Light Absorption Research Articles

Templated Growth of In2S3 in Ti3C2TX MXene with Enhanced Photocatalytic Properties

The growth of ultrathin semiconductors is advantageous for photocatalysis due to improved photophysical properties and reduced charge recombination. Along these lines, templating the growth of semiconductors in confined spaces can allow control over semiconductor growth while also conferring the properties of the template to provide composite nanomaterial hybrids. Herein, the semiconductor In2S3 is grown in the organically‐modified interlayer space of Ti3C2TX MXene, a versatile 2D material with metallic character and broadband light absorption. The growth of 1–2 nm thick layers of In2S3 in the interlayer of MXene leads to a drastic increase in photocatalytic properties and light‐induced charge generation due to decreased interfacial charge transfer resistance. Interestingly, the hydrothermal conditions of In2S3 growth lead to partial oxidation of Ti3C2TX MXene to form anatase TiO2 nanocrystals, although this effect is strongly limited by increased In2S3 precursors due to passivation of the MXene surface. MXenes serve as effective templates for the confined growth of semiconductors, emphasizing the potential of MXene as a template for 2D material heterostructures. Overall, this work further develops MXene‐based 2D material composites, offering insights into the origins of the enhanced photocatalytic and photoelectrochemical properties, toward improvements in energy production and aqueous phase catalysis.

Enhancing light absorption of deep ultraviolet photodiodes through intelligent algorithm-guided design of resonant nano-optical structures

Abstract The surface of the deep ultraviolet (DUV) photodiodes requires an enhanced light absorption to improve wall-plug efficiency. The resonant Mie scatterer has a high optical mode density with a high refractive index all-dielectric resonant structure, which causes strong light coupling and improves forward scattering, providing a new perspective for efficient light absorption on the surface of the DUV photodiodes. In this work, a method is proposed for the design of nano-optical structures that is capable of supporting forward light scattering across the resonant bandwidth. This is achieved by utilizing intelligent algorithms in conjunction with Maxwell’s equations. The results show that the average light absorption coefficient of the optimized optical structure is improved to more than 96% with angle-independent and polarization-independent characteristics. Based on intelligent algorithms, a reverse design approach can be employed to maximize this effect, thereby offering novel avenues for enhancing the wall-plug efficiency of the DUV photodiodes.

Integration of TiO2/ZnIn2S4 p‐n Heterojunction with Titanium Defects to Boost PEC Oxygen Production

TiO2 is a widely used photoelectric conversion semiconductor material. However, due to its selective absorption of ultraviolet light and high recombination rate of photogenerated carriers, it exhibits poor photoelectrochemical water splitting performance. In this study, intrinsic defect titanium vacancy and semiconductor recombination agents ZnIn2S4 were introduced into an anodization‐annealed TiO2 film (TiO2 NT) to enhance the photoanode activity. The activity‐enhanced TiO2 photoanode (ZIS@TiO2 NT‐EA) was characterized by surface analyses and photoelectrochemical measurements. The results indicated that the introduction of titanium vacancies into the TiO2 NT‐EA changed its semiconductor type from n to p. After the ZnIn2S4 nanoparticles were loaded on the TiO2 NT‐EA film, the carrier concentration of the ZIS@TiO2 NT‐EA increased nearly 12 times than the pristine TiO2 NT. Due to the higher carrier separation efficiency resulting from the formation of p‐n heterojunction, the photocurrent density of the ZIS@TiO2 NT‐EA reached 3.89 mA cm‐2 at 1.23 V vs. RHE, nearly 3 times higher than that of the original TiO2 NT. The maximum applied bias photon‐to‐current efficiency (ABPE) value of the ZIS@TiO2 NT EA reached 2.15% at 0.496 V vs. RHE, which is very competitive if compared with all the reported TiO2 film electrodes in the PEC water splitting application.

Green sound-absorbing material prepared by using natural fiber for building acoustics

Natural fibers are recently seen as a replacement for synthetic fibers as core material to produce sound-absorbent materials. These are biodegradable and renewable, and using them as sound-absorbent material brings many environmental benefits as it is much greener compared to existing inorganic and synthetic fibers. Present exploration serves the purpose of investigation and comparison of the acoustic absorption characteristics of individual and mixed natural fibers; jute, coconut coir, and bamboo. Each fiber is reinforced with natural rubber in a certain weight ratio during the fabricating stage. The fibers are then compressed with the help of mould and ram piston in a hydraulic press. The compression is done in the form of cylindrical samples of 40 mm diameter. Each specimen is kept 36 mm thick, according to the given standards. The impedance tube technique is used to evaluate acoustical performances. Multilayered composites made of layers of coir, jute, and bamboo performed better in all the frequency ranges than composites made of individual fibers. Results establish that these fibers are promising and a viable option for light and environment-friendly sound absorption materials.

Temporal variability in the relationship between line height absorption and chlorophyll concentration: a case study from the Northern Gulf of Alaska

The Line Height Absorption (LHA) method uses absorption of light to estimate chlorophyll-a. While most users consider regional variability and apply corrections, the effect of temporal variability is typically not explored. The Northern Gulf of Alaska (NGA) was selected for this study because there was no published regional value and its large swings in temporal productivity would make it a good candidate to evaluate the effect of temporal variability on the relationship. The mean NGA value of 0.0114 obtained here should be treated with caution, as variation in the slope of the relationship (aLH*), and thus chlorophyll-a estimates, in the NGA region varied by ∼25% between spring (aLH* = 0.0109) and summer (aLH* = 0.0137). Results suggest that this change is driven by a shift in pigment packaging and cell size associated with changes in mixed layer depth and stratification. Consideration of how temporal variability may affect the accuracy of the LHA method in other regions is thus recommended.

Preparation and performance enhancement of MXene/Na2HPO4·12H2O@SiO2 phase change microcapsule

Currently, the leakage problem of phase change materials can be solved by the microencapsulation technology. Inorganic hydrated salt materials have the advantages of high latent heat density, high thermal conductivity and low cost. How to construct inorganic hydrated salt microcapsules with excellent heat storage capacity and photothermal conversion performance maintains a challenge. In this work, the MXene/Na2HPO4·12H2O@SiO2 (MXene/MPCMs) composite phase change microcapsules were designed and prepared. The Na2HPO4·12H2O was directly used as phase change material and TEOS was used as raw material to generate SiO2 wall material. The MXene played a key and important role in simultaneously enhancing their photothermal conversion efficiency while maintaining available latent heat. The prepared composite microcapsules (MPCM-1) showed more obvious heat storage and release characteristics, and the latent heat reached 169.62 J/g. Besides, when the hydrated salt was encapsulated in silica shell, the supercooling degree of hydrated salt was reduced from 14.2 °C to 10.1 °C. With the increase of MXene content, the maximum surface temperature of microcapsules significantly increased. Based on the results of surface temperature distribution, the photothermal conversion ability and heat transfer rate of microcapsules were effectively improved, which was mainly attributed to the remarkable light absorption conversion ability of MXene. When the MXene was added, the MXene/MPCMs still showed excellent heat storage properties (~ 156.64 J/g). At the same time, the MXene/MPCMs showed good chemical compatibility, crystallization characteristics and thermal stability. Considering available performance enhancement, the prepared microcapsules show good application prospect in solar energy utilization.

Performance and optimization study of selected 4-terminal tandem solar cells

Tandem solar cells owing to their layered structure in which each sub-cell utilizes a certain part of the solar spectrum with reduced thermal losses, are promising applicants to promote the power conversion efficiency beyond the Shockley–Queisser limit of single-junction solar cells. This study delves into the performance and optimization of 4-terminal organic/silicon tandem solar cells through numerical simulations using SCAPS-1D software. The tandem architecture combining organic, perovskite, and silicon materials, shows potential in enhancing light absorption across the solar spectrum with complementary absorption spectra. Through innovative material exploration, optimization techniques are explored to advance the performance boundaries of organic/silicon tandem solar cells. The study employs the Beer–Lambert law to assess the impact of varied physical parameters on tandem solar cell efficiency, aiming to propose optimal configurations. Results indicate a maximum efficiency of 25.86% with P3HT:PC70BM organic active layer (150 nm thickness) and 36.8% with Cs2AgBi0.75Sb0.25Br6 active layer (400 nm thickness) in the studied 4-terminal tandem structures. These findings offer valuable insights into the complex physics of these tandem solar cells, for developing high-performance and commercially practical photovoltaic devices.

Assessing the Determinants of Cavity Polariton Relaxation Using Angle-Resolved Photoluminescence Excitation Spectroscopy.

The strong coupling of light and matter within electromagnetic resonators leads to the formation of cavity polaritons whose hybrid nature may help certain ground and excited state chemical processes. To help enable the development of polariton chemistry, we have developed and applied a spectroscopic technique to leverage the relatively larger spatial coherence of polaritons to assess the determinants of relaxation in hybrid light-matter states. By exciting the lower polariton (LP) state in cavity samples filled with different metalloporphyrin chromophores, we measured and modeled angle-resolved photoluminescence excitation spectra. Our results suggest that the shortest lived constituent of the LP state characterized by specific Hopfield coefficients limits the light absorption of the intracavity molecules, which we equate with the effective polariton lifetime. Our results suggest that researchers need to consider the lifetimes of both photons and excitons participating in strong light-matter coupling when designing polaritonic systems and the methods they can use to assess the relaxation of polaritonic states.

Enhancing the Visible Light Photocatalytic Activity of TiO2-Based Coatings by the Addition of Exfoliated g-C3N4

In the last few years, increasing interest from researchers and companies has been shown in the development of photocatalytic coatings for air purification and self-cleaning applications. In order to maintain the photocatalyst’s concentration as low as possible, highly active materials and/or combinations of them are required. In this work, novel photocatalytic formulations containing g-C3N4/TiO2 composites were prepared and deposited in the form of coatings on a-block substrates. The obtained photocatalytic surfaces were tested for NOx and acetaldehyde removal from model air. It was found that the addition of only 0.5 wt% g-C3N4 towards TiO2 content results in over 50% increase in the photocatalytic activity under visible light irradiation in comparison to pure TiO2 coating, while the activity under UV light was not affected. The result was related to the creation of a g-C3N4/TiO2 heterojunction that improves the light absorption and the separation of photogenerated electron-hole pairs, as well as to the inhibition of TiO2 particles’ agglomeration due to the presence of g-C3N4 sheets.

Theoretical study on photoelectric properties of ferroelectric photovoltaic perovskite CsGeBr3 based on first-principle calculations

Ferroelectric photovoltaic materials have attracted great attention because of their unique photoelectric conversion mechanism, high photo-generated voltage, and adjustable polarization intensity. Traditional ferroelectric oxide perovskites such as BaTiO3, BiFeO3, and Pb(ZrTi)O3 have attracted much attention but they are not suitable as light absorbing layers in solar cells, due to the large optical bandgap, low light absorption rate, and small photogenerated current. Therefore, it is necessary to seek prominent materials with both ferroelectric and suitable band gaps. Recently, the evidence of ferroelectricity in the typical three-dimensional all-inorganic halide perovskites CsGeX3, with band gaps of 1.6 eV to 2.3 eV has been confirmed. However, the spontaneous polarization of ferroelectric perovskite CsGeX3 is ∼10 to 20 μc cm−2 which is weaker than that of ABO3 (∼26 to 75 μc cm−2). Strain engineering has a significant influence on the properties of semiconductor materials by controlling the lattice scaling and the internal atomic spacing. Hence, in this work, strain engineering is introduced to adjust the ferroelectric polarization and the photoelectric properties of ferroelectric perovskite CsGeBr3. The calculated results show that when the applied compressive strain increases from 0% to −4%, the spontaneous polarization of ferroelectric perovskite CsGeBr3 increases from 14.23 μc cm−2 to 51.61 μc cm−2, and the band gap reduces from 2.3631 eV to 1.5310 eV. The effective mass of electrons and holes gradually reduces, exciton binding energies decrease from 48 meV to 5 meV, and the optical absorption coefficient is strongly enhanced from 3 × 105 cm−1 to 5 × 105 cm−1 in the visible range. Besides, the power conversion efficiency(PCE) of CsGeBr3 is significantly increased from 16.95% to 26.77%. Therefore, the results indicate that the application of compressive strain can increase the ferroelectric polarization and enhance the original photovoltaic performance of ferroelectric perovskite CsGeBr3. Our theoretical calculations can provide useful insights and beneficial guidance into experimental studies of ferroelectric perovskites in photoelectric applications.

Anti-perovskites for Photovoltaics: Materials Development and Challenges

Abstract For the next-generation solar cells with excellent device efficiency and stability, designing advanced light absorber materials with exceptional optoelectronic properties is extremely crucial. Perovskites have attracted great attention due to their high-power conversion efficiency, and low fabrication cost. Eventhough perovskites achieved the highest efficiency of 25.7% within a decade, lead (Pb) toxicity is one of the main issues that needs to be addressed. Also, they are susceptible to degradation under ambient conditions. On the other hand, anti-perovskites, which are electronically inverted perovskites, possess structural flexibility, environmentally benign chemical composition, appropriate band gap and hence, have the capability to replace perovskites as the absorber layer for next-generation solar cells. Thus, a thorough assessment is urgently required to spark widespread concern in this family of compounds. Based on the current research progress, the potential of anti-perovskites in solar cell research is compiled in this study. The structural variety, optoelectronic characteristics, and uncharted territory of these compounds are covered in great detail. Finally, we have discussed the future research directions for the development of anti-perovskite materials for the next generation efficient and stable solar cells.

Reinforced nanowrinkle electrospun photothermal membranes via solvent‐induced recrystallization

AbstractWearable photothermal materials can capture light energy in nature and convert it into heat energy, which is critical for flexible outdoor sports. However, the conventional flexible photothermal membranes with low specific surface area restrict the maximum photothermal capability, and loose structure of electrospun membrane limits durability of wearable materials. Here, an ultrathin nanostructure candle soot/multi‐walled carbon nanotubes/poly (L‐lactic acid) (CS/MWCNTs/PLLA) photothermal membrane is first prepared via solvent‐induced recrystallization. The white blood cell membrane‐like nanowrinkles with high specific surface area are achieved for the first time and exhibit optimal light absorption. The solvent‐induced recrystallization also enables the membrane to realize large strength and durability. Meanwhile, the membranes also show two‐sided heterochromatic features and transparency in thick and thin situations, respectively, suggesting outstanding fashionability. The nano‐wrinkled photothermal membranes by novel solvent‐induced recrystallization show high flexibility, fashionability, strength, and photothermal characteristics, which have huge potential for outdoor warmth and winter sportswear.image

Schottky junction-mediated carrier separation in BiOBr/Ti3C2Tx van der Waals heterojunction photocatalyst for increased removal of Cr(VI) under visible-light

The photocatalytic removal of pollutants can integrate efficient solar energy utilization with wastewater treatment. Herein, we report a simple strategy to construct BiOBr/Ti3C2Tx composite photocatalysts consisting of self-assembled van der Waals (vdw) heterojunction structures containing Schottky junctions. The vdW interaction between BiOBr and Ti3C2Tx and the structural stability of the catalysts were validated by density functional theory (DFT) calculations and an ab initio molecular dynamic simulation (AIMD). Compared to BiOBr, the BiOBr/Ti3C2Tx composites exhibited an enhanced light absorption capability and photocurrent response, along with a lower carrier recombination rate and charge-transfer resistance. The BiOBr/Ti3C2Tx activity for the photoreduction of hexavalent chromium (Cr(VI)) under visible-light irradiation considerably surpassed that of the original BiOBr (53.9%). Using the BTC-0.8 catalyst (with a Ti3C2Tx: BiOBr mass ratio of 0.8%) optimal reduction efficiency (94.0%) for Cr(VI) with a reaction rate approximately 3.5 times that of pure BiOBr. The BTC-0.8 catalyst was viable over a wide pH range and maintained an 83.9% photoreduction rate after four cycling experiments. The exceptional photocatalytic ability of BiOBr/Ti3C2Tx was achieved because Ti3C2Tx served as an electron injection layer that separated photogenerated carriers. The Schottky junction constructed within the BiOBr/Ti3C2Tx vdW heterojunctions suppressed electron backflow, promoting carrier separation. The excellent photocatalytic performance and strong cyclic stability of BiOBr/Ti3C2Tx demonstrated the considerable application potential of this photocatalyst.

BiOClxM1-x (M=I, Br) solid solution-coupled CdS photocatalysts for enhanced visible light-driven organic pollutants degradation with simultaneous hydrogen production

The construction of Z-scheme heterojunction stands out as one of the most effective modification methods for enhancing the performance of photocatalysts. Therefore, BiOClxM1-x (M=I, Br) solid solution-coupled CdS (BiOClxM1-x/CdS) Z-scheme photocatalysts were successfully synthesized by a hydrothermal-precipitation method. BiOCl0.8I0.2/CdS exhibited notable photocatalytic performance with a hydrogen yield of 261 μmol/g, which was 2.23, 1.56 and 1.44 times higher than that of CdS, BiOCl/CdS and BiOCl0.5Br0.5/CdS, respectively. This improvement can be attributed to two key factors: (1) the formation of BiOClxM1-x (M=I, Br) solid solution enhances visible light absorption; (2) The formation of BiOCl0.8I0.2/CdS (M=I, Br) Z-scheme heterojunctions inhibit the recombination of photogenerated carriers to prolong the lifetime of photogenerated carriers, thus increasing the utilization of the photogenerated carriers. Moreover, BiOCl0.8I0.2/CdS also showed good photocatalytic activity in ROW-DFHP (residual organic wastewater from dark fermentation for hydrogen production), with a hydrogen production rate of 42.83 μmol/g and a mineralization rate of organic pollutants of 31.73%. Cycling experiments, XRD and SEM of the samples before and after the photocatalytic reaction showed that BiOCl0.8I0.2/CdS has good stability. Furthermore, the mechanism of BiOCl0.8I0.2/CdS for the photocatalytic degradation of organic pollutants and simultaneous hydrogen production was proposed, offering a novel strategy for organic wastewater purification and hydrogen energy recovery.

Study on the performance of photothermal catalyzed carbon dioxide hydrogenation to CH4 over doped sodium tantalate-based perovskite catalysts

NaTaO3 (ABO3)-based catalysts with B-site substituted metals M= (Co, Ni, Fe, Ga, Ti) for photothermal-catalyzed carbon dioxide reduction hydrogenation to C1 products were prepared via a simple one-step hydrothermal method. The B-site metal doping catalysts exhibited excellent performance for the aimed photothermal catalytic reaction. Among them, the NaTa0.9Co0.1O3 was the most eye-catching catalyst with a stable crystal cell, an excellent heterojunction structure, and a bandgap structure for light absorption, The fine structure properties results in a low electron-hole recombination rate and high photoelectron transfer efficiency under light conditions. The suitable alkaline adsorption sites and thermal reduction properties also be the effective assistance for the catalytic process. The CO yield and CH4 yield of the NaTa0.9Co0.1O3 catalyst were 6.6 times and 120 times higher than those of the pure-phase NaTaO3, respectively, and the CH4 selectivity was up to 98% under the illumination condition of 300 ℃. For the photothermal hydrogenation reaction, thermal catalysis dominates the reaction, and light illumination promotes the generation and transfer of photogenerated electrons and improves the catalyst stability. The above studies show that NaTaO3 based perovskite has a great potential in the field of photothermal catalyzed carbon dioxide reduction.

Photoacoustic: A Versatile Nongenetic Method for High-Precision Neuromodulation.

ConspectusHigh-precision neuromodulation plays a pivotal role in elucidating fundamental principles of neuroscience and treating specific neurological disorders. Optical neuromodulation, enabled by spatial resolution defined by the diffraction limit at the submicrometer scale, is a general strategy to achieve such precision. Optogenetics offers single-neuron spatial resolution with cellular specificity, whereas the requirement of genetic transfection hinders its clinical application. Direct photothermal modulation, an alternative nongenetic optical approach, often associates a large temperature increase with the risk of thermal damage to surrounding tissues.Photoacoustic (also called optoacoustic) neural stimulation is an emerging technology for neural stimulation with the following key features demonstrated. First, the photoacoustic approach demonstrated high efficacy without the need for genetic modification. The generated pulsed ultrasound upon ns laser pulses with energy ranging from a few μJ to tens of μJ is sufficient to activate wild-type neurons. Second, the photoacoustic approach provides sub-100-μm spatial precision. It overcomes the fundamental wave diffraction limit of ultrasound by harnessing the localized ultrasound field generated through light absorption. A spatial precision of 400 μm has been achieved in rodent brains using a fiber-based photoacoustic emitter. Single-cell stimulation in neuronal cultures in vitro and in brain slices ex vivo is achieved using tapered fiber-based photoacoustic emitters. This precision is 10 to 100 times better than for piezo-based low-frequency ultrasound and is essential to pinpoint a specific region or cell population in a living brain. Third, compared to direct photothermal stimulation via temperature increase, photoacoustic stimulation requires a 40 times less laser energy dose to evoke neuron activities and is associated with a minimal temperature increase of less than 1 °C, preventing potential thermal damage to neurons. Fourth, photoacoustics is a versatile approach and can be designed in various platforms aiming at specific applications. Our team has shown the design of fiber-based photoacoustic emitters, photoacoustic nanotransducers, soft biocompatible photoacoustic films, and soft photoacoustic lenses. Since they interact with neurons through ultrasound without the need for direct contact, photoacoustic enables noninvasive transcranial and dura-penetrating brain stimulation without compromising high precision.In this Account, we will first review the basic principles of photoacoustic and discuss the key design elements of PA transducers for neural modulation guided by the principle. We will also highlight how these design goals were achieved from a materials chemistry perspective. The design of different PA interfaces, their unique capability, and their applications in neural systems will be reviewed. In the end, we will discuss the remaining challenges and future perspectives for this technology.

Metal-Loaded Synthetic Melanin via Oxidative Polymerization of Neurotransmitter Norepinephrine Exhibiting High Photothermal Conversion.

Polydopamine (PDA)-derived melanin-like materials exhibit significant photothermal conversion owing to their broad-spectrum light absorption. However, their low near-infrared (NIR) absorption and inadequate hydrophilicity compromise their utilization of solar energy. Herein, we developed metal-loaded poly(norepinephrine) nanoparticles (PNE NPs) by predoping metal ions (Fe3+, Mn3+, Co2+, Ca2+, Ga3+, and Mg2+) with norepinephrine, a neuron-derived biomimetic molecule, to address the limitations of PDA. The chelation between catechol and metal ions induces a ligand-to-metal charge transfer (LMCT) through the formation of donor-acceptor pairs, modulating the light absorption behavior and reducing the band gap. Under 1 sun illumination, the Fe-loaded PNE coated wood evaporator achieved a high seawater evaporation rate and efficiency of 1.75 kg m-2 h-1 and 92.4%, respectively, owing to the superior hydrophilicity and photothermal performance of PNE. Therefore, this study offers a comprehensive exploration of the role of metal ions in enhancing the photothermal properties of synthetic melanins.

GeC/SnSe2 van der waals heterostructure: A promising direct Z-scheme photocatalyst for overall water splitting with strong optical absorption, high solar-to-hydrogen energy conversion efficiency and superior catalytic activity

To alleviate the energy crisis and achieve green energy conversion, the heterojunctions that can be applied to the photocatalytic decomposition of water have attracted attention. In this paper, we design a novel two-dimensional GeC/SnSe2 heterostructure and investigate in detail the structural stability, electronic characteristics, photocatalytic activity and optical behavior as well as the effects due to the applied strain based on the first-principles. Firstly, the most stable γ-stacking mode is determined by combining energy comparison, thermodynamic and dynamic studies. Second, the analysis of electronic properties demonstrates that the GeC/SnSe2 heterostructure exhibits a type-II energy band arrangement and a direct Z-scheme photocatalytic mechanism. This pivotal aspect enhances the separation of photogenerated carriers at the interface and facilitates the active participation of the most proficient materials in oxidation-reduction processes during photocatalytic hydrolysis reactions. The hydrolysis reaction's Gibbs free energy shift demonstrates the GeC/SnSe2 heterostructure's superior photocatalytic activity in neutral and alkaline environments and can spontaneously carry out the overall hydrolysis reaction, and this outstanding ability is not affected by the −4% to 4% strain range. In addition, the GeC/SnSe2 heterostructure has outstanding solar-to-hydrogen efficiency (58.18%) and excellent light absorption capability (up to 4×105cm−1) within visible light. The implications of these discoveries point towards the direct Z-scheme GeC/SnSe2 heterostructure holds promise as an excellent candidate for photocatalytic water splitting applications.

Revealing the Enhanced Visible-light-driven Photocatalytic Activity of In2S3/CeO2 Heterojunction: Bandgap Structure Analysis and Active Radicals Determination

Background: The widespread presence of persistent organic pollutants, such as dyes in effluent from printing and textile industries, poses a significant threat to aquatic life and human health. Photocatalytic degradation is widely recognized as a promising technology to address this pollution crisis. The efficiency of photocatalysis is intricately tied to both the active radicals and the band structure of the catalyst. These factors play a crucial role in governing the photodegradation of dye molecules. Methods: In2S3/CeO2 heterojunctions were synthesized using an in-situ precipitation method and subsequently analyzed through SEM, XRD, and XPS techniques. Notably, the bandgap structure of the heterojunctions was examined through UV-Vis DRS. The photocatalytic performance of the synthesized samples was assessed by studying the degradation of methyl orange. To further validate the photocatalytic process, EPR spectroscopy was employed to confirm the presence of radicals generated within the heterojunction. Results: The heterojunction displayed a characteristic type-II structure, enhancing light absorption and facilitating the separation of photoinduced carriers. Among the In2S3/CeO2 composites, the one with a 15 wt% CeO2 content exhibited the highest photocatalytic activity, achieving an 88% degradation of methyl orange after 90 min of exposure to visible light irradiation. Additionally, •O2 − is identified as the primary active species responsible for degradation. Conclusion: UV-Vis DRS illustrated the improved transfer and separation of photogenerated electrons attributed to the optimized band structure of the heterojunction. EPR spectroscopy yielded valuable information on active radicals, thereby proposing the photocatalytic degradation mechanism.

Recent progress of group III-V materials-based nanostructures for photodetection.

Due to the suitable bandgap structure, efficient conversion rates of photon to electron, adjustable optical bandgap, high electron mobility/aspect ratio, low defects, and outstanding optical and electrical properties for device design, III-V semiconductors have shown excellent properties for optoelectronic applications, including photodiodes, photodetectors, solar cells, photocatalysis, etc. In particular, III-V nanostructures have attracted considerable interest as a promising photodetector platform, where high-performance photodetectors can be achieved based on the geometry-related light absorption and carrier transport properties of III-V materials. However, the detection range from Ultraviolet to Terahertz including broadband photodetectors of III-V semiconductors still have not been more broadly development despite significant efforts to obtain the high performance of III-V semiconductors. Therefore, the recent development of III-V photodetectors in a broad detection range from Ultraviolet to Terahertz, and future requirements are highly desired.
In this review, the recent development of photodetectors based on III-V semiconductor with different detection range is discussed. First, the bandgap of III-V materials and synthesis methods of III-V nanostructures are explored, subsequently, the detection mechanism and key figures-of-merit for the photodetectors are introduced, and then the device performance and emerging applications of photodetectors are provided. Lastly, the challenges and future research directions of III-V materials for photodetectors are presented.&#xD.