRF‐TBP). The newly modified sensor gave excellent potentiometric sensitivity with the least squares regression equation EmV=(−58.88X±0.3)+log [TRF]+549.78 and covered a wide linear range (5.0×10−9–1.0×10−2 mol/L) of TRF samples. In contrast, the standard TRF‐TBP sensor wasn't as sensitive when (2.5×10−6–1.0×10−2 mol/L). TRF solutions with regression equation of (−55.728X±0.7)+log [TRF]+396.64. The appropriate pH range was 3–6. The principles of analytical methodology were applied to investigate the validity and suitability of the proposed technique. The proposed sensors were found to be suitable and efficient for the detection of TRF on tablets.

Electrochemical cytosensor utilizing tetrahedral DNA/bimetallic AuPd holothurian-shaped nanoparticles for ultrasensitive non-destructive detection of circulating tumor cells.

As a real-time fluid biopsy method, the detection of circulating tumor cells (CTCs) provides important information for the early diagnosis, precise treatment, and prognosis of cancer. However, the low density of CTCs in the peripheral blood hampers their capture and detection with high sensitivity and selectivity using currently available methods. Hence, we designed a sandwich-type electrochemical aptasensor that utilizes holothurian-shaped AuPd nanoparticles (AuPd HSs), tetrahedral DNA nanostructures (TDNs), and CuPdPt nanowire networks (NWs) interwoven with a graphdiyne (GDY) sheet for ultrasensitive non-destructive detection of MCF-7 breast cancer cells. CuPdPt NW-GDY effectively enhanced the electron transfer rate and coupled with the loaded TDNs. The TDNs could capture MCF-7 cells with precision and firmness, and the resulting composite complex was combined with AuPd HSs to form a sandwich-type structure. This novel aptasensor showed a linear range between 10 and 106 cells mL-1 and an ultralow detection limit of 7 cells mL-1. The specificity, stability, and repeatability of the measurements were successfully verified. Moreover, we used benzonase nuclease to achieve non-destructive recovery of cells for further clinical studies. According to the results, our aptasensor was more sensitive measuring the number of CTCs than other approaches because of the employment of TDNs, CuPdPt NW-GDY, and AuPd HSs. We designed a reliable sensor system for the detection of CTCs in the peripheral blood, which could serve as a new approach for cancer diagnosis at an early stage.