Visible Light Range Research Articles

Defect-Engineered Tin Disulfide Nanocarriers as "Precision-Guided Projectile" for Intensive Synergistic Therapy.

Nanoformulations with endogenous/exogenous stimulus-responsive characteristics show great potential in tumor cell elimination with minimal adverse effects and high precision. Herein, an intelligent nanotheranostic platform (denoted as TPZ@Cu-SnS2-x /PLL) for tumor microenvironment (TME) and near-infrared light (NIR) activated tumor-specific therapy is constructed. Copper (Cu) doping and the resulting sulfur vacancies can not only improve the response range of visible light but also improve the separation efficiency of photogenerated carriers and increase the carrier density, resulting in the ideal photothermal and photodynamic performance. Density functional theory calculations revealed that the introduction of Cu and resulting sulfur vacancies can induce electron redistribution, achieving favorable photogenerated electrons. After entering cells through endocytosis, the TPZ@Cu-SnS2-x /PLL nanocomposites show the pH responsivity property for the release of the TPZ selectively within the acidic TME, and the released Cu2+ can first interact with local glutathione (GSH) to deplete GSH with the production of Cu+ . Subsequently, the Cu+ -mediated Fenton-like reaction can decompose localhydrogen peroxide into hydroxyl radicals, which can also be promoted by hyperthermia derived from the photothermal effect for tumor cell apoptosis. The integration of photoacoustic/computed tomography imaging-guided NIR phototherapy, TPZ-induced chemotherapy, and GSH-elimination/hyperthermia enhanced chemodynamic therapy results in synergistic therapeutic outcomes without obvious systemic toxicity in vivo.

Development of Sustainable and Active Food Packaging Materials Composed by Chitosan, Polyvinyl Alcohol and Quercetin Functionalized Layered Clay.

In order to solve the problems of insufficient active functions (antibacterial and antioxidant activities) and the poor degradability of traditional plastic packaging materials, biodegradable chitosan (CS)/polyvinyl alcohol (PVA) nanocomposite active films reinforced with natural plant polyphenol-quercetin functionalized layered clay nanosheets (QUE-LDHs) were prepared by a solution casting method. In this study, QUE-LDHs realizes a combination of the active functions of QUE and the enhancement effect of LDHs nanosheets through the deposition and complexation of QUE and copper ions on the LDHs. Infrared and thermal analysis results revealed that there was a strong interface interaction between QUE-LDHs and CS/PVA matrix, resulting in the limited movement of PVA molecules and the increase in glass transition temperature and melting temperature. With the addition of QUE-LDHs, the active films showed excellent UV barrier, antibacterial, antioxidant properties and tensile strength, and still had certain transparency in the range of visible light. As QUE-LDHs content was 3 wt%, the active films exhibited a maximum tensile strength of 58.9 MPa, representing a significant increase of 40.9% compared with CS/PVA matrix. Notably, the UV barrier (280 nm), antibacterial (E. coli) and antioxidant activities (DPPH method) of the active films achieved 100.0%, 95.5% and 58.9%, respectively. Therefore, CS/PVA matrix reinforced with QUE-LDHs has good potential to act as an environmentally and friendly active packaging film or coating.

Synthesis of novel Ag/AgBr/K0.4Y0.7Sb2O6.25 nanocomposite with enhanced photocatalytic properties

Devoloping efficient wastewater treatment photocatalysts capable of improving water quality is undoubtedly one of the main problems of present society. In recent years, novel plasmonic photocatalysts have shown new possible applications in photocatalytic wastewater treatment due to their unique properties. In this work, a novel Ag/AgBr/K0.4Y0.7Sb2O6.25 composite was successfully fabricated by photo-reduction using the pre-prepared AgBr/K0.4Y0.7Sb2O6.25 and K0.4Y0.7Sb2O6.25 (KYSbO). The AgBr/KYSbO and KYSbO were synthesized by deposition-precipitation and precipitation-heating methods. The visible-light photocatalytic performance of parent KYSbO and Ag/AgBr/KYSbO composite was evaluated using methylene blue (MB) as a model organic pollutant. The effects of catalyst dosage, pH and the initial concentration of the MB dye solution on the photocatalytic activity were also investigated in this study. Remarkably, the Ag/AgBr/KYSbO composite exhibited superior visible-light photocatalytic activity for the degradation of MB than that of parent KYSbO. MB was degraded to 91.6% in the presence of parent KYSbO after visible irradiation of 180 min, while 93.2% degraded in merely 30 min in the case of Ag/AgBr/KYSbO composite. The superior improvement in the photocatalytic activity of the Ag/AgBr/KYSbO composite can be credited to the efficient separation of photoinduced electron-hole pairs and the extended visible-light response range. Superoxide radicals are crucial for MB photocatalytic degradation in the Ag/AgBr/KYSbO composite. The possible photocatalytic mechanism was proposed.

S-C3N6 monolayer by atomic doping serving as solar cells and photocatalyst

Atomic doping is an effective method to adjust the electronic and optical properties of s-C3N6. Herein, we studied the effects of atomic doping (S, Cl, Na and Mg) on the electronic, optical and redox properties of s-C3N6 monolayer by first-principles calculations. We consider the substitutional doping of non-equivalent C or N atoms and interstitial doping at the hole position. The results show that atomic doping can effectively adjust the band gap of s-C3N6 (2.59 eV) monolayer. Most notably, we found that S(Nl)-s-C3N6 is a quasi-direct band gap semiconductor with a band gap of 1.27 eV and the theoretical photovoltaic efficiency of S(Nl)-s-C3N6 is 31.84%, which indicates it has the potential to be used in thin-film solar cells. In addition, Cl6@s-C3N6 meets the conditions of photocatalytic water splitting at pH = 7, and the Mg6@s-C3N6 monolayer appears the reduction ability. Meanwhile, the atomic doped s-C3N6 monolayer enhances the absorption intensity in the visible light range. The emergence of redox capacity and the enhancement of the absorption coefficient in carbon nitride monolayer via atomic doping reveals an exciting material platform for designing novel photovoltaic cells and nanoelectronics devices.

Theoretical studies on phase stability, electronic, optical, mechanical and thermal properties of chalcopyrite semiconductors HgXN2 (X=Si, Ge and sn): A comprehensive DFT analysis

In this study, the ground state physical properties of Hg-based chalcopyrite semiconductors, HgXN2 (X = Si, Ge and Sn), are investigated using the density functional theory (DFT), which is based on full potential linearized augmented plane wave (FP-LAPW) method. The structural, electronic, optical, mechanical and thermal properties of the body-centered tetragonal (BTC) phase, HgXN2 (X = Si, Ge and Sn), have been calculated using the modified Becke-Johnson exchange-correlation potential (TB-mBJ). The obtained lattice parameters and volume are in good agreement with the values reported earlier, indicating that the results are reliable and reproducible. The phase stability of the titled compounds is elaborately studied and it is confirmed that all are thermodynamically, dynamically and mechanically stable. The electronic band structure demonstrated a direct band gap of 1.70 eV, 0.99 eV, and 0.94 eV for the HgXN2 (X = Si, Ge and Sn) compounds, respectively. Both HgGeN2 and HgSnN2 compounds have a notably lighter carrier effective mass, resulting in higher carrier mobility and conductivity than HgSiN2. The order of the mechanical hardness is as follows: HgSiN2> HgGeN2> HgSnN2. The studied materials are also anisotropic in mechanically and optically. All the title compounds exhibit ductile behavior. The charge density contour plots indicates the dominant covalent nature of the bonds in HgXN2 (X = Si, Ge and Sn). All these compounds have a high absorption coefficient and low optical reflectivity in the visible light range. Due to the favorable band gap and high absorption coefficient, these compounds could be suitable for optoelectronic or photovoltaic device applications. Moreover, the thermal expansion coefficient, thermal conductivity, melting point and fracture toughness behavior have been calculated, which also showed promise for thermal barrier coating (TBC) applications.

Multifunctional metalens optical tweezers for optical information recognition.

Traditional optical information recognition (OIR), particle capture and manipulation require many optical devices or mechanical moving system components to achieve a specific function, which is difficult to achieve integration. This paper proposes a new method to realize these functions by using multi-focus metalens combining spectrum and polarization selection. The design incorporates three spectral bands, namely 500 nm, 580 nm, and 660 nm, within the visible light range. Additionally, it utilizes either left-handed or right-handed circularly polarized (LCP/RCP) light, resulting in six distinct focus focusing effects on a single focal plane. By analyzing the normalized light intensity (NLI) at the corresponding focus position, the OIR of any wavelength and polarization detection in the design can be realized, and the particle capture at different focusing positions can be realized. Our work can provide a new idea for the high integration of on-chip light recognition and operation and inspire the design of a highly integrated optical system with a smaller size and more substantial function.

Smart chiral liquid crystal elastomers: Design, properties and application

AbstractSmart chiral liquid crystal elastomers are a class of soft photonic crystals with periodic nanostructures. There are two kinds of chiral liquid crystal elastomers with structural colors: cholesteric liquid crystal elastomers with a one‐dimensional helical nanostructure and blue‐phase liquid crystal elastomers with a three‐dimensional photonic crystal nanostructure. The self‐assembled nanostructure of chiral liquid crystal elastomers can be dynamically controlled under external stimulation, and the reflected color can be adjusted throughout the visible light range. Along with the development of innovative material systems and cutting‐edge manufacturing technologies, researchers have proposed diverse strategies to design and synthesize chiral liquid crystal elastomers and have thoroughly investigated their properties and potential applications. Here, we provide a systematic review of the progress in the design and fabrication of smart chiral liquid crystal elastomers, focusing on the cholesteric liquid crystal elastomers via surface‐enforced alignment, bar coating, 3D printing, anisotropic deswelling methods as well as the three‐dimensional self‐assembly of blue‐phase liquid crystal elastomers without additional alignment. Smart chiral liquid crystal elastomers are able to respond quickly to external stimuli and have a wide range of applications in areas such as adaptive optics, color‐changing camouflage, soft robotics, and information encryption. This review concludes with a perspective on the opportunities and challenges for the future development of smart chiral liquid crystal elastomers.

Enhanced photocatalytic properties of s-triazine-based-g-C3N4/BlueP and g-C3N4/G/BlueP vdW heterostructures: A DFT study

Constructing a Z-scheme heterostructure from selected semiconductors has been proved to be an effective route for attaining the strong redox capability and broad light absorption range simultaneously. In this work, we investigated the electronic, optical and photocatalytic properties of g-C3N4/BlueP and g-C3N4/G/BlueP van der waals heterostructures (vdWHs) by density functional theory (DFT) calculations. The staggered band alignment and the interfacial built-in electric field originated from the charge transfer from g-C3N4 to BlueP depict the Z-scheme photocatalytic mechanism of the g-C3N4/BlueP vdWH. Meanwhile, the vdWH shows an enhanced absorbance at the ultraviolet and visible light range compared to the individual g-C3N4 and BlueP monolayers. Furthermore, the intercalation of Graphene monolayer between g-C3N4 and BlueP is proved to modulate the interfacial built-in electric field, while retaining the staggered band alignment simultaneously. The significant enhancement of the visible light region absorption efficiency promoted by the gap-state of intercalated Graphene manifests the co-catalytic effect of Graphene and the applicable prospect of the constructed ternary heterostructure in photocatalysis area.

Two-Dimensional SiH/g-C3N4 van der Waals Type-II Heterojunction Photocatalyst: A New Effective and Promising Photocatalytic Material

The two-dimensional layered heterostructure have been demonstrated as an effective method for achieving efficient photocatalytic hydrogen production. In this work, we propose, for the first time, the creation of van der Waals heterostructures from monolayers of SiH and g-C3N4 using first-principle calculations. We also systematically investigated additional properties for the first time, such as the electronic structure and optical behavior of van der Waals heterostructures composed of SiH and g-C3N4 monolayers. The results of this study show that the SiH/g-C3N4 heterostructure is categorized as a type-II heterostructure, which has a bandgap of 2.268 eV. Furthermore, the SiH/g-C3N4 heterostructure interface was observed to efficiently separate and transfer photogenerated charges, resulting in an enhanced photocatalytic redox performance. Moreover, the calculation of HOMO (Highest occupied molecular orbital) and LUMO (Least unoccupied molecular orbital) and charge density difference can further confirm that the SiH/g-C3N4 heterojunction is a type-II heterojunction, which has excellent photocatalytic hydrogen production and water decomposition performance. In addition, the SiH/g-C3N4 heterostructure exhibited excellent HER (Hydrogen evolution reaction) efficiency. This is essential for the process of photocatalytic water splitting. In SiH/g-C3N4 heterojunctions, the redox potential required for water splitting is spanned by the band edge potential. Calculating the absorption spectra, it was discovered that the SiH/g-C3N4 heterostructure possesses outstanding optical properties within the visible-light range, implying its high efficiency in photocatalytic hydrogen production. This research provides a broader research direction for the investigation of novel efficient photocatalysts and offers effective theoretical guidance for future efficient photocatalysts.

Dual fluorescence induced thermally activated delayed fluorescence materials based on 2,4-Diphenylthieno[3,2-d]pyrimidine with an efficient single-molecular white electroluminescence

Dual fluorescence compounds exhibit a wide emission spectrum in visible-light range and show huge application prospect in white-light OLED (WOLED). However, few of them can realize the trade-off between high color purity of white-light emission and high emission efficiency. In this work, using sulfur atom-fused electron acceptor (A) unit 2,4-diphenylthieno[3,2-d]pyrimidine (TP) and planar electron donor (D) unit phenothiazine (PTZ), a series of novel dual fluorescence compounds with simple twisting D-A configuration were designed and synthesized, denoted as PTZ-2TP, PTZ-4TP and DPTZ-TP, respectively. Simultaneous dual fluorescence emission could be realized both solution and film state of the current system via optimizing polarization environment and doped concentration, which are attributed to the characteristic quasi-axial (QA) and quasi-equal (QE) conformations. Subsequently, these compounds were successfully applied in WOLED with high efficiency. DPTZ-TP as emitter endows the WOLED with the best device performance with greenish-white light emission, CIE coordinates of (0.33, 0.44) and high EQEmax of 11.87%, which is the highest records of such single compound systems.

Fast liquid-free patterning of SWCNT films for electronic and optical applications

The development of new approaches to assembling carbon nanotubes in next-level architecture organization is one of the key directions in Nanomaterials Science. Meanwhile, the recent advances in the so-called rational design of thin single-walled carbon nanotube (SWCNT) films promise a significant improvement in the performance of electronic and optical devices. In this study, we propose a fast, efficient, and green method for the fabrication of 2D patterned SWCNT structures. This technique is based on the selective area deposition of SWCNTs synthesized in the aerosol (floating catalyst) CVD process. Such a liquid-free and one-step process beneficially distinguishes from existing alternative methods based on lithography on the filter or post-treatment lithography on already synthesized continuous films. We demonstrate a 12-fold improvement in the performance of patterned mesh-shaped SWCNT films used as transparent electrodes when compared to the continuous film. As a result, the sheet resistance at an overall 90 % transparency in the visible light range value of 62 Ω/□ was achieved. Moreover, transferred onto elastomer, the mesh-shaped SWCNT films were efficiently applied as tunable diffraction gratings in the THz range. We believe the technique proposed extends the possibilities of the aerosol CVD process for utilization in various applications.

Chirality Induction and Memory of Pillar[4]arene[1]quinone Derivatives in Visible-Light Range.

Pillar[4]arene[1]quinone derivatives (PQXs) were synthesized by the oxidation of pillar[5]arenes, which exhibited notable charge transfer (CT) transitions at approximately 485 nm. Successful chiral resolution of two pairs of enantiomeric conformers was achieved. Despite reduced binding affinity, PQXs demonstrated slower racemization kinetics. Visible-light chiroptical induction with a significant dissymmetry factor was attained by complexing PQXs with a chiral guest. The induced enantiomeric excess could be maintained through competitive binding with an achiral guest, offering a promising strategy for chiral sensing and memory.

Tungsten Oxide Thin Films for Electrochromic Applications: Pulse Width‐Controlled Deposition by High‐Power Impulse Magnetron Sputtering

Tungsten oxide (WO3) thin films have been of prime interest among electrochromic materials because of their chemical stability, strong adherence to various substrates, and high coloration efficiency. High‐power impulse magnetron sputtering (HiPIMS) holds great potential in fabricating durable WO3‐based electrochromic layers. However, the tungsten target–plasma interactions in reactive‐HiPIMS deposition of WO3 and their role in modulating the electrochromic function of the resulting WO3 coatings are yet to be understood. Herein, by controlling the HiPIMS pulse length, the stoichiometry of tungsten oxide structures can be tuned to optimize the transparency and electrochromic function of the coatings. X‐ray photoelectron spectroscopy data shows that at pulse lengths shorter than 85 μs, the concentration of suboxide compounds is less than that of tungsten trioxide, while for pulse lengths longer than 100 μs, this balance is reversed. The average optical transparency of the coatings in the range of visible light is higher than 80%. The optical transmittance modulation (ΔT) of 38.1, 36.2, and 34.3% and coloration efficiency of 41.3, 38.4, and 35.9 cm2 C−1 are measured for the WOx samples deposited at pulse lengths of 70, 85, and 100 μs, respectively. Tuning the HiPIMS pulse characteristics is a simple strategy to deposit tungsten oxide films with tuned electrochromic properties for an array of applications, from smart windows to wearable displays.

Visible Meta-Displays for Anti-Counterfeiting with Printable Dielectric Metasurfaces.

Metasurfaces, 2D arrays of nanostructures, have gained significant attention in recent years due to their ability to manipulate light at the subwavelength scale. Their diverse applications range from advanced optical devices to sensing and imaging technologies. However, the mass production of dielectric metasurfaces with tailored properties for visible light has remained a challenge. Therefore, the demand for efficient and cost-effective fabrication methods for metasurfaces has driven the continuing development of various techniques. In this research article, a high-throughput production method is presented for multifunctional dielectric metasurfaces in the visible light range using one-step high-index TiO2-polymer composite (TPC) printing, which is a variant of nanoprinting lithography (NIL) for the direct replication of patterned multifunctional dielectric metasurfaces using a TPC material as the printing ink. The batch fabrication of dielectric metasurfaces is demonstrated with controlled geometry and excellent optical response, enabling high-performance light-matter interactions for potential applications of visiblemeta-displays.

DFT Investigation of Structural Stability, Optical Properties, and PCE for All-Inorganic Csx(Pb/Sn)yXz Halide Perovskites.

Employing all-inorganic perovskites as light harvesters has recently drawn increasing attention owing to the strong-bonded inorganic components in the crystal. To achieve the systematic and comprehensive understanding for the structures and properties of Csx(Pb/Sn)yXz (X = F, Cl, Br, I) perovskites, this work provides the comparison details about crystal structures, optical properties, electronic structures and power conversion efficiency (PCE) of 18 perovskites. The suitable band gaps are detected in CsSnCl3-Pm3̅m (0.96 eV), γ-CsPbI3-Pnma (1.75 eV), and CsPbBr3-Pm3̅m (1.78 eV), facilitating the conversion from absorbing photon energy to generating hole-electron pairs. γ-CsPbI3-Pnma and CsSnI3-P4/mbm show superior visible-absorption performance depending on their higher absorption coefficient (α); meanwhile, strong peaks can be observed in the real part (Re) of photoconductivity of CsPbBr3-Pbnm, γ-CsPbI3-Pnma, and CsSnI3-P4/mbm in the visible-light range, implying their better photoelectric conversion abilities. The perovskite/tungsten disulfide (WS2) heterojunctions are constructed to calculate the PCE. Although just the PCE result (14.43%) of CsSnI3-Pnma/WS2 is reluctantly competitive, the predictions of PCEs indicate that the PCE of PSCs (perovskite solar cells) can be improved by not only regulating the perovskite to upgrade its own performance but also designing the PSC structure reasonably including the selection of appropriate ETL/HTL (electron/hole transport layer), etc.

Performance Evaluation of a Multifunctional Road Marking Coating for Tunnels Based on Nano SiO2 and TiO2 Modifications

Multifunctional road marking coatings with the functions of high-temperature stability, degradation of exhaust gas, and self-cleaning are of great significance for the safe operation and environmental protection of tunnels. This article uses active acrylic resin and an organosilicon hydrophobic agent as the base material, selects expanded vermiculite and glass microspheres as insulation fillers, and uses ammonium polyphosphate, pentaerythritol, melamine, and aluminum hydroxide as high-thermal-stability systems to prepare a two-component road marking coating base material. Then, nano SiO2 and modified nano TiO2 are added as modifiers to prepare a multifunctional road marking coating for tunnels. The physical and chemical properties of multifunctional road marking coatings are evaluating based on laboratory tests including thermogravimetry and derivative thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, exhaust degradation, and contact angle tests. The results indicate that the developed multifunctional road marking coating effectively reduces the thermal conductivity of the carbon layer through physical changes in the flame retardant system and the heat resistance formed by the high breaking bond energy of nano SiO2 during the combustion process. It forms a ceramic-like structure of titanium pyrophosphate with nano TiO2 that is beneficial for improving flame retardancy without generating harmful volatile gases and has good flame retardant properties. N–V co-doping reduces the bandgap of TiO2, broadens the absorption range of visible light by nano TiO2, improves the catalytic efficiency of visible light, and achieves the degradation efficiency of the four harmful components NOx, HC, CO, and CO2 in automotive exhaust by 23.4%, 8.3%, 2.5%, and 2.9%, respectively. The solid–liquid phase separation in the multifunctional road marking coating in the tunnel causes the formation and accumulation of nano SiO2 and TiO2 particles on the coating surface, resulting in a microstructure similar to the “micro–nano micro-convex” on the lotus leaf surface and making a water droplet contact angle of 134.2° on the coating surface.

Facile Synthesis of a Novel AgIO3/CTF Heterojunction and Its Adsorption-Photocatalytic Performance with Organic Pollutants.

With the development of modern industry, the issue of water pollution has garnered increasing attention. Photocatalysis, as a novel green environmental technology that is resource-efficient, environmentally friendly, and highly promising, has found extensive applications in the field of organic pollutant treatment. However, common semiconductor materials exhibit either a relatively low photocatalytic efficiency in the visible light range or an inefficient separation of photogenerated charges, resulting in their limited ability to harness solar energy effectively. Consequently, the development of new photocatalysts has become a pivotal focus in current photocatalysis research to enhance solar energy utilization. This research provides a brief explanation of the photocatalytic mechanism of the AgIO3/CTF heterojunction photocatalyst. Due to the localized surface plasmon resonance (LSPR) effect, the Ag nanoparticles demonstrate significant absorption in the visible light region, playing a crucial role in the highly efficient photocatalytic reduction of organic pollutants.

Electron beam-induced white emission from iridium complexes-doped polymer dots

Radiation detection plays an important role in diverse applications, including medical imaging, security, and display technologies. Scintillators, materials that emit light upon exposure to radiation, have garnered significant attention due to their exceptional sensitivity. Previous research explored polymer dots (P-dots) doped with iridium complexes as nano-sized scintillators for radiation detection, but these were constrained to emitting specific colors like red, green, and blue, limiting their utility. Recently, there has been a breakthrough in the development of white light emitters stimulated by UV–visible light. These emitters exhibit a broad spectral range in the visible wavelength, enhancing contrast and simplifying detection by visible-light sensors. Consequently, the quest for white color scintillators in radiation detection has emerged as a promising avenue for enhancing scintillation efficiency. In this study, we present a novel approach by applying P-dots doped with two iridium complexes to create white light-emitting nano-sized scintillators. These scintillators offer a wider spectral coverage within the visible-light wavelength range. Under UV light (365 nm) excitation, our synthesized P-dots exhibited remarkable white light emission. Moreover, when excited by electron beam irradiation, we observed the clear emission close to white emission which is valuable for improving the detection of radiation.

Visible Light Activation of Gold Nanoparticles Embedded into Titanium Dioxide Surface in Electrospun Polymeric Coatings

This work reports the development of a functional photocatalytic coating based on a combination of polymeric electrospun fibres and nanoparticles that is intended to be activated in the visible light range. In this sense, the resulting fibres can act as an effective matrix for the incorporation of titanium dioxide (TiO2) particles, which are covered by gold nanoparticles (AuNPs), in the outer surface of the metal oxide precursor. In the first step of the process, the optical properties of the nanoparticles were determined by UV-Vis spectroscopy. The extension of the visible absorption can be associated to the localized surface plasmon resonance (LSPR) of the metallic AuNPs. In addition, the resultant particle size distribution and average particle diameter was evaluated by dynamic light scattering (DLS) measurements. Furthermore, the phase composition and porosity of the functional particle powder were analysed by an XRD and N2 adsorption test. In the second step, these synthesized particles have been successfully immobilized into a PAA + β-CD electrospun fibre matrix by using the two different deposition methods of dip-coating and solution-casting, respectively. The morphological characterization of the samples was implemented by means of scanning electron microscopy (SEM), showing uniform and homogeneous, free-beaded fibres with a random distribution of the synthesized particles deposited onto the electrospun fibres. Then, the functional coatings were removed from the substrate, and a thermogravimetric (TGA) analysis was carried out for each sample in order to obtain the precursor mass immobilized in the coating. Once the overall mass of precursor was obtained, the percentage of TiO2 particles and AuNPs in the precursor was calculated by using inductively coupled plasma atomic emission spectrometry (ICP-AES). Finally, the photocatalytic activity of both functional solution and electrospun coatings were evaluated in terms of a gradual degradation of rhodamine B (RhB) dye after continuous exposition to a visible-light lamp.

Assessment of Directional-Hemispherical Reflectance of Tablets with Cefuroxime during Storage under Elevated Temperature and Ultraviolet Radiation.

Environmental conditions can lead to changes in the physical and chemical structures of drug products. In this study, the stability of cefuroxime tablets stored under adverse conditions was evaluated based on total directional-hemispherical reflectance (THR). The THR value was measured before and after the tablets' exposure to stress factors (temperature of 45 °C and UV radiation). Each measurement was performed three times within seven spectral bands at the beginning of the experiment (day 0), and then on days 1, 2, 3, 5, and 7. In addition, hyperspectral profiles (400-1030 nm) were analyzed on days 0 and 7. A significant decrease in THR values in all wavelength ranges was observed when day 7 vs. day 0 were compared, especially for spectral bands of 335-380 nm and 1700-2500 nm (Δ = 0.220, p < 0.001 and Δ = 0.171, p < 0.001, respectively). The hyperspectral analysis confirmed a decrease in the reflectance after the end of stress conditions in the visible light range (400-700 nm) compared to tablets before the experiment. This may indicate that more radiation entered the tablets. In conclusion, the THR of cefuroxime tablets decreases during the exposure to heat and UV radiation, which may result from some physicochemical changes that have occurred during storage.