Lignocellulosic Enzymes Research Articles

A copper-controlled RNA interference system for reversible silencing of target genes in Trichoderma reesei

BackgroundTrichoderma reesei is a primary lignocellulosic enzyme producer in industry. However, the mechanisms underlying cellulase synthesis as well as other physiological processes are insufficiently understood partly due to the sophisticated process for its genetic manipulation. Target gene knockdown by RNA interference (RNAi) is a powerful tool for genetic research and biotechnology in eukaryotes including filamentous fungi. Previously reported RNAi system in T. reesei was either uncontrollable or only applicable in certain nutrition state.ResultsIn the present study, we incorporated the copper-responsive tcu1 promoter into an RNAi-mediated silencing system to develop a controllable RNAi-mediated silencing system in T. reesei. As the proof-of-concept, a prototrophic pyr4 gene, highly expressed cel7a and xyr1 genes induced by Avicel and a fab1 gene, whose knockout has proved to be intractable, were successfully knocked down in the absence of copper when the respective RNAi fragment was expressed. Importantly, the phenotype of RNAi strains was shown to be reversed easily to mimic the complementation for excluding any unwanted effects resulted from the random integration of the hpRNA cassette by adding copper in the media. Thus, this controllable RNAi-mediated silencing system can be turned on and turned off only depending on the absence and presence of copper ions in the media, respectively, and not on the nutritional states.ConclusionsThe copper-controlled RNA interference system represents an effective tool for reversible silencing of target genes in T. reesei. This reported strategy to conditionally knock down or turn off genes will contribute to our understanding of T. reesei gene functions, especially those that are difficult to be knocked out due to various reasons. In addition, this simple and cost-effective method holds great potential for the application in synthetic biology and genetic engineering of T. reesei.

Heterologous production and characterization of a thermostable GH10 family endo-xylanase from Pycnoporus sanguineus BAFC 2126

Abstract Xylanases are key enzymes for agricultural biomass saccharification for the production of cellulosic ethanol. Success in enzymatic lignocellulose bioconversion is restricted by enzyme production costs, activity and stability under harsh reaction conditions, and their performance when interacting into cellulolytic cocktails. In this work, we present the heterologous expression and enzymatic characterization of a novel endo-β-1,4 xylanase of glycoside hydrolase family 10 (GH10ps) from the white-rot basidiomycete Pycnoporus sanguineus BAFC 2126. Recombinant expression of GH10ps in Pichia pastoris showed that it is a robust enzyme active at a wide range of pHs and temperatures, and with a half-life of 3 h at 70 °C and a stability higher than 48 h at 60 °C. Recombinant GH10ps was also capable of releasing xylooligosaccharides and xylose from pretreated agricultural waste biomass and also complemented commercial cellulases in lignocellulose bioconversion to fermentable sugars.

Molecular Characterization of Trichoderma asperellum and Lignocellulolytic Activity on Barley Straw Treated with Silver Nanoparticles

Silver nanoparticles (AgNPs) have been applied as an antifungal agent, which results in AgNPs contamination of agricultural waste that interferes with the lignocellulosic enzymes produced by fungi. Therefore, this study examined the production of carboxymethylcellulase (CMCase) and manganese-dependent lignin peroxidase (MnPase), using barley straw treated with AgNPs. Trichoderma asperellum growth was not inhibited at 25 ppm AgNPs, while negligible growth inhibition was observed at 50 ppm AgNPs, which was not observed with Aspergillus terreus and Curvularia lunata. T. asperellum was the highest producer of CMCase and MnPase using barley straw with or without 25 ppm AgNPs versus A. terreus or C. lunata. AgNPs addition to barley straw before T. asperellum inoculation played a role in repressing enzyme activities (CMCase 156.33 U/mL and MnPase 1.28 U/mL); however, addition of AgNPs (50 ppm) after 10 days of incubation showed the highest activity (CMCase 160.67 and 1.35 U/mL MnPase). Optimum temperature for enzyme production by T. asperellum using untreated and treated barley straw was 35 °C and 30 °C, respectively. Enzyme activities increased with increasing polyoxyethylenesorbitan monooleate surfactant concentrations up to 0.25 mL/g substrate without AgNPs, whereas the activity decreased with AgNPs (25 ppm). The exception to this observed trend was at low concentrations of the surfactant (0.10 mL/g substrate).

Paper pulp modification and deinking efficiency of cellulase-xylanase complex from Escherichia coli SD5

Ligno-cellulosic enzymes like cellulase and xylanase have potential for modification of paper pulp characteristics. A low molecular weight cellulase - xylanase complex (14KDa) was co-produced using Escherichia coli SD5. Co-existence of these enzymes was found to be advantageous in paper pulp modification and in deinking applications. The cellulase and xylanase exhibited specific activities of 51.95 and 24.64U/mg protein of respectively. Defibrillations, crack formation and changes in functional groups was evident from the SEM and FT-IR analysis of paper pulp following the enzyme treatment. The enzyme facilitated a better reduction of Kappa number and Hexenuronic acid (Hex A) compared to earlier studies. A Δ brightness of approximately 10% were achieved in case of both cellulase and xylanase for different treatment time. The tear strength of recycled paper was also found to increase after the enzymatic treatment. This is the first report on the application of a un-engineered E. coli isolate co-producing cellulase-xylanase for paper industrial application.

Coupling the pretreatment and hydrolysis of lignocellulosic biomass by the expression of beta-xylosidases.

Thermochemical pretreatment and enzymatic hydrolysis are the areas contributing most to the operational costs of second generation ethanol in lignocellulosic biorefineries. The improvement of lignocellulosic enzyme cocktails has been significant in the recent years. Although the needs for the reduction of the energy intensity and chemical consumption in the pretreatment step are well known, the reduction of the severity of the process strongly affects the enzymatic hydrolysis yield. To explore the formulation requirements of the well known cellulolytic cocktail from Myceliophthora thermophila on mild pretreated raw materials, this cocktail was tested on steam exploded corn stover without acid impregnation. The low hemicellulose yield and significant accumulation of xylobiose compared with the standard pretreated material obtained with dilute acid impregnation evidenced a clear limitation in the conversion of xylan to xylose. In order to complement the beta-xylosidase limitation, a selection of enzymes was expressed and tested in this fungus. A controlled expression of xylosidases from Aspergillus nidulans, Aspergillus fumigatus, and Fusarium oxysporum allowed recovering hemicellulose yields reached with standard acid treated material. The results underline the need of parallel development of the pretreatment process with the optimization of the formulation of the enzymatic cocktails.

Quantitative and visual analysis of enzymatic lignocellulose degradation

Abstract Lignocellulosic ethanol is a promising second-generation biofuel. However, production still faces huge challenges, especially in the field of pretreatment. Mechanical and enzymatic methods have been widely investigated, still little is known about the process of decomposition. Therefore, in this work three substrates: Miscanthus, switchgrass and wheat straw have been enzymatically hydrolyzed, after steam explosion treatment. Additionally, three additives Tween 80, peptone and ethanol have been tested for their influence on the enzymatic hydrolysis. The degree of decomposition has been evaluated by the amount of released sugars and by examination of the fiber structure by scanning electron microscopy. The images gave highly interesting insights into the degradation of the lignocellulosic scaffold and the weakening of the cellular cohesion. Hereby, the smaller fragments with epidermal structures showed a much higher degree of destruction than the stem parts. Therefore mechanical disintegration and use of certain additives is highly recommended as a pretreatment method.

Isolation, characterization and transcriptome analysis of a novel Antarctic Aspergillus sydowii strain MS-19 as a potential lignocellulosic enzyme source

BackgroundWith the growing demand for fossil fuels and the severe energy crisis, lignocellulose is widely regarded as a promising cost-effective renewable resource for ethanol production, and the use of lignocellulose residues as raw material is remarkable. Polar organisms have important value in scientific research and development for their novelty, uniqueness and diversity.ResultsIn this study, a fungus Aspergillus sydowii MS-19, with the potential for lignocellulose degradation was screened out and isolated from an Antarctic region. The growth profile of Aspergillus sydowii MS-19 was measured, revealing that Aspergillus sydowii MS-19 could utilize lignin as a sole carbon source. Its ability to synthesize low-temperature lignin peroxidase (Lip) and manganese peroxidase (Mnp) enzymes was verified, and the properties of these enzymes were also investigated. High-throughput sequencing was employed to identify and characterize the transcriptome of Aspergillus sydowii MS-19. Carbohydrate-Active Enzymes (CAZyme)-annotated genes in Aspergillus sydowii MS-19 were compared with those in the brown-rot fungus representative species, Postia placenta and Penicillium decumbens. There were 701CAZymes annotated in Aspergillus sydowii MS-19, including 17 cellulases and 19 feruloyl esterases related to lignocellulose-degradation. Remarkably, one sequence annotated as laccase was obtained, which can degrade lignin. Three peroxidase sequences sharing a similar structure with typical lignin peroxidase and manganese peroxidase were also found and annotated as haem-binding peroxidase, glutathione peroxidase and catalase-peroxidase.ConclusionsIn this study, the fungus Aspergillus sydowii MS-19 was isolated and shown to synthesize low-temperature lignin-degrading enzymes: lignin peroxidase (Lip) and manganese peroxidase (Mnp). These findings provide useful information to improve our understanding of low-temperature lignocellulosic enzyme production by polar microorganisms and to facilitate research and applications of the novel Antarctic Aspergillus sydowii strain MS-19 as a potential lignocellulosic enzyme source.

Boosting LPMO-driven lignocellulose degradation by polyphenol oxidase-activated lignin building blocks

BackgroundMany fungi boost the deconstruction of lignocellulosic plant biomass via oxidation using lytic polysaccharide monooxygenases (LPMOs). The application of LPMOs is expected to contribute to ecologically friendly conversion of biomass into fuels and chemicals. Moreover, applications of LPMO-modified cellulose-based products may be envisaged within the food or material industry.ResultsHere, we show an up to 75-fold improvement in LPMO-driven cellulose degradation using polyphenol oxidase-activated lignin building blocks. This concerted enzymatic process involves the initial conversion of monophenols into diphenols by the polyphenol oxidase MtPPO7 from Myceliophthora thermophila C1 and the subsequent oxidation of cellulose by MtLPMO9B. Interestingly, MtPPO7 shows preference towards lignin-derived methoxylated monophenols. Sequence analysis of genomes of 336 Ascomycota and 208 Basidiomycota reveals a high correlation between MtPPO7 and AA9 LPMO genes.ConclusionsThe activity towards methoxylated phenolic compounds distinguishes MtPPO7 from well-known PPOs, such as tyrosinases, and ensures that MtPPO7 is an excellent redox partner of LPMOs. The correlation between MtPPO7 and AA9 LPMO genes is indicative for the importance of the coupled action of different monooxygenases in the concerted degradation of lignocellulosic biomass. These results will contribute to a better understanding in both lignin deconstruction and enzymatic lignocellulose oxidation and potentially improve the exploration of eco-friendly routes for biomass utilization in a circular economy.

Lignocellulolytic Capability of Endophytic Phyllosticta sp.

The Dothideomycetes represent the largest fungal class of Ascomycota. It is an ubiquitous class of fungi whose members span a wide spectrum of lifestyles and host interactions. The endophytic fungus Phyllosticta is one members of the Dothideomycetes, causing disease in economic crops. Phyllosticta was screened for the degradation of lignocellulosic biomass of commercial relevance, such as rice straw, rice husk, sorghum, wheat straw, miscanthus, lavender flower, and lavender straw. The highest degrading strains were identified from an initial screen and further analyzed for the secretion of lignocellulosic enzymes during growth on the different biomasses. With Phyllosticta capitalensis (MFLUCC14-0233), maximum activity of arabinase (944.18 U/ml culture), cellulase (27.10 U/ml), xylanase (10.85 U/ml), pectinase (465.47 U/ml), and laccase (35.68 U/ml) activities could be detected in the secretome during growth on lavender flowers and lavender straw. Phyllosticta capitalensis is thus an interesting new strain for the production of lignocellulosic enzymes during growth on cheap agro-industrial biomass.

Functional characterization of the native swollenin from Trichoderma reesei: study of its possible role as C1 factor of enzymatic lignocellulose conversion.

BackgroundThrough binding to cellulose, expansin-like proteins are thought to loosen the structural order of crystalline surface material, thus making it more accessible for degradation by hydrolytic enzymes. Swollenin SWO1 is the major expansin-like protein from the fungus Trichoderma reesei. Here, we have performed a detailed characterization of a recombinant native form of SWO1 with respect to its possible auxiliary role in the enzymatic saccharification of lignocellulosic substrates.ResultsThe swo1 gene was overexpressed in T. reesei QM9414 Δxyr1 mutant, featuring downregulated cellulase production, and the protein was purified from culture supernatant. SWO1 was N-glycosylated and its circular dichroism spectrum suggested a folded protein. Adsorption isotherms (25 °C, pH 5.0, 1.0 mg substrate/mL) revealed SWO1 to be 120- and 20-fold more specific for binding to birchwood xylan and kraft lignin, respectively, than for binding to Avicel PH-101. The SWO1 binding capacity on lignin (25 µmol/g) exceeded 12-fold that on Avicel PH-101 (2.1 µmol/g). On xylan, not only the binding capacity (22 µmol/g) but also the affinity of SWO1 (Kd = 0.08 µM) was enhanced compared to Avicel PH-101 (Kd = 0.89 µM). SWO1 caused rapid release of a tiny amount of reducing sugars (<1 % of total) from different substrates (Avicel PH-101, nanocrystalline cellulose, steam-pretreated wheat straw, barley β-glucan, cellotetraose) but did not promote continued saccharification. Atomic force microscopy revealed that amorphous cellulose films were not affected by SWO1. Also with AFM, binding of SWO1 to cellulose nanocrystallites was demonstrated at the single-molecule level, but adsorption did not affect this cellulose. SWO1 exhibited no synergy with T. reesei cellulases in the hydrolysis of the different celluloses. However, SWO1 boosted slightly (1.5-fold) the reducing sugar release from a native grass substrate.ConclusionsSWO1 is a strongly glycosylated protein, which has implications for producing it in heterologous hosts. Although SWO1 binds to crystalline cellulose, its adsorption to xylan is much stronger. SWO1 is not an auxiliary factor of the enzymatic degradation of a variety of cellulosic substrates. Effect of SWO1 on sugar release from intact plant cell walls might be exploitable with certain (e.g., mildly pretreated) lignocellulosic feedstocks.

Enhancement of cellulosome-mediated deconstruction of cellulose by improving enzyme thermostability.

BackgroundThe concerted action of three complementary cellulases from Clostridium thermocellum, engineered to be stable at elevated temperatures, was examined on a cellulosic substrate and compared to that of the wild-type enzymes. Exoglucanase Cel48S and endoglucanase Cel8A, both key elements of the natural cellulosome from this bacterium, were engineered previously for increased thermostability, either by SCHEMA, a structure-guided, site-directed protein recombination method, or by consensus-guided mutagenesis combined with random mutagenesis using error-prone PCR, respectively. A thermostable β-glucosidase BglA mutant was also selected from a library generated by error-prone PCR that will assist the two cellulases in their methodic deconstruction of crystalline cellulose. The effects of a thermostable scaffoldin versus those of a largely mesophilic scaffoldin were also examined. By improving the stability of the enzyme subunits and the structural component, we aimed to improve cellulosome-mediated deconstruction of cellulosic substrates.ResultsThe results demonstrate that the combination of thermostable enzymes as free enzymes and a thermostable scaffoldin was more active on the cellulosic substrate than the wild-type enzymes. Significantly, “thermostable” designer cellulosomes exhibited a 1.7-fold enhancement in cellulose degradation compared to the action of conventional designer cellulosomes that contain the respective wild-type enzymes. For designer cellulosome formats, the use of the thermostabilized scaffoldin proved critical for enhanced enzymatic performance under conditions of high temperatures.ConclusionsSimple improvement in the activity of a given enzyme does not guarantee its suitability for use in an enzyme cocktail or as a designer cellulosome component. The true merit of improvement resides in its ultimate contribution to synergistic action, which can only be determined experimentally. The relevance of the mutated thermostable enzymes employed in this study as components in multienzyme systems has thus been confirmed using designer cellulosome technology. Enzyme integration via a thermostable scaffoldin is critical to the ultimate stability of the complex at higher temperatures. Engineering of thermostable cellulases and additional lignocellulosic enzymes may prove a determinant parameter for development of state-of-the-art designer cellulosomes for their employment in the conversion of cellulosic biomass to soluble sugars.Graphical abstractConversion of conventional designer cellulosomes into thermophilic designer cellulosomesElectronic supplementary materialThe online version of this article (doi:10.1186/s13068-016-0577-z) contains supplementary material, which is available to authorized users.

Applying functional metagenomics to search for novel lignocellulosic enzymes in a microbial consortium derived from a thermophilic composting phase of sugarcane bagasse and cow manure.

Environments where lignocellulosic biomass is naturally decomposed are sources for discovery of new hydrolytic enzymes that can reduce the high cost of enzymatic cocktails for second-generation ethanol production. Metagenomic analysis was applied to discover genes coding carbohydrate-depleting enzymes from a microbial laboratory subculture using a mix of sugarcane bagasse and cow manure in the thermophilic composting phase. From a fosmid library, 182 clones had the ability to hydrolyse carbohydrate. Sequencing of 30 fosmids resulted in 12 contigs encoding 34 putative carbohydrate-active enzymes belonging to 17 glycosyl hydrolase (GH) families. One third of the putative proteins belong to the GH3 family, which includes β-glucosidase enzymes known to be important in the cellulose-deconstruction process but present with low activity in commercial enzyme preparations. Phylogenetic analysis of the amino acid sequences of seven selected proteins, including three β-glucosidases, showed low relatedness with protein sequences deposited in databases. These findings highlight microbial consortia obtained from a mixture of decomposing biomass residues, such as sugar cane bagasse and cow manure, as a rich resource of novel enzymes potentially useful in biotechnology for saccharification of lignocellulosic substrate.

Metagenomic analysis of microbial consortia enriched from compost: new insights into the role of Actinobacteria in lignocellulose decomposition.

BackgroundCompost habitats sustain a vast ensemble of microbes specializing in the degradation of lignocellulosic plant materials and are thus important both for their roles in the global carbon cycle and as potential sources of biochemical catalysts for advanced biofuels production. Studies have revealed substantial diversity in compost microbiomes, yet how this diversity relates to functions and even to the genes encoding lignocellulolytic enzymes remains obscure. Here, we used a metagenomic analysis of the rice straw-adapted (RSA) microbial consortia enriched from compost ecosystems to decipher the systematic and functional contexts within such a distinctive microbiome.ResultsAnalyses of the 16S pyrotag library and 5 Gbp of metagenomic sequence showed that the phylum Actinobacteria was the predominant group among the Bacteria in the RSA consortia, followed by Proteobacteria, Firmicutes, Chloroflexi, and Bacteroidetes. The CAZymes profile revealed that CAZyme genes in the RSA consortia were also widely distributed within these bacterial phyla. Strikingly, about 46.1 % of CAZyme genes were from actinomycetal communities, which harbored a substantially expanded catalog of the cellobiohydrolase, β-glucosidase, acetyl xylan esterase, arabinofuranosidase, pectin lyase, and ligninase genes. Among these communities, a variety of previously unrecognized species was found, which reveals a greater ecological functional diversity of thermophilic Actinobacteria than previously assumed.ConclusionThese data underline the pivotal role of thermophilic Actinobacteria in lignocellulose biodegradation processes in the compost habitat. Besides revealing a new benchmark for microbial enzymatic deconstruction of lignocelluloses, the results suggest that actinomycetes found in compost ecosystems are potential candidates for mining efficient lignocellulosic enzymes in the biofuel industry.Electronic supplementary materialThe online version of this article (doi:10.1186/s13068-016-0440-2) contains supplementary material, which is available to authorized users.

Effects of Different Substrates on Lignocellulosic Enzyme Expression, Enzyme Activity, Substrate Utilization and Biological Efficiency of Pleurotus Eryngii

Background/Aims: Pleurotus eryngii is one of the most valued and delicious mushrooms which are commercially cultivated on various agro-wastes. How different substrates affect lignocellulosic biomass degradation, lignocellulosic enzyme production and biological efficiency in Pleurotus eryngii was unclear. Methods and Results: In this report, Pleurotus eryngii was cultivated in substrates including ramie stalks, kenaf stalks, cottonseed hulls and bulrush stalks. The results showed that ramie stalks and kenaf stalks were found to best suitable to cultivate Pleurotus eryngii with the biological efficiency achieved at 55% and 57%, respectively. In order to establish correlations between different substrates and lignocellulosic enzymes expression, the extracellular proteins from four substrates were profiled with high throughput TMT-based quantitative proteomic approach. 241 non-redundant proteins were identified and 74 high confidence lignocellulosic enzymes were quantified. Most of the cellulases, hemicellulases and lignin depolymerization enzymes were highly up-regulated when ramie stalks and kenaf stalks were used as carbon sources. The enzyme activities results suggested cellulases, hemicellulases and lignin depolymerization enzymes were significantly induced by ramie stalks and kenaf stalks. Conclusion: The lignocelluloses degradation, most of the lignocellulosic enzymes expressions and activities of Pleurotus eryngii had positive correlation with the biological efficiency, which depend on the nature of lignocellulosic substrates. In addition, the lignocellulosic enzymes expression profiles during Pleurotus eryngii growth in different substrates were obtained. The present study suggested that most of the lignocellulosic enzymes expressions and activities can be used as tools for selecting better performing substrates for commercial mushroom cultivation.

Lignocellulose degrading extremozymes produced by Pichia pastoris: current status and future prospects.

In this review article, extremophilic lignocellulosic enzymes with special interest on xylanases, β-mannanases, laccases and finally cellulases, namely, endoglucanases, exoglucanases and β-glucosidases produced by Pichia pastoris are reviewed for the first time. Recombinant lignocellulosic extremozymes are discussed from the perspectives of their potential application areas; characteristics of recombinant and native enzymes; the effects of P. pastoris expression system on recombinant extremozymes; and their expression levels and applied strategies to increase the enzyme expression yield. Further, effects of enzyme domains on activity and stability, protein engineering via molecular dynamics simulation and computational prediction, and site-directed mutagenesis and amino acid modifications done are also focused. Superior enzyme characteristics and improved stability due to the proper post-translational modifications and better protein folding performed by P. pastoris make this host favourable for extremozyme production. Especially, glycosylation contributes to the structure, function and stability of enzymes, as generally glycosylated enzymes produced by P. pastoris exhibit better thermostability than non-glycosylated enzymes. However, there has been limited study on enzyme engineering to improve catalytic efficiency and stability of lignocellulosic enzymes. Thus, in the future, studies should focus on protein engineering to improve stability and catalytic efficiency via computational modelling, mutations, domain replacements and fusion enzyme technology. Also metagenomic data need to be used more extensively to produce novel enzymes with extreme characteristics and stability.

Comparative Secretome Analysis of Aspergillus niger, Trichoderma reesei, and Penicillium oxalicum During Solid-State Fermentation.

Filamentous fungi such as Aspergillus spp., Trichoderma spp., and Penicillium spp. are frequently used to produce high concentrations of lignocellulosic enzymes. This study examined the discrepancies in the compositions and dynamic changes in the extracellular enzyme systems secreted by Aspergillus niger ATCC1015, Trichoderma reesei QM9414, and Penicillium oxalicum 114-2 cultured on corn stover and wheat bran. The results revealed different types and an abundance of monosaccharides and oligosaccharides were released during incubation, which induced the secretion of diverse glycoside hydrolases. Both the enzyme activities and isozyme numbers of the three fungal strains increased with time. A total of 279, 161, and 183 secretory proteins were detected in A. niger, T. reesei, and P. oxalicum secretomes, respectively. In the A. niger secretomes, more enzymes involved in the degradation of (galacto)mannan, xyloglucan, and the backbone of pectin distributed mostly in dicots were detected. In comparison, although P. oxalicum 114-2 hardly secreted any xyloglucanases, the diversities of enzymes involved in the degradation of xylan and β-(1,3;1,4)-D-glucan commonly found in monocots were higher. The cellulase system of P. oxalicum 114-2 was more balanced. The degradation preference provided a new perspective regarding the recomposition of lignocellulosic enzymes based on substrate types.

A Weibull statistics-based lignocellulose saccharification model and a built-in parameter accurately predict lignocellulose hydrolysis performance.

Renewable energy from lignocellulosic biomass has been deemed an alternative to depleting fossil fuels. In order to improve this technology, we aim to develop robust mathematical models for the enzymatic lignocellulose degradation process. By analyzing 96 groups of previously published and newly obtained lignocellulose saccharification results and fitting them to Weibull distribution, we discovered Weibull statistics can accurately predict lignocellulose saccharification data, regardless of the type of substrates, enzymes and saccharification conditions. A mathematical model for enzymatic lignocellulose degradation was subsequently constructed based on Weibull statistics. Further analysis of the mathematical structure of the model and experimental saccharification data showed the significance of the two parameters in this model. In particular, the λ value, defined the characteristic time, represents the overall performance of the saccharification system. This suggestion was further supported by statistical analysis of experimental saccharification data and analysis of the glucose production levels when λ and n values change. In conclusion, the constructed Weibull statistics-based model can accurately predict lignocellulose hydrolysis behavior and we can use the λ parameter to assess the overall performance of enzymatic lignocellulose degradation. Advantages and potential applications of the model and the λ value in saccharification performance assessment were discussed.

Saccharification of sunflower stalks using lignocellulases from a fungal consortium comprising Pholiota adiposa and Armillaria gemina.

Lignocellulases from Armillaria gemina and Pholiota adiposa are efficient in hydrolyzing aspen and poplar biomass, respectively. In the present study, lignocellulosic enzymes obtained from a fungal consortium comprising P. adiposa and A. gemina were used for the saccharification of sunflower stalks. Sunflower stalks were thermochemically pretreated using 2% NaOH at 50°C for 24h. The saccharification process parameters including substrate concentration, enzyme loading, pH, and temperature were optimized using response surface methodology to improve the saccharification yield. The highest enzymatic hydrolysis (84.3%) was obtained using the following conditions: enzyme loading 10 FPU/g-substrate, substrate 5.5%, temperature 50°C, and pH 4.5. The hydrolysis yield obtained using the enzymes from the fungal consortium was equivalent to that obtained using a mixture of commercial enzymes Celluclast and Novozyme β-glucosidase. Addition of up to 500ppm of heavy metal ions (As, Cu, Fe, Mn, Ni, Pb, and Zn) during saccharification did not significantly affect the saccharification yield. Thus, the biomass grown for phytoremediation of heavy metals can be used for the production of reducing sugars followed by ethanol fermentation.

Current perspectives in enzymatic saccharification of lignocellulosic biomass

With the depletion of fossil fuel reserves, there is an urgent need to search for renewable and cost effective strategies for biofuel production. Lignocellulosic biomass has been perceived as a potential feedstock, wherein effective pretreatment and saccharification is necessary prerequisite for developing viable biofuel processes. Recent approaches in this context are, (i) studying enzymes from extremophilic organisms, particularly thermophiles which are gaining importance in this aspect as they are found to be stable and catalytically more effective under harsh conditions; (ii) usage of ionic liquids for pretreatment is emerging as a greener technology due to their non toxic nature. Developing/screening for ionic liquid tolerant lignocellulosic enzymes in order to attain simultaneous pretreatment and saccharification, offer an interesting option; and (iii) engineering/manipulating the existing lignocellulosic enzymes for desirable traits and viable saccharification and biofuel generation processes. The review encompasses these approaches and the focus on the recent development in the area.

Production and immobilization of enzymes by solid-state fermentation of agroindustrial waste.

The recovery of by-products from agri-food industry is currently one of the major challenges of biotechnology. Castilla-La Mancha produces around three million tons of waste coming from olive oil and wine industries, both of which have a pivotal role in the economy of this region. For this reason, this study reports on the exploitation of grape skins and olive pomaces for the production of lignocellulosic enzymes, which are able to deconstruct the agroindustrial waste and, therefore, reuse them in future industrial processes. To this end, solid-state fermentation was carried out using two local fungal strains (Aspergillus niger-113N and Aspergillus fumigatus-3). In some trials, a wheat supplementation with a 1:1 ratio was used to improve the growth conditions, and the particle size of the substrates was altered through milling. Separate fermentations were run and collected after 2, 4, 6, 8, 10 and 15days to monitor enzymatic activity (xylanase, cellulase, β-glucosidase, pectinase). The highest values were recorded after 10 and 15days of fermentation. The use of A. niger on unmilled grape skin yielded the best outcomes (47.05U xylanase/g by-product). The multi-enzymatic extracts obtained were purified, freeze dried, and immobilized on chitosan by adsorption to assess the possible advantages provided by the different techniques.