Light Response Research Articles

Environmentally Friendly, Dual-Responsive Actuator Based on Nafion, Carboxylated Multiwalled Carbon Nanotubes, and Polyethylene.

As a type of smart material, flexible stimulus-responsive actuators have become a hot research topic nowadays. However, flexible actuators responding to a single stimulus source are susceptible to external perturbations, which may lead to an unstable function or even failure. Therefore, in this paper, we proposed a bilayer actuator that can be driven by both humidity and light by combining the humidity-sensitive Nafion, carboxylated multiwalled carbon nanotubes (cMWCNT) with excellent photothermal conversion properties, and commercial polyethylene (PE) tape with good humidity insensitivity and thermal expansion. First, the cMWCNT-Nafion film was prepared by a solution casting method and bonded together with PE tape to obtain a bilayer actuator. Then, the effects of the cMWCNT mass fraction and film thickness on the humidity and light response performance of the bilayer actuator were investigated. The optimal ratios of raw materials were obtained for different stimulation sources, respectively. Furthermore, the performance of the bilayer actuator with the optimal ratios was tested; it was verified that the proposed dual-responsive actuator can realize different degrees of bending deformation under different relative humidity (RH) and ultraviolet (UV) light intensity with good stability. Finally, the application potential in multiple scenarios was further verified by applying the prepared cMWCNT-Nafion/PE bilayer actuator to a smart window, crawling robot, and flexible gripper. This paper will provide a meaningful reference for the development and performance optimization of high-performance dual-responsive actuators.

Transparent Photochromic Coatings for Smart Windows and Information Storage

AbstractOrganic–inorganic composite photochromic coatings receive significant attention in energy utilization and conservation due to their easy application and rapid photoresponse. However, their high sensitivity to moisture limits practical applications. This study fabricates organic–inorganic composite functional coatings using a simple one‐pot method, producing materials with excellent photoresponsive, water resistance, and thermal insulation. Unmodified phosphotungstic acid serves as the inorganic photochromic filler, while methacrylate derivatives act as the polymer matrix, resulting in coatings with high initial transparency (over 85%). After 5 min of UV exposure, the samples shift to nearly non‐transmittable states in the visible range and maintain color depth through 14 coloring‐erasing cycles. Unlike polyvinylpyrrolidone substrates, which absorb moisture and soften quickly, this coating has a static water contact angle of up to 91.7°, showing excellent water resistance. Additionally, the composite material provides effective heat insulation in simulated chamber experiments, lowering the temperature by 15 °C compared to untreated chambers. In summary, this composite coating, with its excellent thermal insulation, rapid light responsiveness, stable cycling performance, and outstanding waterproof capabilities, proves highly suitable for applications such as smart windows, information storage, and building energy efficiency.

Transcriptomic dynamics of ABA response in Brassica napus guard cells

Drought has a significant, negative impact on crop production; and these effects are poised to increase with climate change. Plants acclimate to drought and water stress through diverse physiological responses, primarily mediated by the hormone abscisic acid (ABA). Because plants lose the majority of their water through stomatal pores on aerial surfaces of plants, stomatal closure is one of the rapid responses mediated by ABA to reduce transpirational water loss. The dynamic changes in the transcriptome of stomatal guard cells in response to ABA have been investigated in the model plant Arabidopsis thaliana. However, guard cell transcriptomes have not been analyzed in agronomically valuable crops such as a major oilseed crop, rapeseed. In this study, we investigated the dynamics of ABA-regulated transcriptomes in stomatal guard cells of Brassica napus and conducted comparison analysis with the transcriptomes of A. thaliana. We discovered changes in gene expression indicating alterations in a host of physiological processes, including stomatal movement, metabolic reprogramming, and light responses. Our results suggest the existence of both immediate and delayed responses to ABA in Brassica guard cells. Furthermore, the transcription factors and regulatory networks mediating these responses are compared to those identified in Arabidopsis. Our results imply the continuing evolution of ABA responses in Brassica since its divergence from a common ancestor, involving both protein-coding and non-coding nucleotide sequences. Together, our results will provide a basis for developing strategies for molecular manipulation of drought tolerance in crop plants.

Comparison of four light-response models using relative curvature measures of nonlinearity

Photosynthetic light response curves serve as powerful mathematical tools for quantitatively describing the rate of photosynthesis of plants in response to changes in irradiance. However, in practical applications, the daunting task of selecting an appropriate nonlinear model to accurately fit these curves persists as a significant challenge. Thus, there arises a need for a method to systematically evaluate the efficacy of such models. In the present study, four distinct nonlinear models, namely Exponential Model (EM), Rectangular Hyperbola Model (RHM), Nonrectangular Hyperbola Model (NHM), and Modified Rectangular Hyperbola Model (MRHM), were used to fit the relationship between light intensity and the rate of photosynthesis across 42 empirical datasets. The goodness of fit for each model was assessed using the root-mean-square error, and relative curvature measures of nonlinearity were employed to assess the nonlinear behavior of the models. In terms of goodness of fit, pairwise difference tests of the root-mean-square error revealed that there was little to choose among the four models, although RHM gave a marginally poorer fit. However, in terms of nonlinear behavior, EM not only provided the most favorable linear approximation performance at the global level, but also exhibited the best close-to-linear behavior at the individual parameter level among the four models across the 42 datasets. Consequently, the results strongly advocate for EM as the most suitable mathematical framework for fitting photosynthetic light response curves. These findings provide insights into the model assessment for nonlinear regression in describing the relationship between the photosynthetic rate and light intensity.

PavSPLs are key regulators of growth, development, and stress response in sweet cherry

SQUAMOSA PROMOTER BINDING PROTEIN-LIKE (SPL) genes are plant-specific transcription factors essential for plant growth, development, and stress responses. Their roles in sweet cherry are not well understood. In this study, we identified and isolated 16 SPL genes from the sweet cherry genome, categorizing them into 5 subfamilies, with 12 PavSPLs predicted as miR156 targets. Promoter regions of PavSPLs contain cis-elements associated with light, stress, and phytohormone responses, indicating their role in biological processes and abiotic stress responses. Seasonal expression analysis showed that PavSPL regulates sweet cherry recovery after dormancy. Gibberellin (GA) treatment reduced PavSPL expression, indicating its role in GA-mediated processes. PavSPL14 overexpression in Arabidopsis thaliana resulted in earlier flowering and increased plant height and growth. Yeast two-hybrid assays showed an interaction between PavSPL14 and DELLA protein PavDWARF8, suggesting PavSPL14 and PavDWARF8 co-regulate growth and development. These findings lay the groundwork for further research on PavSPL function in sweet cherry.

Rapid Analysis for α-Tocopherol and Its Oxidative Products in the Pisum sativum L. Leaf Using Supercritical Fluid Chromatography-Medium Vacuum Chemical Ionization Tandem Mass Spectrometry.

A method for the rapid determination of α-tocopherol (α-T) and its oxidative products in plant tissue has been developed using supercritical fluid extraction (SFE) coupled with supercritical fluid chromatography (SFC) and medium vacuum chemical ionization (MVCI) with tandem mass spectrometry. The method is designed to study changes in levels for α-T and its oxidative products in plant cells during photosynthesis, aiming to observe the light response curves. α-T oxidation is a non-enzymatic self-defense mechanism in plant cells. Unlike enzyme-involved reactions, it cannot be stopped, so the oxidation continues in crude extracts even after extraction. Therefore, a real-time in-situ method is essential for tracking the light response curves. To optimize the selective reaction monitoring method, the reaction mixture of α-T and singlet oxygen (1O2), generated by rose Bengal under light illumination, was used as the source of oxidative products. The relative abundance changes in α-tocopherylquinone and 8a-hydroperoxy tocopherone in Pisum sativum L. (Pea) leaves under excessive light illumination have been preliminarily analyzed as part of the light response curve study. The method archives a throughput of 10-15 minutes for analyzing duplicate leaf samples. This process includes cutting off the leaf, sectioning it, placing the sample in a frozen SFE vessel, and conducting SFE/SFC analysis. Consequently, the average throughput is approximately 5-7 minutes per sample.

Enhancing dye-sensitized solar cells efficiency through organic dyes-sensitized holmium-doped TiO2/SnO2 nanocomposites blended with P3HT

The pursuit of sustainable energy solutions has spurred innovation in photovoltaic technology, with dye-sensitized solar cells (DSSCs) emerging as promising contenders. This study presents a novel approach leveraging holmium-doped TiO2/SnO2 nanocomposites sensitized with organic dyes, Arsenazo-III, carminic acid, and dithizone, blended with poly (3-hexylthiophene) (P3HT). Through meticulous characterization and analysis, key parameters including short-circuit current density (Jsc), open-circuit voltage (Voc), fill factor (FF), and overall percent efficiency (%) were scrutinized to evaluate photovoltaic performance comprehensively. Absorption spectra analysis facilitated the calculation of band gaps, revealing a significant reduction from 3.10 eV in pure Titania (TiO2) nanoparticles to 2.72 eV upon doping with Holmium and coupling with SnO2. Notably, Arsenazo-III dye-sensitized holmium-doped TiO2/SnO2 nanocomposites exhibited highest power conversion efficiency, achieving a promising efficiency of 2.10 %, which marked a significant improvement over the reference device (0.82 %). This improvement is attributed to the synergistic effects of holmium dopant incorporation and SnO2 interaction, enhancing light responsiveness. The findings not only validate the efficacy of nanohybrid assemblies but also contribute valuable insights to solar cell technology advancement.

Dynamic nonlocal metasurface for multifunctional integration via phase-change materials

Abstract Non-local metasurface supporting geometric phases at bound states in the continuum (BIC) simultaneously enables sharp spectral resonances and spatial wavefront shaping, thus providing a diversified optical platform for multifunctional devices. However, a static nonlocal metasurface cannot manipulate multiple degrees of freedom (DOFs), making it difficult to achieve multifunctional integration and be applied in different scenarios. Here, we presented and demonstrated phase-change non-local metasurfaces that can realize dynamic manipulation of multiple DOFs including resonant frequency, Q values, band, and spatial wavefront. Accordingly, a metasurface integrating multiple distinct functions is designed, as a proof-of-concept demonstration. Utilizing the geometry phase of quasi-BIC and the tunability of vanadium dioxide (VO2), a dynamic meta-lens is achieved by tailoring spatial light response at quasi-BIC in the temperature range from room temperature to 53 °C. Simultaneously, the sharp Fano resonance of quasi-BIC enables the metasurface to serve as an optical sensor in the mid-infrared band, yielding a sensitivity of 7.96 THz/RIU at room temperature. Furthermore, at the metallic state of VO2 (80 °C), the designed metasurface converts into a mid-infrared broadband absorber, achieving higher than 80 % absorptivity and an average absorption of 90 % from 28.62 THz to 37.56 THz. The proposed metasurface enabling multifunctional performances in different temperatures can effectively improve the availability of devices and find more new and complex scenarios in sensing, imaging, and communications.

2D Material Sensors with Light Excitation

Abstract2D materials are highly regarded for their exceptional sensing application prospects, stemming from their distinctive atomic layer structure and exceptionally sensitive surfaces. Over the past decade, numerous high‐performance 2D material sensors are extensively developed; however, challenges related to sensitivity, selectivity, and stability continue to impede their industrial advancement. The interaction between light and 2D materials has introduced unique properties, including absorption and emission characteristics, photoelectric effects, nonlinear optical effects, surface‐enhanced Raman scattering, and light response enhancement. Consequently, exciting and adjusting the electronic structure and carrier concentration of 2D materials through light with specific wavelength ranges is an effective strategy for enhancing sensing performance. This strategy has yielded remarkable breakthroughs in applications such as photodetectors, semiconductor gas sensors, and fiber optic sensors. Moreover, it demonstrates extraordinary potential in emerging applications such as image sensors, flexible electronics, and biomedical sensors. However, the sensing mechanism, device structure design, and specific applications of 2D materials under light excitation remain unclear. This perspective endeavors to elucidate the intrinsic photophysical mechanisms between light‐excited 2D materials and their target sensing analytes. Furthermore, it aims to explain the evolutionary pattern of sensing applications and provide novel insights and inspiration to advance this burgeoning field.

Genome-Wide Identification and Role of the bHLH Gene Family in Dendrocalamus latiflorus Flowering Regulation.

The basic helix-loop-helix (bHLH) gene family is a crucial regulator in plants, orchestrating various developmental processes, particularly flower formation, and mediating responses to hormonal signals. The molecular mechanism of bamboo flowering regulation remains unresolved, limiting bamboo breeding efforts. In this study, we identified 309 bHLH genes and divided them into 23 subfamilies. Structural analysis revealed that proteins in specific DlbHLH subfamilies are highly conserved. Collinearity analysis indicates that the amplification of the DlbHLH gene family primarily occurs through segmental duplications. The structural diversity of these duplicated genes may account for their functional variability. Many DlbHLHs are expressed during flower development, indicating the bHLH gene's significant role in this process. In the promoter region of DlbHLHs, different homeopathic elements involved in light response and hormone response co-exist, indicating that DlbHLHs are related to the regulation of the flower development of D. latiflorus.

Lensless Mueller holographic microscopy with robust noise reduction for multiplane polarization imaging

Lensless holographic microscopy has emerged as a powerful and cost-effective tool for computational imaging, offering high resolution over a large field of view, beneficial for various biological applications. However, conventional approaches can struggle with contrast and accurate visualization of diverse components over the samples, which can directly affect the diagnostic precision of the techniques. Mueller imaging, while offering detailed, stain-free observations of polarized light responses in samples, often has a limited field of view and single plane information. This is due to the use of high NA microscope objectives and generally complex hardware setups, thus narrowing its practical effectiveness. This work introduces a Lensless Mueller Holographic Microscopy (LMHM) system that overcomes these limitations, enabling large field of view, volumetric multi-layer imaging, and Mueller matrix computation using in-line lens-free holography setup. The proposed system provides precision visualization of polarization information in samples, offering high-quality features due to the incorporation of a numerical multi-height Gerchberg-Saxton reconstruction algorithm with additional complex field filtering and a physical rotating diffuser. The proposed LMHM framework is validated with a calibrated USAF 1951 birefringent test target. A multiplane sample containing cloth fiber is utilized to study the LMHM capabilities of imaging volumetric samples. Finally, the LMHM is used to analyze two mice’s brain slices, effectively showcasing this organ’s anatomy. Among other structures in the brain, the proposed method easily allows the visualization of, e.g., the corpus callosum. These results constitute a proof-of-concept evaluation for bioimaging applications.

Attenuated melanopsin-mediated post-illumination pupillary response (PIPR) is associated with reduced actigraphic amplitude and mesor in older adults.

This study aimed to explore the relationship between post-illumination pupillary response (PIPR) with sleep and circadian measures in a community sample of healthy older adults. Eligible participants were invited to complete a one-week sleep diary, actigraphy and provide an overnight urine sample to measure urinary 6-sulfatoxymelatonin (aMT6s). PIPR was defined as the as the pupil constriction at 6s post-stimulus (PIPR-6s), and ii) for 30s beginning 10s after stimulus (PIPR-30s) normalized as a percentage to the baseline pupil diameter, after 1s of blue and 1s of red-light stimulus, respectively. The Net-PIPRs were reported by subtracting the PIPR to red stimulus from the PIPR to blue stimulus. The relationship between PIPR metrics to aMT6s and actigraphic rest-activity rhythm parameters was examined by generalized linear models. A total of 48 participants were recruited (Mean age: 62.6 ± 7.1 years, Male: 44%). Both Net PIPR-6s and Net PIPR-30s were significantly associated with actigraphic rest-activity amplitude (B=0.03, p=0.001 and B=0.03, p=0.01, respectively), and actigraphic rest-activity mesor (B=0.02, p=0.001 and B=0.03, p=0.004, respectively). Additionally, the Net PIPR-30s were positively associated with overnight aMT6s level (B=0.04, p=0.03), and negatively associated with actigraphic rest-activity acrophase (B=-0.01, p=0.004) in the fully adjusted models. Attenuated PIPR is associated with a reduced actigraphic amplitude and mesor. The reduced retinal light responsivity may be a potential pathway contributing to impaired photic input to the circadian clock and resulted in the age-related circadian changes in older adults.

Host-Graft Synapses Form Functional Microstructures and Shape the Host Light Responses After Stem Cell-Derived Retinal Sheet Transplantation.

Retinitis pigmentosa represents a leading cause of blindness in developed countries, yet effective treatments for the disease remain unestablished. Previous studies have demonstrated the potential of stem cell-derived retinal organoid (SC-RO) sheet transplantation to form host-graft synapses and to improve light responsiveness in animal models of retinal degeneration. However, the detailed microstructures of these de novo synapses and their functional contribution have not been well elucidated. This study aims to (1) elucidate the microstructures of the host-graft synapse, and (2) investigate the overall distribution and contribution of these synapses to host retinal light responses. We identified host-graft synapses using a reporter system in mouse SC-RO and rd1 mice, a well-established model of end-stage retinal degeneration. Correlative array tomography was used to reveal the microstructure of host-graft synapses. Furthermore, we developed a semi-automated algorithm that robustly detects the host-graft photoreceptor synapses in the overall grafted area using the same reporter system in flat-mount retinas. We then integrated the spatial distribution of the host-graft synapses with light responses detected by multi-electrode array recording. Correlative array tomography revealed that host-graft synapses recapitulate the developmental process of photoreceptor synapse formation involving horizontal cells first and then rod bipolar cells. By integrating the spatial distribution of host-graft synapse and multi-electrode array recording, we showed that the number of light-responsive host retinal ganglion cells is positively correlated with the local density of host-graft synapses. De novo host-graft synapses recapitulate the developmental microstructure of the photoreceptor synapse, and their formation contributes to the light responsiveness after SC-RO transplantation.

Z-Schematic Water Splitting on Photocatalyst Sheets Composed of Transition-Metal-Doped Metal Oxides with Long Wavelength Visible Light Responses and a Conductive Polymer

Z-Schematic Water Splitting on Photocatalyst Sheets Composed of Transition-Metal-Doped Metal Oxides with Long Wavelength Visible Light Responses and a Conductive Polymer

Color Recognition Achieved in Multiwavelength Controlled Plasmonic Optoelectronic Memristor for Neuromorphic Visual System

AbstractAn optoelectronic synaptic device with the color‐recognition ability is highly desired for achieving the high‐efficient neuromorphic color visual system. In order to realistically implement the functionality of retina (i.e., bipolar cells and cones photoreceptors), the exploration of multiwavelength controlled optoelectronic synaptic devices with fully light tunable ability would be sorely needed. Here, a multiwavelength controlled plasmonic optoelectronic memristor based on the size‐dependent localized surface plasmon resonance (LSPR) of metallic nanostructures is developed. The distinguishable red (R), green (G), and blue (B) light response behaviors can be achieved in this single device, which enables the realization of color image perception and memory functions. The RGB light‐strengthened synaptic plasticity can be depressed by ultraviolet light stimulations, relying on the effects of LSPR and optical excitation in WOx:Ag nanocomposites. Moreover, the visual attention for color (color discrimination) is realized in this memristor, which promotes the improvement of recognition accuracy during the color image recognition process. A new approach in developing multiwavelength controlled synaptic devices is provided here for highly efficient neuromorphic vision.

Fabrication of efficient interface carrier channels on multidimensional O[sbnd]CQD Decorated CN Heterojunction for tetracycline degradation via peroxymonosulfate activation

Graphite carbon nitride (CN) is recognized as a promising non-metallic semiconductor photocatalyst for its excellent chemical stability and visible light response. However, the high electron-hole recombination rate in CN greatly limits its photocatalytic performance. To circumvent these limitations, it is particularly important to explore an efficient way to promote the migration of carriers in CN. This study innovatively designs a multidimensional heterojunction between organic carbon quantum (OCQD) and CN, which named as OCQD-CN. OCQD acts as an carriers transfer channel, which effectively promotes the separation efficiency of carriers. Meanwhile, the introduction of OCQD further improves light absorption scope as well as light reaction intensity of CN. By adding peroxymonosulfate (PMS) to form an advanced oxidation process, OCQD-CN10 exhibits a prominent tetracycline (TC) degradation capacity up to 89.1 % within 60 min. The photocatalytic degradation performance of OCQD-CN is significantly improved by 2.0 times with the addition of OCQD. The first-order rate constant corresponding of OCQD-CN10 (0.0300 min−1) is also 2.8 times higher than CN (0.0107 min−1). Thereby, this research underscores the potential of OCQD-CN/PMS system in mitigating water pollution and advancing eco-friendly technologies, offering a promising route to address antibiotic contaminants in the environment.

Light response of poly(ethylene 2,6-naphthalate) to neutrons

There is an increasing necessity for low background active materials as ton-scale, rare-event and cryogenic detectors are developed. Poly(ethylene-2,6-naphthalate) (PEN) has been considered for these applications because of its robust structural characteristics, and its scintillation light in the blue wavelength region. Radioluminescent properties of PEN have been measured to aid in the evaluation of this material. In this article we present a measurement of PEN’s quenching factor using three different neutron sources; neutrons emitted from spontaneous fission in 252Cf , neutrons generated from a DD generator, and neutrons emitted from the 13C(α,n)16O and the 7Li(p,n)7Be nuclear reactions. The fission source used time-of-flight to determine the neutron energy, and the neutron energy from the nuclear reactions was defined using thin targets and reaction kinematics. The Birks’ factor and scintillation efficiency were found to be kB = 0.12 ± 0.01 mm MeV−1 and S = 1.31 ± 0.09 MeVeeMeV−1 from a simultaneous analysis of the data obtained from the three different sources. With these parameters, it is possible to evaluate PEN as a viable material for large-scale, low background physics experiments.

Photoirradiation-enhanced behavior via morphological manipulation of CoFe2O4/g-C3N4 heterojunction for supercapacitor and CO2 reduction

Regulating the morphology of graphitic carbon nitride (g-C3N4, CN) and constructing CoFe2O4/g-C3N4 (CFO/CN) heterojunctions were adopted in the photocatalytic energy storage and photocatalytic CO2 reduction (PCR). CFO/CNS had outstanding light response ability, while CFO/CNT possessed excellent charge transfer ability. Consequently, CFO/CNT electrode exhibited the highest specific capacitance without light, CFO/CNS electrode showed the most obvious photo-enhanced capacitance behavior with an increase by 21.05 % under light. This was ascribed to the generation and separation of photo-generated carriers, promoting oxidation/reduction reactions. And in PCR, the electron consumption rates of four CFO/CN heterojunctions were CFO/CNT > CFO/BCN > CFO/MCN > CFO/CNS. CFO/CNT presented the highest photocatalytic activity, attributing to the strong redox ability and photo-enhanced electron transfer. This strategy of utilizing CFO/CN heterojunctions to construct photo-enhanced supercapacitor electrodes and photocatalytic CO2 reduction catalysts provided new ideas for energy conversion and storage.

Programmable light‐driven soft actuator enabled by structurally anisotropic liquid crystalline network

AbstractThe design and fabrication of advanced soft actuators with programmable actuation are highly desirable in constructing intelligent soft robots. In this work, a programmable light‐driven liquid crystalline network (LCN)‐based soft actuator was judiciously designed and prepared by constructing structural anisotropy across the thickness of the film. A three‐dimensional (3D) deformable LCN actuator was realized by polymerization‐induced phase separation of small‐molar‐weight monomers and polymer networks. The resultant anisotropic LCN displays anisotropic microscale nanoporous architecture across the thickness in addition to uniform alignment at the molecular scale. The actuation behaviors of LCN film are tunable by adjusting the size and distribution of nanopores in LCN bulk via changing polymerization conditions and monomer components. More importantly, the nanoporous LCN film can be harnessed as a promising template to achieve diverse light responsiveness by changing the photothermal dyes via a feasible washing and refilling process, demonstrating a reprogrammable light‐driven soft actuator.

Efficient Photocatalytic Degradation of Humic Acid in Water Using N‐Doped Ti3AlC2 MAX

AbstractHumic acid (HA) is the main precursor of carcinogenic compounds such as trichloromethane, which form during the disinfection of drinking water. Therefore, removing HA from water sources is crucial for producing safe drinking water. This study introduces a novel approach using dilute nitric acid as a nitrogen source to dope pristine Ti3AlC2 (TAC) to varying degrees, enhancing the material‘s photocatalytic degradation performance for HA. Characterisations through X‐ray diffraction, Fourier transform infrared, scanning electron microscopy, UV–vis and X‐ray photoelectron spectroscopy revealed that the surface morphology of the modified catalyst changed from an original blocky lamellar structure to a rod‐like cluster structure, which is advantageous for light trapping. In addition, the incorporation of nitrogen reduced the band gap of the material from 1.25 to 1.15 eV, considerably enhancing its overall light responsiveness and thereby improving its photocatalytic performance. The results demonstrated that the photocatalytic degradation efficiency of HA by TAC under optimal conditions reached 93.8 %, which is 4.3 times higher than the 21.8 % efficiency achieved using the undoped TAC material. The enhanced photocatalytic activity is attributed to N doping, which not only reduces the TiO2 band gap at the TAC surface but also improves the electrochemical behaviour of TAC. This results in enhanced light response and more efficient separation of photogenerated electron–hole pairs. The mechanism for CTAC–Nx photocatalytic degradation of HA was investigated using trapping agent experiments, revealing that the primary active substance responsible for the degradation is O2−.