Limited Space Research Articles

Awareness and perceived barriers to the adoption of best management practices for the transportation of lactating cull dairy cows of dairy producers in Ontario

The objectives of this study were to understand dairy farmers' awareness and perceived barriers to the implementation of best management practices (BMP) for the transportation of lactating culled cows being moved to auction or abattoir. An invitation to participate was emailed to all dairy farms in Ontario, Canada. Responses to this invitation were used to recruit additional participants through criterion purposive snowball sampling. In total, 28 dairy producers participated in one of 5 semi-structured focus groups. All focus groups were audio recorded, transcribed verbatim, and analyzed with applied thematic analysis. Four themes were identified including 1) transfer of responsibility, 2) interpersonal relationships, 3) juggling priorities, and 4) complexities of long-term planning. While individual participant knowledge varied, participants described misconceptions that other producers held surrounding transport duration and distances, or the number of possible sales points for lactating culled cows. Participants did not agree whether the producer's responsibility ended once the cow left their property or if shared responsibility remained among all stakeholders from the farm to the final destination. Participants discussed the importance of existing trusted relationships with local cattle transporters and veterinarians to ensure information on best practices are shared. Participants also discussed how business pressures (e.g., production demands, space limitations) often challenge their ability to dry off lactating cows before transport; however, participants mentioned the degree of milk production may influence the destination of their animal (e.g., direct to slaughter for animals with high milk production). Some participants described a dynamic balance between business pressures and the potential for declining welfare of the animals under consideration to be culled during lactation. Participants posited that producers who did not prioritize proactive herd management and producers nearing retirement had limited long-term planning for culling individual cows, which might lead to transport of vulnerable or unfit animals. Finally, the lack of access to transportation direct to local slaughter was identified as an important barrier to adherence with the BMP for cull cows. In summary, many participants did not have an accurate understanding of what happens to cull cows after departing the farm and were unsure if they maintained a level of responsibility for an animal after being transported from their farm. Given the priority placed by participants on trusted interpersonal relationships, greater availability of peer-to-peer training of farmers and professional accreditation of animal transporters in addition to structural changes to increase local slaughter capacity may increase implementation of BMP and enhance lactating cull cow welfare.

Evaluating User Engagement and Preference in Virtual Reality and Augmented Virtuality for Interactive Storytelling

Abstract Technologies like virtual reality (VR) and augmented virtuality (AV) based on head-mounted display (HMD) have made immersive interactive narrative experience possible. To investigate the differences between HMD VR and HMD AV for interactive storytelling, an app entitled the Extended Journey has been designed, developed and deployed on both VR headsets and optical see-through (OST) mixed reality (MR) headsets. Subsequently, a within-subjects design experiment with sixty participants was conducted to measure different factors of user experience in HMD VR and HMD AV conditions. Additionally, a between-subjects design experiment with 62 participants was conducted to evaluate narrative immersion and presence. Quantitative results from the experiments reveal that HMD VR narrative had statistically significantly better narrative immersion, presence, enjoyment and perceived affinity of computer-generated (CG) characters compared with HMD AV narrative in the context of galleries and museums. Based on Sundar's Modality-Agency-Interactivity-Navigability (MAIN) model, we proposed and validated that sense of being-there and interaction mediated the relationship between immersive media modality and narrative immersion as well as empathy. Qualitative data and behavioral tests showed that young people have a higher preference for HMD VR over HMD AV, but for specific use scenarios, there is still a certain possibility of choosing HMD AV due to security and space limitations. These findings have theoretical implications for the psychology of VR and AV, and practical applications for HMD-based immersive narrative in general.

Investigation of torsion in asymmetric mid-rise structures on the pile-raft system considering soil-structure interaction

The adverse conditions of the soil such as soft soil can have seismic consequences that may either amplify seismic response or render the structure vulnerable. On one hand, the design and construction of asymmetric structures have become prevalent due to aesthetic considerations and structural space limitations. Studies indicate that structures with geometric irregularities are susceptible to seismic forces, leading to non-uniform distribution of floor drifts, excessive torsional behavior, and more, depending on the degree of irregularity. In this research, the main goal was to investigate the effect of soil and structure interaction on the torsion of asymmetric Mid-Rise Structures. To achieve this goal two asymmetric Steel moment frame system 15-story structures aim to address the effect of interaction between soil and structure on the seismic performance, one with a rigid base and the other with a flexible base, one with a rigid base and the other with a flexible base. To mitigate the settlement of soil-associated structures, a pile-raft system is employed, considering the softness of the soil. Additionally, to study the torsional behavior of these structures, their planes are asymmetrically designed in L-shape and C-shape configurations, subjected to four ground motion excitations in both far and near-field scenarios. Three-dimensional finite element numerical simulations are performed using Abaqus software. Various configurations of the pile-raft system for the asymmetric C-shape structure are examined to assess the effects of pile diameter and length on the torsional irregularity coefficient. The results show that the soil-structure interaction increases the maximum floor rotation angle, placing these structures in critical conditions concerning torsional irregularity under near-field and far-field seismic excitations.

Online Flow Measurement of Liquid Metal Solutions Based on Impact Force Sequences: Modeling Analysis, Simulation, and Validation of Experimental Results.

Aiming at the existing high-temperature liquid metal flow online accurate measurement by the metal melt characteristics, installation space, and high-temperature environment adaptability limitations, this paper innovatively puts forward a soft measurement method based on the impact force generated in the fluid flow process as an observational variable series. Fluid mechanics theory and simulation software are used to analyze and verify the feasibility of the impact force as an observable variable to measure the flow rate, followed by the construction of the CNN-LSTM-CNN-Double (CLCD) flow measurement model of impact force and flow rate based on the parameters of the learning rate and the number of training times, and finally the construction of a test platform for the flow measurement, and the validity of the method is verified through actual operation.

Master equation modeling of water dissociation in small ionic water clusters: Ag+(H2O) n , n = 4-6.

We model temperature-dependent blackbody infrared radiative dissociation (BIRD) rate coefficients of Ag+(H2O) n , n = 4-6, a system with loosely bound water molecules. We employ a master equation modeling (MEM) approach with consideration of absorption and emission of blackbody radiation, comparing single and multiple-well descriptions. The unimolecular dissociation rate coefficients are obtained using the Rice-Ramsperger-Kassel-Marcus (RRKM) theory, employing two approaches to model the sum of states in the transition state, the rigid activated complex (RAC) and the phase space limit (PSL) approach. A genetic algorithm is used to find structures of low-lying isomers for the kinetic modeling. We show that the multiple-well MEM approach with PSL RRKM in the All Wells and Transition States Are Relevant (AWATAR) variant provides a reliable description of Ag+(H2O) n BIRD, in agreement with previously published experimental data. Higher-lying isomers contribute significantly to the overall dissociation rate coefficient, underlying the importance of the multiple-well ansatz in which all isomers are treated on the same footing.

Photon propagator for inflation in the general covariant gauge

Photon propagator for power-law inflation is considered in the general covariant gauges within the canonical quantization formalism. Photon mode functions in covariant gauges are considerably more complicated than their scalar counterparts, except for the special choice of the gauge-fixing parameter we call the simple covariant gauge. We explicitly construct the position space photon propagator in the simple covariant gauge, and find the result considerably more complicated than its scalar counterpart. This is because of the need for explicitly inverting the Laplace operator acting on the scalar propagator, which results in Appell’s fourth function. Our propagator correctly reproduces the de Sitter and flat space limits. We use this propagator to compute two simple observables: the off-coincident field strength-field strength correlator and the energy-momentum tensor, both of which yield consistent results. As a spinoff of our computation we also give the exact expression for the Coulomb gauge propagator in power-law inflation in arbitrary dimensions.

Feasibility Study of Aquawall - An Alternative for Conventional Rain Water Harvesting System

Rainwater harvesting has been an age-old activity, practiced by many cultures in areas of poverty and wealth, but unfortunately our urban communities discard using it due to ignorance and lack of education. The challenge is to change the attitude of the state agencies responsible for environmental policy to make population being part of water saving, reduction of vulnerability and adaptation to climate change with rainwater harvesting. In our urban space limitations make it necessary to propose a system of “vertical water tank” that fulfills this function. The Aquawall project is based on the appropriate technology and the circular economy, made by self and is designed in a modular way, taking up minimal space, made of nine towers of six three-liter bottles each, connected to a PVC base

Identifying, restoring, and remastering of the Sarinah relief sculpture in Jakarta of Indonesia: the limitations of time, space, and technology

The Sarinah historic building transformation project in Jakarta, Indonesia (2020–2022) is an adaptive reuse of the original building formed through a scientific conservation process. Therefore, this research identified, restored, and remastered the Sarinah relief sculpture of alto-relievo (high relief) and mezzo-relievo (medium relief). The invasive demolition method was used to form an atrium space to show the reappearance of the artwork by dismantling two layers of building floors above where the relief was found. The non-invasive method was implemented (a) by identifying damaged mapping artifacts, (b) by restoring, cleaning, and repairing the broken artifacts, and (c) by remastering the 3D model. All activities were supported by digital applications such as the Cartesian diagram coordinates, AutoCAD, Adobe Photoshop, Zbrush software, and close-range photogrammetry. The case study's contribution to heritage science showed the process used to restore alto-relievo and mezzo-relief within time, space, and technology limitations.

Characterising the Haar measure on the [formula omitted]-adic rotation groups via inverse limits of measure spaces

We determine the Haar measure on the compact p-adic special orthogonal groups of rotations SO(d)p in dimension d=2,3, by exploiting the machinery of inverse limits of measure spaces, for every prime p>2. We characterise the groups SO(d)p as inverse limits of finite groups, of which we provide parametrisations and orders, together with an equivalent description through a multivariable Hensel lifting. Supplying these finite groups with their normalised counting measures, we get an inverse family of Haar measure spaces for each SO(d)p. Finally, we constructively prove the existence of the so-called inverse limit measure of these inverse families, which is explicitly computable, and prove that it gives the Haar measure on SO(d)p. Our results pave the way towards the study of the irreducible projective unitary representations of the p-adic rotation groups, with potential applications to the recently proposed p-adic quantum information theory.

Conjugated polymer-encapsulation-manipulated aggregation-induced electrochemiluminescence of tetraphenylethylene for sensitive malathion analysis

Tetraphenylethylene (TPE) and its derivatives with tunable structure and excellent photoelectric performance have aroused great concern in the field of electrochemiluminescence (ECL), but improving their ECL efficiency remains an enormous challenge in ECL bioanalysis. Herein, an encapsulation-manipulated aggregation-induced ECL (EM-AIECL) strategy was explored to effectively boost the ECL efficiency of TPE. Large π-conjugated polymer poly[2,5-dioctyl-1,4-phenylene] (PDP) was creatively developed as encapsulation matrix to envelop TPE molecules via hydrophobic interactions. The resulting complex TPE@PDP nanoparticles (NPs) not only restricted the molecule motion of TPE due to space limitation, but also inhibited the aggregation-caused quenching effect caused by TPE crystals featuring dense aggregation structure. Furthermore, the robust electronic coupling between PDP and TPE aggregates enabled superior charge transport within TPE@PDP NPs, thus yielding strong AIECL. As compared to TPE crystals, TPE@PDP NPs showcased 3.87-fold enhancement of ECL intensity. Impressively, TPE@PDP NPs coupled a three-dimensional DNA walker-assisted multiple rolling circle amplification strategy to construct an ECL sensing platform for malathion analysis, and a wide linear range of 5.0 fM ∼ 0.5 μM and low limit of detection of 0.9 fM were obtained. EM-AIECL strategy provides a new idea for designing organic AIECL luminophors, and opens an avenue for detecting pesticides specifically and sensitively.

Collision between supply vessels and offshore installations case cargo handling and personal transferring operation

Abstract This paper presents a systematic methodology aiming at investigating human-error induced collisions between attendant vessels and offshore installations, with focus on three key risk categories: Cargo handling and personnel transferring (CH), loss of station keeping (SK) and ship handling and maneuvers (SH). Because of space limitation, the methodology will be applied here to the first category (CH) only. The Failure Mode, Effects and Criticality Analysis (FMECA) method was used to identify the hazards. Moreover, the Interpretive Structural Modeling (ISM) of Multi Criteria Decision Making (MCDM) was used for the same purpose and results of both methods were favorably compared. Moreover the Fault Tree Analysis (FTA) was used to evaluate the root causes of accidents down to the Underling Factors (UFs) benefiting from the revised guidelines for the IMO Formal Safety Assessment (FSA).

Developing Integrative Communicative Skills in the English Language through Video Project

One of the biggest challenges in the organization of the educational process in English is overcoming the limitations of time and space to develop communicative skills in the target language. This paper introduces vlogging as an instructional strategy and measures its effectiveness through the opinion of third and fourth-year students who participated first in a directed vlogging task and then in a focus interview. The interviewed students were a total of 60 from B1 – B2 level of English from the 3rd and 4th year of the NUPCHE undergraduate program at Plovdiv University “Paisi Hilendarski”. The assignment was accompanied by an analytical type of rubric that clearly marked the assessment criteria by levels of performance. The results of the interview revealed the advantages of vlogging as an additional opportunity to develop integrated communicative skills in a foreign language outside the classroom. Most of the participants perceived vlogging as a positive experience with benefits mainly in the direction of productive skills and developing creativity and confidence in the language being studied.

조직신학적 관점에서 보는 부활 - 개신교 현대 조직신학자 바르트, 판넨베르크, 몰트만을 중심으로

Today people are very interested in death. However, this interest is an expression of concerns about what kind of life to live now. Also, this interest is an expression of the desire for life after death. In Christian theology, discussions about death or life after death are related to the theological locus of resurrection. This paper focuses on representative systematic theologians who have discussed the resurrection of Jesus Christ: Karl Barth(1886-1968), Wolfhart Pannenberg(1928-2014), and Juergen Moltmann(1926-present). It attempts to take a closer look at how each of them deal with resurrection within each own theological system. Barth, Pannenberg, and Moltmann all acknowledge the possibility of the resurrection of Jesus Christ. They accept both the empty tomb event and the appearance event of the resurrected Jesus Christ as recorded in the Bible and assert the possibility of resurrection. For all of them, the resurrection of Jesus Christ is not fiction, a lie, imagination, or fantasy at all. However, the perspectives from which they approach the resurrection of Jesus Christ are different, and those perspectives are closely related to each own respective theological methodology. Due to differences in theological methodology, the degree to which each person understands the reality, historicity, and factuality of the resurrection of Jesus Christ appears to be different. There are many other detailed topics related to resurrection, but this paper focuses on the possibility of the resurrection of Jesus Christ. Although they discussed more about the meaning of the resurrection of Jesus Christ, it is not discussed in this paper due to space limitations. Lastly, this paper looks at some implications of the resurrection of Jesus Christ and briefly address what a life to hope for resurrection is like.

Constructing novel GO microcomposite membranes with β-CD based microporous nanosheets for efficient dye/salt separation

Graphene oxide (GO) membrane is considered as one of the preferred choice for textile wastewater treatment thanks to its unique 2D interlayer channel features. However, GO laminar stacking is inclined to water-induced structure instability, and the narrow interlayer spacing limit mass transport efficiency, hampering its effectiveness in water treatment applications. Herein, a layer-by-layer stacked microcomposite membrane based on GO and highly microporous β-cyclodextrin based nanosheets (β-CDNS) served as intercalator was developed. The distinctive layered structure was further stabilized by covalent cross-linking with glutaraldehyde (GA). The microporous β-CDNS offered additional nanochannels that facilitated the rapid penetration of water molecules, while the abundant -OH groups provided sites for chemical cross-linking, enhancing membrane stability. The optimal GO/β-CDNS1 membrane exhibited a superior water permeance of up to 83.5 LMH/bar, with >99 % rejection for dyes such as Congo red (CR), methyl blue (MB), and chrome black T (CBT), 95.5 % for acid fuchsin (AF). Meanwhile, the GO/β-CDNS1 membrane demonstrated ultra-low (<5 %) retention for inorganic salts (MgSO4, MgCl2 and NaCl), with a separation factor as high as 194 for MB/NaCl mixtures. Therefore, employing functional interlayer nano-additives to well regulate the GO interlayer structure offers a promising guideline for developing high-performance GO-based membranes.

Algal biomass based bio-refineries: Concurrent pre-treatment strategies and perspectives for sustainable feedstock

The quest for viable and scalable biofuel sources has been at the forefront of scientific innovation for the past three decades. Due to its rich chemical constituents, microalgal biomass has emerged as a pivotal sustainable and scalable feedstock for biorefineries. This comprehensive review critically analyzes the different types of microalgae feedstock, concurrent extraction technologies, bio-pre-treatment procedures, and the key chemical and physical parameters influencing lipid formation and algal biofuel production. We propose a novel approach of photo-initiated culturing of algal biomass using photobioreactors (PBRs) to address the limitations of concurrent space and time-related constraints. The innovative photo bio-refinery strategy presented herein aims to enhance sustainability factors while minimizing emissions, catering to the needs of futuristic non-electric vehicles. A comparative quality analysis of microalgae-derived biofuel against conventional fossil fuels and other biofuels is conducted, considering chemical, environmental, economic, and social perspectives. Furthermore, we elucidate the efficacy of bio-pre-treatment strategies such as dehydration, hydrothermal liquefaction, pyrolysis, and gasification in optimizing biofuel production. The proposed photo biorefineries exhibit the potential to yield a diverse range of value-added products, including biodiesel, biogases, bio-fertilizers, bio-pesticides, bio-alcohols, dyes, proteins, carotenoids, and drug vitals. This review provides a comprehensive framework for the development of sustainable and efficient microalgae-based biorefineries, paving the way for a greener and more economically viable future in the biofuel industry.

Research on the Innovative Mode of Internet Hospitals to Implement Medical Services in the Context of Digital Transformation

In today s rapidly developing science and technology, digital transformation has become the trend of development in various industries, especially in the medical industry. The background and significance of this transformation are self-evident. Digital transformation is a powerful driving force for the transformation of the healthcare industry in the next decade. Based on modern technologies such as big data, cloud computing and artificial intelligence, Internet hospitals can break through the limitations of geographical space, improve the convenience and efficiency of medical services, and provide more convenient and personalized medical services for hundreds of millions of patients. Therefore, in-depth research and discussion on the innovative model of Internet hospitals is of great strategic significance for building the future intelligent medical system.

Prior-free 3D tracking of a fast-moving object at 6667 frames per second with single-pixel detectors.

Real-time tracking and 3D trajectory computation of fast-moving objects is a promising technology, especially in the field of autonomous driving. However, existing image-based tracking methods face significant challenges when it comes to real-time tracking, primarily due to the limitation of storage space and computational resources. Here, we propose a novel approach that enables real-time 3D tracking of a fast-moving object without any prior motion information and at a very low computational cost. To enable 3D coordinate synthesis with a space-efficient optical setup, geometric moment patterns are projected on two non-orthogonal planes with a spatial resolution of 125 μm. Our experiment demonstrates an impressive tracking speed of 6667 frames per second (FPS) with a 20 kHz digital micromirror device (DMD), which is more than 200 times faster than the widely adopted video-based tracking methods. To the best of our knowledge, this is the highest tracking speed record in the field of single-pixel 3D trajectory tracking. This method promotes the development of real-time tracking techniques with single-pixel imaging (SPI).

Offshore produced water treatment by a biofilm reactor on the seabed: The effect of temperature and matrix characteristics

In many industrial processes a large amount of water with high salinity is co-produced whose treatment poses considerable challenges to the available technologies. The produced water (PW) from offshore operations is currently being discharged to sea without treatment for dissolved pollutants due to space limitations. A biofilter on the seabed adjacent to a production platform would negate all size restrictions, thus reducing the environmental impact of oil and gas production offshore. The moving bed biofilm reactor (MBBR) was investigated for PW treatment from different oilfields in the North Sea at 10 °C and 40 °C, corresponding to the sea and PW temperature, respectively. The six PW samples in study were characterized by high salinity and chemical oxygen demand with ecotoxic effects on marine algae S. pseudocostatum (0.4%<EC50<2.7%). In continuous operation over a year, MBBR achieved a stable COD removal of 64 ± 5% at 10 °C and 68 ± 8% at 40 °C. Batch experiments revealed that most dissolved compounds were removed (up to 63%) within 3 h of treatment. High temperature (40 °C) was a key parameter to achieve a faster kinetics with degradation constant rate (k) up to eight-fold faster compared to 10 °C. Alongside contaminants removal, PW toxicity was also reduced (64–89%) during MBBR at both temperatures, hot and cold. The toxicity reduction was most likely related to the elimination of dissolved organic compounds, such as phenols, naphthalenes and BTEX. The biofilm was able to handle PW with high oil in water content from unstable production, as well as high salinity. Thus, MBBR seems to be a realistic solution to treat PW with complex and variable composition by removing harmful components towards the zero harmful discharge goal.

Research on the Teaching Mode of Innovation and Entrepreneurship Education Courses in Colleges and Universities based on Virtual Teaching Research Section

This paper takes four colleges and universities in Heilongjiang Province, the teaching mode of innovation and entrepreneurship courses as the object of study,and uses the virtual teaching and research office as a platform to explore how to effectively integrate the links between the employment guidance courses,innovation and entrepreneurship education courses and professional education courses to improve the quality of talent cultivation in the context of the new era. With the help of modern information technology, it breaks the limitations of space,time and geography,and realizes the efficient sharing and optimal allocation of teaching resources.

Quantum entanglement on black hole horizons in string theory and holography

We compute the exact one-loop partition function of ℤN orbifolds of Euclidean BTZ black hole with the aim to compute the entanglement entropy of the black hole horizon in string theory as a function of the mass and spin of the black hole and the AdS3 radius. We analyze the tachyonic contribution to the modular integrand for the partition function known for odd integers N > 1 and show that it admits an analytic continuation resulting in a finite answer for the modular integral in the physical region 0 < N ≤ 1. We discuss the flat space limit and the relevance of this computation for quantum gravity near black hole horizons and holography in relation to the thermal entropy.