Linear Isomers Research Articles

Occurrence and Fate of Fluoroalkyl Sulfonamide-Based Copolymers in Earthworms-Bioavailability, Transformation, and Potential Impact of Sludge Application.

To date, considerable knowledge and data gaps regarding the occurrence, environmental levels, and fate of polymeric perfluoroalkyl and polyfluoroalkyl substances (PFAS) exist. In the present study availability, accumulation, and transformation of C4- and C8-fluoroalkylsulfonamide (FASA)-based copolymers were assessed in laboratory-grown earthworms (Eisenia fetida, triplicate of exposure tests and control). Further, a field study on earthworms (18 pooled samples) in sludge-amended soil was conducted to assess the environmental impact of sludge-amended soil with regard to the FASA-based copolymers, together with the applied sludge (n = 3), and the field soils during the period (n = 4). In the laboratory study, the FASA-based copolymers were taken up by the earthworms in concentrations between 19 and 33 ng/g of dw for the C8- and between 767 and 1735 ng/g of dw for the C4-FASA-based copolymer. Higher biota soil accumulation factors (BAFs) were observed for the copolymer with a longer perfluorinated side-chain length (C8, average BAF value of 0.7) compared to the copolymer with a shorter side-chain length (C4, average BAF value of 0.02). Perfluorooctane sulfonamidoacetates (FOSAAs) and perfluorooctane sulfonamide (FOSA), including both branched and linear isomers, were detected after exposure to the C8-FASA-based copolymer. Two metabolites were detected in the earthworms exposed to the C4-FASA-based copolymer: perfluorobutanesulfonamide (FBSA) and perfluorobutanesulfonic acid (PFBS). Although the presence of other monomers or impurities in the copolymer formulation cannot be ruled out, the present laboratory study suggests that the FASA-based copolymers may be an indirect source of lower molecular weight PFAS in the environment through transformation. Elevated levels of C8-FASA-based copolymer were found in the field sludge-amended soil compared to nontreated soil (32 versus 11 ng/g d.w.), and higher concentrations of PFAS in earthworms living in sludge-amended soil compared to nontreated soil (566 versus 103 ng/g d.w.) were observed. These findings imply that the application of sludge is a potential pathway of PFAS to the environment.

Engineering Trifluoromethyl Groups in Porous Coordination Polymers to Enhance Stability and Regulate Pore Window for Hexane Isomers Separation.

Effective separation of hexane (C6) isomers is critical for a variety of industrial applications but conventional distillation methods are energy-intensive. Adsorptive separations based on porous coordination polymers (PCPs) offer a promising alternative due to their exceptional porosity and tunable properties. However, there is still an urgent need to develop PCPs with high stability and separation performance. This study investigates how substituting a methyl (-CH3) group with a trifluoromethyl (-CF3) group can regulate pores and hydrophobicity in PCPs. This precise adjustment aims to enhance stability and improve the kinetic separation performance of hydrophobic C6 isomers by considering the size and hydrophobicity of the trifluoromethyl group. Two isostructural PCPs with pcu topology, PCP-CH3 and PCP-CF3, were synthesized to vary pore diameters and hydrophobicity based on the presence of -CH3 or -CF3 groups. PCP-CF3 showed greater stability in water compared to PCP-CH3. While PCP-CH3 had high adsorption capacities, it lacked selectivity, whereas PCP-CF3 demonstrated improved selectivity, particularly in excluding dibranched isomers. Dynamic column separation experiments revealed that PCP-CF3 could selectively adsorb linear and monobranched isomers over dibranched isomers at room temperature. These findings highlight the potential of fluorine-modified PCPs for efficient isomer separation and underscore the importance of stability improvement strategies.

Linear Non-benzenoid Isomer of Acene Fusing Chrysene with Azulene Units.

Non-benzenoid polycyclic aromatic hydrocarbons (PAHs) have received considerable attention owing to their distinctive optical and electrical properties. Nevertheless, the synthesis and optoelectronic application of non-benzenoid PAHs remain challenging. Herein, we present a facile synthesis of linear non-benzenoid PAH with an armchair edge, diACh, by fusing chrysene with two azulene units. We systematically investigated the optical and electrical properties, which were also compared to its isomers, including benzenoid and non-benzenoid zigzag edge isomers. diACh exhibits global aromaticity, good planarity, and suitable highest occupied molecular orbital/lowest unoccupied molecular orbital energy levels. The protonation of diACh in solution successively forms a stable tropylium cation and dication. Moreover, the neutral, cationic, and dicationic states of diACh can be transformed with remarkable reversibility during the protonation-deprotonation process, as confirmed by ultraviolet-visible absorptions, fluorescence spectra, 1H nuclear magnetic resonance, and theoretical calculations. Additionally, we fabricate p-type organic field-effect transistor (OFET) devices based on diACh with hole mobility up to 0.026 cm2 V-1 s-1, and we further develop OFET-based acid vapor sensors with good sensitivity, recyclability, and selectivity. These findings underscore the unique properties of linear non-benzenoid PAHs with an armchair edge engendered by the fusion of azulene with the acene backbone, showcasing prospective applications in organic optoelectronics.

Efficient separation of linear and mono-branched hexane isomers using large-area silicalite-1 membranes

Membrane-based hydrocarbon isomer separation is a promising and energy-saving alternative to distillation. For the first time, tubular silicalite-1 membranes with large areas of 180 cm2 were employed in this study to separate linear and mono-branched hexane isomers. The membrane had a thickness of around 8 μm and showed highly (h0h) orientation. In binary and ternary mixtures of n-hexane (n-C6), 2-methylpentane (2MP), and 3-methylpentane (3MP), the effects of temperature and partial pressure on the separation performance of silicalite-1 membrane were examined. Moreover, the long-term stability of the membrane in binary and ternary mixture separation was also investigated. The large-area membrane showed a n-C6 permeance of 2.4 × 10-8 mol/(m2 s Pa) and n-C6/2MP and n-C6/3MP separation factors of 36 and 74 in the ternary n-C6/2MP/3MP (2.8 kPa/2.9 kPa/2.8 kPa) mixture with N2 as the balanced gas at 100 kPa absolute and 303 K, respectively. The scaling-up membranes demonstrated good and stable separation performance during the long-term test, highlighting the effectiveness and potential application of using large-area silicalite-1 membranes for the separation of hexane isomer mixtures.

Ring and Linear Structures of CdTe Clusters

We report the results of an ab initio study of the linear and ring structures of cadmium telluride clusters [CdTe]n (CdnTen) n ≤ 10 within the generalized gradient approximation (GGA) and Purdue–Burke–Ernzerhof (PBE) parameterization with Hubbard corrections (GGA+U). We optimized the linear and ring isomers for each size to obtain the lowest-energy structures and to understand their growth behavior. The cases of n < 8 for ring-type structures and n = 6 and 9 for linear-type structures were found to be the most favorable. All observed clusters with a linear structure were found to have a small highest-occupied–lowest-unoccupied molecular orbital (HOMO–LUMO) gap. The CdTe clusters with ring structure showed larger values of the HOMO–LUMO gaps than the band gap value for the bulk crystal. Structural and electronic properties like bond length, the HOMO–LUMO gap, binding energy, and electronegativity were analyzed.

Dehydration-Induced Cluster Consolidation in a Metal-Organic Framework for Sieving Hexane Isomers.

Metal-organic frameworks (MOFs) that exhibit dynamic phase-transition behavior under external stimuli could have great potential in adsorptive separations. Here we report on a zinc-based microporous MOF (JNU-80) and its reversible transformation between two crystalline phases: large pore (JNU-80-LP) and narrow pore (JNU-80-NP). Specifically, JNU-80-LP can undergo a dehydration-induced cluster consolidation under heat treatment, resulting in JNU-80-NP with a reduced channel that allows exclusion of di-branched hexane isomers while high adsorption of linear and mono-branched hexane isomers. We further demonstrate the fabrication of MOF-polymer composite (JNU-80-NP-block) and its application in the purification of di-branched isomers from liquid-phase hexane mixtures (98 % di-branched) at room temperature, affording the di-branched hexane isomers with 99.5 % purity and close to 90 % recovery rate over ten cycles. This work illustrates an interesting dehydration-induced cluster consolidation in MOF structure and the ensuing channel shrinkage for sieving di-branched hexane isomers, which may have important implications for the development of MOFs with dynamic behavior and their potential applications in non-thermal driven separation technologies.

Remove legacy perfluoroalkyl acids and emerging per- and polyfluoroalkyl ether acids by single-use and regenerable anion exchange resins: Rapid small-scale column tests and model fits

Rapid small-scale column tests (RSSCT) are used to study the removal of per- and polyfluoroalkyl substances (PFAS) for drinking water treatment by ion exchange. Breakthroughs of 15 emerging per- and perfluoroalkyl ether acids and six legacy perfluoroalkyl acid analogs are studied using a single-use PFAS-selective anion exchange resin (AER1) and a regenerable, generic anion exchange resin (AER2). The Bohart-Adams model was used to describe and predict breakthrough, with the modeled results reasonably aligned with RSSCT results in most cases, enabling shorter RSSCT duration for future applications. AER1 exhibited high uptake capacity with no breakthrough for 11 of the 21 tested PFAS during the 144,175 BV continuous operation, allowing compliance with the new National Primary Drinking Water Regulation in many application scenarios. AER2 exhibited much faster breakthroughs for most PFAS and is not a promising option for drinking water treatment. However, the summed PFAS capacity via model fit and total PFAS adsorbed via measurement were only <0.01 % of both resin capacities at full breakthrough, suggesting PFAS could only occupy a tiny portion of the ion exchange sites even for the PFAS-selective AER1. Ether group insertion in the PFAS group leads to later breakthrough, and linear isomers were better captured by the resins than the branched isomers. Overall, PFAS uptake capacity increases and kinetics decrease when the PFAS molecular volume increases. Regeneration using 10 % NaCl solutions partially released PFAS from AER2 but not from AER1, with more short-chain PFAS released than long-chain ones. Ether group insertion decreased the PFAS recoveries during the regeneration of AER2. The regenerated resins showed much faster breakthroughs than the pristine resins, making them unfavorable for drinking water treatment applications. Adsorption displacement of short-chain PFAS by long-chain PFAS was observed in pristine AER1, and post-regeneration leaching occurred for both resins, both phenomena making the resins a possible PFAS source in long-term use.

Influence of Acid‐Base Characteristics of Different Structural‐Type Zeolites (FER, MFI, FAU, BEA) on Their Activity and Selectivity in Isobutanol Dehydration

AbstractThe different structural‐type zeolites (FER, MFI, FAU, BEA) are investigated as catalysts in (bio)isobutanol conversion into linear butenes. The zeolites’ structure and morphology are confirmed by XRD, N2 (77 K) ad(de)sorption, SEM, EDX, XPS, and 27Al, 29Si, 1H MAS NMR, 1H‐29Si CP MAS NMR. The nature and strength of acid‐base sites are determined by FTIR spectroscopy of adsorbed pyridine, potentiometric titration, and TPD of NH3/CO2/H2O with MS control. The acid‐base properties of the zeolites′ surfaces influence their catalytic properties in the target process. The higher selectivity towards linear butene isomers achieved over FER and MFI can be explained by the high strength and density of Brønsted acid sites (over 90 % of the total surface acidity). MFI might be regarded as a potential material for the creation of novel catalysts for isobutanol conversion into linear butenes at moderate temperatures (448–473 K) since it offers greater operating stability throughout the process.

In situ conversion of ZnO anchored on porous carbon foams to antiflexible ZIF-8-X (X = Co or NH2) for sieving linear and mono-branched hexane isomers

Efficient separation of linear hexane from their isomers is a vital petrochemical process to produce high-quality gasoline. Zeolitic imidazolate frameworks-8 (ZIF-8), one of the most famous metal-organic frameworks (MOFs), is a promising separation material due to its special pore size (3.4 Å), whereas the flexible framework limited its separation ability, showing unsatisfied trade-off between adsorption capacity and separation selectivity. Here, we propose a novel strategy of post metal-oxide modification (PMOM) to suppress ZIF-8 flexibility by in situ growth on rigid layer of porous carbon foam (PCF) based the intermediation of anchored ZnO nanoparticles directly obtained from the pyrolysis of sucrose and zinc nitrate mixture. Afterwards, synergistic flexible suppression technology (SFST) was adopted to design antiflexible PCF/ZIFs with mixed-metal and mixed-ligand, including bi-metal PCF/ZIF-8-Co and di-ligand PCF/ZIF-8-NH2. Therein, the tight interfaces generated with benzene-ring inhabited the swinging of linkers and hindered 3-MP entry into the pore channels, showing both remarkable nHex adsorption capacity (q = 2.26 mmol·g−1) and nHex/3-MP selectivity (Su = 9.42). Moreover, bi-component adsorption experiments confirm the practical separation performance and cycling stability, showing promising application in adsorptive separation processes.

Resonant electron capture by polycyclic aromatic hydrocarbon molecules: Effects of aza-substitution.

Resonant electron capture by aza and diaza derivatives of phenanthrene (7,8-benzoquinoline and 1,10-phenanthroline) and anthracene (acridine and phenazine) at incident free electron energies (Ee) in the range of 0-15eV was studied. All compounds except 7,8-benzoquinoline form long-lived molecular ions (M-) at thermal electron energies (Ee ∼ 0eV). Acridine and phenazine also form such ions at epithermal electron energies up to Ee = 1.5-2.5eV. The lifetimes (τa) of M- with respect to electron autodetachment are proportional to the extent of aza-substitution and increase on going from molecules with bent geometry of the fused rings (azaphenanthrenes) to linear isomers (azaanthracenes). These regularities are due to an increase in the adiabatic electron affinities (EAa) of the molecules. The EAa values of the molecules under study were comprehensively assessed based on a comparative analysis of the measured τa values using the Rice-Ramsperger-Kassel-Marcus theory, the electronic structure analysis using the molecular orbital approach, as well as the density functional calculations of the total energy differences between the molecules and anions. The only fragmentation channel of M- ions from the compounds studied is abstraction of hydrogen atoms. When studying [M-H]- ions, electron autodetachment processes were observed, the τa values were measured, and the appearance energies were determined. A comparative analysis of the gas-phase acidity of the molecules and the EAa values of the [M-H]· radicals revealed their proportionality to the EAa values of the parent molecules.

A Microporous Multi-Cage Metal-Organic Framework for an Effective One-Step Separation of Branched Alkanes Feeds.

The improvement of the Total Isomerization Process (TIP) for the production of high-quality gasoline with the ultimate goal of reaching a Research Octane Number (RON) higher than 92 requires the use of specific sorbents to separate pentane and hexane isomers into classes of linear, mono- and di-branched isomers. Herein we report the design of a new multi-cage microporous Fe(III)-MOF (referred to as MIP-214, MIP stands for materials of the Institute of Porous Materials of Paris) with a flu-e topology, incorporating an asymmetric heterofunctional ditopic ligand, 4-pyrazolecarboxylic acid, that exhibits an appropriate microporous structure for a thermodynamic-controlled separation of hydrocarbon isomers. This MOF produced via a direct, scalable, and mild synthesis route was proven to encompass a unique separation of C5/C6 isomers by classes of low RON over high RON alkanes with a sorption hierarchy: (n-hexane≫n-pentane≈2-methylpentane>3-methylpentane)low RON≫(2,3-dimethylbutane≈i-pentane≈2,2-dimethylbutane)high RON following the adsorption enthalpy sequence. We reveal for the first time that a single sorbent can efficiently separate such a complex mixture of high RON di-branched hexane and mono-branched pentane isomers from their low RON counterparts, which is a major achievement reported so far.

New Sustainable Pd(II)/Fe(III) Catalytic System Very Efficient in the Hydromethoxycarbonylation of 1-octene

In order to increase the catalytic activity of the Pd(II)-complexes in the alcoxycarbonylation of 1-olefins, the presence in solution of a strong Brönsted acid together with a phosphine ligand is usually required. From an industrial point of view, such two additives, however, influenced the sustainability of the process mainly caused by the related corrosion of the reaction vessel and the toxicity of the phosphine ligand.In this paper, the methoxycarbonylation of 1-octene has been efficiently carried out by using the [Pd(TsO)2(PPh3)2]/FeCl3 catalyst system. The catalyst is very active also without addition of PPh3, reaching the TON of ca. 1300 (mol/mol) in 2 hours by using the Fe(III)/Pd(II) = 400/1 (mol/mol) system. Such value is higher than the values obtained by using the traditional strong Brönsted acid TsOH or other Lewis acid such as AlCl3, in the presence of PPh3. The reaction takes place with the formation of two isomeric products of linear and branched structures with a yield towards the linear isomer of ca. 80%.

Energetic and Spectroscopic Properties of Astrophysically Relevant MgC4H Radicals Using High-Level Ab Initio Calculations.

Considering the importance of magnesium-bearing hydrocarbon molecules (MgCnH; n = 2, 4, and 6) in the carbon-rich circumstellar envelopes (e.g., IRC+10216), a total of 28 constitutional isomers of MgC4H have been theoretically investigated using density functional theory (DFT) and coupled-cluster methods. The zero-point vibrational energy corrected relative energies at the ROCCSD(T)/cc-pCVTZ level of theory reveal that the linear isomer, 1-magnesapent-2,4-diyn-1-yl (1, 2Σ+), is the global minimum geometry on the MgC4H potential energy surface. The latter has been detected both in the laboratory and in the evolved carbon star, IRC+10216. The calculated spectroscopic data for 1 match well with the experimental observations (error ∼ 0.78%) which validates our theoretical methodology. Plausible isomerization processes happening among different isomers are examined using DFT and coupled-cluster methods. CASPT2 calculations have been performed for a few isomers exhibiting multireference characteristics. The second most stable isomer, 1-ethynyl-1λ3-magnesacycloprop-2-ene-2,3-diyl (2, 2A1, μ = 2.54 D), is 146 kJ mol-1 higher in energy than 1 and possibly the next promising candidate to be detected in the laboratory or in the interstellar medium in future.

Formations of C6H from reactions C3 + C3H2 and C3H + C3H and of C8H from reactions C4 + C4H2 and C4H + C4H.

We interrogated C6H and C8H produced separately from the reactions C3 + C3H2/C3H + C3H/C3H2 + C3 → C6H + H and C4 + C4H2/C4H + C4H/C4H2 + C4 → C8H + H using product translational and photoionization spectroscopy. Individual contributions of the three reactions to the product C6H or C8H were evaluated with reactant concentrations. Translational-energy distributions, angular distributions, and photoionization efficiency curves of products C6H and C8H were unraveled. The product C6H (C8H) was recognized as the most stable linear isomer by comparing its photoionization efficiency curve with that of l-C6H (l-C8H), produced exclusively from the reaction C2 + C4H2 → l-C6H + H (C2 + C6H2 → l-C8H + H). The ionization threshold after deconvolution was determined to be 9.3 ± 0.1eV for l-C6H and 8.9 ± 0.1eV for l-C8H, which is in good agreement with theoretical values. Quantum-chemical calculations indicate that the reactions of C3 + C3H2 and C3H + C3H (C4 + C4H2 and C4H + C4H) incur no energy barriers that lie above the corresponding reactant and the most stable product l-C6H (l-C8H) with H on the lower-lying potential-energy surfaces. The theoretical calculation is in accord with the experimental observation. This work implies that the reactions of C3 + C3H2/C3H + C3H and C4 + C4H2/C4H + C4H need to be taken into account for the formation of interstellar C6H and C8H, respectively.

Study on Formation of Interstellar C7H from Reactions C4 + C3H2 and C4H + C3H.

We interrogated C7H produced from reactions C4 + C3H2/C4H + C3H → C7H + H using both translational and photoionization spectroscopy. Reactants C3H, C3H2, C4, and C4H were synthesized in two crossed beams of 1% C2H2/He ignited by pulsed high-voltage discharge. The individual contributions of reactions C4 + C3H2 and C4H + C3H to product C7H were evaluated as 17:83 from reactant concentrations in both molecular beams. The translational energy distribution, the angular distribution, and the photoionization efficiency curve of product C7H were unraveled. C7H was identified as the most stable linear isomer by its photoionization efficiency curve that features two ionization thresholds corresponding to separate transitions to singlet and triplet states of l-C7H+. The quantum-chemical calculations indicate that the associations of C4 with C3H2 and C4H with C3H incur no entrance barriers, and the most favorable exit channel leads to product l-C7H + H. It is the first time demonstrating that C7H is producible from reactions 1,3C4 + 1C3H2 and 2C4H + 2C3H on the lowest-lying singlet and triplet potential energy surfaces of 1,3C7H2. This work implies that the reactions of C4 + C3H2 and C4H + C3H might have contributions to interstellar C7H to some extent as compared with the C + C6H2 reaction commonly adopted in an astrochemical model.

A one-pot CRISPR-RCA strategy for ultrasensitive and specific detection of circRNA.

Accurate and precise detection of circular RNA (circRNA) is imperative for its clinical use. However, the inherent challenges in circRNA detection, arising from its low abundance and potential interference from linear isomers, necessitate innovative solutions. In this study, we introduce, for the first time, the application of the CRISPR/Cas12a system to establish a one-pot, rapid (30 minutes to 2 hours), specific and ultrasensitive circRNA detection strategy, termed RETA-CRISPR (reverse transcription-rolling circle amplification (RT-RCA) with the CRISPR/Cas12a). This method comprises two steps: (1) the RT-RCA process of circRNA amplification, generating repeat units containing the back-splicing junction (BSJ) sequences; and (2) leveraging the protospacer adjacent motif (PAM)-independent Cas12a/crRNA complex to precisely recognize target sequences with BSJ, thereby initiating the collateral cleavage activity of Cas12a to generate a robust fluorescence signal. Remarkably, this approach exhibits the capability to detect circRNAs at a concentration as low as 300 aM. The sensor has been successfully employed for accurate detection of a potential hepatocellular carcinoma biomarker hsa_circ_0001445 (circRNA1445) in various cell lines. In conclusion, RETA-CRISPR seamlessly integrates the advantages of exponential amplification reaction and the robust collateral cleavage activity of Cas12a, positioning it as a compelling tool for practical CRISPR-based diagnostics.

Linear isomer but not branched isomers of perfluorooctane sulfonate in plasma is associated with eicosapentaenoic acid, a seafood consumption biomarker.

Per- and polyfluoroalkyl substances (PFAS) are global contaminants. Seafood consumption is a possible PFAS exposure route to humans while the isomer specific analysis has not been conducted. Perfluorooctane sulfonate (PFOS), perfluoroheptane sulfonate (PFHpS) and perfluorohexane sulfonate (PFHxS) were investigated in residents of Kyoto, Japan (n = 51). The relationship between plasma PFAS and seafood consumption biomarker, the ratio of eicosapentaenoic acid to arachidonic acid (EPA/AA) was examined by multiple regression analysis. Linear PFOS concentrations showed a significant positive correlation with the EPA/AA ratio in plasma samples (β = 6.80, p = 0.0014). Linear PFHpS was marginally associated with EPA/AA ratio (β = 0.178, p = 0.0874). Branched PFOS isomers and PFHxS had no associations with EPA/AA ratios. Seafood intake may be a significant exposure pathway for PFAS, such as PFOS but the isomers differ.

Theoretical study on the H-atom abstraction reactions of pentanol + HȮ2, part I: five branched pentanol isomers.

The chemical kinetic studies of hydrogen atom (H-atom) abstraction reactions by hydroperoxyl (HȮ2) radicals from five branched pentanol isomers, including 3-methyl-1-butanol, 2-methyl-1-butanol, 1,1-dimethyl-1-propanol, 1,2-dimethyl-1-propanol, and 2,2-dimethyl-1-propanol were investigated systematically through high-level ab initio calculations. Geometry optimization, frequency analysis, and zero-point energy (ZPE) corrections were performed for six reactants, twenty-three transition states (TSs), and twenty-four products at the M06-2X/6-311++G(d,p) level of theory. The intrinsic reaction coordinate calculation was performed at the same level of theory to confirm the transition state connection. The one-dimensional hindered rotor treatment for low-frequency torsional modes was also treated at the M06-2X/6-311++G(d,p) level of theory. The QCISD(T)/CBS level of theory was used to calculate the single-point energies for the species whose T1 diagnostic value was lower than 0.035. At the same time, the CASPT2/CBS level of theory was used to calculate the single-point energies for the channel in which the T1 diagnostic value of transition states was greater than 0.035. Rate constants for the H-atom abstraction reactions from the five branched pentanol isomers by HȮ2 radicals were calculated by using conventional transition state theory with asymmetric Eckart tunneling corrections in the temperature range of 500-2000 K. Rate constants and branching ratios for the title reactions and the rate rules for ten different H-atom abstraction types were investigated. Temperature-dependent thermochemistry properties for all reactants and products were calculated by the composite methods of G3/G4/CBS-QB3/CBS-APNO, which were in good agreement with the data available in the literature. Rate constants for the H-atom abstraction reactions by HȮ2 radical from branched pentanol isomers were investigated in this work as part I, and those for linear pentanol isomers will be analyzed in part II. All the calculated kinetics and thermochemistry data can be utilized in the model development for branched pentanol isomers oxidation.

Theoretical investigation on isomerization and decomposition reactions of pentanol radicals-part II: linear pentanol isomers.

High-level ab initio calculations are conducted for studying the kinetics of three linear pentanol radicals generated through H-atom abstraction reactions. The species involved are optimized using the M06-2X/6-311++G(d,p) level of theory, while a relaxed scan at the M06-2X/6-31g level of theory with 10° increments is used for the hindrance potential for low-frequency torsional modes. Single-point energies for all stationary points are obtained through the QCISD(T) and MP2 methods in combination with cc-pVDZ, cc-pVTZ, and cc-pVQZ basis sets, which can be extrapolated to the complete basis set (CBS) limit. The rate constants and branching ratios for isomerization and decomposition reactions are computed over a temperature range of 250-2000 K and a pressure range of 0.01-100 atm. Isomerization reactions are dominant at low temperatures, while decomposition reactions are more dominant at high temperatures. The branching ratio of the isomerization reaction exhibits a slight decrease with increasing pressure, while the trend for decomposition reactions depends on the type of the breaking bond. Based on the calculations for five branched pentanol radicals in part I, kinetics of linear and branched pentanol radicals are compared in this work and the results reveal that, for the same kind of β-scission reaction at similar positions of linear and branched pentanol radicals, the rate constants of branched ones are faster than those of linear ones at low temperatures. The hydroxyl group adjacent to the breaking bond can increase the β-scission reaction rate constants, while the effect can be ignored when the hydroxyl group is not adjacent to the breaking bond. Moreover, compared to when the hydroxyl group is located in the middle of the carbon chain, its positioning at the chain's end yields a more noticeable impact on the products and rate constants of C-O bond and O-H bond β-scission reactions. Besides, when incorporating calculated rate constants into the CRECK model, the updated mechanism shows a better performance for ignition delay times of 1-pentanol in the NTC range but exhibits lower reactivity at higher temperatures. The simulation of speciation profiles also shows better agreement with the experimental data obtained using a flow reactor.

Spatial distribution, isomer signature and air-soil exchange of legacy and emerging poly- and perfluoroalkyl substances

Widespread occurrences of various poly- and perfluoroalkyl substances (PFAS) in terrestrial environment calls for the growing interest in their transport behaviors. However, limited studies detected PFAS with structural diversity in tree barks, which reflect the long-term contamination in atmosphere and play a vital role in air-soil exchange behaviors. In this study, 26 PFAS congeners and typical branched isomers were investigated in surface soils and tree barks at 28 sites along the Taihu Lake, Taipu River, and Huangpu River. Concentrations of total PFAS in soils and tree barks were 0.991–29.4 and 7.99–188 ng/g dw, with PFPeA and PFDoA were the largest contributors in the two matrices. The highest PFAS levels were found in the Taihu Lake watershed, where textile manufacturing and metal plating activities highly prosper. With regard to the congener and isomer signatures, short-chain homologs dominated in soils (65.5%), whereas long-chain PFAS showed a major proportion in barks (41.9%). The composition of linear isomers of PFOS, PFOA and PFHxS implied that precursor degradation might be an important source of PFAS in addition to the 3M electrochemical fluorination (ECF). Additionally, the distance from the emission source, total organic carbon (TOC), logKOA and logKOW were considered potential influencing factors in PFAS distributions. Based on the multi-media fugacity model, about 71% of the fugacity fraction (ffs) values of the PFAS were below 0.3, indicating the dominant deposition from the atmosphere to the soil. The average fluxes of air-soil exchange for PFAS were −0.700 ± 11.0 ng/(m2·h). Notably, the estimated daily exposure to PFAS ranged from 9.57 × 10−2 to 8.59 × 10−1 ng/kg·bw/day for children and 3.31 × 10−2 to 3.09 × 10−1 ng/kg·bw/day for adults, suggesting low risks from outdoor inhalation and dermal uptake. Overall, results from distribution with structural diversity, air-soil exchange and preliminary risk assessment. This study provided in-depth insight of PFAS in multi-medium environment and bridged gaps between field data and policy-making for pollution control.