Light Traps Research Articles

Culicoides Species of the Rain Forest Belt of the Littoral Region of Cameroon: Their Incrimination in the Transmission of Mansonella perstans.

Biting midges belonging to the genus Culicoides are tiny stout-shaped hematophagous insects and are thought to transmit the filarial nematode Mansonella perstans. Little is known about the Culicoides fauna in the rain forest belt of the Littoral Region of Cameroon. This study was designed to investigate the diversity, abundance and distribution of Culicoides spp. and their role as the purported vector(s) of M. perstans. Overnight light trap collections and human landing catches (HLCs) revealed eight species of Culicoides with C. grahamii being the most abundant species followed by C. milnei. Four anthropophilic species (C. inornatipennis, C. grahamii, C. fulvithorax and C. milnei) were determined by the HLCs with a higher abundance in the 4-6 p.m. collections. The drop trap technique and Mp419 LAMP assay confirmed C. milnei to be the most efficient vector in enabling the development of the microfilarial stage to the infective larval form of M. perstans. The LAMP assay also revealed that natural transmission of this nematode is fostered by C. milnei and C. grahamii in the wild. In conclusion, C. milnei was shown to be the main vector of M. perstans in the rain forest belt of the Littoral Region of Cameroon.

Occurrence of larval fishes sampled by drifting light traps in the lower reaches of a South African estuary.

The tidal occurrence of larval fishes was investigated in the permanently open Kowie Estuary on the warm-temperate coast of South Africa. Larval fishes were sampled in the mouth region using two drifting light traps deployed on the ebb and flood tides every second night for two consecutive 14-day periods, coinciding with the dark moon phase. A total of 553 larval fishes were caught, representing nine families and 26 species, of which Blenniidae and Clupeidae dominated. The prevalence of different estuarine association fish guilds was also tide-specific. Marine and estuarine species, such as Omobranchus woodi, were more dominant during flood tides, while marine straggler species, such as Sardinops sagax, which are not dependent on estuaries, were dominant on the ebb tide. Marine estuarine-dependents were only present during flood tides, potentially indicating ingress and entrainment within the estuary. The results confirm that light trap catches yield a different composition of species compared to towed ichthyoplankton net studies. Additionally, drifting light traps allow for better targeting of species with a phototactic response and reduction of incidental catch. Consequently, a mixture of gear is encouraged for more comprehensive surveys of larval fish occurrence.

High-flux source system for matter-wave interferometry exploiting tunable interactions

Atom interferometers allow determining inertial effects to high accuracy. Quantum-projection noise as well as systematic effects impose demands on large atomic flux as well as ultralow expansion rates. Here we report on a high-flux source of ultracold atoms with free expansion rates near the Heisenberg limit directly upon release from the trap. Our results are achieved in a time-averaged optical dipole trap and enabled through dynamic tuning of the atomic scattering length across two orders of magnitude interaction strength via magnetic Feshbach resonances. We demonstrate Bose-Einstein condensates with more than 6×104 particles after evaporative cooling for 170 ms and their subsequent release with a minimal expansion energy of 4.5 nK in one direction. Based on our results we estimate the performance of an atom interferometer and compare our source system to a high performance chip trap, as readily available for ultraprecise measurements in microgravity environments. Published by the American Physical Society 2024

X-Arapuca long term test

The photon detection system of the DUNE experiment is based on the X-ARAPUCA light trap. The basic elements of the X-ARAPUCA are the dichroic filters coated with wavelength shifter (para-Therphenyl), a waveshifting plate and an array of SiPMs which detects the trapped photons. A small scale prototype of the X-ARAPUCA has been installed in liquid argon in a dedicated facility at INFN-Napoli and exposed to alpha particles from a source. In order to test the stability of the overall device response the X-ARAPUCA was kept for 10 days in continuously purified liquid argon. The performed tests allowed for a preliminary estimation of the X-ARAPUCA absolute photon detection efficiency.

Ultracold field-linked tetratomic molecules.

Ultracold polyatomic molecules offer opportunities1 in cold chemistry2,3, precision measurements4 and quantum information processing5,6, because of their rich internal structure. However, their increased complexity compared with diatomic molecules presents a challenge in using conventional cooling techniques. Here we demonstrate an approach to create weakly bound ultracold polyatomic molecules by electroassociation7 (F.D. et al., manuscript in preparation) in a degenerate Fermi gas of microwave-dressed polar molecules through a field-linked resonance8-11. Starting from ground-state NaK molecules, we create around 1.1 × 103 weakly bound tetratomic (NaK)2 molecules, with a phase space density of 0.040(3) at a temperature of 134(3) nK, more than 3,000 times colder than previously realized tetratomic molecules12. We observe a maximum tetramer lifetime of 8(2) ms in free space without a notable change in the presence of an optical dipole trap, indicating that these tetramers are collisionally stable. Moreover, we directly image the dissociated tetramers through microwave-field modulation to probe the anisotropy of their wavefunction in momentum space. Our result demonstrates a universal tool for assembling weakly bound ultracold polyatomic molecules from smaller polar molecules, which is a crucial step towards Bose-Einstein condensation of polyatomic molecules and towards a new crossover from a dipolar Bardeen-Cooper-Schrieffer superfluid13-15 to a Bose-Einstein condensation of tetramers. Moreover, the long-lived field-linked state provides an ideal starting point for deterministic optical transfer to deeply bound tetramer states16-18.

First identification of Microsporidia MB in Anopheles coluzzii from Zinder City, Niger

BackgroundMalaria, a disease transmitted by Anopheles mosquitoes, is a major public health problem causing millions of deaths worldwide, mostly among children under the age of 5 years. Biotechnological interventions targeting parasite-vector interactions have shown that the microsporidian symbiont Microsporidia MB has the potential to disrupt and block Plasmodium transmission.MethodsA prospective cross-sectional survey was conducted in Zinder City (Zinder), Niger, from August to September 2022, using the CDC light trap technique to collect adult mosquitoes belonging to the Anopheles gambiae complex. The survey focused on collecting mosquitoes from three neighborhoods of Zinder (Birni, Kangna and Garin Malan, located in communes I, II and IV, respectively). Collected mosquitoes were sorted and preserved in 70% ethanol. PCR was used to identify host species and detect the presence of Microsporidia MB and Plasmodium falciparum infection.ResultsOf the 257 Anopheles mosquitoes collected and identified by PCR, Anopheles coluzzii was the most prevalent species, accounting for 97.7% of the total. Microsporidia MB was exclusively detected in A. coluzzii, with a prevalence of 6.8% (17/251) among the samples. No significant difference in prevalence was found among the three neighborhoods. Only one An. coluzzii mosquito tested PCR-positive for P. falciparum.ConclusionsThe results confirm the presence of Microsporidia MB in Anopheles mosquitoes in Zinder, Niger, indicating its potential use as a biotechnological intervention against malaria transmission. However, further studies are needed to determine the efficacy of Microsporidia MB to disrupt Plasmodium transmission as well as its impact on vector fitness.Graphical

Dynamics of malaria vector composition and Plasmodium falciparum infection in mainland Tanzania: 2017–2021 data from the national malaria vector entomological surveillance

BackgroundIn 2015, Tanzania National Malaria Control Programme (NMCP) established a longitudinal malaria vector entomological surveillance (MVES). The MVES is aimed at a periodical assessment of malaria vector composition and abundance, feeding and resting behaviours, and Plasmodium falciparum infection in different malaria epidemiological strata to guide the NMCP on the deployment of appropriate malaria vector interventions. This work details the dynamics of malaria vector composition and transmission in different malaria epidemiological strata.MethodsThe MVES was conducted from 32 sentinel district councils across the country. Mosquitoes were collected by the trained community members and supervised by the NMCP and research institutions. Three consecutive night catches (indoor collection with CDC light trap and indoor/outdoor collection using bucket traps) were conducted monthly in three different households selected randomly from two to three wards within each district council. Collected mosquitoes were sorted and morphologically identified in the field. Thereafter, the samples were sent to the laboratory for molecular characterization using qPCR for species identification and detection of P. falciparum infections (sporozoites). ELISA technique was deployed for blood meal analysis from samples of blood-fed mosquitoes to determine the blood meal indices (BMI).ResultsA total of 63,226 mosquitoes were collected in 32 district councils from January 2017 to December 2021. Out of which, 39,279 (62%), 20,983 (33%) and 2964 (5%) were morphologically identified as Anopheles gambiae sensu lato (s.l.), Anopheles funestus s.l., and as other Anopheles species, respectively. Out of 28,795 laboratory amplified mosquitoes, 13,645 (47%) were confirmed to be Anopheles arabiensis, 9904 (34%) as An. funestus sensu stricto (s.s.), and 5193 (19%) as An. gambiae s.s. The combined average entomological inoculation rates (EIR) were 0.46 (95% CI 0.028–0.928) for An. gambiae s.s., 0.836 (95% CI 0.138–1.559) for An. arabiensis, and 0.58 (95% CI 0.165–0.971) for An. funestus s.s. with variations across different malaria transmission strata. Anopheles funestus s.s. and An. arabiensis were predominant in the Lake and South-Eastern zones, respectively, mostly in high malaria transmission areas. Monthly mosquito densities displayed seasonal patterns, with two peaks following the rainy seasons, varying slightly across species and district councils.ConclusionAnopheles arabiensis remains the predominant vector species followed by An. funestus s.s. in the country. Therefore, strengthening integrated vector management including larval source management is recommended to address outdoor transmission by An. arabiensis to interrupt transmission particularly where EIR is greater than the required elimination threshold of less than one (< 1) to substantially reduce the prevalence of malaria infection.

Comparative assessment of a novel fan box trap for collecting Anopheles farauti and culicine mosquitoes alive in tropical north Queensland, Australia.

During preliminary mosquito surveys at Cowley Beach Training Area in north Queensland, Australia, it was found that the utility of the standard encephalitis virus surveillance (EVS) trap for collecting the malaria vector Anopheles farauti (Laveran) adults was compromised by the harsh tropical conditions. With the aim of increasing the survival rate of mosquitoes, we designed a downdraft fan box trap (FBT) that incorporated a screened fan at the bottom of the trap, so mosquitoes did not have to pass through a fan. The FBT was tested against the EVS and Centers for Disease Control (CDC) light traps, where mosquitoes do pass through a fan, and a nonpowered passive box trap (PBT). We conducted 4 trials to compare the quantity and survival of An. farauti and culicine mosquitoes were collected in these traps. Although not significant, the FBT collected more An. farauti than the EVS trap and PBT and significantly less An. farauti than the CDC light trap. However, the FBT improved on the CDC light trap in terms of the survival of An. farauti adults collected, with a significantly higher percentage alive in the FBT (74.6%) than in the CDC light trap (27.5%). Thus, although the FBT did not collect as many anophelines as the CDC, it proved to be superior to current trap systems for collecting large numbers of live and relatively undamaged mosquitoes. Therefore, it is recommended that FBTs be used for collecting An. farauti adults in northern Australia, especially when high survival and sample quality are important.

Device Structure, Light Source Height, and Sunset Time Affect the Light-Trap Catching of Tea Leafhoppers.

Device structure, light source height, and climatic factors can potentially affect the catching of target pests in light traps. In this study, the installation of an anti-escape cover in a newly designed light trap significantly increased the number of catches of tea leafhoppers, Empoasca onukii, an economically significant pest of tea gardens, and it prevented 97.95% of leafhoppers from escaping. A series of assessments were performed in the field and showed that the optimal trapping window of the light trap was between 1.5 and 2.5 h (2 ± 0.35 h) after sunset, and the starting time of the window was positively correlated with the sunset time. The number of leafhopper catches decreased sharply when the height of the light source was above the flight height range of E. onukii adults. The height of the light source was optimal between 20 and 40 cm above the tea canopy. The efficacy of the light traps for capturing leafhoppers decreased in the autumn peak period. High numbers of leafhopper catches by the newly designed light trap in the summer could reduce E. onukii population sizes in the autumn. Overall, the newly designed light trap can be used to reduce E. onukii adult populations in tea gardens.

Ice templated and ice seed tailored hydrogels for highly efficient solar evaporator

In recent years, freshwater resources have become a global concern, and solar vapor generation (SVG) has garnered significant attention from researchers. Herein, a novel hydrogel solar evaporator was prepared by incorporating lignin and CuS-rGO into a chitosan-gelatin matrix. The anisotropic and isotropic morphologies of the hydrogel were prepared by pathway control on the solidification velocities of ice crystals and ice seeds. It presented that the anisotropic morphology can improve the refraction of light and increase the utilization rate of light by forming a light trap, leading to higher water evaporation rate. Additionally, ice seed was introduced during the freezing process, producing an anisotropic hydrogel with curled layer structure that endowed lower enthalpy of water evaporation and faster water transfer rate, resulting in high evaporate of 3.62 kg m−2 h−1 under one solar irradiation with photothermal conversion efficiency of 97.7 %. Finally, the gel also demonstrated good mechanical properties, long-term working stability and harsh environment tolerance, which make it ideal for outdoor applications. The hydrogel evaporator had potential to generate 25.24 kg m2 water per day that could meet the huge demand for freshwater as sources.

Environmental and geographical factors influence the occurrence and abundance of the southern house mosquito, Culex quinquefasciatus, in Hawai‘i

Hawaiian honeycreepers, a group of endemic Hawaiian forest birds, are being threatened by avian malaria, a non-native disease that is driving honeycreepers populations to extinction. Avian malaria is caused by the parasite Plasmodium relictum, which is transmitted by the invasive mosquito Culex quinquefasciatus. Environmental and geographical factors play an important role in shaping mosquito-borne disease transmission dynamics through their influence on the distribution and abundance of mosquitoes. We assessed the effects of environmental (temperature, precipitation), geographic (site, elevation, distance to anthropogenic features), and trap type (CDC light trap, CDC gravid trap) factors on mosquito occurrence and abundance. Occurrence was analyzed using classification and regression tree models (CART) and generalized linear models (GLM); abundance (count data) was analyzed using generalized linear mixed models (GLMMs). Models predicted highest mosquito occurrence at mid-elevation sites and between July and November. Occurrence increased with temperature and precipitation up to 580 mm. For abundance, the best model was a zero-inflated negative-binomial model that indicated higher abundance of mosquitoes at mid-elevation sites and peak abundance between August and October. Estimation of occurrence and abundance as well as understanding the factors that influence them are key for mosquito control, which may reduce the risk of forest bird extinction.

Breeding habitats, bionomics and phylogenetic analysis of Aedes aegypti and first detection of Culiseta longiareolata, and Ae. hirsutus in Somali Region, eastern Ethiopia.

Arboviral diseases, such as dengue, chikungunya, yellow fever, and Zika, are caused by viruses that are transmitted to humans through mosquito bites. However, the status of arbovirus vectors in eastern Ethiopia is unknown. The aim of this study was to investigate distribution, breeding habitat, bionomics and phylogenetic relationship of Aedes aegypti mosquito species in Somali Regional State, Eastern Ethiopia. Entomological surveys were conducted in four sites including Jigjiga, Degehabur, Kebridehar and Godey in 2018 (October to December) to study the distribution of Ae. aegypti and with a follow-up collection in 2020 (July-December). In addition, an investigation into the seasonality and bionomics of Ae. aegypti was conducted in 2021 (January-April) in Kebridehar town. Adult mosquitoes were collected from indoor and outdoor locations using CDC light traps (LTs), pyrethrum spray collection (PSCs), and aspirators. Larvae and pupae were also collected from a total of 169 water-holding containers using a dipper between October and November 2020 (rainy season) in Kebridehar town. The species identification of wild caught and reared adults was conducted using a taxonomic key. In addition, species identification using mitochondrial and nuclear genes maximum likelihood-based phylogenetic analysis was performed. In the 2018 collection, Ae. aegypti was found in all study sites (Jigjiga, Degahabour, Kebridehar and Godey). In the 2020-2021 collection, a total of 470 (Female = 341, Male = 129) wild caught adult Ae. aegypti mosquitoes were collected, mostly during the rainy season with the highest frequency in November (n = 177) while the lowest abundance was in the dry season (n = 14) for both February and March. The majority of Ae. aegypt were caught using PSC (n = 365) followed by CDC LT (n = 102) and least were collected by aspirator from an animal shelter (n = 3). Aedes aegypti larval density was highest in tires (0.97 larvae per dip) followed by cemented cisterns (0.73 larvae per dip) and the Relative Breeding Index (RBI) was 0.87 and Container Index (CI) was 0.56. Genetic analysis of ITS2 and COI revealed one and 18 haplotypes, respectively and phylogenetic analysis confirmed species identification. The 2022 collection revealed no Ae. aegpti, but two previously uncharacterized species to that region. Phylogenetic analysis of these two species revealed their identities as Ae. hirsutus and Culiseta longiareolata. Data from our study indicate that, Ae. aegypti is present both during the wet and dry seasons due to the availability of breeding habitats, including water containers like cemented cisterns, tires, barrels, and plastic containers. This study emphasizes the necessity of establishing a national entomological surveillance program for Aedes in Somali region.

Experimental realization of one-dimensional single-atom array based on microscale optical dipole traps

Neutral atom array serves as a crucial experimental platform for studying many-body physics, quantum computing, and quantum simulation. In this work, we describe in detail the experimental process of preparing a one-dimensional homogeneous single atom array containing 40 Cs atoms, including the dipole trap array generation device, atomic array fluorescence imaging, and the uniformity optimization of the dipole trap array. The beam waist of the dipole trap is about 1.8 μm, and the spatial resolution of the imaging system is higher than 1.55 μm. The non-uniformity of dipole trap array is mainly caused by the intermodulation effect of multi-tone signal during amplification. The uniformity of the dipole trap array is optimized to 2% (Fig. (a)) by measuring the fluctuations of the dipole trap intensity and the light shift of trapped atom, and providing feedback to adjust the phase and amplitude applied to the multi-tone RF signal on acousto-optic deflectors. Furthermore, the uniformity of oscillation frequency, loading rate, and lifetime for trapped atom in the dipole trap array are measured. These results show that oscillation frequency has a uniformity within 2% (Fig. (b)); mean loading rate is around 58% with a uniformity within 3%; and mean lifetime of single atom in dark trap is around 6(1) s with a uniformity within 8%.

The Collapsible Light Trap: a portable Pennsylvania Light Trap for collecting aquatic insects.

A Collapsible Light Trap (CLT) for collecting insects, particularly aquatic insects, is described here. CLT is a modified Pennsylvania Light Trap with the advantage of being collapsible and lightweight to be carried in a small backpack and very easy to set up in the field. CLT is equipped with LED light strip wrapped around a PVC tube and can be connected to a regular 12 V / 7 Ah battery, running for more than 48 uninterrupted hours. Complete CLT weighs 0.8-1.0 kg, depending on the metal used, and the battery weighs around 2 kg, being easily transportable to more remote collecting areas. Over the years, CLTs have been used for collecting and describing the diversity of aquatic insects from Brazil, particularly caddisflies. Depending on the locality, only one trap for one night can collect over a thousand insect specimens and more than 200 individuals of caddisflies.

Distribution, survivability and susceptibility status of Anopheles mosquitoes in Kamamaung Township, Kayin State in Myanmar

Malaria endemicity is remaining in hard to reach and insurgent areas in Myanmar, where high density of primary and secondary vectors are available. Present study was determined the distribution, survivability and insecticides susceptibility status of vectors and non-vectors of malaria in Katinehtit village Kamamaung Township, Kayin State from July 2020 to June 2021. Mosquitoes were collected by Kanda net for animal bait and CDC light traps for indoor and outdoor collection from 18:00 to 00:06 hour. Survivability rate of An. dirus, An. minimu, An. aconitus, An. philippinensis, An. vagus and An. culicifacies were measured under the group of banana plants and susceptibility of collected mosquitoes were tested with WHO recommended insecteds. A total of 2207 mosquitoes consist of 13 Anopheles mosquito adult were collected by different collection methods by Cattle bate 1581(71.64%), Light trap indoor 174(7.88%), Light trap outdoor 297(13.46%), Morning Resting 43(1.95%) and Near the resting plant 112(5.07). Main vector An. dirus and An. minimus were mostly collected in Rainey season in high density and An. dirus was disappeared in hot season. Main vector An. minimus and secondary vector as An. philippinensis, An. culicifacies, An. maculatus, An. aconitus and nan vector An. barbirostris and An. hyrcanus were collected in all seasons. An. philippinensis, An. barbirostris and An. hyrcanus were abundantly collected. The highest survivability rate was found An. dirus and An. vagus for 8 days (10%) followed by An. culicifacies (20%), An. philippinensis (10%), An. minimus (20%) for 7 days and lowest was found An. aconitus for 6 days (20%). High density of An. dirus larvae were collected from rock pools and An. minimus was collected in sand pools, rice fields water, bed of Yonsalin creeks and water pools. All the collected mosquitoes were susceptible to Deltamethrin 0.05%, Permethrin 0.75% and Cyfuthris 0.15%. In conclusion, high density of main malaria vectors and secondary vectors were collected from Katinehtit village is a high risk area of malaria. Although all the collected main and secondary vectors were susceptible to WHO recommended insecticides. Therefore, Long Lasting Insecticide impregnated nets can be preventing the transmission of malaria in this area.

Designing and Evaluating a Portable UV-LED Vane Trap to Expedite Arthropod Biodiversity Discovery.

A novel design of a portable funnel light trap (PFLT) was presented for collecting insects in ecological studies. The trap consists of a compact plastic box equipped with a light source and power source, along with two plastic polypropylene interception vanes. The PFLT costs 18.3 USD per unit and weighs approximately 300 g. A maximum of six PFLT units can be packed in one medium-sized backpack (32 cm × 45 cm × 15 cm, 20 L), making it easier to set up multiple units in remote areas wherein biodiversity research is needed. The low cost and weight of the trap also allows for large-scale deployment. The design is customizable and can be easily manufactured to fit various research needs. To validate the PFLT's efficacy in collecting insects across different habitat types, a series of field experiments were conducted in South Korea and Laos, where 37 trials were carried out. The PFLT successfully collected 7497 insects without experiencing battery issues or damage by rain or wind. Insect compositions and abundances differed across the three sampled habitat types: forests, grasslands, and watersides. This new FLT trap is an important tool for studying and protecting insect biodiversity, particularly in areas wherein conventional light traps cannot be deployed.

Levitation of air-borne strong-absorbing nanoparticle clusters dominated by photophorestic force and migration behavior under thermophorestic force

In order to explore the levitation and migration behavior of strongly absorbing nanoparticle clusters in air by using laser technique, in this study trapping and levitating nanoparticle clusters is proposed based on the counter-propagated bi-Bessel beams, and then the clusters are released to observe and analyze their migration behaviors. Two Bessel beams are generated by a conical lens and polarizing beam splitter, arranged horizontally in reverse to form a three-dimensional optical trap. The stiffness of the optical trap can be controlled by adjusting the power ratio of the two Bessel beams. The particles in the levitation chamber are fluidized through weak airflow, and then captured and levitated by a light trap. A high-speed camera is used to record the levitation and migration process of clusters. The particle motion parameters can be obtained through image analysis. The strong-absorbing ultrafine coal particle clusters are first selected to conduct the experiments on their levitation and release migration. Then, the photophorestic force, gravity, buoyancy, drag force, and thermophorestic force acting on the clusters are calculated and analyzed. The experimental and computational results indicate that the photophorestic force of air-borne strong-absorbing nanoparticle clusters generated by laser illumination dominates the levitation; nanoparticle clusters can be stably levitated in a three-dimensional potential well formed by counter-propagated bi-Bessel beams, achieving dynamic equilibrium with gravity, buoyancy, drag, etc. by adjusting the levitation position. The relative instability parameter of levitation is used to evaluate the stability of air-borne strong-absorbing nanoparticle clusters, and the minimum relative instability of ultrafine coal particle clusters reaches 0.075. By analyzing the images of nanoparticle cluster recorded by high-speed camera after being released, the migration motion parameters of the cluster can be obtained, therefore the thermophorestic force acting on the cluster is accurately measured. For the ultrafine coal particle clusters with equivalent particle sizes in a range of approximately 13–21 μm, the magnitudes of their thermophorestic forces are in a range of 10&lt;sup&gt;–11&lt;/sup&gt;–10&lt;sup&gt;–10&lt;/sup&gt; N. As the cluster size increases, the thermophorestic force increases linearly, which is consistent with the theoretical calculation trend. The use of laser to levitate and release particles provides a novel approach for measuring and analyzing thermophorestic force, and also presents a novel manipulation tool for controlling and transporting particles in a gaseous medium.

Results of experimental simulation of interaction between corium of a nuclear reactor and sacrificial material (Al&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt;) with a lead layer

&lt;abstract&gt; &lt;p&gt;This paper presents the results of an experimental study of the interaction of a candidate sacrificial material (SM) for a light water reactor melt trap with corium at the Lava-B test-bench. The candidate sacrificial material is a combination of aluminum oxide and a lead layer. The idea of using such a combination of SM is based on the fact that when the lead layer interacts with corium, there will be an increase in the intensity of heat removal from the corium, as well as the chemical interaction between the corium and SM due to the high heat-conducting properties of lead. This approach will improve the efficiency of corium localization in the melt trap compared to the current set of sacrificial material. Experiments have shown active melting and boiling of lead during its interaction with corium. This is confirmed both by the readings of thermocouples and by the X-ray diffraction phase analysis of the deposit material formed on the walls of the melt receiver (MR) of the Lava-B bench, sampled after the experiment. The experiment results show that the lead layer reduces the rate of increase in the temperature of the corium and increases the rate of erosion of the ceramic part of the SM. With these circumstances, it is possible to conclude that the use of aluminum oxide with a lead layer is promising in practice.&lt;/p&gt; &lt;/abstract&gt;

Preparation of Bose-Einstein condensate of dysprosium atoms based on demagnetization cooling

In magnetic atomic gases, the dipolar relaxation process couples the system spin and kinetic degrees of freedom. When the average kinetic energy is significantly lower than the Zeeman splitting, the atoms predominantly occupy the lowest Zeeman state. As the Zeeman splitting approaches the average kinetic energy, some atoms transfer to adjacent Zeeman states through dipolar relaxation, converting kinetic energy into Zeeman energy. By utilizing optical pumping, atoms transferred to higher spin states can be repumped to the ground state, thereby achieving a continuous cooling cycle and effectively lowering the system’s temperature. As the energy removed in a single cooling cycle is much larger than the energy of scattered photons, this demagnetization cooling scheme significantly enhances cooling effciency and reduces atomic loss. In this work, we establish state-coupled equations that incorporate dipolar relaxation and optical pumping to analyze the demagnetization cooling process, modeling the evolution of atom number and temperature during the cooling of &lt;inline-formula&gt;&lt;tex-math id="M1"&gt;\begin{document}$^{164}{\text{Dy}}$\end{document}&lt;/tex-math&gt;&lt;/inline-formula&gt; atoms. We develop a strategy to generate an optimal magnetic field waveform by maximizing the demagnetization rate. Based on this strategy, we investigate the influence of crucial experimental parameters on demagnetization cooling and determine their specific ranges for producing large atom number of BEC, including the optical dipole trap frequency, as well as the intensity and polarization purity of the optical pumping light. The results indicate that demagnetization cooling enables the direct preparation of a large number of dysprosium BEC with sub-second timescales, reducing the cooling time by an order of magnitude compared to conventional methods for dysprosium atoms. Furthermore, it could achieve a cooling effciency of &lt;inline-formula&gt;&lt;tex-math id="M2"&gt;\begin{document}$\chi \approx 44.92$\end{document}&lt;/tex-math&gt;&lt;/inline-formula&gt;, an order of magnitude higher than that of traditional evaporative cooling.

Exploring the Utility of Light Traps for Early Detection and Management of Rice Insect Pests

Exploring the Utility of Light Traps for Early Detection and Management of Rice Insect Pests